- 15 Nov, 2022 12 commits
-
-
David Galiffi authored
[Why] The visual confirm bar is displayed on all displays, but is only updated on a flip. If an update causes SubVP to be disabled on all displays, but there are no updates on the other displays, it will lead to stale information displayed on the non-active displays. An example of this is playing a fullscreen video on a rotated display. [How] Add a procedure to update visual confirm color for all pipes when committing a plane. Reviewed-by:
Alvin Lee <Alvin.Lee2@amd.com> Acked-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
David Galiffi <David.Galiffi@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Zhongwei Zhang authored
[Why] disable_vbios_mode_if_required() will set dpms_off to false during boot when pixel clk dismatches with driver requires. This will cause extra backlight on and off if OS call 2 times setmode. [How] Set dpms_off to true to keep power_off and let OS control BL by display's powerState. Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
Zhongwei Zhang <Zhongwei.Zhang@amd.com> Tested-by:
-
Stylon Wang authored
[Why] Some DPIA AUX replies have incorrect data length from original request. This could lead to overwriting of destination buffer if reply length is larger, which could cause invalid access to stack since many destination buffers are declared as local variables. [How] Check for invalid length from DPIA AUX replies and trigger a retry if reply length is not the same as original request. A DRM_WARN() dmesg log is also produced. Reviewed-by:
Roman Li <Roman.Li@amd.com> Acked-by:
Stylon Wang <stylon.wang@amd.com> Tested-by:
-
Candice Li authored
TA firmware loaded on psp v13_0_10, but it is missing in modinfo. Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Rodrigo Siqueira authored
On IGT, there is a test named amd_hotplug, and when the subtest basic is executed on DCN31, we get the following error: [drm] *ERROR* [CRTC:71:crtc-0] flip_done timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [CRTC:71:crtc-0] commit wait timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [CONNECTOR:88:DP-1] commit wait timed out [drm] *ERROR* flip_done timed out [drm] *ERROR* [PLANE:59:plane-3] commit wait timed out After enable the page flip log with the below command: echo -n 'format "[PFLIP]" +p' > /sys/kernel/debug/dynamic_debug/control It is possible to see that the flip was submitted, but DC never replied back, which generates time-out issues. This is an indication that the HUBP surface flip is missing. This commit fixes this issue by adding hubp1_set_flip_int to DCN31. Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by:
-
Stylon Wang authored
[Why] Since introduction of patch "Query DPIA HPD status.", link detection at boot could be accessing DPIA AUX, which will not succeed until DMUB outbox messaging is enabled and results in below dmesg logs: [ 160.840227] [drm:amdgpu_dm_process_dmub_aux_transfer_sync [amdgpu]] *ERROR* wait_for_completion_timeout timeout! [How] Enable DMUB outbox messaging before link detection at boot time. Reviewed-by:
Wayne Lin <Wayne.Lin@amd.com> Acked-by:
-
Alex Deucher authored
There are several places where we don't want to check if a particular asic could support DC, but rather, if DC is enabled. Set a flag if DC is enabled and check for that rather than if a device supports DC or not. Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Alex Deucher authored
Move it into the DCE code for each generation. This avoids confusion with the different display paths. v2: no need for a hotplug worker for vkms Acked-by:
-
Alex Deucher authored
virtual display is enabled unconditionally in SR-IOV, but without specifying the virtual_display module, the number of crtcs defaults to 0. Set a single display by default for SR-IOV if the virtual_display parameter is not set. Only enable virtual display by default on SR-IOV on asics which actually have display hardware. Acked-by:
-
Alex Deucher authored
amdgpu_device_asic_has_dc_support() just checks the asic itself. amdgpu_device_has_dc_support() is a runtime check which not only checks the asic, but also other things in the driver like whether virtual display is enabled. We want the latter here. Acked-by:
-
Yifan Zha authored
[Why] GCMC_VM related registers should be programmed by PSP on host side. L1 and RLCG will block these regisers on VF. [How] Remove programming GCMC_VM_FB_LOCATION_BASE/TOP on gfxhub_v3_0_3 under SRIOV VF. Signed-off-by:
Yifan Zha <Yifan.Zha@amd.com> Reviewed-by:
-
YuBiao Wang authored
