- 31 Jul, 2011 4 commits
-
-
Erik Andrén authored
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Erik Andrén authored
No functional changes on this patch. Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Erik Andrén authored
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Erik Andrén authored
Signed-off-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 30 Jul, 2011 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds authored
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (430 commits) [media] ir-mce_kbd-decoder: include module.h for its facilities [media] ov5642: include module.h for its facilities [media] em28xx: Fix DVB-C maxsize for em2884 [media] tda18271c2dd: Fix saw filter configuration for DVB-C @6MHz [media] v4l: mt9v032: Fix Bayer pattern [media] V4L: mt9m111: rewrite set_pixfmt [media] V4L: mt9m111: fix missing return value check mt9m111_reg_clear [media] V4L: initial driver for ov5642 CMOS sensor [media] V4L: sh_mobile_ceu_camera: fix Oops when USERPTR mapping fails [media] V4L: soc-camera: remove soc-camera bus and devices on it [media] V4L: soc-camera: un-export the soc-camera bus [media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier [media] V4L: add media bus configuration subdev operations [media] V4L: soc-camera: group struct field initialisations together [media] V4L: soc-camera: remove now unused soc-camera specific PM hooks [media] V4L: pxa-camera: switch to using standard PM hooks [media] NetUP Dual DVB-T/C CI RF: force card hardware revision by module param [media] Don't OOPS if videobuf_dvb_get_frontend return NULL [media] NetUP Dual DVB-T/C CI RF: load firmware according card revision [media] omap3isp: Support configurable HS/VS polarities ... Fix up conflicts: - arch/arm/mach-omap2/board-rx51-peripherals.c: cleanup regulator supply definitions in mach-omap2 vs OMAP3: RX-51: define vdds_csib regulator supply - drivers/staging/tm6000/tm6000-alsa.c (trivial)
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: Fix build breakage in xfs_iops.c when CONFIG_FS_POSIX_ACL is not set
-
git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6Linus Torvalds authored
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: ecryptfs: Make inode bdi consistent with superblock bdi eCryptfs: Unlock keys needed by ecryptfsd
-
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xenLinus Torvalds authored
* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/balloon: Fix compile errors - missing header files. xen/grant: Fix compile warning. xen/pciback: remove duplicated #include
-
Greg Dietsche authored
remove unnecessary code that matches this coccinelle pattern if (...) return ret; return ret; Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
James Bottomley authored
Fixes this: drivers/char/ramoops.c: In function 'ramoops_init': drivers/char/ramoops.c:221: error: implicit declaration of function 'IS_ERR' drivers/char/ramoops.c:222: error: implicit declaration of function 'PTR_ERR' If it actually builds on other platforms, it's probably getting linux/err.h via some other #include. Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: remove printks about disabled bridge windows PCI: fold pci_calc_resource_flags() into decode_bar() PCI: treat mem BAR type "11" (reserved) as 32-bit, not 64-bit, BAR PCI: correct pcie_set_readrq write size PCI: pciehp: change wait time for valid configuration access x86/PCI: Preserve existing pci=bfsort whitelist for Dell systems PCI: ARI is a PCIe v2 feature x86/PCI: quirks: Use pci_dev->revision PCI: Make the struct pci_dev * argument of pci_fixup_irqs const. PCI hotplug: cpqphp: use pci_dev->vendor PCI hotplug: cpqphp: use pci_dev->subsystem_{vendor|device} x86/PCI: config space accessor functions should not ignore the segment argument PCI: Assign values to 'pci_obff_signal_type' enumeration constants x86/PCI: reduce severity of host bridge window conflict warnings PCI: enumerate the PCI device only removed out PCI hieratchy of OS when re-scanning PCI PCI: PCIe AER: add aer_recover_queue x86/PCI: select direct access mode for mmconfig option PCI hotplug: Rename is_ejectable which also exists in dock.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xenLinus Torvalds authored
* 'upstream/xen-tracing2' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen/tracing: fix compile errors when tracing is disabled.
