1. 16 Jun, 2019 8 commits
    • Eric Dumazet's avatar
      ax25: fix inconsistent lock state in ax25_destroy_timer · d4d5d8e8
      Eric Dumazet authored
      Before thread in process context uses bh_lock_sock()
      we must disable bh.
      
      sysbot reported :
      
      WARNING: inconsistent lock state
      5.2.0-rc3+ #32 Not tainted
      
      inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
      blkid/26581 [HC0[0]:SC1[1]:HE1:SE0] takes:
      00000000e0da85ee (slock-AF_AX25){+.?.}, at: spin_lock include/linux/spinlock.h:338 [inline]
      00000000e0da85ee (slock-AF_AX25){+.?.}, at: ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275
      {SOFTIRQ-ON-W} state was registered at:
        lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303
        __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
        _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151
        spin_lock include/linux/spinlock.h:338 [inline]
        ax25_rt_autobind+0x3ca/0x720 net/ax25/ax25_route.c:429
        ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1221
        __sys_connect+0x264/0x330 net/socket.c:1834
        __do_sys_connect net/socket.c:1845 [inline]
        __se_sys_connect net/socket.c:1842 [inline]
        __x64_sys_connect+0x73/0xb0 net/socket.c:1842
        do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
        entry_SYSCALL_64_after_hwframe+0x49/0xbe
      irq event stamp: 2272
      hardirqs last  enabled at (2272): [<ffffffff810065f3>] trace_hardirqs_on_thunk+0x1a/0x1c
      hardirqs last disabled at (2271): [<ffffffff8100660f>] trace_hardirqs_off_thunk+0x1a/0x1c
      softirqs last  enabled at (1522): [<ffffffff87400654>] __do_softirq+0x654/0x94c kernel/softirq.c:320
      softirqs last disabled at (2267): [<ffffffff81449010>] invoke_softirq kernel/softirq.c:374 [inline]
      softirqs last disabled at (2267): [<ffffffff81449010>] irq_exit+0x180/0x1d0 kernel/softirq.c:414
      
      other info that might help us debug this:
       Possible unsafe locking scenario:
      
             CPU0
             ----
        lock(slock-AF_AX25);
        <Interrupt>
          lock(slock-AF_AX25);
      
       *** DEADLOCK ***
      
      1 lock held by blkid/26581:
       #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: lockdep_copy_map include/linux/lockdep.h:175 [inline]
       #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: call_timer_fn+0xe0/0x720 kernel/time/timer.c:1312
      
      stack backtrace:
      CPU: 1 PID: 26581 Comm: blkid Not tainted 5.2.0-rc3+ #32
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      Call Trace:
       <IRQ>
       __dump_stack lib/dump_stack.c:77 [inline]
       dump_stack+0x172/0x1f0 lib/dump_stack.c:113
       print_usage_bug.cold+0x393/0x4a2 kernel/locking/lockdep.c:2935
       valid_state kernel/locking/lockdep.c:2948 [inline]
       mark_lock_irq kernel/locking/lockdep.c:3138 [inline]
       mark_lock+0xd46/0x1370 kernel/locking/lockdep.c:3513
       mark_irqflags kernel/locking/lockdep.c:3391 [inline]
       __lock_acquire+0x159f/0x5490 kernel/locking/lockdep.c:3745
       lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303
       __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
       _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151
       spin_lock include/linux/spinlock.h:338 [inline]
       ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275
       call_timer_fn+0x193/0x720 kernel/time/timer.c:1322
       expire_timers kernel/time/timer.c:1366 [inline]
       __run_timers kernel/time/timer.c:1685 [inline]
       __run_timers kernel/time/timer.c:1653 [inline]
       run_timer_softirq+0x66f/0x1740 kernel/time/timer.c:1698
       __do_softirq+0x25c/0x94c kernel/softirq.c:293
       invoke_softirq kernel/softirq.c:374 [inline]
       irq_exit+0x180/0x1d0 kernel/softirq.c:414
       exiting_irq arch/x86/include/asm/apic.h:536 [inline]
       smp_apic_timer_interrupt+0x13b/0x550 arch/x86/kernel/apic/apic.c:1068
       apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:806
       </IRQ>
      RIP: 0033:0x7f858d5c3232
      Code: 8b 61 08 48 8b 84 24 d8 00 00 00 4c 89 44 24 28 48 8b ac 24 d0 00 00 00 4c 8b b4 24 e8 00 00 00 48 89 7c 24 68 48 89 4c 24 78 <48> 89 44 24 58 8b 84 24 e0 00 00 00 89 84 24 84 00 00 00 8b 84 24
      RSP: 002b:00007ffcaf0cf5c0 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
      RAX: 00007f858d7d27a8 RBX: 00007f858d7d8820 RCX: 00007f858d3940d8
      RDX: 00007ffcaf0cf798 RSI: 00000000f5e616f3 RDI: 00007f858d394fee
      RBP: 0000000000000000 R08: 00007ffcaf0cf780 R09: 00007f858d7db480
      R10: 0000000000000000 R11: 0000000009691a75 R12: 0000000000000005
      R13: 00000000f5e616f3 R14: 0000000000000000 R15: 00007ffcaf0cf798
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d4d5d8e8
    • Eric Dumazet's avatar
      neigh: fix use-after-free read in pneigh_get_next · f3e92cb8
      Eric Dumazet authored
      Nine years ago, I added RCU handling to neighbours, not pneighbours.
      (pneigh are not commonly used)
      
      Unfortunately I missed that /proc dump operations would use a
      common entry and exit point : neigh_seq_start() and neigh_seq_stop()
      
      We need to read_lock(tbl->lock) or risk use-after-free while
      iterating the pneigh structures.
      
