Commit 1b00767f ("MIPS: Remove PMC MSP71xx platform") removes all uses
of the config IRQ_MSP_CIC and IRQ_MSP_SLP.

Remove these two obsolete configs IRQ_MSP_CIC and IRQ_MSP_SLP.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Commit 85b9686d ("MIPS: ath79: drop platform device registration code")
removes all files arch/mips/ath79/dev-*.[ch], adjusts the Makefile, but
misses to adjust the Kconfig file. Hence, since then, the configs
ATH79_DEV_* are really dead.

Commit 3a77e0d7 ("MIPS: ath79: drop machfiles") already removes all
configs that select ATH79_DEV_* config. So at that point, they was not a
way to enable them with a kernel build configuration.

Remove these obsolete ATH79_DEV_* configs.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

SIBYTE_BCM1125H is identical to SIBYTE_SB1250, so remove one of them.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Looks like these boards were nether in active use, so let's remove them.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

SIBYTE_BCM1x55 is not selected anywhere, so let's get rid of it.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

With the direct use of memblock interface board_mem_region is no
longer needed.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

MT7620 SoCs have their own 'ralink_soc_info' structure with some
information about the soc itself. In order to be able to retrieve this
information from driver code and avoid architecture dependencies for
retrieving these details introduce this 'soc_device'. Set 'data' pointer
points to the struct 'ralink_soc_info' to be able to export also current
soc information using this mechanism. We need to select 'SOC_BUS' in
Kconfig configuration for these SoCs.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Move the SoC register value queries and tests to specific functions,
to remove repetition of logic. No functional changes intended
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

So that MT7620_SYSC_BASE can be used later in multiple functions without
needing to repeat this __iomem declaration each time
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

RT288X SoCs have their own 'ralink_soc_info' structure with some
information about the soc itself. In order to be able to retrieve this
information from driver code and avoid architecture dependencies for
retrieving these details introduce this 'soc_device'. Set 'data' pointer
points to the struct 'ralink_soc_info' to be able to export also current
soc information using this mechanism. We need to select 'SOC_BUS' in
Kconfig configuration for these SoCs.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

 Move the SoC register value queries and tests to specific functions,
 to remove repetition of logic. No functional changes intended
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

 So that RT2880_SYSC_BASE can be used later in multiple functions without
 needing to repeat this __iomem declaration each time
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

RT3883 SoC have its own 'ralink_soc_info' structure with some
information about the soc itself. In order to be able to retrieve this
information from driver code and avoid architecture dependencies for
retrieving these details introduce this 'soc_device'. Set 'data' pointer
points to the struct 'ralink_soc_info' to be able to export also current
soc information using this mechanism. We need to select 'SOC_BUS' in
Kconfig configuration for these SoCs.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

 Move the SoC register value queries and tests to specific functions,
 to remove repetition of logic. No functional changes intended
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

So that RT3883_SYSC_BASE can be used later in multiple functions without
needing to repeat this __iomem declaration each time
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

RT305x SoCs have their own 'ralink_soc_info' structure with some
information about the soc itself. In order to be able to retrieve this
information from driver code and avoid architecture dependencies for
retrieving these details introduce this 'soc_device'. Set 'data' pointer
points to the struct 'ralink_soc_info' to be able to export also current
soc information using this mechanism. We need to select 'SOC_BUS' in
Kconfig configuration for these SoCs.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Move the SoC register value queries and tests to specific functions,
to remove repetition of logic. No functional changes intended
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

So that RT305X_SYSC_BASE can be used later in multiple functions without
needing to repeat this __iomem declaration each time
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Add two Loongson-1 based boards: LSGZ 1B and Smartloong 1C.
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

It is clearly stated on "Loongson 3A3000/3B3000 processor
user manual vol 2" that

"All access requests using a non-cached algorithm are executed in a
blocking order. That is, before the current read request data is
returned to the processor, all subsequent requests are blocked and issued;
All subsequent requests are blocked until the write request data has been
sent or the issued write request has not received a write reply from the
final receiver."

Which means uncached read/write is strongly ordered. So we won't need this
workaround.

This option was introduced when we add initial support for GS464E, it looks
like a misinterpretation of another section in the manual saying we need
barriers to ensure MMIO order against DMA requests.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Q: Do we have really have write buffer
A: Yes, on newer Loongson processors there is a "store fill buffer"
   that will collect *cached* writes, on all Loongson processors
   AXI crossbar will buffer all writes.

Q: Then why do we want to remove CPU_HAS_WB?
A: Because CPU_HAS_WB introduces wbflush, which intends to flush
   all write reuqests to mmio device. We won't be affected by store
   fill buffer because it won't buffer uncached writes. And a regular
   memory barrier is sufficient to flush crossbar write buffer.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Previously every write to SMP regisers are followed by nudge_writes,
this incures a huge performance penalty because nudge_writes involves
SYNC, which will be globalized on chip.

