- 18 Mar, 2018 27 commits
-
-
Michael Lyle authored
commit 86755b7a upstream. This can happen e.g. during disk cloning. This is an incomplete fix: it does not catch duplicate UUIDs earlier when things are still unattached. It does not unregister the device. Further changes to cope better with this are planned but conflict with Coly's ongoing improvements to handling device errors. In the meantime, one can manually stop the device after this has happened. Attempts to attach a duplicate device result in: [ 136.372404] loop: module loaded [ 136.424461] bcache: register_bdev() registered backing device loop0 [ 136.424464] bcache: bch_cached_dev_attach() Tried to attach loop0 but duplicate UUID already attached My test procedure is: dd if=/dev/sdb1 of=imgfile bs=1024 count=262144 losetup -f imgfile Signed-off-by:
Michael Lyle <mlyle@lyle.org> Reviewed-by:
Tang Junhui <tang.junhui@zte.com.cn> Cc: <stable@vger.kernel.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tang Junhui authored
commit cc40daf9 upstream. Kernel crashed when register a duplicate cache device, the call trace is bellow: [ 417.643790] CPU: 1 PID: 16886 Comm: bcache-register Tainted: G W OE 4.15.5-amd64-preempt-sysrq-20171018 #2 [ 417.643861] Hardware name: LENOVO 20ERCTO1WW/20ERCTO1WW, BIOS N1DET41W (1.15 ) 12/31/2015 [ 417.643870] RIP: 0010:bdevname+0x13/0x1e [ 417.643876] RSP: 0018:ffffa3aa9138fd38 EFLAGS: 00010282 [ 417.643884] RAX: 0000000000000000 RBX: ffff8c8f2f2f8000 RCX: ffffd6701f8 c7edf [ 417.643890] RDX: ffffa3aa9138fd88 RSI: ffffa3aa9138fd88 RDI: 00000000000 00000 [ 417.643895] RBP: ffffa3aa9138fde0 R08: ffffa3aa9138fae8 R09: 00000000000 1850e [ 417.643901] R10: ffff8c8eed34b271 R11: ffff8c8eed34b250 R12: 00000000000 00000 [ 417.643906] R13: ffffd6701f78f940 R14: ffff8c8f38f80000 R15: ffff8c8ea7d 90000 [ 417.643913] FS: 00007fde7e66f500(0000) GS:ffff8c8f61440000(0000) knlGS: 0000000000000000 [ 417.643919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 417.643925] CR2: 0000000000000314 CR3: 00000007e6fa0001 CR4: 00000000003 606e0 [ 417.643931] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 00000000000 00000 [ 417.643938] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 00000000000 00400 [ 417.643946] Call Trace: [ 417.643978] register_bcache+0x1117/0x1270 [bcache] [ 417.643994] ? slab_pre_alloc_hook+0x15/0x3c [ 417.644001] ? slab_post_alloc_hook.isra.44+0xa/0x1a [ 417.644013] ? kernfs_fop_write+0xf6/0x138 [ 417.644020] kernfs_fop_write+0xf6/0x138 [ 417.644031] __vfs_write+0x31/0xcc [ 417.644043] ? current_kernel_time64+0x10/0x36 [ 417.644115] ? __audit_syscall_entry+0xbf/0xe3 [ 417.644124] vfs_write+0xa5/0xe2 [ 417.644133] SyS_write+0x5c/0x9f [ 417.644144] do_syscall_64+0x72/0x81 [ 417.644161] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 417.644169] RIP: 0033:0x7fde7e1c1974 [ 417.644175] RSP: 002b:00007fff13009a38 EFLAGS: 00000246 ORIG_RAX: 0000000 000000001 [ 417.644183] RAX: ffffffffffffffda RBX: 0000000001658280 RCX: 00007fde7e1c 1974 [ 417.644188] RDX: 000000000000000a RSI: 0000000001658280 RDI: 000000000000 0001 [ 417.644193] RBP: 000000000000000a R08: 0000000000000003 R09: 000000000000 0077 [ 417.644198] R10: 000000000000089e R11: 0000000000000246 R12: 000000000000 0001 [ 417.644203] R13: 000000000000000a R14: 7fffffffffffffff R15: 000000000000 0000 [ 417.644213] Code: c7 c2 83 6f ee 98 be 20 00 00 00 48 89 df e8 6c 27 3b 0 0 48 89 d8 5b c3 0f 1f 44 00 00 48 8b 47 70 48 89 f2 48 8b bf 80 00 00 00 <8 b> b0 14 03 00 00 e9 73 ff ff ff 0f 1f 44 00 00 48 8b 47 40 39 [ 417.644302] RIP: bdevname+0x13/0x1e RSP: ffffa3aa9138fd38 [ 417.644306] CR2: 0000000000000314 When registering duplicate cache device in register_cache(), after failure on calling register_cache_set(), bch_cache_release() will be called, then bdev will be freed, so bdevname(bdev, name) caused kernel crash. Since bch_cache_release() will free bdev, so in this patch we make sure bdev being freed if register_cache() fail, and do not free bdev again in register_bcache() when register_cache() fail. Signed-off-by:
Marc MERLIN <marc@merlins.org> Tested-by:
-
Sergey Gorenko authored
commit da343b6d upstream. The value of mr->ndescs greater than mr->max_descs is set in the function mlx5_ib_sg_to_klms() if sg_nents is greater than mr->max_descs. This is an invalid value and it causes the following error when registering mr: mlx5_0:dump_cqe:276:(pid 193): dump error cqe 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 0f 00 78 06 25 00 00 8b 08 1e 8f d3 Cc: <stable@vger.kernel.org> # 4.5 Fixes: b005d316 ("mlx5: Add arbitrary sg list support") Signed-off-by:
Sergey Gorenko <sergeygo@mellanox.com> Tested-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
James Hogan authored