      We might later convert pneigh to RCU and revert this patch.
      
      sysbot reported :
      
      BUG: KASAN: use-after-free in pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158
      Read of size 8 at addr ffff888097f2a700 by task syz-executor.0/9825
      
      CPU: 1 PID: 9825 Comm: syz-executor.0 Not tainted 5.2.0-rc4+ #32
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      Call Trace:
       __dump_stack lib/dump_stack.c:77 [inline]
       dump_stack+0x172/0x1f0 lib/dump_stack.c:113
       print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188
       __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
       kasan_report+0x12/0x20 mm/kasan/common.c:614
       __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132
       pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158
       neigh_seq_next+0xdb/0x210 net/core/neighbour.c:3240
       seq_read+0x9cf/0x1110 fs/seq_file.c:258
       proc_reg_read+0x1fc/0x2c0 fs/proc/inode.c:221
       do_loop_readv_writev fs/read_write.c:714 [inline]
       do_loop_readv_writev fs/read_write.c:701 [inline]
       do_iter_read+0x4a4/0x660 fs/read_write.c:935
       vfs_readv+0xf0/0x160 fs/read_write.c:997
       kernel_readv fs/splice.c:359 [inline]
       default_file_splice_read+0x475/0x890 fs/splice.c:414
       do_splice_to+0x127/0x180 fs/splice.c:877
       splice_direct_to_actor+0x2d2/0x970 fs/splice.c:954
       do_splice_direct+0x1da/0x2a0 fs/splice.c:1063
       do_sendfile+0x597/0xd00 fs/read_write.c:1464
       __do_sys_sendfile64 fs/read_write.c:1525 [inline]
       __se_sys_sendfile64 fs/read_write.c:1511 [inline]
       __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511
       do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      RIP: 0033:0x4592c9
      Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
      RSP: 002b:00007f4aab51dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
      RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000004592c9
      RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005
      RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
      R10: 0000000080000000 R11: 0000000000000246 R12: 00007f4aab51e6d4
      R13: 00000000004c689d R14: 00000000004db828 R15: 00000000ffffffff
      
      Allocated by task 9827:
       save_stack+0x23/0x90 mm/kasan/common.c:71
       set_track mm/kasan/common.c:79 [inline]
       __kasan_kmalloc mm/kasan/common.c:489 [inline]
       __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462
       kasan_kmalloc+0x9/0x10 mm/kasan/common.c:503
       __do_kmalloc mm/slab.c:3660 [inline]
       __kmalloc+0x15c/0x740 mm/slab.c:3669
       kmalloc include/linux/slab.h:552 [inline]
       pneigh_lookup+0x19c/0x4a0 net/core/neighbour.c:731
       arp_req_set_public net/ipv4/arp.c:1010 [inline]
       arp_req_set+0x613/0x720 net/ipv4/arp.c:1026
       arp_ioctl+0x652/0x7f0 net/ipv4/arp.c:1226
       inet_ioctl+0x2a0/0x340 net/ipv4/af_inet.c:926
       sock_do_ioctl+0xd8/0x2f0 net/socket.c:1043
       sock_ioctl+0x3ed/0x780 net/socket.c:1194
       vfs_ioctl fs/ioctl.c:46 [inline]
       file_ioctl fs/ioctl.c:509 [inline]
       do_vfs_ioctl+0xd5f/0x1380 fs/ioctl.c:696
       ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
       __do_sys_ioctl fs/ioctl.c:720 [inline]
       __se_sys_ioctl fs/ioctl.c:718 [inline]
       __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
       do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      Freed by task 9824:
       save_stack+0x23/0x90 mm/kasan/common.c:71
       set_track mm/kasan/common.c:79 [inline]
       __kasan_slab_free+0x102/0x150 mm/kasan/common.c:451
       kasan_slab_free+0xe/0x10 mm/kasan/common.c:459
       __cache_free mm/slab.c:3432 [inline]
       kfree+0xcf/0x220 mm/slab.c:3755
       pneigh_ifdown_and_unlock net/core/neighbour.c:812 [inline]
       __neigh_ifdown+0x236/0x2f0 net/core/neighbour.c:356
       neigh_ifdown+0x20/0x30 net/core/neighbour.c:372
       arp_ifdown+0x1d/0x21 net/ipv4/arp.c:1274
       inetdev_destroy net/ipv4/devinet.c:319 [inline]
       inetdev_event+0xa14/0x11f0 net/ipv4/devinet.c:1544
       notifier_call_chain+0xc2/0x230 kernel/notifier.c:95
       __raw_notifier_call_chain kernel/notifier.c:396 [inline]
       raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:403
       call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1749
       call_netdevice_notifiers_extack net/core/dev.c:1761 [inline]
       call_netdevice_notifiers net/core/dev.c:1775 [inline]
       rollback_registered_many+0x9b9/0xfc0 net/core/dev.c:8178
       rollback_registered+0x109/0x1d0 net/core/dev.c:8220
       unregister_netdevice_queue net/core/dev.c:9267 [inline]
       unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9260
       unregister_netdevice include/linux/netdevice.h:2631 [inline]
       __tun_detach+0xd8a/0x1040 drivers/net/tun.c:724
       tun_detach drivers/net/tun.c:741 [inline]
       tun_chr_close+0xe0/0x180 drivers/net/tun.c:3451
       __fput+0x2ff/0x890 fs/file_table.c:280
       ____fput+0x16/0x20 fs/file_table.c:313
       task_work_run+0x145/0x1c0 kernel/task_work.c:113
       tracehook_notify_resume include/linux/tracehook.h:185 [inline]
       exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:168
       prepare_exit_to_usermode arch/x86/entry/common.c:199 [inline]
       syscall_return_slowpath arch/x86/entry/common.c:279 [inline]
       do_syscall_64+0x58e/0x680 arch/x86/entry/common.c:304
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      The buggy address belongs to the object at ffff888097f2a700
       which belongs to the cache kmalloc-64 of size 64
      The buggy address is located 0 bytes inside of
       64-byte region [ffff888097f2a700, ffff888097f2a740)
      The buggy address belongs to the page:
      page:ffffea00025fca80 refcount:1 mapcount:0 mapping:ffff8880aa400340 index:0x0
      flags: 0x1fffc0000000200(slab)
      raw: 01fffc0000000200 ffffea000250d548 ffffea00025726c8 ffff8880aa400340
      raw: 0000000000000000 ffff888097f2a000 0000000100000020 0000000000000000
      page dumped because: kasan: bad access detected
      
