This module is used by the Qualcomm sa8775p platform for passing the
reboot reason to the bootloader. Enable building it in the arm64
defconfig as a module.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable ADC driver to be built as a module which will
add support for ADC in TI K3 specific SoCs.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable TSCADC driver to be built as a module which will
add support for TI's TSC/ADC MFDevice.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable TI's SA2UL driver to support security acceleration on TI K3 SoCs.
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable crypto test module, used for testing crypto engine performance.
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-6.4-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/defconfig

arm64: tegra: Default configuration changes for v6.4-rc1

Contains a single patch to enable the Coresight System PMU driver.

* tag 'tegra-for-6.4-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: defconfig: Enable ARM CoreSight PMU driver

Link: https://lore.kernel.org/r/20230406124804.970394-7-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-defconfig-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig

i.MX defconfig updates for 6.4:

- Enable i.MX93 ADC driver in arm64 defconfig.
- Enable BD71815 PMIC and TDA998X HDMI bridge driver in
  imx_v6_v7_defconfig.
- Enable a few drivers support needed by Tarragon boards in
  imx_v6_v7_defconfig.
- Build IMX_SDMA driver as module in imx_v4_v5_defconfig.

* tag 'imx-defconfig-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx_v4_v5_defconfig: Build CONFIG_IMX_SDMA as module
  ARM: imx_v6_v7_defconfig: Enable Tarragon peripheral drivers
  ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_I2C_NXP_TDA998X
  arm64: defconfig: Enable i.MX93 ADC support
  ARM: imx_v6_v7_defconfig: Enable rohm,bd71815

Link: https://lore.kernel.org/r/20230408101928.280271-6-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ti-k3-config-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/defconfig

arm64: TI K3 defconfig updates for v6.4

* Enable drivers for BeaglePlay and Audio drivers for AM62-SK

For this tag, Bloat-o-meter reports (17.0.0 + v6.3-rc1 base):
add/remove: 61/2 grow/shrink: 3/1 up/down: 17852/-208 (17644)
[...]
Total: Before=27746954, After=27764598, chg +0.06%

* tag 'ti-k3-config-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
  arm64: defconfig: Enable audio drivers for AM62-SK
  arm64: defconfig: Enable drivers for BeaglePlay

Link: https://lore.kernel.org/r/20230410140517.ovxnagc4xh3gqath@canarySigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-defconfig-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig

Qualcomm ARM64 defconfig updates for v6.4

This enables a range of TLMM pinctrl drivers, needed to boot related
platforms. Multimedia clock drivers for MSM8994 and MSM8998 are enabled
and the MSM8996 is flagged as a module instead of builtin.

The PMIC_GLINK drivers are enabled, providing USB Type-C and battery
support on various platforms, and eUSB2 drivers found on SM8550 are
enabled.

Base drivers for IPQ5332 and IPQ9574 are enabled.

* tag 'qcom-arm64-defconfig-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: defconfig: Enable IPQ9574 SoC base configs
  arm64: defconfig: remove duplicate TYPEC_UCSI & QCOM_PMIC_GLINK
  arm64: defconfig: add PMIC GLINK modules
  arm64: defconfig: enable Qualcomm pin controller drivers
  arm64: defconfig: Enable qcom msm899{4,8} clk drivers
  arm64: defconfig: Switch msm8996 clk drivers to module
  arm64: defconfig: Enable QCOM eUSB2 SNPS PHY and repeater
  arm64: defconfig: Enable IPQ5332 SoC base configs

Link: https://lore.kernel.org/r/20230410155955.5329-1-andersson@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

STM32MP13 platform relies on OPTEE to boot: Clocks and regulators are
handled in the secure world by OPTEE and exported to the non secure world
(LINUX) thanks to ARM SCMI protocol.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20230413072042.30657-1-alexandre.torgue@foss.st.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Update the U8500 defconfig accordingly:

- Add the NFC modules used by some U8500-based systems.

- Switch out the now deleted UX500 crypto drivers to the
  STM32 drivers that we have augmented to work with
  UX500.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230405105439.1739575-1-linus.walleij@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Build CONFIG_IMX_SDMA as a module to allow the SDMA firmware be
retrieved after the rootfs is mounted.

