- 05 Oct, 2014 40 commits
-
-
Paulo Zanoni authored
commit d6dd6843 upstream. If we're runtime suspended and try to use the plane interfaces, we will get a lot of WARNs saying we did the wrong thing. We need to get runtime PM references to pin the objects, and to change the fences. The pin functions are the ideal places for this, but intel_crtc_cursor_set_obj() doesn't call them, so we also have to add get/put calls inside it. There is no problem if we runtime suspend right after these functions are finished, because the registers written are forwarded to system memory. Note: for a complete fix of the cursor-dpms test case, we also need the patch named "drm/i915: Don't try to enable cursor from setplane when crtc is disabled". v2: - Narrow the put/get calls on intel_crtc_cursor_set_obj() (Daniel) v3: - Make get/put also surround the fence and unpin calls (Daniel and Ville). - Merge all the plane changes into a single patch since they're the same fix. - Add the comment requested by Daniel. v4: - Remove spurious whitespace (Ville). v5: - Remove intel_crtc_update_cursor() chunk since Ville did an equivalent fix in another patch (Ville). v6: - Remove unpin chunk: it will be on a separate patch (Ville, Chris, Daniel). v7: - Same thing, new color. Testcase: igt/pm_rpm/cursor Testcase: igt/pm_rpm/cursor-dpms Testcase: igt/pm_rpm/legacy-planes Testcase: igt/pm_rpm/legacy-planes-dpms Testcase: igt/pm_rpm/universal-planes Testcase: igt/pm_rpm/universal-planes-dpms Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81645 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82603Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Imre Deak authored
commit 1a125d8a upstream. Atm we may retrain the DP link even if the CRTC is inactive through HPD work->intel_dp_check_link_status(). This in turn can lock up the PHY (at least on BYT), since the DP port is disabled. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81948Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Ville Syrjälä authored
commit 208bf9fd upstream. intel_enable_pipe_a() gets called with all the modeset locks already held (by drm_modeset_lock_all()), so trying to grab the same locks using another drm_modeset_acquire_ctx is going to fail miserably. Move most of the drm_modeset_acquire_ctx handling (init/drop/fini) out from intel_{get,release}_load_detect_pipe() into the callers (intel_{crt,tv}_detect()). Only the actual locking and backoff handling is left in intel_get_load_detect_pipe(). And in intel_enable_pipe_a() we just share the mode_config.acquire_ctx from drm_modeset_lock_all() which is already holding all the relevant locks. It's perfectly legal to lock the same ww_mutex multiple times using the same ww_acquire_ctx. drm_modeset_lock() will convert the returned -EALREADY into 0, so the caller doesn't need to do antyhing special. Fixes a hang on resume on my 830. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Ville Syrjälä authored
commit a459249c upstream. During suspend we turn off the crtcs, but leave the staged config in place so that we can restore the display(s) to their previous state on resume. During resume when we attempt to apply the force pipe A quirk we use the load detect mechanism. That doesn't check whether there was an already staged configuration for the crtc since that's not even possible during normal runtime load detection. But during resume it is possible, and if we just blindly go and overwrite the staged crtc configuration for the load detection we can no longer restore the display to the correct state. Even worse, we don't even clear all the staged connector->encoder->crtc links so we may end up using a cloned setup for the load detection, and after we're done we just clear the links related to the VGA output leaving the links for the other outputs in place. This will eventually result in calling intel_set_mode() with mode==NULL but with valid connector->encoder->crtc links which will result in dereferencing the NULL mode since the code thinks it will have to a modeset. To avoid these problems don't use any crtc with new_enabled==true for load detection. Signed-off-by:
-
Filipe Brandenburger authored
commit bfcfd44c upstream. The guard was introduced in commit ea1a8217 ("xattr: guard against simultaneous glibc header inclusion") but it is using #ifdef to check for a define that is either set to 1 or 0. Fix it to use #if instead. * Without this patch: $ { echo "#include <sys/xattr.h>"; echo "#include <linux/xattr.h>"; } | gcc -E -Iinclude/uapi - >/dev/null include/uapi/linux/xattr.h:19:0: warning: "XATTR_CREATE" redefined [enabled by default] #define XATTR_CREATE 0x1 /* set value, fail if attr already exists */ ^ /usr/include/x86_64-linux-gnu/sys/xattr.h:32:0: note: this is the location of the previous definition #define XATTR_CREATE XATTR_CREATE ^ * With this patch: $ { echo "#include <sys/xattr.h>"; echo "#include <linux/xattr.h>"; } | gcc -E -Iinclude/uapi - >/dev/null (no warnings) Signed-off-by:
Filipe Brandenburger <filbranden@google.com> Acked-by:
Serge E. Hallyn <serge.hallyn@ubuntu.com> Cc: Allan McRae <allan@archlinux.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Benjamin Tissoires authored
commit 5abfe85c upstream. Commit "HID: logitech: perform bounds checking on device_id early enough" unfortunately leaks some errors to dmesg which are not real ones: - if the report is not a DJ one, then there is not point in checking the device_id - the receiver (index 0) can also receive some notifications which can be safely ignored given the current implementation Move out the test regarding the report_id and also discards printing errors when the receiver got notified. Fixes: ad3e14d7Reported-and-tested-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jiri Kosina authored
commit c54def7b upstream. The report passed to us from transport driver could potentially be arbitrarily large, therefore we better sanity-check it so that magicmouse_emit_touch() gets only valid values of raw_id. Reported-by:
Steven Vittitoe <scvitti@google.com> Signed-off-by:
-
Jiri Kosina authored
commit 844817e4 upstream. The report passed to us from transport driver could potentially be arbitrarily large, therefore we better sanity-check it so that raw_data that we hold in picolcd_pending structure are always kept within proper bounds. Reported-by:
-
Toshiaki Makita authored
commit e15693ef upstream. cfq_group_service_tree_add() is applying new_weight at the beginning of the function via cfq_update_group_weight(). This actually allows weight to change between adding it to and subtracting it from children_weight, and triggers WARN_ON_ONCE() in cfq_group_service_tree_del(), or even causes oops by divide error during vfr calculation in cfq_group_service_tree_add(). The detailed scenario is as follows: 1. Create blkio cgroups X and Y as a child of X. Set X's weight to 500 and perform some I/O to apply new_weight. This X's I/O completes before starting Y's I/O. 2. Y starts I/O and cfq_group_service_tree_add() is called with Y. 3. cfq_group_service_tree_add() walks up the tree during children_weight calculation and adds parent X's weight (500) to children_weight of root. children_weight becomes 500. 4. Set X's weight to 1000. 5. X starts I/O and cfq_group_service_tree_add() is called with X. 6. cfq_group_service_tree_add() applies its new_weight (1000). 7. I/O of Y completes and cfq_group_service_tree_del() is called with Y. 8. I/O of X completes and cfq_group_service_tree_del() is called with X. 9. cfq_group_service_tree_del() subtracts X's weight (1000) from children_weight of root. children_weight becomes -500. This triggers WARN_ON_ONCE(). 10. Set X's weight to 500. 11. X starts I/O and cfq_group_service_tree_add() is called with X. 12. cfq_group_service_tree_add() applies its new_weight (500) and adds it to children_weight of root. children_weight becomes 0. Calcularion of vfr triggers oops by divide error. weight should be updated right before adding it to children_weight. Reported-by:
Ruki Sekiya <sekiya.ruki@lab.ntt.co.jp> Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Clemens Ladisch authored
commit a9960e6a upstream. The calculated frame size was wrong because snd_pcm_format_physical_width() actually returns the number of bits, not bytes. Use snd_pcm_format_size() instead, which not only returns bytes, but also simplifies the calculation. Fixes: 8bea869c ("ALSA: PCM midlevel: improve fifo_size handling") Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Huacai Chen authored
commit 8245b363 upstream. Lemote A1004 is already added in commit a2dd933d (ALSA: hda - Add fixup name lookup for CX5051 and 5066 codecs), but Lemote A1205 has missing. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
-
Takashi Iwai authored
commit 7a9744cb upstream. When a driver is set up without the jack detection explicitly (either by passing a model option or via a specific fixup), the pin powermap of IDT/STAC codecs is set up wrongly, resulting in the silence output. It's because of a logic failure in stac_init_power_map(). It tries to avoid creating a callback for the pins that have other auto-hp and auto-mic callbacks, but the check is done in a wrong way at a wrong time. The stac_init_power_map() should be called after creating other jack detection ctls, and the jack callback should be created only for jack-detectable widgets. This patch fixes the check in stac_init_power_map() and its callee at the right place, after snd_hda_gen_build_controls(). Reported-by:
Adam Richter <adam_richter2004@yahoo.com> Signed-off-by:
-
Takashi Iwai authored
commit acf08081 upstream. ALC1150 codec seems to need the COEF- and PLL-setups just like its compatible ALC882 codec. Some machines (e.g. SunMicro X10SAT) show the problem like too low output volumes unless the COEF setup is applied. Reported-and-tested-by:
Dana Goyette <danagoyette@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit ff50479a upstream. Acer Aspire 3830TG with CX20588 codec has a digital built-in mic that has the same problem like many others, the inverted signal in stereo. Apply the same fixup to this machine, too. Signed-off-by:
-
Takashi Sakamoto authored
commit 65845f29 upstream. In IEC 61883-6, one data block transfers one event. In ALSA, the event equals one PCM frame, hence one data block transfers one PCM frame. But Dice has a quirk at higher sampling rate (176.4/192.0 kHz) that one data block transfers two PCM frames. Commit 10550bea ("ALSA: dice/firewire-lib: Keep dualwire mode but obsolete CIP_HI_DUALWIRE") moved some codes related to this quirk into Dice driver. But the commit forgot to add arrangements for PCM period interrupts and DMA pointer updates. As a result, Dice driver cannot work correctly at higher sampling rate. This commit adds 'double_pcm_frames' parameter to amdtp structure for this quirk. When this parameter is set, PCM period interrupts and DMA pointer updates occur at double speed than in IEC 61883-6. Reported-by:
Daniel Robbins <drobbins@funtoo.org> Fixes: 10550bea ("ALSA: dice/firewire-lib: Keep dualwire mode but obsolete CIP_HI_DUALWIRE") Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
Takashi Sakamoto authored
commit 1033eb5b upstream. The channel mapping is initialized by amdtp_stream_set_parameters(), however Dice driver set it before calling this function. Furthermore, the setting is wrong because the index is the value of array, and vice versa. This commit moves codes for channel mapping after the function and set it correctly. Reported-by:
-
Clemens Ladisch authored
commit ddc64b27 upstream. snd_info_get_line() documents that its last parameter must be one less than the buffer size, but this API design guarantees that (literally) every caller gets it wrong. Just change this parameter to have its obvious meaning. Reported-by:
Tommi Rantala <tt.rantala@gmail.com> Signed-off-by:
-
Will Deacon authored
commit 27d7ff27 upstream. I'm not sure what I was on when I wrote this, but when iterating over the hardware watchpoint array (hbp_watch_array), our index is off by ARM_MAX_BRP, so we walk off the end of our thread_struct... ... except, a dodgy condition in the loop means that it never executes at all (bp cannot be NULL). This patch fixes the code so that we remove the bp check and use the correct index for accessing the watchpoint structures. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Josef Bacik authored
commit 4ce97dbf upstream. Epoll on trace_pipe can sometimes hang in a weird case. If the ring buffer is empty when we set waiters_pending but an event shows up exactly at that moment we can miss being woken up by the ring buffers irq work. Since ring_buffer_empty() is inherently racey we will sometimes think that the buffer is not empty. So we don't get woken up and we don't think there are any events even though there were some ready when we added the watch, which makes us hang. This patch fixes this by making sure that we are actually on the wait list before we set waiters_pending, and add a memory barrier to make sure ring_buffer_empty() is going to be correct. Link: http://lkml.kernel.org/p/1408989581-23727-1-git-send-email-jbacik@fb.com Cc: Martin Lau <kafai@fb.com> Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 39b5552c upstream. In __ftrace_replace_code(), when converting the call to a nop in a function it needs to compare against the "curr" (current) value of the ftrace ops, and not the "new" one. It currently does not affect x86 which is the only arch to do the trampolines with function graph tracer, but when other archs that do depend on this code implement the function graph trampoline, it can crash. Here's an example when ARM uses the trampolines (in the future): ------------[ cut here ]------------ WARNING: CPU: 0 PID: 9 at kernel/trace/ftrace.c:1716 ftrace_bug+0x17c/0x1f4() Modules linked in: omap_rng rng_core ipv6 CPU: 0 PID: 9 Comm: migration/0 Not tainted 3.16.0-test-10959-gf0094b28-dirty #52 [<c02188f4>] (unwind_backtrace) from [<c021343c>] (show_stack+0x20/0x24) [<c021343c>] (show_stack) from [<c095a674>] (dump_stack+0x78/0x94) [<c095a674>] (dump_stack) from [<c02532a0>] (warn_slowpath_common+0x7c/0x9c) [<c02532a0>] (warn_slowpath_common) from [<c02532ec>] (warn_slowpath_null+0x2c/0x34) [<c02532ec>] (warn_slowpath_null) from [<c02cbac4>] (ftrace_bug+0x17c/0x1f4) [<c02cbac4>] (ftrace_bug) from [<c02cc44c>] (ftrace_replace_code+0x80/0x9c) [<c02cc44c>] (ftrace_replace_code) from [<c02cc658>] (ftrace_modify_all_code+0xb8/0x164) [<c02cc658>] (ftrace_modify_all_code) from [<c02cc718>] (__ftrace_modify_code+0x14/0x1c) [<c02cc718>] (__ftrace_modify_code) from [<c02c7244>] (multi_cpu_stop+0xf4/0x134) [<c02c7244>] (multi_cpu_stop) from [<c02c6e90>] (cpu_stopper_thread+0x54/0x130) [<c02c6e90>] (cpu_stopper_thread) from [<c0271cd4>] (smpboot_thread_fn+0x1ac/0x1bc) [<c0271cd4>] (smpboot_thread_fn) from [<c026ddf0>] (kthread+0xe0/0xfc) [<c026ddf0>] (kthread) from [<c020f318>] (ret_from_fork+0x14/0x20) ---[ end trace dc9ce72c5b617d8f ]--- [ 65.047264] ftrace failed to modify [<c0208580>] asm_do_IRQ+0x10/0x1c [ 65.054070] actual: 85:1b:00:eb Fixes: 7413af1f "ftrace: Make get_ftrace_addr() and get_ftrace_addr_old() global" Signed-off-by:
-
Fan Du authored
commit 979bbf7b upstream. In block write mode, when encapsulating dma_buffer, first element is 'command', the rest is data buffer, so only copy actual data buffer starting from block[1] with the size indicating by block[0]. Signed-off-by:
Fan Du <fan.du@intel.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
addy ke authored
commit b4a7bd7a upstream. I2C_CLKDIV register descripted in the previous version of RK3x chip manual is incorrect. Plus 1 is required. The correct formula: - T(SCL_HIGH) = T(PCLK) * (CLKDIVH + 1) * 8 - T(SCL_LOW) = T(PCLK) * (CLKDIVL + 1) * 8 - (SCL Divsor) = 8 * ((CLKDIVL + 1) + (CLKDIVH + 1)) - SCL = PCLK / (CLK Divsor) It will be updated to the latest version of chip manual. Signed-off-by:
Addy Ke <addy.ke@rock-chips.com> Reviewed-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
-
Sergei Shtylyov authored
commit 938916fb upstream. Bits 8-31 of all registers reflect the value of bits 0-7 on reads and should be 0 on writes, according to the manuals. RCAR_IRQ_ACK_{RECV|SEND} macros have all 1's in bits 8-31, thus going against the manuals, so fix them. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
commit dd318b0d upstream. Sometimes the MNR and MST interrupts happen simultaneously (stop automatically follows NACK, according to the manuals) and in such case the ID_NACK flag isn't set since the MST interrupt handling precedes MNR and all interrupts are cleared and disabled then, so that MNR interrupt is never noticed -- this causes NACK'ed transfers to be falsely reported as successful. Exchanging MNR and MST handlers fixes this issue, however the MNR bit somehow gets set again even after being explicitly cleared, so I decided to completely suppress handling of all disabled interrupts (which is a good thing anyway)... Signed-off-by:
-
Sergei Shtylyov authored
commit 91bfe298 upstream. This reverts commit 150b8be3. The I2C core's per-adapter locks can't protect from IRQs, so the driver still needs a spinlock to protect the register accesses. Signed-off-by:
-
Simon Lindgren authored
commit 6721f28a upstream. There is a race condition in at91_do_twi_xfer when signals arrive. If a signal is recieved while waiting for a transfer to complete wait_for_completion_interruptible_timeout() will return -ERESTARTSYS. This is not handled correctly resulting in interrupts still being enabled and a transfer being in flight when we return. Symptoms include a range of oopses and bus lockups. Oopses can happen when the transfer completes because the interrupt handler will corrupt the stack. If a new transfer is started before the interrupt fires the controller will start a new transfer in the middle of the old one, resulting in confused slaves and a locked bus. To avoid this, use wait_for_completion_io_timeout instead so that we don't have to deal with gracefully shutting down the transfer and disabling the interrupts. Signed-off-by:
Simon Lindgren <simon@aqwary.com> Acked-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
-
Marek Roszko authored
commit 75b81f33 upstream. The driver was not bound checking the received length byte to ensure it was within the the buffer size that is allocated for SMBus blocks. This resulted in buffer overflows whenever an invalid length byte was received. It also failed to ensure the length byte was not zero. If it received zero, it would end up in an infinite loop as the at91_twi_read_next_byte function returned immediately without allowing RHR to be read to clear the RXRDY interrupt. Tested agaisnt a SMBus compliant battery. Signed-off-by:
Marek Roszko <mark.roszko@gmail.com> Acked-by:
-
Chen-Yu Tsai authored
commit 0ce4bc1d upstream. The "clock-frequency" DT property is listed as optional, However, the current code stores the return value of of_property_read_u32 in the return code of mv64xxx_of_config, but then forgets to clear it after setting the default value of "clock-frequency". It is then passed out to the main probe function, resulting in a probe failure when "clock-frequency" is missing. This patch checks and then throws away the return value of of_property_read_u32, instead of storing it and having to clear it afterwards. This issue was discovered after the property was removed from all sunxi DTs. Fixes: 4c730a06 ("i2c: mv64xxx: Set bus frequency to 100kHz if clock-frequency is not provided") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
addy ke authored
commit 5da4309f upstream. In rk3x SOC, the I2C controller can receive/transmit up to 32 bytes data in one chunk, so the size of data to be write/read to/from TXDATAx/RXDATAx must be less than or equal 32 bytes at a time. Tested on rk3288-pinky board, elan receive 158 bytes data. Signed-off-by:
Max Schwarz <max.schwarz@online.de> Reviewed-by:
-
Pranavkumar Sawargaonkar authored
commit f6edbbf3 upstream. X-Gene u-boot runs in EL2 mode with MMU enabled hence we might have stale EL2 tlb enteris when we enable EL2 MMU on each host CPU. This can happen on any ARM/ARM64 board running bootloader in Hyp-mode (or EL2-mode) with MMU enabled. This patch ensures that we flush all Hyp-mode (or EL2-mode) TLBs on each host CPU before enabling Hyp-mode (or EL2-mode) MMU. Tested-by:
Mark Rutland <mark.rutland@arm.com> Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by:
Anup Patel <anup.patel@linaro.org> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
Christoffer Dall authored
commit 05e0127f upstream. The architecture specifies that when the processor wakes up from a WFE or WFI instruction, the instruction is considered complete, however we currrently return to EL1 (or EL0) at the WFI/WFE instruction itself. While most guests may not be affected by this because their local exception handler performs an exception returning setting the event bit or with an interrupt pending, some guests like UEFI will get wedged due this little mishap. Simply skip the instruction when we have completed the emulation. Acked-by:
-
Sudeep Holla authored
commit 3d8afe30 upstream. The arm64 interrupt migration code on cpu offline calls irqchip.irq_set_affinity() with the argument force=true. Originally this argument had no effect because it was not used by any interrupt chip driver and there was no semantics defined. This changed with commit 01f8fa4f ("genirq: Allow forcing cpu affinity of interrupts") which made the force argument useful to route interrupts to not yet online cpus without checking the target cpu against the cpu online mask. The following commit ffde1de6 ("irqchip: gic: Support forced affinity setting") implemented this for the GIC interrupt controller. As a consequence the cpu offline irq migration fails if CPU0 is offlined, because CPU0 is still set in the affinity mask and the validation against cpu online mask is skipped to the force argument being true. The following first_cpu(mask) selection always selects CPU0 as the target. Commit 601c9421("arm64: use cpu_online_mask when using forced irq_set_affinity") intended to fix the above mentioned issue but introduced another issue where affinity can be migrated to a wrong CPU due to unconditional copy of cpu_online_mask. As with for arm, solve the issue by calling irq_set_affinity() with force=false from the CPU offline irq migration code so the GIC driver validates the affinity mask against CPU online mask and therefore removes CPU0 from the possible target candidates. Also revert the changes done in the commit 601c9421 as it's no longer needed. Tested on Juno platform. Fixes: 601c9421("arm64: use cpu_online_mask when using forced irq_set_affinity") Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
-
Will Deacon authored
commit eb35bdd7 upstream. Nathan reports that we leak TLS information from the parent context during an exec, as we don't clear the TLS registers when flushing the thread state. This patch updates the flushing code so that we: (1) Unconditionally zero the tpidr_el0 register (since this is fully context switched for native tasks and zeroed for compat tasks) (2) Zero the tp_value state in thread_info before clearing the tpidrr0_el0 register for compat tasks (since this is only writable by the set_tls compat syscall and therefore not fully switched). A missing compiler barrier is also added to the compat set_tls syscall. Acked-by:
Nathan Lynch <Nathan_Lynch@mentor.com> Reported-by:
-
Lothar Waßmann authored
commit fa97d2f7 upstream. The VPU on i.MX53 has two distinct clocks for register access and internal function. Signed-off-by:
Lothar Waßmann <LW@KARO-electronics.de> Fixes: fbf970f6 ("ARM: dts: mx53qsb: Enable VPU support") Signed-off-by:
Shawn Guo <shawn.guo@freescale.com> Signed-off-by:
-
Bill Pringlemeir authored
commit 0aa4dcb5 upstream. Previous version had an extra 'fsl' which made the pins not match any entry. The console message, vf610-pinctrl 40048000.iomuxc: no fsl,pins property in node \ /soc/aips-bus@40000000/iomuxc@40048000/vf610-twr/esdhc1grp is displayed without the fix. The prior version would generally work as u-boot sets the pins properly for sdhc. This change allows Linux sdhc use even if u-boot is built without sdhc support. Signed-off-by:
Bill Pringlemeir <bpringlemeir@nbsps.com> Acked-by:
Stefan Agner <stefan@agner.ch> Fixes: 0517fe6a ("ARM: dts: vf610-twr: Add support for sdhc1") Signed-off-by:
-
Shawn Guo authored
commit 59d05b51 upstream. After the suspend routine running in OCRAM puts DDR into self-refresh, it will access IOMUXC block to float DDR IO for power saving. A TLB missing of IOMUXC base address may happen in this case, and triggers an access to DDR, and thus hangs the system. The failure is discovered by running suspend/resume on a Cubox-i board. Though the issue is not Cubox-i specific, it can be hit the on the board quite easily with the 3.15 or 3.16 kernel. Fix the issue with a dummy access to IOMUXC block at the beginning of suspend routine, so that the address translation can be filled into TLB before DDR is put into self-refresh. Signed-off-by:
Anson Huang <Anson.Huang@freescale.com> Signed-off-by:
-
Jeff Moyer authored
commit 2ff396be upstream. We ran into a case on ppc64 running mariadb where io_getevents would return zeroed out I/O events. After adding instrumentation, it became clear that there was some missing synchronization between reading the tail pointer and the events themselves. This small patch fixes the problem in testing. Thanks to Zach for helping to look into this, and suggesting the fix. Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Benjamin LaHaise <bcrl@kvack.org> Signed-off-by:
-
Benjamin LaHaise authored
commit d856f32a upstream. As reported by Dan Aloni, commit f8567a38 ("aio: fix aio request leak when events are reaped by userspace") introduces a regression when user code attempts to perform io_submit() with more events than are available in the ring buffer. Reverting that commit would reintroduce a regression when user space event reaping is used. Fixing this bug is a bit more involved than the previous attempts to fix this regression. Since we do not have a single point at which we can count events as being reaped by user space and io_getevents(), we have to track event completion by looking at the number of events left in the event ring. So long as there are as many events in the ring buffer as there have been completion events generate, we cannot call put_reqs_available(). The code to check for this is now placed in refill_reqs_available(). A test program from Dan and modified by me for verifying this bug is available at http://www.kvack.org/~bcrl/20140824-aio_bug.c . Reported-by:
Dan Aloni <dan@kernelim.com> Signed-off-by:
-
Anton Blanchard authored
commit cbd52281 upstream. Hidden away in the last 8 bytes of the buffer_list page is a solitary statistic. It needs to be byte swapped or else ethtool -S will produce numbers that terrify the user. Since we do this in multiple places, create a helper function with a comment explaining what is going on. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Geert Uytterhoeven authored
commit d717ea73 upstream. If pwm_get() finds a look-up entry with a perfect match (both dev_id and con_id match), the loop is aborted, and "p" still points to the correct struct pwm_lookup. If only an entry with a matching dev_id or con_id is found, the loop terminates after traversing the whole list, and "p" now points to arbitrary memory, not part of the pwm_lookup list. Then pwm_set_period() and pwm_set_polarity() will set random values for period resp. polarity. To fix this, save period and polarity when finding a new best match, just like is done for chip (for the provider) and index. This fixes the LCD backlight on r8a7740/armadillo-legacy, which was fed period 0 and polarity -1068821144 instead of 33333 resp. 1. Fixes: 3796ce1d ("pwm: add period and polarity to struct pwm_lookup") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