      Memory state around the buggy address:
       ffff888097f2a600: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
       ffff888097f2a680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
      >ffff888097f2a700: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
                         ^
       ffff888097f2a780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
       ffff888097f2a800: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
      
      Fixes: 767e97e1 ("neigh: RCU conversion of struct neighbour")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f3e92cb8
    • Eric Dumazet's avatar
      tcp: fix compile error if !CONFIG_SYSCTL · 2e05fcae
      Eric Dumazet authored
      tcp_tx_skb_cache_key and tcp_rx_skb_cache_key must be available
      even if CONFIG_SYSCTL is not set.
      
      Fixes: 0b7d7f6b ("tcp: add tcp_tx_skb_cache sysctl")
      Fixes: ede61ca4 ("tcp: add tcp_rx_skb_cache sysctl")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarWillem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2e05fcae
    • Dexuan Cui's avatar
      hv_sock: Suppress bogus "may be used uninitialized" warnings · d424a2af
      Dexuan Cui authored
      gcc 8.2.0 may report these bogus warnings under some condition:
      
      warning: ‘vnew’ may be used uninitialized in this function
      warning: ‘hvs_new’ may be used uninitialized in this function
      
      Actually, the 2 pointers are only initialized and used if the variable
      "conn_from_host" is true. The code is not buggy here.
      Signed-off-by: default avatarDexuan Cui <decui@microsoft.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d424a2af
    • Ivan Vecera's avatar
      be2net: Fix number of Rx queues used for flow hashing · 718f4a25
      Ivan Vecera authored
      Number of Rx queues used for flow hashing returned by the driver is
      incorrect and this bug prevents user to use the last Rx queue in
      indirection table.
      
      Let's say we have a NIC with 6 combined queues:
      
      [root@sm-03 ~]# ethtool -l enp4s0f0
      Channel parameters for enp4s0f0:
      Pre-set maximums:
      RX:             5
      TX:             5
      Other:          0
      Combined:       6
      Current hardware settings:
      RX:             0
      TX:             0
      Other:          0
      Combined:       6
      
      Default indirection table maps all (6) queues equally but the driver
      reports only 5 rings available.
      
      [root@sm-03 ~]# ethtool -x enp4s0f0
      RX flow hash indirection table for enp4s0f0 with 5 RX ring(s):
          0:      0     1     2     3     4     5     0     1
          8:      2     3     4     5     0     1     2     3
         16:      4     5     0     1     2     3     4     5
         24:      0     1     2     3     4     5     0     1
      ...
      
      Now change indirection table somehow:
      
      [root@sm-03 ~]# ethtool -X enp4s0f0 weight 1 1
      [root@sm-03 ~]# ethtool -x enp4s0f0
      RX flow hash indirection table for enp4s0f0 with 6 RX ring(s):
          0:      0     0     0     0     0     0     0     0
      ...
         64:      1     1     1     1     1     1     1     1
      ...
      
