There are reports that since version 6.7 update-grub fails to find the
device of the root on systems without initrd and on a single device.

This looks like the device name changed in the output of
/proc/self/mountinfo:

6.5-rc5 working

  18 1 0:16 / / rw,noatime - btrfs /dev/sda8 ...

6.7 not working:

  17 1 0:15 / / rw,noatime - btrfs /dev/root ...

and "update-grub" shows this error:

  /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?)

This looks like it's related to the device name, but grub-probe
recognizes the "/dev/root" path and tries to find the underlying device.
However there's a special case for some filesystems, for btrfs in
particular.

The generic root device detection heuristic is not done and it all
relies on reading the device infos by a btrfs specific ioctl. This ioctl
returns the device name as it was saved at the time of device scan (in
this case it's /dev/root).

The change in 6.7 for temp_fsid to allow several single device
filesystem to exist with the same fsid (and transparently generate a new
UUID at mount time) was to skip caching/registering such devices.

This also skipped mounted device. One step of scanning is to check if
the device name hasn't changed, and if yes then update the cached value.

This broke the grub-probe as it always read the device /dev/root and
couldn't find it in the system. A temporary workaround is to create a
symlink but this does not survive reboot.

The right fix is to allow updating the device path of a mounted
filesystem even if this is a single device one.

In the fix, check if the device's major:minor number matches with the
cached device. If they do, then we can allow the scan to happen so that
device_list_add() can take care of updating the device path. The file
descriptor remains unchanged.

This does not affect the temp_fsid feature, the UUID of the mounted
filesystem remains the same and the matching is based on device major:minor
which is unique per mounted filesystem.

This covers the path when the device (that exists for all mounted
devices) name changes, updating /dev/root to /dev/sdx. Any other single
device with filesystem and is not mounted is still skipped.

Note that if a system is booted and initial mount is done on the
/dev/root device, this will be the cached name of the device. Only after
the command "btrfs device scan" it will change as it triggers the
rename.

The fix was verified by users whose systems were affected.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=218353
Link: https://lore.kernel.org/lkml/CAKLYgeJ1tUuqLcsquwuFqjDXPSJpEiokrWK2gisPKDZLs8Y2TQ@mail.gmail.com/
Fixes: bc27d6f0 ("btrfs: scan but don't register device on single device filesystem")
CC: stable@vger.kernel.org # 6.7+
Tested-by: Alex Romosan <aromosan@gmail.com>
Tested-by: CHECK_1234543212345@protonmail.com
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Pull btrfs updates from David Sterba:
 "Mostly stabilization, refactoring and cleanup changes. There rest are
  minor performance optimizations due to caching or lock contention
  reduction and a few notable fixes.

  Performance improvements:

   - minor speedup in logging when repeatedly allocated structure is
     preallocated only once, improves latency and decreases lock
     contention

   - minor throughput increase (+6%), reduced lock contention after
     clearing delayed allocation bits, applies to several common
     workload types

   - skip full quota rescan if a new relation is added in the same
     transaction

  Fixes:

   - zstd fix for inline compressed file in subpage mode, updated
     version from the 6.8 time

   - proper qgroup inheritance ioctl parameter validation

   - more fiemap followup fixes after reduced locking done in 6.8:
      - fix race when detecting delalloc ranges

  Core changes:

   - more debugging code:
      - added assertions for a very rare crash in raid56 calculation
      - tree-checker dumps page state to give more insights into
        possible reference counting issues

   - add checksum calculation offloading sysfs knob, for now enabled
     under DEBUG only to determine a good heuristic for deciding the
     offload or synchronous, depends on various factors (block group
     profile, device speed) and is not as clear as initially thought
     (checksum type)

   - error handling improvements, added assertions

   - more page to folio conversion (defrag, truncate), cached size and
     shift

   - preparation for more fine grained locking of sectors in subpage
     mode

   - cleanups and refactoring:
      - include cleanups, forward declarations
      - pointer-to-structure helpers
      - redundant argument removals
      - removed unused code
      - slab cache updates, last use of SLAB_MEM_SPREAD removed"

* tag 'for-6.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (114 commits)
  btrfs: reuse cloned extent buffer during fiemap to avoid re-allocations
  btrfs: fix race when detecting delalloc ranges during fiemap
  btrfs: fix off-by-one chunk length calculation at contains_pending_extent()
  btrfs: qgroup: allow quick inherit if snapshot is created and added to the same parent
  btrfs: qgroup: validate btrfs_qgroup_inherit parameter
  btrfs: include device major and minor numbers in the device scan notice
  btrfs: mark btrfs_put_caching_control() static
  btrfs: remove SLAB_MEM_SPREAD flag use
  btrfs: qgroup: always free reserved space for extent records
  btrfs: tree-checker: dump the page status if hit something wrong
  btrfs: compression: remove dead comments in btrfs_compress_heuristic()
  btrfs: subpage: make writer lock utilize bitmap
  btrfs: subpage: make reader lock utilize bitmap
  btrfs: unexport btrfs_subpage_start_writer() and btrfs_subpage_end_and_test_writer()
  btrfs: pass a valid extent map cache pointer to __get_extent_map()
  btrfs: merge btrfs_del_delalloc_inode() helpers
  btrfs: pass btrfs_device to btrfs_scratch_superblocks()
  btrfs: handle transaction commit errors in flush_reservations()
  btrfs: use KMEM_CACHE() to create btrfs_free_space cache
  btrfs: use KMEM_CACHE() to create delayed ref caches
  ...

Pull zonefs update from Damien Le Moal:

 - A single change for this cycle to convert zonefs to use the new
   mount API

* tag 'zonefs-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: convert zonefs to use the new mount api

Pull asm-generic updates from Arnd Bergmann:
 "Just two small updates this time:

   - A series I did to unify the definition of PAGE_SIZE through
     Kconfig, intended to help with a vdso rework that needs the
     constant but cannot include the normal kernel headers when building
     the compat VDSO on arm64 and potentially others

   - a patch from Yan Zhao to remove the pfn_to_virt() definitions from
     a couple of architectures after finding they were both incorrect
     and entirely unused"

* tag 'asm-generic-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  arch: define CONFIG_PAGE_SIZE_*KB on all architectures
  arch: simplify architecture specific page size configuration
  arch: consolidate existing CONFIG_PAGE_SIZE_*KB definitions
  mm: Remove broken pfn_to_virt() on arch csky/hexagon/openrisc

Pull ARM defconfig updates from Arnd Bergmann:
 "This has the usual updates to enable platform specific driver modules
  as new hardware gets supported, as well as an update to the
  virt.config fragment so we disable all newly added platforms again"

* tag 'soc-defconfig-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  arm64: defconfig: Enable support for cbmem entries in the coreboot table
  ARM: defconfig: enable STMicroelectronics accelerometer and gyro for Exynos
  arm64: defconfig: drop ext2 filesystem and redundant ext3
  arm64: defconfig: Enable Rockchip HDMI/eDP Combo PHY
  arm64: defconfig: Enable Wave5 Video Encoder/Decoder
  arm64: config: disable new platforms in virt.config
  arm64: defconfig: Enable QCOM PBS
  arm64: deconfig: enable Goodix Berlin SPI touchscreen driver as module
  arm64: defconfig: Enable X1E80100 multimedia clock controllers configs
  arm64: defconfig: Enable GCC and interconnect for QDU1000/QRU1000
  arm64: defconfig: enable i.MX8MP ldb bridge
  arm64: defconfig: enable the vf610 gpio driver
  ARM: imx_v6_v7_defconfig: enable the vf610 gpio driver
  ARM: multi_v7_defconfig: Add more TI Keystone support
  arm64: defconfig: enable WCD939x USBSS driver as module
  arm64: defconfig: enable audio drivers for SM8650 QRD board
  arm64: defconfig: Enable Qualcomm interconnect providers
  ARM: multi_v7_defconfig: Enable BACKLIGHT_CLASS_DEVICE
  arm64: defconfig: Enable i.MX8QXP device drivers
  ARM: multi_v7_defconfig: Add more TI Keystone support
  ...