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-socLinus Torvalds authored
* 'at91/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: at91: add arch specific ioremap support at91: factorize sram init at91: move register clocks to soc generic init at91: move clock subsystem init to soc generic init at91: use structure to store the current soc at91: remove AT91_DBGU offset from dbgu register macro at91: factorize at91 interrupts init to soc at91: introduce commom AT91_BASE_SYS
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-socLinus Torvalds authored
* 'next/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (21 commits) arm/dt: tegra devicetree support arm/versatile: Add device tree support dt/irq: add irq_domain_generate_simple() helper irq: add irq_domain translation infrastructure dmaengine: imx-sdma: add device tree probe support dmaengine: imx-sdma: sdma_get_firmware does not need to copy fw_name dmaengine: imx-sdma: use platform_device_id to identify sdma version mmc: sdhci-esdhc-imx: add device tree probe support mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx() mmc: sdhci-esdhc-imx: do not reference platform data after probe mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5 net/fec: add device tree probe support net: ibm_newemac: convert it to use of_get_phy_mode dt/net: add helper function of_get_phy_mode net/fec: gasket needs to be enabled for some i.mx serial/imx: add device tree probe support serial/imx: get rid of the uses of cpu_is_mx1() arm/dt: Add dtb make rule arm/dt: Add skeleton dtsi file ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-socLinus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: ARM: zynq: remove incorrectly deleted file ARM: tegra: only select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-watchdog: (25 commits) watchdog: WatchDog Timer Driver Core - Add minimum and max timeout watchdog: WatchDog Timer Driver Core - Add ioctl call watchdog: WatchDog Timer Driver Core - Add nowayout feature watchdog: WatchDog Timer Driver Core - Add Magic Close feature watchdog: WatchDog Timer Driver Core - Add WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT ioctl watchdog: WatchDog Timer Driver Core - Add WDIOC_SETOPTIONS ioctl watchdog: WatchDog Timer Driver Core - Add WDIOC_KEEPALIVE ioctl watchdog: WatchDog Timer Driver Core - Add basic ioctl functionality watchdog: WatchDog Timer Driver Core - Add basic framework watchdog: hpwdt: add next gen HP servers watchdog: it8712f_wdt.c: improve includes watchdog: at91sam9/wdt: move register header to drivers watchdog: Add Xilinx watchdog timer driver watchdog: remove empty pm-functions watchdog: sp805: Flush posted writes in enable/disable. watchdog: sp805: Don't write 0 to the load value register. watchdog: imx2_wdt: add device tree probe support watchdog: s3c2410: Add support for device tree based probe watchdog: mpcore_wdt: Add suspend/resume support. watchdog: mtx1-wdt: use dev_{err,info} instead of printk() ...
-
Linus Torvalds authored
When commit 4e34e719 ("fs: take the ACL checks to common code") changed the xyz_check_acl() functions into the more natural xyz_get_acl() interface, we grew two copies of the #define ext2_get_acl NULL define for the non-acl case. Remove the extra one. Reported-by: Marco Stornelli <marco.stornelli@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 29 Jul, 2011 5 commits
-
-
Markus Trippelsdorf authored
commit 4e34e719, that takes the ACL checks to common code, accidentely broke the build when CONFIG_FS_POSIX_ACL is not set: CC fs/xfs/linux-2.6/xfs_iops.o fs/xfs/linux-2.6/xfs_iops.c:1025:14: error: ‘xfs_get_acl’ undeclared here (not in a function) Fix this by declaring xfs_get_acl a static inline function. Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Alex Elder <aelder@sgi.com>
-
Stephen Rothwell authored
drivers/media/rc/ir-mce_kbd-decoder.c:446:16: error: expected declaration specifiers or '...' before string constant drivers/media/rc/ir-mce_kbd-decoder.c:446:1: warning: data definition has no type or storage class drivers/media/rc/ir-mce_kbd-decoder.c:446:1: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/media/rc/ir-mce_kbd-decoder.c:446:16: warning: function declaration isn't a prototype drivers/media/rc/ir-mce_kbd-decoder.c:447:15: error: expected declaration specifiers or '...' before string constant drivers/media/rc/ir-mce_kbd-decoder.c:447:1: warning: data definition has no type or storage class drivers/media/rc/ir-mce_kbd-decoder.c:447:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/media/rc/ir-mce_kbd-decoder.c:447:15: warning: function declaration isn't a prototype drivers/media/rc/ir-mce_kbd-decoder.c:448:20: error: expected declaration specifiers or '...' before string constant drivers/media/rc/ir-mce_kbd-decoder.c:448:1: warning: data definition has no type or storage class drivers/media/rc/ir-mce_kbd-decoder.c:448:1: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/media/rc/ir-mce_kbd-decoder.c:448:20: warning: function declaration isn't a prototype Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Stephen Rothwell authored
