Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-and-reviewed-by: Yehuda Yitschak <yehuday@marvell.com>
Tested-and-reviewed-by: Lior Amsalem <alior@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Merge branch 'mvebu-misc-fixes' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

The ->probe() function of the mv_xor function contains in its error
handling code a loop to cleanup the XOR channels that had been
successfully initialized if some other XOR channel fails to be
initialized. It does that by traveling the list of XOR channels, and
cleanup those for which the pointer is not NULL.

However, since the mv_xor_channel_add() function return a PTR_ERR
style value, the pointer is not NULL on error. So, when handling the
error of a given channel initialization, we cleanup this channel
initialization and mark this channel entry as NULL in the array. This
allows the remaining of the cleanup (for other channels) to work
properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

The irq_of_parse_and_map() function returns 0 on failure, and does not
return an error code, so we fix the calling site of
irq_of_parse_and_map() in the mv_xor driver.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Even through the usage of devm_*() functions is generally recommended
over their classic variants, in the case of devm_request_irq()
combined with irq_of_parse_and_map(), it doesn't work nicely.

We have the following scenario:

 irq_of_parse_and_map(...)
 devm_request_irq(...)

For some reason, the driver initialization fails at a later
point. Since irq_of_parse_and_map() is no device-managed, we do a:

 irq_dispose_mapping(...)

Unfortunately, this doesn't work, because the free_irq() must be done
prior to calling irq_dispose_mapping(). But with the devm mechanism,
the automatic free_irq() would happen only after we get out of the
->probe() function.

So basically, we revert to using request_irq() with traditional error
handling, so that in case of error, free_irq() gets called before
irq_dispose_mapping().
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

The XOR channels on Marvell SoCs have a Window Override Control
register that allow to do some fancy things with addresses. Those
features are not used by the driver, but some U-Boot versions anyway
modify those registers.

For some reason, the U-Boot on OpenBlocks AX3-4 was setting an invalid
value in those registers when the addition 2 GB DRAM chip was plugged
into the board, causing the XOR driver to fail in using the XOR
engines.

By setting those registers to 0 during the driver initialization, we
ensure that the registers are configured according with the driver
operation model.

Thanks to Lior Amsalem <alior@marvell.com> for his help in debugging
this problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

The armada_cfg_base() function returns the base address of the
registers that allow to configure the decoding for a particular
address window. On Armada 370/XP, the lower windows have more
configuration registers (4 registers) than the higher windows (2
registers). This armada_cfg_base() takes this into account by doing a
different offset calculation depending on the window number, but this
offset calculation was wrong for the higher windows.

Even though we were not using high window numbers until now (only
window 0 is used to map the BootROM, needed for SMP), we use this
function at boot time to disable all windows to ensure that nothing
remains intialized from what the bootloader has done.

Unfortunately, the U-Boot on the OpenBlocks AX3-4 uses a window with a
high number (above 8) to remap the BootROM. And then when the kernel
boots, it remaps the BootROM in window 0. Normally, this is not a
problem, because all windows have previously been disabled. Except
that due to our wrong offset calculation, the windows with high
numbers were not properly disabled, leading to the BootROM being
mapped twice. The visible result of this bug was that the kernel was
unable to get the second CPU started on the OpenBlocks AX3-4
platform. With this fix, all windows are properly cleared at boot
time, the BootROM is remapped only once in window 0, and the second
CPU boots fine.

Thanks a lot to Lior Amsamlen <alior@marvell.com> for his help in
debugging this problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Strictly speaking, this bug was introduced in 3.7, but since the only
platforms supported in 3.7 were Armada 370 and Armada XP, and there
was anyway no SMP support at this time, it isn't really worth the
effort to push this patch in 3.7.

Merge tag 'marvell-armadaxp-smp-for-3.8' of github.com:MISL-EBU-System-SW/mainline-public into mevbu-dt-additions

SMP support for Armada XP

The purpose of this series is to add the SMP support for the Armada XP
SoCs. Beside the SMP support itself brought by the last 3 commits,
this series also adds the support for the coherency fabric unit and
the power management service unit.

