- 06 Aug, 2018 18 commits
-
-
Eric Dumazet authored
[ Upstream commit 4672694b ] ip_frag_queue() might call pskb_pull() on one skb that is already in the fragment queue. We need to take care of possible truesize change, or we might have an imbalance of the netns frags memory usage. IPv6 is immune to this bug, because RFC5722, Section 4, amended by Errata ID 3089 states : When reassembling an IPv6 datagram, if one or more its constituent fragments is determined to be an overlapping fragment, the entire datagram (and any constituent fragments) MUST be silently discarded. Fixes: 158f323b ("net: adjust skb->truesize in pskb_expand_head()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit 56e2c94f ] We currently check current frags memory usage only when a new frag queue is created. This allows attackers to first consume the memory budget (default : 4 MB) creating thousands of frag queues, then sending tiny skbs to exceed high_thresh limit by 2 to 3 order of magnitude. Note that before commit 648700f7 ("inet: frags: use rhashtables for reassembly units"), work queue could be starved under DOS, getting no cpu cycles. After commit 648700f7, only the per frag queue timer can eventually remove an incomplete frag queue and its skbs. Fixes: b13d3cbf ("inet: frag: move eviction of queues to work queue") Signed-off-by:
Jann Horn <jannh@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Peter Oskolkov <posk@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 7e2556e4 ] syzbot found that the following sequence produces a LOCKDEP splat [1] ip link add bond10 type bond ip link add bond11 type bond ip link set bond11 master bond10 To fix this, we can use the already provided nest_level. This patch also provides correct nesting for dev->addr_list_lock [1] WARNING: possible recursive locking detected 4.18.0-rc6+ #167 Not tainted -------------------------------------------- syz-executor751/4439 is trying to acquire lock: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline] (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 but task is already holding lock: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline] (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&bond->stats_lock)->rlock); lock(&(&bond->stats_lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by syz-executor751/4439: #0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77 #1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline] #1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 #2: (____ptrval____) (rcu_read_lock){....}, at: bond_get_stats+0x0/0x560 include/linux/compiler.h:215 stack backtrace: CPU: 0 PID: 4439 Comm: syz-executor751 Not tainted 4.18.0-rc6+ #167 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_deadlock_bug kernel/locking/lockdep.c:1765 [inline] check_deadlock kernel/locking/lockdep.c:1809 [inline] validate_chain kernel/locking/lockdep.c:2405 [inline] __lock_acquire.cold.64+0x1fb/0x486 kernel/locking/lockdep.c:3435 lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:144 spin_lock include/linux/spinlock.h:310 [inline] bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 dev_get_stats+0x10f/0x470 net/core/dev.c:8316 bond_get_stats+0x232/0x560 drivers/net/bonding/bond_main.c:3432 dev_get_stats+0x10f/0x470 net/core/dev.c:8316 rtnl_fill_stats+0x4d/0xac0 net/core/rtnetlink.c:1169 rtnl_fill_ifinfo+0x1aa6/0x3fb0 net/core/rtnetlink.c:1611 rtmsg_ifinfo_build_skb+0xc8/0x190 net/core/rtnetlink.c:3268 rtmsg_ifinfo_event.part.30+0x45/0xe0 net/core/rtnetlink.c:3300 rtmsg_ifinfo_event net/core/rtnetlink.c:3297 [inline] rtnetlink_event+0x144/0x170 net/core/rtnetlink.c:4716 notifier_call_chain+0x180/0x390 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1735 call_netdevice_notifiers net/core/dev.c:1753 [inline] netdev_features_change net/core/dev.c:1321 [inline] netdev_change_features+0xb3/0x110 net/core/dev.c:7759 bond_compute_features.isra.47+0x585/0xa50 drivers/net/bonding/bond_main.c:1120 bond_enslave+0x1b25/0x5da0 drivers/net/bonding/bond_main.c:1755 bond_do_ioctl+0x7cb/0xae0 drivers/net/bonding/bond_main.c:3528 dev_ifsioc+0x43c/0xb30 net/core/dev_ioctl.c:327 dev_ioctl+0x1b5/0xcc0 net/core/dev_ioctl.c:493 sock_do_ioctl+0x1d3/0x3e0 net/socket.c:992 