- 05 Oct, 2011 20 commits
-
-
Alwin Beukers authored
- removed call to brcms_b_tx_fifo_suspended on receipt of TX FIFO suspend/flush completion signal. - removed brcms_b_tx_fifo_suspended function as it is not being used elsewhere. Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by:
Roland Vossen <rvossen@broadcom.com> Reviewed-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Alwin Beukers authored
- removed brcms_c_write_template_ram function. - removed brcms_c_mctrl function. - removed brcms_c_pllreq function. - removed brcms_c_mhf function. - removed brcms_c_rate_shm_offset function. - removed brcms_c_write_hw_bcntemplates function. Reported-by:
Johannes Berg <johannes@sipsolutions.net> Reviewed-by:
-
Alwin Beukers authored
Removed brcms_c_xmtfifo_sz_get function. Reported-by:
-
Alwin Beukers authored
- removed brcms_c_read_shm and brcms_c_write_shm functions. - removed redundant argument check from brcms_c_copyto_shm function. Reported-by:
-
Alwin Beukers authored
The comment says the rateset is being cleared when switching to GMODE_LEGACY_B, but the code that follows it does not do so. Besides, the rateset is already valid at this point. Reviewed-by:
-
Alwin Beukers authored
Reviewed-by:
-
Alwin Beukers authored
Empty functions are good candidates for removal. Reviewed-by:
-
Alwin Beukers authored
Reviewed-by:
-
Alwin Beukers authored
- removed unneeded return statements at end of functions. - changed return value of brcms_c_radio_monitor_start to void. Reviewed-by:
-
Alwin Beukers authored
Functions were trivial so not really adding value. Reviewed-by:
-
Alwin Beukers authored
Reviewed-by:
-
Franky Lin authored
Stop assigning priority to watchdog and dpc threads. Remove related code. Reviewed-by:
-
Franky Lin authored
Use constant for interrupt/polling mode configuration. Reviewed-by:
-
Franky Lin authored
rtnl lock is used improperly in fullmac. This patch intends to clean them up. Reported-by:
Sukesh Srikakula <sukeshs@broadcom.com> Reviewed-by:
-
Roland Vossen authored
Fix double include as detected by checkincludes script. Signed-off-by:
-
Arend van Spriel authored
The kernel provides bit operations to replace brcmu_bitcount so using those instead. Reported-by:
-
Arend van Spriel authored
The functions brcmu_bprintf and brcmu_binit could be replaced by snprintf kernel function. These are no longer used in both brcm80211 drivers so they have been removed. Reported-by:
-
Arend van Spriel authored
In the receive path of the brcmsmac driver probe request frames and frames with invalid mac address fields are dropped. This is only fine for STA mode. Anticipating coming AP and monitor mode functionality this is unwanted behavior. Reported-by:
-
Arend van Spriel authored
The ssn should be given a valid value by the driver or it should not override the value. Removed override to zero from the driver. Reported-by:
-
Roland Vossen authored
Several fields were unused or were only set once. They have been removed. Uncalled functions that relied on these constants have been removed as well. Reviewed-by:
Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by:
-
- 04 Oct, 2011 20 commits
-
-
Mark Einon authored
The mechanism by which the device is put into low power sleep is broken in that the device can never come back out of low power mode afterwards. Temorary fix to bring the device back out of sleep almost immediately, until a suitable wake trigger can be found. Signed-off-by:
Mark Einon <mark.einon@gmail.com> Signed-off-by:
-
Mark Einon authored
Adding copyright notices and adding myself as a module author. Signed-off-by:
-
Mark Einon authored
set_mac is implemented, and there have been lots of new ethtool_ops added, so removing the TODO to add more kernel parameters. Signed-off-by:
-
Mark Einon authored
The error_timer was only getting initialised and an initial jiffies value set following a probe. This could result in the timer needlessly expiring immediately after et131x_open is called. Now this is all done from the open call instead. Signed-off-by:
-
Mark Einon authored
Added basic suspend & resume functionality. Tested on an et1310 device, and putting Fedora15 host in and out of hibernation successfully. Signed-off-by:
-
Mark Einon authored
adapter->bmsr is no longer being updated, but is also used to check the link state in places. Remove bmsr from adapter, and replace link state checks with phydev->link check. Signed-off-by:
-
Mark Einon authored
In several places in the code, the pm_csr register is read and the PHY_SW_COMA bit checked. Move this check into its own small function to make the code more readable. Signed-off-by:
-
Mark Einon authored
Removing this as I'm pretty sure its not true, and alloc_etherdev isn't provided by this driver anyway. Alternatively, its a badly written comment and I don't understand it. This drivers use of alloc_etherdev() is within keeping with other net devices, so I'm happy. Signed-off-by:
-
David Kilroy authored
The message is in the wrong place. We definitely don't want to return at this point, as we may need to turn off encryption. Reported-by:
Henk de Groot <pe1dnn@amsat.org> Signed-off-by:
David Kiroy <kilroyd@googlemail.com> Signed-off-by:
-
David Kilroy authored
The function no longer compiles, so we just remove it. Reported-by:
-
David Kilroy authored
in DBG machinery so you don't have to declare DBG_FUNC at the start of all functions. This just makes it easy to add DBG conforming to existing code. The patch reformats the changed #defines to satisfy checkstyle.pl Signed-off-by:
-
K. Y. Srinivasan authored
Get rid of unnecessary comments. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
K. Y. Srinivasan authored
Now that the mouse driver is functional, enable the auto-loading of the driver. Signed-off-by:
-
K. Y. Srinivasan authored
Cleanup mousevsc_on_device_add(). Signed-off-by:
-
K. Y. Srinivasan authored
Get rid of mousevsc_on_receive_input_report() by inlining the code. Signed-off-by:
-
K. Y. Srinivasan authored
Cleanup all camel cased names. Signed-off-by:
-
K. Y. Srinivasan authored
Now get rid of the machinery for managing the life-cycle of the mousevsc_dev as this is not needed. Signed-off-by:
-
K. Y. Srinivasan authored
Now, cleanup mousevsc_remove(). The mouse driver once initialized only receives data from the host. So, by closing the channel first in the unload path, we can properly deal with inflight packets. So, we don't need the machinery for managing the life-cycle of the mousevsc_dev object. Get rid of the unnecessary code. Signed-off-by:
-
K. Y. Srinivasan authored
Get rid of mousevsc_on_device_remove() by inlining code. Signed-off-by:
-
K. Y. Srinivasan authored
Cleanup mousevsc_connect_to_vsp(). There is no need to take reference on the mousevsc device object when we are setting up the device. As part of this cleanup get rid of get_input_device() as this function is only used here. Signed-off-by:
-
