- 26 Apr, 2017 3 commits
-
-
Chris Wilson authored
If the engine is continually completing nops, we can saturate the signaler and keep it working indefinitely. This angers the NMI watchdog! A good example is to disable semaphores on snb and run igt/gem_exec_nop - the parallel, multi-engine workloads are more than sufficient to hog the CPU, preventing the system from even processing ICMP echo replies. v2: Tvrtko dug into cond_resched() on x86 and found that it only depended upon preempt_count and not tif_need_resched() - which means that we would always call schedule() at that point. Fixes: c81d4613 ("drm/i915: Convert trace-irq to the breadcrumb waiter") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170404120531.10737-1-chris@chris-wilson.co.ukReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> (cherry picked from commit a7980a64) Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Chris Wilson authored
If the signal to park arrives before we sleep, then we need to check kthread_should_park() before sleeping to avoid missing the signal. Otherwise, if the signal arrives whilst we are processing completed requests, we will reset the current->state back to TASK_INTERRUPTIBLE and so miss the wakeup. Fixes: fe3288b5 ("drm/i915: Park the breadcrumbs signaler across a GPU reset") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170403105124.8969-1-chris@chris-wilson.co.ukReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> (cherry picked from commit b1becb88) Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
https://github.com/01org/gvt-linuxJani Nikula authored
Merge tag 'gvt-next-fixes-2017-04-20' of https://github.com/01org/gvt-linux into drm-intel-next-fixes gvt-next-fixes-2017-04-20 - some code optimization from Changbin - debug message cleanup after QoS merge - misc fixes for display mmio init, reset vgpu warning, etc. Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
- 18 Apr, 2017 1 commit
-
-
Dan Carpenter authored
There are two bugs here. The && should be || and the > is off by one so it should be >= ARRAY_SIZE(). Fixes: 8453d674 ("drm/i915/gvt: vGPU execlist virtualization") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
- 13 Apr, 2017 2 commits
-
-
Zhenyu Wang authored
Make sure to take runtime pm when write PTE flush which ensure to write to hw properly. This fixes warning during mdev/vgpu creation which will do ggtt reset. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 9375 at drivers/gpu/drm/i915/intel_drv.h:1748 fwtable_write32+0x1c2/0x1e0 [i915] RPM wakelock ref not held during HW access Call Trace: ? dump_stack+0x5c/0x81 ? __warn+0xbe/0xe0 ? warn_slowpath_fmt+0x5a/0x80 ? wake_up_klogd+0x37/0x40 ? vprintk_emit+0x2ef/0x370 ? fwtable_write32+0x1c2/0x1e0 [i915] ? gtt_set_entry64+0xbb/0xd0 [i915] ? intel_vgpu_reset_ggtt+0x88/0xf0 [i915] ? intel_vgpu_init_gtt+0xa5/0x4f0 [i915] ? intel_gvt_create_vgpu+0x1b5/0x250 [i915] ? kobject_put+0x1b/0x50 ? intel_vgpu_create+0x4e/0x130 [kvmgt] ? mdev_device_create+0x186/0x2a0 [mdev] ? create_store+0xba/0xe0 [mdev] ? create_store+0xba/0xe0 [mdev] ? kernfs_fop_write+0x109/0x1a0 ? kernfs_fop_write+0x109/0x1a0 ? __vfs_write+0x33/0x160 ? __fput+0x161/0x1d0 ? vfs_write+0xb0/0x190 ? SyS_write+0x52/0xc0 ? exit_to_usermode_loop+0x7a/0xa0 ? entry_SYSCALL_64_fastpath+0x1e/0xad v2: remove unrelated oops info v3: change to take runtime pm for ggtt reset instead of get/put for each pte write flush Fixes: d650ac06 ("drm/i915/gvt: reset the GGTT entry when vGPU created") Cc: Ping Gao <ping.a.gao@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
Zhenyu Wang authored