sock_ioctl+0x30d/0x680 net/socket.c:1093 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 __do_sys_ioctl fs/ioctl.c:708 [inline] __se_sys_ioctl fs/ioctl.c:706 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x440859 Code: e8 2c af 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc51a92878 EFLAGS: 00000213 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440859 RDX: 0000000020000040 RSI: 0000000000008990 RDI: 0000000000000003 RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000022d5880 R11: 0000000000000213 R12: 0000000000007390 R13: 0000000000401db0 R14: 0000000000000000 R15: 0000000000000000 Signed-off-by:
-
Boqun Feng authored
commit 35a2897c upstream. Steven Rostedt reported a potential race in RCU core because of swake_up(): CPU0 CPU1 ---- ---- __call_rcu_core() { spin_lock(rnp_root) need_wake = __rcu_start_gp() { rcu_start_gp_advanced() { gp_flags = FLAG_INIT } } rcu_gp_kthread() { swait_event_interruptible(wq, gp_flags & FLAG_INIT) { spin_lock(q->lock) *fetch wq->task_list here! * list_add(wq->task_list, q->task_list) spin_unlock(q->lock); *fetch old value of gp_flags here * spin_unlock(rnp_root) rcu_gp_kthread_wake() { swake_up(wq) { swait_active(wq) { list_empty(wq->task_list) } * return false * if (condition) * false * schedule(); In this case, a wakeup is missed, which could cause the rcu_gp_kthread waits for a long time. The reason of this is that we do a lockless swait_active() check in swake_up(). To fix this, we can either 1) add a smp_mb() in swake_up() before swait_active() to provide the proper order or 2) simply remove the swait_active() in swake_up(). The solution 2 not only fixes this problem but also keeps the swait and wait API as close as possible, as wake_up() doesn't provide a full barrier and doesn't do a lockless check of the wait queue either. Moreover, there are users already using swait_active() to do their quick checks for the wait queues, so it make less sense that swake_up() and swake_up_all() do this on their own. This patch then removes the lockless swait_active() check in swake_up() and swake_up_all(). Reported-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Boqun Feng <boqun.feng@gmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Krister Johansen <kjlx@templeofstupid.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170615041828.zk3a3sfyudm5p6nl@tardisSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: David Chen <david.chen@nutanix.com> Signed-off-by:
-
Andy Shevchenko authored
commit d68b42e3 upstream. In the same way as it's done in pinctrl-cherryview.c we would provide a readback TX buffer state. Fixes: 17fab473 ("pinctrl: intel: Set pin direction properly") Reported-by:
"Bourque, Francis" <francis.bourque@intel.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Anthony de Boer <adb@adb.ca> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 15ecbe94 ] Larry Brakmo proposal ( https://patchwork.ozlabs.org/patch/935233/ tcp: force cwnd at least 2 in tcp_cwnd_reduction) made us rethink about our recent patch removing ~16 quick acks after ECN events. tcp_enter_quickack_mode(sk, 1) makes sure one immediate ack is sent, but in the case the sender cwnd was lowered to 1, we do not want to have a delayed ack for the next packet we will receive. Fixes: 522040ea ("tcp: do not aggressively quick ack after ECN events") Signed-off-by:
Neal Cardwell <ncardwell@google.com> Cc: Lawrence Brakmo <brakmo@fb.com> Acked-by:
-
Yousuk Seung authored
[ Upstream commit f4c9f85f ] Refactor tcp_ecn_check_ce and __tcp_ecn_check_ce to accept struct sock* instead of tcp_sock* to clean up type casts. This is a pure refactor patch. Signed-off-by:
Yousuk Seung <ysseung@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 522040ea ] ECN signals currently forces TCP to enter quickack mode for up to 16 (TCP_MAX_QUICKACKS) following incoming packets. We believe this is not needed, and only sending one immediate ack for the current packet should be enough. This should reduce the extra load noticed in DCTCP environments, after congestion events. This is part 2 of our effort to reduce pure ACK packets. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 9a9c9b51 ] We want to add finer control of the number of ACK packets sent after ECN events. This patch is not changing current behavior, it only enables following change. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit a3893637 ] As explained in commit 9f9843a7 ("tcp: properly handle stretch acks in slow start"), TCP stacks have to consider how many packets are acknowledged in one single ACK, because of GRO, but also because of ACK compression or losses. We plan to add SACK compression in the following patch, we must therefore not call tcp_enter_quickack_mode() Signed-off-by:
-
Xiao Liang authored
[ Upstream commit 822fb18a ] When loading module manually, after call xenbus_switch_state to initializes the state of the netfront device, the driver state did not change so fast that may lead no dev created in latest kernel. This patch adds wait to make sure xenbus knows the driver is not in closed/unknown state. Current state: [vm]# ethtool eth0 Settings for eth0: Link detected: yes [vm]# modprobe -r xen_netfront [vm]# modprobe xen_netfront [vm]# ethtool eth0 Settings for eth0: Cannot get device settings: No such device Cannot get wake-on-lan settings: No such device Cannot get message level: No such device Cannot get link status: No such device No data available With the patch installed. [vm]# ethtool eth0 Settings for eth0: Link detected: yes [vm]# modprobe -r xen_netfront [vm]# modprobe xen_netfront [vm]# ethtool eth0 Settings for eth0: Link detected: yes Signed-off-by:
Xiao Liang <xiliang@redhat.com> Signed-off-by:
-
Neal Cardwell authored
[ Upstream commit 383d4709 ] For some very small BDPs (with just a few packets) there was a quantization effect where the target number of packets in flight during the super-unity-gain (1.25x) phase of gain cycling was implicitly truncated to a number of packets no larger than the normal unity-gain (1.0x) phase of gain cycling. This meant that in multi-flow scenarios some flows could get stuck with a lower bandwidth, because they did not push enough packets inflight to discover that there was more bandwidth available. This was really only an issue in multi-flow LAN scenarios, where RTTs and BDPs are low enough for this to be an issue. This fix ensures that gain cycling can raise inflight for small BDPs by ensuring that in PROBE_BW mode target inflight values with a super-unity gain are always greater than inflight values with a gain <= 1. Importantly, this applies whether the inflight value is calculated for use as a cwnd value, or as a target inflight value for the end of the super-unity phase in bbr_is_next_cycle_phase() (both need to be bigger to ensure we can probe with more packets in flight reliably). This is a candidate fix for stable releases. Fixes: 0f8782ea ("tcp_bbr: add BBR congestion control") Signed-off-by:
Priyaranjan Jha <priyarjha@google.com> Reviewed-by:
-
Eugeniy Paltsev authored
[ Upstream commit 9939a46d ] As for today STMMAC_ALIGN macro (which is used to align DMA stuff) relies on L1 line length (L1_CACHE_BYTES). This isn't correct in case of system with several cache levels which might have L1 cache line length smaller than L2 line. This can lead to sharing one cache line between DMA buffer and other data, so we can lose this data while invalidate DMA buffer before DMA transaction. Fix that by using SMP_CACHE_BYTES instead of L1_CACHE_BYTES for aligning. Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
-
Anton Vasilyev authored
[ Upstream commit b0753408 ] mdio_mux_iproc_probe() uses platform_set_drvdata() to store md pointer in device, whereas mdio_mux_iproc_remove() restores md pointer by dev_get_platdata(&pdev->dev). This leads to wrong resources release. The patch replaces getter to platform_get_drvdata. Fixes: 98bc865a ("net: mdio-mux: Add MDIO mux driver for iProc SoCs") Signed-off-by:
Anton Vasilyev <vasilyev@ispras.ru> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit 136f55f6 ] As long the bh tasklet isn't scheduled once, no packet from the rx path will be handled. Since the tx path also schedule the same tasklet this situation only persits until the first packet transmission. So fix this issue by scheduling the tasklet after link reset. Link: https://github.com/raspberrypi/linux/issues/2617 Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet") Suggested-by:
Floris Bos <bos@je-eigen-domein.nl> Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
tangpengpeng authored
[ Upstream commit 7f3fc7dd ] If we enable or disable xgbe flow-control by ethtool , it does't work.Because the parameter is not properly assigned,so we need to adjust the assignment order of the parameters. Fixes: c1ce2f77 ("amd-xgbe: Fix flow control setting logic") Signed-off-by:
tangpengpeng <tangpengpeng@higon.com> Acked-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Gal Pressman authored
[ Upstream commit 101f0cd4 ] UBSAN triggers the following undefined behaviour warnings: [...] [ 13.236124] UBSAN: Undefined behaviour in drivers/net/ethernet/amazon/ena/ena_eth_com.c:468:22 [ 13.240043] shift exponent 64 is too large for 64-bit type 'long long unsigned int' [...] [ 13.744769] UBSAN: Undefined behaviour in drivers/net/ethernet/amazon/ena/ena_eth_com.c:373:4 [ 13.748694] shift exponent 64 is too large for 64-bit type 'long long unsigned int' [...] When splitting the address to high and low, GENMASK_ULL is used to generate a bitmask with dma_addr_bits field from io_sq (in ena_com_prepare_tx and ena_com_add_single_rx_desc). The problem is that dma_addr_bits is not initialized with a proper value (besides being cleared in ena_com_create_io_queue). Assign dma_addr_bits the correct value that is stored in ena_dev when initializing the SQ. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Gal Pressman <pressmangal@gmail.com> Signed-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit 9fc12023 ] Remove BUG_ON() from fib_compute_spec_dst routine and check in_dev pointer during flowi4 data structure initialization. fib_compute_spec_dst routine can be run concurrently with device removal where ip_ptr net_device pointer is set to NULL. This can happen if userspace enables pkt info on UDP rx socket and the device is removed while traffic is flowing Fixes: 35ebf65e ("ipv4: Create and use fib_compute_spec_dst() helper") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
- 03 Aug, 2018 22 commits
-
-
Greg Kroah-Hartman authored
-
Michal Vokáč authored
commit 9bb2289f upstream. Implement adjust_link function that allows to overwrite default CPU port setting using fixed-link device tree subnode. Signed-off-by:
Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Michal Vokáč authored
commit 218bbea1 upstream. Add support for the four-port variant of the Qualcomm QCA833x switch. The CPU port default link settings can be reconfigured using a fixed-link sub-node. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Michal Vokáč authored
commit eee1fe64 upstream. When a port is brought up/down do not enable/disable only the TXMAC but the RXMAC as well. This is essential for the CPU port to work. Fixes: 6b93fb46 ("net-next: dsa: add new driver for qca8xxx family") Signed-off-by:
-
Michal Vokáč authored
commit 79a4ed4f upstream. By default autonegotiation is enabled to configure MAC on all ports. For the CPU port autonegotiation can not be used so we need to set some sensible defaults manually. This patch forces the default setting of the CPU port to 1000Mbps/full duplex which is the chip maximum capability. Also correct size of the bit field used to configure link speed. Fixes: 6b93fb46 ("net-next: dsa: add new driver for qca8xxx family") Signed-off-by:
-
Leon Romanovsky authored
commit 940efcc8 upstream. Flows can be created on UD and RAW_PACKET QP types. Attempts to provide other QP types as an input causes to various unpredictable failures. The reason is that in order to support all various types (e.g. XRC), we are supposed to use real_qp handle and not qp handle and expect to driver/FW to fail such (XRC) flows. The simpler and safer variant is to ban all QP types except UD and RAW_PACKET, instead of relying on driver/FW. Cc: <stable@vger.kernel.org> # 3.11 Fixes: 436f2ad0 ("IB/core: Export ib_create/destroy_flow through uverbs") Cc: syzkaller <syzkaller@googlegroups.com> Reported-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Theodore Ts'o authored