      Now it is not possible to change mapping back to equal (default) state:
      
      [root@sm-03 ~]# ethtool -X enp4s0f0 equal 6
      Cannot set RX flow hash configuration: Invalid argument
      
      Fixes: 594ad54a ("be2net: Add support for setting and getting rx flow hash options")
      Reported-by: default avatarTianhao <tizhao@redhat.com>
      Signed-off-by: default avatarIvan Vecera <ivecera@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      718f4a25
    • Govindarajulu Varadarajan's avatar
      net: handle 802.1P vlan 0 packets properly · 36b2f61a
      Govindarajulu Varadarajan authored
      When stack receives pkt: [802.1P vlan 0][802.1AD vlan 100][IPv4],
      vlan_do_receive() returns false if it does not find vlan_dev. Later
      __netif_receive_skb_core() fails to find packet type handler for
      skb->protocol 801.1AD and drops the packet.
      
      801.1P header with vlan id 0 should be handled as untagged packets.
      This patch fixes it by checking if vlan_id is 0 and processes next vlan
      header.
      Signed-off-by: default avatarGovindarajulu Varadarajan <gvaradar@cisco.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      36b2f61a
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf · 1eb4169c
      David S. Miller authored
      Alexei Starovoitov says:
      
      ====================
      pull-request: bpf 2019-06-15
      
      The following pull-request contains BPF updates for your *net* tree.
      
      The main changes are:
      
      1) fix stack layout of JITed x64 bpf code, from Alexei.
      
      2) fix out of bounds memory access in bpf_sk_storage, from Arthur.
      
      3) fix lpm trie walk, from Jonathan.
      
      4) fix nested bpf_perf_event_output, from Matt.
      
      5) and several other fixes.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1eb4169c
    • David S. Miller's avatar
      Revert "net: phylink: set the autoneg state in phylink_phy_change" · 5db2e7c7
      David S. Miller authored
      This reverts commit ef7bfa84.
      
      Russell King espressed some strong opposition to this
      change, explaining that this is trying to make phylink
      behave outside of how it has been designed.
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5db2e7c7
  2. 15 Jun, 2019 21 commits
    • Matt Mullins's avatar
      bpf: fix nested bpf tracepoints with per-cpu data · 9594dc3c
      Matt Mullins authored
      BPF_PROG_TYPE_RAW_TRACEPOINTs can be executed nested on the same CPU, as
      they do not increment bpf_prog_active while executing.
      
      This enables three levels of nesting, to support
        - a kprobe or raw tp or perf event,
        - another one of the above that irq context happens to call, and
        - another one in nmi context
      (at most one of which may be a kprobe or perf event).
      
      Fixes: 20b9d7ac ("bpf: avoid excessive stack usage for perf_sample_data")
      Signed-off-by: default avatarMatt Mullins <mmullins@fb.com>
      Acked-by: default avatarAndrii Nakryiko <andriin@fb.com>
      Acked-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      9594dc3c
    • Arthur Fabre's avatar
      bpf: Fix out of bounds memory access in bpf_sk_storage · 85749218
      Arthur Fabre authored
      bpf_sk_storage maps use multiple spin locks to reduce contention.
      The number of locks to use is determined by the number of possible CPUs.
      With only 1 possible CPU, bucket_log == 0, and 2^0 = 1 locks are used.
      
      When updating elements, the correct lock is determined with hash_ptr().
      Calling hash_ptr() with 0 bits is undefined behavior, as it does:
      
      x >> (64 - bits)
      
      Using the value results in an out of bounds memory access.
      In my case, this manifested itself as a page fault when raw_spin_lock_bh()
      is called later, when running the self tests:
      
      ./tools/testing/selftests/bpf/test_verifier 773 775
      [   16.366342] BUG: unable to handle page fault for address: ffff8fe7a66f93f8
      
      Force the minimum number of locks to two.
      Signed-off-by: default avatarArthur Fabre <afabre@cloudflare.com>
      Fixes: 6ac99e8f ("bpf: Introduce bpf sk local storage")
      Acked-by: default avatarAndrii Nakryiko <andriin@fb.com>
      Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      85749218
    • Stephen Barber's avatar
      vsock/virtio: set SOCK_DONE on peer shutdown · 42f5cda5
      Stephen Barber authored
      Set the SOCK_DONE flag to match the TCP_CLOSING state when a peer has
      shut down and there is nothing left to read.
      
