- 16 Feb, 2023 4 commits
-
-
Anders Roxell authored
Clang warns: arch/powerpc/mm/book3s64/radix_tlb.c:1191:23: error: variable 'hstart' is uninitialized when used here __tlbiel_va_range(hstart, hend, pid, ^~~~~~ arch/powerpc/mm/book3s64/radix_tlb.c:1191:31: error: variable 'hend' is uninitialized when used here __tlbiel_va_range(hstart, hend, pid, ^~~~ Rework the 'if (IS_ENABLE(CONFIG_TRANSPARENT_HUGEPAGE))' so hstart/hend is always initialized to silence the warnings. That will also simplify the 'else' path. Clang is getting confused with these warnings, but the warnings is a false-positive. Suggested-by:Arnd Bergmann <arnd@arndb.de> Suggested-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220810114318.3220630-1-anders.roxell@linaro.org
-
Michael Ellerman authored
When using the LLVM integrated assembler (llvm-as), the book3e build fails with: arch/powerpc/mm/nohash/tlb_low_64e.S:354:2: error: invalid instruction tlbilxva 0,%r15 ^ tlbilxva is an extended mnemonic for tlbilx, but llvm-as also doesn't support tlbilx, despite it being an e500mc instruction. Fix it by using the existing PPC_TLBILX_VA macro. The resulting binary is identical when building with binutils. Signed-off-by:
-
Michael Ellerman authored
With bintils >= 2.38 the ppc64_book3e_allmodconfig build fails: {standard input}: Assembler messages: {standard input}:196: Error: unrecognized opcode: `lbarx' {standard input}:196: Error: unrecognized opcode: `stbcx.' make[5]: *** [scripts/Makefile.build:252: arch/powerpc/mm/nohash/e500_hugetlbpage.o] Error 1 That happens because the default CPU for that config is e5500, set via CONFIG_TARGET_CPU, and so the assembler is building for e5500, which doesn't support those instructions. Fix it by using machine directives to tell the assembler to assemble the relevant code for e6500, which does support lbarx/stbcx. That is safe because the code already has the CPU_FTR_SMT check, which ensures the lbarx sequence doesn't run on e5500, which doesn't support SMT. Signed-off-by: -
Andrew Donnellan authored
When a user updates a variable through the PLPKS secvar interface, we take the first 8 bytes of the data written to the update attribute to pass through to the H_PKS_SIGNED_UPDATE hcall as flags. These bytes are always written in big-endian format. Currently, the flags bytes are memcpy()ed into a u64, which is then loaded into a register to pass as part of the hcall. This means that on LE systems, the bytes are in the wrong order. Use be64_to_cpup() instead, to ensure the flags bytes are byteswapped if necessary. Reported-by:
Stefan Berger <stefanb@linux.ibm.com> Fixes: ccadf154 ("powerpc/pseries: Implement secvars for dynamic secure boot") Signed-off-by:
Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by:
-
- 15 Feb, 2023 6 commits
-
-
Nathan Chancellor authored
Clang warns: drivers/macintosh/windfarm_lm75_sensor.c:63:14: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion] lm->inited = 1; ^ ~ drivers/macintosh/windfarm_smu_sensors.c:356:19: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion] pow->fake_volts = 1; ^ ~ drivers/macintosh/windfarm_smu_sensors.c:368:18: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion] pow->quadratic = 1; ^ ~ There is no bug here since no code checks the actual value of these fields, just whether or not they are zero (boolean context), but this can be easily fixed by switching to an unsigned type. Signed-off-by: -
Sourabh Jain authored
Print the FDT error description along with the error message if failed to set the "linux,drconf-usable-memory" property in the kdump kernel's FDT. Signed-off-by:
Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by:
Hari Bathini <hbathini@linux.ibm.com> Signed-off-by:
-
Nathan Lynch authored
machine_is() can't provide correct results before probe_machine() has run. Warn when it's used too early in boot, placing the WARN_ON() in a helper function so the reported file:line indicates exactly what went wrong. checkpatch complains about __attribute__((weak)) in the patch, so change that to __weak, and align the line continuations as well. Signed-off-by:
Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by:
-
Christophe Leroy authored
E500MC64 is a processor pre-dating E5500 that has never been commercialised. Use -mcpu=e5500 for E5500 core. More details at https://gcc.gnu.org/PR108149Signed-off-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
-
Ganesh Goudar authored