As those debug messages might appear in every timer call for scheduler, it's too noisy, eat too much log and aren't meaningful. So remove them. Cc: Ping Gao <ping.a.gao@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
- 12 Apr, 2017 6 commits
-
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/panel: Changes for v4.12-rc1 This contains two new drivers for a Sitronix and a Samsung panel as well as two new panels supported by the panel-simple driver. * tag 'drm/panel/for-4.12-rc1' of git://anongit.freedesktop.org/tegra/linux: drm/panel: simple: Add support for Winstar WF35LTIACD devicetree: add vendor prefix for Winstar Display Corp. drm/panel: Add driver for sitronix ST7789V LCD controller dt-bindings: display: panel: Add bindings for the Sitronix ST7789V panel drm/panel: Add support for S6E3HA2 panel driver on TM2 board dt-bindings: Add support for Samsung s6e3ha2 panel binding drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel
-
Pei Zhang authored
GVT implements a purely virtual monitor for virtual GPU independent of the host. Some DDI related MMIO are not initialized in current code which cause the display initialization failure in guest. This patch fills the gap. Signed-off-by:
Pei Zhang <pei.zhang@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
Changbin Du authored
Let c compiler handle the structure copying. The compiler will use builtin function to handle that. Signed-off-by:
Changbin Du <changbin.du@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
Changbin Du authored
From perf data, found a significant overhead at ring id check in the function get_opcode. This inline function is frequently used. Since Intel static predictor will predict the branch to fall through so the prediction most fail. This is wasting CPU pipeline resource. We do not need check the engine id everywhere, it should be reliable. Signed-off-by:
Changbin Du <changbin.du@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
Changbin Du authored
The platform check is done outside, no need check again. Platform doesn't include mocs should not invoke this two functions. Signed-off-by:
Changbin Du <changbin.du@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
Changbin Du authored
Make the global mmio list be cacheline aligned to improve performance. Signed-off-by:
Changbin Du <changbin.du@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com>
-
- 10 Apr, 2017 6 commits
-
-
git://people.freedesktop.org/~robclark/linuxDave Airlie authored
Noteworthy changes this time: 1) 4k support for newer chips (ganging up hwpipes and mixers) 2) using OPP bindings for gpu 3) more prep work towards per-process pagetables * 'msm-next' of git://people.freedesktop.org/~robclark/linux: (47 commits) msm/drm: gpu: Dynamically locate the clocks from the device tree drm/msm: gpu: Use OPP tables if we can drm/msm: Hard code the GPU "slow frequency" drm/msm: Add MSM_PARAM_GMEM_BASE drm/msm: Reference count address spaces drm/msm: Make sure to detach the MMU during GPU cleanup drm/msm/mdp5: Enable 3D mux in mdp5_ctl drm/msm/mdp5: Reset CTL blend registers before configuring them drm/msm/mdp5: Assign 'right' mixer to CRTC state drm/msm/mdp5: Stage border out on base stage if CRTC has 2 LMs drm/msm/mdp5: Stage right side hwpipes on Right-side Layer Mixer drm/msm/mdp5: Prepare Layer Mixers for source split drm/msm/mdp5: Configure 'right' hwpipe drm/msm/mdp5: Assign a 'right hwpipe' to plane state drm/msm/mdp5: Create mdp5_hwpipe_mode_set drm/msm/mdp5: Add optional 'right' Layer Mixer in CRTC state drm/msm/mdp5: Add a CAP for Source Split drm/msm/mdp5: Remove mixer/intf pointers from mdp5_ctl drm/msm/mdp5: Start using parameters from CRTC state drm/msm/mdp5: Add more stuff to CRTC state ...