commit 55fe6da9 upstream. cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree FDT (that is, the .dtb file) as binary data in the kernel image. This assembly source contains labels before and after the binary data. The label names incorporate the file name of the corresponding .dtb file. Hyphens are not legal characters in labels, so .dtb files built into the kernel with hyphens in the file name result in errors like the following: bcm3368-netgear-cvg834g.dtb.S: Assembler messages: bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-' bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:' bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:' bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-' Fix this by updating cmd_dt_S_dtb to transform all hyphens from the file name to underscores when constructing the labels. As of v4.16-rc2, 1139 .dts files across ARM64, ARM, MIPS and PowerPC contain hyphens in their names, but the issue only currently manifests on Broadcom MIPS platforms, as that is the only place where such files are built into the kernel. For example when CONFIG_DT_NETGEAR_CVG834G=y, or on BMIPS kernels when the dtbs target is used (in the latter case it admittedly shouldn't really build all the dtb.o files, but thats a separate issue). Fixes: 69583551 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom") Signed-off-by:
James Hogan <jhogan@kernel.org> Reviewed-by:
Frank Rowand <frowand.list@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: <stable@vger.kernel.org> # 4.9+ Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
David Hildenbrand authored
commit f07afa04 upstream. Even if we don't have extended SCA support, we can have more than 64 CPUs if we don't enable any HW features that might use the SCA entries. Now, this works just fine, but we missed a return, which is why we would actually store the SCA entries. If we have more than 64 CPUs, this means writing outside of the basic SCA - bad. Let's fix this. This allows > 64 CPUs when running nested (under vSIE) without random crashes. Fixes: a6940674 ("KVM: s390: allow 255 VCPUs when sca entries aren't used") Reported-by:
Christian Borntraeger <borntraeger@de.ibm.com> Tested-by:
David Hildenbrand <david@redhat.com> Message-Id: <20180306132758.21034-1-david@redhat.com> Cc: stable@vger.kernel.org Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
-
Tiwei Bie authored
commit e82df670 upstream. The vq->vq.num_free hasn't been changed when error happens, so it shouldn't be changed when handling the error. Fixes: 780bc790 ("virtio_ring: Support DMA APIs") Cc: Andy Lutomirski <luto@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Tiwei Bie <tiwei.bie@intel.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Ross Zwisler authored
commit 1d037577 upstream. The following commit: commit aa4d8616 ("block: loop: switch to VFS ITER_BVEC") replaced __do_lo_send_write(), which used ITER_KVEC iterators, with lo_write_bvec() which uses ITER_BVEC iterators. In this change, though, the WRITE flag was lost: - iov_iter_kvec(&from, ITER_KVEC | WRITE, &kvec, 1, len); + iov_iter_bvec(&i, ITER_BVEC, bvec, 1, bvec->bv_len); This flag is necessary for the DAX case because we make decisions based on whether or not the iterator is a READ or a WRITE in dax_iomap_actor() and in dax_iomap_rw(). We end up going through this path in configurations where we combine a PMEM device with 4k sectors, a loopback device and DAX. The consequence of this missed flag is that what we intend as a write actually turns into a read in the DAX code, so no data is ever written. The very simplest test case is to create a loopback device and try and write a small string to it, then hexdump a few bytes of the device to see if the write took. Without this patch you read back all zeros, with this you read back the string you wrote. For XFS this causes us to fail or panic during the following xfstests: xfs/074 xfs/078 xfs/216 xfs/217 xfs/250 For ext4 we have a similar issue where writes never happen, but we don't currently have any xfstests that use loopback and show this issue. Fix this by restoring the WRITE flag argument to iov_iter_bvec(). This causes the xfstests to all pass. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Fixes: commit aa4d8616 ("block: loop: switch to VFS ITER_BVEC") Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
-
Zhang Bo authored
commit ea4f7bd2 upstream. If matrix_keypad_stop() is executing and the keypad interrupt is triggered, disable_row_irqs() may be called by both matrix_keypad_interrupt() and matrix_keypad_stop() at the same time, causing interrupts to be disabled twice and the keypad being "stuck" after resuming. Take lock when setting keypad->stopped to ensure that ISR will not race with matrix_keypad_stop() disabling interrupts. Signed-off-by:
Zhang Bo <zbsdta@126.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Colin Ian King authored
commit 902f4d06 upstream. The allocation of host_data is not null checked, leading to a null pointer dereference if the allocation fails. Fix this by adding a null check and return with -ENOMEM. Fixes: 64b139f9 ("MIPS: OCTEON: irq: add CIB and other fixes") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
David Daney <david.daney@cavium.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Steven J. Hill" <Steven.Hill@cavium.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.0+ Patchwork: https://patchwork.linux-mips.org/patch/18658/Signed-off-by:
-
Colin Ian King authored
commit 1b22b4b2 upstream. Currently there is no null check on a failed allocation of board_data, and hence a null pointer dereference will occurr. Fix this by checking for the out of memory null pointer. Fixes: a7473717 ("MIPS: ath25: add board configuration detection") Signed-off-by:
-
Justin Chen authored
commit 06a3f0c9 upstream. Commit a3e6c1ef ("MIPS: IRQ: Fix disable_irq on CPU IRQs") fixes an issue where disable_irq did not actually disable the irq. The bug caused our IPIs to not be disabled, which actually is the correct behavior. With the addition of commit a3e6c1ef ("MIPS: IRQ: Fix disable_irq on CPU IRQs"), the IPIs were getting disabled going into suspend, thus schedule_ipi() was not being called. This caused deadlocks where schedulable task were not being scheduled and other cpus were waiting for them to do something. Add the IRQF_NO_SUSPEND flag so an irq_disable will not be called on the IPIs during suspend. Signed-off-by:
Justin Chen <justinpopo6@gmail.com> Fixes: a3e6c1ef ("MIPS: IRQ: Fix disabled_irq on CPU IRQs") Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17385/ [jhogan@kernel.org: checkpatch: wrap long lines and fix commit refs] Signed-off-by:
-
James Zhu authored
commit f8bee613 upstream. When UVD is in VM mode, there is not uvd handle exchanged, uvd.handles are always 0. So vcpu_bo always need save, Otherwise amdgpu driver will fail during suspend/resume. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105021Signed-off-by:
James Zhu <James.Zhu@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
James Zhu authored
commit 0e5ee33d upstream. Max uvd handles should use adev->uvd.max_handles instead of AMDGPU_MAX_UVD_HANDLES here. Signed-off-by:
-
Alex Deucher authored
commit 545b0bcd upstream. Always set the graphics values to the max for the asic type. E.g., some 1 RB chips are actually 1 RB chips, others are actually harvested 2 RB chips. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99353Reviewed-by:
-
Alex Deucher authored
commit 0b58d90f upstream. Always set the graphics values to the max for the asic type. E.g., some 1 RB chips are actually 1 RB chips, others are actually harvested 2 RB chips. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99353Reviewed-by:
-
Rex Zhu authored
commit 1bced75f upstream. it is required if a platform supports PCIe root complex core voltage reduction. After receiving this notification, SBIOS can apply default PCIe root complex power policy. Reviewed-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
-
Lukas Wunner authored
commit aa0aad57 upstream. amdgpu's ->runtime_suspend hook calls drm_kms_helper_poll_disable(), which waits for the output poll worker to finish if it's running. The output poll worker meanwhile calls pm_runtime_get_sync() in amdgpu's ->detect hooks, which waits for the ongoing suspend to finish, causing a deadlock. Fix by not acquiring a runtime PM ref if the ->detect hooks are called in the output poll worker's context. This is safe because the poll worker is only enabled while runtime active and we know that ->runtime_suspend waits for it to finish. Fixes: d38ceaf9 ("drm/amdgpu: add core driver (v4)") Cc: stable@vger.kernel.org # v4.2+: 27d4ee03: workqueue: Allow retrieval of current task's work struct Cc: stable@vger.kernel.org # v4.2+: 25c058cc: drm: Allow determining if current task is output poll worker Cc: Alex Deucher <alexander.deucher@amd.com> Tested-by:
Mike Lothian <mike@fireburn.co.uk> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Link: https://patchwork.freedesktop.org/patch/msgid/4c9bf72aacae1eef062bd134cd112e0770a7f121.1518338789.git.lukas@wunner.deSigned-off-by:
-
Lukas Wunner authored
commit 15734fef upstream. radeon's ->runtime_suspend hook calls drm_kms_helper_poll_disable(), which waits for the output poll worker to finish if it's running. The output poll worker meanwhile calls pm_runtime_get_sync() in radeon's ->detect hooks, which waits for the ongoing suspend to finish, causing a deadlock. Fix by not acquiring a runtime PM ref if the ->detect hooks are called in the output poll worker's context. This is safe because the poll worker is only enabled while runtime active and we know that ->runtime_suspend waits for it to finish. Stack trace for posterity: INFO: task kworker/0:3:31847 blocked for more than 120 seconds Workqueue: events output_poll_execute [drm_kms_helper] Call Trace: schedule+0x3c/0x90 rpm_resume+0x1e2/0x690 __pm_runtime_resume+0x3f/0x60 radeon_lvds_detect+0x39/0xf0 [radeon] output_poll_execute+0xda/0x1e0 [drm_kms_helper] process_one_work+0x14b/0x440 worker_thread+0x48/0x4a0 INFO: task kworker/2:0:10493 blocked for more than 120 seconds. Workqueue: pm pm_runtime_work Call Trace: schedule+0x3c/0x90 schedule_timeout+0x1b3/0x240 wait_for_common+0xc2/0x180 wait_for_completion+0x1d/0x20 flush_work+0xfc/0x1a0 __cancel_work_timer+0xa5/0x1d0 cancel_delayed_work_sync+0x13/0x20 drm_kms_helper_poll_disable+0x1f/0x30 [drm_kms_helper] radeon_pmops_runtime_suspend+0x3d/0xa0 [radeon] pci_pm_runtime_suspend+0x61/0x1a0 vga_switcheroo_runtime_suspend+0x21/0x70 __rpm_callback+0x32/0x70 rpm_callback+0x24/0x80 rpm_suspend+0x12b/0x640 pm_runtime_work+0x6f/0xb0 process_one_work+0x14b/0x440 worker_thread+0x48/0x4a0 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94147 Fixes: 10ebc0bc ("drm/radeon: add runtime PM support (v2)") Cc: stable@vger.kernel.org # v3.13+: 27d4ee03: workqueue: Allow retrieval of current task's work struct Cc: stable@vger.kernel.org # v3.13+: 25c058cc: drm: Allow determining if current task is output poll worker Cc: Ismo Toijala <ismo.toijala@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by:
-
Lukas Wunner authored
commit d61a5c10 upstream. nouveau's ->runtime_suspend hook calls drm_kms_helper_poll_disable(), which waits for the output poll worker to finish if it's running. The output poll worker meanwhile calls pm_runtime_get_sync() in nouveau_connector_detect() which waits for the ongoing suspend to finish, causing a deadlock. Fix by not acquiring a runtime PM ref if nouveau_connector_detect() is called in the output poll worker's context. This is safe because the poll worker is only enabled while runtime active and we know that ->runtime_suspend waits for it to finish. Other contexts calling nouveau_connector_detect() do require a runtime PM ref, these comprise: status_store() drm sysfs interface ->fill_modes drm callback drm_fb_helper_probe_connector_modes() drm_mode_getconnector() nouveau_connector_hotplug() nouveau_display_hpd_work() nv17_tv_set_property() Stack trace for posterity: INFO: task kworker/0:1:58 blocked for more than 120 seconds. Workqueue: events output_poll_execute [drm_kms_helper] Call Trace: schedule+0x28/0x80 rpm_resume+0x107/0x6e0 __pm_runtime_resume+0x47/0x70 nouveau_connector_detect+0x7e/0x4a0 [nouveau] nouveau_connector_detect_lvds+0x132/0x180 [nouveau] drm_helper_probe_detect_ctx+0x85/0xd0 [drm_kms_helper] output_poll_execute+0x11e/0x1c0 [drm_kms_helper] process_one_work+0x184/0x380 worker_thread+0x2e/0x390 INFO: task kworker/0:2:252 blocked for more than 120 seconds. Workqueue: pm pm_runtime_work Call Trace: schedule+0x28/0x80 schedule_timeout+0x1e3/0x370 wait_for_completion+0x123/0x190 flush_work+0x142/0x1c0 nouveau_pmops_runtime_suspend+0x7e/0xd0 [nouveau] pci_pm_runtime_suspend+0x5c/0x180 vga_switcheroo_runtime_suspend+0x1e/0xa0 __rpm_callback+0xc1/0x200 rpm_callback+0x1f/0x70 rpm_suspend+0x13c/0x640 pm_runtime_work+0x6e/0x90 process_one_work+0x184/0x380 worker_thread+0x2e/0x390 Bugzilla: https://bugs.archlinux.org/task/53497 Bugzilla: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=870523 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70388#c33 Fixes: 5addcf0a ("nouveau: add runtime PM support (v0.9)") Cc: stable@vger.kernel.org # v3.12+: 27d4ee03: workqueue: Allow retrieval of current task's work struct Cc: stable@vger.kernel.org # v3.12+: 25c058cc: drm: Allow determining if current task is output poll worker Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by:
-
Lukas Wunner authored
commit 25c058cc upstream. Introduce a helper to determine if the current task is an output poll worker. This allows us to fix a long-standing deadlock in several DRM drivers wherein the ->runtime_suspend callback waits for the output poll worker to finish and the worker in turn calls a ->detect callback which waits for runtime suspend to finish. The ->detect callback is invoked from multiple call sites and waiting for runtime suspend to finish is the correct thing to do except if it's executing in the context of the worker. v2: Expand kerneldoc to specifically mention deadlock between output poll worker and autosuspend worker as use case. (Lyude) Cc: Dave Airlie <airlied@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
-
Lukas Wunner authored
commit 27d4ee03 upstream. Introduce a helper to retrieve the current task's work struct if it is a workqueue worker. This allows us to fix a long-standing deadlock in several DRM drivers wherein the ->runtime_suspend callback waits for a specific worker to finish and that worker in turn calls a function which waits for runtime suspend to finish. That function is invoked from multiple call sites and waiting for runtime suspend to finish is the correct thing to do except if it's executing in the context of the worker. Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Acked-by:
Tejun Heo <tj@kernel.org> Reviewed-by:
-
Maarten Lankhorst authored
commit d13a8479 upstream. intel_power_domains_init_hw() calls set_init_power, but when using runtime power management this call is skipped. This prevents hw readout from taking place. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104172 Link: https://patchwork.freedesktop.org/patch/msgid/20180116155324.75120-1-maarten.lankhorst@linux.intel.com Fixes: bc87229f ("drm/i915/skl: enable PC9/10 power states during suspend-to-idle") Cc: Nivedita Swaminathan <nivedita.swaminathan@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: <stable@vger.kernel.org> # v4.5+ Reviewed-by:
Imre Deak <imre.deak@intel.com> (cherry picked from commit ac25dfed) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
himanshu.madhani@cavium.com authored