When a PCI error is encountered 6th time in an hour we set the channel state to perm_failure and notify the driver about the permanent failure. However, after upstream commit 38ddc011 ("powerpc/eeh: Make permanently failed devices non-actionable"), EEH handler stops calling any routine once the device is marked as permanent failure. This issue can lead to fatal consequences like kernel hang with certain PCI devices. Following log is observed with lpfc driver, with and without this change, Without this change kernel hangs, If PCI error is encountered 6 times for a device in an hour. Without the change EEH: Beginning: 'error_detected(permanent failure)' PCI 0132:60:00.0#600000: EEH: not actionable (1,1,1) PCI 0132:60:00.1#600000: EEH: not actionable (1,1,1) EEH: Finished:'error_detected(permanent failure)' With the change EEH: Beginning: 'error_detected(permanent failure)' EEH: Invoking lpfc->error_detected(permanent failure) EEH: lpfc driver reports: 'disconnect' EEH: Invoking lpfc->error_detected(permanent failure) EEH: lpfc driver reports: 'disconnect' EEH: Finished:'error_detected(permanent failure)' To fix the issue, set channel state to permanent failure after notifying the drivers. Fixes: 38ddc011 ("powerpc/eeh: Make permanently failed devices non-actionable") Suggested-by:
Mahesh Salgaonkar <mahesh@linux.ibm.com> Signed-off-by:
Ganesh Goudar <ganeshgr@linux.ibm.com> Signed-off-by:
-
Mathieu Desnoyers authored
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents building against kernel headers from the build environment in scenarios where kernel headers are installed into a specific output directory (O=...). Cc: stable@vger.kernel.org # v5.18+ Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
- 13 Feb, 2023 23 commits
-
-
Nathan Lynch authored
With the tokens for all implemented RTAS functions now available via rtas_function_token(), which is optimal and safe for arbitrary contexts, there is no need to use rtas_token() or cache its result. Most conversions are trivial, but a few are worth describing in more detail: * Error injection token comparisons for lockdown purposes are consolidated into a simple predicate: token_is_restricted_errinjct(). * A couple of special cases in block_rtas_call() do not use rtas_token() but perform string comparisons against names in the function table. These are converted to compare against token values instead, which is logically equivalent but less expensive. * The lookup for the ibm,os-term token can be deferred until needed, instead of caching it at boot to avoid device tree traversal during panic. * Since rtas_function_token() accesses a read-only data structure without taking any locks, xmon's lookup of set-indicator can be performed as needed instead of cached at startup. Signed-off-by:
-
Nathan Lynch authored
Users of rtas_token() supply a string argument that can't be validated at build time. A typo or misspelling has to be caught by inspection or by observing wrong behavior at runtime. Since the core RTAS code now has consolidated the names of all possible RTAS functions and mapped them to their tokens, token lookup can be implemented using symbolic constants to index a static array. So introduce rtas_function_token(), a replacement API which does that, along with a rtas_service_present()-equivalent helper, rtas_function_implemented(). Callers supply an opaque predefined function handle which is used internally to index the function table. Typos or other inappropriate arguments yield build errors, and the function handle is a type that can't be easily confused with RTAS tokens or other integer types. Signed-off-by:
-
Nathan Lynch authored
Convert the TLB block invalidate characteristics discovery to the new papr_sysparm API. This occurs too early in boot to use papr_sysparm_buf_alloc(), so use a static buffer. Signed-off-by:
-
Nathan Lynch authored
The new papr_sysparm API handles the details of system parameter retrieval. Use that instead of open-coding the RTAS call, work area management, and retries. Signed-off-by:
-
Nathan Lynch authored
/proc/powerpc/lparcfg derives the LPAR name and SPLPAR characteristics it reports using bare calls to the RTAS ibm,get-system-parameter function. Convert these to the higher-level papr_sysparm API, which handles the tedious details. While the SPLPAR string parsing code could stand to be updated, that should be done in a separate change. It is minimally modified here to reduce the risk of changing behavior. Signed-off-by:
-
Nathan Lynch authored
Convert the direct invocation of the ibm,get-system-parameter RTAS function to papr_sysparm_get(). Signed-off-by:
-
Nathan Lynch authored
Introduce a set of APIs for retrieving and updating PAPR system parameters. This encapsulates the toil of temporary RTAS work area management, RTAS function call retries, and translation of RTAS call statuses to conventional error values. There are several places in the kernel that already retrieve system parameters by calling the RTAS ibm,get-system-parameter function directly. These will be converted to papr_sysparm_get() in changes to follow. As for updating system parameters, current practice is to use sys_rtas() from user space; there are no in-kernel users of the RTAS ibm,set-system-parameter function. However this will become deprecated in time because it is not compatible with lockdown. The papr_sysparm_* APIs will form the common basis for in-kernel and user space access to system parameters. The code to expose the set/get capabilities to user space will follow. Signed-off-by:
-
Nathan Lynch authored
Hold a work area object for the duration of the RTAS ibm,configure-connector sequence, eliminating locking and copying around each RTAS call. Signed-off-by:
-
Nathan Lynch authored
Various pseries-specific RTAS functions take a temporary "work area" parameter - a buffer in memory accessible to RTAS. Typically such functions are passed the statically allocated rtas_data_buf buffer as the argument. This buffer is protected by a global spinlock. So users of rtas_data_buf cannot perform sleeping operations while accessing the buffer. Most RTAS functions that have a work area parameter can return a status (-2/990x) that indicates that the caller should retry. Before retrying, the caller may need to reschedule or sleep (see rtas_busy_delay() for details). This combination of factors leads to uncomfortable constructions like this: do { spin_lock(&rtas_data_buf_lock); rc = rtas_call(token, __pa(rtas_data_buf, ...); if (rc == 0) { /* parse or copy out rtas_data_buf contents */ } spin_unlock(&rtas_data_buf_lock); } while (rtas_busy_delay(rc)); Another unfortunately common way of handling this is for callers to blithely ignore the possibility of a -2/990x status and hope for the best. If users were allowed to perform blocking operations while owning a work area, the programming model would become less tedious and error-prone. Users could schedule away, sleep, or perform other blocking operations without having to release and re-acquire resources. We could continue to use a single work area buffer, and convert rtas_data_buf_lock to a mutex. But that would impose an unnecessarily coarse serialization on all users. As awkward as the current design is, it prevents longer running operations that need to repeatedly use rtas_data_buf from blocking the progress of others. There are more considerations. One is that while 4KB is fine for all current in-kernel uses, some RTAS calls can take much smaller buffers, and some (VPD, platform dumps) would likely benefit from larger ones. Another is that at least one RTAS function (ibm,get-vpd) has *two* work area parameters. And finally, we should expect the number of work area users in the kernel to increase over time as we introduce lockdown-compatible ABIs to replace less safe use cases based on sys_rtas/librtas. So a special-purpose allocator for RTAS work area buffers seems worth trying. Properties: * The backing memory for the allocator is reserved early in boot in order to satisfy RTAS addressing requirements, and then managed with genalloc. * Allocations can block, but they never fail (mempool-like). * Prioritizes first-come, first-serve fairness over throughput. * Early boot allocations before the allocator has been initialized are served via an internal static buffer. Intended to replace rtas_data_buf. New code that needs RTAS work area buffers should prefer this API. Signed-off-by: -
Nathan Lynch authored
Decompose the RTAS entry C code into tracing and non-tracing variants, calling the just-added tracepoints in the tracing-enabled path. Skip tracing in contexts known to be unsafe (real mode, CPU offline). Signed-off-by:
-
Nathan Lynch authored
Add two sets of tracepoints to be used around RTAS entry: * rtas_input/rtas_output, which emit the function name, its inputs, the returned status, and any other outputs. These produce an API-level record of OS<->RTAS activity. * rtas_ll_entry/rtas_ll_exit, which are lower-level and emit the entire contents of the parameter block (aka rtas_args) on entry and exit. Likely useful only for debugging. With uses of these tracepoints in do_enter_rtas() to be added in the following patch, examples of get-time-of-day and event-scan functions as rendered by trace-cmd (with some multi-line formatting manually imposed on the rtas_ll_* entries to avoid extremely long lines in the commit message): cat-36800 [059] 4978.518303: rtas_input: get-time-of-day arguments: cat-36800 [059] 4978.518306: rtas_ll_entry: token=3 nargs=0 nret=8 params: [0]=0x00000000 [1]=0x00000000 [2]=0x00000000 [3]=0x00000000 [4]=0x00000000 [5]=0x00000000 [6]=0x00000000 [7]=0x00000000 [8]=0x00000000 [9]=0x00000000 [10]=0x00000000 [11]=0x00000000 [12]=0x00000000 [13]=0x00000000 [14]=0x00000000 [15]=0x00000000 cat-36800 [059] 4978.518366: rtas_ll_exit: token=3 nargs=0 nret=8 params: [0]=0x00000000 [1]=0x000007e6 [2]=0x0000000b [3]=0x00000001 [4]=0x00000000 [5]=0x0000000e [6]=0x00000008 [7]=0x2e0dac40 [8]=0x00000000 [9]=0x00000000 [10]=0x00000000 [11]=0x00000000 [12]=0x00000000 [13]=0x00000000 [14]=0x00000000 [15]=0x00000000 cat-36800 [059] 4978.518366: rtas_output: get-time-of-day status: 0, other outputs: 2022 11 1 0 14 8 772648000 kworker/39:1-336 [039] 4982.731623: rtas_input: event-scan arguments: 4294967295 0 80484920 2048 kworker/39:1-336 [039] 4982.731626: rtas_ll_entry: token=6 nargs=4 nret=1 params: [0]=0xffffffff [1]=0x00000000 [2]=0x04cc1a38 [3]=0x00000800 [4]=0x00000000 [5]=0x0000000e [6]=0x00000008 [7]=0x2e0dac40 [8]=0x00000000 [9]=0x00000000 [10]=0x00000000 [11]=0x00000000 [12]=0x00000000 [13]=0x00000000 [14]=0x00000000 [15]=0x00000000 kworker/39:1-336 [039] 4982.731676: rtas_ll_exit: token=6 nargs=4 nret=1 params: [0]=0xffffffff [1]=0x00000000 [2]=0x04cc1a38 [3]=0x00000800 [4]=0x00000001 [5]=0x0000000e [6]=0x00000008 [7]=0x2e0dac40 [8]=0x00000000 [9]=0x00000000 [10]=0x00000000 [11]=0x00000000 [12]=0x00000000 [13]=0x00000000 [14]=0x00000000 [15]=0x00000000 kworker/39:1-336 [039] 4982.731677: rtas_output: event-scan status: 1, other outputs: Signed-off-by: -
Nathan Lynch authored
Make do_enter_rtas() take a pointer to struct rtas_args and do the __pa() conversion in one place instead of leaving it to callers. This also makes it possible to introduce enter/exit tracepoints that access the rtas_args struct fields. There's no apparent reason to force inlining of do_enter_rtas() either, and it seems to bloat the code a bit. Let the compiler decide. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Nathan Lynch authored
The core RTAS support code and its clients perform two types of lookup for RTAS firmware function information. First, mapping a known function name to a token. The typical use case invokes rtas_token() to retrieve the token value to pass to rtas_call(). rtas_token() relies on of_get_property(), which performs a linear search of the /rtas node's property list under a lock with IRQs disabled. Second, and less common: given a token value, looking up some information about the function. The primary example is the sys_rtas filter path, which linearly scans a small table to match the token to a rtas_filter struct. Another use case to come is RTAS entry/exit tracepoints, which will require efficient lookup of function names from token values. Currently there is no general API for this. We need something much like the existing rtas_filters table, but more general and organized to facilitate efficient lookups. Introduce: * A new rtas_function type, aggregating function name, token, and filter. Other function characteristics could be added in the future. * An array of rtas_function, where each element corresponds to a known RTAS function. All information in the table is static save the token values, which are derived from the device tree at boot. The array is sorted by function name to allow binary search. * A named constant for each known RTAS function, used to index the function array. These also will be used in a client-facing API to be added later. * An xarray that maps valid tokens to rtas_function objects. Fold the existing rtas_filter table into the new rtas_function array, with the appropriate adjustments to block_rtas_call(). Remove now-redundant fields from struct rtas_filter. Preserve the function of the CONFIG_CPU_BIG_ENDIAN guard in the current filter table by introducing a per-function flag that is set for the function entries related to pseries LPAR migration. These have never had working users via sys_rtas on ppc64le; see commit de0f7349 ("powerpc/rtas: prevent suspend-related sys_rtas use on LE"). Convert rtas_token() to use a lockless binary search on the function table. Fall back to the old behavior for lookups against names that are not known to be RTAS functions, but issue a warning. rtas_token() is for function names; it is not a general facility for accessing arbitrary properties of the /rtas node. All known misuses of rtas_token() have been converted to more appropriate of_ APIs in preceding changes. Signed-off-by:
-
Nathan Lynch authored
The pseries platform has been LPAR-only for several generations, and the PAPR spec: * Guarantees that timebase synchronization is performed by the platform ("The timebase registers are synchronized by the platform before CPUs are given to the OS" - 7.3.8 SMP Support). * Completely omits the RTAS freeze-time-base and thaw-time-base RTAS functions, which are CHRP artifacts. This code is effectively unused on currently supported models, so drop it. Signed-off-by: -
Nathan Lynch authored
