Allow to specify '^' at the end of stat name to designate that it should
be sorted in ascending order. Similarly, allow any of 'v', 'V', '.',
'!', or '_' suffix "symbols" to designate descending order. It's such
a zoo for descending order because there is no single intuitive symbol
that could be used (using 'v' looks pretty weird in practice), so few
symbols that are "downwards leaning or pointing" were chosen. Either
way, it shouldn't cause any troubles in practice.

This new feature allows to customize sortering order to match user's
needs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221103055304.2904589-6-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Always fall back to unique file/prog comparison if user's custom order
specs are ambiguous. This ensures stable output no matter what.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221103055304.2904589-5-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Slightly change rules of specifying file/prog glob filters. In practice
it's quite often inconvenient to do `*/<prog-glob>` if that program glob
is unique enough and won't accidentally match any file names.

This patch changes the rules so that `-f <glob>` will apply specified
glob to both file and program names. User still has all the control by
doing '*/<prog-only-glob>' or '<file-only-glob/*'. We also now allow
'/<prog-glob>' and '<file-glob/' (all matching wildcard is assumed if
missing).

Also, internally unify file-only and file+prog checks
(should_process_file and should_process_prog are now
should_process_file_prog that can handle prog name as optional). This
makes maintaining and extending this code easier.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221103055304.2904589-4-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

In comparison mode the "Total " part is pretty useless, but takes
a considerable amount of horizontal space. Drop the "Total " parts.

Also make sure that table headers for numerical columns are aligned in
the same fashion as integer values in those columns. This looks better
and is now more obvious with shorter "Insns" and "States" column
headers.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221103055304.2904589-3-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Replay mode allow to parse previously stored CSV file with verification
results and present it in desired output (presumable human-readable
table, but CSV to CSV convertion is supported as well). While doing
that, it's possible to use veristat's sorting rules, specify subset of
columns, and filter by file and program name.

In subsequent patches veristat's filtering capabilities will just grow
making replay mode even more useful in practice for post-processing
results.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221103055304.2904589-2-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

To prepare the BPF verifier to handle special fields in both map values
and program allocated types coming from program BTF, we need to refactor
the kptr_off_tab handling code into something more generic and reusable
across both cases to avoid code duplication.

Later patches also require passing this data to helpers at runtime, so
that they can work on user defined types, initialize them, destruct
them, etc.

The main observation is that both map values and such allocated types
point to a type in program BTF, hence they can be handled similarly. We
can prepare a field metadata table for both cases and store them in
struct bpf_map or struct btf depending on the use case.

Hence, refactor the code into generic btf_record and btf_field member
structs. The btf_record represents the fields of a specific btf_type in
user BTF. The cnt indicates the number of special fields we successfully
recognized, and field_mask is a bitmask of fields that were found, to
enable quick determination of availability of a certain field.

Subsequently, refactor the rest of the code to work with these generic
types, remove assumptions about kptr and kptr_off_tab, rename variables
to more meaningful names, etc.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221103191013.1236066-7-memxor@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

It is not scalable to maintain a list of types that can have non-zero
ref_obj_id. It is never set for scalars anyway, so just remove the
conditional on register types and print it whenever it is non-zero.
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221103191013.1236066-6-memxor@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

For the case where allow_ptr_leaks is false, code is checking whether
slot type is STACK_INVALID and STACK_SPILL and rejecting other cases.
This is a consequence of incorrectly checking for register type instead
of the slot type (NOT_INIT and SCALAR_VALUE respectively). Fix the
check.

Fixes: 01f810ac ("bpf: Allow variable-offset stack access")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221103191013.1236066-5-memxor@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

When support was added for spilled PTR_TO_BTF_ID to be accessed by
helper memory access, the stack slot was not overwritten to STACK_MISC
(and that too is only safe when env->allow_ptr_leaks is true).

This means that helpers who take ARG_PTR_TO_MEM and write to it may
essentially overwrite the value while the verifier continues to track
the slot for spilled register.

This can cause issues when PTR_TO_BTF_ID is spilled to stack, and then
overwritten by helper write access, which can then be passed to BPF
helpers or kfuncs.

