- 14 Jan, 2020 40 commits
-
-
Tony Lindgren authored
commit 049226b9 upstream. We must let the USB host idle things properly before we switch to debug UART mode. Otherwise the USB host may never idle after disconnecting devices, and that causes the next enumeration to be flakey. Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Acked-by:
Pavel Machek <pavel@ucw.cz> Fixes: 6d6ce40f ("phy: cpcap-usb: Add CPCAP PMIC USB support") Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tony Lindgren authored
commit 4acb0200 upstream. If musb_mailbox() returns an error, we must still continue to finish configuring the phy. Otherwise the phy state may end up only half initialized, and this can cause the debug serial console to stop working. And this will happen if the usb driver musb controller is not loaded. Let's fix the issue by adding helper for cpcap_usb_try_musb_mailbox(). Fixes: 6d6ce40f ("phy: cpcap-usb: Add CPCAP PMIC USB support") Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Alan Stern authored
commit 2548288b upstream. It turns out that even though endpoints with a maxpacket length of 0 aren't useful for data transfer, the descriptors do serve other purposes. In particular, skipping them will also skip over other class-specific descriptors for classes such as UVC. This unexpected side effect has caused some UVC cameras to stop working. In addition, the USB spec requires that when isochronous endpoint descriptors are present in an interface's altsetting 0 (which is true on some devices), the maxpacket size _must_ be set to 0. Warning about such things seems like a bad idea. This patch updates an earlier commit which would log a warning and skip these endpoint descriptors. Now we only log a warning, and we don't even do that for isochronous endpoints in altsetting 0. We don't need to worry about preventing endpoints with maxpacket = 0 from ever being used for data transfers; usb_submit_urb() already checks for this. Reported-and-tested-by:
Roger Whittaker <Roger.Whittaker@suse.com> Fixes: d482c7bb ("USB: Skip endpoints with 0 maxpacket length") Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://marc.info/?l=linux-usb&m=157790377329882&w=2 Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2001061040270.1514-100000@iolanthe.rowland.orgSigned-off-by:
-
Dmitry Torokhov authored
commit 18a1b06e upstream. The open method of hiddev handler fails to bring the device out of autosuspend state as was promised in 0361a28d, as it actually has 2 blocks that try to start the transport (call hid_hw_open()) with both being guarded by the "open" counter, so the 2nd block is never executed as the first block increments the counter so it is never at 0 when we check it for the second block. Additionally hiddev_open() was leaving counter incremented on errors, causing the device to never be reopened properly if there was ever an error. Let's fix all of this by factoring out code that creates client structure and powers up the device into a separate function that is being called from usbhid_open() with the "existancelock" being held. Fixes: 0361a28d ("HID: autosuspend support for USB HID") Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Navid Emamdoost authored
commit b8d17e7d upstream. In ath10k_usb_hif_tx_sg the allocated urb should be released if usb_submit_urb fails. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Navid Emamdoost authored
commit a2cdd074 upstream. In rtl8xxxu_submit_int_urb if usb_submit_urb fails the allocated urb should be released. Signed-off-by:
Chris Chiu <chiu@endlessm.com> Signed-off-by:
-
Navid Emamdoost authored
commit 0e62395d upstream. In bfad_im_get_stats if bfa_port_get_stats fails, allocated memory needs to be released. Link: https://lore.kernel.org/r/20190910234417.22151-1-navid.emamdoost@gmail.comSigned-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Navid Emamdoost authored
commit db8fd2cd upstream. In mwifiex_pcie_alloc_cmdrsp_buf, a new skb is allocated which should be released if mwifiex_map_pci_memory() fails. The release is added. Fixes: fc331460 ("mwifiex: use pci_alloc/free_consistent APIs for PCIe") Signed-off-by:
Ganapathi Bhat <gbhat@marvell.com> Signed-off-by:
-
Ganapathi Bhat authored
commit 3d94a4a8 upstream. mwifiex_process_country_ie() function parse elements of bss descriptor in beacon packet. When processing WLAN_EID_COUNTRY element, there is no upper limit check for country_ie_len before calling memcpy. The destination buffer domain_info->triplet is an array of length MWIFIEX_MAX_TRIPLET_802_11D(83). The remote attacker can build a fake AP with the same ssid as real AP, and send malicous beacon packet with long WLAN_EID_COUNTRY elemen (country_ie_len > 83). Attacker can force STA connect to fake AP on a different channel. When the victim STA connects to fake AP, will trigger the heap buffer overflow. Fix this by checking for length and if found invalid, don not connect to the AP. This fix addresses CVE-2019-14895. Reported-by:
huangwen <huangwenabc@gmail.com> Signed-off-by:
-
Sudip Mukherjee authored
commit 273f6329 upstream. If the serial device is disconnected and reconnected, it re-enumerates properly but does not link it. fwiw, linking means just saving the port index, so allow it always as there is no harm in saving the same value again even if it tries to relink with the same port. Fixes: fb2b9001 ("tty: link tty and port before configuring it as console") Reported-by:
Kenneth R. Crudup <kenny@panix.com> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191227174434.12057-1-sudipm.mukherjee@gmail.comSigned-off-by:
-
Sudip Mukherjee authored
commit fb2b9001 upstream. There seems to be a race condition in tty drivers and I could see on many boot cycles a NULL pointer dereference as tty_init_dev() tries to do 'tty->port->itty = tty' even though tty->port is NULL. 'tty->port' will be set by the driver and if the driver has not yet done it before we open the tty device we can get to this situation. By adding some extra debug prints, I noticed that: 6.650130: uart_add_one_port 6.663849: register_console 6.664846: tty_open 6.674391: tty_init_dev 6.675456: tty_port_link_device uart_add_one_port() registers the console, as soon as it registers, the userspace tries to use it and that leads to tty_open() but uart_add_one_port() has not yet done tty_port_link_device() and so tty->port is not yet configured when control reaches tty_init_dev(). Further look into the code and tty_port_link_device() is done by uart_add_one_port(). After registering the console uart_add_one_port() will call tty_port_register_device_attr_serdev() and tty_port_link_device() is called from this. Call add tty_port_link_device() before uart_configure_port() is done and add a check in tty_port_link_device() so that it only links the port if it has not been done yet. Suggested-by:
Jiri Slaby <jslaby@suse.com> Signed-off-by:
-
Punit Agrawal authored
commit c5ee0b31 upstream. Serdev sub-system claims all ACPI serial devices that are not already initialised. As a result, no device node is created for serial ports on certain boards such as the Apollo Lake based UP2. This has the unintended consequence of not being able to raise the login prompt via serial connection. Introduce a blacklist to reject ACPI serial devices that should not be claimed by serdev sub-system. Add the peripheral ids for Intel HS UART to the blacklist to bring back serial port on SoCs carrying them. Cc: stable@vger.kernel.org Signed-off-by:
Punit Agrawal <punit1.agrawal@toshiba.co.jp> Acked-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Johan Hovold <johan@kernel.org> Cc: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20191219100345.911093-1-punit1.agrawal@toshiba.co.jpSigned-off-by:
-
Michael Straube authored
commit 58dcc5bf upstream. This device was added to the stand-alone driver on github. Add it to the staging driver as well. Link: https://github.com/lwfinger/rtl8188eu/commit/b9b537aa25a8Signed-off-by:
Michael Straube <straube.linux@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191228143725.24455-1-straube.linux@gmail.comSigned-off-by:
-
Ian Abbott authored
commit a9d3a9ce upstream. The Advantech PCI-1713 has 32 analog input channels, but an incorrect bit-mask in the definition of the `PCI171X_MUX_CHANH(x)` and PCI171X_MUX_CHANL(x)` macros is causing channels 16 to 31 to be aliases of channels 0 to 15. Change the bit-mask value from 0xf to 0xff to fix it. Note that the channel numbers will have been range checked already, so the bit-mask isn't really needed. Fixes: 92c65e55 ("staging: comedi: adv_pci1710: define the mux control register bits") Reported-by:
Dmytro Fil <monkdaf@gmail.com> Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20191227170054.32051-1-abbotti@mev.co.ukSigned-off-by:
-
Paul Cercueil authored
commit c80d0f44 upstream. The IRQ handler was passed a pointer to a struct dma_controller, but the argument was then casted to a pointer to a struct musb_dma_controller. Fixes: 427c4f33 ("usb: struct device - replace bus_id with dev_name(), dev_set_name()") Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Tested-by:
Artur Rojek <contact@artur-rojek.eu> Cc: stable@vger.kernel.org Signed-off-by:
Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20191216161844.772-2-b-liu@ti.comSigned-off-by:
-
Paul Cercueil authored
commit 96a0c128 upstream. The pullup may be already enabled before the driver is initialized. This happens for instance on JZ4740. It has to be disabled at init time, as we cannot guarantee that a gadget driver will be bound to the UDC. Signed-off-by:
-
Tony Lindgren authored
commit 5fbf7a25 upstream. When disconnected as USB B-device, suspend interrupt should come before diconnect interrupt, because the DP/DM pins are shorter than the VBUS/GND pins on the USB connectors. But we sometimes get a suspend interrupt after disconnect interrupt. In that case we have devctl set to 99 with VBUS still valid and musb_pm_runtime_check_session() wrongly thinks we have an active session. We have no other interrupts after disconnect coming in this case at least with the omap2430 glue. Let's fix the issue by checking the interrupt status again with delayed work for the devctl 99 case. In the suspend after disconnect case the devctl session bit has cleared by then and musb can idle. For a typical USB B-device connect case we just continue with normal interrupts. Fixes: 467d5c98 ("usb: musb: Implement session bit based runtime PM for musb-core") Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Daniele Palmas authored
commit 2438c3a1 upstream. Telit FN980 flashing device 0x1bc7/0x9010 requires zero packet to be sent if out data size is is equal to the endpoint max size. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> [ johan: switch operands in conditional ] Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Malcolm Priestley authored
commit c0bcf9f3 upstream. intfdata will contain stale pointer when the device is detached after failed initialization when referenced in vt6656_disconnect Provide driver access to it here and NULL it. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/6de448d7-d833-ef2e-dd7b-3ef9992fee0e@gmail.comSigned-off-by:
-
Hans de Goede authored
commit aa23ca3d upstream. On some laptops enabling wakeup on the GPIO interrupts used for ACPI _AEI event handling causes spurious wakeups. This commit adds a new honor_wakeup option, defaulting to true (our current behavior), which can be used to disable wakeup on troublesome hardware to avoid these spurious wakeups. This is a workaround for an architectural problem with s2idle under Linux where we do not have any mechanism to immediately go back to sleep after wakeup events, other then for embedded-controller events using the standard ACPI EC interface, for details see: https://lore.kernel.org/linux-acpi/61450f9b-cbc6-0c09-8b3a-aff6bf9a0b3c@redhat.com/ One series of laptops which is not able to suspend without this workaround is the HP x2 10 Cherry Trail models, this commit adds a DMI based quirk which makes sets honor_wakeup to false on these models. Cc: stable@vger.kernel.org Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Hans de Goede authored
commit 1ad1b540 upstream. Turn the existing run_edge_events_on_boot_blacklist dmi_system_id table into a generic quirk table, storing the quirks in the driver_data ptr. This is a preparation patch for adding other types of (DMI based) quirks. Cc: stable@vger.kernel.org Reviewed-by:
-
Oliver Hartkopp authored
commit e7153bf7 upstream. KMSAN sysbot detected a read access to an untinitialized value in the headroom of an outgoing CAN related sk_buff. When using CAN sockets this area is filled appropriately - but when using a packet socket this initialization is missing. The problematic read access occurs in the CAN receive path which can only be triggered when the sk_buff is sent through a (virtual) CAN interface. So we check in the sending path whether we need to perform the missing initializations. Fixes: d3b58c47 ("can: replace timestamp as unique skb attribute") Reported-by: syzbot+b02ff0707a97e4e79ebb@syzkaller.appspotmail.com Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Tested-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Florian Faber authored
commit 2d77bd61 upstream. Under load, the RX side of the mscan driver can get stuck while TX still works. Restarting the interface locks up the system. This behaviour could be reproduced reliably on a MPC5121e based system. The patch fixes the return value of the NAPI polling function (should be the number of processed packets, not constant 1) and the condition under which IRQs are enabled again after polling is finished. With this patch, no more lockups were observed over a test period of ten days. Fixes: afa17a50 ("net/can: add driver for mscan family & mpc52xx_mscan") Signed-off-by:
Florian Faber <faber@faberman.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 2f361cd9 upstream. Make sure to always use the descriptors of the current alternate setting to avoid future issues when accessing fields that may differ between settings. Signed-off-by:
-
Johan Hovold authored
commit 5660493c upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: aec5fb22 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Cc: stable <stable@vger.kernel.org> # 4.19 Cc: Jimmy Assarsson <extja@kvaser.com> Cc: Christer Beskow <chbe@kvaser.com> Cc: Nicklas Johansson <extnj@kvaser.com> Cc: Martin Henriksson <mh@kvaser.com> Signed-off-by:
-
Wayne Lin authored
commit c4e4fccc upstream. [Why] According to DP spec, it should shift left 4 digits for NO_STOP_BIT in REMOTE_I2C_READ message. Not 5 digits. In current code, NO_STOP_BIT is always set to zero which means I2C master is always generating a I2C stop at the end of each I2C write transaction while handling REMOTE_I2C_READ sideband message. This issue might have the generated I2C signal not meeting the requirement. Take random read in I2C for instance, I2C master should generate a repeat start to start to read data after writing the read address. This issue will cause the I2C master to generate a stop-start rather than a re-start which is not expected in I2C random read. [How] Correct the shifting value of NO_STOP_BIT for DP_REMOTE_I2C_READ case in drm_dp_encode_sideband_req(). Changes since v1:(https://patchwork.kernel.org/patch/11312667/) * Add more descriptions in commit and cc to stable Fixes: ad7f8a1f ("drm/helper: add Displayport multi-stream helper (v0.6)") Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Wayne Lin <Wayne.Lin@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200103055001.10287-1-Wayne.Lin@amd.comSigned-off-by:
-
Geert Uytterhoeven authored
commit f30e2777 upstream. When userspace requests a video mode parameter value that is not supported, frame buffer device drivers should round it up to a supported value, if possible, instead of just rejecting it. This allows applications to quickly scan for supported video modes. Currently this rule is not followed for the number of bits per pixel, causing e.g. "fbset -depth N" to fail, if N is smaller than the current number of bits per pixel. Fix this by returning an error only if bits per pixel is too large, and setting it to the current value otherwise. See also Documentation/fb/framebuffer.rst, Section 2 (Programmer's View of /dev/fb*"). Fixes: 865afb11 ("drm/fb-helper: reject any changes to the fbdev") Cc: stable@vger.kernel.org Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191230132734.4538-1-geert+renesas@glider.beSigned-off-by:
-
Chen-Yu Tsai authored
commit 4396393f upstream. In commit 0b8e7bbd ("drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.") it was assumed that all TCON variants support a minimum divider of 1 if only DCLK was used. However, the oldest generation of hardware only supports minimum divider of 4 if only DCLK is used. If a divider of 1 was used on this old hardware, some scrolling artifact would appear. A divider of 2 seemed OK, but a divider of 3 had artifacts as well. Set the minimum divider when outputing to parallel RGB based on the hardware model, with a minimum of 4 for the oldest (A10/A10s/A13/A20) hardware, and a minimum of 1 for the rest. A value is not set for the TCON variants lacking channel 0. This fixes the scrolling artifacts seen on my A13 tablet. Fixes: 0b8e7bbd ("drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.") Cc: <stable@vger.kernel.org> # 5.4.x Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200107070113.28951-1-wens@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
commit f729a1b0 upstream. Going through all uses of timeval, I noticed that we screwed up input_event in the previous attempts to fix it: The time fields now match between kernel and user space, but all following fields are in the wrong place. Add the required padding that is implied by the glibc timeval definition to fix the layout, and use a struct initializer to avoid leaking kernel stack data. Fixes: 141e5dca ("Input: input_event - fix the CONFIG_SPARC64 mixup") Fixes: 2e746942 ("Input: input_event - provide override for sparc64") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20191213204936.3643476-2-arnd@arndb.de Cc: stable@vger.kernel.org Signed-off-by:
-
Dmitry Torokhov authored
commit cb222aed upstream. If we happen to have a garbage in input device's keycode table with values too big we'll end up doing clear_bit() with offset way outside of our bitmaps, damaging other objects within an input device or even outside of it. Let's add sanity checks to the returned old keycodes. Reported-by: syzbot+c769968809f9359b07aa@syzkaller.appspotmail.com Reported-by: syzbot+76f3a30e88d256644c78@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20191207212757.GA245964@dtor-wsSigned-off-by:
-
Dmitry Torokhov authored
