- 14 Jun, 2021 1 commit
-
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code and remove error message which within devm_platform_get_and_ioremap_resource() already. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210605120205.2459578-1-yangyingliang@huawei.com
-
- 12 Jun, 2021 2 commits
-
-
Yang Yingliang authored
Fix the following make W=1 kernel build warning: drivers/thermal/thermal_core.c:1376: warning: expecting prototype for thermal_device_unregister(). Prototype was for thermal_zone_device_unregister() instead Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210517051020.3463536-1-yangyingliang@huawei.com
-
Rajeshwari Ravindra Kamble authored
Adding compatible string in TSENS dt-bindings for SC7280. Signed-off-by: Rajeshwari Ravindra Kamble <rkambl@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1620367641-23383-2-git-send-email-rkambl@codeaurora.org
-
- 11 Jun, 2021 4 commits
-
-
Srinivas Pandruvada authored
Export additional attributes: ddr_data_rate (RO) : Show current DDR (Double Data Rate) data rate. rfi_restriction (RW) : Show or set current state for RFI (Radio Frequency Interference) protection. These attributes use mailbox commands to get/set information. Here command codes are: 0x0007: Read RFI restriction 0x0107: Read DDR data rate 0x0008: Write RFI restriction Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210517061441.1921901-3-srinivas.pandruvada@linux.intel.com
-
Srinivas Pandruvada authored
Export the mailbox interface to be used by other modules. Also change command id and response from u8 to u32 data type. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210517061441.1921901-2-srinivas.pandruvada@linux.intel.com
-
Chunyan Zhang authored
MODULE_DEVICE_TABLE is used to extract the device information out of the driver and builds a table when being compiled. If using this macro, kernel can find the driver if available when the device is plugged in, and then loads that driver and initializes the device. Fixes: 554fdbaf ("thermal: sprd: Add Spreadtrum thermal driver support") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210512093752.243168-1-zhang.lyra@gmail.com
-
Finley Xiao authored
The RK3568 SoCs have two Temperature Sensors, channel 0 is for CPU, channel 1 is for GPU. Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210506175514.168365-5-ezequiel@collabora.com
-
- 06 Jun, 2021 11 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Five small and fairly minor fixes, all in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_devinfo: Add blacklist entry for HPE OPEN-V scsi: ufs: ufs-mediatek: Fix HCI version in some platforms scsi: qedf: Do not put host in qedf_vport_create() unconditionally scsi: lpfc: Fix failure to transmit ABTS on FC link scsi: target: core: Fix warning on realtime kernels
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Miscellaneous ext4 bug fixes" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Only advertise encrypted_casefold when encryption and unicode are enabled ext4: fix no-key deletion for encrypt+casefold ext4: fix memory leak in ext4_fill_super ext4: fix fast commit alignment issues ext4: fix bug on in ext4_es_cache_extent as ext4_split_extent_at failed ext4: fix accessing uninit percpu counter variable with fast_commit ext4: fix memory leak in ext4_mb_init_backend on error path.