Pull ARM SoC code updates from Arnd Bergmann:
 "These are mostly minor updates, including a number of kerneldoc fixes
  from Randy Dunlap across multiple platforms. OMAP gets a few bugfixes,
  and the MAINTAINERS file gets updated for AMD Zynq and NXP S32G"

* tag 'soc-arm-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
  ARM: s32c: update MAINTAINERS entry
  ARM: AM33xx: PRM: Implement REBOOT_COLD
  ARM: AM33xx: PRM: Remove redundand defines
  ARM: omap1: remove duplicated 'select ARCH_OMAP'
  ARM: s3c64xx: make bus_type const
  ARM: imx: Remove usage of the deprecated ida_simple_xx() API
  ARM: OMAP2+: fix kernel-doc warnings
  ARM: OMAP2+: fix kernel-doc warnings
  ARM: OMAP2+: fix a kernel-doc warning
  ARM: OMAP2+: PRM: fix kernel-doc warnings
  ARM: OMAP2+: prm44xx: fix a kernel-doc warning
  ARM: OMAP2+: pmic-cpcap: fix kernel-doc warnings
  ARM: OMAP2+: hwmod: fix kernel-doc warnings
  ARM: OMAP2+: hwmod: remove misuse of kernel-doc
  ARM: OMAP2+: CMINST: use matching function name in kernel-doc
  ARM: OMAP2+: cm33xx: use matching function name in kernel-doc
  ARM: OMAP2+: clock: fix a function name in kernel-doc
  ARM: OMAP2+: clockdomain: fix kernel-doc warnings
  ARM: OMAP2+: am33xx-restart: fix function name in kernel-doc
  soc: xilinx: update maintainer of event manager driver
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "This is the usual mix of updates for drivers that are used on (mostly
  ARM) SoCs with no other top-level subsystem tree, including:

   - The SCMI firmware subsystem gains support for version 3.2 of the
     specification and updates to the notification code

   - Feature updates for Tegra and Qualcomm platforms for added hardware
     support

   - A number of platforms get soc_device additions for identifying
     newly added chips from Renesas, Qualcomm, Mediatek and Google

   - Trivial improvements for firmware and memory drivers amongst
     others, in particular 'const' annotations throughout multiple
     subsystems"

* tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
  tee: make tee_bus_type const
  soc: qcom: aoss: add missing kerneldoc for qmp members
  soc: qcom: geni-se: drop unused kerneldoc struct geni_wrapper param
  soc: qcom: spm: fix building with CONFIG_REGULATOR=n
  bus: ti-sysc: constify the struct device_type usage
  memory: stm32-fmc2-ebi: keep power domain on
  memory: stm32-fmc2-ebi: add MP25 RIF support
  memory: stm32-fmc2-ebi: add MP25 support
  memory: stm32-fmc2-ebi: check regmap_read return value
  dt-bindings: memory-controller: st,stm32: add MP25 support
  dt-bindings: bus: imx-weim: convert to YAML
  watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
  soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
  MAINTAINERS: Update SCMI entry with HWMON driver
  MAINTAINERS: samsung: gs101: match patches touching Google Tensor SoC
  memory: tegra: Fix indentation
  memory: tegra: Add BPMP and ICC info for DLA clients
  memory: tegra: Correct DLA client names
  dt-bindings: memory: renesas,rpc-if: Document R-Car V4M support
  firmware: arm_scmi: Update the supported clock protocol version
  ...

Pull SoC device tree updates from Arnd Bergmann:
 "There is very little going on with new SoC support this time, all the
  new chips are variations of others that we already support, and they
  are all based on ARMv8 cores:

   - Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are
     networking SoCs designed to be used in wireless routers, similar to
     the already supported MT7986A (Filogic 830).

   - NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less.
     These are used in many embedded and industrial applications.

   - Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M) are
     automotive SoCs.

   - TI J722S is another automotive variant of its K3 family, related to
     the AM62 series.

  There are a total of 7 new arm32 machines and 45 arm64 ones, including

   - Two Android phones based on the old Tegra30 chip

   - Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and a
     SoM development board

   - A set-top box using Amlogic Meson G12A S905X2

   - Eight embedded board using NXP i.MX6/8/9

   - Three machines using Mediatek network router chips

   - Ten Chromebooks, all based on Mediatek MT8186

   - One development board based on Mediatek MT8395 (Genio 1200)

   - Seven tablets and phones based on Qualcomm SoCs, most of them from
     Samsung.

   - A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2)

   - Three variants of the "White Hawk" board for Renesas automotive
     SoCs

   - Ten Rockchips RK35xx based machines, including NAS, Tablet, Game
     console and industrial form factors.

   - Three evaluation boards for TI K3 based SoCs

  The other changes are mainly the usual feature additions for existing
  hardware, cleanups, and dtc compile time fixes. One notable change is
  the inclusion of PowerVR SGX GPU nodes on TI SoCs"

* tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (824 commits)
  riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
  riscv: dts: starfive: jh7100: fix root clock names
  ARM: dts: samsung: exynos4412: decrease memory to account for unusable region
  arm64: dts: qcom: sm8250-xiaomi-elish: set rotation
  arm64: dts: qcom: sm8650: Fix SPMI channels size
  arm64: dts: qcom: sm8550: Fix SPMI channels size
  arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
  arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure
  arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
  dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk
  dtc: Enable dtc interrupt_provider check
  arm64: dts: st: add video encoder support to stm32mp255
  arm64: dts: st: add video decoder support to stm32mp255
  ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk
  ARM: dts: stm32: enable CRC on stm32mp135f-dk
  ARM: dts: stm32: add CRC on stm32mp131
  ARM: dts: add stm32f769-disco-mb1166-reva09
  ARM: dts: stm32: add display support on stm32f769-disco
  ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
  ARM: dts: stm32: add DSI support on stm32f769
  ...

Pull m68k updates from Geert Uytterhoeven:

 - Make the Zorro bus type constant

 - defconfig updates

* tag 'm68k-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: defconfig: Update defconfigs for v6.8-rc1
  zorro: Make zorro_bus_type const

Pull s390 updates from Heiko Carstens:

 - Various virtual vs physical address usage fixes

 - Fix error handling in Processor Activity Instrumentation device
   driver, and export number of counters with a sysfs file

 - Allow for multiple events when Processor Activity Instrumentation
   counters are monitored in system wide sampling

 - Change multiplier and shift values of the Time-of-Day clock source to
   improve steering precision

 - Remove a couple of unneeded GFP_DMA flags from allocations

 - Disable mmap alignment if randomize_va_space is also disabled, to
   avoid a too small heap

 - Various changes to allow s390 to be compiled with LLVM=1, since
   ld.lld and llvm-objcopy will have proper s390 support witch clang 19

 - Add __uninitialized macro to Compiler Attributes. This is helpful
   with s390's FPU code where some users have up to 520 byte stack
   frames. Clearing such stack frames (if INIT_STACK_ALL_PATTERN or
   INIT_STACK_ALL_ZERO is enabled) before they are used contradicts the
   intention (performance improvement) of such code sections.