commit 1514839b upstream. This patch fixes NULL pointer crash due to active timer running for abort IOCB. From crash dump analysis it was discoverd that get_next_timer_interrupt() encountered a corrupted entry on the timer list. #9 [ffff95e1f6f0fd40] page_fault at ffffffff914fe8f8 [exception RIP: get_next_timer_interrupt+440] RIP: ffffffff90ea3088 RSP: ffff95e1f6f0fdf0 RFLAGS: 00010013 RAX: ffff95e1f6451028 RBX: 000218e2389e5f40 RCX: 00000001232ad600 RDX: 0000000000000001 RSI: ffff95e1f6f0fdf0 RDI: 0000000001232ad6 RBP: ffff95e1f6f0fe40 R8: ffff95e1f6451188 R9: 0000000000000001 R10: 0000000000000016 R11: 0000000000000016 R12: 00000001232ad5f6 R13: ffff95e1f6450000 R14: ffff95e1f6f0fdf8 R15: ffff95e1f6f0fe10 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Looking at the assembly of get_next_timer_interrupt(), address came from %r8 (ffff95e1f6451188) which is pointing to list_head with single entry at ffff95e5ff621178. 0xffffffff90ea307a <get_next_timer_interrupt+426>: mov (%r8),%rdx 0xffffffff90ea307d <get_next_timer_interrupt+429>: cmp %r8,%rdx 0xffffffff90ea3080 <get_next_timer_interrupt+432>: je 0xffffffff90ea30a7 <get_next_timer_interrupt+471> 0xffffffff90ea3082 <get_next_timer_interrupt+434>: nopw 0x0(%rax,%rax,1) 0xffffffff90ea3088 <get_next_timer_interrupt+440>: testb $0x1,0x18(%rdx) crash> rd ffff95e1f6451188 10 ffff95e1f6451188: ffff95e5ff621178 ffff95e5ff621178 x.b.....x.b..... ffff95e1f6451198: ffff95e1f6451198 ffff95e1f6451198 ..E.......E..... ffff95e1f64511a8: ffff95e1f64511a8 ffff95e1f64511a8 ..E.......E..... ffff95e1f64511b8: ffff95e77cf509a0 ffff95e77cf509a0 ...|.......|.... ffff95e1f64511c8: ffff95e1f64511c8 ffff95e1f64511c8 ..E.......E..... crash> rd ffff95e5ff621178 10 ffff95e5ff621178: 0000000000000001 ffff95e15936aa00 ..........6Y.... ffff95e5ff621188: 0000000000000000 00000000ffffffff ................ ffff95e5ff621198: 00000000000000a0 0000000000000010 ................ ffff95e5ff6211a8: ffff95e5ff621198 000000000000000c ..b............. ffff95e5ff6211b8: 00000f5800000000 ffff95e751f8d720 ....X... ..Q.... ffff95e5ff621178 belongs to freed mempool object at ffff95e5ff621080. CACHE NAME OBJSIZE ALLOCATED TOTAL SLABS SSIZE ffff95dc7fd74d00 mnt_cache 384 19785 24948 594 16k SLAB MEMORY NODE TOTAL ALLOCATED FREE ffffdc5dabfd8800 ffff95e5ff620000 1 42 29 13 FREE / [ALLOCATED] ffff95e5ff621080 (cpu 6 cache) Examining the contents of that memory reveals a pointer to a constant string in the driver, "abort\0", which is set by qla24xx_async_abort_cmd(). crash> rd ffffffffc059277c 20 ffffffffc059277c: 6e490074726f6261 0074707572726574 abort.Interrupt. ffffffffc059278c: 00676e696c6c6f50 6920726576697244 Polling.Driver i ffffffffc059279c: 646f6d207325206e 6974736554000a65 n %s mode..Testi ffffffffc05927ac: 636976656420676e 786c252074612065 ng device at %lx ffffffffc05927bc: 6b63656843000a2e 646f727020676e69 ...Checking prod ffffffffc05927cc: 6f20444920746375 0a2e706968632066 uct ID of chip.. ffffffffc05927dc: 5120646e756f4600 204130303232414c .Found QLA2200A ffffffffc05927ec: 43000a2e70696843 20676e696b636568 Chip...Checking ffffffffc05927fc: 65786f626c69616d 6c636e69000a2e73 mailboxes...incl ffffffffc059280c: 756e696c2f656475 616d2d616d642f78 ude/linux/dma-ma crash> struct -ox srb_iocb struct srb_iocb { union { struct {...} logio; struct {...} els_logo; struct {...} tmf; struct {...} fxiocb; struct {...} abt; struct ct_arg ctarg; struct {...} mbx; struct {...} nack; [0x0 ] } u; [0xb8] struct timer_list timer; [0x108] void (*timeout)(void *); } SIZE: 0x110 crash> ! bc ibase=16 obase=10 B8+40 F8 The object is a srb_t, and at offset 0xf8 within that structure (i.e. ffff95e5ff621080 + f8 -> ffff95e5ff621178) is a struct timer_list. Cc: <stable@vger.kernel.org> #4.4+ Fixes: 4440e46d ("[SCSI] qla2xxx: Add IOCB Abort command asynchronous handling.") Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Stefan Brüns authored
commit 90024a59 upstream. The ACK/NACK implementation as found in e.g. the G965 has the falling clock edge and the release of the data line after the ACK for the received byte happen at the same time. This is conformant with the I2C specification, which allows a zero hold time, see footnote [3]: "A device must internally provide a hold time of at least 300 ns for the SDA signal (with respect to the V IH(min) of the SCL signal) to bridge the undefined region of the falling edge of SCL." Some HDMI-to-VGA converters apparently fail to adhere to this requirement and latch SDA at the falling clock edge, so instead of an ACK sometimes a NACK is read and the slave (i.e. the EDID ROM) ends the transfer. The bitbanging releases the data line for the ACK only 1/4 bit time after the falling clock edge, so a slave will see the correct value no matter if it samples at the rising or the falling clock edge or in the center. Fallback to bitbanging is already done for the CRT connector. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92685Signed-off-by:
Stefan Brüns <stefan.bruens@rwth-aachen.de> Cc: stable@vger.kernel.org Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/a39f080b-81a5-4c93-b3f7-7cb0a58daca3@rwthex-w2-a.rwth-ad.de (cherry picked from commit cfb926e1) Signed-off-by:
-
Leon Romanovsky authored