Handle this by falling back to the case introduced in a later commit,
which will also handle PTR_TO_BTF_ID along with other pointer types,
i.e. cd17d38f ("bpf: Permits pointers on stack for helper calls").

Finally, include a comment on why REG_LIVE_WRITTEN is not being set when
clobber is set to true. In short, the reason is that while when clobber
is unset, we know that we won't be writing, when it is true, we *may*
write to any of the stack slots in that range. It may be a partial or
complete write, to just one or many stack slots.

We cannot be sure, hence to be conservative, we leave things as is and
never set REG_LIVE_WRITTEN for any stack slot. However, clobber still
needs to reset them to STACK_MISC assuming writes happened. However read
marks still need to be propagated upwards from liveness point of view,
as parent stack slot's contents may still continue to matter to child
states.

Cc: Yonghong Song <yhs@meta.com>
Fixes: 1d68f22b ("bpf: Handle spilled PTR_TO_BTF_ID properly when checking stack_boundary")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20221103191013.1236066-4-memxor@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

This is useful in particular to mark the pointer as volatile, so that
compiler treats each load and store to the field as a volatile access.
The alternative is having to define and use READ_ONCE and WRITE_ONCE in
the BPF program.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221103191013.1236066-3-memxor@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The kernel recognizes some special BPF types in map values or local
kptrs. Document that only bpf_spin_lock and bpf_timer will preserve
backwards compatibility, and kptr will preserve backwards compatibility
for the operations on the pointer, not the types supported for such
kptrs.

For local kptrs, document that there are no stability guarantees at all.

Finally, document that 'bpf_' namespace is reserved for adding future
special fields, hence BPF programs must not declare types with such
names in their programs and still expect backwards compatibility.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221103191013.1236066-2-memxor@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

syzkaller managed to trigger another case where skb->len == 0
when we enter __dev_queue_xmit:

WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 skb_assert_len include/linux/skbuff.h:2576 [inline]
WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 __dev_queue_xmit+0x2069/0x35e0 net/core/dev.c:4295

Call Trace:
 dev_queue_xmit+0x17/0x20 net/core/dev.c:4406
 __bpf_tx_skb net/core/filter.c:2115 [inline]
 __bpf_redirect_no_mac net/core/filter.c:2140 [inline]
 __bpf_redirect+0x5fb/0xda0 net/core/filter.c:2163
 ____bpf_clone_redirect net/core/filter.c:2447 [inline]
 bpf_clone_redirect+0x247/0x390 net/core/filter.c:2419
 bpf_prog_48159a89cb4a9a16+0x59/0x5e
 bpf_dispatcher_nop_func include/linux/bpf.h:897 [inline]
 __bpf_prog_run include/linux/filter.h:596 [inline]
 bpf_prog_run include/linux/filter.h:603 [inline]
 bpf_test_run+0x46c/0x890 net/bpf/test_run.c:402
 bpf_prog_test_run_skb+0xbdc/0x14c0 net/bpf/test_run.c:1170
 bpf_prog_test_run+0x345/0x3c0 kernel/bpf/syscall.c:3648
 __sys_bpf+0x43a/0x6c0 kernel/bpf/syscall.c:5005
 __do_sys_bpf kernel/bpf/syscall.c:5091 [inline]
 __se_sys_bpf kernel/bpf/syscall.c:5089 [inline]
 __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5089
 do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48
 entry_SYSCALL_64_after_hwframe+0x61/0xc6

The reproducer doesn't really reproduce outside of syzkaller
environment, so I'm taking a guess here. It looks like we
do generate correct ETH_HLEN-sized packet, but we redirect
the packet to the tunneling device. Before we do so, we
__skb_pull l2 header and arrive again at skb->len == 0.
Doesn't seem like we can do anything better than having
an explicit check after __skb_pull?

Cc: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+f635e86ec3fa0a37e019@syzkaller.appspotmail.com
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20221027225537.353077-1-sdf@google.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from bluetooth and netfilter.