Do not clear kiq position in RLC_CP_SCHEDULER so that CP could perform IDLE-SAVE after VF fini. CPG also needs to be active in save command. v2: drop unused variable (Alex) Signed-off-by:
YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by:
Luben Tuikov <luben.tuikov@amd.com> Signed-off-by:
-
- 10 Nov, 2022 11 commits
-
-
Dong Chenchen authored
When p->gang_size equals 0, amdgpu_cs_pass1() will return directly without freeing chunk_array, which will cause a memory leak issue, this patch fixes it. Fixes: 4624459c ("drm/amdgpu: add gang submit frontend v6") Reviewed-by:
Dong Chenchen <dongchenchen2@huawei.com> Signed-off-by:
-
Liu Jian authored
Fix below sparse warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_optc.c:244:18: warning: Initializer entry defined twice drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_optc.c:257:18: also defined here Fixes: 5ade1b95 ("drm/amd/display: Add OTG/ODM functions") Signed-off-by:
Liu Jian <liujian56@huawei.com> Signed-off-by:
-
Paulo Miguel Almeida authored
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in structs _ATOM_CONNECTOR_DEVICE_TAG_RECORD, _ATOM_OBJECT_GPIO_CNTL_RECORD, _ATOM_BRACKET_LAYOUT_RECORD, _ATOM_BRACKET_LAYOUT_RECORD, _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3, _ATOM_FUSION_SYSTEM_INFO_V3, _ATOM_I2C_DATA_RECORD, _ATOM_I2C_DEVICE_SETUP_INFO, _ATOM_ASIC_MVDD_INFO and refactor the rest of the code accordingly. While at it, removed a redundant casting. Important to mention is that doing a build before/after this patch results in no binary output differences. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/238 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1] Signed-off-by:
Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com> Signed-off-by:
-
Ville Syrjälä authored
Initialize on-stack modes with drm_mode_init() to guarantee no stack garbage in the list head, or that we aren't copying over another mode's list head. Based on the following cocci script, with manual fixups: @decl@ identifier M; expression E; @@ - struct drm_display_mode M = E; + struct drm_display_mode M; @@ identifier decl.M; expression decl.E; statement S, S1; @@ struct drm_display_mode M; ... when != S + drm_mode_init(&M, &E); + S1 @@ expression decl.E; @@ - &*E + E Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: amd-gfx@lists.freedesktop.org Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Gavin Wan authored
For SRIOV, the guest driver should not do stop rlc. The host handles programing RLC. On SRIOV, the stop rlc will be hang (RLC related registers are blocked by policy) when the RLCG interface is not enabled. Reviewed-by:
Yang Wang <kevinyang.wang@amd.com> Acked-by:
Gavin Wan <Gavin.Wan@amd.com> Signed-off-by:
-
Tong Liu01 authored
Move TMR region from top of FB to 2MB for FFBM, so we need to reserve TMR region firstly to make sure TMR can be allocated at 2MB Signed-off-by:
Tong Liu01 <Tong.Liu01@amd.com> Acked-by:
-
Tao Zhou authored
The initialized status indicates RAS TA is loaded, but in some cases (such as RAS fatal error) RAS TA could be destroyed although it's not unloaded. Hence we load RAS TA unconditionally here. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
-
Kenneth Feng authored
skip disabling all smu features on smu_v13_0_10 in suspend Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
-
Yifan Zhang authored
If discovery is set to 2 in module parameters explicitly, the intention is to use the discovery file in FW rather than the one in BIOS, usually because the latter is incorrect. This patch to force read discovery file if set discovery=2. Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
Tim Huang <Tim.Huang@amd.com> Signed-off-by:
-
Andrew Davis authored
Most Kconfig options to enable a driver are in the Kconfig file inside the relevant directory, move these two to the same. Signed-off-by:
Andrew Davis <afd@ti.com> Reviewed-by:
-
Takashi Iwai authored