 - Convert switch_to() to an out-of-line function, and use the generic
   switch_to header file

 - Replace the usage of s390's debug feature with pr_debug() calls
   within the zcrypt device driver

 - Improve hotplug support of the Adjunct Processor device driver

 - Improve retry handling in the zcrypt device driver

 - Various changes to the in-kernel FPU code:

     - Make in-kernel FPU sections preemptible

     - Convert various larger inline assemblies and assembler files to
       C, mainly by using singe instruction inline assemblies. This
       increases readability, but also allows makes it easier to add
       proper instrumentation hooks

     - Cleanup of the header files

 - Provide fast variants of csum_partial() and
   csum_partial_copy_nocheck() based on vector instructions

 - Introduce and use a lock to synchronize accesses to zpci device data
   structures to avoid inconsistent states caused by concurrent accesses

 - Compile the kernel without -fPIE. This addresses the following
   problems if the kernel is compiled with -fPIE:

     - It uses dynamic symbols (.dynsym), for which the linker refuses
       to allow more than 64k sections. This can break features which
       use '-ffunction-sections' and '-fdata-sections', including
       kpatch-build and function granular KASLR

     - It unnecessarily uses GOT relocations, adding an extra layer of
       indirection for many memory accesses

 - Fix shared_cpu_list for CPU private L2 caches, which incorrectly were
   reported as globally shared

* tag 's390-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (117 commits)
  s390/tools: handle rela R_390_GOTPCDBL/R_390_GOTOFF64
  s390/cache: prevent rebuild of shared_cpu_list
  s390/crypto: remove retry loop with sleep from PAES pkey invocation
  s390/pkey: improve pkey retry behavior
  s390/zcrypt: improve zcrypt retry behavior
  s390/zcrypt: introduce retries on in-kernel send CPRB functions
  s390/ap: introduce mutex to lock the AP bus scan
  s390/ap: rework ap_scan_bus() to return true on config change
  s390/ap: clarify AP scan bus related functions and variables
  s390/ap: rearm APQNs bindings complete completion
  s390/configs: increase number of LOCKDEP_BITS
  s390/vfio-ap: handle hardware checkstop state on queue reset operation
  s390/pai: change sampling event assignment for PMU device driver
  s390/boot: fix minor comment style damages
  s390/boot: do not check for zero-termination relocation entry
  s390/boot: make type of __vmlinux_relocs_64_start|end consistent
  s390/boot: sanitize kaslr_adjust_relocs() function prototype
  s390/boot: simplify GOT handling
  s390: vmlinux.lds.S: fix .got.plt assertion
  s390/boot: workaround current 'llvm-objdump -t -j ...' behavior
  ...

Pull x86 boot updates from Ingo Molnar:

 - Continuing work by Ard Biesheuvel to improve the x86 early startup
   code, with the long-term goal to make it position independent:

      - Get rid of early accesses to global objects, either by moving
        them to the stack, deferring the access until later, or dropping
        the globals entirely

      - Move all code that runs early via the 1:1 mapping into
        .head.text, and move code that does not out of it, so that build
        time checks can be added later to ensure that no inadvertent
        absolute references were emitted into code that does not
        tolerate them

      - Remove fixup_pointer() and occurrences of __pa_symbol(), which
        rely on the compiler emitting absolute references, which is not
        guaranteed

 - Improve the early console code

 - Add early console message about ignored NMIs, so that users are at
   least warned about their existence - even if we cannot do anything
   about them

 - Improve the kexec code's kernel load address handling

 - Enable more X86S (simplified x86) bits

 - Simplify early boot GDT handling

 - Micro-optimize the boot code a bit

 - Misc cleanups

* tag 'x86-boot-2024-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  x86/sev: Move early startup code into .head.text section
  x86/sme: Move early SME kernel encryption handling into .head.text
  x86/boot: Move mem_encrypt= parsing to the decompressor
  efi/libstub: Add generic support for parsing mem_encrypt=
  x86/startup_64: Simplify virtual switch on primary boot
  x86/startup_64: Simplify calculation of initial page table address
  x86/startup_64: Defer assignment of 5-level paging global variables
  x86/startup_64: Simplify CR4 handling in startup code
  x86/boot: Use 32-bit XOR to clear registers
  efi/x86: Set the PE/COFF header's NX compat flag unconditionally
  x86/boot/64: Load the final kernel GDT during early boot directly, remove startup_gdt[]
  x86/boot/64: Use RIP_REL_REF() to access early_top_pgt[]
  x86/boot/64: Use RIP_REL_REF() to access early page tables
  x86/boot/64: Use RIP_REL_REF() to access '__supported_pte_mask'
  x86/boot/64: Use RIP_REL_REF() to access early_dynamic_pgts[]
  x86/boot/64: Use RIP_REL_REF() to assign 'phys_base'
  x86/boot/64: Simplify global variable accesses in GDT/IDT programming
  x86/trampoline: Bypass compat mode in trampoline_start64() if not needed
  kexec: Allocate kernel above bzImage's pref_address
  x86/boot: Add a message about ignored early NMIs
  ...

Pull x86 APIC fixup from Dave Hansen:
 "Revert VERW fixed addressing patch.

  The reverted commit is not x86/apic material and was cruft left over
  from a merge.

  I believe the sequence of events went something like this:

   - The commit in question was added to x86/urgent

   - x86/urgent was merged into x86/apic to resolve a conflict

   - The commit was zapped from x86/urgent, but *not* from x86/apic

   - x86/apic got pullled (yesterday)

  I think we need to be a bit more vigilant when zapping things to make
  sure none of the other branches are depending on the zapped material"

* tag 'x86-apic-2024-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "x86/bugs: Use fixed addressing for VERW operand"

Pull x86 RFDS mitigation from Dave Hansen:
 "RFDS is a CPU vulnerability that may allow a malicious userspace to
  infer stale register values from kernel space. Kernel registers can
  have all kinds of secrets in them so the mitigation is basically to
  wait until the kernel is about to return to userspace and has user
  values in the registers. At that point there is little chance of
  kernel secrets ending up in the registers and the microarchitectural
  state can be cleared.

  This leverages some recent robustness fixes for the existing MDS
  vulnerability. Both MDS and RFDS use the VERW instruction for
  mitigation"

* tag 'rfds-for-linus-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  KVM/x86: Export RFDS_NO and RFDS_CLEAR to guests
  x86/rfds: Mitigate Register File Data Sampling (RFDS)
  Documentation/hw-vuln: Add documentation for RFDS
  x86/mmio: Disable KVM mitigation when X86_FEATURE_CLEAR_CPU_BUF is set

This was reverts commit 8009479e.

It was originally in x86/urgent, but was deemed wrong so got zapped.
But in the meantime, x86/urgent had been merged into x86/apic to
resolve a conflict.  I didn't notice the merge so didn't zap it
from x86/apic and it managed to make it up with the x86/apic
material.

The reverted commit is known to cause some KASAN problems.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>

There's a new conflict with Linus's upstream tree, because
in the following merge conflict resolution in <asm/coco.h>:

  38b334fc Merge tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Linus has resolved the conflicting placement of 'cc_mask' better
than the original commit:

  1c811d40 x86/sev: Fix position dependent variable references in startup code

... which was also done by an internal merge resolution:

  2e5fc478 Merge branch 'x86/sev' into x86/boot, to resolve conflicts and to pick up dependent tree

But Linus is right in 38b334fc, the 'cc_mask' declaration is sufficient
within the #ifdef CONFIG_ARCH_HAS_CC_PLATFORM block.