  Current release - regressions:

   - net: several zerocopy flags fixes

   - netfilter: fix possible memory leak in nf_nat_init()

   - openvswitch: add missing .resv_start_op

  Previous releases - regressions:

   - neigh: fix null-ptr-deref in neigh_table_clear()

   - sched: fix use after free in red_enqueue()

   - dsa: fall back to default tagger if we can't load the one from DT

   - bluetooth: fix use-after-free in l2cap_conn_del()

  Previous releases - always broken:

   - netfilter: netlink notifier might race to release objects

   - nfc: fix potential memory leak of skb

   - bluetooth: fix use-after-free caused by l2cap_reassemble_sdu

   - bluetooth: use skb_put to set length

   - eth: tun: fix bugs for oversize packet when napi frags enabled

   - eth: lan966x: fixes for when MTU is changed

   - eth: dwmac-loongson: fix invalid mdio_node"

* tag 'net-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
  vsock: fix possible infinite sleep in vsock_connectible_wait_data()
  vsock: remove the unused 'wait' in vsock_connectible_recvmsg()
  ipv6: fix WARNING in ip6_route_net_exit_late()
  bridge: Fix flushing of dynamic FDB entries
  net, neigh: Fix null-ptr-deref in neigh_table_clear()
  net/smc: Fix possible leaked pernet namespace in smc_init()
  stmmac: dwmac-loongson: fix invalid mdio_node
  ibmvnic: Free rwi on reset success
  net: mdio: fix undefined behavior in bit shift for __mdiobus_register
  Bluetooth: L2CAP: Fix attempting to access uninitialized memory
  Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
  Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
  Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
  Bluetooth: L2CAP: Fix memory leak in vhci_write
  Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()
  Bluetooth: virtio_bt: Use skb_put to set length
  Bluetooth: hci_conn: Fix CIS connection dst_type handling
  Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu
  netfilter: ipset: enforce documented limit to prevent allocating huge memory
  isdn: mISDN: netjet: fix wrong check of device registration
  ...

Pull powerpc fixes from Michael Ellerman:

 - Fix an endian thinko in the asm-generic compat_arg_u64() which led to
   syscall arguments being swapped for some compat syscalls.

 - Fix syscall wrapper handling of syscalls with 64-bit arguments on
   32-bit kernels, which led to syscall arguments being misplaced.

 - A build fix for amdgpu on Book3E with AltiVec disabled.

Thanks to Andreas Schwab, Christian Zigotzky, and Arnd Bergmann.

* tag 'powerpc-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/32: Select ARCH_SPLIT_ARG64
  powerpc/32: fix syscall wrappers with 64-bit arguments
  asm-generic: compat: fix compat_arg_u64() and compat_arg_u64_dual()
  powerpc/64e: Fix amdgpu build on Book3E w/o AltiVec

Daniel Machon says:

====================
Add new PCP and APPTRUST attributes to dcbnl

This patch series adds new extension attributes to dcbnl, to support PCP
prioritization (and thereby hw offloadable pcp-based queue
classification) and per-selector trust and trust order. Additionally,
the microchip sparx5 driver has been dcb-enabled to make use of the new
attributes to offload PCP, DSCP and Default prio to the switch, and
implement trust order of selectors.

For pre-RFC discussion see:
https://lore.kernel.org/netdev/Yv9VO1DYAxNduw6A@DEN-LT-70577/

For RFC series see:
https://lore.kernel.org/netdev/20220915095757.2861822-1-daniel.machon@microchip.com/

In summary: there currently exist no convenient way to offload per-port
PCP-based queue classification to hardware. The DCB subsystem offers
different ways to prioritize through its APP table, but lacks an option
for PCP. Similarly, there is no way to indicate the notion of trust for
APP table selectors. This patch series addresses both topics.

PCP based queue classification:
  - 8021Q standardizes the Priority Code Point table (see 6.9.3 of IEEE
    Std 802.1Q-2018).  This patch series makes it possible, to offload
    the PCP classification to said table.  The new PCP selector is not a
    standard part of the APP managed object, therefore it is
    encapsulated in a new non-std extension attribute.

Selector trust:
  - ASIC's often has the notion of trust DSCP and trust PCP. The new
    attribute makes it possible to specify a trust order of app
    selectors, which drivers can then react on.