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A set of fixes that have been coming in over the last few weeks, the usual mix of fixes: - DT fixups for TI K3 - SATA drive detection fix for TI DRA7 - Power management fixes and a few build warning removals for OMAP - OP-TEE fix to use standard API for UUID exporting - DT fixes for a handful of i.MX boards And a few other smaller items" * tag 'arm-soc-fixes-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) arm64: meson: select COMMON_CLK soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe() ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells ARM: dts: imx7d-pico: Fix the 'tuning-step' property ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage ARM: imx: pm-imx27: Include "common.h" arm64: dts: zii-ultra: fix 12V_MAIN voltage arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance arm64: dts: ls1028a: fix memory node bus: ti-sysc: Fix am335x resume hang for usb otg module ARM: OMAP2+: Fix build warning when mmc_omap is not built ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function ARM: OMAP1: Fix use of possibly uninitialized irq variable optee: use export_uuid() to copy client UUID arm64: dts: ti: k3*: Introduce reg definition for interrupt routers arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Fix our KVM reverse map real-mode handling since we enabled huge vmalloc (in some configurations). Revert a recent change to our IOMMU code which broke some devices. Fix KVM handling of FSCR on P7/P8, which could have possibly let a guest crash it's Qemu. Fix kprobes validation of prefixed instructions across page boundary. Thanks to Alexey Kardashevskiy, Christophe Leroy, Fabiano Rosas, Frederic Barrat, Naveen N. Rao, and Nicholas Piggin" * tag 'powerpc-5.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: Revert "powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs" KVM: PPC: Book3S HV: Save host FSCR in the P7/8 path powerpc: Fix reverse map real-mode address lookup with huge vmalloc powerpc/kprobes: Fix validation of prefixed instructions across page boundary
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: "A bunch of x86/urgent stuff accumulated for the last two weeks so lemme unload it to you. It should be all totally risk-free, of course. :-) - Fix out-of-spec hardware (1st gen Hygon) which does not implement MSR_AMD64_SEV even though the spec clearly states so, and check CPUID bits first. - Send only one signal to a task when it is a SEGV_PKUERR si_code type. - Do away with all the wankery of reserving X amount of memory in the first megabyte to prevent BIOS corrupting it and simply and unconditionally reserve the whole first megabyte. - Make alternatives NOP optimization work at an arbitrary position within the patched sequence because the compiler can put single-byte NOPs for alignment anywhere in the sequence (32-bit retpoline), vs our previous assumption that the NOPs are only appended. - Force-disable ENQCMD[S] instructions support and remove update_pasid() because of insufficient protection against FPU state modification in an interrupt context, among other xstate horrors which are being addressed at the moment. This one limits the fallout until proper enablement. - Use cpu_feature_enabled() in the idxd driver so that it can be build-time disabled through the defines in disabled-features.h. - Fix LVT thermal setup for SMI delivery mode by making sure the APIC LVT value is read before APIC initialization so that softlockups during boot do not happen at least on one machine. - Mark all legacy interrupts as legacy vectors when the IO-APIC is disabled and when all legacy interrupts are routed through the PIC" * tag 'x86_urgent_for_v5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev: Check SME/SEV support in CPUID first x86/fault: Don't send SIGSEGV twice on SEGV_PKUERR x86/setup: Always reserve the first 1M of RAM x86/alternative: Optimize single-byte NOPs at an arbitrary position x86/cpufeatures: Force disable X86_FEATURE_ENQCMD and remove update_pasid() dmaengine: idxd: Use cpu_feature_enabled() x86/thermal: Fix LVT thermal setup for SMI delivery mode x86/apic: Mark _all_ legacy interrupts when IO/APIC is missing
-
Daniel Rosenberg authored
Encrypted casefolding is only supported when both encryption and casefolding are both enabled in the config. Fixes: 471fbbea ("ext4: handle casefolding with encryption") Cc: stable@vger.kernel.org # 5.13+ Signed-off-by: Daniel Rosenberg <drosen@google.com> Link: https://lore.kernel.org/r/20210603094849.314342-1-drosen@google.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Daniel Rosenberg authored
