Pull x86 vdso update from Borislav Petkov:

 - Get rid of CONFIG_LEGACY_VSYSCALL_EMULATE as nothing should be using
   it anymore

* tag 'x86_vdso_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vsyscall: Remove CONFIG_LEGACY_VSYSCALL_EMULATE

Pull x86 microcode loader update from Borislav Petkov:

 - Make CPU vendor dependency explicit against random config build
   failures

* tag 'x86_microcode_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Add explicit CPU vendor dependency

Pull misc x86 updates from Borislav Petkov:
 "A variety of fixes which don't fit any other tip bucket:

   - Remove unnecessary function export

   - Correct asm constraint

   - Fix __setup handlers retval"

* tag 'x86_misc_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Cleanup the control_va_addr_alignment() __setup handler
  x86: Fix return value of __setup handlers
  x86/delay: Fix the wrong asm constraint in delay_loop()
  x86/amd_nb: Unexport amd_cache_northbridges()

Pull x86 splitlock updates from Borislav Petkov:

 - Add Raptor Lake to the set of CPU models which support splitlock

 - Make life miserable for apps using split locks by slowing them down
   considerably while the rest of the system remains responsive. The
   hope is it will hurt more and people will really fix their misaligned
   locks apps. As a result, free a TIF bit.

* tag 'x86_splitlock_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/split_lock: Enable the split lock feature on Raptor Lake
  x86/split-lock: Remove unused TIF_SLD bit
  x86/split_lock: Make life miserable for split lockers

Pull x86 APIC updates from Borislav Petkov:

 - Always do default APIC routing setup so that cpumasks are properly
   allocated and are present when later accessed ("nosmp" and x2APIC)

 - Clarify the bit overlap between an old APIC and a modern, integrated
   one

* tag 'x86_apic_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Do apic driver probe for "nosmp" use case
  x86/apic: Clarify i82489DX bit overlap in APIC_LVT0

Pull x86 kdump fixlet from Borislav Petkov:

 - A single debug message fix

* tag 'x86_kdump_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/crash: Fix minor typo/bug in debug message

Pull x86 platform updates from Borislav Petkov:

 - A couple of changes enabling SGI UV5 support

* tag 'x86_platform_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/uv: Log gap hole end size
  x86/platform/uv: Update TSC sync state for UV5
  x86/platform/uv: Update NMI Handler for UV5

Pull x86 mm fixlet from Borislav Petkov:

 - A sparse address space annotation fix

* tag 'x86_mm_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fault: Cast an argument to the proper address space in prefetch()

Pull x86 fpu updates from Borislav Petkov:

 - Add support for XSAVEC - the Compacted XSTATE saving variant - and
   thus allow for guests to use this compacted XSTATE variant when the
   hypervisor exports that support

 - A variable shadowing cleanup

* tag 'x86_fpu_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Cleanup variable shadowing
  x86/fpu/xsave: Support XSAVEC in the kernel

Pull core x86 updates from Borislav Petkov:

 - Remove all the code around GS switching on 32-bit now that it is not
   needed anymore

 - Other misc improvements

* tag 'x86_core_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  bug: Use normal relative pointers in 'struct bug_entry'
  x86/nmi: Make register_nmi_handler() more robust
  x86/asm: Merge load_gs_index()
  x86/32: Remove lazy GS macros
  ELF: Remove elf_core_copy_kernel_regs()
  x86/32: Simplify ELF_CORE_COPY_REGS

Pull x86 cleanups from Borislav Petkov:

 - Serious sanitization and cleanup of the whole APERF/MPERF and
   frequency invariance code along with removing the need for
   unnecessary IPIs

 - Finally remove a.out support

 - The usual trivial cleanups and fixes all over x86

* tag 'x86_cleanups_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  x86: Remove empty files
  x86/speculation: Add missing srbds=off to the mitigations= help text
  x86/prctl: Remove pointless task argument
  x86/aperfperf: Make it correct on 32bit and UP kernels
  x86/aperfmperf: Integrate the fallback code from show_cpuinfo()
  x86/aperfmperf: Replace arch_freq_get_on_cpu()
  x86/aperfmperf: Replace aperfmperf_get_khz()
  x86/aperfmperf: Store aperf/mperf data for cpu frequency reads
  x86/aperfmperf: Make parts of the frequency invariance code unconditional
  x86/aperfmperf: Restructure arch_scale_freq_tick()
  x86/aperfmperf: Put frequency invariance aperf/mperf data into a struct
  x86/aperfmperf: Untangle Intel and AMD frequency invariance init
  x86/aperfmperf: Separate AP/BP frequency invariance init
  x86/smp: Move APERF/MPERF code where it belongs
  x86/aperfmperf: Dont wake idle CPUs in arch_freq_get_on_cpu()
  x86/process: Fix kernel-doc warning due to a changed function name
  x86: Remove a.out support
  x86/mm: Replace nodes_weight() with nodes_empty() where appropriate
  x86: Replace cpumask_weight() with cpumask_empty() where appropriate
  x86/pkeys: Remove __arch_set_user_pkey_access() declaration
  ...