      This fixes the following bug:
      1) Peer sends SHUTDOWN(RDWR).
      2) Socket enters TCP_CLOSING but SOCK_DONE is not set.
      3) read() returns -ENOTCONN until close() is called, then returns 0.
      Signed-off-by: default avatarStephen Barber <smbarber@chromium.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      42f5cda5
    • Linus Walleij's avatar
      net: dsa: rtl8366: Fix up VLAN filtering · 760c80b7
      Linus Walleij authored
      We get this regression when using RTL8366RB as part of a bridge
      with OpenWrt:
      
      WARNING: CPU: 0 PID: 1347 at net/switchdev/switchdev.c:291
      	 switchdev_port_attr_set_now+0x80/0xa4
      lan0: Commit of attribute (id=7) failed.
      (...)
      realtek-smi switch lan0: failed to initialize vlan filtering on this port
      
      This is because it is trying to disable VLAN filtering
      on VLAN0, as we have forgot to add 1 to the port number
      to get the right VLAN in rtl8366_vlan_filtering(): when
      we initialize the VLAN we associate VLAN1 with port 0,
      VLAN2 with port 1 etc, so we need to add 1 to the port
      offset.
      
      Fixes: d8652956 ("net: dsa: realtek-smi: Add Realtek SMI driver")
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      760c80b7
    • Ioana Ciornei's avatar
      net: phylink: set the autoneg state in phylink_phy_change · ef7bfa84
      Ioana Ciornei authored
      The phy_state field of phylink should carry only valid information
      especially when this can be passed to the .mac_config callback.
      Update the an_enabled field with the autoneg state in the
      phylink_phy_change function.
      
      Fixes: 9525ae83 ("phylink: add phylink infrastructure")
      Signed-off-by: default avatarIoana Ciornei <ioana.ciornei@nxp.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ef7bfa84
    • David S. Miller's avatar
      Merge branch 'tcp-add-three-static-keys' · 35fc07ae
      David S. Miller authored
      Eric Dumazet says:
      
      ====================
      tcp: add three static keys
      
      Recent addition of per TCP socket rx/tx cache brought
      regressions for some workloads, as reported by Feng Tang.
      
      It seems better to make them opt-in, before we adopt better
      heuristics.
      
      The last patch adds high_order_alloc_disable sysctl
      to ask TCP sendmsg() to exclusively use order-0 allocations,
      as mm layer has specific optimizations.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      35fc07ae
    • Eric Dumazet's avatar
      net: add high_order_alloc_disable sysctl/static key · ce27ec60
      Eric Dumazet authored
      >From linux-3.7, (commit 5640f768 "net: use a per task frag
      allocator") TCP sendmsg() has preferred using order-3 allocations.
      
      While it gives good results for most cases, we had reports
      that heavy uses of TCP over loopback were hitting a spinlock
      contention in page allocations/freeing.
      
      This commits adds a sysctl so that admins can opt-in
      for order-0 allocations. Hopefully mm layer might optimize
      order-3 allocations in the future since it could give us
      a nice boost  (see 8 lines of following benchmark)
      
      The following benchmark shows a win when more than 8 TCP_STREAM
      threads are running (56 x86 cores server in my tests)
      
      for thr in {1..30}
      do
       sysctl -wq net.core.high_order_alloc_disable=0
       T0=`./super_netperf $thr -H 127.0.0.1 -l 15`
       sysctl -wq net.core.high_order_alloc_disable=1
       T1=`./super_netperf $thr -H 127.0.0.1 -l 15`
       echo $thr:$T0:$T1
      done
      
      1: 49979: 37267
      2: 98745: 76286
      3: 141088: 110051
      4: 177414: 144772
      5: 197587: 173563
      6: 215377: 208448
      7: 241061: 234087
      8: 267155: 263373
      9: 295069: 297402
      10: 312393: 335213
      11: 340462: 368778
      12: 371366: 403954
      13: 412344: 443713
      14: 426617: 473580
      15: 474418: 507861
      16: 503261: 538539
      17: 522331: 563096
      18: 532409: 567084
      19: 550824: 605240
      20: 525493: 641988
      21: 564574: 665843
      22: 567349: 690868
      23: 583846: 710917
      24: 588715: 736306
      25: 603212: 763494
      26: 604083: 792654
      27: 602241: 796450
      28: 604291: 797993
      29: 611610: 833249
      30: 577356: 841062
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ce27ec60
    • Eric Dumazet's avatar
      tcp: add tcp_tx_skb_cache sysctl · 0b7d7f6b
      Eric Dumazet authored
      Feng Tang reported a performance regression after introduction
      of per TCP socket tx/rx caches, for TCP over loopback (netperf)
      
      There is high chance the regression is caused by a change on
      how well the 32 KB per-thread page (current->task_frag) can
      be recycled, and lack of pcp caches for order-3 pages.
      
      I could not reproduce the regression myself, cpus all being
      spinning on the mm spinlocks for page allocs/freeing, regardless
      of enabling or disabling the per tcp socket caches.
      
      It seems best to disable the feature by default, and let
      admins enabling it.
      
      MM layer either needs to provide scalable order-3 pages
      allocations, or could attempt a trylock on zone->lock if
      the caller only attempts to get a high-order page and is
      able to fallback to order-0 ones in case of pressure.
      