DCB-enable sparx5 driver:
 - Now supports offloading of DSCP, PCP and default priority. Only one
   mapping of protocol:priority is allowed. Consecutive mappings of the
   same protocol to some new priority, will overwrite the previous. This
   is to keep a consistent view of the app table and the hardware.
 - Now supports dscp and pcp trust, by use of the introduced
   dcbnl_set/getapptrust ops. Sparx5 supports trust orders: [], [dscp],
   [pcp] and [dscp, pcp]. For now, only DSCP and PCP selectors are
   supported by the driver, everything else is bounced.

Patch #1 introduces a new PCP selector to the APP object, which makes it
possible to encode PCP and DEI in the app triplet and offload it to the
PCP table of the ASIC.

Patch #2 Introduces the new extension attributes
DCB_ATTR_DCB_APP_TRUST_TABLE and DCB_ATTR_DCB_APP_TRUST. Trusted
selectors are passed in the nested DCB_ATTR_DCB_APP_TRUST_TABLE
attribute, and assembled into an array of selectors:

  u8 selectors[256];

where lower indexes has higher precedence.  In the array, selectors are
stored consecutively, starting from index zero. With a maximum number of
256 unique selectors, the list has the same maximum size.

Patch #3 Sets up the dcbnl ops hook, and adds support for offloading pcp
app entries, to the PCP table of the switch.

Patch #4 Makes use of the dcbnl_set/getapptrust ops, to set a per-port
trust order.

Patch #5 Adds support for offloading dscp app entries to the DSCP table
of the switch.

Patch #6 Adds support for offloading default prio app entries to the
switch.

====================

Link: https://lore.kernel.org/r/20221101094834.2726202-1-daniel.machon@microchip.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add support for offloading default prio {ETHERTYPE, 0, prio}.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add support for offloading dscp app entries. Dscp values are global for
all ports on the sparx5 switch. Therefore, we replicate each dscp app
entry per-port.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Make use of set/getapptrust() to implement per-selector trust and trust
order.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add new registers and functions to support offload of pcp app entries.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add new apptrust extension attributes to the 8021Qaz APP managed object.

Two new attributes, DCB_ATTR_DCB_APP_TRUST_TABLE and
DCB_ATTR_DCB_APP_TRUST, has been added. Trusted selectors are passed in
the nested attribute DCB_ATTR_DCB_APP_TRUST, in order of precedence.

The new attributes are meant to allow drivers, whose hw supports the
notion of trust, to be able to set whether a particular app selector is
trusted - and in which order.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add new PCP selector for the 8021Qaz APP managed object.

As the PCP selector is not part of the 8021Qaz standard, a new non-std
extension attribute DCB_ATTR_DCB_APP has been introduced. Also two
helper functions to translate between selector and app attribute type
has been added. The new selector has been given a value of 255, to
minimize the risk of future overlap of std- and non-std attributes.

The new DCB_ATTR_DCB_APP is sent alongside the ieee std attribute in the
app table. This means that the dcb_app struct can now both contain std-
and non-std app attributes. Currently there is no overlap between the
selector values of the two attributes.

The purpose of adding the PCP selector, is to be able to offload
PCP-based queue classification to the 8021Q Priority Code Point table,
see 6.9.3 of IEEE Std 802.1Q-2018.

PCP and DEI is encoded in the protocol field as 8*dei+pcp, so that a
mapping of PCP 2 and DEI 1 to priority 3 is encoded as {255, 10, 3}.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

In large VMs with multiple NUMA nodes, network performance is usually
best if network interrupts are all assigned to the same virtual NUMA
node. This patch assigns online CPU according to a numa aware policy,
local cpus are returned first, followed by non-local ones, then it wraps
around.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1667282761-11547-1-git-send-email-ssengar@linux.microsoft.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Dexuan Cui says:

====================
vsock: remove an unused variable and fix infinite sleep

Patch 1 removes the unused 'wait' variable.
Patch 2 fixes an infinite sleep issue reported by a hv_sock user.
====================

Link: https://lore.kernel.org/r/20221101021706.26152-1-decui@microsoft.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Currently vsock_connectible_has_data() may miss a wakeup operation
between vsock_connectible_has_data() == 0 and the prepare_to_wait().