commit 471fbbea ("ext4: handle casefolding with encryption") is missing a few checks for the encryption key which are needed to support deleting enrypted casefolded files when the key is not present. This bug made it impossible to delete encrypted+casefolded directories without the encryption key, due to errors like: W : EXT4-fs warning (device vdc): __ext4fs_dirhash:270: inode #49202: comm Binder:378_4: Siphash requires key Repro steps in kvm-xfstests test appliance: mkfs.ext4 -F -E encoding=utf8 -O encrypt /dev/vdc mount /vdc mkdir /vdc/dir chattr +F /vdc/dir keyid=$(head -c 64 /dev/zero | xfs_io -c add_enckey /vdc | awk '{print $NF}') xfs_io -c "set_encpolicy $keyid" /vdc/dir for i in `seq 1 100`; do mkdir /vdc/dir/$i done xfs_io -c "rm_enckey $keyid" /vdc rm -rf /vdc/dir # fails with the bug Fixes: 471fbbea ("ext4: handle casefolding with encryption") Signed-off-by: Daniel Rosenberg <drosen@google.com> Link: https://lore.kernel.org/r/20210522004132.2142563-1-drosen@google.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Alexey Makhalov authored
Buffer head references must be released before calling kill_bdev(); otherwise the buffer head (and its page referenced by b_data) will not be freed by kill_bdev, and subsequently that bh will be leaked. If blocksizes differ, sb_set_blocksize() will kill current buffers and page cache by using kill_bdev(). And then super block will be reread again but using correct blocksize this time. sb_set_blocksize() didn't fully free superblock page and buffer head, and being busy, they were not freed and instead leaked. This can easily be reproduced by calling an infinite loop of: systemctl start <ext4_on_lvm>.mount, and systemctl stop <ext4_on_lvm>.mount ... since systemd creates a cgroup for each slice which it mounts, and the bh leak get amplified by a dying memory cgroup that also never gets freed, and memory consumption is much more easily noticed. Fixes: ce40733c ("ext4: Check for return value from sb_set_blocksize") Fixes: ac27a0ec ("ext4: initial copy of files from ext3") Link: https://lore.kernel.org/r/20210521075533.95732-1-amakhalov@vmware.comSigned-off-by: Alexey Makhalov <amakhalov@vmware.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
-
Harshad Shirwadkar authored
Fast commit recovery data on disk may not be aligned. So, when the recovery code reads it, this patch makes sure that fast commit info found on-disk is first memcpy-ed into an aligned variable before accessing it. As a consequence of it, we also remove some macros that could resulted in unaligned accesses. Cc: stable@kernel.org Fixes: 8016e29f ("ext4: fast commit recovery path") Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20210519215920.2037527-1-harshads@google.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
Ye Bin authored
We got follow bug_on when run fsstress with injecting IO fault: [130747.323114] kernel BUG at fs/ext4/extents_status.c:762! [130747.323117] Internal error: Oops - BUG: 0 [#1] SMP ...... [130747.334329] Call trace: [130747.334553] ext4_es_cache_extent+0x150/0x168 [ext4] [130747.334975] ext4_cache_extents+0x64/0xe8 [ext4] [130747.335368] ext4_find_extent+0x300/0x330 [ext4] [130747.335759] ext4_ext_map_blocks+0x74/0x1178 [ext4] [130747.336179] ext4_map_blocks+0x2f4/0x5f0 [ext4] [130747.336567] ext4_mpage_readpages+0x4a8/0x7a8 [ext4] [130747.336995] ext4_readpage+0x54/0x100 [ext4] [130747.337359] generic_file_buffered_read+0x410/0xae8 [130747.337767] generic_file_read_iter+0x114/0x190 [130747.338152] ext4_file_read_iter+0x5c/0x140 [ext4] [130747.338556] __vfs_read+0x11c/0x188 [130747.338851] vfs_read+0x94/0x150 [130747.339110] ksys_read+0x74/0xf0 This patch's modification is according to Jan Kara's suggestion in: https://patchwork.ozlabs.org/project/linux-ext4/patch/20210428085158.3728201-1-yebin10@huawei.com/ "I see. Now I understand your patch. Honestly, seeing how fragile is trying to fix extent tree after split has failed in the middle, I would probably go even further and make sure we fix the tree properly in case of ENOSPC and EDQUOT (those are easily user triggerable). Anything else indicates a HW problem or fs corruption so I'd rather leave the extent tree as is and don't try to fix it (which also means we will not create overlapping extents)." Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210506141042.3298679-1-yebin10@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
