- 28 Mar, 2019 10 commits
-
-
Tyrel Datwyler authored
No change to functionality. Simply make transport event messages a little clearer, and rework CRQ format enums such that we have separate enums for INIT messages and XPORT events. [mkp: typo] Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Tyrel Datwyler authored
Status and error codes are returned in big endian from the VIOS. The values are translated into a human readable format when logged, but the values are also logged. This patch byte swaps those values so that they are consistent between BE and LE platforms. Signed-off-by:
-
Tyrel Datwyler authored
The VIOS uses the SCSI_ERROR class to report PRLI failures. These errors are indicated with the combination of a IBMVFC_FC_SCSI_ERROR return status and 0x8000 error code. Add these codes to cmd_status[] with appropriate human readable error message. Signed-off-by:
-
Tyrel Datwyler authored
The text of messages logged with ibmvfc_log_error() always contain the term "failed". In the case of cancelled commands during EH they are reported back by the VIOS using error codes. This can be confusing to somebody looking at these log messages as to whether a command was successfully cancelled. The following real log message for example it is unclear if the transaction was actaully cancelled. <6>sd 0:0:1:1: Cancelling outstanding commands. <3>sd 0:0:1:1: [sde] Command (28) failed: transaction cancelled (2:6) flags: 0 fcp_rsp: 0, resid=0, scsi_status: 0 Remove prefixing of "failed" to all error logged messages. The ibmvfc_log_error() function translates the returned error/status codes to a human readable message already. Signed-off-by:
-
Steffen Maier authored
If an incoming ELS of type RSCN contains more than one element, zfcp suboptimally causes repeated erp trigger NOP trace records for each previously failed port. These could be ports that went away. It loops over each RSCN element, and for each of those in an inner loop over all zfcp_ports. The trigger to recover failed ports should be just the reception of some RSCN, no matter how many elements it has. So we can loop over failed ports separately, and only then loop over each RSCN element to handle the non-failed ports. The call chain was: zfcp_fc_incoming_rscn for (i = 1; i < no_entries; i++) _zfcp_fc_incoming_rscn list_for_each_entry(port, &adapter->port_list, list) if (masked port->d_id match) zfcp_fc_test_link if (!port->d_id) zfcp_erp_port_reopen "fcrscn1" <=== In order the reduce the "flooding" of the REC trace area in such cases, we factor out handling the failed ports to be outside of the entries loop: zfcp_fc_incoming_rscn if (no_entries > 1) <=== list_for_each_entry(port, &adapter->port_list, list) <=== if (!port->d_id) zfcp_erp_port_reopen "fcrscn1" <=== for (i = 1; i < no_entries; i++) _zfcp_fc_incoming_rscn list_for_each_entry(port, &adapter->port_list, list) if (masked port->d_id match) zfcp_fc_test_link Abbreviated example trace records before this code change: Tag : fcrscn1 WWPN : 0x500507630310d327 ERP want : 0x02 ERP need : 0x02 Tag : fcrscn1 WWPN : 0x500507630310d327 ERP want : 0x02 ERP need : 0x00 NOP => superfluous trace record The last trace entry repeats if there are more than 2 RSCN elements. Signed-off-by:Steffen Maier <maier@linux.ibm.com> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Reviewed-by:
Jens Remus <jremus@linux.ibm.com> Signed-off-by:
-
Steffen Maier authored
Suppose more than one non-NPIV FCP device is active on the same channel. Send I/O to storage and have some of the pending I/O run into a SCSI command timeout, e.g. due to bit errors on the fibre. Now the error situation stops. However, we saw FCP requests continue to timeout in the channel. The abort will be successful, but the subsequent TUR fails. Scsi_eh starts. The LUN reset fails. The target reset fails. The host reset only did an FCP device recovery. However, for non-NPIV FCP devices, this does not close and reopen ports on the SAN-side if other non-NPIV FCP device(s) share the same open ports. In order to resolve the continuing FCP request timeouts, we need to explicitly close and reopen ports on the SAN-side. This was missing since the beginning of zfcp in v2.6.0 history commit ea127f97 ("[PATCH] s390 (7/7): zfcp host adapter."). Note: The FSF requests for forced port reopen could run into FSF request timeouts due to other reasons. This would trigger an internal FCP device recovery. Pending forced port reopen recoveries would get dismissed. So some ports might not get fully reopened during this host reset handler. However, subsequent I/O would trigger the above described escalation and eventually all ports would be forced reopen to resolve any continuing FCP request timeouts due to earlier bit errors. Signed-off-by:
-
Steffen Maier authored
