After OS requests to down a link on a physical network port, the
traffic is no longer being processed but the physical link with
a link partner is still established.

Currently there is a feature (Link down on close) which allows
to physically bring the link down (after OS request).

With this patch new feature with similar capability is introduced:
TOTAL_PORT_SHUTDOWN
Allows to physically disable the link on the NIC's port.
If enabled, (after link down request from the OS)
no link, traffic or led activity is possible on that port.

If I40E_FLAG_TOTAL_PORT_SHUTDOWN is enabled, the
I40E_FLAG_LINK_DOWN_ON_CLOSE_ENABLED must be explicitly forced to
true and cannot be disabled at that time.
The functionalities are exclusive in terms of configuration, but
they also have similar behavior (allowing to disable physical link
of the port), with following differences:
- LINK_DOWN_ON_CLOSE_ENABLED is configurable at host OS run-time
  and is supported by whole family of 7xx Intel Ethernet Controllers
- TOTAL_PORT_SHUTDOWN may be enabled only before OS loads (in BIOS)
  only if motherboard's BIOS and NIC's FW has support of it
- when LINK_DOWN_ON_CLOSE_ENABLED is used, the link is being brought
  down by sending phy_type=0 to NIC's FW
- when TOTAL_PORT_SHUTDOWN is used, phy_type is not altered, instead
  the link is being brought down by clearing bit
  (I40E_AQ_PHY_ENABLE_LINK) in abilities field of
  i40e_aq_set_phy_config structure

Introduced changes:
- new private flag I40E_FLAG_TOTAL_PORT_SHUTDOWN for handling the
  feature
- probe of NVM if the feature was enabled at driver's port
  initialization
- special handling on link-down procedure to let FW physically
  shutdown the port if the feature was enabled
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Convert all the remaining 'fall through" code comments to the newer
'fallthrough;' keyword.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Rahul Lakkireddy says:

====================
cxgb4: add mirror action support for TC-MATCHALL

This series of patches add support to mirror all ingress traffic
for TC-MATCHALL ingress offload.

Patch 1 adds support to dynamically create a mirror Virtual Interface
(VI) that accepts all mirror ingress traffic when mirror action is
set in TC-MATCHALL offload.

Patch 2 adds support to allocate mirror Rxqs and setup RSS for the
mirror VI.

Patch 3 adds support to replicate all the main VI configuration to
mirror VI. This includes replicating MTU, promiscuous mode,
all-multicast mode, and enabled netdev Rx feature offloads.

v3:
- Replace mirror VI refcount_t with normal u32 variable in all patches.
- Add back calling cxgb4_port_mirror_start() in cxgb_open(), which
  was there in v1, but got missed in v2 during refactoring, in patch
  3.

v2:
- Add mutex to protect all mirror VI data, instead of just
  mirror Rxqs, in patch 1 and 2.
- Remove the un-needed mirror Rxq mutex in patch 2.
- Simplify the replication code by refactoring t4_set_rxmode()
  to handle mirror VI, instead of duplicating the t4_set_rxmode()
  calls in multiple places in patch 3.
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When mirror VI is enabled, replicate various VI config params
enabled on main VI to mirror VI. These include replicating MTU,
promiscuous mode, all-multicast mode, and enabled netdev Rx
feature offloads.

v3:
- Replace mirror VI refcount_t with normal u32 variable.
- Add back calling cxgb4_port_mirror_start() in cxgb_open(), which
  was there in v1, but got missed in v2 during refactoring.

v2:
- Simplify the replication code by refactoring t4_set_rxmode()
  to handle mirror VI, instead of duplicating the t4_set_rxmode()
  calls in multiple places.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When mirror VI is enabled, allocate the mirror Rxqs and setup the
mirror VI RSS table. The mirror Rxqs are allocated/freed when
the mirror VI is created/destroyed or when underlying port is
brought up/down, respectively.

v3:
- Replace mirror VI refcount_t with normal u32 variable.