drivers/media/video/ov5642.c:985:1: warning: data definition has no type or storage class drivers/media/video/ov5642.c:985:1: warning: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' drivers/media/video/ov5642.c:985:1: warning: parameter names (without types) in function declaration drivers/media/video/ov5642.c: In function 'ov5642_mod_init': drivers/media/video/ov5642.c:998:9: error: 'THIS_MODULE' undeclared (first use in this function) drivers/media/video/ov5642.c:998:9: note: each undeclared identifier is reported only once for each function it appears in drivers/media/video/ov5642.c: At top level: drivers/media/video/ov5642.c:1009:20: error: expected declaration specifiers or '...' before string constant drivers/media/video/ov5642.c:1009:1: warning: data definition has no type or storage class drivers/media/video/ov5642.c:1009:1: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/media/video/ov5642.c:1009:20: warning: function declaration isn't a prototype drivers/media/video/ov5642.c:1010:15: error: expected declaration specifiers or '...' before string constant drivers/media/video/ov5642.c:1010:1: warning: data definition has no type or storage class drivers/media/video/ov5642.c:1010:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/media/video/ov5642.c:1010:15: warning: function declaration isn't a prototype drivers/media/video/ov5642.c:1011:16: error: expected declaration specifiers or '...' before string constant drivers/media/video/ov5642.c:1011:1: warning: data definition has no type or storage class drivers/media/video/ov5642.c:1011:1: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/media/video/ov5642.c:1011:16: warning: function declaration isn't a prototype drivers/media/video/ov5642.c: In function 'ov5642_mod_init': drivers/media/video/ov5642.c:999:1: warning: control reaches end of non-void function Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Thieu Le authored
Make the inode mapping bdi consistent with the superblock bdi so that dirty pages are flushed properly. Signed-off-by: Thieu Le <thieule@chromium.org> Cc: <stable@kernel.org> [2.6.39+] Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
-
Tyler Hicks authored
Fixes a regression caused by b5695d04 Kernel keyring keys containing eCryptfs authentication tokens should not be write locked when calling out to ecryptfsd to wrap and unwrap file encryption keys. The eCryptfs kernel code can not hold the key's write lock because ecryptfsd needs to request the key after receiving such a request from the kernel. Without this fix, all file opens and creates will timeout and fail when using the eCryptfs PKI infrastructure. This is not an issue when using passphrase-based mount keys, which is the most widely deployed eCryptfs configuration. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Acked-by: Roberto Sassu <roberto.sassu@polito.it> Tested-by: Roberto Sassu <roberto.sassu@polito.it> Tested-by: Alexis Hafner1 <haf@zurich.ibm.com> Cc: <stable@kernel.org> [2.6.39+]
-
- 28 Jul, 2011 18 commits
-
-
Mauro Carvalho Chehab authored
The logic at em28xx_isoc_dvb_max_packetsize() sucks, at least for newer the needed packet size. Yet, it is better than nothing. Rewrite the code in order to change the default to 752 for em2884 and newer chips and provide a better way to handle per-chipset specifics. For em2874, the current default should be enough, as the only em2874 board is currently a 1-seg ISDB-T board, so, it needs only a limited amount of bandwidth. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
Currently, the driver assumes that all QAM carriers are spaced with 8MHz. This is wrong, and may decrease QoS on Countries like Brazil, that have DVB-C carriers with 6MHz-spaced. Fortunately, both ITU-T J-83 and EN 300 429 specifies a way to associate the symbol rate with the bandwidth needed for it. For ITU-T J-83 2007 annex A, the maximum symbol rate for 6 MHz is: 6 MHz / 1.15 = 5217391 Bauds For ITU-T J-83 2007 annex C, the maximum symbol rate for 6 MHz is: 6 MHz / 1.13 = 5309735 Bauds. As this tuner is currently used only for DRX-K, and it is currently hard-coded to annex A, I've opted to use the roll-off factor of 0.15, instead of 0.13. If we ever support annex C, the better would be to add a DVB S2API call to allow changing between Annex A and C, and add the 0.13 roll-off factor to it. This code is currently being used on other frontends, so I think we should later add a core function with this code, to warrant that it will be properly implemented everywhere. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Arnd Bergmann authored
My previous commit left the file empty and present in the Makefile, which is a bit dirty and caused problems with 'make distclean', as pointed out by David Howells. This hopefully cleans it up the right way. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David Howells <dhowells@redhat.com> Acked-by: John Linn <john.linn@xilinx.com>