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
Last drm-misc-next pull req for 4.12 Core changes: - fb_helper checkpatch cleanup and simplified _add_one_connector() (Thierry) - drm_ioctl and drm_sysfs improved/gained documentation (Daniel) - [ABI] Repurpose reserved field in drm_event_vblank for crtc_id (Ander) - Plumb acquire ctx through legacy paths to avoid lock_all and legacy_backoff (Daniel) - Add connector_atomic_check to check conn constraints on modeset (Maarten) - Add drm_of_find_panel_or_bridge to remove boilerplate in drivers (Rob) Driver changes: - meson moved to drm-misc (Neil) - Added support for Amlogic GX SoCs in dw-hdmi (Neil) - Rockchip unbind actually cleans up the things bind initializes (Jeffy) - A couple misc fixes in virtio, dw-hdmi NOTE: this also includes a backmerge of drm-next as well rc5 (we needed vmwgfx as well as the new synopsys media formats) * tag 'drm-misc-next-2017-04-07' of git://anongit.freedesktop.org/git/drm-misc: (77 commits) Revert "drm: Don't allow interruptions when opening debugfs/crc" drm: Only take cursor locks when the cursor plane exists drm/vmwgfx: Fix fbdev emulation using legacy functions drm/rockchip: Shutdown all crtcs when unbinding drm drm/rockchip: Reorder drm bind/unbind sequence drm/rockchip: analogix_dp: Disable clock when unbinding drm/rockchip: vop: Unprepare clocks when unbinding drm/rockchip: vop: Enable pm domain before vop_initial drm/rockchip: cdn-dp: Don't unregister audio dev when unbinding drm/rockchip: cdn-dp: Don't try to release firmware when not loaded drm: bridge: analogix: Destroy connector & encoder when unbinding drm: bridge: analogix: Disable clock when unbinding drm: bridge: analogix: Unregister dp aux when unbinding drm: bridge: analogix: Detach panel when unbinding analogix dp drm: Don't allow interruptions when opening debugfs/crc drm/virtio: don't leak bo on drm_gem_object_init failure drm: bridge: dw-hdmi: fix input format/encoding from plat_data drm: omap: use common OF graph helpers drm: convert drivers to use drm_of_find_panel_or_bridge drm: convert drivers to use of_graph_get_remote_node ...
-
Dave Airlie authored
Linux 4.11-rc6 drm-misc needs 4.11-rc5, may as well fix conflicts with rc6.
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Just some bug fixes and vega10 updates for 4.12. * 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: fix fence memory leak in wait_all_fence V2 drm/amdgpu: fix "fix 64bit division" drm/amd/powerplay: add fan controller table v11 support. drm/amd/powerplay: port newest process pptable code for vega10. drm/amdgpu: set vm size and block size by individual gmc by default (v3) drm/amdgpu: Avoid overflows/divide-by-zero in latency_watermark calculations. drm/amdgpu: Make display watermark calculations more accurate drm/radeon: fix typo in bandwidth calculation drm/radeon: Refuse to migrate a prime BO to VRAM. (v2) drm/radeon: Maintain prime import/export refcount for BOs drm/amdgpu: Refuse to pin or change acceptable domains of prime BOs to VRAM. (v2) drm/amdgpu: Fail fb creation from imported dma-bufs. (v2) drm/radeon: Fail fb creation from imported dma-bufs.
-
Dave Airlie authored
Merge tag 'drm-intel-testing-2017-04-03' of git://anongit.freedesktop.org/git/drm-intel into drm-next Last 4.12 feature pile: GVT updates: - Add mdev attribute group for per-vgpu info - Time slice based vGPU scheduling QoS support (Gao Ping) - Initial KBL support for E3 server (Han Xu) - other misc. i915: - lots and lots of small fixes and improvements all over - refactor fw_domain code (Chris Wilson) - improve guc code (Oscar Mateo) - refactor cursor/sprite code, precompute more for less overhead in the critical path (Ville) - refactor guc/huc fw loading code a bit (Michal Wajdeczko) * tag 'drm-intel-testing-2017-04-03' of git://anongit.freedesktop.org/git/drm-intel: (121 commits) drm/i915: Update DRIVER_DATE to 20170403 drm/i915: Clear gt.active_requests before checking idle status drm/i915/uc: Drop use of MISSING_CASE on trivial enums drm/i915: make a few DDI functions static drm/i915: Combine reset_all_global_seqno() loops into one drm/i915: Remove redudant wait for each engine to idle from seqno wrap drm/i915: Wait for all engines to be idle as part of i915_gem_wait_for_idle() drm/i915: Move retire-requests into i915_gem_wait_for_idle() drm/i915/uc: Move fw path check to fetch_uc_fw() drm/i915/huc: Remove unused intel_huc_fini() drm/i915/uc: Add intel_uc_fw_fini() drm/i915/uc: Add intel_uc_fw_type_repr() drm/i915/uc: Move intel_uc_fw_status_repr() to intel_uc.h drivers: gpu: drm: i915L intel_lpe_audio: Fix kerneldoc comments drm/i915: Suppress busy status for engines if wedged drm/i915: Do request retirement before marking engines as wedged drm/i915: Drop verbose and archaic "ring" from our internal engine names drm/i915: Use a dummy timeline name for a signaled fence drm/i915: Ironlake do_idle_maps w/a may be called w/o struct_mutex drm/i915/guc: Take enable_guc_loading check out of GEM core code ...