Some RTAS functions that have work area parameters impose alignment requirements on the work area passed to them by the OS. Examples include: - ibm,configure-connector - ibm,update-nodes - ibm,update-properties 4KB is the greatest alignment required by PAPR for such buffers. rtas_data_buf used to have a __page_aligned attribute in the arch/ppc64 days, but that was changed to __cacheline_aligned for unknown reasons by commit 033ef338 ("powerpc: Merge rtas.c into arch/powerpc/kernel"). That works out to 128-byte alignment on ppc64, which isn't right. This was found by inspection and I'm not aware of any real problems caused by this. Either current RTAS implementations don't enforce the alignment constraints, or rtas_data_buf is always being placed at a 4KB boundary by accident (or both, perhaps). Use __aligned(SZ_4K) to ensure the rtas_data_buf has alignment appropriate for all users. Signed-off-by:
-
Nathan Lynch authored
The ibm,get-system-parameter RTAS function may return -2 or 990x, which indicate that the caller should try again. pSeries_cmo_feature_init() ignores this, making it possible to fail to detect cooperative memory overcommit capabilities during boot. Move the RTAS call into a conventional rtas_busy_delay()-based loop, dropping unnecessary clearing of rtas_data_buf. Signed-off-by:
-
Nathan Lynch authored
The ibm,get-system-parameter RTAS function may return -2 or 990x, which indicate that the caller should try again. lparcfg's parse_system_parameter_string() ignores this, making it possible to intermittently report incorrect SPLPAR characteristics. Move the RTAS call into a coventional rtas_busy_delay()-based loop. Signed-off-by:
-
Nathan Lynch authored
The ibm,get-system-parameter RTAS function may return -2 or 990x, which indicate that the caller should try again. pseries_lpar_read_hblkrm_characteristics() ignores this, making it possible to incorrectly detect TLB block invalidation characteristics at boot. Move the RTAS call into a coventional rtas_busy_delay()-based loop. Signed-off-by:
-
Nathan Lynch authored
The ibm,get-system-parameter RTAS function may return -2 or 990x, which indicate that the caller should try again. read_24x7_sys_info() ignores this, allowing transient failures in reporting processor module information. Move the RTAS call into a coventional rtas_busy_delay()-based loop, along with the parsing of results on success. Signed-off-by:
-
Nathan Lynch authored
Some code that runs early in boot calls RTAS functions that can return -2 or 990x statuses, which mean the caller should retry. An example is pSeries_cmo_feature_init(), which invokes ibm,get-system-parameter but treats these benign statuses as errors instead of retrying. pSeries_cmo_feature_init() and similar code should be made to retry until they succeed or receive a real error, using the usual pattern: do { rc = rtas_call(token, etc...); } while (rtas_busy_delay(rc)); But rtas_busy_delay() will perform a timed sleep on any 990x status. This isn't safe so early in boot, before the CPU scheduler and timer subsystem have initialized. The -2 RTAS status is much more likely to occur during single-threaded boot than 990x in practice, at least on PowerVM. This is because -2 usually means that RTAS made progress but exhausted its self-imposed timeslice, while 990x is associated with concurrent requests from the OS causing internal contention. Regardless, according to the language in PAPR, the OS should be prepared to handle either type of status at any time. Add a fallback path to rtas_busy_delay() to handle this as safely as possible, performing a small delay on 990x. Include a counter to detect retry loops that aren't making progress and bail out. Add __ref to rtas_busy_delay() since it now conditionally calls an __init function. This was found by inspection and I'm not aware of any real failures. However, the implementation of rtas_busy_delay() before commit 38f7b706 ("powerpc/rtas: rtas_busy_delay() improvements") was not susceptible to this problem, so let's treat this as a regression. Signed-off-by: -
Russell Currey authored
Add support for loading keys from the PLPKS on pseries machines, with the "ibm,plpks-sb-v1" format. The object format is expected to be the same, so there shouldn't be any functional differences between objects retrieved on powernv or pseries. Unlike on powernv, on pseries the format string isn't contained in the device tree. Use secvar_ops->format() to fetch the format string in a generic manner, rather than searching the device tree ourselves. (The current code searches the device tree for a node compatible with "ibm,edk2-compat-v1". This patch switches to calling secvar_ops->format(), which in the case of OPAL/powernv means opal_secvar_format(), which searches the device tree for a node compatible with "ibm,secvar-backend" and checks its "format" property. These are equivalent, as skiboot creates a node with both "ibm,edk2-compat-v1" and "ibm,secvar-backend" as compatible strings.) Signed-off-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
-
Russell Currey authored
A few improvements to load_powerpc.c: - include integrity.h for the pr_fmt() - move all error reporting out of get_cert_list() - use ERR_PTR() to better preserve error detail - don't use pr_err() for missing keys Reviewed-by:
Mimi Zohar <zohar@linux.ibm.com> Signed-off-by:
-
Russell Currey authored
The pseries platform can support dynamic secure boot (i.e. secure boot using user-defined keys) using variables contained with the PowerVM LPAR Platform KeyStore (PLPKS). Using the powerpc secvar API, expose the relevant variables for pseries dynamic secure boot through the existing secvar filesystem layout. The relevant variables for dynamic secure boot are signed in the keystore, and can only be modified using the H_PKS_SIGNED_UPDATE hcall. Object labels in the keystore are encoded using ucs2 format. With our fixed variable names we don't have to care about encoding outside of the necessary byte padding. When a user writes to a variable, the first 8 bytes of data must contain the signed update flags as defined by the hypervisor. When a user reads a variable, the first 4 bytes of data contain the policies defined for the object. Limitations exist due to the underlying implementation of sysfs binary attributes, as is the case for the OPAL secvar implementation - partial writes are unsupported and writes cannot be larger than PAGE_SIZE. (Even when using bin_attributes, which can be larger than a single page, sysfs only gives us one page's worth of write buffer at a time, and the hypervisor does not expose an interface for partial writes.) Co-developed-by:
Nayna Jain <nayna@linux.ibm.com> Signed-off-by:
-
- 12 Feb, 2023 7 commits
-
-
Russell Currey authored
Before interacting with the PLPKS, we ask the hypervisor to generate a password for the current boot, which is then required for most further PLPKS operations. If we kexec into a new kernel, the new kernel will try and fail to generate a new password, as the password has already been set. Pass the password through to the new kernel via the device tree, in /chosen/ibm,plpks-pw. Check for the presence of this property before trying to generate a new password - if it exists, use the existing password and remove it from the device tree. This only works with the kexec_file_load() syscall, not the older kexec_load() syscall, however if you're using Secure Boot then you want to be using kexec_file_load() anyway. Signed-off-by:
-
Russell Currey authored
Add helper function to get the PLPKS password length. This will be used in a later patch to support passing the password between kernels over kexec. Signed-off-by:
-
Andrew Donnellan authored
When the H_PKS_GEN_PASSWORD hcall returns H_IN_USE, operations that require authentication (i.e. anything other than reading a world-readable variable) will not work. The current error message doesn't explain this clearly enough. Reword it to emphasise that authenticated operations will fail. Signed-off-by:
-
Andrew Donnellan authored
It seems a bit unnecessary for the PLPKS code to have a user-visible config option when it doesn't do anything on its own, and there's existing options for enabling Secure Boot-related features. It should be enabled by PPC_SECURE_BOOT, which will eventually be what uses PLPKS to populate keyrings. However, we can't get of the separate option completely, because it will also be used for SED Opal purposes. Change PSERIES_PLPKS into a hidden option, which is selected by PPC_SECURE_BOOT. Signed-off-by:
-
Andrew Donnellan authored
Currently, plpks_read_var() allocates a buffer to pass to the H_PKS_READ_OBJECT hcall, then allocates another buffer into which the data is copied, and returns that buffer to the caller. This is a bit over the top - while we probably still want to allocate a separate buffer to pass to the hypervisor in the hcall, we can let the caller allocate the final buffer and specify the size. Don't allocate var->data in plpks_read_var(), instead expect the caller to allocate it. If the caller needs to discover the size, it can set var->data to NULL and var->datalen will be populated. Update header file to document this. Suggested-by:
-
Russell Currey authored
The plpks code converts hypervisor return codes into their Linux equivalents so that users can understand them. Having access to the original return codes is really useful for debugging, so add a pr_debug() so we don't lose information from the conversion. Signed-off-by:
-
Nayna Jain authored
The Platform Keystore provides a signed update interface which can be used to create, replace or append to certain variables in the PKS in a secure fashion, with the hypervisor requiring that the update be signed using the Platform Key. Implement an interface to the H_PKS_SIGNED_UPDATE hcall in the plpks driver to allow signed updates to PKS objects. (The plpks driver doesn't need to do any cryptography or otherwise handle the actual signed variable contents - that will be handled by userspace tooling.) Signed-off-by:
-
