- 22 Apr, 2020 40 commits
-
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit a246b4d5 upstream. Make sure to check that we have two alternate settings and at least one endpoint before accessing the second altsetting structure and dereferencing the endpoint arrays. This specifically avoids dereferencing NULL-pointers or corrupting memory when a device does not have the expected descriptors. Note that the sanity check in cit_get_packet_size() is not redundant as the driver is mixing looking up altsettings by index and by number, which may not coincide. Fixes: 659fefa0 ("V4L/DVB: gspca_xirlink_cit: Add support for camera with a bcd version of 0.01") Fixes: 59f8b0bf ("V4L/DVB: gspca_xirlink_cit: support bandwidth changing for devices with 1 alt setting") Cc: stable <stable@vger.kernel.org> # 2.6.37 Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 485b06aa upstream. Make sure to check that we have two alternate settings and at least one endpoint before accessing the second altsetting structure and dereferencing the endpoint arrays. This specifically avoids dereferencing NULL-pointers or corrupting memory when a device does not have the expected descriptors. Note that the sanity checks in stv06xx_start() and pb0100_start() are not redundant as the driver is mixing looking up altsettings by index and by number, which may not coincide. Fixes: 8668d504 ("V4L/DVB (12082): gspca_stv06xx: Add support for st6422 bridge and sensor") Fixes: c0b33bdc ("[media] gspca-stv06xx: support bandwidth changing") Cc: stable <stable@vger.kernel.org> # 2.6.31 Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit f5298101 upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid submitting an URB to an invalid endpoint. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: c4018fa2 ("[media] dib0700: fix RC support on Hauppauge Nova-TD") Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 99891234 upstream. Make sure to check that we have at least one endpoint before accessing the endpoint array to avoid dereferencing a NULL-pointer on stream start. Note that these sanity checks are not redundant as the driver is mixing looking up altsettings by index and by number, which need not coincide. Fixes: 1876bb92 ("V4L/DVB (12079): gspca_ov519: add support for the ov511 bridge") Fixes: b282d873 ("V4L/DVB (12080): gspca_ov519: Fix ov518+ with OV7620AE (Trust spacecam 320)") Cc: stable <stable@vger.kernel.org> # 2.6.31 Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit a65cab7d upstream. Reading from a debugfs file at a nonzero position, without first reading at position 0, leaks uninitialized memory to userspace. It's a bit tricky to do this, since lseek() and pread() aren't allowed on these files, and write() doesn't update the position on them. But writing to them with splice() *does* update the position: #define _GNU_SOURCE 1 #include <fcntl.h> #include <stdio.h> #include <unistd.h> int main() { int pipes[2], fd, n, i; char buf[32]; pipe(pipes); write(pipes[1], "0", 1); fd = open("/sys/kernel/debug/fault_around_bytes", O_RDWR); splice(pipes[0], NULL, fd, NULL, 1, 0); n = read(fd, buf, sizeof(buf)); for (i = 0; i < n; i++) printf("%02x", buf[i]); printf("\n"); } Output: 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a30 Fix the infoleak by making simple_attr_read() always fill simple_attr::get_buf if it hasn't been filled yet. Reported-by: syzbot+fcab69d1ada3e8d6f06b@syzkaller.appspotmail.com Reported-by:
Alexander Potapenko <glider@google.com> Fixes: acaefc25 ("[PATCH] libfs: add simple attribute files") Cc: stable@vger.kernel.org Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20200308023849.988264-1-ebiggers@kernel.orgSigned-off-by:
-
Qiujun Huang authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 1165dd73 upstream. We can't handle the case length > WLAN_DATA_MAXLEN. Because the size of rxfrm->data is WLAN_DATA_MAXLEN(2312), and we can't read more than that. Thanks-to: Hillf Danton <hdanton@sina.com> Reported-and-tested-by: syzbot+7d42d68643a35f71ac8a@syzkaller.appspotmail.com Signed-off-by:
Qiujun Huang <hqjagain@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200326131850.17711-1-hqjagain@gmail.comSigned-off-by:
-
Larry Finger authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 38ef48f7 upstream. The ASUS USB-N10 Nano B1 has been reported as a new RTL8188EU device. Add it to the device tables. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Reported-by:
kovi <zraetn@gmail.com> Cc: Stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200321180011.26153-1-Larry.Finger@lwfinger.netSigned-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 536f561d upstream. The driver was issuing synchronous uninterruptible control requests without using a timeout. This could lead to the driver hanging on various user requests due to a malfunctioning (or malicious) device until the device is physically disconnected. The USB upper limit of five seconds per request should be more than enough. Fixes: f3d27f34 ("[media] usbtv: Add driver for Fushicai USBTV007 video frame grabber") Fixes: c53a846c ("[media] usbtv: add video controls") Cc: stable <stable@vger.kernel.org> # 3.11 Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Reviewed-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit bca243b1 upstream. commit 1b976fc6 ("media: b2c2-flexcop-usb: add sanity checking") added an endpoint sanity check to address a NULL-pointer dereference on probe. Unfortunately the check was done on the current altsetting which was later changed. Fix this by moving the sanity check to after the altsetting is changed. Fixes: 1b976fc6 ("media: b2c2-flexcop-usb: add sanity checking") Cc: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Mans Rullgard authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 52974d94 upstream. When handling a PIO bulk transfer with highmem buffer, a temporary mapping is assigned to urb->transfer_buffer. After the transfer is complete, an invalid address is left behind in this pointer. This is not ordinarily a problem since nothing touches that buffer before the urb is released. However, when usbmon is active, usbmon_urb_complete() calls (indirectly) mon_bin_get_data() which does access the transfer buffer if it is set. To prevent an invalid memory access here, reset urb->transfer_buffer to NULL when finished (musb_host_rx()), or do not set it at all (musb_host_tx()). Fixes: 8e8a5516 ("usb: musb: host: Handle highmem in PIO mode") Signed-off-by:
Mans Rullgard <mans@mansr.com> Cc: stable@vger.kernel.org Signed-off-by:
Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20200316211136.2274-8-b-liu@ti.comSigned-off-by:
-
Qiujun Huang authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 57aa9f29 upstream. Fix slab-out-of-bounds read in the interrupt-URB completion handler. The boundary condition should be (length - 1) as we access data[position + 1]. Reported-and-tested-by: syzbot+37ba33391ad5f3935bbd@syzkaller.appspotmail.com Signed-off-by:
-
Matthias Reichl authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 62d65bdd upstream. commit b401f8c4 ("USB: cdc-acm: fix rounding error in TIOCSSERIAL") introduced a regression by changing the order of capability and close settings change checks. When running with CAP_SYS_ADMIN setting the close settings to the values already set resulted in -EOPNOTSUPP. Fix this by changing the check order back to how it was before. Fixes: b401f8c4 ("USB: cdc-acm: fix rounding error in TIOCSSERIAL") Cc: Anthony Mallet <anthony.mallet@laas.fr> Cc: stable <stable@vger.kernel.org> Cc: Oliver Neukum <oneukum@suse.com> Signed-off-by:
Matthias Reichl <hias@horus.com> Link: https://lore.kernel.org/r/20200327150350.3657-1-hias@horus.comSigned-off-by:
-
Pawel Dembicki authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit dfee7e2f upstream. This modem is embedded on dlink dwr-960 router. The oem configuration states: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=d191 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution Signed-off-by:
Pawel Dembicki <paweldembicki@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Pawel Dembicki authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 6cb2669c upstream. BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem. Tested hardware BM806U is mounted on D-Link DWR-921-C3 router. T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2033 Rev= 2.28 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=f842866cfd5a C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Co-developed-by:
Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by:
-