So instead of forcing Linus to do the same resolution again, merge in Linus's
tree and follow his conflict resolution.

 Conflicts:
	arch/x86/include/asm/coco.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull x86 tdx update from Dave Hansen:

 - Fix sparse warning from TDX use of movdir64b()

* tag 'x86_tdx_for_6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm: Remove the __iomem annotation of movdir64b()'s dst argument

Pull x86 mm updates from Dave Hansen:

 - Add a warning when memory encryption conversions fail. These
   operations require VMM cooperation, even in CoCo environments where
   the VMM is untrusted. While it's _possible_ that memory pressure
   could trigger the new warning, the odds are that a guest would only
   see this from an attacking VMM.

 - Simplify page fault code by re-enabling interrupts unconditionally

 - Avoid truncation issues when pfns are passed in to pfn_to_kaddr()
   with small (<64-bit) types.

* tag 'x86_mm_for_6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/cpa: Warn for set_memory_XXcrypted() VMM fails
  x86/mm: Get rid of conditional IF flag handling in page fault path
  x86/mm: Ensure input to pfn_to_kaddr() is treated as a 64-bit type

Pull core x86 updates from Ingo Molnar:

 - The biggest change is the rework of the percpu code, to support the
   'Named Address Spaces' GCC feature, by Uros Bizjak:

      - This allows C code to access GS and FS segment relative memory
        via variables declared with such attributes, which allows the
        compiler to better optimize those accesses than the previous
        inline assembly code.

      - The series also includes a number of micro-optimizations for
        various percpu access methods, plus a number of cleanups of %gs
        accesses in assembly code.

      - These changes have been exposed to linux-next testing for the
        last ~5 months, with no known regressions in this area.

 - Fix/clean up __switch_to()'s broken but accidentally working handling
   of FPU switching - which also generates better code

 - Propagate more RIP-relative addressing in assembly code, to generate
   slightly better code

 - Rework the CPU mitigations Kconfig space to be less idiosyncratic, to
   make it easier for distros to follow & maintain these options

 - Rework the x86 idle code to cure RCU violations and to clean up the
   logic

 - Clean up the vDSO Makefile logic

 - Misc cleanups and fixes

* tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  x86/idle: Select idle routine only once
  x86/idle: Let prefer_mwait_c1_over_halt() return bool
  x86/idle: Cleanup idle_setup()
  x86/idle: Clean up idle selection
  x86/idle: Sanitize X86_BUG_AMD_E400 handling
  sched/idle: Conditionally handle tick broadcast in default_idle_call()
  x86: Increase brk randomness entropy for 64-bit systems
  x86/vdso: Move vDSO to mmap region
  x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together
  x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o
  x86/retpoline: Ensure default return thunk isn't used at runtime
  x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32
  x86/vdso: Use $(addprefix ) instead of $(foreach )
  x86/vdso: Simplify obj-y addition
  x86/vdso: Consolidate targets and clean-files
  x86/bugs: Rename CONFIG_RETHUNK              => CONFIG_MITIGATION_RETHUNK
  x86/bugs: Rename CONFIG_CPU_SRSO             => CONFIG_MITIGATION_SRSO
  x86/bugs: Rename CONFIG_CPU_IBRS_ENTRY       => CONFIG_MITIGATION_IBRS_ENTRY
  x86/bugs: Rename CONFIG_CPU_UNRET_ENTRY      => CONFIG_MITIGATION_UNRET_ENTRY
  x86/bugs: Rename CONFIG_SLS                  => CONFIG_MITIGATION_SLS
  ...

Pull x86 cleanups from Ingo Molnar:
 "Misc cleanups, including a large series from Thomas Gleixner to cure
  sparse warnings"

* tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/nmi: Drop unused declaration of proc_nmi_enabled()
  x86/callthunks: Use EXPORT_PER_CPU_SYMBOL_GPL() for per CPU variables
  x86/cpu: Provide a declaration for itlb_multihit_kvm_mitigation
  x86/cpu: Use EXPORT_PER_CPU_SYMBOL_GPL() for x86_spec_ctrl_current
  x86/uaccess: Add missing __force to casts in __access_ok() and valid_user_address()
  x86/percpu: Cure per CPU madness on UP
  smp: Consolidate smp_prepare_boot_cpu()
  x86/msr: Add missing __percpu annotations
  x86/msr: Prepare for including <linux/percpu.h> into <asm/msr.h>
  perf/x86/amd/uncore: Fix __percpu annotation
  x86/nmi: Remove an unnecessary IS_ENABLED(CONFIG_SMP)
  x86/apm_32: Remove dead function apm_get_battery_status()
  x86/insn-eval: Fix function param name in get_eff_addr_sib()

Pull x86 build updates from Ingo Molnar:

 - Reduce <asm/bootparam.h> dependencies

 - Simplify <asm/efi.h>

 - Unify *_setup_data definitions into <asm/setup_data.h>

 - Reduce the size of <asm/bootparam.h>

* tag 'x86-build-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Do not include <asm/bootparam.h> in several files
  x86/efi: Implement arch_ima_efi_boot_mode() in source file
  x86/setup: Move internal setup_data structures into setup_data.h
  x86/setup: Move UAPI setup structures into setup_data.h

Pull x86 asm updates from Ingo Molnar:
 "Two changes to simplify the x86 decoder logic a bit"

* tag 'x86-asm-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/insn: Directly assign x86_64 state in insn_init()
  x86/insn: Remove superfluous checks from instruction decoding routines

Pull scheduler updates from Ingo Molnar:

 - Fix inconsistency in misfit task load-balancing

 - Fix CPU isolation bugs in the task-wakeup logic

 - Rework and unify the sched_use_asym_prio() and sched_asym_prefer()
   logic

 - Clean up and simplify ->avg_* accesses

 - Misc cleanups and fixes

* tag 'sched-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/topology: Rename SD_SHARE_PKG_RESOURCES to SD_SHARE_LLC
  sched/fair: Check the SD_ASYM_PACKING flag in sched_use_asym_prio()
  sched/fair: Rework sched_use_asym_prio() and sched_asym_prefer()
  sched/fair: Remove unused parameter from sched_asym()
  sched/topology: Remove duplicate descriptions from TOPOLOGY_SD_FLAGS
  sched/fair: Simplify the update_sd_pick_busiest() logic
  sched/fair: Do strict inequality check for busiest misfit task group
  sched/fair: Remove unnecessary goto in update_sd_lb_stats()
  sched/fair: Take the scheduling domain into account in select_idle_core()
  sched/fair: Take the scheduling domain into account in select_idle_smt()
  sched/fair: Add READ_ONCE() and use existing helper function to access ->avg_irq
  sched/fair: Use existing helper functions to access ->avg_rt and ->avg_dl
  sched/core: Simplify code by removing duplicate #ifdefs

Pull locking updates from Ingo Molnar:

 - Micro-optimize local_xchg() and the rtmutex code on x86

 - Fix percpu-rwsem contention tracepoints

 - Simplify debugging Kconfig dependencies

 - Update/clarify the documentation of atomic primitives

 - Misc cleanups

* tag 'locking-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rtmutex: Use try_cmpxchg_relaxed() in mark_rt_mutex_waiters()
  locking/x86: Implement local_xchg() using CMPXCHG without the LOCK prefix
  locking/percpu-rwsem: Trigger contention tracepoints only if contended
  locking/rwsem: Make DEBUG_RWSEMS and PREEMPT_RT mutually exclusive
  locking/rwsem: Clarify that RWSEM_READER_OWNED is just a hint
  locking/mutex: Simplify <linux/mutex.h>
  locking/qspinlock: Fix 'wait_early' set but not used warning
  locking/atomic: scripts: Clarify ordering of conditional atomics

Pull EDAC updates from Borislav Petkov:

 - Add a FRU (Field Replaceable Unit) memory poison manager which
   collects and manages previously encountered hw errors in order to
   save them to persistent storage across reboots. Previously recorded
   errors are "replayed" upon reboot in order to poison memory which has
   caused said errors in the past.

