- 24 Aug, 2018 40 commits
-
-
Dan Carpenter authored
[ Upstream commit 5fc853cc ] We accidentally left out the error handling for kstrtoul(). Fixes: a520030e ("qlcnic: Implement flash sysfs callback for 83xx adapter") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Willem de Bruijn authored
[ Upstream commit 993675a3 ] If variable length link layer headers result in a packet shorter than dev->hard_header_len, reset the network header offset. Else skb->mac_len may exceed skb->len after skb_mac_reset_len. packet_sendmsg_spkt already has similar logic. Fixes: b84bbaf7 ("packet: in packet_snd start writing at link layer allocation") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Laura Abbott authored
[ Upstream commit 8b247a92 ] The final link of fixdep uses LDFLAGS but not the existing HOSTLDFLAGS. Fix this. Signed-off-by:
Laura Abbott <labbott@redhat.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Alexander Duyck authored
[ Upstream commit d14c780c ] This change makes it so that we are much more explicit about the ordering of updates to the receive address register (RAR) table. Prior to this patch I believe we may have been updating the table while entries were still active, or possibly allowing for reordering of things since we weren't explicitly flushing writes to either the lower or upper portion of the register prior to accessing the other half. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by:
Shannon Nelson <shannon.nelson@oracle.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Adam Ford authored
[ Upstream commit 92384741 ] The AM3517 has a different OTG controller location than the OMAP3, which is included from omap3.dtsi. This results in a hwmod error. Since the AM3517 has a different OTG controller address, this patch disabes one that is isn't available. Signed-off-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Nishanth Menon authored
[ Upstream commit 2f8b5b21 ] Call secure services to enable ACTLR[0] (Enable invalidates of BTB with ICIALLU) when branch hardening is enabled for kernel. On GP devices OMAP5/DRA7, there is no possibility to update secure side since "secure world" is ROM and there are no override mechanisms possible. On HS devices, appropriate PPA should do the workarounds as well. However, the configuration is only done for secondary core, since it is expected that firmware/bootloader will have enabled the required configuration for the primary boot core (note: bootloaders typically will NOT enable secondary processors, since it has no need to do so). Signed-off-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
[ Upstream commit b4c7e2bd ] Dynamic ftrace requires modifying the code segments that are usually set to read-only. To do this, a per arch function is called both before and after the ftrace modifications are performed. The "before" function will set kernel code text to read-write to allow for ftrace to make the modifications, and the "after" function will set the kernel code text back to "read-only" to keep the kernel code text protected. The issue happens when dynamic ftrace is tested at boot up. The test is done before the kernel code text has been set to read-only. But the "before" and "after" calls are still performed. The "after" call will change the kernel code text to read-only prematurely, and other boot code that expects this code to be read-write will fail. The solution is to add a variable that is set when the kernel code text is expected to be converted to read-only, and make the ftrace "before" and "after" calls do nothing if that variable is not yet set. This is similar to the x86 solution from commit 16239630 ("ftrace, x86: make kernel text writable only for conversions"). Link: http://lkml.kernel.org/r/20180620212906.24b7b66e@vmware.local.homeReported-by:
Stefan Agner <stefan@agner.ch> Tested-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Kamal Heib authored
[ Upstream commit d63c4673 ] Fix memory leak in the error path of mlx5_ib_create_srq() by making sure to free the allocated srq. Fixes: c2b37f76 ("IB/mlx5: Fix integer overflows in mlx5_ib_create_srq") Signed-off-by:
Kamal Heib <kamalheib1@gmail.com> Acked-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Dave Jiang authored