Pull x86 build updates from Borislav Petkov:

 - Add a "make x86_debug.config" target which enables a bunch of useful
   config debug options when trying to debug an issue

 - A gcc-12 build warnings fix

* tag 'x86_build_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Wrap literal addresses in absolute_pointer()
  x86/configs: Add x86 debugging Kconfig fragment plus docs

Pull x86 asm updates from Borislav Petkov:

 - A bunch of changes towards streamlining low level asm helpers'
   calling conventions so that former can be converted to C eventually

 - Simplify PUSH_AND_CLEAR_REGS so that it can be used at the system
   call entry paths instead of having opencoded, slightly different
   variants of it everywhere

 - Misc other fixes

* tag 'x86_asm_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry: Fix register corruption in compat syscall
  objtool: Fix STACK_FRAME_NON_STANDARD reloc type
  linkage: Fix issue with missing symbol size
  x86/entry: Remove skip_r11rcx
  x86/entry: Use PUSH_AND_CLEAR_REGS for compat
  x86/entry: Simplify entry_INT80_compat()
  x86/mm: Simplify RESERVE_BRK()
  x86/entry: Convert SWAPGS to swapgs and remove the definition of SWAPGS
  x86/entry: Don't call error_entry() for XENPV
  x86/entry: Move CLD to the start of the idtentry macro
  x86/entry: Move PUSH_AND_CLEAR_REGS out of error_entry()
  x86/entry: Switch the stack after error_entry() returns
  x86/traps: Use pt_regs directly in fixup_bad_iret()

Pull x86 CPU feature updates from Borislav Petkov:

 - Remove a bunch of chicken bit options to turn off CPU features which
   are not really needed anymore

 - Misc fixes and cleanups

* tag 'x86_cpu_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation: Add missing prototype for unpriv_ebpf_notify()
  x86/pm: Fix false positive kmemleak report in msr_build_context()
  x86/speculation/srbds: Do not try to turn mitigation off when not supported
  x86/cpu: Remove "noclflush"
  x86/cpu: Remove "noexec"
  x86/cpu: Remove "nosmep"
  x86/cpu: Remove CONFIG_X86_SMAP and "nosmap"
  x86/cpu: Remove "nosep"
  x86/cpu: Allow feature bit names from /proc/cpuinfo in clearcpuid=

Pull Intel TDX support from Borislav Petkov:
 "Intel Trust Domain Extensions (TDX) support.

  This is the Intel version of a confidential computing solution called
  Trust Domain Extensions (TDX). This series adds support to run the
  kernel as part of a TDX guest. It provides similar guest protections
  to AMD's SEV-SNP like guest memory and register state encryption,
  memory integrity protection and a lot more.

  Design-wise, it differs from AMD's solution considerably: it uses a
  software module which runs in a special CPU mode called (Secure
  Arbitration Mode) SEAM. As the name suggests, this module serves as
  sort of an arbiter which the confidential guest calls for services it
  needs during its lifetime.

  Just like AMD's SNP set, this series reworks and streamlines certain
  parts of x86 arch code so that this feature can be properly
  accomodated"

* tag 'x86_tdx_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  x86/tdx: Fix RETs in TDX asm
  x86/tdx: Annotate a noreturn function
  x86/mm: Fix spacing within memory encryption features message
  x86/kaslr: Fix build warning in KASLR code in boot stub
  Documentation/x86: Document TDX kernel architecture
  ACPICA: Avoid cache flush inside virtual machines
  x86/tdx/ioapic: Add shared bit for IOAPIC base address
  x86/mm: Make DMA memory shared for TD guest
  x86/mm/cpa: Add support for TDX shared memory
  x86/tdx: Make pages shared in ioremap()
  x86/topology: Disable CPU online/offline control for TDX guests
  x86/boot: Avoid #VE during boot for TDX platforms
  x86/boot: Set CR0.NE early and keep it set during the boot
  x86/acpi/x86/boot: Add multiprocessor wake-up support
  x86/boot: Add a trampoline for booting APs via firmware handoff
  x86/tdx: Wire up KVM hypercalls
  x86/tdx: Port I/O: Add early boot support
  x86/tdx: Port I/O: Add runtime hypercalls
  x86/boot: Port I/O: Add decompression-time support for TDX
  x86/boot: Port I/O: Allow to hook up alternative helpers
  ...

Pull x86 RAS updates from Borislav Petkov:

 - Simplification of the AMD MCE error severity grading logic along with
   supplying critical panic MCEs with accompanying error messages for
   more human-friendly diagnostics.

 - Misc fixes

* tag 'ras_core_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Add messages for panic errors in AMD's MCE grading
  x86/mce: Simplify AMD severity grading logic
  x86/MCE/AMD: Fix memory leak when threshold_create_bank() fails
  x86/mce: Avoid unnecessary padding in struct mce_bank

Pull AMD SEV-SNP support from Borislav Petkov:
 "The third AMD confidential computing feature called Secure Nested
  Paging.

  Add to confidential guests the necessary memory integrity protection
  against malicious hypervisor-based attacks like data replay, memory
  remapping and others, thus achieving a stronger isolation from the
  hypervisor.