commit 28e9091e upstream. The user can provide very large cqe_size which will cause to integer overflow as it can be seen in the following UBSAN warning: ======================================================================= UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/cq.c:1192:53 signed integer overflow: 64870 * 65536 cannot be represented in type 'int' CPU: 0 PID: 267 Comm: syzkaller605279 Not tainted 4.15.0+ #90 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ? dma_virt_map_sg+0x22c/0x22c ubsan_epilogue+0xe/0x81 handle_overflow+0x1f3/0x251 ? __ubsan_handle_negate_overflow+0x19b/0x19b ? lock_acquire+0x440/0x440 mlx5_ib_resize_cq+0x17e7/0x1e40 ? cyc2ns_read_end+0x10/0x10 ? native_read_msr_safe+0x6c/0x9b ? cyc2ns_read_end+0x10/0x10 ? mlx5_ib_modify_cq+0x220/0x220 ? sched_clock_cpu+0x18/0x200 ? lookup_get_idr_uobject+0x200/0x200 ? rdma_lookup_get_uobject+0x145/0x2f0 ib_uverbs_resize_cq+0x207/0x3e0 ? ib_uverbs_ex_create_cq+0x250/0x250 ib_uverbs_write+0x7f9/0xef0 ? cyc2ns_read_end+0x10/0x10 ? print_irqtrace_events+0x280/0x280 ? ib_uverbs_ex_create_cq+0x250/0x250 ? uverbs_devnode+0x110/0x110 ? sched_clock_cpu+0x18/0x200 ? do_raw_spin_trylock+0x100/0x100 ? __lru_cache_add+0x16e/0x290 __vfs_write+0x10d/0x700 ? uverbs_devnode+0x110/0x110 ? kernel_read+0x170/0x170 ? sched_clock_cpu+0x18/0x200 ? security_file_permission+0x93/0x260 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x1e/0x8b RIP: 0033:0x433549 RSP: 002b:00007ffe63bd1ea8 EFLAGS: 00000217 ======================================================================= Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 3.13 Fixes: bde51583 ("IB/mlx5: Add support for resize CQ") Reported-by:
Noa Osherovich <noaos@mellanox.com> Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Leon Romanovsky authored
commit a5880b84 upstream. The QP state is limited and declared in enum ib_qp_state, but ucma user was able to supply any possible (u32) value. Reported-by: syzbot+0df1ab766f8924b1edba@syzkaller.appspotmail.com Fixes: 75216638 ("RDMA/cma: Export rdma cm interface to userspace") Signed-off-by:
-
Leon Romanovsky authored
commit 6a21dfc0 upstream. Users of ucma are supposed to provide size of option level, in most paths it is supposed to be equal to u8 or u16, but it is not the case for the IB path record, where it can be multiple of struct ib_path_rec_data. This patch takes simplest possible approach and prevents providing values more than possible to allocate. Reported-by: syzbot+a38b0e9f694c379ca7ce@syzkaller.appspotmail.com Fixes: 7ce86409 ("RDMA/ucma: Allow user space to set service type") Signed-off-by:
-
- 11 Mar, 2018 13 commits
-
-
Greg Kroah-Hartman authored
-
Ernesto A. Fernández authored
commit d7d82496 upstream. When changing a file's acl mask, btrfs_set_acl() will first set the group bits of i_mode to the value of the mask, and only then set the actual extended attribute representing the new acl. If the second part fails (due to lack of space, for example) and the file had no acl attribute to begin with, the system will from now on assume that the mask permission bits are actual group permission bits, potentially granting access to the wrong users. Prevent this by restoring the original mode bits if __btrfs_set_acl fails. Signed-off-by:
Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
Daniel Borkmann authored
[ upstream commit d269176e ] While working on 16338a9b ("bpf, arm64: fix out of bounds access in tail call") I noticed that ppc64 JIT is partially affected as well. While the bound checking is correctly performed as unsigned comparison, the register with the index value however, is never truncated into 32 bit space, so e.g. a index value of 0x100000000ULL with a map of 1 element would pass with PPC_CMPLW() whereas we later on continue with the full 64 bit register value. Therefore, as we do in interpreter and other JITs truncate the value to 32 bit initially in order to fix access. Fixes: ce076141 ("powerpc/bpf: Implement support for tail calls") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Tested-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Eric Dumazet authored
[ upstream commit 32fff239 ] syszbot managed to trigger RCU detected stalls in bpf_array_free_percpu() It takes time to allocate a huge percpu map, but even more time to free it. Since we run in process context, use cond_resched() to yield cpu if needed. Fixes: a10423b8 ("bpf: introduce BPF_MAP_TYPE_PERCPU_ARRAY map") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Daniel Borkmann authored
[ upstream commit 16338a9b ] I recently noticed a crash on arm64 when feeding a bogus index into BPF tail call helper. The crash would not occur when the interpreter is used, but only in case of JIT. Output looks as follows: [ 347.007486] Unable to handle kernel paging request at virtual address fffb850e96492510 [...] [ 347.043065] [fffb850e96492510] address between user and kernel address ranges [ 347.050205] Internal error: Oops: 96000004 [#1] SMP [...] [ 347.190829] x13: 0000000000000000 x12: 0000000000000000 [ 347.196128] x11: fffc047ebe782800 x10: ffff808fd7d0fd10 [ 347.201427] x9 : 0000000000000000 x8 : 0000000000000000 [ 347.206726] x7 : 0000000000000000 x6 : 001c991738000000 [ 347.212025] x5 : 0000000000000018 x4 : 000000000000ba5a [ 347.217325] x3 : 00000000000329c4 x2 : ffff808fd7cf0500 [ 347.222625] x1 : ffff808fd7d0fc00 x0 : ffff808fd7cf0500 [ 347.227926] Process test_verifier (pid: 4548, stack limit = 0x000000007467fa61) [ 347.235221] Call trace: [ 347.237656] 0xffff000002f3a4fc [ 347.240784] bpf_test_run+0x78/0xf8 [ 347.244260] bpf_prog_test_run_skb+0x148/0x230 [ 347.248694] SyS_bpf+0x77c/0x1110 [ 347.251999] el0_svc_naked+0x30/0x34 [ 347.255564] Code: 9100075a d280220a 8b0a002a d37df04b (f86b694b) [...] In this case the index used in BPF r3 is the same as in r1 at the time of the call, meaning we fed a pointer as index; here, it had the value 0xffff808fd7cf0500 which sits in x2. While I found tail calls to be working in general (also for hitting the error cases), I noticed the following in the code emission: # bpftool p d j i 988 [...] 