      Tests run on a 56 cores host (112 hyper threads)
      
      -	35.49%	netperf 		 [kernel.vmlinux]	  [k] queued_spin_lock_slowpath
         - 35.49% queued_spin_lock_slowpath
      	  - 18.18% get_page_from_freelist
      		 - __alloc_pages_nodemask
      			- 18.18% alloc_pages_current
      				 skb_page_frag_refill
      				 sk_page_frag_refill
      				 tcp_sendmsg_locked
      				 tcp_sendmsg
      				 inet_sendmsg
      				 sock_sendmsg
      				 __sys_sendto
      				 __x64_sys_sendto
      				 do_syscall_64
      				 entry_SYSCALL_64_after_hwframe
      				 __libc_send
      	  + 17.31% __free_pages_ok
      +	31.43%	swapper 		 [kernel.vmlinux]	  [k] intel_idle
      +	 9.12%	netperf 		 [kernel.vmlinux]	  [k] copy_user_enhanced_fast_string
      +	 6.53%	netserver		 [kernel.vmlinux]	  [k] copy_user_enhanced_fast_string
      +	 0.69%	netserver		 [kernel.vmlinux]	  [k] queued_spin_lock_slowpath
      +	 0.68%	netperf 		 [kernel.vmlinux]	  [k] skb_release_data
      +	 0.52%	netperf 		 [kernel.vmlinux]	  [k] tcp_sendmsg_locked
      	 0.46%	netperf 		 [kernel.vmlinux]	  [k] _raw_spin_lock_irqsave
      
      Fixes: 472c2e07 ("tcp: add one skb cache for tx")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarFeng Tang <feng.tang@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0b7d7f6b
    • Eric Dumazet's avatar
      tcp: add tcp_rx_skb_cache sysctl · ede61ca4
      Eric Dumazet authored
      Instead of relying on rps_needed, it is safer to use a separate
      static key, since we do not want to enable TCP rx_skb_cache
      by default. This feature can cause huge increase of memory
      usage on hosts with millions of sockets.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ede61ca4
    • Eric Dumazet's avatar
      sysctl: define proc_do_static_key() · a8e11e5c
      Eric Dumazet authored
      Convert proc_dointvec_minmax_bpf_stats() into a more generic
      helper, since we are going to use jump labels more often.
      
      Note that sysctl_bpf_stats_enabled is removed, since
      it is no longer needed/used.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a8e11e5c
    • Haiyang Zhang's avatar
      hv_netvsc: Set probe mode to sync · 9a33629b
      Haiyang Zhang authored
      For better consistency of synthetic NIC names, we set the probe mode to
      PROBE_FORCE_SYNCHRONOUS. So the names can be aligned with the vmbus
      channel offer sequence.
      
      Fixes: af0a5646 ("use the new async probing feature for the hyperv drivers")
      Signed-off-by: default avatarHaiyang Zhang <haiyangz@microsoft.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9a33629b
    • Vlad Buslov's avatar
      net: sched: flower: don't call synchronize_rcu() on mask creation · 99815f50
      Vlad Buslov authored
      Current flower mask creating code assumes that temporary mask that is used
      when inserting new filter is stack allocated. To prevent race condition
      with data patch synchronize_rcu() is called every time fl_create_new_mask()
      replaces temporary stack allocated mask. As reported by Jiri, this
      increases runtime of creating 20000 flower classifiers from 4 seconds to
      163 seconds. However, this design is no longer necessary since temporary
      mask was converted to be dynamically allocated by commit 2cddd201
      ("net/sched: cls_flower: allocate mask dynamically in fl_change()").
      
      Remove synchronize_rcu() calls from mask creation code. Instead, refactor
      fl_change() to always deallocate temporary mask with rcu grace period.
      
      Fixes: 195c234d ("net: sched: flower: handle concurrent mask insertion")
      Reported-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarVlad Buslov <vladbu@mellanox.com>
      Tested-by: default avatarJiri Pirko <jiri@mellanox.com>
      Acked-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      99815f50
    • Anders Roxell's avatar
      net: dsa: fix warning same module names · f0c03ee0
      Anders Roxell authored
      When building with CONFIG_NET_DSA_REALTEK_SMI and CONFIG_REALTEK_PHY
      enabled as loadable modules, we see the following warning:
      
      warning: same module names found:
        drivers/net/phy/realtek.ko
        drivers/net/dsa/realtek.ko
      
      Rework so the driver name is realtek-smi instead of realtek.
      Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarAnders Roxell <anders.roxell@linaro.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f0c03ee0
    • Neil Horman's avatar
      sctp: Free cookie before we memdup a new one · ce950f10
      Neil Horman authored
      Based on comments from Xin, even after fixes for our recent syzbot
      report of cookie memory leaks, its possible to get a resend of an INIT
      chunk which would lead to us leaking cookie memory.
      
      To ensure that we don't leak cookie memory, free any previously
      allocated cookie first.
      