An already deleted SCSI device can exist on the Scsi_Host and remain there because something still holds a reference. A new SCSI device with the same H:C:T:L and FCP device, target port WWPN, and FCP LUN can be created. When we try to unblock an rport, we still find the deleted SCSI device and return early because the zfcp_scsi_dev of that SCSI device is not ZFCP_STATUS_COMMON_UNBLOCKED. Hence we miss to unblock the rport, even if the new proper SCSI device would be in good state. Therefore, skip deleted SCSI devices when iterating the sdevs of the shost. [cf. __scsi_device_lookup{_by_target}() or scsi_device_get()] The following abbreviated trace sequence can indicate such problem: Area : REC Tag : ersfs_3 LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x40000000 not ZFCP_STATUS_COMMON_UNBLOCKED Ready count : n not incremented yet Running count : 0x00000000 ERP want : 0x01 ERP need : 0xc1 ZFCP_ERP_ACTION_NONE Area : REC Tag : ersfs_3 LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x41000000 Ready count : n+1 Running count : 0x00000000 ERP want : 0x01 ERP need : 0x01 ... Area : REC Level : 4 only with increased trace level Tag : ertru_l LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x40000000 Request ID : 0x0000000000000000 ERP status : 0x01800000 ERP step : 0x1000 ERP action : 0x01 ERP count : 0x00 NOT followed by a trace record with tag "scpaddy" for WWPN 0x50050763031bd327. Signed-off-by: -
Martin K. Petersen authored
Commit a83da8a4 ("scsi: sd: Optimal I/O size should be a multiple of physical block size") split one conditional into several separate statements in an effort to provide more accurate warning messages when a device reports a nonsensical value. However, this reorganization accidentally dropped the precondition of the reported value being larger than zero. This lead to a warning getting emitted on devices that do not report an optimal I/O size at all. Remain silent if a device does not report an optimal I/O size. Fixes: a83da8a4 ("scsi: sd: Optimal I/O size should be a multiple of physical block size") Cc: Randy Dunlap <rdunlap@infradead.org> Cc: <stable@vger.kernel.org> Reported-by:
Hussam Al-Tayeb <ht990332@gmx.com> Tested-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Bart Van Assche authored
The scsi_end_request() function calls scsi_cmd_to_driver() indirectly and hence needs the disk->private_data pointer. Avoid that that pointer is cleared before all affected I/O requests have finished. This patch avoids that the following crash occurs: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: scsi_mq_uninit_cmd+0x1c/0x30 scsi_end_request+0x7c/0x1b8 scsi_io_completion+0x464/0x668 scsi_finish_command+0xbc/0x160 scsi_eh_flush_done_q+0x10c/0x170 sas_scsi_recover_host+0x84c/0xa98 [libsas] scsi_error_handler+0x140/0x5b0 kthread+0x100/0x12c ret_from_fork+0x10/0x18 Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Jason Yan <yanaijie@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
zhengbin authored
Use dd to test a SCSI device: 1. echo "blocked" >/sys/block/sda/device/state 2. dd if=/dev/sda of=/mnt/t.log bs=1M count=10 3. echo "running" >/sys/block/sda/device/state dd should finish this work after step 3, but it hangs. After step2, the call chain is this: blk_mq_dispatch_rq_list-->scsi_queue_rq-->prep_to_mq prep_to_mq will return BLK_STS_RESOURCE, and scsi_queue_rq will transition it to BLK_STS_DEV_RESOURCE which means that driver can guarantee that IO dispatch will be triggered in future when the resource is available. Need to follow the rule if we set the device state to running. [mkp: tweaked commit description and code comment as suggested by Bart] Signed-off-by:
zhengbin <zhengbin13@huawei.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
- 26 Mar, 2019 3 commits
-
-
Kangjie Lu authored
In case iscsi_lookup_endpoint fails, the fix returns -EINVAL to avoid NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Acked-by:
Manish Rangankar <mrangankar@marvell.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
-
Dave Carroll authored
There are a few windows during AER/EEH when we can access PCIe I/O mapped registers. This will harden the access to insure we do not allow PCIe access during errors Signed-off-by:
Dave Carroll <david.carroll@microsemi.com> Reviewed-by:
Sagar Biradar <sagar.biradar@microchip.com> Signed-off-by:
-
Sreekanth Reddy authored
During expander reset handling, the driver invokes kernel function scsi_host_find_tag() to obtain outstanding requests associated with the scsi host managed by the driver. Driver loops from tag value zero to hba queue depth to obtain the outstanding scmds. But when blk-mq is enabled, the block layer may return stale entry for one or more requests. This may lead to kernel panic if the returned value is inaccessible or the memory pointed by the returned value is reused. Reference of upstream discussion: https://patchwork.kernel.org/patch/10734933/ Instead of calling scsi_host_find_tag() API for each and every smid (smid is tag +1) from one to shost->can_queue, now driver will call this API (to obtain the outstanding scmd) only for those smid's which are outstanding at the driver level. Driver will determine whether this smid is outstanding at driver level by looking into it's corresponding MPI request frame, if its MPI request frame is empty, then it means that this smid is free and does not need to call scsi_host_find_tag() for it. By doing this, driver will invoke scsi_host_find_tag() for only those tags which are outstanding at the driver level. Driver will check whether particular MPI request frame is empty or not by looking into the "DevHandle" field. If this field is zero then it means that this MPI request is empty. For active MPI request DevHandle must be non-zero. Also driver will memset the MPI request frame once the corresponding scmd is processed (i.e. just before calling scmd->done function). Signed-off-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