[ Upstream commit ee6581ce ] Incremental patch to fix the unchecked dereference in acpi_nfit_ctl. Reported by Dan Carpenter: "acpi/nfit: fix cmd_rc for acpi_nfit_ctl to always return a value" from Jun 28, 2018, leads to the following Smatch complaint: drivers/acpi/nfit/core.c:578 acpi_nfit_ctl() warn: variable dereferenced before check 'cmd_rc' (see line 411) drivers/acpi/nfit/core.c 410 411 *cmd_rc = -EINVAL; ^^^^^^^^^^^^^^^^^^ Patch adds unchecked dereference. Fixes: c1985cef ("acpi/nfit: fix cmd_rc for acpi_nfit_ctl to always return a value") Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Signed-off-by:
-
Kim Phillips authored
[ Upstream commit f6432b9f ] Like system(), popen() calls /bin/sh, which may/may not be bash. Script when run on dash and encounters the line, yields: exit: Illegal number: -1 checkbashisms report on script content: possible bashism (exit|return with negative status code): exit -1 Remove the bashism and use the more portable non-zero failure status code 1. Signed-off-by:
Kim Phillips <kim.phillips@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan@linux.vnet.ibm.com> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20180629124652.8d0af7e2281fd3fd8262cacc@arm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Vikas Gupta authored
[ Upstream commit c58387ab ] Fix bug in the error code path when bnxt_request_irq() returns failure. bnxt_disable_napi() should not be called in this error path because NAPI has not been enabled yet. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit 78f058a4 ] The current code returns -ENOMEM and does not bother to set the output parameters to 0 when no rings are available. Some callers, such as bnxt_get_channels() will display garbage ring numbers when that happens. Fix it by always setting the output parameters. Fixes: 6e6c5a57 ("bnxt_en: Modify bnxt_get_max_rings() to support shared or non shared rings.") Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit e8708786 ] This is used in configs lacking hardware atomics to emulate atomic r-m-w for user space, implemented by disabling preemption in kernel. However there are issues in current implementation: 1. Process not terminated if invalid user pointer passed: i.e. __get_user() failed. 2. The reason for this patch was __put_user() failure not being handled either, specifically for the COW break scenario. The zero page is initially wired up and read from __get_user() succeeds. A subsequent write by __put_user() induces a Protection Violation, but COW can't finish as Linux page fault handler is disabled due to preempt disable. And what's worse is we silently return the stale value to user space. Fix this specific case by re-enabling preemption and explicitly fixing up the fault and retrying the whole sequence over. Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-arch@vger.kernel.org Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> [vgupta: rewrote the changelog] Signed-off-by:
-
Andrey Ryabinin authored
[ Upstream commit 2045cdfa ] Loading the nf_conntrack module with doubled hashsize parameter, i.e. modprobe nf_conntrack hashsize=12345 hashsize=12345 causes NULL-ptr deref. If 'hashsize' specified twice, the nf_conntrack_set_hashsize() function will be called also twice. The first nf_conntrack_set_hashsize() call will set the 'nf_conntrack_htable_size' variable: nf_conntrack_set_hashsize() ... /* On boot, we can set this without any fancy locking. */ if (!nf_conntrack_htable_size) return param_set_uint(val, kp); But on the second invocation, the nf_conntrack_htable_size is already set, so the nf_conntrack_set_hashsize() will take a different path and call the nf_conntrack_hash_resize() function. Which will crash on the attempt to dereference 'nf_conntrack_hash' pointer: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: 0010:nf_conntrack_hash_resize+0x255/0x490 [nf_conntrack] Call Trace: nf_conntrack_set_hashsize+0xcd/0x100 [nf_conntrack] parse_args+0x1f9/0x5a0 load_module+0x1281/0x1a50 __se_sys_finit_module+0xbe/0xf0 do_syscall_64+0x7c/0x390 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix this, by checking !nf_conntrack_hash instead of !nf_conntrack_htable_size. nf_conntrack_hash will be initialized only after the module loaded, so the second invocation of the nf_conntrack_set_hashsize() won't crash, it will just reinitialize nf_conntrack_htable_size again. Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Russell King authored
