Make the KCS device drivers responsible for allocating their own memory.

Until now the private data for the device driver was allocated internal
to the private data for the chardev interface. This coupling required
the slightly awkward API of passing through the struct size for the
driver private data to the chardev constructor, and then retrieving a
pointer to the driver private data from the allocated chardev memory.

In addition to being awkward, the arrangement prevents the
implementation of alternative userspace interfaces as the device driver
private data is not independent.

Peel a layer off the onion and turn the data-structures inside out by
exploiting container_of() and embedding `struct kcs_device` in the
driver private data.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-6-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>

Take steps towards defining a coherent API to separate the KCS device
drivers from the userspace interface. Decreasing the coupling will
improve the separation of concerns and enable the introduction of
alternative userspace interfaces.

For now, simply split the chardev logic out to a separate file. The code
continues to build into the same module.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-5-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>

Rename the functions in preparation for separating the IPMI chardev out
from the KCS BMC core.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-4-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>

Enable more efficient implementation of read-modify-write sequences.
Both device drivers for the KCS BMC stack use regmaps. The new callback
allows us to exploit regmap_update_bits().
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-3-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>

Unpack and remove the aspeed_kcs_probe_of_v[12]() functions to aid
rearranging how the private device-driver memory is allocated.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-2-andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>

When an IPMI watchdog timer is being stopped in ipmi_close() or
ipmi_ioctl(WDIOS_DISABLECARD), the current watchdog action is updated to
WDOG_TIMEOUT_NONE and _ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB) is called
to install this action. The latter function ends up invoking
__ipmi_set_timeout() which makes the actual 'Set Watchdog Timer' IPMI
request.

For IPMI 1.0, this operation results in fully stopping the watchdog timer.
For IPMI >= 1.5, function __ipmi_set_timeout() always specifies the "don't
stop" flag in the prepared 'Set Watchdog Timer' IPMI request. This causes
that the watchdog timer has its action correctly updated to 'none' but the
timer continues to run. A problem is that IPMI firmware can then still log
an expiration event when the configured timeout is reached, which is
unexpected because the watchdog timer was requested to be stopped.

The patch fixes this problem by not setting the "don't stop" flag in
__ipmi_set_timeout() when the current action is WDOG_TIMEOUT_NONE which
results in stopping the watchdog timer. This makes the behaviour for
IPMI >= 1.5 consistent with IPMI 1.0. It also matches the logic in
__ipmi_heartbeat() which does not allow to reset the watchdog if the
current action is WDOG_TIMEOUT_NONE as that would start the timer.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Message-Id: <10a41bdc-9c99-089c-8d89-fa98ce5ea080@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>

Pull SCSI updates from James Bottomley:
 "This consists of the usual driver updates (ufs, target, tcmu,
  smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx).

  The major core change is using a sbitmap instead of an atomic for
  queue tracking"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits)
  scsi: target: tcm_fc: Fix a kernel-doc header
  scsi: target: Shorten ALUA error messages
  scsi: target: Fix two format specifiers
  scsi: target: Compare explicitly with SAM_STAT_GOOD
  scsi: sd: Introduce a new local variable in sd_check_events()
  scsi: dc395x: Open-code status_byte(u8) calls
  scsi: 53c700: Open-code status_byte(u8) calls
  scsi: smartpqi: Remove unused functions
  scsi: qla4xxx: Remove an unused function
  scsi: myrs: Remove unused functions
  scsi: myrb: Remove unused functions
  scsi: mpt3sas: Fix two kernel-doc headers
  scsi: fcoe: Suppress a compiler warning
  scsi: libfc: Fix a format specifier
  scsi: aacraid: Remove an unused function
  scsi: core: Introduce enum scsi_disposition
  scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case
  scsi: core: Rename scsi_softirq_done() into scsi_complete()
  scsi: core: Remove an incorrect comment
  scsi: core: Make the scsi_alloc_sgtables() documentation more accurate
  ...

Pull VFIO updates from Alex Williamson:

 - Embed struct vfio_device into vfio driver structures (Jason
   Gunthorpe)

 - Make vfio_mdev type safe (Jason Gunthorpe)

 - Remove vfio-pci NVLink2 extensions for POWER9 (Christoph Hellwig)

 - Update vfio-pci IGD extensions for OpRegion 2.1+ (Fred Gao)

 - Various spelling/blank line fixes (Zhen Lei, Zhou Wang, Bhaskar
   Chowdhury)

 - Simplify unpin_pages error handling (Shenming Lu)

 - Fix i915 mdev Kconfig dependency (Arnd Bergmann)

 - Remove unused structure member (Keqian Zhu)

* tag 'vfio-v5.13-rc1' of git://github.com/awilliam/linux-vfio: (43 commits)
  vfio/gvt: fix DRM_I915_GVT dependency on VFIO_MDEV
  vfio/iommu_type1: Remove unused pinned_page_dirty_scope in vfio_iommu
  vfio/mdev: Correct the function signatures for the mdev_type_attributes
  vfio/mdev: Remove kobj from mdev_parent_ops->create()
  vfio/gvt: Use mdev_get_type_group_id()
  vfio/gvt: Make DRM_I915_GVT depend on VFIO_MDEV
  vfio/mbochs: Use mdev_get_type_group_id()
  vfio/mdpy: Use mdev_get_type_group_id()
  vfio/mtty: Use mdev_get_type_group_id()
  vfio/mdev: Add mdev/mtype_get_type_group_id()
  vfio/mdev: Remove duplicate storage of parent in mdev_device
  vfio/mdev: Add missing error handling to dev_set_name()
  vfio/mdev: Reorganize mdev_device_create()
  vfio/mdev: Add missing reference counting to mdev_type
  vfio/mdev: Expose mdev_get/put_parent to mdev_private.h
  vfio/mdev: Use struct mdev_type in struct mdev_device
  vfio/mdev: Simplify driver registration
  vfio/mdev: Add missing typesafety around mdev_device
  vfio/mdev: Do not allow a mdev_type to have a NULL parent pointer
  vfio/mdev: Fix missing static's on MDEV_TYPE_ATTR's
  ...

Pull clk updates from Stephen Boyd:
 "Here's a collection of largely clk driver updates. The usual suspects
  are here: i.MX, Qualcomm, Renesas, Allwinner, Samsung, and Rockchip,
  but it feels pretty light on commits.

  There's only one real commit to the framework core and that's to
  consolidate code. Otherwise the diffstat is dominated by many Qualcomm
  clk driver patches that modernize the driver for the proper way of
  speciying clk parents. That's shifting data around, which could subtly
  break things so I'll be on the lookout for fixes.