  At the core of the functionality is a new structure called a reverse
  map table (RMP) with which the guest has a say in which pages get
  assigned to it and gets notified when a page which it owns, gets
  accessed/modified under the covers so that the guest can take an
  appropriate action.

  In addition, add support for the whole machinery needed to launch a
  SNP guest, details of which is properly explained in each patch.

  And last but not least, the series refactors and improves parts of the
  previous SEV support so that the new code is accomodated properly and
  not just bolted on"

* tag 'x86_sev_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
  x86/entry: Fixup objtool/ibt validation
  x86/sev: Mark the code returning to user space as syscall gap
  x86/sev: Annotate stack change in the #VC handler
  x86/sev: Remove duplicated assignment to variable info
  x86/sev: Fix address space sparse warning
  x86/sev: Get the AP jump table address from secrets page
  x86/sev: Add missing __init annotations to SEV init routines
  virt: sevguest: Rename the sevguest dir and files to sev-guest
  virt: sevguest: Change driver name to reflect generic SEV support
  x86/boot: Put globals that are accessed early into the .data section
  x86/boot: Add an efi.h header for the decompressor
  virt: sevguest: Fix bool function returning negative value
  virt: sevguest: Fix return value check in alloc_shared_pages()
  x86/sev-es: Replace open-coded hlt-loop with sev_es_terminate()
  virt: sevguest: Add documentation for SEV-SNP CPUID Enforcement
  virt: sevguest: Add support to get extended report
  virt: sevguest: Add support to derive key
  virt: Add SEV-SNP guest driver
  x86/sev: Register SEV-SNP guest request platform device
  x86/sev: Provide support for SNP guest request NAEs
  ...

Pull EDAC updates from Borislav Petkov:

 - Switch ghes_edac to use the CPER error reporting routines and
   simplify the code considerably this way

 - Rip out the silly edac_align_ptr() contraption which was computing
   the size of the private structures of each driver and thus allowing
   for a one-shot memory allocation. This was clearly unnecessary and
   confusing so switch to simple and boring kmalloc* calls.

 - Last but not least, the usual garden variety of fixes, cleanups and
   improvements all over EDAC land

* tag 'edac_updates_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/xgene: Fix typo processsors -> processors
  EDAC/i5100: Remove unused inline function i5100_nrecmema_dm_buf_id()
  EDAC: Use kcalloc()
  EDAC/ghes: Change ghes_hw from global to static
  EDAC/armada_xp: Use devm_platform_ioremap_resource()
  EDAC/synopsys: Add a SPDX identifier
  EDAC/synopsys: Add driver support for i.MX platforms
  EDAC/dmc520: Don't print an error for each unconfigured interrupt line
  EDAC/mc: Get rid of edac_align_ptr()
  EDAC/device: Sanitize edac_device_alloc_ctl_info() definition
  EDAC/device: Get rid of the silly one-shot memory allocation in edac_device_alloc_ctl_info()
  EDAC/pci: Get rid of the silly one-shot memory allocation in edac_pci_alloc_ctl_info()
  EDAC/mc: Get rid of silly one-shot struct allocation in edac_mc_alloc()
  efi/cper: Reformat CPER memory error location to more readable
  EDAC/ghes: Unify CPER memory error location reporting
  efi/cper: Add a cper_mem_err_status_str() to decode error description
  powerpc/85xx: Remove fsl,85... bindings

Pull x86 PCI irq routing updates from Thomas Gleixner:

 - Cleanup and robustify the PCI interrupt routing table handling
   including proper range checks

 - Add support for Intel 82378ZB/82379AB, SiS85C497 PIRQ routers

 - Fix the ALi M1487 router handling

 - Handle the IRT routing table format in AMI BIOSes correctly

* tag 'x86-irq-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/PCI: Fix coding style in PIRQ table verification
  x86/PCI: Fix ALi M1487 (IBC) PIRQ router link value interpretation
  x86/PCI: Add $IRT PIRQ routing table support
  x86/PCI: Handle PIRQ routing tables with no router device given
  x86/PCI: Add PIRQ routing table range checks
  x86/PCI: Add support for the SiS85C497 PIRQ router
  x86/PCI: Disambiguate SiS85C503 PIRQ router code entities
  x86/PCI: Handle IRQ swizzling with PIRQ routers
  x86/PCI: Also match function number in $PIR table
  x86/PCI: Include function number in $PIR table dump
  x86/PCI: Show the physical address of the $PIR table

Pull timer and timekeeping updates from Thomas Gleixner:

 - Expose CLOCK_TAI to instrumentation to aid with TSN debugging.

 - Ensure that the clockevent is stopped when there is no timer armed to
   avoid pointless wakeups.

 - Make the sched clock frequency handling and rounding consistent.

 - Provide a better debugobject hint for delayed works. The timer
   callback is always the same, which makes it difficult to identify the
   underlying work. Use the work function as a hint instead.

 - Move the timer specific sysctl code into the timer subsystem.

