For forwards compatibilyt, we allow bkeys of unknown type in leaf nodes;
we can simply ignore metadata we don't understand. Pointers to btree
nodes must always be of known types, howwever.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The btree write buffer flush fastpath that avoids the main transaction
commit path had the unfortunate side effect of not doing btree node
merging.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

There's been a bug in the btree write buffer where it wasn't triggering
btree node merges - and leaving behind a bunch of nearly empty btree
nodes.

Then during journal replay, when updates to the backpointers btree
aren't using the btree write buffer (because we require synchronization
with journal replay), we end up doing those merges all at once.

Then if it's the interior update path running them, we deadlock because
those run with the highest watermark.

There's no real need for the interior update path to be doing btree node
merges; other code paths can handle that at lower watermarks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes a deadlock where the interior update path during journal
replay ends up doing a ton of merges on the backpointers btree, and
deadlocking.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bch2_journal_flush_seq requires us to have a write ref
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

btree_key_can_insert_cached() should be checking the watermark -
BCH_TRANS_COMMIT_journal_replay really means nonblocking mode when
watermark < reclaim, it was being used incorrectly.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes a bug where we fail to start when upgrading/downgrading
because we forgot we needed to go rw.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

many nodes found during scan will be old nodes, overwritten by newer
nodes
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

.to_text() functions need to work on key values that didn't pass .valid
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Need to check if we have a valid bucket before checking if ptr is stale
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

add missing validation; fixes assertion pop in bkey unpack
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The btree paths array is now dynamically resizable - and as well the
btree_insert_entries array, as it needs to be the same size.

The merge path (and interior update path) allocates new btree paths,
thus can trigger a resize; thus we need to not retain direct pointers
after invoking merge; similarly when running btree node triggers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

It turns out - btree splits happen with the rest of the transaction
still locked, to avoid unnecessary restarts, which means using nofail
doesn't work here - we can deadlock.

Fortunately, we now have the ability to return errors here.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We weren't respecting trans->journal_replay_not_finished - we shouldn't
be searching the journal keys unless we have a ref on them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

dropping read locks in bch2_btree_node_lock_write_nofail() dates from
before we had the cycle detector; we can now tell the cycle detector
directly when taking a lock may not fail because we can't handle
transaction restarts.

This is needed for adding should_be_locked asserts.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

One btree update might have terminated in a node update, and then while
it is in flight another btree update might free that original node.

This race has to be handled in btree_update_nodes_written() - we were
missing a READ_ONCE().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

If a device wasn't used for btree nodes, no need to scan for them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

shoot down journal keys _before_ populating journal keys with pointers
to scanned nodes
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

- fix return types: promoting from unsigned to ssize_t does not do what
  we want here, and was pointless since the rest of the eytzinger code
  is u32
- nr, not size
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bch2_acl_from_disk() uses allocate_dropping_locks, and can thus return
a transaction restart - this wasn't handled.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

When allocating bkey_cached from bc->freed_pcpu list, it missed
decreasing the count of nr_freed_pcpu which would cause the mismatch
between the value of nr_freed_pcpu and the list items. This problem
also exists in moving new bkey_cached to bc->freed_pcpu list.
If these happened, the bug info may appear in
bch2_fs_btree_key_cache_exit by the follow code:

   BUG_ON(list_count_nodes(&bc->freed_pcpu) != bc->nr_freed_pcpu);
   BUG_ON(list_count_nodes(&bc->freed_nonpcpu) != bc->nr_freed_nonpcpu);

Fixes: c65c13f0 ("bcachefs: Run btree key cache shrinker less aggressively")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Multiple bug fixes for journal iters:

 - When the journal keys gap buffer is resized, we have to adjust the
   iterators for moving the gap to the end
 - We don't want to rewind iterators to point to the key we just
   inserted if it's not for the correct btree/level

Also, add some new assertions.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The struct field swap can collide with the swap() macro defined in
linux/minmax.h. Rename the struct field to prevent such collisions.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Now that bcachefs docs exist in Documentation/filesystems/bcachefs/,
cover it in MAINTAINERS entry for the filesystem.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Commit eb386617 ("bcachefs: Errcode tracepoint, documentation")
adds initial bcachefs documentation (private error codes) but without
any table of contents tree for the filesystem docs, hence Sphinx warns:

Documentation/filesystems/bcachefs/errorcodes.rst: WARNING: document isn't included in any toctree

Add bcachefs toctree to fix above warning.

Fixes: eb386617 ("bcachefs: Errcode tracepoint, documentation")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

"bcachefs; Fix deadlock in bch2_btree_update_start()" was a significant
performance regression (nearly 50%) on multithreaded random writes with
fio.

The reason is that the journal watermark checks multiple things,
including the state of the btree write buffer, and on multithreaded
update heavy workloads we're bottleneked on write buffer flushing - we
don't want kicknig off btree updates to depend on the state of the write
buffer.

This isn't strictly correct; the interior btree update path does do
write buffer updates, but it's a tiny fraction of total accounting
updates and we're more concerned with space in the journal itself.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

BCH_IOCTL_FSCK_OFFLINE allows the userspace fsck tool to use the kernel
implementation of fsck - primarily when the kernel version is a better
version match.

It should look and act exactly like the normal userspace fsck that the
user expected to be invoking, so errors should never result in a kernel
panic.

We may want to consider further restricting errors=panic - it's only
intended for debugging in controlled test environments, it should have
no purpose it normal usage.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

To open an encrypted filesystem, we use request_key() to get the
encryption key from the user's keyring - but request_key() needs to
happen in the context of the process that invoked the ioctl.

This easily fixed by using bch2_fs_open() in nostart mode.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The ! was obviously intended to be ~.  As it is, this function does
the equivalent to: "addr[bit / 64] = 0;".

Fixes: 27fcec6c ("bcachefs: Clear recovery_passes_required as they complete without errors")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Print start and end level of the btree update; also a bit of cleanup.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

sysfs is limited to PAGE_SIZE, and when we're debugging strange
deadlocks/priority inversions we need to see the full list.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>