- 17 May, 2011 29 commits
-
-
Chad Dupuis authored
Encapsulate the unlocking of the ROM lock in a function for better code readability. Signed-off-by:
Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by:
Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by:
James Bottomley <jbottomley@parallels.com> Signed-off-by:
James Bottomley <James.Bottomley@suse.de>
-
Chad Dupuis authored
Signed-off-by:
-
Madhuranath Iyengar authored
Signed-off-by:
-
Joe Carnuccio authored
The debug print prints the first byte of the buffer which is buf[8]. Signed-off-by:
Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by:
-
Saurav Kashyap authored
The driver keeps a copy of the fw_version within the ha structure. For ISP82xx, this local copy doesn't get updated, and as a result, the old firmware version ends up getting displayed. This patch fixes this issue. Signed-off-by:
Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by:
-
Arun Easi authored
Bumping ref count during fc_vport_terminate() was the cause. vport delete would wait for ref count to drop to zero and that would never happen. Cc: stable@kernel.org Signed-off-by:
Arun Easi <arun.easi@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
The firmware spec has the fcp_data_dseg_len defined as a 32-bit value, while the corresponding field in the driver structure has it defined as a 16-bit value. Cc: stable@kernel.org Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Saurav Kashyap authored
This patch ensures qla82xx_watchdog is not being run for the vport. It also makes sure that beacon ON is not done for the vport, as it will lead to the waking up of the dpc thread again and again. Signed-off-by:
-
Arun Easi authored
Timer is required to flush out entries that may be present in work queues. Cc: stable@kernel.org Signed-off-by:
-
Joe Perches authored
Not at all sure this is correct or appropriate to change, but this seems odd. Found via coccinelle script @@ type T; T* ptr; expression E1; @@ * memset(E1, 0, sizeof(ptr)); Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by:
-
Anton Blanchard authored
I noticed a stream of errors from the IPR driver while doing IOMMU fault injection. Rate limit the errors so we don't clog up the console and logfiles. Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
Scott Teel <scott.stacy.teel@hp.com> Signed-off-by:
-
Stephen M. Cameron authored
Just go straight to the soft-reset method instead. Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
-
Stephen M. Cameron authored
on driver load, if reset_devices is set, and the hard reset attempts fail, try to bring up the controller to the point that a command can be sent, and send it a soft reset command, then after the reset undo whatever driver initialization was done to get it to the point to take a command, and re-do it after the reset. This is to get kdump to work on all the "non-resettable" controllers (except 64xx controllers which can't be reset due to the potentially shared cache module.) Signed-off-by:
-
Stephen M. Cameron authored
The bit-2-doorbell reset method seemed to cause (survivable) NMIs on some systems and (unsurvivable) IOCK NMIs on some G7 servers. Firmware guys implemented a new doorbell method to alleviate these problems triggered by bit 5 of the doorbell register. We want to use it if it's available. Signed-off-by:
-
Stephen M. Cameron authored
hpsa_scsi_setup at one time contained enough code to justify its existence, but that time has passed. Signed-off-by:
-
Stephen M. Cameron authored
When waiting for the board to become "not ready" don't print a message saying "waiting for board to become ready" (possibly followed by a message saying "failed waiting for board to become not ready". Instead, it should be "waiting for board to reset" and "failed waiting for board to reset." Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
-
Stephen M. Cameron authored
This is to avoid the usual two or three messages about the command timing out. We're obviously not waiting long enough. Signed-off-by:
-
Stephen M. Cameron authored
Detect failure of controller reset by noticing if the 32 bytes of "driver version" we store on the hardware in the config table fail to get zeroed out. Previously we noticed if the controller did not transition to "simple mode", but this did not detect reset failure if the controller was already in simple mode prior to the reset attempt (e.g. due to module parameter hpsa_simple_mode=1). Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
-
Stephen M. Cameron authored
Signed-off-by:
-
Stephen M. Cameron authored
This is to ensure the board interrupts are really off when these functions return. Signed-off-by:
-
Stephen M. Cameron authored
Apparently we've been doin it rong for a decade, but only lately do we run into problems. Signed-off-by:
-
Borislav Petkov authored
Shut up drivers/message/fusion/mptsas.c: In function 'mptsas_event_process': drivers/message/fusion/mptsas.c:5015: warning: unused variable 'log_info' for configs with CONFIG_SCSI_MPT2SAS_LOGGING unset. Signed-off-by:
Borislav Petkov <borislav.petkov@amd.com> Acked-by:
"Desai, Kashyap" <Kashyap.Desai@lsi.com> Signed-off-by:
-
Kiran Patil authored
