- 20 Sep, 2021 4 commits
-
-
Ansuel Smith authored
Fix spacing and improve name for 83xx phy following other phy in the same driver. Signed-off-by:
Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ansuel Smith authored
Add resume/suspend function to qca83xx internal phy. We can't use the at803x generic function as the documentation lacks of any support for WoL regs. Signed-off-by:
-
Ansuel Smith authored
For qca8327 internal phy there are 2 different switch variant with 2 different phy id. Add this missing variant so the internal phy can be correctly identified and fixed. Signed-off-by:
-
Tony Lu authored
This implements ndo_tx_timeout handler and put this into stats. When there is something wrong to send out packets, we could notice tx timeout events and total timeout counter. We have suffered send timeout issues due to the backends hung. With this, we can find the details, and collect the counters by monitor systems. Signed-off-by:
Tony Lu <tony.ly@linux.alibaba.com> Signed-off-by:
-
- 19 Sep, 2021 8 commits
-
-
Hariprasad Kelam authored
As per HW errata AQ modification to CQ could be discarded on heavy traffic. This patch implements workaround for the same after each CQ write by AQ check whether the requested fields (except those which HW can update eg: avg_level) are properly updated or not. If CQ context is not updated then perform AQ write again. Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Signed-off-by:
-
Jakub Kicinski authored
The code for handling active queue changes is identical between mq and mqprio, reuse it. Suggested-by:
Cong Wang <cong.wang@bytedance.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Russell King (Oracle) authored
Dan Carpenter points out that we have a code path that permits a NULL netdev pointer to be passed to netif_carrier_off(), which will cause a kernel oops. In any case, we need to set pl->old_link_state to false to have the desired effect when there is no netdev present. Fixes: f9749365 ("net: phylink: add suspend/resume support") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Yajun Deng authored
It no need barrier when assigning a NULL value to an RCU protected pointer. So use RCU_INIT_POINTER() instead for more fast. Signed-off-by:
Yajun Deng <yajun.deng@linux.dev> Signed-off-by:
-
Xuan Zhuo authored
This warning is output when virtnet does not have enough queues, but it only needs to be printed once to inform the user of this situation. It is not necessary to print it every time. If the user loads xdp frequently, this log appears too much. Signed-off-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by:
-
wangzhitong authored
this patch fixes below Errors reported by checkpatch ERROR: do not initialise globals to 0 +int cipso_v4_rbm_optfmt = 0; Signed-off-by:wangzhitong <wangzhitong@uniontech.com> Signed-off-by:
-
Yajun Deng authored
The key_domain member in struct net only exists if we define CONFIG_KEYS. So we should add the define when we used key_domain. Fixes: 9b242610 ("keys: Network namespace domain tag") Signed-off-by:
-
Russell King authored
Phylink documentation says: Note that the PHY may be able to transform from one connection technology to another, so, eg, don't clear 1000BaseX just because the MAC is unable to BaseX mode. This is more about clearing unsupported speeds and duplex settings. The port modes should not be cleared; phylink_set_port_modes() will help with this. So add the missing 10G modes. Signed-off-by:
Marek Behún <kabel@kernel.org> Acked-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
- 18 Sep, 2021 13 commits
-
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Add SOL_MPTCP getsockopt support Here's the first new MPTCP feature for the v5.16 cycle, and I'll defer to Florian's helpful description of the series implementing some new MPTCP socket options: ======== This adds the MPTCP_INFO, MPTCP_TCPINFO and MPTCP_SUBFLOW_ADDRS mptcp getsockopt optnames. MPTCP_INFO exposes the mptcp_info struct as an alternative to the existing netlink diag interface. MPTCP_TCPINFO exposes the tcp_info struct. Unlike SOL_TCP/TCP_INFO, this returns one struct for each active subflow. MPTCP_SUBFLOW_ADDRS allows userspace to discover the ip addresses/ports used by the local and remote endpoints, one for each active tcp subflow. MPTCP_TCPINFO and MPTCP_SUBFLOW_ADDRS share the same meta-header that needs to be pre-filled by userspace with the size of the data structures it expects. This is done to allow extension of the involved structs later on, without breaking backwards compatibility. The meta-structure can also be used to discover the required space to obtain all information, as kernel will fill in the number of active subflows even if there is not enough room for the requested info itself. More information is available in the individual patches. Last patch adds test cases for the three optnames. ======== ==================== Signed-off-by: -