-
- 05 Jun, 2021 22 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Some more bugfixes from I2C for v5.13. Usual stuff" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: qcom-geni: Suspend and resume the bus during SYSTEM_SLEEP_PM ops i2c: qcom-geni: Add shutdown callback for i2c i2c: tegra-bpmp: Demote kernel-doc abuses i2c: altera: Fix formatting issue in struct and demote unworthy kernel-doc headers
-
Olof Johansson authored
Merge tag 'ti-k3-dt-fixes-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/fixes Devicetree fixes for TI K3 platforms for v5.13 merge window: These minor fixes include: * Fixups for device tree discovered during yaml conversion * Fixups for missing dma-coherent property in j7200 * Removal of camera sensor node from am65 evm dts to overlay as camera sensor boards are variable. * tag 'ti-k3-dt-fixes-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: arm64: dts: ti: k3*: Introduce reg definition for interrupt routers arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges arm64: dts: ti: k3-*: Rename the TI-SCI node arm64: dts: ti: k3-am65-wakeup: Drop un-necessary properties from dmsc node arm64: dts: ti: k3-am65-wakeup: Add debug region to TI-SCI node arm64: dts: ti: k3-*: Rename the TI-SCI clocks node name arm64: dts: ti: j7200-main: Mark Main NAVSS as dma-coherent arm64: dts: ti: k3-am654-base-board: remove ov5640 Link: https://lore.kernel.org/r/20210518115634.467vgpbzplal5kou@obituarySigned-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'optee-fix-for-v5.13' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes OP-TEE use export_uuid() to copy UUID * tag 'optee-fix-for-v5.13' of git://git.linaro.org/people/jens.wiklander/linux-tee: optee: use export_uuid() to copy client UUID Link: https://lore.kernel.org/r/20210518100712.GA449561@jadeSigned-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'omap-for-v5.13/fixes-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes PM and build warning fixes for omaps While chasing system suspend related regressions, I noticed few other issues related to PM would be good to have fixed: - UART idling does not always work for hardware autoidle features - am335x resume works only the first time unless musb module is loaded Then there are three patches for omap1 related warnings caused by the gpio changes, and one build warning fix for legacy mmc platform code when mmc is built as a loadable module. These can all be merged whenever suitable naturally. I've sent the more urgent SATA regression fix separately although it appears in this pull request too because of the branches merged. * tag 'omap-for-v5.13/fixes-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act bus: ti-sysc: Fix am335x resume hang for usb otg module ARM: OMAP2+: Fix build warning when mmc_omap is not built ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function ARM: OMAP1: Fix use of possibly uninitialized irq variable Link: https://lore.kernel.org/r/pull-1622614772-543196@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'omap-for-v5.13/fixes-sata' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Regression fix for TI dra7 SATA not detecting drives The SATA quirk flags are no missing With recent removal of legacy platform data and we need to add the quirk flags to detect drives. * tag 'omap-for-v5.13/fixes-sata' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix missing quirk flags for sata Link: https://lore.kernel.org/r/pull-1622613578-121536@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'amlogic-fixes-v5.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes Amlogic fixes for v5.13-rc1 - arm64: meson: select COMMON_CLK to select a proper implementation of the clock API - soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe() * tag 'amlogic-fixes-v5.