Pawel Dembicki authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 007d20dc upstream. ASKEY WWHC050 is a mcie LTE modem. The oem configuration states: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1690 ProdID=7588 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=813f0eef6e6e C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution. Co-developed-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit be40920f ] When I tried to compile tools/perf from the top directory with the -C option, the O= option didn't work correctly if I passed a relative path: $ make O=BUILD -C tools/perf/ make: Entering directory '/home/mhiramat/ksrc/linux/tools/perf' BUILD: Doing 'make -j8' parallel build ../scripts/Makefile.include:4: *** O=/home/mhiramat/ksrc/linux/tools/perf/BUILD does not exist. Stop. make: *** [Makefile:70: all] Error 2 make: Leaving directory '/home/mhiramat/ksrc/linux/tools/perf' The O= directory existence check failed because the check script ran in the build target directory instead of the directory where I ran the make command. To fix that, once change directory to $(PWD) and check O= directory, since the PWD is set to where the make command runs. Fixes: c883122a ("perf tools: Let O= makes handle relative paths") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/158351957799.3363.15269768530697526765.stgit@devnote2Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Torsten Hilbrich authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 2a9de3af upstream. The vti6_rcv function performs some tests on the retrieved tunnel including checking the IP protocol, the XFRM input policy, the source and destination address. In all but one places the skb is released in the error case. When the input policy check fails the network packet is leaked. Using the same goto-label discard in this case to fix this problem. Fixes: ed1efb2a ("ipv6: Add support for IPsec virtual tunnel interfaces") Signed-off-by:
Torsten Hilbrich <torsten.hilbrich@secunet.com> Reviewed-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 4c59406e upstream. After xfrm_add_policy add a policy, its ref is 2, then xfrm_policy_timer read_lock xp->walk.dead is 0 .... mod_timer() xfrm_policy_kill policy->walk.dead = 1 .... del_timer(&policy->timer) xfrm_pol_put //ref is 1 xfrm_pol_put //ref is 0 xfrm_policy_destroy call_rcu xfrm_pol_hold //ref is 1 read_unlock xfrm_pol_put //ref is 0 xfrm_policy_destroy call_rcu xfrm_policy_destroy is called twice, which may leads to double free. Call Trace: RIP: 0010:refcount_warn_saturate+0x161/0x210 ... xfrm_policy_timer+0x522/0x600 call_timer_fn+0x1b3/0x5e0 ? __xfrm_decode_session+0x2990/0x2990 ? msleep+0xb0/0xb0 ? _raw_spin_unlock_irq+0x24/0x40 ? __xfrm_decode_session+0x2990/0x2990 ? __xfrm_decode_session+0x2990/0x2990 run_timer_softirq+0x5c5/0x10e0 Fix this by use write_lock_bh in xfrm_policy_kill. Fixes: ea2dea9d ("xfrm: remove policy lock when accessing policy->walk.dead") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Timo Teräs <timo.teras@iki.fi> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit a1a7e3a3 upstream. Without doing verify_sec_ctx_len() check in xfrm_add_acquire(), it may be out-of-bounds to access uctx->ctx_str with uctx->ctx_len, as noticed by syz: BUG: KASAN: slab-out-of-bounds in selinux_xfrm_alloc_user+0x237/0x430 Read of size 768 at addr ffff8880123be9b4 by task syz-executor.1/11650 Call Trace: dump_stack+0xe8/0x16e print_address_description.cold.3+0x9/0x23b kasan_report.cold.4+0x64/0x95 memcpy+0x1f/0x50 selinux_xfrm_alloc_user+0x237/0x430 security_xfrm_policy_alloc+0x5c/0xb0 xfrm_policy_construct+0x2b1/0x650 xfrm_add_acquire+0x21d/0xa10 xfrm_user_rcv_msg+0x431/0x6f0 netlink_rcv_skb+0x15a/0x410 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x50e/0x6a0 netlink_sendmsg+0x8ae/0xd40 sock_sendmsg+0x133/0x170 ___sys_sendmsg+0x834/0x9a0 __sys_sendmsg+0x100/0x1e0 do_syscall_64+0xe5/0x660 entry_SYSCALL_64_after_hwframe+0x6a/0xdf So fix it by adding the missing verify_sec_ctx_len check there. Fixes: 980ebd25 ("[IPSEC]: Sync series - acquire insert") Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 171d449a upstream. It's not sufficient to do 'uctx->len != (sizeof(struct xfrm_user_sec_ctx) + uctx->ctx_len)' check only, as uctx->len may be greater than nla_len(rt), in which case it will cause slab-out-of-bounds when accessing uctx->ctx_str later. This patch is to fix it by return -EINVAL when uctx->len > nla_len(rt). Fixes: df71837d ("[LSM-IPSec]: Security association restriction.") Signed-off-by:
-