-
Arnd Bergmann authored
-
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
instead of reading the registers everytime the current implementation respect the following constrain: - allow 1 to n soc to be enabled - allow to have a virtual cpu type and subtype - always detect the cpu type and subtype and report it - detect if the soc support is enabled - prepare for sysfs export support - drop soc specific code via compiler when the soc not enabled (via cpu_is_xxx) Today if we read the exid we will have the same value for 9g35 and 9m11 and we will need to check the cidr too with the new implementation we just need to check the soc subtype this will also allow to have specific virtual subtype for rm9200 which the board will have to specify via at91rm9200_set_type(int) as we have no way to detect it. this implementation is inspired by the SH cpu detection support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
to make the soc base specified at runtime instead of compiled time Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
they are the same except the default priority Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
-
Jean-Christophe PLAGNIOL-VILLARD authored
On all at91 except rm9200 and x40 have the System Controller starts at address 0xffffc000 and has a size of 16KiB. On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting at 0xfffff000 This patch removes the individual definitions of AT91_BASE_SYS and replaces them with a common version at base 0xfffffc000 and size 16KiB and map the same memory space Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: n2_crypto: Attach on Niagara-T3. n2rng: Attach on Niagara-T3. sparc: Detect and handle UltraSPARC-T3 cpu types. sparc: Don't do expensive hypervisor PCR write unless necessary. sparc: Add T3 sun4v cpu type and hypervisor group defines. sparc: Don't leave sparc_pmu_type NULL on sun4v.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (32 commits) tg3: Remove 5719 jumbo frames and TSO blocks tg3: Break larger frags into 4k chunks for 5719 tg3: Add tx BD budgeting code tg3: Consolidate code that calls tg3_tx_set_bd() tg3: Add partial fragment unmapping code tg3: Generalize tg3_skb_error_unmap() tg3: Remove short DMA check for 1st fragment tg3: Simplify tx bd assignments tg3: Reintroduce tg3_tx_ring_info ASIX: Use only 11 bits of header for data size ASIX: Simplify condition in rx_fixup() Fix cdc-phonet build bonding: reduce noise during init bonding: fix string comparison errors net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared net: add IFF_SKB_TX_SHARED flag to priv_flags net: sock_sendmsg_nosec() is static forcedeth: fix vlans gianfar: fix bug caused by 87c288c6 gro: Only reset frag0 when skb can be pulled ...
-
git://neil.brown.name/mdLinus Torvalds authored
* 'for-linus' of git://neil.brown.name/md: (75 commits) md/raid10: handle further errors during fix_read_error better. md/raid10: Handle read errors during recovery better. md/raid10: simplify read error handling during recovery. md/raid10: record bad blocks due to write errors during resync/recovery. md/raid10: attempt to fix read errors during resync/check md/raid10: Handle write errors by updating badblock log. md/raid10: clear bad-block record when write succeeds. md/raid10: avoid writing to known bad blocks on known bad drives. md/raid10 record bad blocks as needed during recovery. md/raid10: avoid reading known bad blocks during resync/recovery. md/raid10 - avoid reading from known bad blocks - part 3 md/raid10: avoid reading from known bad blocks - part 2 md/raid10: avoid reading from known bad blocks - part 1 md/raid10: Split handle_read_error out from raid10d. md/raid10: simplify/reindent some loops. md/raid5: Clear bad blocks on successful write. md/raid5. Don't write to known bad block on doubtful devices. md/raid5: write errors should be recorded as bad blocks if possible. md/raid5: use bad-block log to improve handling of uncorrectable read errors. md/raid5: avoid reading from known bad blocks. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: sound: oss: rename local change_bits to avoid powerpc bitsops.h definition ALSA: hda - Fix duplicated DAC assignments for Realtek ALSA: asihpi - off by one in asihpi_hpi_ioctl() ALSA: hda - Fix Oops with Realtek quirks with NULL adc_nids ALSA: asihpi - bug fix pa use before init. ALSA: hda - Add support for vref-out based mute LED control on IDT codecs
-
David S. Miller authored
A small modification was necessary since in the machine description for 'n2cp' and 'ncp' nodes, there no longer is an 'intr' property. That's OK because this property was always nothing more than an array of integers '1' ... 'nr_inos + 1' so we can just compute it in-place. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
And stop referring to Victoria Falls, as the attribute we're talking about is whether the rng is multi-unit capable which applies to several chip variants now. Signed-off-by: David S. Miller <davem@davemloft.net>
-