  New Drivers:
   - Proper clk driver for Mediatek MT7621 SoCs
   - Support for the clock controller on the new Rockchip rk3568

  Updates:
   - Simplify Zynq Kconfig dependencies
   - Use clk_hw pointers in socfpga driver
   - Cleanup parent data in qcom clk drivers
   - Some cleanups for rk3399 modularization
   - Fix reparenting of i.MX UART clocks by initializing only the ones
     associated to stdout
   - Correct the PCIE clocks for i.MX8MP and i.MX8MQ
   - Make i.MX LPCG and SCU clocks return on registering failure
   - Kernel doc fixes
   - Add DAB hardware accelerator clocks on Renesas R-Car E3 and M3-N
   - Add timer (TMU) clocks on Renesas R-Car H3 ES1.0
   - Add Timer (TMU & CMT) and thermal sensor (TSC) clocks on
     Renesas R-Car V3U
   - Sigma-delta modulation on Allwinner V3s audio PLL"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (82 commits)
  MAINTAINERS: add MT7621 CLOCK maintainer
  staging: mt7621-dts: use valid vendor 'mediatek' instead of invalid 'mtk'
  staging: mt7621-dts: make use of new 'mt7621-clk'
  clk: ralink: add clock driver for mt7621 SoC
  clk: uniphier: Fix potential infinite loop
  clk: qcom: rpmh: add support for SDX55 rpmh IPA clock
  clk: qcom: gcc-sdm845: get rid of the test clock
  clk: qcom: convert SDM845 Global Clock Controller to parent_data
  dt-bindings: clock: separate SDM845 GCC clock bindings
  clk: qcom: apss-ipq-pll: Add missing MODULE_DEVICE_TABLE
  clk: qcom: a53-pll: Add missing MODULE_DEVICE_TABLE
  clk: qcom: a7-pll: Add missing MODULE_DEVICE_TABLE
  dt: bindings: add mt7621-sysc device tree binding documentation
  dt-bindings: clock: add dt binding header for mt7621 clocks
  clk: samsung: Remove redundant dev_err calls
  clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable
  clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback
  clk: zynqmp: Drop dependency on ARCH_ZYNQMP
  clk: zynqmp: Enable the driver if ZYNQMP_FIRMWARE is selected
  clk: qcom: gcc-sm8350: use ARRAY_SIZE instead of specifying num_parents
  ...

Pull mailbox updates from Jassi Brar:
 "qcom:
   - enable support for SM8350 and SC7280

  sprd:
   - refcount channel usage
   - specify interrupt names in dt
   - support sc9863a

  arm:
   - drop redundant print

  ti:
   - convert dt-bindings to json schema

  and misc spelling fixes"

* tag 'mailbox-v5.13' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  dt-bindings: mailbox: qcom-ipcc: Add compatible for SC7280
  dt-bindings: mailbox: ti,secure-proxy: Convert to json schema
  mailbox: arm_mhu_db: Remove redundant dev_err call in mhu_db_probe()
  mailbox: sprd: Add supplementary inbox support
  dt-bindings: mailbox: Add interrupt-names to SPRD mailbox
  mailbox: sprd: Introduce refcnt when clients requests/free channels
  MAINTAINERS: Add DT bindings directory to mailbox
  mailbox: fix various typos in comments
  mailbox: pcc: fix platform_no_drv_owner.cocci warnings
  dt-bindings: mailbox: Add compatible for SM8350 IPCC

Pull backlight updates from Lee Jones:
 "New Device Support:
   - Add support for PMI8994 to Qualcom WLED
   - Add support for KTD259 to Kinetic KTD253

  Fix-ups:
   - Device Tree related fix-ups; kinetic,ktd253
   - Use proper sequence during sync_toggle; qcom-wled
   - Fix Wmisleading-indentation warnings; jornada720_bl

  Bug Fixes:
   - Fix sync toggle on WLED4; qcom-wled
   - Fix FSC update on WLED5; qcom-wled"

* tag 'backlight-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: journada720: Fix Wmisleading-indentation warning
  backlight: qcom-wled: Correct the sync_toggle sequence
  backlight: qcom-wled: Fix FSC update issue for WLED5
  dt-bindings: backlight: Add Kinetic KTD259 bindings
  backlight: ktd253: Support KTD259
  backlight: qcom-wled: Use sink_addr for sync toggle
  dt-bindings: backlight: qcom-wled: Add PMI8994 compatible

Pull MFD updates from Lee Jones:
 "Core Framework:
   - Add support for Software Nodes to MFD Core
   - Remove support for Device Properties from MFD Core
   - Use standard APIs in MFD Core

  New Drivers:
   - Add support for ROHM BD9576MUF and BD9573MUF PMICs
   - Add support for Netronix Embedded Controller, PWM and RTC
   - Add support for Actions Semi ATC260x PMICs and OnKey

  New Device Support:
   - Add support for DG1 PCIe Graphics Card to Intel PMT
   - Add support for ROHM BD71815 PMIC to ROHM BD71828
   - Add support for Tolino Shine 2 HD to Netronix Embedded Controller
   - Add support for AX10 BMC Secure Updates to Intel M10 BMC

  Removed Device Support:
   - Remove Arizona Extcon support from MFD
   - Remove ST-E AB8500 Power Supply code from MFD
   - Remove AB3100 altogether

  New Functionality:
   - Add support for SMBus and I2C modes to Dialog DA9063
   - Switch to using Software Nodes in Intel (various)

  New/converted Device Tree bindings:
   - rohm bd71815-pmic, rohm bd9576-pmic, netronix ntxec, actions
     atc260x, ricoh rn5t618, qcom pm8xxx

- Fix-ups:
   - Fix error handling/path; intel_pmt
   - Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc
   - Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618,
     max8997
   - Use correct data-type; db8500-prcmu
   - Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl
   - Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio
   - Regmap related fix-ups; intel-m10-bmc, sec-core
   - Reorder resource freeing during remove; intel_quark_i2c_gpio
   - Make table indexing more robust; intel_quark_i2c_gpio
   - Fix reference imbalances; arizona-irq
   - Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930,
     intel-lpss-acpi, intel-lpss-pci, atc260x-i2c, intel_quark_i2c_gpio

  Bug Fixes:
   - Fix incorrect (register) values; intel-m10-bmc
   - Kconfig related fixes; ABX500_CORE
   - Do not clear the Auto Reload Register; stm32-timers"

* tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits)
  mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates
  Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell"
  mfd: twl: Remove unused inline function twl4030charger_usb_en()
  dt-bindings: mfd: Convert pm8xxx bindings to yaml
  dt-bindings: mfd: Add compatible for pmk8350 rtc
  i2c: designware: Get rid of legacy platform data
  mfd: intel_quark_i2c_gpio: Convert I²C to use software nodes
  mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000"
  mfd: arizona: Fix rumtime PM imbalance on error
  mfd: max8997: Replace 8998 with 8997
  mfd: core: Use acpi_find_child_device() for child devices lookup
  mfd: intel_quark_i2c_gpio: Don't play dirty trick with const
  mfd: intel_quark_i2c_gpio: Enable MSI interrupt
  mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexing
  mfd: ntxec: Support for EC in Tolino Shine 2 HD
  mfd: stm32-timers: Avoid clearing auto reload register
  mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions
  mfd: intel_quark_i2c_gpio: Remove unused struct device member
  mfd: intel_quark_i2c_gpio: Unregister resources in reversed order
  mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500
  ...

Pull MMC and MEMSTICK updates from Ulf Hansson:
 "MMC core:
   - Fix hanging on I/O during system suspend for removable cards
   - Set read only for SD cards with permanent write protect bit
   - Power cycle the SD/SDIO card if CMD11 fails for UHS voltage
   - Issue a cache flush for eMMC only when it's enabled
   - Adopt to updated cache ctrl settings for eMMC from MMC ioctls
   - Use use device property API when parsing voltages
   - Don't retry eMMC sanitize cmds
   - Use the timeout from the MMC ioctl for eMMC santize cmds

  MMC host:
   - mmc_spi: Make of_mmc_spi.c resource provider agnostic
   - mmc_spi: Use polling for card detect even without voltage-ranges
   - sdhci: Check for reset prior to DMA address unmap
   - sdhci-acpi: Add support for the AMDI0041 eMMC controller variant
   - sdhci-esdhc-imx: Depending on OF Kconfig and cleanup code
   - sdhci-pci: Add PCI IDs for Intel LKF
   - sdhci-pci: Fix initialization of some SD cards for Intel BYT
   - sdhci-pci-gli: Various improvements for GL97xx variants
   - sdhci-of-dwcmshc: Enable support for MMC_CAP_WAIT_WHILE_BUSY
   - sdhci-of-dwcmshc: Add ACPI support for BlueField-3 SoC
   - sdhci-of-dwcmshc: Add Rockchip platform support
   - tmio/renesas_sdhi: Extend support for reset and use a reset controller
   - tmio/renesas_sdhi: Enable support for MMC_CAP_WAIT_WHILE_BUSY
   - tmio/renesas_sdhi: Various improvements