The coherency fabric is responsible for ensuring hardware coherency
between all CPUs and between CPUs and I/O masters. This unit is also
available for Armada 370 and will be used in an incoming patch set
for hardware I/O cache coherency.

The power management service unit is responsible for powering down and
waking up CPUs and other SOC units.

Conflicts:
	arch/arm/mach-mvebu/armada-370-xp.c

Merge tag 'marvell-openblocks-i2c-sata-for-3.8' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

Marvell SATA and I2C enabling for OpenBlocks AX3-4

Now that we have support for the I2C busses on Armada 370/XP, and
support for the RTC on the OpenBlocks AX3-4 platform, include the
necessary options in mvebu_defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

This patch enables SATA support on the OpenBlocks AX3-4. It has one
internal SATA port, and an external eSATA port.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

The OpenBlocks AX3-4 has a Seiko Instruments S-35390A as the RTC
controller.  This patch enables this RTC device in the OpenBlocks
AX3-4 Device Tree.

[Thomas Petazzoni: updated with other OpenBlocks changes, rephrased
commit log.]
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

The OpenBlocks AX3-4 board, based on the Armada XP SoC, has an I2C
bus. This patch enables this bus and sets the clock frequency of the
bus.

[Thomas Petazzoni: updated with other changes on OpenBlocks, rephrased
commit log.]
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

The Armada 370 and Armada XP have the same I2C controllers as previous
Marvell SoCs, so the existing mv64xxx-i2c driver works fine.

[Thomas Petazzoni: updated on top of other Armada 370/XP changes,
rephrased the commit log].
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Merge tag 'marvell-hwiocc-for-3.8' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

Add hardware I/O coherency support for Armada 370/XP

The purpose of this patch set is to add hardware I/O Coherency support
for Armada 370 and Armada XP. Theses SoCs come with an unit called
coherency fabric. A beginning of the support for this unit have been
introduced with the SMP patch set. This series extend this support:
the coherency fabric unit allows to use the Armada XP and the Armada
370 as nearly coherent architectures.

The third patches enables this new feature and register our own set
of DMA ops, to benefit this hardware enhancement.

The first patches exports a dma operation function needed to register
our own set of dma ops.

The second patch introduces a new flag for the address decoding
configuration in order to be able to set the memory windows as
shared memory.

Merge tag 'marvell-armadaxp-smp-for-3.8' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

SMP support for Armada XP

The purpose of this series is to add the SMP support for the Armada XP
SoCs. Beside the SMP support itself brought by the last 3 commits,
this series also adds the support for the coherency fabric unit and
the power management service unit.

The coherency fabric is responsible for ensuring hardware coherency
between all CPUs and between CPUs and I/O masters. This unit is also
available for Armada 370 and will be used in an incoming patch set
for hardware I/O cache coherency.

The power management service unit is responsible for powering down and
waking up CPUs and other SOC units.

Merge tag 'marvell-net-xor-defconfig-for-3.8' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

Marvell mvebu defconfig updates for 3.8

Conflicts:
	arch/arm/configs/mvebu_defconfig

Merge tag 'marvell-xor-board-dt-changes-3.8-v2' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

Marvell XOR driver DT changes for 3.8

Conflicts:
	arch/arm/boot/dts/armada-xp.dtsi

Merge tag 'marvell-xor-cleanup-dt-binding-3.8' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

Marvell XOR driver cleanup and DT binding for 3.8

Merge tag 'marvell-neta-dt-clk-updates-3.8' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

Marvell Ethernet DT update for clk support

Merge tag 'marvell-mvneta-fix-and-clk-support-3.8' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

Marvell Ethernet driver fix + clk support

Merge tag 'marvell-net-mdio-checkpatch-fixes-3.8' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

Marvell network/MDIO driver checkpatch fixes

Merge tag 'marvell-boards-net-for-3.8' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

Marvell boards changes related to Ethernet, for 3.8

Conflicts:
	arch/arm/boot/dts/armada-370-xp.dtsi
	arch/arm/boot/dts/armada-xp-db.dts