      Change notes
      v1->v2
      update subsystem tag in subject (davem)
      repeat kfree check for peer_random and peer_hmacs (xin)
      
      v2->v3
      net->sctp
      also free peer_chunks
      
      v3->v4
      fix subject tags
      
      v4->v5
      remove cut line
      Signed-off-by: default avatarNeil Horman <nhorman@tuxdriver.com>
      Reported-by: syzbot+f7e9153b037eac9b1df8@syzkaller.appspotmail.com
      CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      CC: Xin Long <lucien.xin@gmail.com>
      CC: "David S. Miller" <davem@davemloft.net>
      CC: netdev@vger.kernel.org
      Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ce950f10
    • Robert Hancock's avatar
      net: dsa: microchip: Don't try to read stats for unused ports · 6bb9e376
      Robert Hancock authored
      If some of the switch ports were not listed in the device tree, due to
      being unused, the ksz_mib_read_work function ended up accessing a NULL
      dp->slave pointer and causing an oops. Skip checking statistics for any
      unused ports.
      
      Fixes: 7c6ff470 ("net: dsa: microchip: add MIB counter reading support")
      Signed-off-by: default avatarRobert Hancock <hancock@sedsystems.ca>
      Reviewed-by: default avatarVivien Didelot <vivien.didelot@gmail.com>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6bb9e376
    • David S. Miller's avatar
      Merge branch 'qmi_wwan-fix-QMAP-handling' · 2309f517
      David S. Miller authored
      Reinhard Speyerer says:
      
      ====================
      qmi_wwan: fix QMAP handling
      
      This series addresses the following issues observed when using the
      QMAP support of the qmi_wwan driver:
      
      1. The QMAP code in the qmi_wwan driver is based on the CodeAurora
         GobiNet driver ([1], [2]) which does not process QMAP padding
         in the RX path correctly. This causes qmimux_rx_fixup() to pass
         incorrect data to the IP stack when padding is used.
      
      2. qmimux devices currently lack proper network device usage statistics.
      
      3. RCU stalls on device disconnect with QMAP activated like this
      
         # echo Y > /sys/class/net/wwan0/qmi/raw_ip
         # echo 1 > /sys/class/net/wwan0/qmi/add_mux
         # echo 2 > /sys/class/net/wwan0/qmi/add_mux
         # echo 3 > /sys/class/net/wwan0/qmi/add_mux
      
         have been observed in certain setups:
      
         [ 2273.676593] option1 ttyUSB16: GSM modem (1-port) converter now disconnected from ttyUSB16
         [ 2273.676617] option 6-1.2:1.0: device disconnected
         [ 2273.676774] WARNING: CPU: 1 PID: 141 at kernel/rcu/tree_plugin.h:342 rcu_note_context_switch+0x2a/0x3d0
         [ 2273.676776] Modules linked in: option qmi_wwan cdc_mbim cdc_ncm qcserial cdc_wdm usb_wwan sierra sierra_net usbnet mii edd coretemp iptable_mangle ip6_tables iptable_filter ip_tables cdc_acm dm_mod dax iTCO_wdt evdev iTCO_vendor_support sg ftdi_sio usbserial e1000e ptp pps_core i2c_i801 ehci_pci button lpc_ich i2c_core mfd_core uhci_hcd ehci_hcd rtc_cmos usbcore usb_common sd_mod fan ata_piix thermal
         [ 2273.676817] CPU: 1 PID: 141 Comm: kworker/1:1 Not tainted 4.19.38-rsp-1 #1
         [ 2273.676819] Hardware name: Not Applicable   Not Applicable  /CX-GS/GM45-GL40             , BIOS V1.11      03/23/2011
         [ 2273.676828] Workqueue: usb_hub_wq hub_event [usbcore]
         [ 2273.676832] EIP: rcu_note_context_switch+0x2a/0x3d0
         [ 2273.676834] Code: 55 89 e5 57 56 89 c6 53 83 ec 14 89 45 f0 e8 5d ff ff ff 89 f0 64 8b 3d 24 a6 86 c0 84 c0 8b 87 04 02 00 00 75 7a 85 c0 7e 7a <0f> 0b 80 bf 08 02 00 00 00 0f 84 87 00 00 00 e8 b2 e2 ff ff bb dc
         [ 2273.676836] EAX: 00000001 EBX: f614bc00 ECX: 00000001 EDX: c0715b81
         [ 2273.676838] ESI: 00000000 EDI: f18beb40 EBP: f1a3dc20 ESP: f1a3dc00
         [ 2273.676840] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010002
         [ 2273.676842] CR0: 80050033 CR2: b7e97230 CR3: 2f9c4000 CR4: 000406b0
         [ 2273.676843] Call Trace:
         [ 2273.676847]  ? preempt_count_add+0xa5/0xc0
         [ 2273.676852]  __schedule+0x4e/0x4f0
         [ 2273.676855]  ? __queue_work+0xf1/0x2a0
         [ 2273.676858]  ? _raw_spin_lock_irqsave+0x14/0x40
         [ 2273.676860]  ? preempt_count_add+0x52/0xc0
         [ 2273.676862]  schedule+0x33/0x80
         [ 2273.676865]  _synchronize_rcu_expedited+0x24e/0x280
         [ 2273.676867]  ? rcu_accelerate_cbs_unlocked+0x70/0x70
         [ 2273.676871]  ? wait_woken+0x70/0x70
         [ 2273.676873]  ? rcu_accelerate_cbs_unlocked+0x70/0x70
         [ 2273.676875]  ? _synchronize_rcu_expedited+0x280/0x280
         [ 2273.676877]  synchronize_rcu_expedited+0x22/0x30
         [ 2273.676881]  synchronize_net+0x25/0x30
         [ 2273.676885]  dev_deactivate_many+0x133/0x230
         [ 2273.676887]  ? preempt_count_add+0xa5/0xc0
         [ 2273.676890]  __dev_close_many+0x4d/0xc0
         [ 2273.676892]  ? skb_dequeue+0x40/0x50
         [ 2273.676895]  dev_close_many+0x5d/0xd0
         [ 2273.676898]  rollback_registered_many+0xbf/0x4c0
         [ 2273.676901]  ? raw_notifier_call_chain+0x1a/0x20
         [ 2273.676904]  ? call_netdevice_notifiers_info+0x23/0x60
         [ 2273.676906]  ? netdev_master_upper_dev_get+0xe/0x70
         [ 2273.676908]  rollback_registered+0x1f/0x30
         [ 2273.676911]  unregister_netdevice_queue+0x47/0xb0
         [ 2273.676915]  qmimux_unregister_device+0x1f/0x30 [qmi_wwan]
         [ 2273.676917]  qmi_wwan_disconnect+0x5d/0x90 [qmi_wwan]
         ...
         [ 2273.677001] ---[ end trace 0fcc5f88496b485a ]---
         [ 2294.679136] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
         [ 2294.679140] rcu: 	Tasks blocked on level-0 rcu_node (CPUs 0-1): P141
         [ 2294.679144] rcu: 	(detected by 0, t=21002 jiffies, g=265857, q=8446)
         [ 2294.679148] kworker/1:1     D    0   141      2 0x80000000
      
