- 02 Aug, 2010 36 commits
-
-
Dave Airlie authored
* 'nouveau/for-airlied' of ../drm-nouveau-next: (77 commits) drm/nouveau: set TASK_(UN)INTERRUPTIBLE before schedule_timeout() drm/nv50: fix some not-error error messages drm/nouveau: introduce gpio engine drm/nv50: correct wait condition for instmem flush drm/nouveau: Fix TV-out detection on unposted cards lacking a usable DCB table. drm/nouveau: Get rid of the remaining VGA CRTC locking. drm/nouveau: Move display init to a new nouveau_engine. drm/nouveau: Put back the old 2-messages I2C slave test. drm/nouveau: Reset AGP before running the init scripts. drm/nv30: Init the PFB+0x3xx memory timing regs. drm/nouveau: disable hotplug detect around DP link training drm/nv50: add function to control GPIO IRQ reporting drm/nouveau: add nv_mask register accessor drm/nouveau: fix build without CONFIG_ACPI drm/nouveau: Reset CRTC owner to 0 before BIOS init. drm/nouveau: No need to lock/unlock the VGA CRTC regs all the time. drm/nouveau: Remove useless CRTC_OWNER logging. drm/nouveau: Add some generic I2C gadget detection code. drm/i2c/ch7006: Don't assume that the specified config points to static memory. drm/nv04-nv3x: Implement init-compute-mem. ... Conflicts: drivers/gpu/drm/nouveau/nouveau_bios.c
-
Dave Airlie authored
* 'drm-radeon-next' of ../drm-radeon-next: (333 commits) drm/radeon/kms: trivial code style fixes for audio drm/radeon: remove viewport transform from r6xx/r7xx blit emit drm/radeon: group r6xx/r7xx newly sequential blit state drm/radeon: reorder r6xx/r7xx blit state emit to make more regs sequential drm/radeon: r6xx/r7xx move vport clipping to a single packet drm/radeon: group r6xx/r7xx sequential blit state drm/radeon: remove duplicate state emit in r6xx/r7xx blit drm/radeon: add comments to r6xx/r7xx blit state drm/radeon/kms/r7xx: add workaround for hw issue with HDP flush drm/radeon/kms: remove rs4xx gart limit drm: radeon: fix sign bug drm/radeon/kms: check/restore sanity before doing anything else with GPU. drm/radeon: fall back to GTT if bo creation/validation in VRAM fails. drm/radeon/kms: add ioport register access drm/radeon/kms: enable HDMI audio on RS600/RS690/RS740 drm/radeon/kms: track audio engine state, do not use not setup timer drm/radeon/kms/r6xx+: add query for tile config (v2) drm/radeon/kms: fix CS alignment checking for tiling (v2) drm/radeon/kms: add tiling support to the cs checker for r6xx/r7xx drm/radeon/kms: Add crtc tiling setup support for evergreen ...