-
- 21 Mar, 2019 2 commits
-
-
Tyrel Datwyler authored
The event pool used for queueing commands is destroyed fairly early in the ibmvscsi_remove() code path. Since, this happens prior to the call so scsi_remove_host() it is possible for further calls to queuecommand to be processed which manifest as a panic due to a NULL pointer dereference as seen here: PANIC: "Unable to handle kernel paging request for data at address 0x00000000" Context process backtrace: DSISR: 0000000042000000 ????Syscall Result: 0000000000000000 4 [c000000002cb3820] memcpy_power7 at c000000000064204 [Link Register] [c000000002cb3820] ibmvscsi_send_srp_event at d000000003ed14a4 5 [c000000002cb3920] ibmvscsi_send_srp_event at d000000003ed14a4 [ibmvscsi] ?(unreliable) 6 [c000000002cb39c0] ibmvscsi_queuecommand at d000000003ed2388 [ibmvscsi] 7 [c000000002cb3a70] scsi_dispatch_cmd at d00000000395c2d8 [scsi_mod] 8 [c000000002cb3af0] scsi_request_fn at d00000000395ef88 [scsi_mod] 9 [c000000002cb3be0] __blk_run_queue at c000000000429860 10 [c000000002cb3c10] blk_delay_work at c00000000042a0ec 11 [c000000002cb3c40] process_one_work at c0000000000dac30 12 [c000000002cb3cd0] worker_thread at c0000000000db110 13 [c000000002cb3d80] kthread at c0000000000e3378 14 [c000000002cb3e30] ret_from_kernel_thread at c00000000000982c The kernel buffer log is overfilled with this log: [11261.952732] ibmvscsi: found no event struct in pool! This patch reorders the operations during host teardown. Start by calling the SRP transport and Scsi_Host remove functions to flush any outstanding work and set the host offline. LLDD teardown follows including destruction of the event pool, freeing the Command Response Queue (CRQ), and unmapping any persistent buffers. The event pool destruction is protected by the scsi_host lock, and the pool is purged prior of any requests for which we never received a response. Finally, move the removal of the scsi host from our global list to the end so that the host is easily locatable for debugging purposes during teardown. Cc: <stable@vger.kernel.org> # v2.6.12+ Signed-off-by:
-
Tyrel Datwyler authored
For each ibmvscsi host created during a probe or destroyed during a remove we either add or remove that host to/from the global ibmvscsi_head list. This runs the risk of concurrent modification. This patch adds a simple spinlock around the list modification calls to prevent concurrent updates as is done similarly in the ibmvfc driver and ipr driver. Fixes: 32d6e4b6 ("scsi: ibmvscsi: add vscsi hosts to global list_head") Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by:
-
- 20 Mar, 2019 1 commit
-
-
Luo Jiaxing authored
We found out that for v2 hw, a SATA disk can not be written to after the system comes up. In commit ffb1c820 ("scsi: hisi_sas: remove the check of sas_dev status in hisi_sas_I_T_nexus_reset()"), we introduced a path where we may issue an internal abort for a SATA device, but without following it with a softreset. We need to always follow an internal abort with a software reset, as per HW programming flow, so add this. Fixes: ffb1c820 ("scsi: hisi_sas: remove the check of sas_dev status in hisi_sas_I_T_nexus_reset()") Signed-off-by:
Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
- 19 Mar, 2019 4 commits
-
-
Himanshu Madhani authored
This patch fixes crash due to NULL pointer derefrence because CPU pointer is not set and used by driver. Instead, driver is passes CPU as tag via ha->isp_ops->{lun_reset|target_reset} [ 30.160780] qla2xxx [0000:a0:00.1]-8038:9: Cable is unplugged... [ 69.984045] qla2xxx [0000:a0:00.0]-8009:8: DEVICE RESET ISSUED nexus=8:0:0 cmd=00000000b0d62f46. [ 69.992849] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 [ 70.000680] PGD 0 P4D 0 [ 70.003232] Oops: 0000 [#1] SMP PTI [ 70.006727] CPU: 2 PID: 6714 Comm: sg_reset Kdump: loaded Not tainted 4.18.0-67.el8.x86_64 #1 [ 70.015258] Hardware name: NEC Express5800/T110j [N8100-2758Y]/MX32-PH0-NJ, BIOS F11 02/13/2019 [ 70.024016] RIP: 0010:blk_mq_rq_cpu+0x9/0x10 [ 70.028315] Code: 01 58 01 00 00 48 83 c0 28 48 3d 80 02 00 00 75 ab c3 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 47 08 <8b> 40 40 c3 0f 1f 00 0f 1f 44 00 00 48 83 ec 10 48 c7 c6 20 6e 7c [ 70.047087] RSP: 0018:ffff99a481487d58 EFLAGS: 00010246 [ 70.052322] RAX: 0000000000000000 RBX: ffffffffc041b08b RCX: 0000000000000000 [ 70.059466] RDX: 0000000000000000 RSI: ffff8d10b6b16898 RDI: ffff8d10b341e400 [ 70.066615] RBP: ffffffffc03a6bd0 R08: 0000000000000415 R09: 0000000000aaaaaa [ 70.073765] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8d10b341e528 [ 70.080914] R13: ffff8d10aadefc00 R14: ffff8d0f64efa998 R15: ffff8d0f64efa000 [ 70.088083] FS: 00007f90a201e540(0000) GS:ffff8d10b6b00000(0000) knlGS:0000000000000000 [ 70.096188] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 70.101959] CR2: 0000000000000040 CR3: 0000000268886005 CR4: 00000000003606e0 [ 70.109127] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 