  MEMSTICK:
   - Minor improvements/cleanups"

* tag 'mmc-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (79 commits)
  mmc: block: Issue a cache flush only when it's enabled
  memstick: r592: ignore kfifo_out() return code again
  mmc: block: Update ext_csd.cache_ctrl if it was written
  mmc: mmc_spi: Make of_mmc_spi.c resource provider agnostic
  mmc: mmc_spi: Use already parsed IRQ
  mmc: mmc_spi: Drop unused NO_IRQ definition
  mmc: mmc_spi: Set up polling even if voltage-ranges is not present
  mmc: core: Convert mmc_of_parse_voltage() to use device property API
  mmc: core: Correct descriptions in mmc_of_parse()
  mmc: dw_mmc-rockchip: Just set default sample value for legacy mode
  mmc: sdhci-s3c: constify uses of driver/match data
  mmc: sdhci-s3c: correct kerneldoc of sdhci_s3c_drv_data
  mmc: sdhci-s3c: simplify getting of_device_id match data
  mmc: tmio: always restore irq register
  mmc: sdhci-pci-gli: Enlarge ASPM L1 entry delay of GL975x
  mmc: core: Let eMMC sanitize not retry in case of timeout/failure
  mmc: core: Add a retries parameter to __mmc_switch function
  memstick: r592: remove unused variable
  mmc: sdhci-st: Remove unnecessary error log
  mmc: sdhci-msm: Remove unnecessary error log
  ...

Pull IPMI updates from Corey Minyard:
 "A bunch of little cleanups

  Nothing major, no functional changes"

* tag 'for-linus-5.13-1' of git://github.com/cminyard/linux-ipmi:
  ipmi_si: Join string literals back
  ipmi_si: Drop redundant check before calling put_device()
  ipmi_si: Use strstrip() to remove surrounding spaces
  ipmi_si: Get rid of ->addr_source_cleanup()
  ipmi_si: Reuse si_to_str[] array in ipmi_hardcode_init_one()
  ipmi_si: Introduce ipmi_panic_event_str[] array
  ipmi_si: Use proper ACPI macros to check error code for failures
  ipmi_si: Utilize temporary variable to hold device pointer
  ipmi_si: Remove bogus err_free label
  ipmi_si: Switch to use platform_get_mem_or_io()
  ipmi: Handle device properties with software node API
  ipmi:ssif: make ssif_i2c_send() void
  ipmi: Refine retry conditions for getting device id

Pull devicetree updates from Rob Herring:

 - Refactor powerpc and arm64 kexec DT handling to common code. This
   enables IMA on arm64.

 - Add kbuild support for applying DT overlays at build time. The first
   user are the DT unittests.

 - Fix kerneldoc formatting and W=1 warnings in drivers/of/

 - Fix handling 64-bit flag on PCI resources

 - Bump dtschema version required to v2021.2.1

 - Enable undocumented compatible checks for dtbs_check. This allows
   tracking of missing binding schemas.

 - DT docs improvements. Regroup the DT docs and add the example schema
   and DT kernel ABI docs to the doc build.

 - Convert Broadcom Bluetooth and video-mux bindings to schema

 - Add QCom sm8250 Venus video codec binding schema

 - Add vendor prefixes for AESOP, YIC System Co., Ltd, and Siliconfile
   Technologies Inc.

 - Cleanup of DT schema type references on common properties and
   standard unit properties

* tag 'devicetree-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
  powerpc: If kexec_build_elf_info() fails return immediately from elf64_load()
  powerpc: Free fdt on error in elf64_load()
  of: overlay: Fix kerneldoc warning in of_overlay_remove()
  of: linux/of.h: fix kernel-doc warnings
  of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses
  dt-bindings: bcm4329-fmac: add optional brcm,ccode-map
  docs: dt: update writing-schema.rst references
  dt-bindings: media: venus: Add sm8250 dt schema
  of: base: Fix spelling issue with function param 'prop'
  docs: dt: Add DT API documentation
  of: Add missing 'Return' section in kerneldoc comments
  of: Fix kerneldoc output formatting
  docs: dt: Group DT docs into relevant sub-sections
  docs: dt: Make 'Devicetree' wording more consistent
  docs: dt: writing-schema: Include the example schema in the doc build
  docs: dt: writing-schema: Remove spurious indentation
  dt-bindings: Fix reference in submitting-patches.rst to the DT ABI doc
  dt-bindings: ddr: Add optional manufacturer and revision ID to LPDDR3
  dt-bindings: media: video-interfaces: Drop the example
  devicetree: bindings: clock: Minor typo fix in the file armada3700-tbg-clock.txt
  ...

Pull power supply and reset updates from Sebastian Reichel:
 "battery/charger driver changes:
   - core:
      - provide function stubs if CONFIG_POWER_SUPPLY=n
      - reduce loglevel for probe defer info
   - surface:
      - new battery and charger drivers for Surface
   - bq27xxx:
      - add bq78z100 support
      - fix current_now/power_avg for newer chips
   - cw2015:
      - add CHARGE_NOW support
   - ab8500:
      - drop pdata support
   - convert most DT bindings to YAML
   - lots of minor fixes and cleanups

  reset drivers:
   - ltc2952-poweroff:
      - make trigger delay configurable from DT
   - minor fixes and cleanups"

* tag 'for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (97 commits)
  power: supply: cpcap-battery: fix invalid usage of list cursor
  power: supply: bq256xx: add kerneldoc for structure members
  power: supply: act8945a: correct kerneldoc
  power: supply: max17040: remove unneeded double cast
  power: supply: max17040: handle device_property_read_u8_array() failure
  power: supply: max14577: remove unneeded variable initialization
  power: supply: surface-charger: Make symbol 'surface_ac_pm_ops' static
  power: supply: surface-battery: Make some symbols static
  power: reset: restart-poweroff: Add missing MODULE_DEVICE_TABLE
  power: reset: hisi-reboot: add missing MODULE_DEVICE_TABLE
  power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove()
  power: supply: generic-adc-battery: fix possible use-after-free in gab_remove()
  power: supply: Add AC driver for Surface Aggregator Module
  power: supply: Add battery driver for Surface Aggregator Module
  power: supply: bq25980: Move props from battery node
  power: supply: core: Use true and false for bool variable
  power: supply: goldfish: Remove the GOLDFISH dependency
  power: reset: ltc2952: make trigger delay configurable
  power: supply: cpcap-charger: Simplify bool conversion
  power: supply: cpcap-charger: Add usleep to cpcap charger to avoid usb plug bounce
  ...

Pull HSI update from Sebastian Reichel:

 - memory leak fix in hsi_add_client_from_dt() error path

* tag 'hsi-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: core: fix resource leaks in hsi_add_client_from_dt()

Pull io_uring updates from Jens Axboe:

 - Support for multi-shot mode for POLL requests

 - More efficient reference counting. This is shamelessly stolen from
   the mm side. Even though referencing is mostly single/dual user, the
   128 count was retained to keep the code the same. Maybe this
   should/could be made generic at some point.

 - Removal of the need to have a manager thread for each ring. The
   manager threads only job was checking and creating new io-threads as
   needed, instead we handle this from the queue path.

 - Allow SQPOLL without CAP_SYS_ADMIN or CAP_SYS_NICE. Since 5.12, this
   thread is "just" a regular application thread, so no need to restrict
   use of it anymore.

 - Cleanup of how internal async poll data lifetime is managed.

 - Fix for syzbot reported crash on SQPOLL cancelation.

 - Make buffer registration more like file registrations, which includes
   flexibility in avoiding full set unregistration and re-registration.