Merge tag 'marvell-neta-for-3.8' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

Marvell mvneta network driver, for 3.8

Merge tag 'marvell-sata-3.8' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

Marvell Armada 370/XP support for 3.8

Merge tag 'marvell-mvebu-clk-3.8' of git://github.com/MISL-EBU-System-SW/mainline-public into mvebu/everything

Marvell MVEBU clk support, for 3.8

Armada 370 and XP come with an unit called coherency fabric. This unit
allows to use the Armada 370/XP as a nearly coherent architecture. The
coherency mechanism uses snoop filters to ensure the coherency between
caches, DRAM and devices. This mechanism needs a synchronization
barrier which guarantees that all the memory writes initiated by the
devices have reached their target and do not reside in intermediate
write buffers. That's why the architecture is not totally coherent and
we need to provide our own functions for some DMA operations.

Beside the use of the coherency fabric, the device units will have to
set the attribute flag of the decoding address window to select the
accurate coherency process for the memory transaction. This is done
each device driver programs the DRAM address windows. The value of the
attribute set by the driver is retrieved through the
orion_addr_map_cfg struct filled during the early initialization of
the platform.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Yehuda Yitschak <yehuday@marvell.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>

Recent SoC such as Armada 370/XP came with the possibility to deal
with the I/O coherency by hardware. In this case the transaction
attribute of the window must be flagged as "Shared transaction". Once
this flag is set, then the transactions will be forced to be sent
through the coherency block, in other case transaction is driven
directly to DRAM.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Yehuda Yitschak <yehuday@marvell.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Expose another DMA operations function: arm_dma_set_mask. This
function will be added to a custom DMA ops for Armada 370/XP.
Depending of its configuration Armada 370/XP can be set as a "nearly"
coherent architecture. In this case the DMA ops is made of:
- specific functions for this architecture
- already exposed arm DMA related functions
- the arm_dma_set_mask which was not exposed yet.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>

This enables SMP support on the Armada XP processor. It adds the
mandatory functions to support SMP such as: the SMP initialization
functions in platsmp.c, the secondary CPU entry point in headsmp.S and
the CPU hotplug initial support in hotplug.c.
Signed-off-by: Yehuda Yitschak <yehuday@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>

PJ4B is an implementation of the ARMv7 (such as the Cortex A9 for
example) released by Marvell. This CPU is currently found in
Armada 370 and Armada XP SoCs. This patch provides a support for the
specific initialization of this CPU.
Signed-off-by: Yehuda Yitschak <yehuday@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>

This patch enhances the IRQ controller driver to add support for
Inter-Processor-Interrupts that are needed to enable SMP support.
Signed-off-by: Yehuda Yitschak <yehuday@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

The Armada 370 and Armada XP SOCs have a power management service unit
which is responsible for powering down and waking up CPUs and other
SOC units. This patch adds support for this unit.
Signed-off-by: Yehuda Yitschak <yehuday@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

The Armada 370 and Armada XP SOCs have a coherency fabric unit which
is responsible for ensuring hardware coherency between all CPUs and
between CPUs and I/O masters. This patch provides the basic support
needed for SMP.
Signed-off-by: Yehuda Yitschak <yehuday@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>

Merge tag 'marvell-net-xor-defconfig-for-3.8' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell mvebu defconfig updates for 3.8

Conflicts:
	arch/arm/configs/mvebu_defconfig
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Merge tag 'marvell-xor-board-dt-changes-3.8-v2' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell XOR driver DT changes for 3.8

Conflicts:
	arch/arm/boot/dts/armada-xp.dtsi
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Merge tag 'marvell-xor-cleanup-dt-binding-3.8' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell XOR driver cleanup and DT binding for 3.8

Merge tag 'marvell-neta-dt-clk-updates-3.8' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell Ethernet DT update for clk support

Merge tag 'marvell-mvneta-fix-and-clk-support-3.8' of github.com:MISL-EBU-System-SW/mainline-public into test-the-merge

Marvell Ethernet driver fix + clk support