[ Upstream commit d378859a ] The colorkey mode property was not correctly disabling the colorkeying when "disabled" mode was selected. Arrange for this to work as one would expect. Signed-off-by:
-
Stefan Schmidt authored
[ Upstream commit 8f2fbc6c ] The check is valid but it does not warrant to crash the kernel. A WARN_ON() is good enough here. Found by checkpatch. Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Stefan Schmidt authored
[ Upstream commit 8a81388e ] Instead of having the function name hard-coded (it might change and we forgot to update them in the debug output) we can use __func__ instead and also shorter the line so we do not need to break it. Also fix an extra blank line while being here. Found by checkpatch. Signed-off-by:
-
Stefan Schmidt authored
[ Upstream commit 20f33045 ] The check is valid but it does not warrant to crash the kernel. A WARN_ON() is good enough here. Found by checkpatch. Signed-off-by:
-
Davide Caratti authored
[ Upstream commit 38230a3e ] the control action in the common member of struct tcf_tunnel_key must be a valid value, as it can contain the chain index when 'goto chain' is used. Ensure that the control action can be read as x->tcfa_action, when x is a pointer to struct tc_action and x->ops->type is TCA_ACT_TUNNEL_KEY, to prevent the following command: # tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ > $tcflags dst_mac $h2mac action tunnel_key unset goto chain 1 from causing a NULL dereference when a matching packet is received: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 80000001097ac067 P4D 80000001097ac067 PUD 103b0a067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 3491 Comm: mausezahn Tainted: G E 4.18.0-rc2.auguri+ #421 Hardware name: Hewlett-Packard HP Z220 CMT Workstation/1790, BIOS K51 v01.58 02/07/2013 RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffff95145ea03c40 EFLAGS: 00010246 RAX: 0000000020000001 RBX: ffff9514499e5800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000 RBP: ffff95145ea03e60 R08: 0000000000000000 R09: ffff95145ea03c9c R10: ffff95145ea03c78 R11: 0000000000000008 R12: ffff951456a69800 R13: ffff951456a69808 R14: 0000000000000001 R15: ffff95144965ee40 FS: 00007fd67ee11740(0000) GS:ffff95145ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001038a2006 CR4: 00000000001606f0 Call Trace: <IRQ> fl_classify+0x1ad/0x1c0 [cls_flower] ? __update_load_avg_se.isra.47+0x1ca/0x1d0 ? __update_load_avg_se.isra.47+0x1ca/0x1d0 ? update_load_avg+0x665/0x690 ? update_load_avg+0x665/0x690 ? kmem_cache_alloc+0x38/0x1c0 tcf_classify+0x89/0x140 __netif_receive_skb_core+0x5ea/0xb70 ? enqueue_entity+0xd0/0x270 ? process_backlog+0x97/0x150 process_backlog+0x97/0x150 net_rx_action+0x14b/0x3e0 __do_softirq+0xde/0x2b4 do_softirq_own_stack+0x2a/0x40 </IRQ> do_softirq.part.18+0x49/0x50 __local_bh_enable_ip+0x49/0x50 __dev_queue_xmit+0x4ab/0x8a0 ? wait_woken+0x80/0x80 ? packet_sendmsg+0x38f/0x810 ? __dev_queue_xmit+0x8a0/0x8a0 packet_sendmsg+0x38f/0x810 sock_sendmsg+0x36/0x40 __sys_sendto+0x10e/0x140 ? do_vfs_ioctl+0xa4/0x630 ? syscall_trace_enter+0x1df/0x2e0 ? __audit_syscall_exit+0x22a/0x290 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fd67e18dc93 Code: 48 8b 0d 18 83 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 59 c7 20 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 2b f7 ff ff 48 89 04 24 RSP: 002b:00007ffe0189b748 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00000000020ca010 RCX: 00007fd67e18dc93 RDX: 0000000000000062 RSI: 00000000020ca322 RDI: 0000000000000003 RBP: 00007ffe0189b780 R08: 00007ffe0189b760 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000062 R13: 00000000020ca322 R14: 00007ffe0189b760 R15: 0000000000000003 Modules linked in: act_tunnel_key act_gact cls_flower sch_ingress vrf veth act_csum(E) xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter intel_rapl snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic kvm_intel kvm irqbypass snd_hda_intel crct10dif_pclmul crc32_pclmul hp_wmi ghash_clmulni_intel pcbc snd_hda_codec aesni_intel sparse_keymap rfkill snd_hda_core snd_hwdep snd_seq crypto_simd iTCO_wdt gpio_ich iTCO_vendor_support wmi_bmof cryptd mei_wdt glue_helper snd_seq_device snd_pcm pcspkr snd_timer snd i2c_i801 lpc_ich sg soundcore wmi mei_me