- 25 Oct, 2007 30 commits
-
-
Oliver Neukum authored
the disconnect method of this driver set intfdata to NULL before removing attribute files. The attributes' read methods will happily follow the NULL pointer. Here's the correct ordering. Signed-off-by : Oliver Neukum <oneukum@suse.de> Signed-off-by:Greg Kroah-Hartman <gregkh@suse.de>
-
Oliver Neukum authored
Pete caused me to lock at buggy drivers in this respect. The idmouse has a race between open and disconnect. This patch - solves the open/disconnect race - switches locking to mutexes Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Alan Stern authored
This patch (as1005) fixes a rather subtle problem. When usb_set_configuration() registers the interfaces and their files in sysfs, it doesn't expect those files to exist already. But when an interface is registered, its driver may call usb_set_interface() and thereby cause the sysfs files to be created. The result is an error when usb_set_configuration() goes on to create those same files again. The (not-so-great) solution is to have usb_set_configuration() remove any existing files before creating them. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Ingo Molnar authored
fix ssb_ohci_probe() build bug: drivers/built-in.o: In function `ssb_ohci_probe': ohci-hcd.c:(.text+0xbff39): undefined reference to `ssb_device_enable' ohci-hcd.c:(.text+0xbff6f): undefined reference to `ssb_admatch_base' ohci-hcd.c:(.text+0xbff8b): undefined reference to `ssb_admatch_size' ohci-hcd.c:(.text+0xbffe5): undefined reference to `ssb_device_disable' [...] the reason was that this Kconfig combination was allowed: CONFIG_SSB=m CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_SSB=y the fix is to require a modular USB_OHCI_HCD build when SSB is modular. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Acked-by:
Michael Buesch <mb@bu3sch.de> Signed-off-by:
-
Alan Cox authored
Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Adrian Bunk authored
The Coverity checker spotted that we have already oops'ed if "dev" was NULL in these places. Since "dev" being NULL isn't possible at these places this patch removes the NULL checks. Additionally, I've fixed the formatting of the if's. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Acked-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
-
Adrian Bunk authored
The Coverity checker spotted that we have already oops'ed if "dev" was NULL. Since "dev" being NULL doesn't seem to be possible here this patch removes the NULL check. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
-
Oliver Neukum authored
URB_FREE_BUFFER needs to be allowed in the sanity checks to use drivers that use that flag. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable <stable@kernel.org> Signed-off-by:
-
Alan Cox authored
The ISD200 driver imports a single trivial routine from the IDE layer and in doing so creates a mess of dependancies that drag in the entire old IDE layer. Even more sad - it does this for a routine which is usually (little endian) a null function! - Copy the function into ISD200 - Rename it so it doesn't clash with the ide header prototype - Remove all the depend constraints Signed-off-by:
-
Matthias Kaehlcke authored
FTDI Elan driver: Convert the semaphore ftdi->u132_lock to the mutex API Signed-off-by:
Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by:
-
Alan Stern authored
This patch (as1003) changes uhci-hcd to treat the URB_ISO_ASAP flag the same as other host controller drivers, namely, to schedule an Iso URB for the first available time slot that hasn't already expired. URBs in which the flag isn't set will be scheduled for the first slot following the last URB, even if it has expired. This fixes a problem reported by Martin Bachem. Signed-off-by:
-
Alan Cox authored
Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andrew Morton authored
WARNING: line over 80 characters #23: FILE: drivers/usb/serial/ftdi_sio.c:297: + speed_t force_baud; /* if non-zero, force the baud rate to this value */ ERROR: use tabs not spaces #31: FILE: drivers/usb/serial/ftdi_sio.c:881: +^I$ ERROR: use tabs not spaces #39: FILE: drivers/usb/serial/ftdi_sio.c:890: +^I$ WARNING: line over 80 characters #111: FILE: drivers/usb/serial/ftdi_sio.c:1956: + tty_encode_baud_rate(port->tty, priv->force_baud, priv->force_baud); Your patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS. Signed-off-by:
-
Alan Cox authored
- Remove can't happen tests - Rework speed validation in terms of baud rates not CBAUD bits - Report speed set (or chosen) - Minor termios correctness Signed-off-by:
-
Alan Cox authored
- Convert to new baud rate functions - Add baud rate reporting Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Alan Cox authored
No hardware termios setting in this case so keep the old settings Signed-off-by:
-
Alan Cox authored
For the devices that have no hardware settings set up the termios return properly. Signed-off-by:
-
Alan Cox authored
- Clear unsupported CMSPAR - Encode resulting speeds Signed-off-by:
-
Alan Cox authored
- Clear unsupported CMSPAR bit - Clean up long chains of a->b-> a bit - Encode baud rate back into tty structure properly Signed-off-by:
-
Alan Cox authored
- Clean up paranoia checks - Propogate back a correct fixed termios Signed-off-by:
-
Alan Cox authored
The empeg is pretty fixed. Tidy up the long foo->bar->baz stuff and encode the fixed speed properly. Signed-off-by:
-
Alan Cox authored
- Expand some x&y to x & y so I could read it when checking - Clear CMSPAR bit in the termios (as the driver does not support it) - Encode the speed using the new tty_encode_baud_rate facility Signed-off-by:
-
Alan Cox authored
The ch341 currently doesn't support most of the hardware setting. So to keep the termios data right we propogate the old termios hardware values back then encode the speed. Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Alan Cox authored
- Set the i/ospeed in the initial termios properly - Use the tty_encode_baud_rate functions to report resulting rates properly Signed-off-by:
-
Alan Cox authored
Earlier patches have removed the checking for old v new differences from the USB drivers so we can now pass in a valid blank old termios so that we don't to fill the drivers with magic hacks for console support Signed-off-by:
-
Greg Kroah-Hartman authored
This adds support for the U727 and MC950 devices. Cc: Rony Sarkis <rsarkis@nvtl.com> Signed-off-by:
-
- 24 Oct, 2007 10 commits
-
-
Linus Torvalds authored
The patch is big. Really big. You just won't believe how vastly hugely mindbogglingly big it is. I mean you may think it's a long way down the road to the chemist, but that's just peanuts to how big the patch from 2.6.23 is. But it's all good. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Add a port type definition for the Freescale UART driver ports (mcf.c). Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
Greg Ungerer authored
Remove old definitions of the timer function pointers. Add definitions of the common hardware timer functions. Signed-off-by:
-
Greg Ungerer authored
Create definition for DMA channels on the ColdFire 532x family. Signed-off-by:
-
Greg Ungerer authored
Add platform support structure for use with new ColdFire UART driver. Signed-off-by:
-
Greg Ungerer authored
Mark the m68knommu memory init functions as __init. Signed-off-by:
-
Greg Ungerer authored
Mark the m68knommu setup_arch() function as __init. Signed-off-by:
-
Greg Ungerer authored
Removed header includes not needed. Remove use of old m68knommu timer function pointers. Signed-off-by:
-
Greg Ungerer authored
Clean up 68EZ328 timer support code. Removed header includes not needed. Remove use of old m68knommu timer function pointers. Signed-off-by:
-
Greg Ungerer authored
Clean up 68360 timer support code. Removed header includes not needed. Remove use of old m68knommu timer function pointers. Use common function naming for 68328 timer functions. Signed-off-by:
-