 - Fix for io-wq affinity setting.

 - Be a bit more defensive in task->pf_io_worker setup.

 - Various SQPOLL fixes.

 - Cleanup of SQPOLL creds handling.

 - Improvements to in-flight request tracking.

 - File registration cleanups.

 - Tons of cleanups and little fixes

* tag 'for-5.13/io_uring-2021-04-27' of git://git.kernel.dk/linux-block: (156 commits)
  io_uring: maintain drain logic for multishot poll requests
  io_uring: Check current->io_uring in io_uring_cancel_sqpoll
  io_uring: fix NULL reg-buffer
  io_uring: simplify SQPOLL cancellations
  io_uring: fix work_exit sqpoll cancellations
  io_uring: Fix uninitialized variable up.resv
  io_uring: fix invalid error check after malloc
  io_uring: io_sq_thread() no longer needs to reset current->pf_io_worker
  kernel: always initialize task->pf_io_worker to NULL
  io_uring: update sq_thread_idle after ctx deleted
  io_uring: add full-fledged dynamic buffers support
  io_uring: implement fixed buffers registration similar to fixed files
  io_uring: prepare fixed rw for dynanic buffers
  io_uring: keep table of pointers to ubufs
  io_uring: add generic rsrc update with tags
  io_uring: add IORING_REGISTER_RSRC
  io_uring: enumerate dynamic resources
  io_uring: add generic path for rsrc update
  io_uring: preparation for rsrc tagging
  io_uring: decouple CQE filling from requests
  ...

Pull libata updates from Jens Axboe:
 "Mostly cleanups this time, but also a few additions:

   - kernel-doc cleanups and sanitization (Lee)

   - Spelling fix (Bhaskar)

   - Fix ata_qc_from_tag() return value check in dwc_460ex (Dinghao)

   - Fall-through warning fix (Gustavo)

   - IRQ registration fixes (Sergey)

   - Add AHCI support for Tegra186 (Sowjanya)

   - Add xiling phy support for AHCI (Piyush)

   - SXS disable fix for AHCI for Hisilicon Kunpeng920 (Xingui)

   - pata legacy probe mask support (Maciej)"

* tag 'for-5.13/libata-2021-04-27' of git://git.kernel.dk/linux-block: (54 commits)
  libata: Fix fall-through warnings for Clang
  pata_ipx4xx_cf: Fix unsigned comparison with less than zero
  ata: ahci_tegra: call tegra_powergate_power_off only when PM domain is not present
  ata: ahci_tegra: Add AHCI support for Tegra186
  dt-binding: ata: tegra: Add dt-binding documentation for Tegra186
  dt-bindings: ata: tegra: Convert binding documentation to YAML
  pata_legacy: Add `probe_mask' parameter like with ide-generic
  pata_platform: Document `pio_mask' module parameter
  pata_legacy: Properly document module parameters
  ata: ahci: ceva: Updated code by using dev_err_probe()
  ata: ahci: Disable SXS for Hisilicon Kunpeng920
  ata: libahci_platform: fix IRQ check
  sata_mv: add IRQ checks
  ata: pata_acpi: Fix some incorrect function param descriptions
  ata: libata-acpi: Fix function name and provide description for 'prev_gtf'
  ata: sata_mv: Fix misnaming of 'mv_bmdma_stop()'
  ata: pata_cs5530: Fix misspelling of 'cs5530_init_one()'s 'pdev' param
  ata: pata_legacy: Repair a couple kernel-doc problems
  ata: ata_generic: Fix misspelling of 'ata_generic_init_one()'
  ata: pata_opti: Fix spelling issue of 'val' in 'opti_write_reg()'
  ...

Pull block driver updates from Jens Axboe:

 - MD changes via Song:
        - raid5 POWER fix
        - raid1 failure fix
        - UAF fix for md cluster
        - mddev_find_or_alloc() clean up
        - Fix NULL pointer deref with external bitmap
        - Performance improvement for raid10 discard requests
        - Fix missing information of /proc/mdstat

 - rsxx const qualifier removal (Arnd)

 - Expose allocated brd pages (Calvin)

 - rnbd via Gioh Kim:
        - Change maintainer
        - Change domain address of maintainers' email
        - Add polling IO mode and document update
        - Fix memory leak and some bug detected by static code analysis
          tools
        - Code refactoring

 - Series of floppy cleanups/fixes (Denis)

 - s390 dasd fixes (Julian)

 - kerneldoc fixes (Lee)

 - null_blk double free (Lv)

 - null_blk virtual boundary addition (Max)

 - Remove xsysace driver (Michal)

 - umem driver removal (Davidlohr)

 - ataflop fixes (Dan)

 - Revalidate disk removal (Christoph)

 - Bounce buffer cleanups (Christoph)

 - Mark lightnvm as deprecated (Christoph)

 - mtip32xx init cleanups (Shixin)

 - Various fixes (Tian, Gustavo, Coly, Yang, Zhang, Zhiqiang)

* tag 'for-5.13/drivers-2021-04-27' of git://git.kernel.dk/linux-block: (143 commits)
  async_xor: increase src_offs when dropping destination page
  drivers/block/null_blk/main: Fix a double free in null_init.
  md/raid1: properly indicate failure when ending a failed write request
  md-cluster: fix use-after-free issue when removing rdev
  nvme: introduce generic per-namespace chardev
  nvme: cleanup nvme_configure_apst
  nvme: do not try to reconfigure APST when the controller is not live
  nvme: add 'kato' sysfs attribute
  nvme: sanitize KATO setting
  nvmet: avoid queuing keep-alive timer if it is disabled
  brd: expose number of allocated pages in debugfs
  ataflop: fix off by one in ataflop_probe()
  ataflop: potential out of bounds in do_format()
  drbd: Fix fall-through warnings for Clang
  block/rnbd: Use strscpy instead of strlcpy
  block/rnbd-clt-sysfs: Remove copy buffer overlap in rnbd_clt_get_path_name
  block/rnbd-clt: Remove max_segment_size
  block/rnbd-clt: Generate kobject_uevent when the rnbd device state changes
  block/rnbd-srv: Remove unused arguments of rnbd_srv_rdma_ev
  Documentation/ABI/rnbd-clt: Add description for nr_poll_queues
  ...

Pull block updates from Jens Axboe:
 "Pretty quiet round this time, which is nice. In detail:

   - Series revamping bounce buffer support (Christoph)

   - Dead code removal (Christoph, Bart)

   - Partition iteration revamp, now using xarray (Christoph)

   - Passthrough request scheduler improvements (Lin)

   - Series of BFQ improvements (Paolo)

   - Fix ioprio task iteration (Peter)

   - Various little tweaks and fixes (Tejun, Saravanan, Bhaskar, Max,
     Nikolay)"

* tag 'for-5.13/block-2021-04-27' of git://git.kernel.dk/linux-block: (41 commits)
  blk-iocost: don't ignore vrate_min on QD contention
  blk-mq: Fix spurious debugfs directory creation during initialization
  bfq/mq-deadline: remove redundant check for passthrough request
  blk-mq: bypass IO scheduler's limit_depth for passthrough request
  block: Remove an obsolete comment from sg_io()
  block: move bio_list_copy_data to pktcdvd
  block: remove zero_fill_bio_iter
  block: add queue_to_disk() to get gendisk from request_queue
  block: remove an incorrect check from blk_rq_append_bio
  block: initialize ret in bdev_disk_changed
  block: Fix sys_ioprio_set(.which=IOPRIO_WHO_PGRP) task iteration
  block: remove disk_part_iter
  block: simplify diskstats_show
  block: simplify show_partition
  block: simplify printk_all_partitions
  block: simplify partition_overlaps
  block: simplify partition removal
  block: take bd_mutex around delete_partitions in del_gendisk
  block: refactor blk_drop_partitions
  block: move more syncing and invalidation to delete_partition
  ...