Only set off nudge_writes when we really want other cores to see the
result ASAP. Also replace read/write functions to relaxed version because
we don't need extra barriers to protect against DMA.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

wbflush here intends to let other cores see the results ASAP,
nudge_writes fits this purpose better.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

They are truely mmio pointers, so give them proper prefix.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

It's a BCM5358 based home router. One of very few bcm47xx devices with
cellular modems (here: LTE).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

This reverts part of commit 015b8cc5 ("wifi: cfg80211: Fix use after
free for wext")

This commit broke WPA offload by unconditionally clearing the crypto
modes for non-WEP connections. Drop that part of the patch.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reported-by: Ilya <me@0upti.me>
Reported-and-tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Fixes: 015b8cc5 ("wifi: cfg80211: Fix use after free for wext")
Cc: stable@kernel.org
Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edfSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull tpm fixes from Jarkko Sakkinen:
 "Two additional bug fixes for v6.3"

* tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: disable hwrng for fTPM on some AMD designs
  tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address

AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS.  This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.

This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439 ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.

So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions.  As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.

It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.

Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it.  If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.

Link: https://www.amd.com/en/support/kb/faq/pa-410
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989
Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/
Fixes: b006c439 ("hwrng: core - start hwrng kthread also for untrusted sources")
Cc: stable@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Tested-by: reach622@mailcuk.com
Tested-by: Bell <1138267643@qq.com>
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.

Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.

The following hardware was used to test this issue:
    Framework Laptop (Pre-production)
    BIOS: INSYDE Corp, Revision: 3.2
    TPM Device: NTC, Firmware Revision: 7.2

Dump of the faulty ACPI TPM2 table:
    [000h 0000   4]                    Signature : "TPM2"    [Trusted Platform Module hardware interface Table]
    [004h 0004   4]                 Table Length : 0000004C
    [008h 0008   1]                     Revision : 04
    [009h 0009   1]                     Checksum : 2B
    [00Ah 0010   6]                       Oem ID : "INSYDE"
    [010h 0016   8]                 Oem Table ID : "TGL-ULT"
    [018h 0024   4]                 Oem Revision : 00000002
    [01Ch 0028   4]              Asl Compiler ID : "ACPI"
    [020h 0032   4]        Asl Compiler Revision : 00040000

    [024h 0036   2]               Platform Class : 0000
    [026h 0038   2]                     Reserved : 0000
    [028h 0040   8]              Control Address : 0000000000000000
    [030h 0048   4]                 Start Method : 06 [Memory Mapped I/O]

    [034h 0052  12]            Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00
    [040h 0064   4]           Minimum Log Length : 00010000
    [044h 0068   8]                  Log Address : 000000004053D000

Fixes: 0cf577a0 ("tpm: Fix handling of missing event log")
Tested-by: Erkki Eilonen <erkki@bearmetal.eu>
Signed-off-by: Morten Linderud <morten@linderud.pw>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Pull xfs fixes from Darrick Wong:

 - Fix a crash if mount time quotacheck fails when there are inodes
   queued for garbage collection.

 - Fix an off by one error when discarding folios after writeback
   failure.

* tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix off-by-one-block in xfs_discard_folio()
  xfs: quotacheck failure can race with background inode inactivation

Pull staging driver fixes and removal from Greg KH:
 "Here are four small staging driver fixes, and one big staging driver
  deletion for 6.3-rc2.

  The fixes are:

   - rtl8192e driver fixes for where the driver was attempting to
     execute various programs directly from the disk for unknown reasons

   - rtl8723bs driver fixes for issues found by Hans in testing

  The deleted driver is the removal of the r8188eu wireless driver as
  now in 6.3-rc1 we have a "real" wifi driver for one that includes
  support for many many more devices than this old driver did. So it's
  time to remove it as it is no longer needed. The maintainers of this
  driver all have acked its removal. Many thanks to them over the years
  for working to clean it up and keep it working while the real driver
  was being developed.

  All of these have been in linux-next this week with no reported
  problems"

* tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8188eu: delete driver
  staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
  staging: rtl8723bs: Fix key-store index handling
  staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
  staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script

Pull x86 fix from Borislav Petkov:
 "A single erratum fix for AMD machines:

   - Disable XSAVES on AMD Zen1 and Zen2 machines due to an erratum. No
     impact to anything as those machines will fallback to XSAVEC which
     is equivalent there"

* tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/CPU/AMD: Disable XSAVES on AMD family 0x17

Pull clone3 fix from Christian Brauner:
 "A simple fix for the clone3() system call.

  The CLONE_NEWTIME allows the creation of time namespaces. The flag
  reuses a bit from the CSIGNAL bits that are used in the legacy clone()
  system call to set the signal that gets sent to the parent after the
  child exits.