Florian Westphal authored
Add a test program that retrieves the three info types: 1. mptcp meta information 2. tcp info for subflow 3. subflow endpoint addresses For all three rudimentary checks are added. 1. Meta information checks that the logical mptcp sequence numbers advance as expected, based on the bytes read (init seq + bytes_received/sent) and the connection state (after close, we should exect 1 extra byte due to FIN). 2. TCP info checks the number of bytes sent/received vs. sums of read/write syscall return values. 3. Subflow endpoint addresses are checked vs. getsockname/getpeername result. Tests for forward compatibility (0-initialisation of output-only fields in mptcp_subflow_data structure) are added as well. Co-developed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Florian Westphal authored
This retrieves the address pairs of all subflows currently active for a given mptcp connection. It re-uses the same meta-header as for MPTCP_TCPINFO. A new structure is provided to hold the subflow address data: struct mptcp_subflow_addrs { union { __kernel_sa_family_t sa_family; struct sockaddr sa_local; struct sockaddr_in sin_local; struct sockaddr_in6 sin6_local; struct sockaddr_storage ss_local; }; union { struct sockaddr sa_remote; struct sockaddr_in sin_remote; struct sockaddr_in6 sin6_remote; struct sockaddr_storage ss_remote; }; }; Usage of the new getsockopt is very similar to MPTCP_TCPINFO one. Userspace allocates a 'struct mptcp_subflow_data', followed by one or more 'struct mptcp_subflow_addrs', then inits the mptcp_subflow_data structure as follows: struct mptcp_subflow_addrs *sf_addr; struct mptcp_subflow_data *addr; socklen_t olen = sizeof(*addr) + (8 * sizeof(*sf_addr)); addr = malloc(olen); addr->size_subflow_data = sizeof(*addr); addr->num_subflows = 0; addr->size_kernel = 0; addr->size_user = sizeof(struct mptcp_subflow_addrs); sf_addr = (struct mptcp_subflow_addrs *)(addr + 1); and then retrieves the endpoint addresses via: ret = getsockopt(fd, SOL_MPTCP, MPTCP_SUBFLOW_ADDRS, addr, &olen); If the call succeeds, kernel will have added up to 8 endpoint addresses after the 'mptcp_subflow_data' header. Userspace needs to re-check 'olen' value to detect how many bytes have been filled in by the kernel. Userspace can check addr->num_subflows to discover when there were more subflows that available data space. Co-developed-by: -
Florian Westphal authored
Allow users to retrieve TCP_INFO data of all subflows. Users need to pre-initialize a meta header that has to be prepended to the data buffer that will be filled with the tcp info data. The meta header looks like this: struct mptcp_subflow_data { __u32 size_subflow_data;/* size of this structure in userspace */ __u32 num_subflows; /* must be 0, set by kernel */ __u32 size_kernel; /* must be 0, set by kernel */ __u32 size_user; /* size of one element in data[] */ } __attribute__((aligned(8))); size_subflow_data has to be set to 'sizeof(struct mptcp_subflow_data)'. This allows to extend mptcp_subflow_data structure later on without breaking backwards compatibility. If the structure is extended later on, kernel knows where the userspace-provided meta header ends, even if userspace uses an older (smaller) version of the structure. num_subflows must be set to 0. If the getsockopt request succeeds (return value is 0), it will be updated to contain the number of active subflows for the given logical connection. size_kernel must be set to 0. If the getsockopt request is successful, it will contain the size of the 'struct tcp_info' as known by the kernel. This is informational only. size_user must be set to 'sizeof(struct tcp_info)'. This allows the kernel to only fill in the space reserved/expected by userspace. Example: struct my_tcp_info { struct mptcp_subflow_data d; struct tcp_info ti[2]; }; struct my_tcp_info ti; socklen_t olen; memset(&ti, 0, sizeof(ti)); ti.d.size_subflow_data = sizeof(struct mptcp_subflow_data); ti.d.size_user = sizeof(struct tcp_info); olen = sizeof(ti); ret = getsockopt(fd, SOL_MPTCP, MPTCP_TCPINFO, &ti, &olen); if (ret < 0) die_perror("getsockopt MPTCP_TCPINFO"); mptcp_subflow_data.num_subflows is populated with the number of subflows that exist on the kernel side for