commit 4f388217 upstream. We should not be leaving half-mapped usages with potentially invalid keycodes, as that may confuse hidinput_find_key() when the key is located by index, which may end up feeding way too large keycode into the VT keyboard handler and cause OOB write there: BUG: KASAN: global-out-of-bounds in clear_bit include/asm-generic/bitops-instrumented.h:56 [inline] BUG: KASAN: global-out-of-bounds in kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline] BUG: KASAN: global-out-of-bounds in kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495 Write of size 8 at addr ffffffff89a1b2d8 by task syz-executor108/1722 ... kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline] kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495 input_to_handler+0x3b6/0x4c0 drivers/input/input.c:118 input_pass_values.part.0+0x2e3/0x720 drivers/input/input.c:145 input_pass_values drivers/input/input.c:949 [inline] input_set_keycode+0x290/0x320 drivers/input/input.c:954 evdev_handle_set_keycode_v2+0xc4/0x120 drivers/input/evdev.c:882 evdev_do_ioctl drivers/input/evdev.c:1150 [inline] Cc: stable@vger.kernel.org Reported-by: syzbot+19340dff067c2d3835c0@syzkaller.appspotmail.com Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Marcel Holtmann authored
commit be54e746 upstream. Always return EPOLLOUT from uhid_char_poll to allow polling /dev/uhid for writable state. Fixes: 1f9dec1e ("HID: uhid: allow poll()'ing on uhid devices") Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Alan Stern authored
commit 8ec321e9 upstream. The syzbot fuzzer found a slab-out-of-bounds bug in the HID report handler. The bug was caused by a report descriptor which included a field with size 12 bits and count 4899, for a total size of 7349 bytes. The usbhid driver uses at most a single-page 4-KB buffer for reports. In the test there wasn't any problem about overflowing the buffer, since only one byte was received from the device. Rather, the bug occurred when the HID core tried to extract the data from the report fields, which caused it to try reading data beyond the end of the allocated buffer. This patch fixes the problem by rejecting any report whose total length exceeds the HID_MAX_BUFFER_SIZE limit (minus one byte to allow for a possible report index). In theory a device could have a report longer than that, but if there was such a thing we wouldn't handle it correctly anyway. Reported-and-tested-by: syzbot+09ef48aa58261464b621@syzkaller.appspotmail.com Signed-off-by:
-
Joel Fernandes (Google) authored
commit bf44f488 upstream. Discussion in the below link reported that symbols in modules can appear to be before _stext on ARM architecture, causing wrapping with the offsets of this tracepoint. Change the offset type to s32 to fix this. Link: http://lore.kernel.org/r/20191127154428.191095-1-antonio.borneo@st.com Link: http://lkml.kernel.org/r/20200102194625.226436-1-joel@joelfernandes.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: David Sterba <dsterba@suse.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Antonio Borneo <antonio.borneo@st.com> Cc: stable@vger.kernel.org Fixes: d5915816 ("tracing: Add support for preempt and irq enable/disable events") Signed-off-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit b8299d36 upstream. On some archs with some configurations, MCOUNT_INSN_SIZE is not defined, and this makes the stack tracer fail to compile. Just define it to zero in this case. Link: https://lore.kernel.org/r/202001020219.zvE3vsty%lkp@intel.com Cc: stable@vger.kernel.org Fixes: 4df29712 ("tracing: Remove most or all of stack tracer stack size from stack_max_size") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Kaitao Cheng authored
commit 50f9ad60 upstream. In the function, if register_trace_sched_migrate_task() returns error, sched_switch/sched_wakeup_new/sched_wakeup won't unregister. That is why fail_deprobe_sched_switch was added. Link: http://lkml.kernel.org/r/20191231133530.2794-1-pilgrimtao@gmail.com Cc: stable@vger.kernel.org Fixes: 478142c3 ("tracing: do not grab lock in wakeup latency function tracing") Signed-off-by:
Kaitao Cheng <pilgrimtao@gmail.com> Signed-off-by:
-
Kailang Yang authored
commit 54a6a7dc upstream. Add quirk to ALC285_FIXUP_SPEAKER2_TO_DAC1, which is the same fixup applied for X1 Carbon 7th gen in commit d2cd795c ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen"). Signed-off-by:
Kailang Yang <kailang@realtek.com> Reviewed-by:
Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kailang Yang authored
commit 9194a1eb upstream. Set EAPD control to verb control. Signed-off-by:
-
Kailang Yang authored
commit 6d9ffcff upstream. Add ALCS1200A supported. It was similar as ALC900. Signed-off-by:
-
Takashi Iwai authored
commit 51d4efab upstream. Bose Companion 5 (with USB ID 05a7:1020) doesn't seem supporting reading back the sample rate, so the existing quirk is needed. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206063 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200104110936.14288-1-tiwai@suse.deSigned-off-by:
-