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: meson: select COMMON_CLK soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe() Link: https://lore.kernel.org/r/73e76706-f3f4-bebf-10dd-d2ec9106a234@baylibre.comSigned-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'imx-fixes-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.13: - Fix missing-prototypes warning of 'imx27_pm_init' in i.MX27 platform pm code. - A couple of patches from Fabio Estevam to fix 'tuning-step' property in imx7d-meerkat96 and imx7d-pico DT. - Fix '#gpio-cells' of nxp,pca8574 device in imx6qdl-emcon-avari DT. - A couple of patches from Lucas Stach to fix regulator and voltage for imx8mq-zii-ultra board. - Add missing regulators for imx6q-dhcom to avoid possible instability issues. - Fix memory-controller settings for fsl-ls1028a DT. - Fix RGMII clock and voltage for a couple of fsl-ls1028a-kontron-sl28 boards. - Fix RGMII connection to QCA8334 switch for imx6dl-yapp4 board. * tag 'imx-fixes-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells ARM: dts: imx7d-pico: Fix the 'tuning-step' property ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage ARM: imx: pm-imx27: Include "common.h" arm64: dts: zii-ultra: fix 12V_MAIN voltage arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance arm64: dts: ls1028a: fix memory node ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch Link: https://lore.kernel.org/r/20210527011758.GD8194@dragonSigned-off-by: Olof Johansson <olof@lixom.net>
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "13 patches. Subsystems affected by this patch series: mips, mm (kfence, debug, pagealloc, memory-hotplug, hugetlb, kasan, and hugetlb), init, proc, lib, ocfs2, and mailmap" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mailmap: use private address for Michel Lespinasse ocfs2: fix data corruption by fallocate lib: crc64: fix kernel-doc warning mm, hugetlb: fix simple resv_huge_pages underflow on UFFDIO_COPY mm/kasan/init.c: fix doc warning proc: add .gitignore for proc-subset-pid selftest hugetlb: pass head page to remove_hugetlb_page() drivers/base/memory: fix trying offlining memory blocks with memory holes on aarch64 mm/page_alloc: fix counting of free pages after take off from buddy mm/debug_vm_pgtable: fix alignment for pmd/pud_advanced_tests() pid: take a reference when initializing `cad_pid` kfence: use TASK_IDLE when awaiting allocation Revert "MIPS: make userspace mapping young by default"
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - Build with '-mno-relax' when using LLVM's linker, which doesn't support linker relaxation. - A fix to build without SiFive's errata. - A fix to use PAs during init_resources() - A fix to avoid W+X mappings during boot. * tag 'riscv-for-linus-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Fix memblock_free() usages in init_resources() riscv: skip errata_cip_453.o if CONFIG_ERRATA_SIFIVE_CIP_453 is disabled riscv: mm: Fix W+X mappings at boot riscv: Use -mno-relax when using lld linker
-
Michel Lespinasse authored
Link: https://lkml.kernel.org/r/20210602221225.49446-1-michel@lespinasse.orgSigned-off-by: Michel Lespinasse <michel@lespinasse.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Junxiao Bi authored
When fallocate punches holes out of inode size, if original isize is in the middle of last cluster, then the part from isize to the end of the cluster will be zeroed with buffer write, at that time isize is not yet updated to match the new size, if writeback is kicked in, it will invoke ocfs2_writepage()->block_write_full_page() where the pages out of inode size will be dropped. That will cause file corruption. Fix this by zero out eof blocks when extending the inode size. Running the following command with qemu-image 4.2.1 can get a corrupted coverted image file easily. qemu-img convert -p -t none -T none -f qcow2 $qcow_image \ -O qcow2 -o compat=1.1 $qcow_image.conv The usage of fallocate in qemu is like this, it first punches holes out of inode size, then extend the inode size. fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2276196352, 65536) = 0 fallocate(11, 0, 2276196352, 65536) = 0 v1: https://www.spinics.net/lists/linux-fsdevel/msg193999.html v2: https://lore.kernel.org/linux-fsdevel/20210525093034.GB4112@quack2.suse.cz/T/ Link: https://lkml.kernel.org/r/20210528210648.9124-1-junxiao.bi@oracle.comSigned-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
YueHaibing authored
Fix W=1 kernel build warning: lib/crc64.c:40: warning: bad line: or the previous crc64 value if computing incrementally. Link: https://lkml.kernel.org/r/20210601135851.15444-1-yuehaibing@huawei.comSigned-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Coly Li <colyli@suse.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mina Almasry authored