 - The usual set of improvements and cleanups

* tag 'timers-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers: Provide a better debugobjects hint for delayed works
  time/sched_clock: Fix formatting of frequency reporting code
  time/sched_clock: Use Hz as the unit for clock rate reporting below 4kHz
  time/sched_clock: Round the frequency reported to nearest rather than down
  timekeeping: Consolidate fast timekeeper
  timekeeping: Annotate ktime_get_boot_fast_ns() with data_race()
  timers/nohz: Switch to ONESHOT_STOPPED in the low-res handler when the tick is stopped
  timekeeping: Introduce fast accessor to clock tai
  tracing/timer: Add missing argument documentation of trace points
  clocksource: Replace cpumask_weight() with cpumask_empty()
  timers: Move timer sysctl into the timer code
  clockevents: Use dedicated list iterator variable
  timers: Simplify calc_index()
  timers: Initialize base::next_expiry_recalc in timers_prepare_cpu()

Pull interrupt handling updates from Thomas Gleixner:
 "Core code:

   - Make the managed interrupts more robust by shutting them down in
     the core code when the assigned affinity mask does not contain
     online CPUs.

   - Make the irq simulator chip work on RT

   - A small set of cpumask and power manageent cleanups

  Drivers:

   - A set of changes which mark GPIO interrupt chips immutable to
     prevent the GPIO subsystem from modifying it under the hood. This
     provides the necessary infrastructure and converts a set of GPIO
     and pinctrl drivers over.

   - A set of changes to make the pseudo-NMI handling for GICv3 more
     robust: a missing barrier and consistent handling of the priority
     mask.

   - Another set of GICv3 improvements and fixes, but nothing
     outstanding

   - The usual set of improvements and cleanups all over the place

   - No new irqchip drivers and not even a new device tree binding!
     100+ interrupt chips are truly enough"

* tag 'irq-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  irqchip: Add Kconfig symbols for sunxi drivers
  irqchip/gic-v3: Fix priority mask handling
  irqchip/gic-v3: Refactor ISB + EOIR at ack time
  irqchip/gic-v3: Ensure pseudo-NMIs have an ISB between ack and handling
  genirq/irq_sim: Make the irq_work always run in hard irq context
  irqchip/armada-370-xp: Do not touch Performance Counter Overflow on A375, A38x, A39x
  irqchip/gic: Improved warning about incorrect type
  irqchip/csky: Return true/false (not 1/0) from bool functions
  irqchip/imx-irqsteer: Add runtime PM support
  irqchip/imx-irqsteer: Constify irq_chip struct
  irqchip/armada-370-xp: Enable MSI affinity configuration
  irqchip/aspeed-scu-ic: Fix irq_of_parse_and_map() return value
  irqchip/aspeed-i2c-ic: Fix irq_of_parse_and_map() return value
  irqchip/sun6i-r: Use NULL for chip_data
  irqchip/xtensa-mx: Fix initial IRQ affinity in non-SMP setup
  irqchip/exiu: Fix acknowledgment of edge triggered interrupts
  irqchip/gic-v3: Claim iomem resources
  dt-bindings: interrupt-controller: arm,gic-v3: Make the v2 compat requirements explicit
  irqchip/gic-v3: Relax polling of GIC{R,D}_CTLR.RWP
  irqchip/gic-v3: Detect LPI invalidation MMIO registers
  ...

Pull CPU hotplug updates from Thomas Gleixner:

 - Initialize the per-CPU structures during early boot so that the state
   is consistent from the very beginning.

 - Make the virtualization hotplug state handling more robust and let
   the core bringup CPUs which timed out in an earlier attempt again.

 - Make the x86/xen CPU state tracking consistent on a failed online
   attempt, so a consecutive bringup does not fall over the inconsistent
   state.

* tag 'smp-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Initialise all cpuhp_cpu_state structs earlier
  cpu/hotplug: Allow the CPU in CPU_UP_PREPARE state to be brought up again.
  x86/xen: Allow to retry if cpu_initialize_context() failed.

Pull debugobjects fixlet from Thomas Gleixner:
 "Trivial licensing cleanup in debugobjects"

* tag 'core-debugobjects-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Convert to SPDX license identifier

Pull irqpoll update from Thomas Gleixner:
 "A single update for irqpoll:

  Ensure that a raised soft interrupt is handled after pulling the
  blk_cpu_iopoll backlog from a unplugged CPU. This prevents that the
  CPU which runs that code reaches idle with soft interrupts pending"

* tag 'core-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lib/irq_poll: Prevent softirq pending leak in irq_poll_cpu_dead()

Pull zonefs updates from Damien Le Moal:
 "This improves zonefs open sequential file accounting and adds
  accounting for active sequential files to allow the user to handle the
  maximum number of active zones of an NVMe ZNS drive.

  sysfs attributes for both open and active sequential files are also
  added to facilitate access to this information from applications
  without resorting to inspecting the block device limits"

* tag 'zonefs-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  documentation: zonefs: Document sysfs attributes
  documentation: zonefs: Cleanup the mount options section
  zonefs: Add active seq file accounting
  zonefs: Export open zone resource information through sysfs
  zonefs: Always do seq file write open accounting
  zonefs: Rename super block information fields
  zonefs: Fix management of open zones
  zonefs: Clear inode information flags on inode creation

Pull ata updates from Damien Le Moal:
 "For this cycle, the libata.force kernel parameter changes stand out.
  Beside that, some small cleanups in various drivers. In more detail:

   - Changes to the pata_mpc52xx driver in preparation for powerpc's
     asm/prom.h cleanup, from Christophe.