Pull scheduler updates from Ingo Molnar:

 - Clean up SCHED_DEBUG: move the decades old mess of sysctl, procfs and
   debugfs interfaces to a unified debugfs interface.

 - Signals: Allow caching one sigqueue object per task, to improve
   performance & latencies.

 - Improve newidle_balance() irq-off latencies on systems with a large
   number of CPU cgroups.

 - Improve energy-aware scheduling

 - Improve the PELT metrics for certain workloads

 - Reintroduce select_idle_smt() to improve load-balancing locality -
   but without the previous regressions

 - Add 'scheduler latency debugging': warn after long periods of pending
   need_resched. This is an opt-in feature that requires the enabling of
   the LATENCY_WARN scheduler feature, or the use of the
   resched_latency_warn_ms=xx boot parameter.

 - CPU hotplug fixes for HP-rollback, and for the 'fail' interface. Fix
   remaining balance_push() vs. hotplug holes/races

 - PSI fixes, plus allow /proc/pressure/ files to be written by
   CAP_SYS_RESOURCE tasks as well

 - Fix/improve various load-balancing corner cases vs. capacity margins

 - Fix sched topology on systems with NUMA diameter of 3 or above

 - Fix PF_KTHREAD vs to_kthread() race

 - Minor rseq optimizations

 - Misc cleanups, optimizations, fixes and smaller updates

* tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits)
  cpumask/hotplug: Fix cpu_dying() state tracking
  kthread: Fix PF_KTHREAD vs to_kthread() race
  sched/debug: Fix cgroup_path[] serialization
  sched,psi: Handle potential task count underflow bugs more gracefully
  sched: Warn on long periods of pending need_resched
  sched/fair: Move update_nohz_stats() to the CONFIG_NO_HZ_COMMON block to simplify the code & fix an unused function warning
  sched/debug: Rename the sched_debug parameter to sched_verbose
  sched,fair: Alternative sched_slice()
  sched: Move /proc/sched_debug to debugfs
  sched,debug: Convert sysctl sched_domains to debugfs
  debugfs: Implement debugfs_create_str()
  sched,preempt: Move preempt_dynamic to debug.c
  sched: Move SCHED_DEBUG sysctl to debugfs
  sched: Don't make LATENCYTOP select SCHED_DEBUG
  sched: Remove sched_schedstats sysctl out from under SCHED_DEBUG
  sched/numa: Allow runtime enabling/disabling of NUMA balance without SCHED_DEBUG
  sched: Use cpu_dying() to fix balance_push vs hotplug-rollback
  cpumask: Introduce DYING mask
  cpumask: Make cpu_{online,possible,present,active}() inline
  rseq: Optimise rseq_get_rseq_cs() and clear_rseq_cs()
  ...

Pull perf event updates from Ingo Molnar:

 - Improve Intel uncore PMU support:

     - Parse uncore 'discovery tables' - a new hardware capability
       enumeration method introduced on the latest Intel platforms. This
       table is in a well-defined PCI namespace location and is read via
       MMIO. It is organized in an rbtree.

       These uncore tables will allow the discovery of standard counter
       blocks, but fancier counters still need to be enumerated
       explicitly.

     - Add Alder Lake support

     - Improve IIO stacks to PMON mapping support on Skylake servers

 - Add Intel Alder Lake PMU support - which requires the introduction of
   'hybrid' CPUs and PMUs. Alder Lake is a mix of Golden Cove ('big')
   and Gracemont ('small' - Atom derived) cores.

   The CPU-side feature set is entirely symmetrical - but on the PMU
   side there's core type dependent PMU functionality.

 - Reduce data loss with CPU level hardware tracing on Intel PT / AUX
   profiling, by fixing the AUX allocation watermark logic.

 - Improve ring buffer allocation on NUMA systems

 - Put 'struct perf_event' into their separate kmem_cache pool

 - Add support for synchronous signals for select perf events. The
   immediate motivation is to support low-overhead sampling-based race
   detection for user-space code. The feature consists of the following
   main changes:

     - Add thread-only event inheritance via
       perf_event_attr::inherit_thread, which limits inheritance of
       events to CLONE_THREAD.

     - Add the ability for events to not leak through exec(), via
       perf_event_attr::remove_on_exec.

     - Allow the generation of SIGTRAP via perf_event_attr::sigtrap,
       extend siginfo with an u64 ::si_perf, and add the breakpoint
       information to ::si_addr and ::si_perf if the event is
       PERF_TYPE_BREAKPOINT.

   The siginfo support is adequate for breakpoints right now - but the
   new field can be used to introduce support for other types of
   metadata passed over siginfo as well.

 - Misc fixes, cleanups and smaller updates.

* tag 'perf-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  signal, perf: Add missing TRAP_PERF case in siginfo_layout()
  signal, perf: Fix siginfo_t by avoiding u64 on 32-bit architectures
  perf/x86: Allow for 8<num_fixed_counters<16
  perf/x86/rapl: Add support for Intel Alder Lake
  perf/x86/cstate: Add Alder Lake CPU support
  perf/x86/msr: Add Alder Lake CPU support
  perf/x86/intel/uncore: Add Alder Lake support
  perf: Extend PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE
  perf/x86/intel: Add Alder Lake Hybrid support
  perf/x86: Support filter_match callback
  perf/x86/intel: Add attr_update for Hybrid PMUs
  perf/x86: Add structures for the attributes of Hybrid PMUs
  perf/x86: Register hybrid PMUs
  perf/x86: Factor out x86_pmu_show_pmu_cap
  perf/x86: Remove temporary pmu assignment in event_init
  perf/x86/intel: Factor out intel_pmu_check_extra_regs
  perf/x86/intel: Factor out intel_pmu_check_event_constraints
  perf/x86/intel: Factor out intel_pmu_check_num_counters
  perf/x86: Hybrid PMU support for extra_regs
  perf/x86: Hybrid PMU support for event constraints
  ...

Pull objtool updates from Ingo Molnar:

 - Standardize the crypto asm code so that it looks like compiler-
   generated code to objtool - so that it can understand it. This
   enables unwinding from crypto asm code - and also fixes the last
   known remaining objtool warnings for LTO and more.

 - x86 decoder fixes: clean up and fix the decoder, and also extend it a
   bit

 - Misc fixes and cleanups

* tag 'objtool-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/crypto: Enable objtool in crypto code
  x86/crypto/sha512-ssse3: Standardize stack alignment prologue
  x86/crypto/sha512-avx2: Standardize stack alignment prologue
  x86/crypto/sha512-avx: Standardize stack alignment prologue
  x86/crypto/sha256-avx2: Standardize stack alignment prologue
  x86/crypto/sha1_avx2: Standardize stack alignment prologue
  x86/crypto/sha_ni: Standardize stack alignment prologue
  x86/crypto/crc32c-pcl-intel: Standardize jump table
  x86/crypto/camellia-aesni-avx2: Unconditionally allocate stack buffer
  x86/crypto/aesni-intel_avx: Standardize stack alignment prologue
  x86/crypto/aesni-intel_avx: Fix register usage comments
  x86/crypto/aesni-intel_avx: Remove unused macros
  objtool: Support asm jump tables
  objtool: Parse options from OBJTOOL_ARGS
  objtool: Collate parse_options() users
  objtool: Add --backup
  objtool,x86: More ModRM sugar
  objtool,x86: Rewrite ADD/SUB/AND
  objtool,x86: Support %riz encodings
  objtool,x86: Simplify register decode
  ...