70.116277] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 70.123425] Call Trace: [ 70.125896] __qla2xxx_eh_generic_reset+0xb1/0x220 [qla2xxx] [ 70.131572] scsi_ioctl_reset+0x1f5/0x2a0 [ 70.135600] scsi_ioctl+0x18e/0x397 [ 70.139099] ? sd_ioctl+0x7c/0x100 [sd_mod] [ 70.143287] blkdev_ioctl+0x32b/0x9f0 [ 70.146954] ? __check_object_size+0xa3/0x181 [ 70.151323] block_ioctl+0x39/0x40 [ 70.154735] do_vfs_ioctl+0xa4/0x630 [ 70.158322] ? syscall_trace_enter+0x1d3/0x2c0 [ 70.162769] ksys_ioctl+0x60/0x90 [ 70.166104] __x64_sys_ioctl+0x16/0x20 [ 70.169859] do_syscall_64+0x5b/0x1b0 [ 70.173532] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 70.178587] RIP: 0033:0x7f90a1b3445b [ 70.182183] Code: 0f 1e fa 48 8b 05 2d aa 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd a9 2c 00 f7 d8 64 89 01 48 [ 70.200956] RSP: 002b:00007fffdca88b68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 70.208535] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f90a1b3445b [ 70.215684] RDX: 00007fffdca88b84 RSI: 0000000000002284 RDI: 0000000000000003 [ 70.222833] RBP: 00007fffdca88ca8 R08: 00007fffdca88b84 R09: 0000000000000000 [ 70.229981] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fffdca88b84 [ 70.237131] R13: 0000000000000000 R14: 000055ab09b0bd28 R15: 0000000000000000 [ 70.244284] Modules linked in: nft_chain_route_ipv4 xt_CHECKSUM nft_chain_nat_ipv4 ipt_MASQUERADE nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c ipt_REJECT nf_reject_ipv4 nft_counter nft_compat tun bridge stp llc nf_tables nfnetli nk devlink sunrpc vfat fat intel_rapl intel_pmc_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm wmi_bmof iTCO_wdt iTCO_ vendor_support irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ipmi_ssif intel_cstate intel_uncore intel_rapl_perf ipmi_si jo ydev pcspkr ipmi_devintf sg wmi ipmi_msghandler video acpi_power_meter acpi_pad mei_me i2c_i801 mei ip_tables ext4 mbcache jbd2 sr_mod cd rom sd_mod qla2xxx ast i2c_algo_bit drm_kms_helper nvme_fc syscopyarea sysfillrect uas sysimgblt fb_sys_fops nvme_fabrics ttm [ 70.314805] usb_storage nvme_core crc32c_intel scsi_transport_fc ahci drm libahci tg3 libata megaraid_sas pinctrl_cannonlake pinctrl_ intel [ 70.327335] CR2: 0000000000000040 Fixes: 9cf2bab6 ("block: kill request ->cpu member") Signed-off-by:Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Quinn Tran authored
Commit 7f147f9b ("scsi: qla2xxx: Fix N2N target discovery with Local loop") fixed N2N target discovery for local loop. However, same code is used for FC-AL discovery as well. Added check to make sure we are bypassing area and domain check only in N2N topology for target discovery. Fixes: 7f147f9b ("scsi: qla2xxx: Fix N2N target discovery with Local loop") Cc: stable@vger.kernel.org # 5.0+ Signed-off-by:
Quinn Tran <qtran@marvell.com> Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
Bart Van Assche authored
Since scsi_device_quiesce() skips SCSI devices that have another state than RUNNING, OFFLINE or TRANSPORT_OFFLINE, scsi_device_resume() should not complain about SCSI devices that have been skipped. Hence this patch. This patch avoids that the following warning appears during resume: WARNING: CPU: 3 PID: 1039 at blk_clear_pm_only+0x2a/0x30 CPU: 3 PID: 1039 Comm: kworker/u8:49 Not tainted 5.0.0+ #1 Hardware name: LENOVO 4180F42/4180F42, BIOS 83ET75WW (1.45 ) 05/10/2013 Workqueue: events_unbound async_run_entry_fn RIP: 0010:blk_clear_pm_only+0x2a/0x30 Call Trace: ? scsi_device_resume+0x28/0x50 ? scsi_dev_type_resume+0x2b/0x80 ? async_run_entry_fn+0x2c/0xd0 ? process_one_work+0x1f0/0x3f0 ? worker_thread+0x28/0x3c0 ? process_one_work+0x3f0/0x3f0 ? kthread+0x10c/0x130 ? __kthread_create_on_node+0x150/0x150 ? ret_from_fork+0x1f/0x30 Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Martin Steigerwald <martin@lichtvoll.de> Cc: <stable@vger.kernel.org> Reported-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Tested-by:
-
Bart Van Assche authored
cmd->rcu is initialized by scsi_initialize_rq(). For passthrough requests, blk_get_request() calls scsi_initialize_rq(). For filesystem requests, scsi_init_command() calls scsi_initialize_rq(). Make sure that destroy_rcu_head() is called for passthrough requests. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Ewan D. Milne <emilne@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Reported-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
- 18 Mar, 2019 1 commit
-
-
Maurizio Lombardi authored