   - Improved ATA command allocation, from John.

   - Various small cleanups to the pata_via, pata_sil680, pata_ftide010,
     sata_gemini, ahci_brcm drivers and to libata-core, from Sergey,
     Diego, Ruyi, Mighao and Jiabing.

   - Add support for the RZ/G2H SoC to the rcar-sata driver, from Lad.

   - AHCI RAID ID cleanup, from Dan.

   - Improvement to the libata.force kernel parameter to allow most
     horkage flags to be manually forced for debugging drive issues in
     the field without needing recompiling a kernel, from me"

* tag 'ata-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: pata_ftide010: Remove unneeded ERROR check before clk_disable_unprepare
  doc: admin-guide: Update libata kernel parameters
  ata: libata-core: Allow forcing most horkage flags
  ata: libata-core: Improve link flags forced settings
  ata: libata-core: Refactor force_tbl definition
  ata: libata-core: cleanup ata_device_blacklist
  ata: simplify the return expression of brcm_ahci_remove
  ata: Make use of the helper function devm_platform_ioremap_resource()
  ata: libata-core: replace "its" with "it is"
  ahci: Add a generic 'controller2' RAID id
  dt-bindings: ata: renesas,rcar-sata: Add r8a774e1 support
  ata: pata_via: fix sloppy typing in via_do_set_mode()
  ata: pata_sil680: fix result type of sil680_sel{dev|reg}()
  ata: libata-core: fix parameter type in ata_xfer_mode2shift()
  libata: Improve ATA queued command allocation
  ata: pata_mpc52xx: Prepare cleanup of powerpc's asm/prom.h

Pull block driver updates from Jens Axboe:
 "Here are the driver updates queued up for 5.19. This contains:

   - NVMe pull requests via Christoph:
       - tighten the PCI presence check (Stefan Roese)
       - fix a potential NULL pointer dereference in an error path (Kyle
         Miller Smith)
       - fix interpretation of the DMRSL field (Tom Yan)
       - relax the data transfer alignment (Keith Busch)
       - verbose error logging improvements (Max Gurtovoy, Chaitanya
         Kulkarni)
       - misc cleanups (Chaitanya Kulkarni, Christoph)
       - set non-mdts limits in nvme_scan_work (Chaitanya Kulkarni)
       - add support for TP4084 - Time-to-Ready Enhancements (Christoph)

   - MD pull request via Song:
       - Improve annotation in raid5 code, by Logan Gunthorpe
       - Support MD_BROKEN flag in raid-1/5/10, by Mariusz Tkaczyk
       - Other small fixes/cleanups

   - null_blk series making the configfs side much saner (Damien)

   - Various minor drbd cleanups and fixes (Haowen, Uladzislau, Jiapeng,
     Arnd, Cai)

   - Avoid using the system workqueue (and hence flushing it) in rnbd
     (Jack)

   - Avoid using the system workqueue (and hence flushing it) in aoe
     (Tetsuo)

   - Series fixing discard_alignment issues in drivers (Christoph)

   - Small series fixing drivers poking at disk->part0 for openers
     information (Christoph)

   - Series fixing deadlocks in loop (Christoph, Tetsuo)

   - Remove loop.h and add SPDX headers (Christoph)

   - Various fixes and cleanups (Julia, Xie, Yu)"

* tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block: (72 commits)
  mtip32xx: fix typo in comment
  nvme: set non-mdts limits in nvme_scan_work
  nvme: add support for TP4084 - Time-to-Ready Enhancements
  nvme: split the enum used for various register constants
  nbd: Fix hung on disconnect request if socket is closed before
  nvme-fabrics: add a request timeout helper
  nvme-pci: harden drive presence detect in nvme_dev_disable()
  nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags
  nvme: mark internal passthru request RQF_QUIET
  nvme: remove unneeded include from constants file
  nvme: add missing status values to verbose logging
  nvme: set dma alignment to dword
  nvme: fix interpretation of DMRSL
  loop: remove most the top-of-file boilerplate comment from the UAPI header
  loop: remove most the top-of-file boilerplate comment
  loop: add a SPDX header
  loop: remove loop.h
  block: null_blk: Improve device creation with configfs
  block: null_blk: Cleanup messages
  block: null_blk: Cleanup device creation and deletion
  ...