mei ie31200_edac nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod sr_mod cdrom i915 video i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ahci crc32c_intel libahci serio_raw sfc libata mtd drm ixgbe mdio i2c_core e1000e dca CR2: 0000000000000000 ---[ end trace 1ab8b5b5d4639dfc ]--- RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffff95145ea03c40 EFLAGS: 00010246 RAX: 0000000020000001 RBX: ffff9514499e5800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000 RBP: ffff95145ea03e60 R08: 0000000000000000 R09: ffff95145ea03c9c R10: ffff95145ea03c78 R11: 0000000000000008 R12: ffff951456a69800 R13: ffff951456a69808 R14: 0000000000000001 R15: ffff95144965ee40 FS: 00007fd67ee11740(0000) GS:ffff95145ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001038a2006 CR4: 00000000001606f0 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x11400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: d0f6dd8a ("net/sched: Introduce act_tunnel_key") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Daniel Mack authored
[ Upstream commit 0c1049dc ] PXA3xx platforms have 56 interrupts that are stored in two ICMR registers. The code in pxa_irq_suspend() and pxa_irq_resume() however does a simple division by 32 which only leads to one register being saved at suspend and restored at resume time. The NAND interrupt setting, for instance, is lost. Fix this by using DIV_ROUND_UP() instead. Signed-off-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Vladimir Zapolskiy authored
[ Upstream commit 05925e52 ] The change fixes sleep in atomic context bug, which is encountered every time when link settings are changed by ethtool. Since commit 35b5f6b1 ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however that helper function is called in atomic context under a grabbed spinlock, because phy_start_aneg() is called by phy_ethtool_ksettings_set() and by replaced phy_ethtool_sset() helpers from phylib. Now duplex mode setting is enforced in ravb_adjust_link() only, also now RX/TX is disabled when link is put down or modifications to E-MAC registers ECMR and GECMR are expected for both cases of checked and ignored link status pin state from E-MAC interrupt handler. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by:
Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Vladimir Zapolskiy authored
[ Upstream commit 0973a4dd ] Since commit 35b5f6b1 ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however the helper function is called in atomic context. The bug can be reproduced by running "ethtool -r" command, the bug is reported if CONFIG_DEBUG_ATOMIC_SLEEP build option is enabled. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by:
-
Vladimir Zapolskiy authored
[ Upstream commit 5cb3f52a ] The change fixes sleep in atomic context bug, which is encountered every time when link settings are changed by ethtool. Since commit 35b5f6b1 ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however that helper function is called in atomic context under a grabbed spinlock, because phy_start_aneg() is called by phy_ethtool_ksettings_set() and by replaced phy_ethtool_sset() helpers from phylib. Now duplex mode setting is enforced in sh_eth_adjust_link() only, also now RX/TX is disabled when link is put down or modifications to E-MAC registers ECMR and GECMR are expected for both cases of checked and ignored link status pin state from E-MAC interrupt handler. For reference the change is a partial rework of commit 1e1b812b ("sh_eth: fix handling of no LINK signal"). Fixes: dc19e4e5 ("sh: sh_eth: Add support ethtool") Signed-off-by:
-
Vladimir Zapolskiy authored
[ Upstream commit 53a710b5 ] Since commit 35b5f6b1 ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however the helper function is called in atomic context. The bug can be reproduced by running "ethtool -r" command, the bug is reported if CONFIG_DEBUG_ATOMIC_SLEEP build option is enabled. Fixes: dc19e4e5 ("sh: sh_eth: Add support ethtool") Signed-off-by:
-
Arun Kumar Neelakantam authored
[ Upstream commit fdf5fd39 ] The broadcast node id should only be sent with the control port id. Signed-off-by:
Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by:
-
Paul Moore authored