Fix the race by adding the process to the wait queue before checking
vsock_connectible_has_data().

Fixes: b3f7fd54 ("af_vsock: separate wait data loop")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reported-by: Frédéric Dalleau <frederic.dalleau@docker.com>
Tested-by: Frédéric Dalleau <frederic.dalleau@docker.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Remove the unused variable introduced by 19c1b90e.

Fixes: 19c1b90e ("af_vsock: separate receive data loop")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This patch adds the initial XDP support to Freescale driver. It supports
XDP_PASS, XDP_DROP and XDP_REDIRECT actions. Upcoming patches will add
support for XDP_TX and Zero Copy features.

As the patch is rather large, the part of codes to collect the
statistics is separated and will prepare a dedicated patch for that
part.

I just tested with the application of xdpsock.
  -- Native here means running command of "xdpsock -i eth0"
  -- SKB-Mode means running command of "xdpsock -S -i eth0"

The following are the testing result relating to XDP mode:

root@imx8qxpc0mek:~/bpf# ./xdpsock -i eth0
 sock0@eth0:0 rxdrop xdp-drv
                   pps            pkts           1.00
rx                 371347         2717794
tx                 0              0

root@imx8qxpc0mek:~/bpf# ./xdpsock -S -i eth0
 sock0@eth0:0 rxdrop xdp-skb
                   pps            pkts           1.00
rx                 202229         404528
tx                 0              0

root@imx8qxpc0mek:~/bpf# ./xdp2 eth0
proto 0:     496708 pkt/s
proto 0:     505469 pkt/s
proto 0:     505283 pkt/s
proto 0:     505443 pkt/s
proto 0:     505465 pkt/s

root@imx8qxpc0mek:~/bpf# ./xdp2 -S eth0
proto 0:          0 pkt/s
proto 17:     118778 pkt/s
proto 17:     118989 pkt/s
proto 0:          1 pkt/s
proto 17:     118987 pkt/s
proto 0:          0 pkt/s
proto 17:     118943 pkt/s
proto 17:     118976 pkt/s
proto 0:          1 pkt/s
proto 17:     119006 pkt/s
proto 0:          0 pkt/s
proto 17:     119071 pkt/s
proto 17:     119092 pkt/s
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20221031185350.2045675-1-shenwei.wang@nxp.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The 10Mbps link speed was set in 2004 when the ethtool interface was
initially added to the tun driver.  It might have been a good
assumption 18 years ago, but CPUs and network stack came a long way
since then.

Other virtual ports typically report much higher speeds.  For example,
veth reports 10Gbps since its introduction in 2007.

Some userspace applications rely on the current link speed in
certain situations.  For example, Open vSwitch is using link speed
as an upper bound for QoS configuration if user didn't specify the
maximum rate.  Advertised 10Mbps doesn't match reality in a modern
world, so users have to always manually override the value with
something more sensible to avoid configuration issues, e.g. limiting
the traffic too much.  This also creates additional confusion among
users.

Bump the advertised speed to at least match the veth.

Alternative might be to explicitly report UNKNOWN and let the user
decide on a right value for them.  And it is indeed "the right way"
of fixing the problem.  However, that may cause issues with bonding
or with some userspace applications that may rely on speed value to
be reported (even though they should not).  Just changing the speed
value should be a safer option.

Users can still override the speed with ethtool, if necessary.

RFC discussion is linked below.

Link: https://lore.kernel.org/lkml/20221021114921.3705550-1-i.maximets@ovn.org/
Link: https://mail.openvswitch.org/pipermail/ovs-discuss/2022-July/051958.htmlSigned-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20221031173953.614577-1-i.maximets@ovn.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

During the initialization of ip6_route_net_init_late(), if file
ipv6_route or rt6_stats fails to be created, the initialization is
successful by default. Therefore, the ipv6_route or rt6_stats file
doesn't be found during the remove in ip6_route_net_exit_late(). It
will cause WRNING.