Pull locking updates from Ingo Molnar:

 - rtmutex cleanup & spring cleaning pass that removes ~400 lines of
   code

 - Futex simplifications & cleanups

 - Add debugging to the CSD code, to help track down a tenacious race
   (or hw problem)

 - Add lockdep_assert_not_held(), to allow code to require a lock to not
   be held, and propagate this into the ath10k driver

 - Misc LKMM documentation updates

 - Misc KCSAN updates: cleanups & documentation updates

 - Misc fixes and cleanups

 - Fix locktorture bugs with ww_mutexes

* tag 'locking-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  kcsan: Fix printk format string
  static_call: Relax static_call_update() function argument type
  static_call: Fix unused variable warn w/o MODULE
  locking/rtmutex: Clean up signal handling in __rt_mutex_slowlock()
  locking/rtmutex: Restrict the trylock WARN_ON() to debug
  locking/rtmutex: Fix misleading comment in rt_mutex_postunlock()
  locking/rtmutex: Consolidate the fast/slowpath invocation
  locking/rtmutex: Make text section and inlining consistent
  locking/rtmutex: Move debug functions as inlines into common header
  locking/rtmutex: Decrapify __rt_mutex_init()
  locking/rtmutex: Remove pointless CONFIG_RT_MUTEXES=n stubs
  locking/rtmutex: Inline chainwalk depth check
  locking/rtmutex: Move rt_mutex_debug_task_free() to rtmutex.c
  locking/rtmutex: Remove empty and unused debug stubs
  locking/rtmutex: Consolidate rt_mutex_init()
  locking/rtmutex: Remove output from deadlock detector
  locking/rtmutex: Remove rtmutex deadlock tester leftovers
  locking/rtmutex: Remove rt_mutex_timed_lock()
  MAINTAINERS: Add myself as futex reviewer
  locking/mutex: Remove repeated declaration
  ...

Pull RCU updates from Ingo Molnar:

 - Support for "N" as alias for last bit in bitmap parsing library (eg
   using syntax like "nohz_full=2-N")

 - kvfree_rcu updates

 - mm_dump_obj() updates. (One of these is to mm, but was suggested by
   Andrew Morton.)

 - RCU callback offloading update

 - Polling RCU grace-period interfaces

 - Realtime-related RCU updates

 - Tasks-RCU updates

 - Torture-test updates

 - Torture-test scripting updates

 - Miscellaneous fixes

* tag 'core-rcu-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
  rcutorture: Test start_poll_synchronize_rcu() and poll_state_synchronize_rcu()
  rcu: Provide polling interfaces for Tiny RCU grace periods
  torture: Fix kvm.sh --datestamp regex check
  torture: Consolidate qemu-cmd duration editing into kvm-transform.sh
  torture: Print proper vmlinux path for kvm-again.sh runs
  torture: Make TORTURE_TRUST_MAKE available in kvm-again.sh environment
  torture: Make kvm-transform.sh update jitter commands
  torture: Add --duration argument to kvm-again.sh
  torture: Add kvm-again.sh to rerun a previous torture-test
  torture: Create a "batches" file for build reuse
  torture: De-capitalize TORTURE_SUITE
  torture: Make upper-case-only no-dot no-slash scenario names official
  torture: Rename SRCU-t and SRCU-u to avoid lowercase characters
  torture: Remove no-mpstat error message
  torture: Record kvm-test-1-run.sh and kvm-test-1-run-qemu.sh PIDs
  torture: Record jitter start/stop commands
  torture: Extract kvm-test-1-run-qemu.sh from kvm-test-1-run.sh
  torture: Record TORTURE_KCONFIG_GDB_ARG in qemu-cmd
  torture: Abstract jitter.sh start/stop into scripts
  rcu: Provide polling interfaces for Tree RCU grace periods
  ...

Pull drm updates from Dave Airlie:
 "The usual lots of work all over the place.

  i915 has gotten some Alderlake work and prelim DG1 code, along with a
  major locking rework over the GEM code, and brings back the property
  of timing out long running jobs using a watchdog. amdgpu has some
  Alderbran support (new GPU), freesync HDMI support along with a lot
  other fixes.

  Outside of the drm, there is a new printf specifier added which should
  have all the correct acks/sobs:

   - printk fourcc modifier support added %p4cc

  Summary:

  core:
   - drm_crtc_commit_wait
   - atomic plane state helpers reworked for full state
   - dma-buf heaps API rework
   - edid: rework and improvements for displayid

  dp-mst:
   - better topology logging

  bridge:
   - Chipone ICN6211
   - Lontium LT8912B
   - anx7625 regulator support

  panel:
   - fix lt9611 4k panels handling

  simple-kms:
   - add plane state helpers

  ttm:
   - debugfs support
   - removal of unused sysfs
   - ignore signaled moved fences
   - ioremap buffer according to mem caching

  i915:
   - Alderlake S enablement
   - Conversion to dma_resv_locking
   - Bring back watchdog timeout support
   - legacy ioctl cleanups
   - add GEM TDDO and RFC process
   - DG1 LMEM preparation work
   - intel_display.c refactoring
   - Gen9/TGL PCH combination support
   - eDP MSO Support
   - multiple PSR instance support
   - Link training debug updates
   - Disable PSR2 support on JSL/EHL
   - DDR5/LPDDR5 support for bw calcs
   - LSPCON limited to gen9/10 platforms
   - HSW/BDW async flip/VTd corruption workaround
   - SAGV watermark fixes
   - SNB hard hang on ring resume fix
   - Limit imported dma-buf size
   - move to use new tasklet API
   - refactor KBL/TGL/ADL-S display/gt steppings
   - refactoring legacy DP/HDMI, FB plane code out

  amdgpu:
   - uapi: add ioctl to query video capabilities
   - Iniital AMD Freesync HDMI support
   - Initial Adebaran support
   - 10bpc dithering improvements
   - DCN secure display support
   - Drop legacy IO BAR requirements
   - PCIE/S0ix/RAS/Prime/Reset fixes
   - Display ASSR support
   - SMU gfx busy queues for RV/PCO
   - Initial LTTPR display work

  amdkfd:
   - MMU notifier fixes
   - APU fixes

  radeon:
   - debugfs cleanps
   - fw error handling ifix
   - Flexible array cleanups

  msm:
   - big DSI phy/pll cleanup
   - sc7280 initial support
   - commong bandwidth scaling path
   - shrinker locking contention fixes
   - unpin/swap support for GEM objcets

  ast:
   - cursor plane handling reworked

  tegra:
   - don't register DP AUX channels before connectors

  zynqmp:
   - fix OOB struct padding memset

  gma500:
   - drop ttm and medfield support

  exynos:
   - request_irq cleanup function

  mediatek:
   - fine tune line time for EOTp
   - MT8192 dpi support
   - atomic crtc config updates
   - don't support HDMI connector creation

  mxsdb:
   - imx8mm support

  panfrost:
   - MMU IRQ handling rework

  qxl:
   - locking fixes
   - resource deallocation changes

  sun4i:
   - add alpha properties to UI/VI layers

  vc4:
   - RPi4 CEC support

  vmwgfx:
   - doc cleanups

  arc:
   - moved to drm/tiny"

* tag 'drm-next-2021-04-28' of git://anongit.freedesktop.org/drm/drm: (1390 commits)
  drm/ttm: Don't count pages in SG BOs against pages_limit
  drm/ttm: fix return value check
  drm/bridge: lt8912b: fix incorrect handling of of_* return values
  drm: bridge: fix LONTIUM use of mipi_dsi_() functions
  drm: bridge: fix ANX7625 use of mipi_dsi_() functions
  drm/amdgpu: page retire over debugfs mechanism
  drm/radeon: Fix a missing check bug in radeon_dp_mst_detect()
  drm/amd/display: Fix the Wunused-function warning
  drm/radeon/r600: Fix variables that are not used after assignment
  drm/amdgpu/smu7: fix CAC setting on TOPAZ
  drm/amd/display: Update DCN302 SR Exit Latency
  drm/amdgpu: enable ras eeprom on aldebaran
  drm/amdgpu: RAS harvest on driver load
  drm/amdgpu: add ras aldebaran ras eeprom driver
  drm/amd/pm: increase time out value when sending msg to SMU
  drm/amdgpu: add DMUB outbox event IRQ source define/complete/debug flag
  drm/amd/pm: add the callback to get vbios bootup values for vangogh
  drm/radeon: Fix size overflow
  drm/amdgpu: Fix size overflow
  drm/amdgpu: move mmhub ras_func init to ip specific file
  ...