v2:
- Use mutex to protect all mirror VI data, instead of just
  mirror Rxqs.
- Remove the un-needed mirror Rxq mutex.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add mirror Virtual Interface (VI) support to receive all ingress
mirror traffic from the underlying device. The mirror VI is
created dynamically, if the TC-MATCHALL rule has a corresponding
mirror action. Also request MSI-X vectors needed for the mirror VI
Rxqs. If no vectors are available, then disable mirror VI support.

v3:
- Replace mirror VI refcount_t with normal u32 variable.

v2:
- Add mutex to protect all mirror VI data, instead of just
  mirror Rxqs.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In certain configurations without power management support, the
following warnings happen:

../drivers/net/ethernet/amd/pcnet32.c:2928:12: warning:
'pcnet32_pm_resume' defined but not used [-Wunused-function]
 2928 | static int pcnet32_pm_resume(struct device *device_d)
      |            ^~~~~~~~~~~~~~~~~
../drivers/net/ethernet/amd/pcnet32.c:2916:12: warning:
'pcnet32_pm_suspend' defined but not used [-Wunused-function]
 2916 | static int pcnet32_pm_suspend(struct device *device_d)
      |            ^~~~~~~~~~~~~~~~~~

Mark these functions as __maybe_unused to make it clear to the compiler
that this is going to happen based on the configuration, which is the
standard for these types of functions.

Fixes: a86688fb ("pcnet32: Convert to generic power management")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In certain configurations without power management support, the
following warnings happen:

../drivers/net/ethernet/amd/amd8111e.c:1623:12: warning:
'amd8111e_resume' defined but not used [-Wunused-function]
 1623 | static int amd8111e_resume(struct device *dev_d)
      |            ^~~~~~~~~~~~~~~
../drivers/net/ethernet/amd/amd8111e.c:1584:12: warning:
'amd8111e_suspend' defined but not used [-Wunused-function]
 1584 | static int amd8111e_suspend(struct device *dev_d)
      |            ^~~~~~~~~~~~~~~~

Mark these functions as __maybe_unused to make it clear to the compiler
that this is going to happen based on the configuration, which is the
standard for these types of functions.

Fixes: 2caf751f ("amd8111e: Convert to generic power management")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bartosz Golaszewski says:

====================
net: improve devres helpers

So it seems like there's no support for relaxing certain networking devres
helpers to not require previously allocated structures to also be managed.
However the way mdio devres variants are implemented is still wrong and I
modified my series to address it while keeping the functions strict.

First two patches modify the ixgbe driver to get rid of the last user of
devm_mdiobus_free().

Patches 3, 4, 5 and 6 are mostly cosmetic.

Patch 7 fixes the way devm_mdiobus_register() is implemented.

Patches 8 & 9 provide a managed variant of of_mdiobus_register() and
last patch uses it in mtk-star-emac driver.

v1 -> v2:
- drop the patch relaxing devm_register_netdev()
- require struct mii_bus to be managed in devm_mdiobus_register() and
  devm_of_mdiobus_register() but don't store that information in the
  structure itself: use devres_find() instead
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Shrink the code by using the managed variant of of_mdiobus_register().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement a managed variant of of_mdiobus_register(). We need to make
mdio_devres into its own module because otherwise we'd hit circular
sumbol dependencies between phylib and of_mdio.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 'extern' keyword in headers doesn't have any benefit. Remove them
all from the of_mdio.h header.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We currently have two managed helpers for mdiobus - devm_mdiobus_alloc()
and devm_mdiobus_register(). The idea behind devres is that the release
callback releases whatever resource the devm function allocates. In the
mdiobus case however there's no devres associated with the device by
devm_mdiobus_register(). Instead the release callback for
devm_mdiobus_alloc(): _devm_mdiobus_free() unregisters the device if
it is marked as managed.

This all seems wrong. The managed structure shouldn't need to know or
care about whether it's managed or not - and this is the case now for
struct mii_bus. The devres wrapper should be opaque to the managed
resource.