This change aligns with the one already done for imx_v6_v7_defconfig
in commit 5a7374ec ("ARM: imx_v6_v7_defconfig: build imx sdma driver
as module").
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Enables clk & pinctrl related configs for Qualcomm IPQ9574 SoC
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230316072940.29137-7-quic_devipriy@quicinc.com

We need to enable some drivers in order to use the following peripherals
of Tarragon:
  * QCA7000/7005 Powerline chip
  * One-Wire Master DS2484 with external thermal sensors
  * external 4 pin PWM fan
  * ST IIS328DQ I2C accelerometer
Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Enable driver for Coresight PMU arch device.
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Both configs were already applied by 2 separate changes,
fix this to avoid:
arch/arm64/configs/defconfig:989:warning: override: reassigning to symbol TYPEC_UCSI
arch/arm64/configs/defconfig:1232:warning: override: reassigning to symbol QCOM_PMIC_GLINK

Fixes: 4ffd0b00 ("arm64: defconfig: add PMIC GLINK modules")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324-topic-sm8450-upstream-defconfig-fixup-v1-1-2d75cc9b3c3d@linaro.org

Due to lack of maintainance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX820 specific defconfig.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm-defconfig-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/defconfig

Renesas ARM defconfig updates for v6.4

  - Enable support for the Dialog Semiconductor DA7213 Codec, and the
    Renesas RZ/V2M xHCI and USB3.1 DRD controllers in the arm64
    defconfig,
  - Disable support for the obsolete R-Car H3 ES1.* (R8A77950) SoC in
    the arm64 defconfig,
  - Refresh shmobile_defconfig for v6.3-rc1,
  - Enable additional support for RZ/N1 platforms in multi_v7_defconfig.

* tag 'renesas-arm-defconfig-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  arm64: defconfig: Enable RZ/V2M xHCI and USB3.1 DRD controller support
  ARM: multi_v7_defconfig: Enable additional support for RZ/N1 platforms
  ARM: shmobile: defconfig: Refresh for v6.3-rc1
  arm64: defconfig: Disable R-Car H3 ES1.*
  arm64: defconfig: Enable DA7213 Codec

Link: https://lore.kernel.org/r/cover.1679907057.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

TI's K3 platform uses McASP as the digital audio interface on the SoCs.
AM62-SK, AM62-LP-SK and AM62A-SK also use the TLV320AIC3106 codec with a
3.5mm jack for analog audio input and output.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20230313-mcasp_upstream-v10-3-94332149657a@ti.comSigned-off-by: Nishanth Menon <nm@ti.com>

Enable drivers used on BeaglePlay[1]:
* MDIO_GPIO driver to workaround erratum i2329, DP83TD510 SPE phy
  (enabled in-kernel to ease usage)
* TPS65219 PMIC, regulator as built-in for sd boot and power button
  as modules. (note: this is also used by am62x-lp-sk as well)
* BQ32K battery backedup RTC and the K3 RTC drivers as modules
* OMAP2 SPI driver as module for accessing mikrobus

bloat-o-meter reports after this change (v6.3-rc1, clang 17.0.0):
add/remove: 63/2 grow/shrink: 3/0 up/down: 17660/-16 (17644)
[...]
Total: Before=27747186, After=27764830, chg +0.06%

[1] https://beagleplay.orgReviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230316152143.2438928-4-nm@ti.comSigned-off-by: Nishanth Menon <nm@ti.com>

Select CONFIG_DRM_I2C_NXP_TDA998X so that HDMI output can work by
default on a imx6sx-udoo-neo board.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Modern versions of FVP_Base_RevC-2xAEMvA contain a Virtio RNG device,
use of which can dramatically speed up the time taken for Linux to
initialize its CRNG, from 10s of seconds in some cases, to instant. This
improves the debug cycle significantly.

However, there are 2 barriers to getting people to use it. The first is
that the defconfig doesn't have the required driver. The second is that
the device is disabled in the device tree (for back-compat since older
versions of the FVP don't have the device). Here we solve the first
issue.
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable CAN PHY transceiver driver to be built as a module which will
add support for generic CAN transceivers used by TI K3 specific SoCs.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable the PMIC GLINK core, altmode, battery and UCSI
aux drivers as module to enable USB Type-C management
over the PMIC GLINK protocol on modern Qcom platforms.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230130-topic-sm8450-upstream-pmic-glink-v5-12-552f3b721f9e@linaro.org

Enable pin controller drivers for several Qualcomm SoCs, as they are
necessary for basic system functionality:
 - main Top Level Mode Multiplexer as built-in for QDU1000, SDM660,
   SDM670, SM6125, SM6350 and SM6375.
 - Low Power Audio (LPASS) TLMM as module for SC7280, SC8280XP, SM8450
   and SM8550.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309155733.662043-1-krzysztof.kozlowski@linaro.org

Enable the rest of qcom clk drivers on arm64, enabling as module,
because there is a support for probe defer on the power-domains.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230217184239.21450-3-pvorel@suse.cz

Switch to module, because there is a support for probe defer on the
power-domains. This should be working since 2b28a1a8 ("driver core:
Extend deferred probe timeout on driver registration")
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230217184239.21450-2-pvorel@suse.cz

In order to have USB 2.0 working on Qualcomm SM8550, both the eUSB2 PHY
and the eUSB2 repeater need to be built as modules.
So select them accordingly.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230320151707.1842171-1-abel.vesa@linaro.org

After disabling platform support there's still some more pruning we can
do to the virtconfig size, there are a number of drivers and subsystems
which are not likely to be useful on mach-virt and so can be disabled in
order to further improve build times. Let's do so, noting that having PCI
device assignment means that PCI devices might potentially appear.