38: ldr w10, [x1,x10] 3c: cmp w2, w10 40: b.ge 0x000000000000007c <-- signed cmp 44: mov x10, #0x20 // #32 48: cmp x26, x10 4c: b.gt 0x000000000000007c 50: add x26, x26, #0x1 54: mov x10, #0x110 // #272 58: add x10, x1, x10 5c: lsl x11, x2, #3 60: ldr x11, [x10,x11] <-- faulting insn (f86b694b) 64: cbz x11, 0x000000000000007c [...] Meaning, the tests passed because commit ddb55992 ("arm64: bpf: implement bpf_tail_call() helper") was using signed compares instead of unsigned which as a result had the test wrongly passing. Change this but also the tail call count test both into unsigned and cap the index as u32. Latter we did as well in 90caccdd ("bpf: fix bpf_tail_call() x64 JIT") and is needed in addition here, too. Tested on HiSilicon Hi1616. Result after patch: # bpftool p d j i 268 [...] 38: ldr w10, [x1,x10] 3c: add w2, w2, #0x0 40: cmp w2, w10 44: b.cs 0x0000000000000080 48: mov x10, #0x20 // #32 4c: cmp x26, x10 50: b.hi 0x0000000000000080 54: add x26, x26, #0x1 58: mov x10, #0x110 // #272 5c: add x10, x1, x10 60: lsl x11, x2, #3 64: ldr x11, [x10,x11] 68: cbz x11, 0x0000000000000080 [...] Fixes: ddb55992 ("arm64: bpf: implement bpf_tail_call() helper") Signed-off-by:
-
Daniel Borkmann authored
[ upstream commit a493a87f ] Implement a retpoline [0] for the BPF tail call JIT'ing that converts the indirect jump via jmp %rax that is used to make the long jump into another JITed BPF image. Since this is subject to speculative execution, we need to control the transient instruction sequence here as well when CONFIG_RETPOLINE is set, and direct it into a pause + lfence loop. The latter aligns also with what gcc / clang emits (e.g. [1]). JIT dump after patch: # bpftool p d x i 1 0: (18) r2 = map[id:1] 2: (b7) r3 = 0 3: (85) call bpf_tail_call#12 4: (b7) r0 = 2 5: (95) exit With CONFIG_RETPOLINE: # bpftool p d j i 1 [...] 33: cmp %edx,0x24(%rsi) 36: jbe 0x0000000000000072 |* 38: mov 0x24(%rbp),%eax 3e: cmp $0x20,%eax 41: ja 0x0000000000000072 | 43: add $0x1,%eax 46: mov %eax,0x24(%rbp) 4c: mov 0x90(%rsi,%rdx,8),%rax 54: test %rax,%rax 57: je 0x0000000000000072 | 59: mov 0x28(%rax),%rax 5d: add $0x25,%rax 61: callq 0x000000000000006d |+ 66: pause | 68: lfence | 6b: jmp 0x0000000000000066 | 6d: mov %rax,(%rsp) | 71: retq | 72: mov $0x2,%eax [...] * relative fall-through jumps in error case + retpoline for indirect jump Without CONFIG_RETPOLINE: # bpftool p d j i 1 [...] 33: cmp %edx,0x24(%rsi) 36: jbe 0x0000000000000063 |* 38: mov 0x24(%rbp),%eax 3e: cmp $0x20,%eax 41: ja 0x0000000000000063 | 43: add $0x1,%eax 46: mov %eax,0x24(%rbp) 4c: mov 0x90(%rsi,%rdx,8),%rax 54: test %rax,%rax 57: je 0x0000000000000063 | 59: mov 0x28(%rax),%rax 5d: add $0x25,%rax 61: jmpq *%rax |- 63: mov $0x2,%eax [...] * relative fall-through jumps in error case - plain indirect jump as before [0] https://support.google.com/faqs/answer/7625886 [1] https://github.com/gcc-mirror/gcc/commit/a31e654fa107be968b802786d747e962c2fcdb2bSigned-off-by:
-
Daniel Borkmann authored
[ upstream commit 9c2d63b8 ] syzkaller recently triggered OOM during percpu map allocation; while there is work in progress by Dennis Zhou to add __GFP_NORETRY semantics for percpu allocator under pressure, there seems also a missing bpf_map_precharge_memlock() check in array map allocation. Given today the actual bpf_map_charge_memlock() happens after the find_and_alloc_map() in syscall path, the bpf_map_precharge_memlock() is there to bail out early before we go and do the map setup work when we find that we hit the limits anyway. Therefore add this for array map as well. Fixes: 6c905981 ("bpf: pre-allocate hash map elements") Fixes: a10423b8 ("bpf: introduce BPF_MAP_TYPE_PERCPU_ARRAY map") Reported-by: syzbot+adb03f3f0bb57ce3acda@syzkaller.appspotmail.com Signed-off-by:
-
Daniel Borkmann authored
[ upstream commit a316338c ] trie_alloc() always needs to have BPF_F_NO_PREALLOC passed in via attr->map_flags, since it does not support preallocation yet. We check the flag, but we never copy the flag into trie->map.map_flags, which is later on exposed into fdinfo and used by loaders such as iproute2. Latter uses this in bpf_map_selfcheck_pinned() to test whether a pinned map has the same spec as the one from the BPF obj file and if not, bails out, which is currently the case for lpm since it exposes always 0 as flags. Also copy over flags in array_map_alloc() and stack_map_alloc(). They always have to be 0 right now, but we should make sure to not miss to copy them over at a later point in time when we add actual flags for them to use. Fixes: b95a5c4d ("bpf: add a longest prefix match trie map implementation") Reported-by:
Jarno Rajahalme <jarno@covalent.io> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dan Williams authored