Pull media updates from Mauro Carvalho Chehab:

 - addition of a maintainer's profile for the media subsystem

 - addition of i.MX8 IP support

 - qcom/camss gained support for hardware version Titan 170

 - new RC keymaps

 - Lots of other improvements, cleanups and bug fixes

* tag 'media/v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (488 commits)
  media: coda: fix macroblocks count control usage
  media: rkisp1: params: fix wrong bits settings
  media: cedrus: Fix H265 status definitions
  media: meson-ge2d: fix rotation parameters
  media: v4l2-ctrls: fix reference to freed memory
  media: venus : hfi: add venus image info into smem
  media: venus: Fix internal buffer size calculations for v6.
  media: venus: helpers: keep max bandwidth when mbps exceeds the supported range
  media: venus: fix hw overload error log condition
  media: venus: core: correct firmware name for sm8250
  media: venus: core,pm: fix potential infinite loop
  media: venus: core: Fix kerneldoc warnings
  media: gscpa/stv06xx: fix memory leak
  media: cx25821: remove unused including <linux/version.h>
  media: staging: media/meson: remove redundant dev_err call
  media: adv7842: support 1 block EDIDs, fix clearing EDID
  media: adv7842: configure all pads
  media: allegro: change kernel-doc comment blocks to normal comments
  media: camss: ispif: Remove redundant dev_err call in msm_ispif_subdev_init()
  media: i2c: rdamc21: Fix warning on u8 cast
  ...

Pull security layer fixes from James Morris:
 "Miscellaneous minor fixes"

* tag 'fixes-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  security: commoncap: clean up kernel-doc comments
  security: commoncap: fix -Wstringop-overread warning

Merge tag 'linux-kselftest-kunit-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit updates from Shuah Khan:
 "Several fixes and a new feature to support failure from dynamic
  analysis tools such as UBSAN and fake ops for testing.

   - a fake ops struct for testing a "free" function to complain if it
     was called with an invalid argument, or caught a double-free. Most
     return void and have no normal means of signalling failure (e.g.
     super_operations, iommu_ops, etc.)"

* tag 'linux-kselftest-kunit-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  Documentation: kunit: add tips for using current->kunit_test
  kunit: fix -Wunused-function warning for __kunit_fail_current_test
  kunit: support failure from dynamic analysis tools
  kunit: tool: make --kunitconfig accept dirs, add lib/kunit fragment
  kunit: make KUNIT_EXPECT_STREQ() quote values, don't print literals
  kunit: Match parenthesis alignment to improve code readability

Merge tag 'linux-kselftest-next-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:

 - fixes and updates to resctrl test from Fenghua Yu and Reinette Chatre

 - fixes to Kselftest documentation, framework

 - minor spelling correction in timers test

* tag 'linux-kselftest-next-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
  selftests/resctrl: Change a few printed messages
  Documentation: kselftest: fix path to test module files
  selftests/resctrl: Create .gitignore to include resctrl_tests
  selftests/resctrl: Fix checking for < 0 for unsigned values
  selftests/resctrl: Fix incorrect parsing of iMC counters
  selftests/resctrl: Fix unmount resctrl FS
  selftests/resctrl: Skip the test if requested resctrl feature is not supported
  selftests/resctrl: Modularize resctrl test suite main() function
  selftests/resctrl: Don't hard code value of "no_of_bits" variable
  selftests/resctrl: Fix MBA/MBM results reporting format
  selftests/resctrl: Use resctrl/info for feature detection
  selftests/resctrl: Check for resctrl mount point only if resctrl FS is supported
  selftests/resctrl: Add config dependencies
  selftests/resctrl: Fix a printed message
  selftests/resctrl: Share show_cache_info() by CAT and CMT tests
  selftests/resctrl: Call kselftest APIs to log test results
  selftests/resctrl: Rename CQM test as CMT test
  selftests/resctrl: Fix missing options "-n" and "-p"
  selftests/resctrl: Ensure sibling CPU is not same as original CPU
  selftests/resctrl: Clean up resctrl features check
  ...

Pull cgroup changes from Tejun Heo:
 "The only notable change is Vipin's new misc cgroup controller.

  This implements generic support for resources which can be controlled
  by simply counting and limiting the number of resource instances - ie
  there's X number of these on the system and this cgroup subtree can
  have upto Y of those.

  The first user is the address space IDs used for virtual machine
  memory encryption and expected future usages are similar - niche
  hardware features with concrete resource limits and simple usage
  models"

* 'for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: use tsk->in_iowait instead of delayacct_is_task_waiting_on_io()
  cgroup/cpuset: fix typos in comments
  cgroup: misc: mark dummy misc_cg_res_total_usage() static inline
  svm/sev: Register SEV and SEV-ES ASIDs to the misc controller
  cgroup: Miscellaneous cgroup documentation.
  cgroup: Add misc cgroup controller

Merge tag 'livepatching-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching update from Petr Mladek:

 - Use TIF_NOTIFY_SIGNAL infrastructure instead of the fake signal

* tag 'livepatching-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  livepatch: Replace the fake signal sending with TIF_NOTIFY_SIGNAL infrastructure

Pull printk updates from Petr Mladek:

 - Stop synchronizing kernel log buffer readers by logbuf_lock. As a
   result, the access to the buffer is fully lockless now.

   Note that printk() itself still uses locks because it tries to flush
   the messages to the console immediately. Also the per-CPU temporary
   buffers are still there because they prevent infinite recursion and
   serialize backtraces from NMI. All this is going to change in the
   future.

 - kmsg_dump API rework and cleanup as a side effect of the logbuf_lock
   removal.

 - Make bstr_printf() aware that %pf and %pF formats could deference the
   given pointer.

 - Show also page flags by %pGp format.

 - Clarify the documentation for plain pointer printing.

 - Do not show no_hash_pointers warning multiple times.

 - Update Senozhatsky email address.

 - Some clean up.

* tag 'printk-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (24 commits)
  lib/vsprintf.c: remove leftover 'f' and 'F' cases from bstr_printf()
  printk: clarify the documentation for plain pointer printing
  kernel/printk.c: Fixed mundane typos
  printk: rename vprintk_func to vprintk
  vsprintf: dump full information of page flags in pGp
  mm, slub: don't combine pr_err with INFO
  mm, slub: use pGp to print page flags
  MAINTAINERS: update Senozhatsky email address
  lib/vsprintf: do not show no_hash_pointers message multiple times
  printk: console: remove unnecessary safe buffer usage
  printk: kmsg_dump: remove _nolock() variants
  printk: remove logbuf_lock
  printk: introduce a kmsg_dump iterator
  printk: kmsg_dumper: remove @active field
  printk: add syslog_lock
  printk: use atomic64_t for devkmsg_user.seq
  printk: use seqcount_latch for clear_seq
  printk: introduce CONSOLE_LOG_MAX
  printk: consolidate kmsg_dump_get_buffer/syslog_print_all code
  printk: refactor kmsg_dump_get_buffer()
  ...