In some cases, the iscsi_remove_session() function is called while an unbind_work operation is still running. This may cause a situation where sysfs objects are removed in an incorrect order, triggering a kernel warning. [ 605.249442] ------------[ cut here ]------------ [ 605.259180] sysfs group 'power' not found for kobject 'target2:0:0' [ 605.321371] WARNING: CPU: 1 PID: 26794 at fs/sysfs/group.c:235 sysfs_remove_group+0x76/0x80 [ 605.341266] Modules linked in: dm_service_time target_core_user target_core_pscsi target_core_file target_core_iblock iscsi_target_mod target_core_mod nls_utf8 isofs ppdev bochs_drm nfit ttm libnvdimm drm_kms_helper syscopyarea sysfillrect sysimgblt joydev pcspkr fb_sys_fops drm i2c_piix4 sg parport_pc parport xfs libcrc32c dm_multipath sr_mod sd_mod cdrom ata_generic 8021q garp mrp ata_piix stp crct10dif_pclmul crc32_pclmul llc libata crc32c_intel virtio_net net_failover ghash_clmulni_intel serio_raw failover sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi [ 605.627479] CPU: 1 PID: 26794 Comm: kworker/u32:2 Not tainted 4.18.0-60.el8.x86_64 #1 [ 605.721401] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014 [ 605.823651] Workqueue: scsi_wq_2 __iscsi_unbind_session [scsi_transport_iscsi] [ 605.830940] RIP: 0010:sysfs_remove_group+0x76/0x80 [ 605.922907] Code: 48 89 df 5b 5d 41 5c e9 38 c4 ff ff 48 89 df e8 e0 bf ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 38 73 cb a7 e8 24 77 d7 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 00 0f 1f 44 00 00 41 56 41 55 41 54 55 [ 606.122304] RSP: 0018:ffffbadcc8d1bda8 EFLAGS: 00010286 [ 606.218492] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 606.326381] RDX: ffff98bdfe85eb40 RSI: ffff98bdfe856818 RDI: ffff98bdfe856818 [ 606.514498] RBP: ffffffffa7ab73e0 R08: 0000000000000268 R09: 0000000000000007 [ 606.529469] R10: 0000000000000000 R11: ffffffffa860d9ad R12: ffff98bdf978e838 [ 606.630535] R13: ffff98bdc2cd4010 R14: ffff98bdc2cd3ff0 R15: ffff98bdc2cd4000 [ 606.824707] FS: 0000000000000000(0000) GS:ffff98bdfe840000(0000) knlGS:0000000000000000 [ 607.018333] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 607.117844] CR2: 00007f84b78ac024 CR3: 000000002c00a003 CR4: 00000000003606e0 [ 607.117844] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 607.420926] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 607.524236] Call Trace: [ 607.530591] device_del+0x56/0x350 [ 607.624393] ? ata_tlink_match+0x30/0x30 [libata] [ 607.727805] ? attribute_container_device_trigger+0xb4/0xf0 [ 607.829911] scsi_target_reap_ref_release+0x39/0x50 [ 607.928572] scsi_remove_target+0x1a2/0x1d0 [ 608.017350] __iscsi_unbind_session+0xb3/0x160 [scsi_transport_iscsi] [ 608.117435] process_one_work+0x1a7/0x360 [ 608.132917] worker_thread+0x30/0x390 [ 608.222900] ? pwq_unbound_release_workfn+0xd0/0xd0 [ 608.323989] kthread+0x112/0x130 [ 608.418318] ? kthread_bind+0x30/0x30 [ 608.513821] ret_from_fork+0x35/0x40 [ 608.613909] ---[ end trace 0b98c310c8a6138c ]--- Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Acked-by:
Chris Leech <cleech@redhat.com> Signed-off-by:
-
- 17 Mar, 2019 14 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - add more Build-Depends to Debian source package - prefix header search paths with $(srctree)/ - make modpost show verbose section mismatch warnings - avoid hard-coded CROSS_COMPILE for h8300 - fix regression for Debian make-kpkg command - add semantic patch to detect missing put_device() - fix some warnings of 'make deb-pkg' - optimize NOSTDINC_FLAGS evaluation - add warnings about redundant generic-y - clean up Makefiles and scripts * tag 'kbuild-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove stale lxdialog/.gitignore kbuild: force all architectures except um to include mandatory-y kbuild: warn redundant generic-y Revert "modsign: Abort modules_install when signing fails" kbuild: Make NOSTDINC_FLAGS a simply expanded variable kbuild: deb-pkg: avoid implicit effects coccinelle: semantic code search for missing put_device() kbuild: pkg: grep include/config/auto.conf instead of $KCONFIG_CONFIG kbuild: deb-pkg: introduce is_enabled and if_enabled_echo to builddeb kbuild: deb-pkg: add CONFIG_ prefix to kernel config options kbuild: add workaround for Debian make-kpkg kbuild: source include/config/auto.conf instead of ${KCONFIG_CONFIG} unicore32: simplify linker script generation for decompressor h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- kbuild: move archive command to scripts/Makefile.lib modpost: always show verbose warning for section mismatch ia64: prefix header search path with $(srctree)/ libfdt: prefix header search paths with $(srctree)/ deb-pkg: generate correct build dependencies
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 asm updates from Thomas Gleixner: "Two cleanup patches removing dead conditionals and unused code" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Remove unused __constant_c_x_memset() macro and inlines x86/asm: Remove dead __GNUC__ conditionals
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "Three fixes for the fallout from the TSX errata workaround: - Prevent memory corruption caused by a unchecked out of bound array index. - Two trivial fixes to address compiler warnings" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Make dev_attr_allow_tsx_force_abort static perf/x86: Fixup typo in stub functions perf/x86/intel: Fix memory corruption -
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fix from Juergen Gross: "A fix for a Xen bug introduced by David's series for excluding ballooned pages in vmcores" * tag 'for-linus-5.1b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: Fix mapping PG_offline pages to user space
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: "Here is a 9p update for 5.1; there honestly hasn't been much. Two fixes (leak on invalid mount argument and possible deadlock on i_size update on 32bit smp) and a fall-through warning cleanup" * tag '9p-for-5.1' of git://github.com/martinetd/linux: 9p/net: fix memory leak in p9_client_create 9p: use inode->i_lock to protect i_size_write() under 32-bit 9p: mark expected switch fall-through