      In addition the permitted QMAP mux_id value range is extended for
      compatibility with ip(8) and the rmnet driver.
      
      Reinhard
      
      [1]: https://portland.source.codeaurora.org/patches/quic/gobi
      [2]: https://portland.source.codeaurora.org/quic/qsdk/oss/lklm/gobinet/
      ====================
      Tested-by: default avatarDaniele Palmas <dnlplm@gmail.com>
      Acked-by: default avatarBjørn Mork <bjorn@mork.no>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2309f517
    • Reinhard Speyerer's avatar
      qmi_wwan: extend permitted QMAP mux_id value range · 36815b41
      Reinhard Speyerer authored
      Permit mux_id values up to 254 to be used in qmimux_register_device()
      for compatibility with ip(8) and the rmnet driver.
      
      Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support")
      Cc: Daniele Palmas <dnlplm@gmail.com>
      Signed-off-by: default avatarReinhard Speyerer <rspmn@arcor.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      36815b41
    • Reinhard Speyerer's avatar
      qmi_wwan: avoid RCU stalls on device disconnect when in QMAP mode · a8fdde1c
      Reinhard Speyerer authored
      Switch qmimux_unregister_device() and qmi_wwan_disconnect() to
      use unregister_netdevice_queue() and unregister_netdevice_many()
      instead of unregister_netdevice(). This avoids RCU stalls which
      have been observed on device disconnect in certain setups otherwise.
      
      Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support")
      Cc: Daniele Palmas <dnlplm@gmail.com>
      Signed-off-by: default avatarReinhard Speyerer <rspmn@arcor.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a8fdde1c
    • Reinhard Speyerer's avatar
      qmi_wwan: add network device usage statistics for qmimux devices · 44f82312
      Reinhard Speyerer authored
      Add proper network device usage statistics for qmimux devices
      instead of reporting all-zero values for them.
      
      Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support")
      Cc: Daniele Palmas <dnlplm@gmail.com>
      Signed-off-by: default avatarReinhard Speyerer <rspmn@arcor.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      44f82312
    • Reinhard Speyerer's avatar
      qmi_wwan: add support for QMAP padding in the RX path · 61356088
      Reinhard Speyerer authored
      The QMAP code in the qmi_wwan driver is based on the CodeAurora GobiNet
      driver which does not process QMAP padding in the RX path correctly.
      Add support for QMAP padding to qmimux_rx_fixup() according to the
      description of the rmnet driver.
      
      Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support")
      Cc: Daniele Palmas <dnlplm@gmail.com>
      Signed-off-by: default avatarReinhard Speyerer <rspmn@arcor.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      61356088
    • Alexei Starovoitov's avatar
      bpf, x64: fix stack layout of JITed bpf code · fe8d9571
      Alexei Starovoitov authored
      Since commit 177366bf the %rbp stopped pointing to %rbp of the
      previous stack frame. That broke frame pointer based stack unwinding.
      This commit is a partial revert of it.
      Note that the location of tail_call_cnt is fixed, since the verifier
      enforces MAX_BPF_STACK stack size for programs with tail calls.
      
      Fixes: 177366bf ("bpf: change x86 JITed program stack layout")
      Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      fe8d9571
  3. 14 Jun, 2019 11 commits