The userfaultfd hugetlb tests cause a resv_huge_pages underflow. This happens when hugetlb_mcopy_atomic_pte() is called with !is_continue on an index for which we already have a page in the cache. When this happens, we allocate a second page, double consuming the reservation, and then fail to insert the page into the cache and return -EEXIST. To fix this, we first check if there is a page in the cache which already consumed the reservation, and return -EEXIST immediately if so. There is still a rare condition where we fail to copy the page contents AND race with a call for hugetlb_no_page() for this index and again we will underflow resv_huge_pages. That is fixed in a more complicated patch not targeted for -stable. Test: Hacked the code locally such that resv_huge_pages underflows produce a warning, then: ./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10 2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success ./tools/testing/selftests/vm/userfaultfd hugetlb 10 2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success Both tests succeed and produce no warnings. After the test runs number of free/resv hugepages is correct. [mike.kravetz@oracle.com: changelog fixes] Link: https://lkml.kernel.org/r/20210528004649.85298-1-almasrymina@google.com Fixes: 8fb5debc ("userfaultfd: hugetlbfs: add hugetlb_mcopy_atomic_pte for userfaultfd support") Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yu Kuai authored
Fix gcc W=1 warning: mm/kasan/init.c:228: warning: Function parameter or member 'shadow_start' not described in 'kasan_populate_early_shadow' mm/kasan/init.c:228: warning: Function parameter or member 'shadow_end' not described in 'kasan_populate_early_shadow' Link: https://lkml.kernel.org/r/20210603140700.3045298-1-yukuai3@huawei.comSigned-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Matlack authored
This new selftest needs an entry in the .gitignore file otherwise git will try to track the binary. Link: https://lkml.kernel.org/r/20210601164305.11776-1-dmatlack@google.com Fixes: 268af17a ("selftests: proc: test subset=pid") Signed-off-by: David Matlack <dmatlack@google.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Naoya Horiguchi authored
When memory_failure() or soft_offline_page() is called on a tail page of some hugetlb page, "BUG: unable to handle page fault" error can be triggered. remove_hugetlb_page() dereferences page->lru, so it's assumed that the page points to a head page, but one of the caller, dissolve_free_huge_page(), provides remove_hugetlb_page() with 'page' which could be a tail page. So pass 'head' to it, instead. Link: https://lkml.kernel.org/r/20210526235257.2769473-1-nao.horiguchi@gmail.com Fixes: 6eb4e88a ("hugetlb: create remove_hugetlb_page() to separate functionality") Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Hildenbrand authored
offline_pages() properly checks for memory holes and bails out. However, we do a page_zone(pfn_to_page(start_pfn)) before calling offline_pages() when offlining a memory block. We should not unconditionally call page_zone(pfn_to_page(start_pfn)) on aarch64 in offlining code, otherwise we can trigger a BUG when hitting a memory hole: kernel BUG at include/linux/mm.h:1383! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: loop processor efivarfs ip_tables x_tables ext4 mbcache jbd2 dm_mod igb nvme i2c_algo_bit mlx5_core i2c_core nvme_core firmware_class CPU: 13 PID: 1694 Comm: ranbug Not tainted 5.12.0-next-20210524+ #4 Hardware name: MiTAC RAPTOR EV-883832-X3-0001/RAPTOR, BIOS 1.6 06/28/2020 pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) pc : memory_subsys_offline+0x1f8/0x250 lr : memory_subsys_offline+0x1f8/0x250 Call trace: memory_subsys_offline+0x1f8/0x250 device_offline+0x154/0x1d8 online_store+0xa4/0x118 dev_attr_store+0x44/0x78 sysfs_kf_write+0xe8/0x138 kernfs_fop_write_iter+0x26c/0x3d0 new_sync_write+0x2bc/0x4f8 vfs_write+0x718/0xc88 ksys_write+0xf8/0x1e0 __arm64_sys_write+0x74/0xa8 invoke_syscall.constprop.0+0x78/0x1e8 do_el0_svc+0xe4/0x298 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb8 el0_sync+0x178/0x180 Kernel panic - not syncing: Oops - BUG: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x00000251,20000846 Memory Limit: none If nr_vmemmap_pages is set, we know that we are dealing with hotplugged memory that doesn't have any holes. So call page_zone(pfn_to_page(start_pfn)) only when really necessary -- when nr_vmemmap_pages is set and we actually adjust the present pages. Link: https://lkml.kernel.org/r/20210526075226.5572-1-david@redhat.com Fixes: a08a2ae3 ("mm,memory_hotplug: allocate memmap from the added memory range") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Qian Cai (QUIC) <quic_qiancai@quicinc.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Mike Rapoport <rppt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ding Hui authored