Pull block updates from Jens Axboe:
 "Here are the core block changes for 5.19. This contains:

   - blk-throttle accounting fix (Laibin)

   - Series removing redundant assignments (Michal)

   - Expose bio cache via the bio_set, so that DM can use it (Mike)

   - Finish off the bio allocation interface cleanups by dealing with
     the weirdest member of the family. bio_kmalloc combines a kmalloc
     for the bio and bio_vecs with a hidden bio_init call and magic
     cleanup semantics (Christoph)

   - Clean up the block layer API so that APIs consumed by file systems
     are (almost) only struct block_device based, so that file systems
     don't have to poke into block layer internals like the
     request_queue (Christoph)

   - Clean up the blk_execute_rq* API (Christoph)

   - Clean up various lose end in the blk-cgroup code to make it easier
     to follow in preparation of reworking the blkcg assignment for bios
     (Christoph)

   - Fix use-after-free issues in BFQ when processes with merged queues
     get moved to different cgroups (Jan)

   - BFQ fixes (Jan)

   - Various fixes and cleanups (Bart, Chengming, Fanjun, Julia, Ming,
     Wolfgang, me)"

* tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block: (83 commits)
  blk-mq: fix typo in comment
  bfq: Remove bfq_requeue_request_body()
  bfq: Remove superfluous conversion from RQ_BIC()
  bfq: Allow current waker to defend against a tentative one
  bfq: Relax waker detection for shared queues
  blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE()
  blk-throttle: Set BIO_THROTTLED when bio has been throttled
  blk-cgroup: Remove unnecessary rcu_read_lock/unlock()
  blk-cgroup: always terminate io.stat lines
  block, bfq: make bfq_has_work() more accurate
  block, bfq: protect 'bfqd->queued' by 'bfqd->lock'
  block: cleanup the VM accounting in submit_bio
  block: Fix the bio.bi_opf comment
  block: reorder the REQ_ flags
  blk-iocost: combine local_stat and desc_stat to stat
  block: improve the error message from bio_check_eod
  block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone
  block: remove superfluous calls to blkcg_bio_issue_init
  kthread: unexport kthread_blkcg
  blk-cgroup: cleanup blkcg_maybe_throttle_current
  ...

Pull cdrom updates from Jens Axboe:
 "Removal of unused code and documentation updates"

* tag 'for-5.19/cdrom-2022-05-22' of git://git.kernel.dk/linux-block:
  cdrom: remove obsolete TODO list
  block: remove last remaining traces of IDE documentation
  cdrom: mark CDROMGETSPINDOWN/CDROMSETSPINDOWN obsolete
  cdrom: remove the unused driver specific disc change ioctl
  cdrom: make EXPORT_SYMBOL follow exported function

Pull writeback fix from Jens Axboe:
 "A single writeback fix that didn't belong in any other branch,
  correcting the number of skipped pages"

* tag 'for-5.19/writeback-2022-05-22' of git://git.kernel.dk/linux-block:
  fs-writeback: writeback_sb_inodes：Recalculate 'wrote' according skipped pages

Pull io_uring NVMe command passthrough from Jens Axboe:
 "On top of everything else, this adds support for passthrough for
  io_uring.

  The initial feature for this is NVMe passthrough support, which allows
  non-filesystem based IO commands and admin commands.

  To support this, io_uring grows support for SQE and CQE members that
  are twice as big, allowing to pass in a full NVMe command without
  having to copy data around. And to complete with more than just a
  single 32-bit value as the output"

* tag 'for-5.19/io_uring-passthrough-2022-05-22' of git://git.kernel.dk/linux-block: (22 commits)
  io_uring: cleanup handling of the two task_work lists
  nvme: enable uring-passthrough for admin commands
  nvme: helper for uring-passthrough checks
  blk-mq: fix passthrough plugging
  nvme: add vectored-io support for uring-cmd
  nvme: wire-up uring-cmd support for io-passthru on char-device.
  nvme: refactor nvme_submit_user_cmd()
  block: wire-up support for passthrough plugging
  fs,io_uring: add infrastructure for uring-cmd
  io_uring: support CQE32 for nop operation
  io_uring: enable CQE32
  io_uring: support CQE32 in /proc info
  io_uring: add tracing for additional CQE32 fields
  io_uring: overflow processing for CQE32
  io_uring: flush completions for CQE32
  io_uring: modify io_get_cqe for CQE32
  io_uring: add CQE32 completion processing
  io_uring: add CQE32 setup processing
  io_uring: change ring size calculation for CQE32
  io_uring: store add. return values for CQE32
  ...

Pull io_uring 'more data in socket' support from Jens Axboe:
 "To be able to fully utilize the 'poll first' support in the core
  io_uring branch, it's advantageous knowing if the socket was empty
  after a receive. This adds support for that"

* tag 'for-5.19/io_uring-net-2022-05-22' of git://git.kernel.dk/linux-block:
  io_uring: return hint on whether more data is available after receive
  tcp: pass back data left in socket after receive

Pull io_uring socket() support from Jens Axboe:
 "This adds support for socket(2) for io_uring. This is handy when using
  direct / registered file descriptors with io_uring.

  Outside of those two patches, a small series from Dylan on top that
  improves the tracing by providing a text representation of the opcode
  rather than needing to decode this by reading the header file every
  time.

  That sits in this branch as it was the last opcode added (until it
  wasn't...)"