-
https://github.com/ckhu-mediatek/linux.git-tagsDave Airlie authored
This series is MT2701 DRM support. * 'drm-next-4.12' of https://github.com/ckhu-mediatek/linux.git-tags: drm/mediatek: add support for Mediatek SoC MT2701 drm/mediatek: update DSI sub driver flow for sending commands to panel drm/mediatek: add non-continuous clock mode and EOT packet control drm/mediatek: add dsi transfer function drm/mediatek: add dsi interrupt control drm/mediatek: cleaning up and refine drm/mediatek: update display module connections drm/mediatek: add BLS component drm/mediatek: add shadow register support drm/mediatek: add *driver_data for different hardware settings drm/mediatek: add helpers for coverting from the generic components dt-bindings: display: mediatek: update supported chips
-
- 09 Apr, 2017 6 commits
-
-
Linus Torvalds authored
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French: "This is a set of CIFS/SMB3 fixes for stable. There is another set of four SMB3 reconnect fixes for stable in progress but they are still being reviewed/tested, so didn't want to wait any longer to send these five below" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: Reset TreeId to zero on SMB2 TREE_CONNECT CIFS: Fix build failure with smb2 Introduce cifs_copy_file_range() SMB3: Rename clone_range to copychunk_range Handle mismatched open calls
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "A number of ARM fixes: - prevent oopses caused by dma_get_sgtable() and declared DMA coherent memory - fix boot failure on nommu caused by ID_PFR1 access - a number of kprobes fixes from Jon Medhurst and Masami Hiramatsu" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8665/1: nommu: access ID_PFR1 only if CPUID scheme ARM: dma-mapping: disallow dma_get_sgtable() for non-kernel managed memory arm: kprobes: Align stack to 8-bytes in test code arm: kprobes: Fix the return address of multiple kretprobes arm: kprobes: Skip single-stepping in recursing path if possible arm: kprobes: Allow to handle reentered kprobe on single-stepping
-
Linus Torvalds authored
Merge tag 'driver-core-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are 3 small fixes for 4.11-rc6. One resolves a reported issue with sysfs files that NeilBrown found, one is a documenatation fix for the stable kernel rules, and the last is a small MAINTAINERS file update for kernfs" * tag 'driver-core-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: MAINTAINERS: separate out kernfs maintainership sysfs: be careful of error returns from ops->show() Documentation: stable-kernel-rules: fix stable-tag format
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO driver rfixes from Greg KH: "Here are a number of small IIO and staging driver fixes for 4.11-rc6. Nothing big here, just iio fixes for reported issues, and an ashmem fix for a very old bug that has been reported by a number of Android vendors" * tag 'staging-4.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: android: ashmem: lseek failed due to no FMODE_LSEEK. iio: hid-sensor-attributes: Fix sensor property setting failure. iio: accel: hid-sensor-accel-3d: Fix duplicate scan index error iio: core: Fix IIO_VAL_FRACTIONAL_LOG2 for negative values iio: st_pressure: initialize lps22hb bootime iio: bmg160: reset chip when probing iio: cros_ec_sensors: Fix return value to get raw and calibbias data.