commit 3968523f upstream. mpls_label_ok() validates that the 'platform_label' array index from a userspace netlink message payload is valid. Under speculation the mpls_label_ok() result may not resolve in the CPU pipeline until after the index is used to access an array element. Sanitize the index to zero to prevent userspace-controlled arbitrary out-of-bounds speculation, a precursor for a speculative execution side channel vulnerability. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
David Ahern authored
commit b7b386f4 upstream. mpls_route_add and mpls_route_del have the same checks on the label. Move to a helper. Avoid duplicate extack messages in the next patch. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Alexey Kodanev authored
[ Upstream commit 07f2c7ab ] When SCTP makes INIT or INIT_ACK packet the total chunk length can exceed SCTP_MAX_CHUNK_LEN which leads to kernel panic when transmitting these packets, e.g. the crash on sending INIT_ACK: [ 597.804948] skbuff: skb_over_panic: text:00000000ffae06e4 len:120168 put:120156 head:000000007aa47635 data:00000000d991c2de tail:0x1d640 end:0xfec0 dev:<NULL> ... [ 597.976970] ------------[ cut here ]------------ [ 598.033408] kernel BUG at net/core/skbuff.c:104! [ 600.314841] Call Trace: [ 600.345829] <IRQ> [ 600.371639] ? sctp_packet_transmit+0x2095/0x26d0 [sctp] [ 600.436934] skb_put+0x16c/0x200 [ 600.477295] sctp_packet_transmit+0x2095/0x26d0 [sctp] [ 600.540630] ? sctp_packet_config+0x890/0x890 [sctp] [ 600.601781] ? __sctp_packet_append_chunk+0x3b4/0xd00 [sctp] [ 600.671356] ? sctp_cmp_addr_exact+0x3f/0x90 [sctp] [ 600.731482] sctp_outq_flush+0x663/0x30d0 [sctp] [ 600.788565] ? sctp_make_init+0xbf0/0xbf0 [sctp] [ 600.845555] ? sctp_check_transmitted+0x18f0/0x18f0 [sctp] [ 600.912945] ? sctp_outq_tail+0x631/0x9d0 [sctp] [ 600.969936] sctp_cmd_interpreter.isra.22+0x3be1/0x5cb0 [sctp] [ 601.041593] ? sctp_sf_do_5_1B_init+0x85f/0xc30 [sctp] [ 601.104837] ? sctp_generate_t1_cookie_event+0x20/0x20 [sctp] [ 601.175436] ? sctp_eat_data+0x1710/0x1710 [sctp] [ 601.233575] sctp_do_sm+0x182/0x560 [sctp] [ 601.284328] ? sctp_has_association+0x70/0x70 [sctp] [ 601.345586] ? sctp_rcv+0xef4/0x32f0 [sctp] [ 601.397478] ? sctp6_rcv+0xa/0x20 [sctp] ... Here the chunk size for INIT_ACK packet becomes too big, mostly because of the state cookie (INIT packet has large size with many address parameters), plus additional server parameters. Later this chunk causes the panic in skb_put_data(): skb_packet_transmit() sctp_packet_pack() skb_put_data(nskb, chunk->skb->data, chunk->skb->len); 'nskb' (head skb) was previously allocated with packet->size from u16 'chunk->chunk_hdr->length'. As suggested by Marcelo we should check the chunk's length in _sctp_make_chunk() before trying to allocate skb for it and discard a chunk if its size bigger than SCTP_MAX_CHUNK_LEN. Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leinter@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Julian Wiedmann authored
[ Upstream commit d22ffb5a ] If multiple IPA commands are build & sent out concurrently, fill_ipacmd_header() may assign a seqno value to a command that's different from what send_control_data() later assigns to this command's reply. This is due to other commands passing through send_control_data(), and incrementing card->seqno.ipa along the way. So one IPA command has no reply that's waiting for its seqno, while some other IPA command has multiple reply objects waiting for it. Only one of those waiting replies wins, and the other(s) times out and triggers a recovery via send_ipa_cmd(). Fix this by making sure that the same seqno value is assigned to a command and its reply object. Do so immediately before submitting the command & while holding the irq_pending "lock", to produce nicely ascending seqnos. As a side effect, *all* IPA commands now use a reply object that's waiting for its actual seqno. Previously, early IPA commands that were submitted while the card was still DOWN used the "catch-all" IDX seqno. Signed-off-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
[ Upstream commit c5c48c58 ] Current code ("qeth_l3_ip_from_hash()") matches a queried address object against objects in the IP table by IP address, Mask/Prefix Length and MAC address ("qeth_l3_ipaddrs_is_equal()"). But what callers actually require is either a) "is this IP address registered" (ie. match by IP address only), before adding a new address. b) or "is this address object registered" (ie. match all relevant attributes), before deleting an address. Right now 1. the ADD path is too strict in its lookup, and eg. doesn't detect conflicts between an existing NORMAL address and a new VIPA address (because the NORMAL address will have mask != 0, while VIPA has a mask == 0), 2. the DELETE path is not strict enough, and eg. allows del_rxip() to delete a VIPA address as long as the IP address matches. Fix all this by adding helpers (_addr_match_ip() and _addr_match_all()) that do the appropriate checking. Note that the ADD path for NORMAL addresses is special, as qeth keeps track of how many times such an address is in use (and there is no immediate way of returning errors to the caller). So when a requested NORMAL address _fully_ matches an existing one, it's not considered a conflict and we merely increment the refcount. Fixes: 5f78e29c ("qeth: optimize IP handling in rx_mode callback") Signed-off-by:
-