the logical mptcp connection. This allows userspace to re-try with a larger tcp_info array if the number of subflows was larger than the available space in the ti[] array. olen has to be set to the number of bytes that userspace has allocated to receive the kernel data. It will be updated to contain the real number bytes that have been copied to by the kernel. In the above example, if the number if subflows was 1, olen is equal to 'sizeof(struct mptcp_subflow_data) + sizeof(struct tcp_info). For 2 or more subflows olen is equal to 'sizeof(struct my_tcp_info)'. If there was more data that could not be copied due to lack of space in the option buffer, userspace can detect this by checking mptcp_subflow_data->num_subflows. Signed-off-by: -
Florian Westphal authored
Its not compatible with multipath-tcp.org kernel one. 1. The out-of-tree implementation defines a different 'struct mptcp_info', with embedded __user addresses for additional data such as endpoint addresses. 2. Mat Martineau points out that embedded __user addresses doesn't work with BPF_CGROUP_RUN_PROG_GETSOCKOPT() which assumes that copying in optsize bytes from optval provides all data that got copied to userspace. This provides mptcp_info data for the given mptcp socket. Userspace sets optlen to the size of the structure it expects. The kernel updates it to contain the number of bytes that it copied. This allows to append more information to the structure later. Signed-off-by:
-
Florian Westphal authored
Will be re-used from getsockopt path. Since diag can be a module, we can't export the helper from diag, it needs to be moved to core. Signed-off-by:
-
David S. Miller authored
Claudiu Beznea says: ==================== net: macb: add support for MII on RGMII interface This series adds support for MII mode on RGMII interface (patches 3/4, 4/4). Along with this the series also contains minor cleanups (patches 1/3, 2/3) on macb.h. Changes in v2: - added patch 4/4 to enable MII on RGMII support for SAMA7G5 MAC IPs ==================== Signed-off-by: -
Claudiu Beznea authored
Both MAC IPs available on SAMA7G5 support MII on RGMII feature. Enable these by adding proper capability to proper macb_config objects. Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by:
-
Claudiu Beznea authored
Cadence IP has option to enable MII support on RGMII interface. This could be selected though bit 28 of network control register. This option is not enabled on all the IP versions thus add a software capability to be selected by the proper implementation of this IP. Signed-off-by:
-
Claudiu Beznea authored
Align for OSSMODE offset. Signed-off-by:
-
Claudiu Beznea authored
Add description for SRTSM bit. Signed-off-by:
-
Florian Fainelli authored
When we are using a dedicated PHY driver (not the Generic PHY driver) chances are that it is going to configure RGMII delays and do that in a way that is incompatible with our incorrect interpretation of the phy_interface value. Add a quirk in order to reverse the PHY_INTERFACE_MODE_RGMII to the value of PHY_INTERFACE_MODE_RGMII_ID such that the MAC continues to be configured the way it used to be, but the PHY driver can account for adding delays. Conversely when PHY_INTERFACE_MODE_RGMII_TXID is specified, return PHY_INTERFACE_MODE_RGMII_RXID to the PHY since we will have enabled a TXC MAC delay (id_mode_dis=0, meaning there is a delay inserted). This is not considered a bug fix at this point since it only affects Broadcom STB platforms shipping with a Device Tree blob that is not updatable in the field (quite a few devices out there) and which was generated using the scripted Device Tree environment shipped with those platforms' SDK. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
Sky2 is parsing the VPD and adds the parsed information to its debugfs file. This isn't needed in kernel, userspace tools like lspci can be used to display such information nicely. Therefore remove this from the driver. lspci -vv: Capabilities: [50] Vital Product Data Product Name: Marvell Yukon 88E8070 Gigabit Ethernet Controller Read-only fields: [PN] Part number: Yukon 88E8070 [EC] Engineering changes: Rev. 1.0 [MN] Manufacture ID: Marvell [SN] Serial number: AbCdEfG970FD4 [CP] Extended capability: 01 10 cc 03 [RV] Reserved: checksum good, 9 byte(s) reserved Read/write fields: [RW] Read-write area: 1 byte(s) free End Relevant part in debugfs file: 0000:01:00.0 Product Data Marvell Yukon 88E8070 Gigabit Ethernet Controller Part Number: Yukon 88E8070 Engineering Level: Rev. 1.0 Manufacturer: Marvell Serial Number: AbCdEfG970FD4 Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Acked-by:
Stephen Hemminger <stephen@networkplumber.org> Link: https://lore.kernel.org/r/bbaee8ab-9b2e-de04-ee7b-571e094cc5fe@gmail.comSigned-off-by:
-
- 17 Sep, 2021 15 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-09-17 We've added 63 non-merge commits during the last 12 day(s) which contain a total of 65 files changed, 2653 insertions(+), 751 deletions(-). The main changes are: 1) Streamline internal BPF program sections handling and bpf_program__set_attach_target() in libbpf, from Andrii. 2) Add support for new btf kind BTF_KIND_TAG, from Yonghong. 3) Introduce bpf_get_branch_snapshot() to capture LBR, from Song. 4) IMUL optimization for x86-64 JIT, from Jie. 5) xsk selftest improvements, from Magnus. 6) Introduce legacy kprobe events support in libbpf, from Rafael. 7) Access hw timestamp through BPF's __sk_buff, from Vadim. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (63 commits) selftests/bpf: Fix a few compiler warnings libbpf: Constify all high-level program attach APIs libbpf: Schedule open_opts.attach_prog_fd deprecation since v0.7 selftests/bpf: Switch fexit_bpf2bpf selftest to set_attach_target() API libbpf: Allow skipping attach_func_name in bpf_program__set_attach_target() libbpf: Deprecated bpf_object_open_opts.relaxed_core_relocs selftests/bpf: Stop using relaxed_core_relocs which has no effect libbpf: Use pre-setup sec_def in libbpf_find_attach_btf_id() bpf: Update bpf_get_smp_processor_id() documentation libbpf: Add sphinx code documentation comments selftests/bpf: Skip btf_tag test if btf_tag attribute not supported docs/bpf: Add documentation for BTF_KIND_TAG selftests/bpf: Add a test with a bpf program with btf_tag attributes selftests/bpf: Test BTF_KIND_TAG for deduplication selftests/bpf: Add BTF_KIND_TAG unit tests selftests/bpf: Change NAME_NTH/IS_NAME_NTH for BTF_KIND_TAG format selftests/bpf: Test libbpf API function btf__add_tag() bpftool: Add support for BTF_KIND_TAG libbpf: Add support for BTF_KIND_TAG libbpf: Rename btf_{hash,equal}_int to btf_{hash,equal}_int_tag ... ==================== Link: https://lore.kernel.org/r/20210917173738.3397064-1-ast@kernel.orgSigned-off-by:
-
Florian Fainelli authored
72165 is a 16nm process SoC with a 10/100 integrated Ethernet PHY, create a new macro and set of functions for this different process type. Signed-off-by:
-
Nathan Chancellor authored
Clang warns twice: drivers/ptp/ptp_ocp.c:2065:16: error: operator '?:' has lower precedence than '&'; '&' will be evaluated first [-Werror,-Wbitwise-conditional-parentheses] on & map ? " ON" : "OFF", src); ~~~~~~~~ ^ drivers/ptp/ptp_ocp.c:2065:16: note: place parentheses around the '&' expression to silence this warning on & map ? " ON" : "OFF", src); ^ ( ) drivers/ptp/ptp_ocp.c:2065:16: note: place parentheses around the '?:' expression to evaluate it first on & map ? " ON" : "OFF", src); ^ on and map are both booleans so this should be a logical AND, which clears up the operator precedence issue. Fixes: a62a56d0 ("ptp: ocp: Enable 4th timestamper / PPS generator") Link: https://github.com/ClangBuiltLinux/linux/issues/1457Suggested-by:Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Acked-by:
-
Yonghong Song authored
With clang building selftests/bpf, I hit a few warnings like below: .../bpf_iter.c:592:48: warning: variable 'expected_key_c' set but not used [-Wunused-but-set-variable] __u32 expected_key_a = 0, expected_key_b = 0, expected_key_c = 0; ^ .../bpf_iter.c:688:48: warning: variable 'expected_key_c' set but not used [-Wunused-but-set-variable] __u32 expected_key_a = 0, expected_key_b = 0, expected_key_c = 0; ^ .../tc_redirect.c:657:6: warning: variable 'target_fd' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (!ASSERT_OK_PTR(nstoken, "setns " NS_FWD)) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .../tc_redirect.c:743:6: note: uninitialized use occurs here if (target_fd >= 0) ^~~~~~~~~ Removing unused variables and initializing the previously-uninitialized variable to ensure these warnings are gone. Signed-off-by:Yonghong Song <yhs@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210917043343.3711917-1-yhs@fb.com
-
Alexei Starovoitov authored