[ Upstream commit a9ba23d4 ] At present the ipv6_renew_options_kern() function ends up calling into access_ok() which is problematic if done from inside an interrupt as access_ok() calls WARN_ON_IN_IRQ() on some (all?) architectures (x86-64 is affected). Example warning/backtrace is shown below: WARNING: CPU: 1 PID: 3144 at lib/usercopy.c:11 _copy_from_user+0x85/0x90 ... Call Trace: <IRQ> ipv6_renew_option+0xb2/0xf0 ipv6_renew_options+0x26a/0x340 ipv6_renew_options_kern+0x2c/0x40 calipso_req_setattr+0x72/0xe0 netlbl_req_setattr+0x126/0x1b0 selinux_netlbl_inet_conn_request+0x80/0x100 selinux_inet_conn_request+0x6d/0xb0 security_inet_conn_request+0x32/0x50 tcp_conn_request+0x35f/0xe00 ? __lock_acquire+0x250/0x16c0 ? selinux_socket_sock_rcv_skb+0x1ae/0x210 ? tcp_rcv_state_process+0x289/0x106b tcp_rcv_state_process+0x289/0x106b ? tcp_v6_do_rcv+0x1a7/0x3c0 tcp_v6_do_rcv+0x1a7/0x3c0 tcp_v6_rcv+0xc82/0xcf0 ip6_input_finish+0x10d/0x690 ip6_input+0x45/0x1e0 ? ip6_rcv_finish+0x1d0/0x1d0 ipv6_rcv+0x32b/0x880 ? ip6_make_skb+0x1e0/0x1e0 __netif_receive_skb_core+0x6f2/0xdf0 ? process_backlog+0x85/0x250 ? process_backlog+0x85/0x250 ? process_backlog+0xec/0x250 process_backlog+0xec/0x250 net_rx_action+0x153/0x480 __do_softirq+0xd9/0x4f7 do_softirq_own_stack+0x2a/0x40 </IRQ> ... While not present in the backtrace, ipv6_renew_option() ends up calling access_ok() via the following chain: access_ok() _copy_from_user() copy_from_user() ipv6_renew_option() The fix presented in this patch is to perform the userspace copy earlier in the call chain such that it is only called when the option data is actually coming from userspace; that place is do_ipv6_setsockopt(). Not only does this solve the problem seen in the backtrace above, it also allows us to simplify the code quite a bit by removing ipv6_renew_options_kern() completely. We also take this opportunity to cleanup ipv6_renew_options()/ipv6_renew_option() a small amount as well. This patch is heavily based on a rough patch by Al Viro. I've taken his original patch, converted a kmemdup() call in do_ipv6_setsockopt() to a memdup_user() call, made better use of the e_inval jump target in the same function, and cleaned up the use ipv6_renew_option() by ipv6_renew_options(). CC: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit d376bef9 ] nft_compat relies on xt_request_find_match to increment refcount of the module that provides the match/target. The (builtin) icmp matches did't set the module owner so it was possible to rmmod ip(6)tables while icmp extensions were still in use. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Lubomir Rintel authored
[ Upstream commit b30c122c ] Otherwise NetworkManager (and iproute alike) is not able to identify the parent IEEE 802.15.4 interface of a 6LoWPAN link. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Acked-by:
Alexander Aring <aring@mojatatu.com> Signed-off-by:
-
Taeung Song authored
[ Upstream commit 02a2f000 ] test_task_rename() and test_urandom_read() can be failed during write() and read(), So check the result of them. Reviewed-by:
David Laight <David.Laight@ACULAB.COM> Signed-off-by:
Taeung Song <treeze.taeung@gmail.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Taeung Song authored
[ Upstream commit 4d5d33a0 ] This fixes build error regarding redefinition: CLANG-bpf samples/bpf/parse_varlen.o samples/bpf/parse_varlen.c:111:8: error: redefinition of 'vlan_hdr' struct vlan_hdr { ^ ./include/linux/if_vlan.h:38:8: note: previous definition is here So remove duplicate 'struct vlan_hdr' in sample code and include if_vlan.h Signed-off-by:
-
Yuiko Oshino authored
[ Upstream commit d461e3da ] In certain conditions, the device may not be able to link in gigabit mode. This software workaround ensures that the device will not enter the failure state. Fixes: d0cad871 ("SMSC75XX USB 2.0 Gigabit Ethernet Devices") Signed-off-by:
Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by:
-
Zhen Lei authored