-
Francisco Jerez authored
sil164 transmitters are used for DVI outputs on Intel/nvidia and ATI setups. So far only nouveau can use this driver. Signed-off-by:
Francisco Jerez <currojerez@riseup.net> Tested-by:
Patrice Mandin <patmandin@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Nicolas Kaiser authored
Fixed brace and spacing coding style issues. Signed-off-by:
Nicolas Kaiser <nikai@nikai.net> Signed-off-by:
-
Nicolas Kaiser authored
Fixed brace and spacing coding style issues. Signed-off-by:
-
Nicolas Kaiser authored
Fixed brace, macro and spacing coding style issues. Signed-off-by:
-
Nicolas Kaiser authored
Fixed brace, macro and spacing coding style issues. Simplified -if (ret) return ret; -return 0; +return ret; Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Nicolas Kaiser authored
Fixed brace and spacing coding style issues. Signed-off-by:
-
Nicolas Kaiser authored
Fixed brace, macro and spacing coding style issues, and a C99 comment. Signed-off-by:
-
Chris Wilson authored
The device name is tightly coupled and created at the same time as the master->unique address, so we need to free it with the master. Currently we overwrite it each time we create a new master: unreferenced object 0xe32c54b0 (size 32): comm "Xorg", pid 1455, jiffies 4294721798 (age 3196.879s) hex dump (first 32 bytes): 69 39 31 35 40 70 63 69 3a 30 30 30 30 3a 30 30 i915@pci:0000:00 3a 30 32 2e 30 00 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 :02.0.kkkkkkkkk. backtrace: [<c04e5657>] create_object+0x124/0x1f1 [<c07cf0f0>] kmemleak_alloc+0x4c/0x90 [<c04db84c>] __kmalloc+0x155/0x175 [<f8316665>] drm_setversion+0x11d/0x1b1 [drm] [<f83148d4>] drm_ioctl+0x29a/0x356 [drm] [<c04f27c4>] vfs_ioctl+0x33/0x91 [<c04f31cf>] do_vfs_ioctl+0x46b/0x496 [<c04f3240>] sys_ioctl+0x46/0x66 [<c040325f>] sysenter_do_call+0x12/0x38 [<ffffffff>] 0xffffffff Signed-off-by:Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
/* A typical clean-up sequence for objects stored in an idr tree, will * use idr_for_each() to free all objects, if necessary, then * idr_remove_all() to remove all ids, and idr_destroy() to free * up the cached idr_layers. */ We were missing the vital idr_rmove_all() step and so were leaking the used layers for every dri client: unreferenced object 0xf32133c0 (size 148): comm "plymouthd", pid 131, jiffies 4294678490 (age 2308.030s) hex dump (first 32 bytes): 04 00 00 00 00 00 00 00 00 00 00 00 00 40 19 f3 .............@.. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<c04e5657>] create_object+0x124/0x1f1 [<c07cf100>] kmemleak_alloc+0x4c/0x90 [<c04db6a9>] kmem_cache_alloc+0xee/0x13c [<c05c3d25>] idr_pre_get+0x24/0x61 [<f8315c9c>] drm_gem_handle_create+0x27/0x7f [drm] [<f89925b2>] i915_gem_create_ioctl+0x4f/0x71 [i915] [<f83148ac>] drm_ioctl+0x272/0x356 [drm] [<c04f27c4>] vfs_ioctl+0x33/0x91 [<c04f31cf>] do_vfs_ioctl+0x46b/0x496 [<c04f3240>] sys_ioctl+0x46/0x66 [<c040325f>] sysenter_do_call+0x12/0x38 [<ffffffff>] 0xffffffff Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15803Signed-off-by: -
Kulikov Vasiliy authored
set_current_state() is called only once before the first iteration. After return from schedule_timeout() current state is TASK_RUNNING. If we are going to wait again, set_current_state() must be called. Signed-off-by:
Kulikov Vasiliy <segooon@gmail.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Chris Wilson authored
Trivial fix to set y1 = y2 = 0. Signed-off-by:
-
Alex Deucher authored
We aren't using it, so no need. Save additional dwords. Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
-
Alex Deucher authored
group state that is emitted sequentially into fewer packets. This saves a number of dwords. Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Saves lots of dwords in blit emit Signed-off-by:
-
Alex Deucher authored
group state that is emitted sequentially into fewer packets. This saves a number of dwords. Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Use of HDP_*_COHERENCY_FLUSH_CNTL can cause a hang in certain situations. Add workaround. Signed-off-by:
-
Alex Deucher authored
We used to limit the rs4xx gart aperture to 32 MB, but I suspect that was due to not meeting the alignment requirements of the aperture. This patch should only be applied after: "drm/radeon/kms: fix gtt MC base alignment on rs4xx/rs690/rs740 asics" has been applied. This patch should probably soak for a bit in d-r-t. Signed-off-by:
-
Dave Airlie authored
Need this to avoid conflicts with future radeon fixes
-
Dan Carpenter authored
The "error" variable is unsigned so it's never less than zero. I changed it to check if (freq < current_freq) directly. "best_error" is also unsigned so "best_error - 100" could be a large number instead of a negative. Since "error" is unsigned it is never less than a negative and so the cases where "best_error" is less than or equal to 100 are false. Signed-off-by:
Dan Carpenter <error27@gmail.com> Reviewed-by:
-
Dave Airlie authored
On systems using kexec, the new kernel is booted straight from the old kernel, without any warning to the graphics driver. So the GPU is basically left as-is in a running state, however the CPU side is completly reset. Without stating the saneness of anyone using kexec on live systems, we should at least try not to crash the GPU. This patch resets 3 registers to 0 that could cause bad things to happen to the running system. This allows kexec to work on a Power6/RN50 system. Signed-off-by: -
Michel Dänzer authored
This fixes a problem where on low VRAM cards we'd run out of space for validation. [airlied: Tested on my M7, Thinkpad T42, compiz works with no problems.] Signed-off-by:
Michel Dänzer <daenzer@vmware.com> Cc: stable@kernel.org Signed-off-by:
-
Alex Deucher authored
This is required for the NB_MISC regs on rs780/rs880 which means HDMI/DVI/DP ports using PCIEPHY won't work without it. It might also help with s/r (asic init) issues on other atombios cards. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=28774 and similar issues reported by Alberto Milone. [airlied: Squash io fix patch] Signed-off-by:
-
Rafał Miłecki authored
We will need method of selecting encoder that should receive HDMI block. For now we assign HDMI block to first enabled encoder. Hopefully there are not many RS6x0 chips with two digital encoders. [airlied: add RS740 checks as per Alex suggestion.] Signed-off-by:
-
Rafał Miłecki authored
This is needed to enable audio support on devices using polling. In case user decides to disable audio (module parameter) we still will try to use timer in r600_audio_enable_polling. This would lead to BUG in kernel/timer.c. Signed-off-by:
-
Alex Deucher authored
Userspace needs this information to access tiled buffers via the CPU. v2: rebased on evergreen accel changes Signed-off-by:
-
Alex Deucher authored
Covers depth, cb, and textures. Hopefully I got this right. v2: - fix bugs: https://bugs.freedesktop.org/show_bug.cgi?id=28327 https://bugs.freedesktop.org/show_bug.cgi?id=28381 - use ALIGNED(), IS_ALIGNED() macros Signed-off-by: -
Alex Deucher authored
Check for relocs for DB_DEPTH_INFO, CB_COLOR*_INFO, and texture resources. Signed-off-by:
-
Alex Deucher authored
Needed for scanning out of a tiled buffer. Signed-off-by:
-
Alex Deucher authored
Needed for scanning out of a tiled buffer. Signed-off-by:
-
Alex Deucher authored
rv6xx/rv7xx/evergreen families supported; older asics did not have an internal thermal sensor. Note, not all oems use the internal thermal sensor, so it's only exposed in cases where it is used. Note also, that most laptops use an oem specific ACPI solution for GPU thermal information rather than using the internal thermal sensor directly. v2: export millidegrees celsius, use hwmon device properly. v3: fix Kconfig Signed-off-by:
-
- 01 Aug, 2010 3 commits
-
-
Alberto Milone authored
By calling the ATIF method in the radeon driver we can make sure that hotkeys such as the video switch key emit ACPI events when pressed. agd5f: fix warning Signed-off-by:
Alberto Milone <alberto.milone@canonical.com> Signed-off-by:
-
Alex Deucher authored
Some tables have delays that can cause the timeout to hit even when not intended. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=27744 and related bugs. Signed-off-by:
-
Alex Deucher authored
- Make the logic in r100_pll_errata_after_index() match the other errata functions - Use rdev->family rather than rdev->flags & RADEON_FAMILY_MASK for kms - replace rn50 check using ids with ASIC_IS_RN50 convenience macro Signed-off-by:
-
- 26 Jul, 2010 1 commit
-
-
Ben Skeggs authored
Signed-off-by:
-