This patch adds the support for the notification of HD-audio hotplug via the already existing drm_audio_component framework to radeon driver. This allows us more reliable hotplug notification and ELD transfer without accessing HD-audio bus; it's more efficient, and more importantly, it works without waking up the runtime PM. The implementation is rather simplistic: radeon driver provides the get_eld ops for HD-audio, and it notifies the audio hotplug via pin_eld_notify callback upon each radeon_audio_enable() call. The pin->id is referred as the port number passed to the notifier callback, and the corresponding connector is looked through the encoder list in the get_eld callback in turn. The bind and unbind callbacks handle the device-link so that it assures the PM call order. Also, as a gratis bonus, this patch "fixes" the regression by the recent change in HD-audio to be more strict for the HDMI/DP connection, too. Since the HD-audio HDMI/DP codec requires both the connection bit and the valid ELD to be provided, it started failing on some RADEON gfx boards where the ELD update performed instably. As this change switches the communication to a direct way between the audio and the graphics drivers, now the system receives the proper ELD, and the HDMI/DP hotplug starts working again. [ v2: fix the logic in radeon_audio_component_get_eld to walk the connector list since that is where the EDID lives and we can derive the encoder from the connector because the encoder has not been assigned at this point (i.e., during monitor probe). v3: the component binding is moved outside radeon_audio_init() and _fini(), as those are called from suspend/resume, too. Drop modeset lock calls that caused Oops. Moved Kconfig change so that it can be applied on older kernels. v4: revive drm_modeset_lock*() again, add the missing device_link_remove() call at unbinding v5: squash in mutex fix v6: squash in fix for audio get_eld callback ] Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1569Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
- 09 Nov, 2022 17 commits
-
-
Felix Kuehling authored
The same BO may need different MTYPEs and SNOOP flags in PTEs depending on its current location relative to the mapping GPU. Setting MTYPEs from clients ahead of time is not practical for coherent memory sharing. Instead determine the correct MTYPE for the desired coherence model and current BO location when updating the page tables. To maintain backwards compatibility with MTYPE-selection in AMDGPU_VA_OP_MAP, the coherence-model-based MTYPE selection is only applied if it chooses an MTYPE other than MTYPE_NC (the default). Add two AMDGPU_GEM_CREATE_... flags to indicate the coherence model. The default if no flag is specified is non-coherent (i.e. coarse-grained coherent at dispatch boundaries). Update amdgpu_amdkfd_gpuvm.c to use this new method to choose the correct MTYPE depending on the current memory location. v2: * check that bo is not NULL (e.g. PRT mappings) * Fix missing ~ bitmask in gmc_v11_0.c v3: * squash in "drm/amdgpu: Inherit coherence flags on dmabuf import" Suggested-by:
Felix Kuehling <Felix.Kuehling@amd.com> Acked-by:
-
Hamza Mahfooz authored
Currently, we are calling fill_dc_dirty_rects() even if PSR isn't supported by the relevant link in amdgpu_dm_commit_planes(), this is undesirable especially because when drm.debug is enabled we are printing messages in fill_dc_dirty_rects() that are only useful for debugging PSR (and confusing otherwise). So, we can instead limit the filling of dirty rectangles to only when PSR is enabled. Reviewed-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
LongJun Tang authored
In dcn*_clock_source_create when dcn*_clk_src_construct fails allocated clk_src needs release. A local attack could use this to cause memory exhaustion. Signed-off-by:
LongJun Tang <tanglongjun@kylinos.cn> Signed-off-by:
-
Paulo Miguel Almeida authored
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in structs _ATOM_GPIO_PIN_ASSIGNMENT, _ATOM_DISPLAY_OBJECT_PATH, _ATOM_DISPLAY_OBJECT_PATH_TABLE, _ATOM_OBJECT_TABLE and refactor the rest of the code accordingly. Important to mention is that doing a build before/after this patch results in no functional binary output differences. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/238 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1] Signed-off-by:
-
Hanjun Guo authored
When the radeon driver reads the bios information from ACPI table in radeon_acpi_vfct_bios(), it misses to call acpi_put_table() to release the ACPI memory after the init, so add acpi_put_table() properly to fix the memory leak. v2: fix text formatting (Alex) Fixes: 268ba0a9 ("drm/radeon: implement ACPI VFCT vbios fetch (v3)") Signed-off-by:
Hanjun Guo <guohanjun@huawei.com> Signed-off-by:
-
Harsh Jain authored
change guarantees that gfxoff is allowed before moving further in s2idle sequence to add more reliablity about gfxoff in amdgpu IP's suspend flow Signed-off-by:
Harsh Jain <harsh.jain@amd.com> Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Luben Tuikov authored