This is just an initial manual passthrough, there will be further savings
available especially if we take a much more focused approach.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230221-arm64-virtconfig-slim-v1-1-604b64be7ec3@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Enable the clock and pinctrl configs for Qualcomm IPQ5332 SoC
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230307062232.4889-10-quic_kathirav@quicinc.com

Enable the i.MX93 ADC driver by default.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The reMarkable 2 uses the rohm,bd71815 power controller, so enable it in
the defconfig.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

This reverts part of commit 015b8cc5 ("wifi: cfg80211: Fix use after
free for wext")

This commit broke WPA offload by unconditionally clearing the crypto
modes for non-WEP connections. Drop that part of the patch.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reported-by: Ilya <me@0upti.me>
Reported-and-tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Fixes: 015b8cc5 ("wifi: cfg80211: Fix use after free for wext")
Cc: stable@kernel.org
Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edfSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull tpm fixes from Jarkko Sakkinen:
 "Two additional bug fixes for v6.3"

* tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: disable hwrng for fTPM on some AMD designs
  tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address

AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS.  This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.

This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439 ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.

So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions.  As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.

It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.

Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it.  If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.

Link: https://www.amd.com/en/support/kb/faq/pa-410
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989
Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/
Fixes: b006c439 ("hwrng: core - start hwrng kthread also for untrusted sources")
Cc: stable@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Tested-by: reach622@mailcuk.com
Tested-by: Bell <1138267643@qq.com>
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.

Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.

The following hardware was used to test this issue:
    Framework Laptop (Pre-production)
    BIOS: INSYDE Corp, Revision: 3.2
    TPM Device: NTC, Firmware Revision: 7.2

Dump of the faulty ACPI TPM2 table:
    [000h 0000   4]                    Signature : "TPM2"    [Trusted Platform Module hardware interface Table]
    [004h 0004   4]                 Table Length : 0000004C
    [008h 0008   1]                     Revision : 04
    [009h 0009   1]                     Checksum : 2B
    [00Ah 0010   6]                       Oem ID : "INSYDE"
    [010h 0016   8]                 Oem Table ID : "TGL-ULT"
    [018h 0024   4]                 Oem Revision : 00000002
    [01Ch 0028   4]              Asl Compiler ID : "ACPI"
    [020h 0032   4]        Asl Compiler Revision : 00040000

    [024h 0036   2]               Platform Class : 0000
    [026h 0038   2]                     Reserved : 0000
    [028h 0040   8]              Control Address : 0000000000000000
    [030h 0048   4]                 Start Method : 06 [Memory Mapped I/O]

    [034h 0052  12]            Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00
    [040h 0064   4]           Minimum Log Length : 00010000
    [044h 0068   8]                  Log Address : 000000004053D000

Fixes: 0cf577a0 ("tpm: Fix handling of missing event log")
Tested-by: Erkki Eilonen <erkki@bearmetal.eu>
Signed-off-by: Morten Linderud <morten@linderud.pw>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Pull xfs fixes from Darrick Wong:

 - Fix a crash if mount time quotacheck fails when there are inodes
   queued for garbage collection.

 - Fix an off by one error when discarding folios after writeback
   failure.

* tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix off-by-one-block in xfs_discard_folio()
  xfs: quotacheck failure can race with background inode inactivation

Pull staging driver fixes and removal from Greg KH:
 "Here are four small staging driver fixes, and one big staging driver
  deletion for 6.3-rc2.

  The fixes are:

   - rtl8192e driver fixes for where the driver was attempting to
     execute various programs directly from the disk for unknown reasons

   - rtl8723bs driver fixes for issues found by Hans in testing

  The deleted driver is the removal of the r8188eu wireless driver as
  now in 6.3-rc1 we have a "real" wifi driver for one that includes
  support for many many more devices than this old driver did. So it's
  time to remove it as it is no longer needed. The maintainers of this
  driver all have acked its removal. Many thanks to them over the years
  for working to clean it up and keep it working while the real driver
  was being developed.

  All of these have been in linux-next this week with no reported
  problems"

* tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8188eu: delete driver
  staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
  staging: rtl8723bs: Fix key-store index handling
  staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
  staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script

Pull x86 fix from Borislav Petkov:
 "A single erratum fix for AMD machines:

   - Disable XSAVES on AMD Zen1 and Zen2 machines due to an erratum. No
     impact to anything as those machines will fallback to XSAVEC which
     is equivalent there"

* tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/CPU/AMD: Disable XSAVES on AMD family 0x17