commit 8d5a803c upstream. With commit 044e6e3d: "ext4: don't update checksum of new initialized bitmaps" the buffer valid bit will get set without actually setting up the checksum for the allocation bitmap, since the checksum will get calculated once we actually allocate an inode or block. If we are doing this, then we need to (re-)check the verified bit after we take the block group lock. Otherwise, we could race with another process reading and verifying the bitmap, which would then complain about the checksum being invalid. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1780137Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by:
-
Theodore Ts'o authored
commit 362eca70 upstream. The inline data code was updating the raw inode directly; this is problematic since if metadata checksums are enabled, ext4_mark_inode_dirty() must be called to update the inode's checksum. In addition, the jbd2 layer requires that get_write_access() be called before the metadata buffer is modified. Fix both of these problems. https://bugzilla.kernel.org/show_bug.cgi?id=200443Signed-off-by:
-
Linus Torvalds authored
commit 01cfb793 upstream. Anatoly Trosinenko reports that a corrupted squashfs image can cause a kernel oops. It turns out that squashfs can end up being confused about negative fragment lengths. The regular squashfs_read_data() does check for negative lengths, but squashfs_read_metadata() did not, and the fragment size code just blindly trusted the on-disk value. Fix both the fragment parsing and the metadata reading code. Reported-by:
Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Phillip Lougher <phillip@squashfs.org.uk> Cc: stable@kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Theodore Ts'o authored
commit 81e69df3 upstream. Fedora has integrated the jitter entropy daemon to work around slow boot problems, especially on VM's that don't support virtio-rng: https://bugzilla.redhat.com/show_bug.cgi?id=1572944 It's understandable why they did this, but the Jitter entropy daemon works fundamentally on the principle: "the CPU microarchitecture is **so** complicated and we can't figure it out, so it *must* be random". Yes, it uses statistical tests to "prove" it is secure, but AES_ENCRYPT(NSA_KEY, COUNTER++) will also pass statistical tests with flying colors. So if RDRAND is available, mix it into entropy submitted from userspace. It can't hurt, and if you believe the NSA has backdoored RDRAND, then they probably have enough details about the Intel microarchitecture that they can reverse engineer how the Jitter entropy daemon affects the microarchitecture, and attack its output stream. And if RDRAND is in fact an honest DRNG, it will immeasurably improve on what the Jitter entropy daemon might produce. This also provides some protection against someone who is able to read or set the entropy seed file. Signed-off-by:
-
José Roberto de Souza authored
[ Upstream commit 4f212e40 ] To comply with eDP1.4a this bit should be set when enabling PSR2. Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
[ Upstream commit 90db5c82 ] The annotations there are wrong as warned: drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:107:35: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: warning: incorrect type in assignment (different base types) drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: expected unsigned short [unsigned] [short] <noident> drivers/media/radio/si470x/radio-si470x-i2c.c:129:24: got restricted __be16 [usertype] <noident> drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 drivers/media/radio/si470x/radio-si470x-i2c.c:163:39: warning: cast to restricted __be16 Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Shivasharan S authored
[ Upstream commit 3239b8cd ] Hardware could time out Fastpath IOs one second earlier than the timeout provided by the host. For non-RAID devices, driver provides timeout value based on OS provided timeout value. Under certain scenarios, if the OS provides a timeout value of 1 second, due to above behavior hardware will timeout immediately. Increase timeout value for non-RAID fastpath IOs by 1 second. Signed-off-by:
Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Xose Vazquez Perez authored