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull VFS fixes from Al Viro: "statx followup fixes and a fix for stack-smashing on alpha" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: alpha: fix stack smashing in old_adjtimex(2) statx: Include a mask for stx_attributes in struct statx statx: Reserve the top bit of the mask for future struct expansion xfs: report crtime and attribute flags to statx ext4: Add statx support statx: optimize copy of struct statx to userspace statx: remove incorrect part of vfs_statx() comment statx: reject unknown flags when using NULL path Documentation/filesystems: fix documentation for ->getattr()
-
- 08 Apr, 2017 16 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Here's a pull request for 4.11-rc, fixing a set of issues mostly centered around the new scheduling framework. These have been brewing for a while, but split up into what we absolutely need in 4.11, and what we can defer until 4.12. These are well tested, on both single queue and multiqueue setups, and with and without shared tags. They fix several hangs that have happened in testing. This is obviously larger than I would have preferred at this point in time, but I don't think we can shave much off this and still get the desired results. In detail, this pull request contains: - a set of five fixes for NVMe, mostly from Christoph and one from Roland. - a series from Bart, fixing issues with dm-mq and SCSI shared tags and scheduling. Note that one of those patches commit messages may read like an optimization, but it is in fact an important fix for queue restarts in particular. - a series from Omar, most importantly fixing a hang with multiple hardware queues when we fail to get a driver tag. Another important fix in there is for resizing hardware queues, which nbd does when handling multiple sockets for one connection. - fixing an imbalance in putting the ctx for hctx request allocations from Minchan" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: Restart a single queue if tag sets are shared dm rq: Avoid that request processing stalls sporadically scsi: Avoid that SCSI queues get stuck blk-mq: Introduce blk_mq_delay_run_hw_queue() blk-mq: remap queues when adding/removing hardware queues blk-mq-sched: fix crash in switch error path blk-mq-sched: set up scheduler tags when bringing up new queues blk-mq-sched: refactor scheduler initialization blk-mq: use the right hctx when getting a driver tag fails nvmet: fix byte swap in nvmet_parse_io_cmd nvmet: fix byte swap in nvmet_execute_write_zeroes nvmet: add missing byte swap in nvmet_get_smart_log nvme: add missing byte swap in nvme_setup_discard nvme: Correct NVMF enum values to match NVMe-oF rev 1.0 block: do not put mq context in blk_mq_alloc_request_hctx
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fix from Linus Walleij: "This late fix for pin control is hopefully the last I send this cycle. The problem was detected early in the v4.11 release cycle and there has been some back and forth on how to solve it. Sadly the proper fix arrives late, but at least not too late. An issue was detected with pin control on the Freescale i.MX after the refactorings for more general group and function handling. We now have the proper fix for this" * tag 'pinctrl-v4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 4.11: Headed to stable: - disable HFSCR[TM] if TM is not supported, fixes a potential host kernel crash triggered by a hostile guest, but only in configurations that no one uses - don't try to fix up misaligned load-with-reservation instructions - fix flush_(d|i)cache_range() called from modules on little endian kernels - add missing global TLB invalidate if cxl is active - fix missing preempt_disable() in crc32c-vpmsum And a fix for selftests build changes that went in this release: - selftests/powerpc: Fix standalone powerpc build Thanks to: Benjamin Herrenschmidt, Frederic Barrat, Oliver O'Halloran, Paul Mackerras" * tag 'powerpc-4.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/crypto/crc32c-vpmsum: Fix missing preempt_disable() powerpc/mm: Add missing global TLB invalidate if cxl is active powerpc/64: Fix flush_(d|i)cache_range() called from modules powerpc: Don't try to fix up misaligned load-with-reservation instructions powerpc: Disable HFSCR[TM] if TM is not supported selftests/powerpc: Fix standalone powerpc build
-
Chris Salls authored
In the case that compat_get_bitmap fails we do not want to copy the bitmap to the user as it will contain uninitialized stack data and leak sensitive data. Signed-off-by:
Chris Salls <salls@cs.ucsb.edu> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Liping Zhang authored
Currently, inputting the following command will succeed but actually the value will be truncated: # echo 0x12ffffffff > /proc/sys/net/ipv4/tcp_notsent_lowat This is not friendly to the user, so instead, we should report error when the value is larger than UINT_MAX. Fixes: e7d316a0 ("sysctl: handle error writing UINT_MAX to u32 fields") Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Tejun Heo authored
Separate out kernfs from driver core and add myself as a co-maintainer. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
NeilBrown authored