The following is the stack information:
name 'rt6_stats'
WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460
Modules linked in:
Workqueue: netns cleanup_net
RIP: 0010:remove_proc_entry+0x389/0x460
PKRU: 55555554
Call Trace:
<TASK>
ops_exit_list+0xb0/0x170
cleanup_net+0x4ea/0xb00
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>

Fixes: cdb18761 ("[NETNS][IPV6] route6 - create route6 proc files for the namespace")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221102020610.351330-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The following commands should result in all the dynamic FDB entries
being flushed, but instead all the non-local (non-permanent) entries are
flushed:

 # bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static
 # bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic
 # ip link set dev br0 type bridge fdb_flush
 # bridge fdb show brport dummy1
 00:00:00:00:00:01 master br0 permanent
 33:33:00:00:00:01 self permanent
 01:00:5e:00:00:01 self permanent

This is because br_fdb_flush() works with FDB flags and not the
corresponding enumerator values. Fix by passing the FDB flag instead.

After the fix:

 # bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static
 # bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic
 # ip link set dev br0 type bridge fdb_flush
 # bridge fdb show brport dummy1
 00:aa:bb:cc:dd:ee master br0 static
 00:00:00:00:00:01 master br0 permanent
 33:33:00:00:00:01 self permanent
 01:00:5e:00:00:01 self permanent

Fixes: 1f78ee14 ("net: bridge: fdb: add support for fine-grained flushing")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20221101185753.2120691-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says:

====================
rocker: Two small changes

Patch #1 avoids allocating and scheduling a work item when it is not
doing any work.

Patch #2 aligns rocker with other switchdev drivers to explicitly mark
FDB entries as offloaded. Needed for upcoming MAB offload [1].

[1] https://lore.kernel.org/netdev/20221025100024.1287157-1-idosch@nvidia.com/
====================

Link: https://lore.kernel.org/r/20221101123936.1900453-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, FDB entries that are notified to the bridge driver via
'SWITCHDEV_FDB_ADD_TO_BRIDGE' are always marked as offloaded by the
bridge. With MAB enabled, this will no longer be universally true.
Device drivers will report locked FDB entries to the bridge to let it
know that the corresponding hosts required authorization, but it does
not mean that these entries are necessarily programmed in the underlying
hardware.

We would like to solve it by having the bridge driver determine the
offload indication based of the 'offloaded' bit in the FDB notification
[1].

Prepare for that change by having rocker explicitly mark learned FDB
entries as offloaded. This is consistent with all the other switchdev
drivers.

[1] https://lore.kernel.org/netdev/20221025100024.1287157-4-idosch@nvidia.com/Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The work item function ofdpa_port_fdb_learn_work() does not do anything
when 'OFDPA_OP_FLAG_LEARNED' is not set in the work item's flags.

Therefore, do not allocate and do not schedule the work item when the
flag is not set.
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When IPv6 module gets initialized but hits an error in the middle,
kenel panic with:

KASAN: null-ptr-deref in range [0x0000000000000598-0x000000000000059f]
CPU: 1 PID: 361 Comm: insmod
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:__neigh_ifdown.isra.0+0x24b/0x370
RSP: 0018:ffff888012677908 EFLAGS: 00000202
...
Call Trace:
 <TASK>
 neigh_table_clear+0x94/0x2d0
 ndisc_cleanup+0x27/0x40 [ipv6]
 inet6_init+0x21c/0x2cb [ipv6]
 do_one_initcall+0xd3/0x4d0
 do_init_module+0x1ae/0x670
...
Kernel panic - not syncing: Fatal exception

When ipv6 initialization fails, it will try to cleanup and calls:

neigh_table_clear()
  neigh_ifdown(tbl, NULL)
    pneigh_queue_purge(&tbl->proxy_queue, dev_net(dev == NULL))
    # dev_net(NULL) triggers null-ptr-deref.

Fix it by passing NULL to pneigh_queue_purge() in neigh_ifdown() if dev
is NULL, to make kernel not panic immediately.

Fixes: 66ba215c ("neigh: fix possible DoS due to net iface start/stop loop")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Link: https://lore.kernel.org/r/20221101121552.21890-1-chenzhongjin@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In smc_init(), register_pernet_subsys(&smc_net_stat_ops) is called
without any error handling.
If it fails, registering of &smc_net_ops won't be reverted.
And if smc_nl_init() fails, &smc_net_stat_ops itself won't be reverted.