This is a comprehensive patch for FC-FC4 provider. tcm_fc is a FC-FC4 provider which glues target core (TCM) with Fiber channel library (libfc). tcm_fc uses existing FC4 provider hooks from Fiber channel library. This Fiber channel library is used by FCoE (transport - FC over Ethernet) protocol driver as well. Combination of modules such as Fiber channel library, tcm_fc, TCM target core, and FCoE protocol driver enables functional FCoE target. This patch includes initial commit for tcm_fc plus additional enhancement, bug fixes. This tcm_fc module essentially contains 3 entry points such as "prli", "prlo", "recv". When process login request (ELS_PRLI) request is received, Fiber channel library (libfc) module calls passive providers (FC-FC4, tcm_fc) (if any registered) "prli" function. Likewise when LOGO request is received, "prlo" function of passive provider is invoked by libfc. For all other request (e.g. any read/write, task management, LUN inquiry commands), "recv" function of passiver provider is invoked by libfc. Those passive providers "prli, prlo, recv" functions interact with TCM target core for requested operation. This module was primarily developed by "Joe Eykholt" and there were significant contributions from the people listed under signed-off. Signed-off-by:
Joe Eykholt <jeykholt@cisco.com> Signed-off-by:
Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Yi Zou <yi.zou@intel.com> Signed-off-by:
Kiran Patil <kiran.patil@intel.com> Acked-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
-
- 01 May, 2011 11 commits
-
-
Jayamohan Kallickal authored
Bump version. Signed-off-by:
Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Jayamohan Kallickal authored
This patch fixes a bug where proper queue id's were not passed to chip for cleanup. Signed-off-by:
-
Jayamohan Kallickal authored
This patch fixes a bug where the interrupts were not rearmed if the Interrupt Mask was enabled. This patch checks for Interrupt mask enabled and still rearms interrupt generation even if the Interrupt mask was enabled Signed-off-by:
-
Tomas Henzl authored
The code currently computes an offset into a dma_alloc_coherent() area on the assumption that the alignment is imprecise. In fact, the API guarantees PAGE_SIZE alignment, so the offset calculation is always zero: remove it. [jejb: make description actually descriptive] Signed-off-by:
Tomas henzl <thenzl@redhat.com> Acked-by: Nick Cheng<nick.cheng@areca.com.tw> Signed-off-by:
-
Tomas Henzl authored
I removed outer loops in ...wait_msgint_ready the sleeptime and retrycount are in fact never changed so I changed them into defines. In arcmsr_flush_hba_cache is a loop removed, which printed the same printk 100 times, one line in log is enough I think. The arcmsr_sleep_for_bus_reset has lost a functionality with the latest patches, The only thing the function does is a long sleep, so it's replaced with a ssleep. [jejb: checkpatch fixes] Signed-off-by:
Nick Cheng <nick.cheng@areca.com.tw> Signed-off-by:
-
Vasu Dev authored
Use fc_exch_mgr_list_clone to setup em for npiv port. Also remove redundant vport and lport initializations. Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Acked-by:
Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by:
-
Jeff Mahoney authored
On systems with very large numbers (> 1600 or so) of SCSI devices, cat /proc/scsi/scsi ends up failing with -ENOMEM. This is due to the show routine simply iterating over all of the devices with bus_for_each_dev(), and trying to dump all of them into the buffer at the same time. On my test system (using scsi_debug with 4064 devices), the output ends up being ~ 632k, far more than kmalloc will typically allow. This patch defines its own seq_file opreations to iterate over the scsi devices.The result is that each show() operation only dumps ~ 180 bytes into the buffer at a time so we don't run out of memory. If the "Attached devices" header isn't required, we can dump the sfile->private bit completely. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Kleber Sacilotto de Souza authored
Bump the driver version. Signed-off-by:
Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by:
-
Brian King authored
This patch fixes an issue seen where an event occurs which causes the ibmvscsi driver to reset its CRQ. Upon re-registering its CRQ, it receives H_CLOSED, indicating the Virtual I/O Server is not yet ready to receive commands. This resulted in the ibmvscsi driver essentially offlining the adapter and not recovering. The fix is to re-enable our interrupt so that when the Virtual I/O server is ready and sends a CRQ init, we will be able to receive it and resume initialization of the VSCSI adapter. Signed-off-by:
-
Kleber Sacilotto de Souza authored
Currently the size of the dump generated by the driver is limited in 4MB, which is insufficient to gather much useful data from the new 64 bit adapters. This patch makes the needed changes to increase the dump limit for the 64 bit adapters to 32MB, or even to a bigger value in the future, but keeping the current limitations for the legacy 32 bit adapters. Signed-off-by:
-
Xiangliang Yu authored
1. Add support for Task collector mode. 2. Fixed relative collector mode bug: - I/O failed when disks is on two ports - system hang when hotplug disk - system hang when unplug disk during run IO 3. Unlock ap->lock within .lldd_execute_task for direct mode to improve performance Signed-off-by:
Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by:
-