   The main use case is stacked, on-chip memory which cannot simply be
   replaced so poisoning faulty areas of it and thus making them
   inaccessible is the only strategy to prolong its lifetime.

 - Add an AMD address translation library glue which converts the
   reported addresses of hw errors into system physical addresses in
   order to be used by other subsystems like memory failure, for
   example. Add support for MI300 accelerators to that library.

 - igen6: Add support for Alder Lake-N SoC

 - i10nm: Add Grand Ridge support

 - The usual fixlets and cleanups

* tag 'edac_updates_for_v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/versal: Convert to platform remove callback returning void
  RAS/AMD/FMPM: Fix off by one when unwinding on error
  RAS/AMD/FMPM: Add debugfs interface to print record entries
  RAS/AMD/FMPM: Save SPA values
  RAS: Export helper to get ras_debugfs_dir
  RAS/AMD/ATL: Fix bit overflow in denorm_addr_df4_np2()
  RAS: Introduce a FRU memory poison manager
  RAS/AMD/ATL: Add MI300 row retirement support
  Documentation: Move RAS section to admin-guide
  EDAC/versal: Make the bit position of injected errors configurable
  EDAC/i10nm: Add Intel Grand Ridge micro-server support
  EDAC/igen6: Add one more Intel Alder Lake-N SoC support
  RAS/AMD/ATL: Add MI300 DRAM to normalized address translation support
  RAS/AMD/ATL: Fix array overflow in get_logical_coh_st_fabric_id_mi300()
  RAS/AMD/ATL: Add MI300 support
  Documentation: RAS: Add index and address translation section
  EDAC/amd64: Use new AMD Address Translation Library
  RAS: Introduce AMD Address Translation Library
  EDAC/synopsys: Convert to devm_platform_ioremap_resource()

Pull misc x86 fixes from Borislav Petkov:

 - Fix a wrong check in the function reporting whether a CPU executes
   (or not) a NMI handler

 - Ratelimit unknown NMIs messages in order to not potentially slow down
   the machine

 - Other fixlets

* tag 'x86_misc_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/nmi: Fix the inverse "in NMI handler" check
  Documentation/maintainer-tip: Add C++ tail comments exception
  Documentation/maintainer-tip: Add Closes tag
  x86/nmi: Rate limit unknown NMI messages
  Documentation/kernel-parameters: Add spec_rstack_overflow to mitigations=off

Pull x86 SEV updates from Borislav Petkov:

 - Add the x86 part of the SEV-SNP host support.

   This will allow the kernel to be used as a KVM hypervisor capable of
   running SNP (Secure Nested Paging) guests. Roughly speaking, SEV-SNP
   is the ultimate goal of the AMD confidential computing side,
   providing the most comprehensive confidential computing environment
   up to date.

   This is the x86 part and there is a KVM part which did not get ready
   in time for the merge window so latter will be forthcoming in the
   next cycle.

 - Rework the early code's position-dependent SEV variable references in
   order to allow building the kernel with clang and -fPIE/-fPIC and
   -mcmodel=kernel

 - The usual set of fixes, cleanups and improvements all over the place

* tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  x86/sev: Disable KMSAN for memory encryption TUs
  x86/sev: Dump SEV_STATUS
  crypto: ccp - Have it depend on AMD_IOMMU
  iommu/amd: Fix failure return from snp_lookup_rmpentry()
  x86/sev: Fix position dependent variable references in startup code
  crypto: ccp: Make snp_range_list static
  x86/Kconfig: Remove CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT
  Documentation: virt: Fix up pre-formatted text block for SEV ioctls
  crypto: ccp: Add the SNP_SET_CONFIG command
  crypto: ccp: Add the SNP_COMMIT command
  crypto: ccp: Add the SNP_PLATFORM_STATUS command
  x86/cpufeatures: Enable/unmask SEV-SNP CPU feature
  KVM: SEV: Make AVIC backing, VMSA and VMCB memory allocation SNP safe
  crypto: ccp: Add panic notifier for SEV/SNP firmware shutdown on kdump
  iommu/amd: Clean up RMP entries for IOMMU pages during SNP shutdown
  crypto: ccp: Handle legacy SEV commands when SNP is enabled
  crypto: ccp: Handle non-volatile INIT_EX data when SNP is enabled
  crypto: ccp: Handle the legacy TMR allocation when SNP is enabled
  x86/sev: Introduce an SNP leaked pages list
  crypto: ccp: Provide an API to issue SEV and SNP commands
  ...

Pull resource control updates from Borislav Petkov:

 - Rework different aspects of the resctrl code like adding
   arch-specific accessors and splitting the locking, in order to
   accomodate ARM's MPAM implementation of hw resource control and be
   able to use the same filesystem control interface like on x86. Work
   by James Morse

 - Improve the memory bandwidth throttling heuristic to handle workloads
   with not too regular load levels which end up penalized unnecessarily

 - Use CPUID to detect the memory bandwidth enforcement limit on AMD

 - The usual set of fixes

* tag 'x86_cache_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
  x86/resctrl: Remove lockdep annotation that triggers false positive
  x86/resctrl: Separate arch and fs resctrl locks
  x86/resctrl: Move domain helper migration into resctrl_offline_cpu()
  x86/resctrl: Add CPU offline callback for resctrl work
  x86/resctrl: Allow overflow/limbo handlers to be scheduled on any-but CPU
  x86/resctrl: Add CPU online callback for resctrl work
  x86/resctrl: Add helpers for system wide mon/alloc capable
  x86/resctrl: Make rdt_enable_key the arch's decision to switch
  x86/resctrl: Move alloc/mon static keys into helpers
  x86/resctrl: Make resctrl_mounted checks explicit
  x86/resctrl: Allow arch to allocate memory needed in resctrl_arch_rmid_read()
  x86/resctrl: Allow resctrl_arch_rmid_read() to sleep
  x86/resctrl: Queue mon_event_read() instead of sending an IPI
  x86/resctrl: Add cpumask_any_housekeeping() for limbo/overflow
  x86/resctrl: Move CLOSID/RMID matching and setting to use helpers
  x86/resctrl: Allocate the cleanest CLOSID by searching closid_num_dirty_rmid
  x86/resctrl: Use __set_bit()/__clear_bit() instead of open coding
  x86/resctrl: Track the number of dirty RMID a CLOSID has
  x86/resctrl: Allow RMID allocation to be scoped by CLOSID
  x86/resctrl: Access per-rmid structures by index
  ...