-
kbuild test robot authored
Fixes: 400816f6 ("perf/x86/intel: Implement support for TSX Force Abort") Signed-off-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: kbuild-all@01.org Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190313184243.GA10820@lkp-sb-ep06
-
Masahiro Yamada authored
When this .gitignore was added, lxdialog was an independent hostprogs-y. Now that all objects in lxdialog/ are directly linked to mconf, the lxdialog is no longer generated. Signed-off-by:Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes the common Kbuild.asm file. Factor out the duplicated include directives to scripts/Makefile.asm-generic so that no architecture would opt out of the mandatory-y mechanism. um is not forced to include mandatory-y since it is a very exceptional case which does not support UAPI. Signed-off-by: -
Masahiro Yamada authored
The generic-y is redundant under the following condition: - arch has its own implementation - the same header is added to generated-y - the same header is added to mandatory-y If a redundant generic-y is found, the warning like follows is displayed: scripts/Makefile.asm-generic:20: redundant generic-y found in arch/arm/include/asm/Kbuild: timex.h I fixed up arch Kbuild files found by this. Suggested-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Douglas Anderson authored
This reverts commit caf6fe91. The commit was fine but is no longer needed as of commit 3a2429e1 ("kbuild: change if_changed_rule for multi-line recipe"). Let's go back to using ";" to be consistent. For some discussion, see: https://lkml.kernel.org/r/CAK7LNASde0Q9S5GKeQiWhArfER4S4wL1=R_FW8q0++_X3T5=hQ@mail.gmail.comSigned-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Douglas Anderson authored
During a simple no-op (nothing changed) build I saw 39 invocations of the C compiler with the argument "-print-file-name=include". We don't need to call the C compiler 39 times for this--one time will suffice. Let's change NOSTDINC_FLAGS to a simply expanded variable to avoid this since there doesn't appear to be any reason it should be recursively expanded. On my build this shaved ~400 ms off my "no-op" build. Note that the recursive expansion seems to date back to the (really old) commit e8f5bdb0 ("[PATCH] Makefile include path ordering"). It's a little unclear to me if the point of that patch was to switch the variable to be recursively expanded (which it did) or to avoid directly assigning to NOSTDINC_FLAGS (AKA to switch to +=) because someone else (out of tree?) was setting it. I presume later since if the only goal was to switch to recursive expansion the patch would have just removed the ":". Signed-off-by:
-
Arseny Maslennikov authored
* The man page for dpkg-source(1) notes: > -b, --build directory [format-specific-parameters] > Build a source package (--build since dpkg 1.17.14). > <...> > > dpkg-source will build the source package with the first > format found in this ordered list: the format indicated > with the --format command line option, the format > indicated in debian/source/format, “1.0”. The fallback > to “1.0” is deprecated and will be removed at some point > in the future, you should always document the desired > source format in debian/source/format. See section > SOURCE PACKAGE FORMATS for an extensive description of > the various source package formats. Thus it would be more foolproof to explicitly use 1.0 (as we always did) than to rely on dpkg-source's defaults. * In a similar vein, debian/rules is not made executable by mkdebian, and dpkg-source warns about that but still silently fixes the file. Let's be explicit once again. Signed-off-by:
Arseny Maslennikov <ar@cs.msu.ru> Signed-off-by:
-
Wen Yang authored
The of_find_device_by_node() takes a reference to the underlying device structure, we should release that reference. The implementation of this semantic code search is: In a function, for a local variable returned by calling of_find_device_by_node(), a, if it is released by a function such as put_device()/of_dev_put()/platform_device_put() after the last use, it is considered that there is no reference leak; b, if it is passed back to the caller via dev_get_drvdata()/platform_get_drvdata()/get_device(), etc., the reference will be released in other functions, and the current function also considers that there is no reference leak; c, for the rest of the situation, the current function should release the reference by calling put_device, this code search will report the corresponding error message. By using this semantic code search, we have found some object reference leaks, such as: commit 11907e9d ("ASoC: fsl-asoc-card: fix object reference leaks in fsl_asoc_card_probe") commit a12085d1 ("mtd: rawnand: atmel: fix possible object reference leak") commit 11493f26 ("mtd: rawnand: jz4780: fix possible object reference leak") There are still dozens of reference leaks in the current kernel code. Further, for the case of b, the object returned to other functions may also have a reference leak, we will continue to develop other cocci scripts to further check the reference leak. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Reviewed-by:
Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by:
Markus Elfring <Markus.Elfring@web.de> Signed-off-by:
-
- 16 Mar, 2019 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull pidfd system call from Christian Brauner: "This introduces the ability to use file descriptors from /proc/<pid>/ as stable handles on struct pid. Even if a pid is recycled the handle will not change. For a start these fds can be used to send signals to the processes they refer to. With the ability to use /proc/<pid> fds as stable handles on struct pid we can fix a long-standing issue where after a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. With this patchset we enable a variety of use cases. One obvious example is that we can now safely delegate an important part of process management - sending signals - to processes other than the parent of a given process by sending file descriptors around via scm rights and not fearing that the given process will have been recycled in the meantime. It also allows for easy testing whether a given process is still alive or not by sending signal 0 to a pidfd which is quite handy. There has been some interest in this feature e.g. from systems management (systemd, glibc) and container managers. I have requested and gotten comments from glibc to make sure that this syscall is suitable for their needs as well. In the future I expect it to take on most other pid-based signal syscalls. But such features are left for the future once they are needed. This has been sitting in linux-next for quite a while and has not caused any issues. It comes with selftests which verify basic functionality and also test that a recycled pid cannot be signaled via a pidfd. Jon has written about a prior version of this patchset. It should cover the basic functionality since not a lot has changed since then: https://lwn.net/Articles/773459/ The commit message for the syscall itself is extensively documenting the syscall, including it's functionality and extensibility" * tag 'pidfd-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: selftests: add tests for pidfd_send_signal() signal: add pidfd_send_signal() syscall -
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull device-dax updates from Dan Williams: "New device-dax infrastructure to allow persistent memory and other "reserved" / performance differentiated memories, to be assigned to the core-mm as "System RAM". Some users want to use persistent memory as additional volatile memory. They are willing to cope with potential performance differences, for example between DRAM and 3D Xpoint, and want to use typical Linux memory management apis rather than a userspace memory allocator layered over an mmap() of a dax file. The administration model is to decide how much Persistent Memory (pmem) to use as System RAM, create a device-dax-mode namespace of that size, and then assign it to the core-mm. The rationale for device-dax is that it is a generic memory-mapping driver that can be layered over any "special purpose" memory, not just pmem. On subsequent boots udev rules can be used to restore the memory assignment. One implication of using pmem as RAM is that mlock() no longer keeps data off persistent media. For this reason it is recommended to enable NVDIMM Security (previously merged for 5.0) to encrypt pmem contents at rest. We considered making this recommendation an actively enforced requirement, but in the end decided to leave it as a distribution / administrator policy to allow for emulation and test environments that lack security capable NVDIMMs. Summary: - Replace the /sys/class/dax device model with /sys/bus/dax, and include a compat driver so distributions can opt-in to the new ABI. - Allow for an alternative driver for the device-dax address-range - Introduce the 'kmem' driver to hotplug / assign a device-dax address-range to the core-mm. - Arrange for the device-dax target-node to be onlined so that the newly added memory range can be uniquely referenced by numa apis" NOTE! I'm not entirely happy with the whole "PMEM as RAM" model because we currently have special - and very annoying rules in the kernel about accessing PMEM only with the "MC safe" accessors, because machine checks inside the regular repeat string copy functions can be fatal in some (not described) circumstances. And apparently the PMEM modules can cause that a lot more than regular RAM. The argument is that this happens because PMEM doesn't necessarily get scrubbed at boot like RAM does, but that is planned to be added for the user space tooling. Quoting Dan from another email: "The exposure can be reduced in the volatile-RAM case by scanning for and clearing errors before it is onlined as RAM. The userspace tooling for that can be in place before v5.1-final. There's also runtime notifications of errors via acpi_nfit_uc_error_notify() from background scrubbers on the DIMM devices. With that mechanism the kernel could proactively clear newly discovered poison in the volatile case, but that would be additional development more suitable for v5.2. I understand the concern, and the need to highlight this issue