[ Upstream commit 37b37d26 ] SGI/TP9100 is not an RDAC array: ^^^ https://git.opensvc.com/gitweb.cgi?p=multipath-tools/.git;a=blob;f=libmultipath/hwtable.c;h=88b4700beb1d8940008020fbe4c3cd97d62f4a56;hb=HEAD#l235 This partially reverts commit 35204772 ("[SCSI] scsi_dh_rdac : Consolidate rdac strings together") [mkp: fixed up the new entries to align with rest of struct] Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com> Cc: Hannes Reinecke <hare@suse.de> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: DM ML <dm-devel@redhat.com> Signed-off-by:
Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by:
-
Suman Anna authored
[ Upstream commit b7e1e685 ] The OMAP3 ISP driver manages its MMU mappings through the IOMMU-aware ARM DMA backend. The current code creates a dma_iommu_mapping and attaches this to the ISP device, but never detaches the mapping in either the probe failure paths or the driver remove path resulting in an unbalanced mapping refcount and a memory leak. Fix this properly. Reported-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Suman Anna <s-anna@ti.com> Tested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Tudor-Dan Ambarus authored
[ Upstream commit ad2fdcdf ] In crypto_authenc_setkey we save pointers to the authenc keys in a local variable of type struct crypto_authenc_keys and we don't zeroize it after use. Fix this and don't leak pointers to the authenc keys. Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Tudor-Dan Ambarus authored
[ Upstream commit 31545df3 ] In crypto_authenc_esn_setkey we save pointers to the authenc keys in a local variable of type struct crypto_authenc_keys and we don't zeroize it after use. Fix this and don't leak pointers to the authenc keys. Signed-off-by:
-
Dominik Bozek authored
[ Upstream commit 5d111f51 ] wait_for_connected() wait till a port change status to USB_PORT_STAT_CONNECTION, but this is not possible if the port is unpowered. The loop will only exit at timeout. Such case take place if an over-current incident happen while system is in S3. Then during resume wait_for_connected() will wait 2s, which may be noticeable by the user. Signed-off-by:
Dominik Bozek <dominikx.bozek@intel.com> Signed-off-by:
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by:
-
Michal Simek authored
[ Upstream commit ece97f3a ] simpleImage generation was broken for some time. This patch is fixing steps how simpleImage.*.ub file is generated. Steps are objdump of vmlinux and create .ub. Also make sure that there is striped elf version with .strip suffix. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit c1c734cb ] As part of bringup I ended up wanting to call an earlycon driver by a name that was exactly 16-bytes big, specifically "qcom_geni_serial". Unfortunately, when I tried this I found that things compiled just fine. They just didn't work. Specifically the compiler felt perfectly justified in initting the ".name" field of "struct earlycon_id" with the full 16-bytes and just skipping the '\0'. Needless to say, that behavior didn't seem ideal, but I guess someone must have allowed it for a reason. One way to fix this is to shorten the name field to 15 bytes and then add an extra byte after that nobody touches. This should always be initted to 0 and we're golden. There are, of course, other ways to fix this too. We could audit all the users of the "name" field and make them stop at both null termination or at 16 bytes. We could also just make the name field much bigger so that we're not likely to run into this. ...but both seem like we'll just hit the bug again. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
NeilBrown authored
[ Upstream commit d8caf662 ] ldlm_lock_create() gets a resource, but don't put it on all failure paths. It should. Signed-off-by:
NeilBrown <neilb@suse.com> Reviewed-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
-
James Simmons authored
[ Upstream commit 1b60f6df ] In ll_xattr_set_common() detect the removexattr() case correctly by testing for a NULL value as well as XATTR_REPLACE. Signed-off-by:
John L. Hammond <john.hammond@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-10787 Reviewed-on: https://review.whamcloud.com/Reviewed-by:
Dmitry Eremin <dmitry.eremin@intel.com> Reviewed-by:
James Simmons <uja.ornl@yahoo.com> Signed-off-by:
-