This changeset makes devm_mdiobus_alloc() and devm_mdiobus_register()
conform to common devres standards: devm_mdiobus_alloc() allocates a
devres structure and registers a callback that will call mdiobus_free().
__devm_mdiobus_register() allocated another devres and registers a
callback that will unregister the bus.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function is not documented. Add a short kerneldoc description.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Functions should only be static inline if they're very short. This
devres helper is already over 10 lines and it will grow soon as we'll
be improving upon its approach. Pull it into mdio_devres.c.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have a devres variant of mdiobus_register() but it's not listed in
devres.rst. Add it under other mdio devm functions.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make it an explicit counterpart to devm_register_netdev() just like we
do with devm_free_netdev() for better clarity.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The idea behind devres is that the release callbacks are called if
probe fails. As we now check the return value of ixgbe_mii_bus_init(),
we can drop the call devm_mdiobus_free() in error path as the release
callback will be called automatically.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function may fail. Check its return value and propagate the error
code.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Find ports accessible by the VF, based on the index of the
mac address stored for the VF in the adapter. If no mac address
is stored for the VF, use the port mask provided by firmware.
Signed-off-by: Nirranjan Kirubaharan <nirranjan@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexander Lobakin says:

====================
net: qed/qede: license cleanup

QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.

Correct already existing but wrong SPDX tags to match the actual
license.
Remove the license boilerplates and replace them with the correct
SPDX tag.
Update copyright years in all source files.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Set the actual copyright holder and years in all qede source files.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Remove all the boilerplates in the existing code and replace it with the
correct SPDX tag.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Correct already existing but wrong SPDX tags to match the actual
license.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set the actual copyright holder and years in all qed source files.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Remove all the boilerplates in the existing code and replace it with the
correct SPDX tag.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

QLogic QED drivers source code is dual licensed under
GPL-2.0/BSD-3-Clause.
Correct already existing but wrong SPDX tags to match the actual
license.
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When skb is coalesced tcp_ack_tstamp() still needs to be called when not
fully acked in tcp_clean_rtx_queue(), otherwise SCM_TSTAMP_ACK
timestamps may never be fired. Since the original patch series had
dependent commits, this patch fixes the issue instead of reverting by
restoring calls to tcp_ack_tstamp() when skb is not fully acked.

Fixes: fdb7eb21 ("tcp: stamp SCM_TSTAMP_ACK later in tcp_clean_rtx_queue()")
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The error return path when create_singlethread_workqueue fails currently
does not kfree tls and leads to a memory leak. Fix this by kfree'ing
tls before returning -ENOMEM.

Addresses-Coverity: ("Resource leak")
Fixes: 1182f365 ("net/mlx5e: kTLS, Add kTLS RX HW offload support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This clean-up the code a bit, reduces the number of
used hooks and indirect call requested, and allow
better error reporting from __mptcp_subflow_connect()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Left shifting the u16 value promotes it to a int and then it
gets sign extended to a u64.  If len << 16 is greater than 0x7fffffff
then the upper bits get set to 1 because of the implicit sign extension.
Fix this by casting len to u64 before shifting it.

Addresses-Coverity: ("integer handling issues")
Fixes: ed9b7646 ("net/tls: Add asynchronous resync")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Edward Cree says:

====================
sfc: prerequisites for EF100 driver, part 2

Continuing on from [1], this series further prepares the sfc codebase
 for the introduction of the EF100 driver.

[1]: https://lore.kernel.org/netdev/20200629.173812.1532344417590172093.davem@davemloft.net/T/
====================
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

EF100 won't have an efx->type->tx_remove method, because there's
 nothing for it to do.  So make the call conditional.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saves a whole #include from nic.c.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ef100 will need to check this against NIC limits.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Define it in nic_common.h, even though the ef100 driver will have a
 different implementation backing it (actually a WARN_ON_ONCE as it
 should never get called by ef100.  But it needs to still exist because
 common TX path code references it).
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ef100 will need this if it gets GSO skbs it can't handle (e.g. too long
 header length).
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>