  The clone3() system call doesn't rely on CSIGNAL anymore as it uses a
  dedicated .exit_signal field in struct clone_args. So we blocked all
  CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced
  and reused a CSIGNAL bit we forgot to adapt clone3_args_valid()
  causing CLONE_NEWTIME with clone3() to be rejected. Fix this"

* tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
  selftests/clone3: test clone3 with CLONE_NEWTIME
  fork: allow CLONE_NEWTIME in clone3 flags

Pull vfs fixes from Christian Brauner:

 - When allocating pages for a watch queue failed, we didn't return an
   error causing userspace to proceed even though all subsequent
   notifcations would be lost. Make sure to return an error.

 - Fix a misformed tree entry for the idmapping maintainers entry.

 - When setting file leases from an idmapped mount via
   generic_setlease() we need to take the idmapping into account
   otherwise taking a lease would fail from an idmapped mount.

 - Remove two redundant assignments, one in splice code and the other in
   locks code, that static checkers complained about.

* tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  filelocks: use mount idmapping for setlease permission check
  fs/locks: Remove redundant assignment to cmd
  splice: Remove redundant assignment to ret
  MAINTAINERS: repair a malformed T: entry in IDMAPPED MOUNTS
  watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths

Pull ext4 fixes from Ted Ts'o:
 "Bug fixes and regressions for ext4, the most serious of which is a
  potential deadlock during directory renames that was introduced during
  the merge window discovered by a combination of syzbot and lockdep"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: zero i_disksize when initializing the bootloader inode
  ext4: make sure fs error flag setted before clear journal error
  ext4: commit super block if fs record error when journal record without error
  ext4, jbd2: add an optimized bmap for the journal inode
  ext4: fix WARNING in ext4_update_inline_data
  ext4: move where set the MAY_INLINE_DATA flag is set
  ext4: Fix deadlock during directory rename
  ext4: Fix comment about the 64BIT feature
  docs: ext4: modify the group desc size to 64
  ext4: fix another off-by-one fsmap error on 1k block filesystems
  ext4: fix RENAME_WHITEOUT handling for inline directories
  ext4: make kobj_type structures constant
  ext4: fix cgroup writeback accounting with fs-layer encryption

The cpumask_check() was unnecessarily tight, and causes problems for the
users of cpumask_next().

We have a number of users that take the previous return value of one of
the bit scanning functions and subtract one to keep it in "range".  But
since the scanning functions end up returning up to 'small_cpumask_bits'
instead of the tighter 'nr_cpumask_bits', the range really needs to be
using that widened form.

[ This "previous-1" behavior is also the reason we have all those
  comments about /* -1 is a legal arg here. */ and separate checks for
  that being ok.  So we could have just made "small_cpumask_bits-1"
  be a similar special "don't check this" value.

  Tetsuo Handa even suggested a patch that only does that for
  cpumask_next(), since that seems to be the only actual case that
  triggers, but that all makes it even _more_ magical and special. So
  just relax the check ]

One example of this kind of pattern being the 'c_start()' function in
arch/x86/kernel/cpu/proc.c, but also duplicated in various forms on
other architectures.

Reported-by: syzbot+96cae094d90877641f32@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=96cae094d90877641f32Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Link: https://lore.kernel.org/lkml/c1f4cc16-feea-b83c-82cf-1a1f007b7eb9@I-love.SAKURA.ne.jp/
Fixes: 596ff4a0 ("cpumask: re-introduce constant-sized cpumask optimizations")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull i2c updates from Wolfram Sang:
 "This marks the end of a transition to let I2C have the same probe
  semantics as other subsystems. Uwe took care that no drivers in the
  current tree nor in -next use the deprecated .probe call. So, it is a
  good time to switch to the new, standard semantics now.

  There is also a regression fix:

   - regression fix for the notifier handling of the I2C core

   - final coversions of drivers away from deprecated .probe

   - make .probe_new the standard probe and convert I2C core to use it

* tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: dev: Fix bus callback return values
  i2c: Convert drivers to new .probe() callback
  i2c: mux: Convert all drivers to new .probe() callback
  i2c: Switch .probe() to not take an id parameter
  media: i2c: ov2685: convert to i2c's .probe_new()
  media: i2c: ov5695: convert to i2c's .probe_new()
  w1: ds2482: Convert to i2c's .probe_new()
  serial: sc16is7xx: Convert to i2c's .probe_new()
  mtd: maps: pismo: Convert to i2c's .probe_new()
  misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()

Switching to BLK_MQ_F_BLOCKING wrongly removed the call to
blk_mq_end_request(). Add it back to have our IOs finished

Fixes: 91cc8fbc ("ubi: block: set BLK_MQ_F_BLOCKING")
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/linux-mtd/CAHk-=wi29bbBNh3RqJKu3PxzpjDN5D5K17gEVtXrb7-6bfrnMQ@mail.gmail.com/Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>