ops->show() can return a negative error code. Commit 65da3484 ("sysfs: correctly handle short reads on PREALLOC attrs.") (in v4.4) caused this to be stored in an unsigned 'size_t' variable, so errors would look like large numbers. As a result, if an error is returned, sysfs_kf_read() will return the value of 'count', typically 4096. Commit 17d0774f ("sysfs: correctly handle read offset on PREALLOC attrs") (in v4.8) extended this error to use the unsigned large 'len' as a size for memmove(). Consequently, if ->show returns an error, then the first read() on the sysfs file will return 4096 and could return uninitialized memory to user-space. If the application performs a subsequent read, this will trigger a memmove() with extremely large count, and is likely to crash the machine is bizarre ways. This bug can currently only be triggered by reading from an md sysfs attribute declared with __ATTR_PREALLOC() during the brief period between when mddev_put() deletes an mddev from the ->all_mddevs list, and when mddev_delayed_delete() - which is scheduled on a workqueue - completes. Before this, an error won't be returned by the ->show() After this, the ->show() won't be called. I can reproduce it reliably only by putting delay like usleep_range(500000,700000); early in mddev_delayed_delete(). Then after creating an md device md0 run echo clear > /sys/block/md0/md/array_state; cat /sys/block/md0/md/array_state The bug can be triggered without the usleep. Fixes: 65da3484 ("sysfs: correctly handle short reads on PREALLOC attrs.") Fixes: 17d0774f ("sysfs: correctly handle read offset on PREALLOC attrs") Cc: stable@vger.kernel.org Signed-off-by:
NeilBrown <neilb@suse.com> Acked-by:
Tejun Heo <tj@kernel.org> Reported-and-tested-by:
Miroslav Benes <mbenes@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
A patch documenting how to specify which kernels a particular fix should be backported to (seemingly) inadvertently added a minus sign after the kernel version. This particular stable-tag format had never been used prior to this patch, and was neither present when the patch in question was first submitted (it was added in v2 without any comment). Drop the minus sign to avoid any confusion. Fixes: fdc81b79 ("stable_kernel_rules: Add clause about specification of kernel versions to patch.") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jordan Crouse authored
Instead of using a fixed list of clock names use the clock-names list in the device tree to discover and get the list of clocks that we need. Signed-off-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Jordan Crouse authored
If a OPP table is defined for the GPU device in the device tree use that in lieu of the downstream style GPU frequency table. If we do use the downstream table convert it to a OPP table so that we can take advantage of the OPP lookup facilities later. Signed-off-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Jordan Crouse authored
Some A3XX and A4XX GPU targets required that the GPU clock be programmed to a non zero value when it was disabled so 27Mhz was chosen as the "invalid" frequency. Even though newer targets do not have the same clock restrictions we still write 27Mhz on clock disable and expect the clock subsystem to round down to zero. For unknown reasons even though the slow clock speed is always 27Mhz and it isn't actually a functional level the legacy device tree frequency tables always defined it and then did gymnastics to work around it. Instead of playing the same silly games just hard code the "slow" clock speed in the code as 27MHz and save ourselves a bit of infrastructure. Signed-off-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Jordan Crouse authored
User space needs to know where the GMEM whole starts so that they can set up the addressing correctly. Signed-off-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Jordan Crouse authored
There are reasons for a memory object to outlive the file descriptor that created it and so the address space that a buffer object is attached to must also outlive the file descriptor. Reference count the address space so that it can remain viable until all the objects have released their addresses. Signed-off-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Jordan Crouse authored
We should be detaching the MMU before destroying the address space. To do this cleanly, the detach has to happen in adreno_gpu_cleanup() because it needs access to structs in adreno_gpu.c. Plus it is better symmetry to have the attach and detach at the same code level. Signed-off-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
3D mux is a small block placed after the DSPPs in MDP5. It can merge 2 LM/DSPP outputs and feed it to a single interface. Enable 3D Mux if our mdp5_pipeline has 2 active LMs. This check will need to be made more specific later when we add Dual DSI support with source split enabled. In that use case, each LM feeds to a separae INTF, so the 3D mux isn't needed. Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
Assigning LMs dynamically to CRTCs results in REG_MDP5_CTL_LAYER_REGs and REG_MDP5_CTL_LAYER_EXT_REGs maintaining old values for a LM that isn't used by our CTL instance anymore. Clear the ctl's CTL_LAYER_REG and CTL_LAYER_EXT_REGs for all LM instances. The ones that need to be configured are configured later in this func. Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-