Andrii Nakryiko says: ==================== This patch set deprecates bpf_object_open_opts.attach_prog_fd (in libbpf 0.7+) by extending bpf_program__set_attach_target() to support some more flexible scenarios. Existing fexit_bpf2bpf selftest is updated accordingly to not use deprecated APIs. While at it, also deprecate no-op relaxed_core_relocs option (they are always "relaxed"). Last patch also const-ifies all high-level libbpf attach APIs, as there is no reason for them to assume bpf_program/bpf_map modifications. Patch #1 also removes one more unneeded use of find_sec_def(), relying on prog->sec_def that's set during bpf_object__open() operation, simplifying upcoming refactoring a little bit more. All these changes are preparatory patches before SEC() handling refactoring that will come next. ==================== Signed-off-by: -
Andrii Nakryiko authored
Attach APIs shouldn't need to modify bpf_program/bpf_map structs, so change all struct bpf_program and struct bpf_map pointers to const pointers. This is completely backwards compatible with no functional change. Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Signed-off-by:
-
Andrii Nakryiko authored
bpf_object_open_opts.attach_prog_fd makes a pretty strong assumption that bpf_object contains either only single freplace BPF program or all of BPF programs in BPF object are freplaces intended to replace different subprograms of the same target BPF program. This seems both a bit confusing, too assuming, and limiting. We've had bpf_program__set_attach_target() API which allows more fine-grained control over this, on a per-program level. As such, mark open_opts.attach_prog_fd as deprecated starting from v0.7, so that we have one more universal way of setting freplace targets. With previous change to allow NULL attach_func_name argument, and especially combined with BPF skeleton, arguable bpf_program__set_attach_target() is a more convenient and explicit API as well. Signed-off-by:
-
Andrii Nakryiko authored
Switch fexit_bpf2bpf selftest to bpf_program__set_attach_target() instead of using bpf_object_open_opts.attach_prog_fd, which is going to be deprecated. These changes also demonstrate the new mode of set_attach_target() in which it allows NULL when the target is BPF program (attach_prog_fd != 0). Signed-off-by:
-
Andrii Nakryiko authored
Allow to use bpf_program__set_attach_target to only set target attach program FD, while letting libbpf to use target attach function name from SEC() definition. This might be useful for some scenarios where bpf_object contains multiple related freplace BPF programs intended to replace different sub-programs in target BPF program. In such case all programs will have the same attach_prog_fd, but different attach_func_name. It's convenient to specify such target function names declaratively in SEC() definitions, but attach_prog_fd is a dynamic runtime setting. To simplify such scenario, allow bpf_program__set_attach_target() to delay BTF ID resolution till the BPF program load time by providing NULL attach_func_name. In that case the behavior will be similar to using bpf_object_open_opts.attach_prog_fd (which is marked deprecated since v0.7), but has the benefit of allowing more control by user in what is attached to what. Such setup allows having BPF programs attached to different target attach_prog_fd with target functions still declaratively recorded in BPF source code in SEC() definitions. Selftests changes in the next patch should make this more obvious. Signed-off-by:
-
Andrii Nakryiko authored
It's relevant and hasn't been doing anything for a long while now. Deprecated it. Signed-off-by:
-
Andrii Nakryiko authored
relaxed_core_relocs option hasn't had any effect for a while now, stop specifying it. Next patch marks it as deprecated. Signed-off-by:
-
Andrii Nakryiko authored
Don't perform another search for sec_def inside libbpf_find_attach_btf_id(), as each recognized bpf_program already has prog->sec_def set. Also remove unnecessary NULL check for prog->sec_name, as it can never be NULL. Signed-off-by:
-
Krzysztof Kozlowski authored
The MODULE_DEVICE_TABLE already creates proper alias for spi driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
-
Leon Romanovsky authored
Devlink core exported generously the functions calls that were used by netdevsim tests or not used at all. Delete such APIs with one exception - devlink_alloc_ns(). That function should be spared from deleting because it is a special form of devlink_alloc() needed for the netdevsim. Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Acked-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
Cai Huoqing authored
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. And using dev_err_probe() can reduce code size, and the error value gets printed. Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Acked-by:
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by:
-