Pull kgdb updates from Daniel Thompson:
 "Exclusively tidy ups this cycle. Most of them are thanks to Sumit Garg
  and, as it happens, the clean ups do result in a slight increase in
  the line count. This is due to registering kdb commands using data
  structures rather than function calls which, in turn, simplifies the
  memory management during command registration.

  In addition to changes to command registration we also have some dead
  code removal, a clearer implementation of environment variable
  handling and a typo fix"

* tag 'kgdb-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kdb: Refactor env variables get/set code
  kernel: debug: Ordinary typo fixes in the file gdbstub.c
  kdb: Simplify kdb commands registration
  kdb: Remove redundant function definitions/prototypes

Pull s390 updates from Heiko Carstens:

 - fix buffer size for in-kernel disassembler for ebpf programs.

 - fix two memory leaks in zcrypt driver.

 - expose PCI device UID as index, including an indicator if the uid is
   unique.

 - remove some oprofile leftovers.

 - improve stack unwinder tests.

 - don't use gcc atomic builtins anymore, just like all other
   architectures. Even though I'm sure the current code is ok, I totally
   dislike that s390 is the only architecture being special here;
   especially considering that there was a lengthly discussion about
   this topic and the outcome was not to use the builtins. Therefore
   open-code atomic ops again with inline assembly and switch to gcc
   builtins as soon as other architectures are doing.

 - couple of other changes to atomic and cmpxchg, and use
   atomic-instrumented.h for KASAN.

 - separate zbus creation, registration, and scanning in our PCI code
   which allows for cleaner and easier handling.

 - a rather large change to the vfio-ap code to fix circular locking
   dependencies when updating crypto masks.

 - move QAOB handling from qdio layer down to drivers.

 - add CRW inject facility to common I/O layer. This adds debugs files
   which allow to generate artificial events from user space for testing
   purposes.

 - increase SCLP console line length from 80 to 320 characters to avoid
   odd wrapped lines.

 - add protected virtualization guest and host indication files, which
   indicate either that a guest is running in pv mode or if the
   hypervisor is capable of starting pv guests.

 - various other small fixes and improvements all over the place.

* tag 's390-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (53 commits)
  s390/disassembler: increase ebpf disasm buffer size
  s390/archrandom: add parameter check for s390_arch_random_generate
  s390/zcrypt: fix zcard and zqueue hot-unplug memleak
  s390/pci: expose a PCI device's UID as its index
  s390/atomic,cmpxchg: always inline __xchg/__cmpxchg
  s390/smp: fix do_restart() prototype
  s390: get rid of oprofile leftovers
  s390/atomic,cmpxchg: make constraints work with old compilers
  s390/test_unwind: print test suite start/end info
  s390/cmpxchg: use unsigned long values instead of void pointers
  s390/test_unwind: add WARN if tests failed
  s390/test_unwind: unify error handling paths
  s390: update defconfigs
  s390/spinlock: use R constraint in inline assembly
  s390/atomic,cmpxchg: switch to use atomic-instrumented.h
  s390/cmpxchg: get rid of gcc atomic builtins
  s390/atomic: get rid of gcc atomic builtins
  s390/atomic: use proper constraints
  s390/atomic: move remaining inline assemblies to atomic_ops.h
  s390/bitops: make bitops only work on longs
  ...

Pull x86 updates from Borislav Petkov:

 - Turn the stack canary into a normal __percpu variable on 32-bit which
   gets rid of the LAZY_GS stuff and a lot of code.

 - Add an insn_decode() API which all users of the instruction decoder
   should preferrably use. Its goal is to keep the details of the
   instruction decoder away from its users and simplify and streamline
   how one decodes insns in the kernel. Convert its users to it.

 - kprobes improvements and fixes

 - Set the maximum DIE per package variable on Hygon

 - Rip out the dynamic NOP selection and simplify all the machinery
   around selecting NOPs. Use the simplified NOPs in objtool now too.

 - Add Xeon Sapphire Rapids to list of CPUs that support PPIN

 - Simplify the retpolines by folding the entire thing into an
   alternative now that objtool can handle alternatives with stack ops.
   Then, have objtool rewrite the call to the retpoline with the
   alternative which then will get patched at boot time.

 - Document Intel uarch per models in intel-family.h

 - Make Sub-NUMA Clustering topology the default and Cluster-on-Die the
   exception on Intel.

* tag 'x86_core_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  x86, sched: Treat Intel SNC topology as default, COD as exception
  x86/cpu: Comment Skylake server stepping too
  x86/cpu: Resort and comment Intel models
  objtool/x86: Rewrite retpoline thunk calls
  objtool: Skip magical retpoline .altinstr_replacement
  objtool: Cache instruction relocs
  objtool: Keep track of retpoline call sites
  objtool: Add elf_create_undef_symbol()
  objtool: Extract elf_symbol_add()
  objtool: Extract elf_strtab_concat()
  objtool: Create reloc sections implicitly
  objtool: Add elf_create_reloc() helper
  objtool: Rework the elf_rebuild_reloc_section() logic
  objtool: Fix static_call list generation
  objtool: Handle per arch retpoline naming
  objtool: Correctly handle retpoline thunk calls
  x86/retpoline: Simplify retpolines
  x86/alternatives: Optimize optimize_nops()
  x86: Add insn_decode_kernel()
  x86/kprobes: Move 'inline' to the beginning of the kprobe_is_ss() declaration
  ...

It seems like Fedora 34 ends up enabling a few new gcc warnings, notably
"-Wstringop-overread" and "-Warray-parameter".

Both of them cause what seem to be valid warnings in the kernel, where
we have array size mismatches in function arguments (that are no longer
just silently converted to a pointer to element, but actually checked).

This fixes most of the trivial ones, by making the function declaration
match the function definition, and in the case of intel_pm.c, removing
the over-specified array size from the argument declaration.

At least one 'stringop-overread' warning remains in the i915 driver, but
that one doesn't have the same obvious trivial fix, and may or may not
actually be indicative of a bug.

[ It was a mistake to upgrade one of my machines to Fedora 34 while
  being busy with the merge window, but if this is the extent of the
  compiler upgrade problems, things are better than usual    - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

 - Proper clk driver for Mediatek MT7621 SoCs

* clk-ralink:
  MAINTAINERS: add MT7621 CLOCK maintainer
  staging: mt7621-dts: use valid vendor 'mediatek' instead of invalid 'mtk'
  staging: mt7621-dts: make use of new 'mt7621-clk'
  clk: ralink: add clock driver for mt7621 SoC
  dt: bindings: add mt7621-sysc device tree binding documentation
  dt-bindings: clock: add dt binding header for mt7621 clocks

Merge branches 'clk-imx', 'clk-samsung', 'clk-zynq', 'clk-rockchip' and 'clk-uniphier' into clk-next

 - Simplify Zynq Kconfig dependencies

* clk-imx:
  clk: imx: Reference preceded by free
  clk: imx8mq: Correct the pcie1 sels
  clk: imx8mp: Remove the none exist pcie clocks
  clk: imx: Fix reparenting of UARTs not associated with stdout

* clk-samsung:
  clk: samsung: Remove redundant dev_err calls
  clk: exynos7: Mark aclk_fsys1_200 as critical

* clk-zynq:
  clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable
  clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback
  clk: zynqmp: Drop dependency on ARCH_ZYNQMP
  clk: zynqmp: Enable the driver if ZYNQMP_FIRMWARE is selected

* clk-rockchip:
  clk: rockchip: drop MODULE_ALIAS from rk3399 clock controller
  clk: rockchip: drop parenthesis from ARM || COMPILE_TEST depends
  clk: rockchip: add clock controller for rk3568
  clk: rockchip: support more core div setting
  dt-binding: clock: Document rockchip, rk3568-cru bindings
  clk: rockchip: add dt-binding header for rk3568

* clk-uniphier:
  clk: uniphier: Fix potential infinite loop