Nicolas Dichtel authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit f1ed1026 upstream. I forgot the 4in6/6in4 cases in my previous patch. Let's fix them. Fixes: 95224166 ("vti[6]: fix packet tx through bpf_redirect()") Signed-off-by:
-
Edward Cree authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit df81dfcf upstream. The handling of notify->work did not properly maintain notify->kref in two cases: 1) where the work was already scheduled, another irq_set_affinity_locked() would get the ref and (no-op-ly) schedule the work. Thus when irq_affinity_notify() ran, it would drop the original ref but not the additional one. 2) when cancelling the (old) work in irq_set_affinity_notifier(), if there was outstanding work a ref had been got for it but was never put. Fix both by checking the return values of the work handling functions (schedule_work() for (1) and cancel_work_sync() for (2)) and put the extra ref if the return value indicates preexisting work. Fixes: cd7eab44 ("genirq: Add IRQ affinity notifiers") Fixes: 59c39840 ("genirq: Prevent use-after-free and work list corruption") Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Ben Hutchings <ben@decadent.org.uk> Link: https://lkml.kernel.org/r/24f5983f-2ab5-e83a-44ee-a45b5f9300f5@solarflare.comSigned-off-by:
-
Johannes Berg authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit b16798f5 upstream. If a station is still marked as authorized, mark it as no longer so before removing its keys. This allows frames transmitted to it to be rejected, providing additional protection against leaking plain text data during the disconnection flow. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200326155133.ccb4fb0bb356.If48f0f0504efdcf16b8921f48c6d3bb2cb763c99@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Martin K. Petersen authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit ea697a8b upstream. Some USB bridge devices will return a default set of characteristics during initialization. And then, once an attached drive has spun up, substitute the actual parameters reported by the drive. According to the SCSI spec, the device should return a UNIT ATTENTION in case any reported parameters change. But in this case the change is made silently after a small window where default values are reported. Commit a83da8a4 ("scsi: sd: Optimal I/O size should be a multiple of physical block size") validated the reported optimal I/O size against the physical block size to overcome problems with devices reporting nonsensical transfer sizes. However, this validation did not account for the fact that aforementioned devices will return default values during a brief window during spin-up. The subsequent change in reported characteristics would invalidate the checking that had previously been performed. Unset a previously configured optimal I/O size should the sanity checking fail on subsequent revalidate attempts. Link: https://lore.kernel.org/r/33fb522e-4f61-1b76-914f-c9e6a3553c9b@gmail.com Cc: Bryan Gurney <bgurney@redhat.com> Cc: <stable@vger.kernel.org> Reported-by:
Bernhard Sulzer <micraft.b@gmail.com> Tested-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Dirk Mueller authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit e33a814e upstream. gcc 10 will default to -fno-common, which causes this error at link time: (.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here This is because both dtc-lexer as well as dtc-parser define the same global symbol yyloc. Before with -fcommon those were merged into one defintion. The proper solution would be to to mark this as "extern", however that leads to: dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls] 26 | extern YYLTYPE yylloc; | ^~~~~~ In file included from dtc-lexer.l:24: dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here 127 | extern YYLTYPE yylloc; | ^~~~~~ cc1: all warnings being treated as errors which means the declaration is completely redundant and can just be dropped. Signed-off-by:
Dirk Mueller <dmueller@suse.com> Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> [robh: cherry-pick from upstream] Cc: stable@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> [nc: Also apply to dtc-lexer.lex.c_shipped due to a lack of e039139b, where dtc-lexer.l started being used] Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 1efde275 upstream. Do not depend on dwfl_module_addrsym() because it can fail on user-space shared libraries. Actually, same bug was fixed by commit 664fee3d ("perf probe: Do not use dwfl_module_addrsym if dwarf_diename finds symbol name"), but commit 07d36985 ("perf probe: Fix wrong address verification) reverted to get actual symbol address from symtab. This fixes it again by getting symbol address from DIE, and only if the DIE has only address range, it uses dwfl_module_addrsym(). Fixes: 07d36985 ("perf probe: Fix wrong address verification) Reported-by:
Alexandre Ghiti <alex@ghiti.fr> Signed-off-by:
-
Chuhong Yuan authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit e1b9f99f upstream. The driver forgets to disable and unprepare clk when remove. Add a call to clk_disable_unprepare to fix it. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by:
-
Dominik Czarnota authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit f3cc008b ] This patch fixes an off-by-one error in strncpy size argument in drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c. The issue is that in: strncmp(opt, "eee_timer:", 6) the passed string literal: "eee_timer:" has 10 bytes (without the NULL byte) and the passed size argument is 6. As a result, the logic will also accept other, malformed strings, e.g. "eee_tiXXX:". This bug doesn't seem to have any security impact since its present in module's cmdline parsing code. Signed-off-by:
Dominik Czarnota <dominik.b.czarnota@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Nicolas Cavallari authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit ba32679c ] When trying to transmit to an unknown destination, the mesh code would unconditionally transmit a HWMP PREQ even if HWMP is not the current path selection algorithm. Signed-off-by:
Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Link: https://lore.kernel.org/r/20200305140409.12204-1-cavallar@lri.frSigned-off-by:
-
Wen Xiong authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 394b6171 ] When trying to rescan disks in petitboot shell, we hit the following softlockup stacktrace: Kernel panic - not syncing: System is deadlocked on memory [ 241.223394] CPU: 32 PID: 693 Comm: sh Not tainted 5.4.16-openpower1 #1 [ 241.223406] Call Trace: [ 241.223415] [c0000003f07c3180] [c000000000493fc4] dump_stack+0xa4/0xd8 (unreliable) [ 241.223432] [c0000003f07c31c0] [c00000000007d4ac] panic+0x148/0x3cc [ 241.223446] [c0000003f07c3260] [c000000000114b10] out_of_memory+0x468/0x4c4 [ 241.223461] [c0000003f07c3300] [c0000000001472b0] __alloc_pages_slowpath+0x594/0x6d8 [ 241.223476] [c0000003f07c3420] [c00000000014757c] __alloc_pages_nodemask+0x188/0x1a4 [ 241.223492] [c0000003f07c34a0] [c000000000153e10] alloc_pages_current+0xcc/0xd8 [ 241.223508] [c0000003f07c34e0] [c0000000001577ac] alloc_slab_page+0x30/0x98 [ 241.223524] [c0000003f07c3520] [c0000000001597fc] new_slab+0x138/0x40c [ 241.223538] [c0000003f07c35f0] [c00000000015b204] ___slab_alloc+0x1e4/0x404 [ 241.223552] [c0000003f07c36c0] [c00000000015b450] __slab_alloc+0x2c/0x48 [ 241.223566] [c0000003f07c36f0] [c00000000015b754] kmem_cache_alloc_node+0x9c/0x1b4 [ 241.223582] [c0000003f07c3760] [c000000000218c48] blk_alloc_queue_node+0x34/0x270 [ 241.223599] [c0000003f07c37b0] [c000000000226574] blk_mq_init_queue+0x2c/0x78 [ 241.223615] [c0000003f07c37e0] [c0000000002ff710] scsi_mq_alloc_queue+0x28/0x70 [ 241.223631] [c0000003f07c3810] [c0000000003005b8] scsi_alloc_sdev+0x184/0x264 [ 241.223647] [c0000003f07c38a0] [c000000000300ba0] scsi_probe_and_add_lun+0x288/0xa3c [ 241.223663] [c0000003f07c3a00] [c000000000301768] __scsi_scan_target+0xcc/0x478 [ 241.223679] [c0000003f07c3b20] [c000000000301c64] scsi_scan_channel.part.9+0x74/0x7c [ 241.223696] [c0000003f07c3b70] [c000000000301df4] scsi_scan_host_selected+0xe0/0x158 [ 241.223712] [c0000003f07c3bd0] [c000000000303f04] store_scan+0x104/0x114 [ 241.223727] [c0000003f07c3cb0] [c0000000002d5ac4] dev_attr_store+0x30/0x4c [ 241.223741] [c0000003f07c3cd0] [c0000000001dbc34] sysfs_kf_write+0x64/0x78 [ 241.223756] [c0000003f07c3cf0] [c0000000001da858] kernfs_fop_write+0x170/0x1b8 [ 241.223773] [c0000003f07c3d40] [c0000000001621fc] __vfs_write+0x34/0x60 [ 241.223787] [c0000003f07c3d60] [c000000000163c2c] vfs_write+0xa8/0xcc [ 241.223802] [c0000003f07c3db0] [c000000000163df4] ksys_write+0x70/0xbc [ 241.223816] [c0000003f07c3e20] [c00000000000b40c] system_call+0x5c/0x68 As a part of the scan process Linux will allocate and configure a scsi_device for each target to be scanned. If the device is not present, then the scsi_device is torn down. As a part of scsi_device teardown a workqueue item will be scheduled and the lockups we see are because there are 250k workqueue items to be processed. Accoding to the specification of SIS-64 sas controller, max_channel should be decreased on SIS-64 adapters to 4. The patch fixes softlockup issue. Thanks for Oliver Halloran's help with debugging and explanation! Link: https://lore.kernel.org/r/1583510248-23672-1-git-send-email-wenxiong@linux.vnet.ibm.comSigned-off-by:
Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by:
-
Madalin Bucur authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 26d5bb9e ] FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak; thus stopping further packet processing. The FMAN internal queue can overflow when FMAN splits single read or write transactions into multiple smaller transactions such that more than 17 AXI transactions are in flight from FMAN to interconnect. When the FMAN internal queue overflows, it can stall further packet processing. The issue can occur with any one of the following three conditions: 1. FMAN AXI transaction crosses 4K address boundary (Errata A010022) 2. FMAN DMA address for an AXI transaction is not 16 byte aligned, i.e. the last 4 bits of an address are non-zero 3. Scatter Gather (SG) frames have more than one SG buffer in the SG list and any one of the buffers, except the last buffer in the SG list has data size that is not a multiple of 16 bytes, i.e., other than 16, 32, 48, 64, etc. With any one of the above three conditions present, there is likelihood of stalled FMAN packet processing, especially under stress with multiple ports injecting line-rate traffic. To avoid situations that stall FMAN packet processing, all of the above three conditions must be avoided; therefore, configure the system with the following rules: 1. Frame buffers must not span a 4KB address boundary, unless the frame start address is 256 byte aligned 2. All FMAN DMA start addresses (for example, BMAN buffer address, FD[address] + FD[offset]) are 16B aligned 3. SG table and buffer addresses are 16B aligned and the size of SG buffers are multiple of 16 bytes, except for the last SG buffer that can be of any size. Additional workaround notes: - Address alignment of 64 bytes is recommended for maximally efficient system bus transactions (although 16 byte alignment is sufficient to avoid the stall condition) - To support frame sizes that are larger than 4K bytes, there are two options: 1. Large single buffer frames that span a 4KB page boundary can be converted into SG frames to avoid transaction splits at the 4KB boundary, 2. Align the large single buffer to 256B address boundaries, ensure that the frame address plus offset is 256B aligned. - If software generated SG frames have buffers that are unaligned and with random non-multiple of 16 byte lengths, before transmitting such frames via FMAN, frames will need to be copied into a new single buffer or multiple buffer SG frame that is compliant with the three rules listed above. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
Mike Gilbert authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 2de7fb60 ] Building cpupower with -fno-common in CFLAGS results in errors due to multiple definitions of the 'cpu_count' and 'start_time' variables. ./utils/idle_monitor/snb_idle.o:./utils/idle_monitor/cpupower-monitor.h:28: multiple definition of `cpu_count'; ./utils/idle_monitor/nhm_idle.o:./utils/idle_monitor/cpupower-monitor.h:28: first defined here ... ./utils/idle_monitor/cpuidle_sysfs.o:./utils/idle_monitor/cpuidle_sysfs.c:22: multiple definition of `start_time'; ./utils/idle_monitor/amd_fam14h_idle.o:./utils/idle_monitor/amd_fam14h_idle.c:85: first defined here The -fno-common option will be enabled by default in GCC 10. Bug: https://bugs.gentoo.org/707462Signed-off-by:
Mike Gilbert <floppym@gentoo.org> Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Sabrina Dubroca authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 28d35bcd ] When an MTU update with PMTU smaller than net.ipv4.route.min_pmtu is received, we must clamp its value. However, we can receive a PMTU exception with PMTU < old_mtu < ip_rt_min_pmtu, which would lead to an increase in PMTU. To fix this, take the smallest of the old MTU and ip_rt_min_pmtu. Before this patch, in case of an update, the exception's MTU would always change. Now, an exception can have only its lock flag updated, but not the MTU, so we need to add a check on locking to the following "is this exception getting updated, or close to expiring?" test. Fixes: d52e5a7e ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtu") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Matthew Wilcox authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit b76ba4af ] radix_tree_is_indirect_ptr() is an internal API. The correct call to use is radix_tree_deref_retry() which has the appropriate unlikely() annotation. Fixes: c6400ba7 ("drivers/hwspinlock: fix race between radix tree insertion and lookup") Signed-off-by:
Matthew Wilcox <willy@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Jan Kara <jack@suse.com> Cc: Neil Brown <neilb@suse.de> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Sean Christopherson authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit c4409905 ] Re-execution after an emulation decode failure is only intended to handle a case where two or vCPUs race to write a shadowed page, i.e. we should never re-execute an instruction as part of MMIO emulation. As handle_ept_misconfig() is only used for MMIO emulation, it should pass EMULTYPE_NO_REEXECUTE when using the emulator to skip an instr in the fast-MMIO case where VM_EXIT_INSTRUCTION_LEN is invalid. And because the cr2 value passed to x86_emulate_instruction() is only destined for use when retrying or reexecuting, we can simply call emulate_instruction(). Fixes: d391f120 ("x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested") Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Jonas Gorski authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit efc45154 ] Fix a wrong condition preventing the higher net device flags IFF_LOWER_UP etc to be defined if net/if.h is included before linux/if.h. The comment makes it clear the intention was to allow partial definition with either parts. This fixes compilation of userspace programs trying to use IFF_LOWER_UP, IFF_DORMANT or IFF_ECHO. Fixes: 4a91cb61 ("uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h") Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by:
Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by:
-
Alaa Hleihel authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 14fa91e0 ] netdev_wait_allrefs() could rebroadcast NETDEV_UNREGISTER event multiple times until all refs are gone, which will result in calling ipoib_delete_debug_files multiple times and printing a warning. Remove the WARN_ONCE since checks of NULL pointers before calling debugfs_remove are not needed. Fixes: 771a5258 ("IB/IPoIB: ibX: failed to create mcg debug file") Signed-off-by:
Alaa Hleihel <alaa@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Eugenio Pérez authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 42d84c84 ] Doing so, we save one call to get data we already have in the struct. Also, since there is no guarantee that getname use sockaddr_ll parameter beyond its size, we add a little bit of security here. It should do not do beyond MAX_ADDR_LEN, but syzbot found that ax25_getname writes more (72 bytes, the size of full_sockaddr_ax25, versus 20 + 32 bytes of sockaddr_ll + MAX_ADDR_LEN in syzbot repro). Fixes: 3a4d5c94 ("vhost_net: a kernel-level virtio server") Reported-by: syzbot+f2a62d07a5198c819c7b@syzkaller.appspotmail.com Signed-off-by:
Eugenio Pérez <eperezma@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Taehee Yoo authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 09e91dbe ] The hsr module has been supporting the list and status command. (HSR_C_GET_NODE_LIST and HSR_C_GET_NODE_STATUS) These commands send node information to the user-space via generic netlink. But, in the non-init_net namespace, these commands are not allowed because .netnsok flag is false. So, there is no way to get node information in the non-init_net namespace. Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Taehee Yoo authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit ca19c70f ] The hsr_get_node_list() is to send node addresses to the userspace. If there are so many nodes, it could fail because of buffer size. In order to avoid this failure, the restart routine is added. Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by:
-