by tapping the brakes on feature development, but I don't see PMEM as RAM making the situation worse when the exposure is also there via DAX in the PMEM case. Volatile-RAM is arguably a safer use case since it's possible to repair pages where the persistent case needs active application coordination" * tag 'devdax-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: "Hotplug" persistent memory for use like normal RAM mm/resource: Let walk_system_ram_range() search child resources mm/memory-hotplug: Allow memory resources to be children mm/resource: Move HMM pr_debug() deeper into resource code mm/resource: Return real error codes from walk failures device-dax: Add a 'modalias' attribute to DAX 'bus' devices device-dax: Add a 'target_node' attribute device-dax: Auto-bind device after successful new_id acpi/nfit, device-dax: Identify differentiated memory with a unique numa-node device-dax: Add /sys/class/dax backwards compatibility device-dax: Add support for a dax override driver device-dax: Move resource pinning+mapping into the common driver device-dax: Introduce bus + driver model device-dax: Start defining a dax bus model device-dax: Remove multi-resource infrastructure device-dax: Kill dax_region base device-dax: Kill dax_region ida -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This is the final round of mostly small fixes and performance improvements to our initial submit. The main regression fix is the ia64 simscsi build failure which was missed in the serial number elimination conversion" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: ia64: simscsi: use request tag instead of serial_number scsi: aacraid: Fix performance issue on logical drives scsi: lpfc: Fix error codes in lpfc_sli4_pci_mem_setup() scsi: libiscsi: Hold back_lock when calling iscsi_complete_task scsi: hisi_sas: Change SERDES_CFG init value to increase reliability of HiLink scsi: hisi_sas: Send HARD RESET to clear the previous affiliation of STP target port scsi: hisi_sas: Set PHY linkrate when disconnected scsi: hisi_sas: print PHY RX errors count for later revision of v3 hw scsi: hisi_sas: Fix a timeout race of driver internal and SMP IO scsi: hisi_sas: Change return variable type in phy_up_v3_hw() scsi: qla2xxx: check for kstrtol() failure scsi: lpfc: fix 32-bit format string warning scsi: lpfc: fix unused variable warning scsi: target: tcmu: Switch to bitmap_zalloc() scsi: libiscsi: fall back to sendmsg for slab pages scsi: qla2xxx: avoid printf format warning scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unset scsi: lpfc: Correct __lpfc_sli_issue_iocb_s4 lockdep check scsi: ufs: hisi: fix ufs_hba_variant_ops passing scsi: qla2xxx: Fix panic in qla_dfs_tgt_counters_show ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull more block layer changes from Jens Axboe: "This is a collection of both stragglers, and fixes that came in after I finalized the initial pull. This contains: - An MD pull request from Song, with a few minor fixes - Set of NVMe patches via Christoph - Pull request from Konrad, with a few fixes for xen/blkback - pblk fix IO calculation fix (Javier) - Segment calculation fix for pass-through (Ming) - Fallthrough annotation for blkcg (Mathieu)" * tag 'for-5.1/block-post-20190315' of git://git.kernel.dk/linux-block: (25 commits) blkcg: annotate implicit fall through nvme-tcp: support C2HData with SUCCESS flag nvmet: ignore EOPNOTSUPP for discard nvme: add proper write zeroes setup for the multipath device nvme: add proper discard setup for the multipath device nvme: remove nvme_ns_config_oncs nvme: disable Write Zeroes for qemu controllers nvmet-fc: bring Disconnect into compliance with FC-NVME spec nvmet-fc: fix issues with targetport assoc_list list walking nvme-fc: reject reconnect if io queue count is reduced to zero nvme-fc: fix numa_node when dev is null nvme-fc: use nr_phys_segments to determine existence of sgl nvme-loop: init nvmet_ctrl fatal_err_work when allocate nvme: update comment to make the code easier to read nvme: put ns_head ref if namespace fails allocation nvme-trace: fix cdw10 buffer overrun nvme: don't warn on block content change effects nvme: add get-feature to admin cmds tracer md: Fix failed allocation of md_register_thread It's wrong to add len to sector_nr in raid10 reshape twice ...
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Bugfixes: - Fix an Oops in SUNRPC back channel tracepoints - Fix a SUNRPC client regression when handling oversized replies - Fix the minimal size for SUNRPC reply buffer allocation - rpc_decode_header() must always return a non-zero value on error - Fix a typo in pnfs_update_layout() Cleanup: - Remove redundant check for the reply length in call_decode()" * tag 'nfs-for-5.1-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Remove redundant check for the reply length in call_decode() SUNRPC: Handle the SYSTEM_ERR rpc error SUNRPC: rpc_decode_header() must always return a non-zero value on error SUNRPC: Use the ENOTCONN error on socket disconnect SUNRPC: Fix the minimal size for reply buffer allocation SUNRPC: Fix a client regression when handling oversized replies pNFS: Fix a typo in pnfs_update_layout fix null pointer deref in tracepoints in back channel
-