Abstract RAS I2C EEPROM addresses from chip names, and set their macro definition names to the address they set, not the chip they attach to. Since most chips either use I2C EEPROM address 0 or 40000h for the RAS table start offset, this leaves us with only two macro definitions as opposed to five, and removes the redundancy of four. Cc: Candice Li <candice.li@amd.com> Cc: Tao Zhou <tao.zhou1@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by:
Kent Russell <kent.russell@amd.com> Reviewed-by:
-
Luben Tuikov authored
Remove redundant EEPROM_I2C_MADDR_54H address, since we already have it represented (ARCTURUS), and since we don't include the I2C device type identifier in EEPROM memory addresses, i.e. that high up in the device abstraction--we only use EEPROM memory addresses, as memory is continuously represented by EEPROM device(s) on the I2C bus. Add a comment describing what these memory addresses are, how they come about and how they're usually extracted from the device address byte. Cc: Candice Li <candice.li@amd.com> Cc: Tao Zhou <tao.zhou1@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Fixes: c9bdc6c3 ("drm/amdgpu: Add EEPROM I2C address support for ip discovery") Signed-off-by:
-
Ma Jun authored
kfd_fill_cache_non_crat_info() is only used in kfd_topology.c, so make it as static. Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Kenneth Feng authored
enable mode1 reset and prioritize debug port on smu_v13_0_10 as a more reliable message processing v2 - move mode1 reset callback to smu_v13_0_0_ppt.c Signed-off-by:
-
Ma Jun authored
Fix the memory overrun issue caused by wrong array size. Signed-off-by:
coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1527133 ("Memory - corruptions") Fixes: c0cc999f ("drm/amdkfd: Fix the warning of array-index-out-of-bounds") Signed-off-by:
-
Guchun Chen authored
Still avoid intermittent failure. Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Acked-by:
-
Philip Yang authored
Re-take the eviction lock immediately again after the allocation is completed, to fix circular locking warning with drm_buddy allocator. Move amdgpu_vm_eviction_lock/unlock/trylock to amdgpu_vm.h as they are called from multiple files. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
-
Philip Yang authored
Get below kernel WARNING backtrace when pressing ctrl-C to kill kfdtest application. If amdgpu_cs_parser_bos returns error after taking bo_list_mutex, as caller amdgpu_cs_ioctl will not unlock bo_list_mutex, this generates the kernel WARNING. Add unlock bo_list_mutex after amdgpu_cs_parser_bos error handling to cleanup bo_list userptr bo. WARNING: kfdtest/2930 still has locks held! 1 lock held by kfdtest/2930: (&list->bo_list_mutex){+.+.}-{3:3}, at: amdgpu_cs_ioctl+0xce5/0x1f10 [amdgpu] stack backtrace: dump_stack_lvl+0x44/0x57 get_signal+0x79f/0xd00 arch_do_signal_or_restart+0x36/0x7b0 exit_to_user_mode_prepare+0xfd/0x1b0 syscall_exit_to_user_mode+0x19/0x40 do_syscall_64+0x40/0x80 Signed-off-by: -
Aric Cyr authored
DC version 3.2.211 brings along the following fixes: - Wait for VBLANK during pipe programming - Adding HDMI SCDC DEVICE_ID define - Cursor update refactor: PSR-SU support condition - Update 709 gamma to 2.222 as stated in the standerd - Consider dp cable id only when data is non zero - Waiting for 1 frame to fix the flash issue on PSR1 - Update SR watermarks for DCN314 - Allow tuning DCN314 bounding box - Zeromem mypipe heap struct before using it - Use min transition for SubVP into MPO - Disable phantom OTG after enable for plane disable - Disable DRR actions during state commit - Fix fallback issues for DP LL 1.4a tests - Fix FCLK deviation and tool compile issues - Fix reg timeout in enc314_enable_fifo - Fix gpio port mapping issue - Only update link settings after successful MST link train - Enforce minimum prefetch time for low memclk on DCN32 - Set correct EOTF and Gamut flag in VRR info - Add margin for max vblank time for SubVP + DRR - Populate DP2.0 output type for DML pipe Acked-by:
Alan Liu <HaoPing.Liu@amd.com> Reviewed-by:
-
Asher Song authored
This reverts commit 4545ae2e. The origin patch "drm/amdgpu: getting fan speed pwm for vega10 properly" works fine. Test failure is caused by test case self. Signed-off-by:
Asher Song <Asher.Song@amd.com> Reviewed-by:
-
Rajneesh Bhardwaj authored
amdgpu_ttm_tt_set_userptr() is also called by the KFD as part of initializing the user pages for userptr BOs and also while initializing the GPUVM for a KFD process so update the function description. Reviewed-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by:
-