* tag 'for-5.19/io_uring-socket-2022-05-22' of git://git.kernel.dk/linux-block:
  io_uring: use the text representation of ops in trace
  io_uring: rename op -> opcode
  io_uring: add io_uring_get_opcode
  io_uring: add type to op enum
  io_uring: add socket(2) support
  net: add __sys_socket_file()

Pull io_uring xattr support from Jens Axboe:
 "Support for the xattr variants"

* tag 'for-5.19/io_uring-xattr-2022-05-22' of git://git.kernel.dk/linux-block:
  io_uring: cleanup error-handling around io_req_complete
  io_uring: fix trace for reduced sqe padding
  io_uring: add fgetxattr and getxattr support
  io_uring: add fsetxattr and setxattr support
  fs: split off do_getxattr from getxattr
  fs: split off setxattr_copy and do_setxattr function from setxattr

Pull io_uring updates from Jens Axboe:
 "Here are the main io_uring changes for 5.19. This contains:

   - Fixes for sparse type warnings (Christoph, Vasily)

   - Support for multi-shot accept (Hao)

   - Support for io_uring managed fixed files, rather than always
     needing the applicationt o manage the indices (me)

   - Fix for a spurious poll wakeup (Dylan)

   - CQE overflow fixes (Dylan)

   - Support more types of cancelations (me)

   - Support for co-operative task_work signaling, rather than always
     forcing an IPI (me)

   - Support for doing poll first when appropriate, rather than always
     attempting a transfer first (me)

   - Provided buffer cleanups and support for mapped buffers (me)

   - Improve how io_uring handles inflight SCM files (Pavel)

   - Speedups for registered files (Pavel, me)

   - Organize the completion data in a struct in io_kiocb rather than
     keep it in separate spots (Pavel)

   - task_work improvements (Pavel)

   - Cleanup and optimize the submission path, in general and for
     handling links (Pavel)

   - Speedups for registered resource handling (Pavel)

   - Support sparse buffers and file maps (Pavel, me)

   - Various fixes and cleanups (Almog, Pavel, me)"

* tag 'for-5.19/io_uring-2022-05-22' of git://git.kernel.dk/linux-block: (111 commits)
  io_uring: fix incorrect __kernel_rwf_t cast
  io_uring: disallow mixed provided buffer group registrations
  io_uring: initialize io_buffer_list head when shared ring is unregistered
  io_uring: add fully sparse buffer registration
  io_uring: use rcu_dereference in io_close
  io_uring: consistently use the EPOLL* defines
  io_uring: make apoll_events a __poll_t
  io_uring: drop a spurious inline on a forward declaration
  io_uring: don't use ERR_PTR for user pointers
  io_uring: use a rwf_t for io_rw.flags
  io_uring: add support for ring mapped supplied buffers
  io_uring: add io_pin_pages() helper
  io_uring: add buffer selection support to IORING_OP_NOP
  io_uring: fix locking state for empty buffer group
  io_uring: implement multishot mode for accept
  io_uring: let fast poll support multishot
  io_uring: add REQ_F_APOLL_MULTISHOT for requests
  io_uring: add IORING_ACCEPT_MULTISHOT for accept
  io_uring: only wake when the correct events are set
  io_uring: avoid io-wq -EAGAIN looping for !IOPOLL
  ...

Pull RCU update from Paul McKenney:

 - Documentation updates

 - Miscellaneous fixes

 - Callback-offloading updates, mainly simplifications

 - RCU-tasks updates, including some -rt fixups, handling of systems
   with sparse CPU numbering, and a fix for a boot-time race-condition
   failure

 - Put SRCU on a memory diet in order to reduce the size of the
   srcu_struct structure

 - Torture-test updates fixing some bugs in tests and closing some
   testing holes

 - Torture-test updates for the RCU tasks flavors, most notably ensuring
   that building rcutorture and friends does not change the
   RCU-tasks-related Kconfig options

 - Torture-test scripting updates

 - Expedited grace-period updates, most notably providing
   milliseconds-scale (not all that) soft real-time response from
   synchronize_rcu_expedited().

   This is also the first time in almost 30 years of RCU that someone
   other than me has pushed for a reduction in the RCU CPU stall-warning
   timeout, in this case by more than three orders of magnitude from 21
   seconds to 20 milliseconds. This tighter timeout applies only to
   expedited grace periods

* tag 'rcu.2022.05.19a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (80 commits)
  rcu: Move expedited grace period (GP) work to RT kthread_worker
  rcu: Introduce CONFIG_RCU_EXP_CPU_STALL_TIMEOUT
  srcu: Drop needless initialization of sdp in srcu_gp_start()
  srcu: Prevent expedited GPs and blocking readers from consuming CPU
  srcu: Add contention check to call_srcu() srcu_data ->lock acquisition
  srcu: Automatically determine size-transition strategy at boot
  rcutorture: Make torture.sh allow for --kasan
  rcutorture: Make torture.sh refscale and rcuscale specify Tasks Trace RCU
  rcutorture: Make kvm.sh allow more memory for --kasan runs
  torture: Save "make allmodconfig" .config file
  scftorture: Remove extraneous "scf" from per_version_boot_params
  rcutorture: Adjust scenarios' Kconfig options for CONFIG_PREEMPT_DYNAMIC
  torture: Enable CSD-lock stall reports for scftorture
  torture: Skip vmlinux check for kvm-again.sh runs
  scftorture: Adjust for TASKS_RCU Kconfig option being selected
  rcuscale: Allow rcuscale without RCU Tasks Rude/Trace
  rcuscale: Allow rcuscale without RCU Tasks
  refscale: Allow refscale without RCU Tasks Rude/Trace
  refscale: Allow refscale without RCU Tasks
  rcutorture: Allow specifying per-scenario stat_interval
  ...