This leaves wild ops in subsystem linkedlist and when another module
tries to call register_pernet_operations() it triggers page fault:

BUG: unable to handle page fault for address: fffffbfff81b964c
RIP: 0010:register_pernet_operations+0x1b9/0x5f0
Call Trace:
  <TASK>
  register_pernet_subsys+0x29/0x40
  ebtables_init+0x58/0x1000 [ebtables]
  ...

Fixes: 194730a9 ("net/smc: Make SMC statistics network namespace aware")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/20221101093722.127223-1-chenzhongjin@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ef100_enqueue_skb() generates a valid warning with gcc-13:
  drivers/net/ethernet/sfc/ef100_tx.c:370:5: error: conflicting types for 'ef100_enqueue_skb' due to enum/integer mismatch; have 'int(struct efx_tx_queue *, struct sk_buff *)'
  drivers/net/ethernet/sfc/ef100_tx.h:25:13: note: previous declaration of 'ef100_enqueue_skb' with type 'netdev_tx_t(struct efx_tx_queue *, struct sk_buff *)'

I.e. the type of the ef100_enqueue_skb()'s return value in the declaration is
int, while the definition spells enum netdev_tx_t. Synchronize them to the
latter.

Cc: Martin Liska <mliska@suse.cz>
Cc: Edward Cree <ecree.xilinx@gmail.com>
Cc: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20221031114440.10461-1-jirislaby@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Both bond_alb_xmit() and bond_tlb_xmit() produce a valid warning with
gcc-13:
  drivers/net/bonding/bond_alb.c:1409:13: error: conflicting types for 'bond_tlb_xmit' due to enum/integer mismatch; have 'netdev_tx_t(struct sk_buff *, struct net_device *)' ...
  include/net/bond_alb.h:160:5: note: previous declaration of 'bond_tlb_xmit' with type 'int(struct sk_buff *, struct net_device *)'

  drivers/net/bonding/bond_alb.c:1523:13: error: conflicting types for 'bond_alb_xmit' due to enum/integer mismatch; have 'netdev_tx_t(struct sk_buff *, struct net_device *)' ...
  include/net/bond_alb.h:159:5: note: previous declaration of 'bond_alb_xmit' with type 'int(struct sk_buff *, struct net_device *)'

I.e. the return type of the declaration is int, while the definitions
spell netdev_tx_t. Synchronize both of them to the latter.

Cc: Martin Liska <mliska@suse.cz>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20221031114409.10417-1-jirislaby@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

gcc 13 correctly reports overflow in qed_grc_dump_addr_range():
In file included from drivers/net/ethernet/qlogic/qed/qed.h:23,
                 from drivers/net/ethernet/qlogic/qed/qed_debug.c:10:
drivers/net/ethernet/qlogic/qed/qed_debug.c: In function 'qed_grc_dump_addr_range':
include/linux/qed/qed_if.h:1217:9: error: overflow in conversion from 'int' to 'u8' {aka 'unsigned char'} changes value from '(int)vf_id << 8 | 128' to '128' [-Werror=overflow]

We do:
  u8 fid;
  ...
  fid = vf_id << 8 | 128;

Since fid is 16bit (and the stored value above too), fid should be u16,
not u8. Fix that.

Cc: Martin Liska <mliska@suse.cz>
Cc: Ariel Elior <aelior@marvell.com>
Cc: Manish Chopra <manishc@marvell.com>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20221031114354.10398-1-jirislaby@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This allows BQL to operate avoiding buffer bloat and reducing latency.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20221031104856.32388-1-zajec5@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In current code "plat->mdio_node" is always NULL, the mdio
support is lost as there is no "mdio_bus_data". The original
driver could work as the "mdio" variable is never set to
false, which is described in commit <b0e03950> ("stmmac:
dwmac-loongson: fix uninitialized variable ......"). And
after this commit merged, the "mdio" variable is always
false, causing the mdio supoort logic lost.

Fixes: 30bba69d ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221101060218.16453-1-liupeibao@loongson.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>