Pull x86 MTRR update from Borislav Petkov:

 - Relax the PAT MSR programming which was unnecessarily using the MTRR
   programming protocol of disabling the cache around the changes. The
   reason behind this is the current algorithm triggering a #VE
   exception for TDX guests and unnecessarily complicating things

* tag 'x86_mtrr_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pat: Simplify the PAT programming protocol

Pull x86 cpu update from Borislav Petkov:

 - Have AMD Zen common init code run on all families from Zen1 onwards
   in order to save some future enablement effort

* tag 'x86_cpu_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/CPU/AMD: Do the common init on future Zens too

Pull RAS fixlet from Borislav Petkov:

 - Constify yet another static struct bus_type instance now that the
   driver core can handle that

* tag 'ras_core_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Make mce_subsys const

This reverts commit 8e0ef412.

It's broken, and causes the boot to fail on encrypted volumes.
Reported-and-bisected-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/all/20240311235023.GA1205@cmpxchg.org/Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull x86 entry update from Thomas Gleixner:
 "A single update for the x86 entry code:

  The current CR3 handling for kernel page table isolation in the
  paranoid return paths which are relevant for #NMI, #MCE, #VC, #DB and
  #DF is unconditionally writing CR3 with the value retrieved on
  exception entry.

  In the vast majority of cases when returning to the kernel this is a
  pointless exercise because CR3 was not modified on exception entry.
  The only situation where this is necessary is when the exception
  interrupts a entry from user before switching to kernel CR3 or
  interrupts an exit to user after switching back to user CR3.

  As CR3 writes can be expensive on some systems this becomes measurable
  overhead with high frequency #NMIs such as perf.

  Avoid this overhead by checking the CR3 value, which was saved on
  entry, and write it back to CR3 only when it is a user CR3"

* tag 'x86-entry-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry: Avoid redundant CR3 write on paranoid returns

Pull x86 FRED support from Thomas Gleixner:
 "Support for x86 Fast Return and Event Delivery (FRED).

  FRED is a replacement for IDT event delivery on x86 and addresses most
  of the technical nightmares which IDT exposes:

   1) Exception cause registers like CR2 need to be manually preserved
      in nested exception scenarios.

   2) Hardware interrupt stack switching is suboptimal for nested
      exceptions as the interrupt stack mechanism rewinds the stack on
      each entry which requires a massive effort in the low level entry
      of #NMI code to handle this.

   3) No hardware distinction between entry from kernel or from user
      which makes establishing kernel context more complex than it needs
      to be especially for unconditionally nestable exceptions like NMI.

   4) NMI nesting caused by IRET unconditionally reenabling NMIs, which
      is a problem when the perf NMI takes a fault when collecting a
      stack trace.

   5) Partial restore of ESP when returning to a 16-bit segment

   6) Limitation of the vector space which can cause vector exhaustion
      on large systems.

   7) Inability to differentiate NMI sources

  FRED addresses these shortcomings by:

   1) An extended exception stack frame which the CPU uses to save
      exception cause registers. This ensures that the meta information
      for each exception is preserved on stack and avoids the extra
      complexity of preserving it in software.

   2) Hardware interrupt stack switching is non-rewinding if a nested
      exception uses the currently interrupt stack.

   3) The entry points for kernel and user context are separate and GS
      BASE handling which is required to establish kernel context for
      per CPU variable access is done in hardware.

   4) NMIs are now nesting protected. They are only reenabled on the
      return from NMI.

   5) FRED guarantees full restore of ESP

   6) FRED does not put a limitation on the vector space by design
      because it uses a central entry points for kernel and user space
      and the CPUstores the entry type (exception, trap, interrupt,
      syscall) on the entry stack along with the vector number. The
      entry code has to demultiplex this information, but this removes
      the vector space restriction.

      The first hardware implementations will still have the current
      restricted vector space because lifting this limitation requires
      further changes to the local APIC.

   7) FRED stores the vector number and meta information on stack which
      allows having more than one NMI vector in future hardware when the
      required local APIC changes are in place.

  The series implements the initial FRED support by:

   - Reworking the existing entry and IDT handling infrastructure to
     accomodate for the alternative entry mechanism.

   - Expanding the stack frame to accomodate for the extra 16 bytes FRED
     requires to store context and meta information

   - Providing FRED specific C entry points for events which have
     information pushed to the extended stack frame, e.g. #PF and #DB.

   - Providing FRED specific C entry points for #NMI and #MCE

   - Implementing the FRED specific ASM entry points and the C code to
     demultiplex the events

   - Providing detection and initialization mechanisms and the necessary
     tweaks in context switching, GS BASE handling etc.

  The FRED integration aims for maximum code reuse vs the existing IDT
  implementation to the extent possible and the deviation in hot paths
  like context switching are handled with alternatives to minimalize the
  impact. The low level entry and exit paths are seperate due to the
  extended stack frame and the hardware based GS BASE swichting and
  therefore have no impact on IDT based systems.

  It has been extensively tested on existing systems and on the FRED
  simulation and as of now there are no outstanding problems"

* tag 'x86-fred-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
  x86/fred: Fix init_task thread stack pointer initialization
  MAINTAINERS: Add a maintainer entry for FRED
  x86/fred: Fix a build warning with allmodconfig due to 'inline' failing to inline properly
  x86/fred: Invoke FRED initialization code to enable FRED
  x86/fred: Add FRED initialization functions
  x86/syscall: Split IDT syscall setup code into idt_syscall_init()
  KVM: VMX: Call fred_entry_from_kvm() for IRQ/NMI handling
  x86/entry: Add fred_entry_from_kvm() for VMX to handle IRQ/NMI
  x86/entry/calling: Allow PUSH_AND_CLEAR_REGS being used beyond actual entry code
  x86/fred: Fixup fault on ERETU by jumping to fred_entrypoint_user
  x86/fred: Let ret_from_fork_asm() jmp to asm_fred_exit_user when FRED is enabled
  x86/traps: Add sysvec_install() to install a system interrupt handler
  x86/fred: FRED entry/exit and dispatch code
  x86/fred: Add a machine check entry stub for FRED
  x86/fred: Add a NMI entry stub for FRED
  x86/fred: Add a debug fault entry stub for FRED
  x86/idtentry: Incorporate definitions/declarations of the FRED entries
  x86/fred: Make exc_page_fault() work for FRED
  x86/fred: Allow single-step trap and NMI when starting a new task
  x86/fred: No ESPFIX needed when FRED is enabled
  ...

Pull x86 APIC updates from Thomas Gleixner:
 "Rework of APIC enumeration and topology evaluation.

  The current implementation has a couple of shortcomings:

   - It fails to handle hybrid systems correctly.

   - The APIC registration code which handles CPU number assignents is
     in the middle of the APIC code and detached from the topology
     evaluation.

   - The various mechanisms which enumerate APICs, ACPI, MPPARSE and
     guest specific ones, tweak global variables as they see fit or in
     case of XENPV just hack around the generic mechanisms completely.

   - The CPUID topology evaluation code is sprinkled all over the vendor
     code and reevaluates global variables on every hotplug operation.

   - There is no way to analyze topology on the boot CPU before bringing
     up the APs. This causes problems for infrastructure like PERF which
     needs to size certain aspects upfront or could be simplified if
     that would be possible.

   - The APIC admission and CPU number association logic is
     incomprehensible and overly complex and needs to be kept around
     after boot instead of completing this right after the APIC
     enumeration.

  This update addresses these shortcomings with the following changes:

   - Rework the CPUID evaluation code so it is common for all vendors
     and provides information about the APIC ID segments in a uniform
     way independent of the number of segments (Thread, Core, Module,
     ..., Die, Package) so that this information can be computed instead
     of rewriting global variables of dubious value over and over.