Recently we found that there is a lot MemFree left in /proc/meminfo after do a lot of pages soft offline, it's not quite correct. Before Oscar's rework of soft offline for free pages [1], if we soft offline free pages, these pages are left in buddy with HWPoison flag, and NR_FREE_PAGES is not updated immediately. So the difference between NR_FREE_PAGES and real number of available free pages is also even big at the beginning. However, with the workload running, when we catch HWPoison page in any alloc functions subsequently, we will remove it from buddy, meanwhile update the NR_FREE_PAGES and try again, so the NR_FREE_PAGES will get more and more closer to the real number of available free pages. (regardless of unpoison_memory()) Now, for offline free pages, after a successful call take_page_off_buddy(), the page is no longer belong to buddy allocator, and will not be used any more, but we missed accounting NR_FREE_PAGES in this situation, and there is no chance to be updated later. Do update in take_page_off_buddy() like rmqueue() does, but avoid double counting if some one already set_migratetype_isolate() on the page. [1]: commit 06be6ff3 ("mm,hwpoison: rework soft offline for free pages") Link: https://lkml.kernel.org/r/20210526075247.11130-1-dinghui@sangfor.com.cn Fixes: 06be6ff3 ("mm,hwpoison: rework soft offline for free pages") Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Suggested-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Gerald Schaefer authored
In pmd/pud_advanced_tests(), the vaddr is aligned up to the next pmd/pud entry, and so it does not match the given pmdp/pudp and (aligned down) pfn any more. For s390, this results in memory corruption, because the IDTE instruction used e.g. in xxx_get_and_clear() will take the vaddr for some calculations, in combination with the given pmdp. It will then end up with a wrong table origin, ending on ...ff8, and some of those wrongly set low-order bits will also select a wrong pagetable level for the index addition. IDTE could therefore invalidate (or 0x20) something outside of the page tables, depending on the wrongly picked index, which in turn depends on the random vaddr. As result, we sometimes see "BUG task_struct (Not tainted): Padding overwritten" on s390, where one 0x5a padding value got overwritten with 0x7a. Fix this by aligning down, similar to how the pmd/pud_aligned pfns are calculated. Link: https://lkml.kernel.org/r/20210525130043.186290-2-gerald.schaefer@linux.ibm.com Fixes: a5c3b9ff ("mm/debug_vm_pgtable: add tests validating advanced arch page table helpers") Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: <stable@vger.kernel.org> [5.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mark Rutland authored
During boot, kernel_init_freeable() initializes `cad_pid` to the init task's struct pid. Later on, we may change `cad_pid` via a sysctl, and when this happens proc_do_cad_pid() will increment the refcount on the new pid via get_pid(), and will decrement the refcount on the old pid via put_pid(). As we never called get_pid() when we initialized `cad_pid`, we decrement a reference we never incremented, can therefore free the init task's struct pid early. As there can be dangling references to the struct pid, we can later encounter a use-after-free (e.g. when delivering signals). This was spotted when fuzzing v5.13-rc3 with Syzkaller, but seems to have been around since the conversion of `cad_pid` to struct pid in commit 9ec52099 ("[PATCH] replace cad_pid by a struct pid") from the pre-KASAN stone age of v2.6.19. Fix this by getting a reference to the init task's struct pid when we assign it to `cad_pid`. Full KASAN splat below. ================================================================== BUG: KASAN: use-after-free in ns_of_pid include/linux/pid.h:153 [inline] BUG: KASAN: use-after-free in task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509 Read of size 4 at addr ffff23794dda0004 by task syz-executor.0/273 CPU: 1 PID: 273 Comm: syz-executor.0 Not tainted 5.12.0-00001-g9aef892b2d15 #1 Hardware name: linux,dummy-virt (DT) Call trace: ns_of_pid include/linux/pid.h:153 [inline] task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509 do_notify_parent+0x308/0xe60 kernel/signal.c:1950 exit_notify kernel/exit.c:682 [inline] do_exit+0x2334/0x2bd0 