Pull LKMM update from Paul McKenney:
 "This updates the klitmus7 compatibility table to indicate that
  herdtools7 7.56.1 or better is required for Linux kernel v5.17 or
  later"

* tag 'lkmm.2022.05.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  tools/memory-model/README: Update klitmus7 compat table

Pull nolibc library updates from Paul McKenney:
 "This adds a number of library functions and splits this library into
  multiple files"

* tag 'nolibc.2022.05.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (61 commits)
  tools/nolibc/string: Implement `strdup()` and `strndup()`
  tools/nolibc/string: Implement `strnlen()`
  tools/nolibc/stdlib: Implement `malloc()`, `calloc()`, `realloc()` and `free()`
  tools/nolibc/types: Implement `offsetof()` and `container_of()` macro
  tools/nolibc/sys: Implement `mmap()` and `munmap()`
  tools/nolibc: i386: Implement syscall with 6 arguments
  tools/nolibc: Remove .global _start from the entry point code
  tools/nolibc: Replace `asm` with `__asm__`
  tools/nolibc: x86-64: Update System V ABI document link
  tools/nolibc/stdlib: only reference the external environ when inlined
  tools/nolibc/string: do not use __builtin_strlen() at -O0
  tools/nolibc: add the nolibc subdir to the common Makefile
  tools/nolibc: add a makefile to install headers
  tools/nolibc/types: add poll() and waitpid() flag definitions
  tools/nolibc/sys: add syscall definition for getppid()
  tools/nolibc/string: add strcmp() and strncmp()
  tools/nolibc/stdio: add support for '%p' to vfprintf()
  tools/nolibc/stdlib: add a simple getenv() implementation
  tools/nolibc/stdio: make printf(%s) accept NULL
  tools/nolibc/stdlib: implement abort()
  ...

Pull EFI updates from Ard Biesheuvel:

 - Allow runtime services to be re-enabled at boot on RT kernels.

 - Provide access to secrets injected into the boot image by CoCo
   hypervisors (COnfidential COmputing)

 - Use DXE services on x86 to make the boot image executable after
   relocation, if needed.

 - Prefer mirrored memory for randomized allocations.

 - Only randomize the placement of the kernel image on arm64 if the
   loader has not already done so.

 - Add support for obtaining the boot hartid from EFI on RISC-V.

* tag 'efi-next-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL
  efi: stub: prefer mirrored memory for randomized allocations
  efi/arm64: libstub: run image in place if randomized by the loader
  efi: libstub: pass image handle to handle_kernel_image()
  efi: x86: Set the NX-compatibility flag in the PE header
  efi: libstub: ensure allocated memory to be executable
  efi: libstub: declare DXE services table
  efi: Add missing prototype for efi_capsule_setup_info
  docs: security: Add secrets/coco documentation
  efi: Register efi_secret platform device if EFI secret area is declared
  virt: Add efi_secret module to expose confidential computing secrets
  efi: Save location of EFI confidential computing area
  efi: Allow to enable EFI runtime services by default on RT

Combine all collected EDAC changes for submission into v5.19:

* edac-misc:
  EDAC/xgene: Fix typo processsors -> processors
  EDAC/i5100: Remove unused inline function i5100_nrecmema_dm_buf_id()
  EDAC/ghes: Change ghes_hw from global to static
  EDAC/armada_xp: Use devm_platform_ioremap_resource()
  EDAC/synopsys: Add a SPDX identifier
  EDAC/synopsys: Add driver support for i.MX platforms
  EDAC/dmc520: Don't print an error for each unconfigured interrupt line
  efi/cper: Reformat CPER memory error location to more readable
  EDAC/ghes: Unify CPER memory error location reporting
  efi/cper: Add a cper_mem_err_status_str() to decode error description
  powerpc/85xx: Remove fsl,85... bindings

* edac-alloc-cleanup:
  EDAC: Use kcalloc()
  EDAC/mc: Get rid of edac_align_ptr()
  EDAC/device: Sanitize edac_device_alloc_ctl_info() definition
  EDAC/device: Get rid of the silly one-shot memory allocation in edac_device_alloc_ctl_info()
  EDAC/pci: Get rid of the silly one-shot memory allocation in edac_pci_alloc_ctl_info()
  EDAC/mc: Get rid of silly one-shot struct allocation in edac_mc_alloc()
Signed-off-by: Borislav Petkov <bp@suse.de>