   - A few cleanups and simplifcations of the APIC, IO/APIC and related
     interfaces to prepare for the topology evaluation changes.

   - Seperation of the parser stages so the early evaluation which tries
     to find the APIC address can be seperately overridden from the late
     evaluation which enumerates and registers the local APIC as further
     preparation for sanitizing the topology evaluation.

   - A new registration and admission logic which

       - encapsulates the inner workings so that parsers and guest logic
         cannot longer fiddle in it

       - uses the APIC ID segments to build topology bitmaps at
         registration time

       - provides a sane admission logic

       - allows to detect the crash kernel case, where CPU0 does not run
         on the real BSP, automatically. This is required to prevent
         sending INIT/SIPI sequences to the real BSP which would reset
         the whole machine. This was so far handled by a tedious command
         line parameter, which does not even work in nested crash
         scenarios.

       - Associates CPU number after the enumeration completed and
         prevents the late registration of APICs, which was somehow
         tolerated before.

   - Converting all parsers and guest enumeration mechanisms over to the
     new interfaces.

     This allows to get rid of all global variable tweaking from the
     parsers and enumeration mechanisms and sanitizes the XEN[PV]
     handling so it can use CPUID evaluation for the first time.

   - Mopping up existing sins by taking the information from the APIC ID
     segment bitmaps.

     This evaluates hybrid systems correctly on the boot CPU and allows
     for cleanups and fixes in the related drivers, e.g. PERF.

  The series has been extensively tested and the minimal late fallout
  due to a broken ACPI/MADT table has been addressed by tightening the
  admission logic further"

* tag 'x86-apic-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (76 commits)
  x86/topology: Ignore non-present APIC IDs in a present package
  x86/apic: Build the x86 topology enumeration functions on UP APIC builds too
  smp: Provide 'setup_max_cpus' definition on UP too
  smp: Avoid 'setup_max_cpus' namespace collision/shadowing
  x86/bugs: Use fixed addressing for VERW operand
  x86/cpu/topology: Get rid of cpuinfo::x86_max_cores
  x86/cpu/topology: Provide __num_[cores|threads]_per_package
  x86/cpu/topology: Rename topology_max_die_per_package()
  x86/cpu/topology: Rename smp_num_siblings
  x86/cpu/topology: Retrieve cores per package from topology bitmaps
  x86/cpu/topology: Use topology logical mapping mechanism
  x86/cpu/topology: Provide logical pkg/die mapping
  x86/cpu/topology: Simplify cpu_mark_primary_thread()
  x86/cpu/topology: Mop up primary thread mask handling
  x86/cpu/topology: Use topology bitmaps for sizing
  x86/cpu/topology: Let XEN/PV use topology from CPUID/MADT
  x86/xen/smp_pv: Count number of vCPUs early
  x86/cpu/topology: Assign hotpluggable CPUIDs during init
  x86/cpu/topology: Reject unknown APIC IDs on ACPI hotplug
  x86/topology: Add a mechanism to track topology via APIC IDs
  ...

Pull timer updates from Thomas Gleixner:
 "A large set of updates and features for timers and timekeeping:

   - The hierarchical timer pull model

     When timer wheel timers are armed they are placed into the timer
     wheel of a CPU which is likely to be busy at the time of expiry.
     This is done to avoid wakeups on potentially idle CPUs.

     This is wrong in several aspects:

       1) The heuristics to select the target CPU are wrong by
          definition as the chance to get the prediction right is
          close to zero.

       2) Due to #1 it is possible that timers are accumulated on
          a single target CPU

       3) The required computation in the enqueue path is just overhead
          for dubious value especially under the consideration that the
          vast majority of timer wheel timers are either canceled or
          rearmed before they expire.

     The timer pull model avoids the above by removing the target
     computation on enqueue and queueing timers always on the CPU on
     which they get armed.

     This is achieved by having separate wheels for CPU pinned timers
     and global timers which do not care about where they expire.

     As long as a CPU is busy it handles both the pinned and the global
     timers which are queued on the CPU local timer wheels.

     When a CPU goes idle it evaluates its own timer wheels:

       - If the first expiring timer is a pinned timer, then the global
         timers can be ignored as the CPU will wake up before they
         expire.

       - If the first expiring timer is a global timer, then the expiry
         time is propagated into the timer pull hierarchy and the CPU
         makes sure to wake up for the first pinned timer.

     The timer pull hierarchy organizes CPUs in groups of eight at the
     lowest level and at the next levels groups of eight groups up to
     the point where no further aggregation of groups is required, i.e.
     the number of levels is log8(NR_CPUS). The magic number of eight
     has been established by experimention, but can be adjusted if
     needed.

     In each group one busy CPU acts as the migrator. It's only one CPU
     to avoid lock contention on remote timer wheels.

     The migrator CPU checks in its own timer wheel handling whether
     there are other CPUs in the group which have gone idle and have
     global timers to expire. If there are global timers to expire, the
     migrator locks the remote CPU timer wheel and handles the expiry.

     Depending on the group level in the hierarchy this handling can
     require to walk the hierarchy downwards to the CPU level.

     Special care is taken when the last CPU goes idle. At this point
     the CPU is the systemwide migrator at the top of the hierarchy and
     it therefore cannot delegate to the hierarchy. It needs to arm its
     own timer device to expire either at the first expiring timer in
     the hierarchy or at the first CPU local timer, which ever expires
     first.

     This completely removes the overhead from the enqueue path, which
     is e.g. for networking a true hotpath and trades it for a slightly
     more complex idle path.

     This has been in development for a couple of years and the final
     series has been extensively tested by various teams from silicon
     vendors and ran through extensive CI.

     There have been slight performance improvements observed on network
     centric workloads and an Intel team confirmed that this allows them
     to power down a die completely on a mult-die socket for the first
     time in a mostly idle scenario.

     There is only one outstanding ~1.5% regression on a specific
     overloaded netperf test which is currently investigated, but the
     rest is either positive or neutral performance wise and positive on
     the power management side.

   - Fixes for the timekeeping interpolation code for cross-timestamps:

     cross-timestamps are used for PTP to get snapshots from hardware
     timers and interpolated them back to clock MONOTONIC. The changes
     address a few corner cases in the interpolation code which got the
     math and logic wrong.

   - Simplifcation of the clocksource watchdog retry logic to
     automatically adjust to handle larger systems correctly instead of
     having more incomprehensible command line parameters.

   - Treewide consolidation of the VDSO data structures.

   - The usual small improvements and cleanups all over the place"

* tag 'timers-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
  timer/migration: Fix quick check reporting late expiry
  tick/sched: Fix build failure for CONFIG_NO_HZ_COMMON=n
  vdso/datapage: Quick fix - use asm/page-def.h for ARM64
  timers: Assert no next dyntick timer look-up while CPU is offline
  tick: Assume timekeeping is correctly handed over upon last offline idle call
  tick: Shut down low-res tick from dying CPU
  tick: Split nohz and highres features from nohz_mode
  tick: Move individual bit features to debuggable mask accesses
  tick: Move got_idle_tick away from common flags
  tick: Assume the tick can't be stopped in NOHZ_MODE_INACTIVE mode
  tick: Move broadcast cancellation up to CPUHP_AP_TICK_DYING
  tick: Move tick cancellation up to CPUHP_AP_TICK_DYING
  tick: Start centralizing tick related CPU hotplug operations
  tick/sched: Don't clear ts::next_tick again in can_stop_idle_tick()
  tick/sched: Rename tick_nohz_stop_sched_tick() to tick_nohz_full_stop_tick()
  tick: Use IS_ENABLED() whenever possible
  tick/sched: Remove useless oneshot ifdeffery
  tick/nohz: Remove duplicate between lowres and highres handlers
  tick/nohz: Remove duplicate between tick_nohz_switch_to_nohz() and tick_setup_sched_timer()
  hrtimer: Select housekeeping CPU during migration
  ...