kernel/exit.c:845 do_group_exit+0x108/0x2c8 kernel/exit.c:922 get_signal+0x4e4/0x2a88 kernel/signal.c:2781 do_signal arch/arm64/kernel/signal.c:882 [inline] do_notify_resume+0x300/0x970 arch/arm64/kernel/signal.c:936 work_pending+0xc/0x2dc Allocated by task 0: slab_post_alloc_hook+0x50/0x5c0 mm/slab.h:516 slab_alloc_node mm/slub.c:2907 [inline] slab_alloc mm/slub.c:2915 [inline] kmem_cache_alloc+0x1f4/0x4c0 mm/slub.c:2920 alloc_pid+0xdc/0xc00 kernel/pid.c:180 copy_process+0x2794/0x5e18 kernel/fork.c:2129 kernel_clone+0x194/0x13c8 kernel/fork.c:2500 kernel_thread+0xd4/0x110 kernel/fork.c:2552 rest_init+0x44/0x4a0 init/main.c:687 arch_call_rest_init+0x1c/0x28 start_kernel+0x520/0x554 init/main.c:1064 0x0 Freed by task 270: slab_free_hook mm/slub.c:1562 [inline] slab_free_freelist_hook+0x98/0x260 mm/slub.c:1600 slab_free mm/slub.c:3161 [inline] kmem_cache_free+0x224/0x8e0 mm/slub.c:3177 put_pid.part.4+0xe0/0x1a8 kernel/pid.c:114 put_pid+0x30/0x48 kernel/pid.c:109 proc_do_cad_pid+0x190/0x1b0 kernel/sysctl.c:1401 proc_sys_call_handler+0x338/0x4b0 fs/proc/proc_sysctl.c:591 proc_sys_write+0x34/0x48 fs/proc/proc_sysctl.c:617 call_write_iter include/linux/fs.h:1977 [inline] new_sync_write+0x3ac/0x510 fs/read_write.c:518 vfs_write fs/read_write.c:605 [inline] vfs_write+0x9c4/0x1018 fs/read_write.c:585 ksys_write+0x124/0x240 fs/read_write.c:658 __do_sys_write fs/read_write.c:670 [inline] __se_sys_write fs/read_write.c:667 [inline] __arm64_sys_write+0x78/0xb0 fs/read_write.c:667 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall arch/arm64/kernel/syscall.c:49 [inline] el0_svc_common.constprop.1+0x16c/0x388 arch/arm64/kernel/syscall.c:129 do_el0_svc+0xf8/0x150 arch/arm64/kernel/syscall.c:168 el0_svc+0x28/0x38 arch/arm64/kernel/entry-common.c:416 el0_sync_handler+0x134/0x180 arch/arm64/kernel/entry-common.c:432 el0_sync+0x154/0x180 arch/arm64/kernel/entry.S:701 The buggy address belongs to the object at ffff23794dda0000 which belongs to the cache pid of size 224 The buggy address is located 4 bytes inside of 224-byte region [ffff23794dda0000, ffff23794dda00e0) The buggy address belongs to the page: page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4dda0 head:(____ptrval____) order:1 compound_mapcount:0 flags: 0x3fffc0000010200(slab|head) raw: 03fffc0000010200 dead000000000100 dead000000000122 ffff23794d40d080 raw: 0000000000000000 0000000000190019 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff23794dd9ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff23794dd9ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff23794dda0000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff23794dda0080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff23794dda0100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00 ================================================================== Link: https://lkml.kernel.org/r/20210524172230.38715-1-mark.rutland@arm.com Fixes: 9ec52099 ("[PATCH] replace cad_pid by a struct pid") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Christian Brauner <christian@brauner.io> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Marco Elver authored
Since wait_event() uses TASK_UNINTERRUPTIBLE by default, waiting for an allocation counts towards load. However, for KFENCE, this does not make any sense, since there is no busy work we're awaiting. Instead, use TASK_IDLE via wait_event_idle() to not count towards load. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1185565 Link: https://lkml.kernel.org/r/20210521083209.3740269-1-elver@google.com Fixes: 407f1d8c ("kfence: await for allocation using wait_event") Signed-off-by: Marco Elver <elver@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Hillf Danton <hdanton@sina.com> Cc: <stable@vger.kernel.org> [5.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Bogendoerfer authored
This reverts commit f685a533. The MIPS cache flush logic needs to know whether the mapping was already established to decide how to flush caches. This is done by checking the valid bit in the PTE. The commit above breaks this logic by setting the valid in the PTE in new mappings, which causes kernel crashes. Link: https://lkml.kernel.org/r/20210526094335.92948-1-tsbogend@alpha.franken.de Fixes: f685a533 ("MIPS: make userspace mapping young by default") Reported-by: Zhou Yanjie <zhouyanjie@wanyeetech.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Huang Pei <huangpei@loongson.cn> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-