Pull clocksource updates from Thomas Gleixner:
 "Updates for timekeeping and PTP core.

  The cross-timestamp mechanism which allows to correlate hardware
  clocks uses clocksource pointers for describing the correlation.

  That's suboptimal as drivers need to obtain the pointer, which
  requires needless exports and exposing internals. This can all be
  completely avoided by assigning clocksource IDs and using them for
  describing the correlated clock source.

  So this adds clocksource IDs to all clocksources in the tree which can
  be exposed to this mechanism and removes the pointer and now needless
  exports.

  A related improvement for the core and the correlation handling has
  not made it this time, but is expected to get ready for the next
  round"

* tag 'timers-ptp-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kvmclock: Unexport kvmclock clocksource
  treewide: Remove system_counterval_t.cs, which is never read
  timekeeping: Evaluate system_counterval_t.cs_id instead of .cs
  ptp/kvm, arm_arch_timer: Set system_counterval_t.cs_id to constant
  x86/kvm, ptp/kvm: Add clocksource ID, set system_counterval_t.cs_id
  x86/tsc: Add clocksource ID, set system_counterval_t.cs_id
  timekeeping: Add clocksource ID to struct system_counterval_t
  x86/tsc: Correct kernel-doc notation

Pull cpu core updates from Thomas Gleixner:
 "A small boring set of cleanups for the SMP and CPU hotplug code"

* tag 'smp-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu: Remove stray semicolon
  smp: Make __smp_processor_id() 0-argument macro
  cpu: Mark cpu_possible_mask as __ro_after_init
  kernel/cpu: Convert snprintf() to sysfs_emit()
  cpu/hotplug: Delete an extraneous kernel-doc description

Pull MSI updates from Thomas Gleixner:
 "Updates for the MSI interrupt subsystem and initial RISC-V MSI
  support.

  The core changes have been adopted from previous work which converted
  ARM[64] to the new per device MSI domain model, which was merged to
  support multiple MSI domain per device. The ARM[64] changes are being
  worked on too, but have not been ready yet. The core and platform-MSI
  changes have been split out to not hold up RISC-V and to avoid that
  RISC-V builds on the scheduled for removal interfaces.

  The core support provides new interfaces to handle wire to MSI bridges
  in a straight forward way and introduces new platform-MSI interfaces
  which are built on top of the per device MSI domain model.

  Once ARM[64] is converted over the old platform-MSI interfaces and the
  related ugliness in the MSI core code will be removed.

  The actual MSI parts for RISC-V were finalized late and have been
  post-poned for the next merge window.

  Drivers:

   - Add a new driver for the Andes hart-level interrupt controller

   - Rework the SiFive PLIC driver to prepare for MSI suport

   - Expand the RISC-V INTC driver to support the new RISC-V AIA
     controller which provides the basis for MSI on RISC-V

   - A few fixup for the fallout of the core changes"

* tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
  irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA
  x86/apic/msi: Use DOMAIN_BUS_GENERIC_MSI for HPET/IO-APIC domain search
  genirq/matrix: Dynamic bitmap allocation
  irqchip/riscv-intc: Add support for RISC-V AIA
  irqchip/sifive-plic: Improve locking safety by using irqsave/irqrestore
  irqchip/sifive-plic: Parse number of interrupts and contexts early in plic_probe()
  irqchip/sifive-plic: Cleanup PLIC contexts upon irqdomain creation failure
  irqchip/sifive-plic: Use riscv_get_intc_hwnode() to get parent fwnode
  irqchip/sifive-plic: Use devm_xyz() for managed allocation
  irqchip/sifive-plic: Use dev_xyz() in-place of pr_xyz()
  irqchip/sifive-plic: Convert PLIC driver into a platform driver
  irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
  irqchip/riscv-intc: Allow large non-standard interrupt number
  genirq/irqdomain: Don't call ops->select for DOMAIN_BUS_ANY tokens
  irqchip/imx-intmux: Handle pure domain searches correctly
  genirq/msi: Provide MSI_FLAG_PARENT_PM_DEV
  genirq/irqdomain: Reroute device MSI create_mapping
  genirq/msi: Provide allocation/free functions for "wired" MSI interrupts
  genirq/msi: Optionally use dev->fwnode for device domain
  genirq/msi: Provide DOMAIN_BUS_WIRED_TO_MSI
  ...

Pull irq updates from Thomas Gleixner:
 "Core:

   - Make affinity changes take effect immediately for interrupt
     threads. This reduces the impact on isolated CPUs as it pulls over
     the thread right away instead of doing it after the next hardware
     interrupt arrived.

   - Cleanup and improvements for the interrupt chip simulator

   - Deduplication of the interrupt descriptor initialization code so
     the sparse and non-sparse mode share more code.

  Drivers:

   - A set of conversions to platform_drivers::remove_new() which gets
     rid of the pointless return value.

   - A new driver for the Starfive JH8100 SoC

   - Support for Amlogic-T7 SoCs

   - Improvement for the interrupt handling and EOI management for the
     loongson interrupt controller.

   - The usual fixes and improvements all over the place"

* tag 'irq-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  irqchip/ts4800: Convert to platform_driver::remove_new() callback
  irqchip/stm32-exti: Convert to platform_driver::remove_new() callback
  irqchip/renesas-rza1: Convert to platform_driver::remove_new() callback
  irqchip/renesas-irqc: Convert to platform_driver::remove_new() callback
  irqchip/renesas-intc-irqpin: Convert to platform_driver::remove_new() callback
  irqchip/pruss-intc: Convert to platform_driver::remove_new() callback
  irqchip/mvebu-pic: Convert to platform_driver::remove_new() callback
  irqchip/madera: Convert to platform_driver::remove_new() callback
  irqchip/ls-scfg-msi: Convert to platform_driver::remove_new() callback
  irqchip/keystone: Convert to platform_driver::remove_new() callback
  irqchip/imx-irqsteer: Convert to platform_driver::remove_new() callback
  irqchip/imx-intmux: Convert to platform_driver::remove_new() callback
  irqchip/imgpdc: Convert to platform_driver::remove_new() callback
  irqchip: Add StarFive external interrupt controller
  dt-bindings: interrupt-controller: Add starfive,jh8100-intc
  arm64: dts: Add gpio_intc node for Amlogic-T7 SoCs
  irqchip/meson-gpio: Add support for Amlogic-T7 SoCs
  dt-bindings: interrupt-controller: Add support for Amlogic-T7 SoCs
  irqchip/vic: Fix a kernel-doc warning
  genirq: Wake interrupt threads immediately when changing affinity
  ...

Mitigation for RFDS requires RFDS_CLEAR capability which is enumerated
by MSR_IA32_ARCH_CAPABILITIES bit 27. If the host has it set, export it
to guests so that they can deploy the mitigation.

RFDS_NO indicates that the system is not vulnerable to RFDS, export it
to guests so that they don't deploy the mitigation unnecessarily. When
the host is not affected by X86_BUG_RFDS, but has RFDS_NO=0, synthesize
RFDS_NO to the guest.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>