[ Upstream commit 1e8e18f6 ] There is a special case that the size is "(N << KASAN_SHADOW_SCALE_SHIFT) Pages plus X", the value of X is [1, KASAN_SHADOW_SCALE_SIZE-1]. The operation "size >> KASAN_SHADOW_SCALE_SHIFT" will drop X, and the roundup operation can not retrieve the missed one page. For example: size=0x28006, PAGE_SIZE=0x1000, KASAN_SHADOW_SCALE_SHIFT=3, we will get shadow_size=0x5000, but actually we need 6 pages. shadow_size = round_up(size >> KASAN_SHADOW_SCALE_SHIFT, PAGE_SIZE); This can lead to a kernel crash when kasan is enabled and the value of mod->core_layout.size or mod->init_layout.size is like above. Because the shadow memory of X has not been allocated and mapped. move_module: ptr = module_alloc(mod->core_layout.size); ... memset(ptr, 0, mod->core_layout.size); //crashed Unable to handle kernel paging request at virtual address ffff0fffff97b000 ...... Call trace: __asan_storeN+0x174/0x1a8 memset+0x24/0x48 layout_and_allocate+0xcd8/0x1800 load_module+0x190/0x23e8 SyS_finit_module+0x148/0x180 Link: http://lkml.kernel.org/r/1529659626-12660-1-git-send-email-thunder.leizhen@huawei.comSigned-off-by:
Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by:
Dmitriy Vyukov <dvyukov@google.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mathieu Malaterre authored
[ Upstream commit 26b68dd2 ] Silence warnings (triggered at W=1) by adding relevant __printf attributes. CC kernel/trace/trace.o kernel/trace/trace.c: In function ‘__trace_array_vprintk’: kernel/trace/trace.c:2979:2: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] len = vscnprintf(tbuffer, TRACE_BUF_SIZE, fmt, args); ^~~ AR kernel/trace/built-in.o Link: http://lkml.kernel.org/r/20180308205843.27447-1-malat@debian.orgSigned-off-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
-
Fabio Estevam authored
[ Upstream commit 2ceb2780 ] Select CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS so that USB ULPI can be functional on some boards like that use ULPI interface. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Fabio Estevam authored
[ Upstream commit 157bcc06 ] Select CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS so that USB ULPI can be functional on some boards like imx51-babbge. This fixes a kernel hang in 4.18-rc1 on i.mx51-babbage, caused by commit 03e6275a ("usb: chipidea: Fix ULPI on imx51"). Suggested-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by:
-
Jason Gerecke authored
[ Upstream commit 3b8d5735 ] The touch sensors on the 2nd-gen Intuos tablets don't use a 4096x4096 sensor like other similar tablets (3rd-gen Bamboo, Intuos5, etc.). The incorrect maximum XY values don't normally affect userspace since touch input from these devices is typically relative rather than absolute. It does, however, cause problems when absolute distances need to be measured, e.g. for gesture recognition. Since the resolution of the touch sensor on these devices is 10 units / mm (versus 100 for the pen sensor), the proper maximum values can be calculated by simply dividing by 10. Fixes: b5fd2a3e ("Input: wacom - add support for three new Intuos devices") Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 5dc2d399 ] After we change the ipvlan mode from l3 to l2, or vice versa, we only reset IFF_NOARP flag, but don't flush the ARP table cache, which will cause eth->h_dest to be equal to eth->h_source in ipvlan_xmit_mode_l2(). Then the message will not come out of host. Here is the reproducer on local host: ip link set eth1 up ip addr add 192.168.1.1/24 dev eth1 ip link add link eth1 ipvlan1 type ipvlan mode l3 ip netns add net1 ip link set ipvlan1 netns net1 ip netns exec net1 ip link set ipvlan1 up ip netns exec net1 ip addr add 192.168.2.1/24 dev ipvlan1 ip route add 192.168.2.0/24 via 192.168.1.2 ping 192.168.2.2 -c 2 ip netns exec net1 ip link set ipvlan1 type ipvlan mode l2 ping 192.168.2.2 -c 2 Add the same configuration on remote host. After we set the mode to l2, we could find that the src/dst MAC addresses are the same on eth1: 21:26:06.648565 00:b7:13:ad:d3:05 > 00:b7:13:ad:d3:05, ethertype IPv4 (0x0800), length 98: (tos 0x0, ttl 64, id 58356, offset 0, flags [DF], proto ICMP (1), length 84) 192.168.2.1 > 192.168.2.2: ICMP echo request, id 22686, seq 1, length 64 Fix this by calling dev_change_flags(), which will call netdevice notifier with flag change info. v2: a) As pointed out by Wang Cong, check return value for dev_change_flags() when change dev flags. b) As suggested by Stefano and Sabrina, move flags setting before l3mdev_ops. So we don't need to redo ipvlan_{, un}register_nf_hook() again in err path. Reported-by:
Jianlin Shi <jishi@redhat.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Josh Poimboeuf authored
[ Upstream commit 08b393d0 ] Since the following commit: cd77849a ("objtool: Fix GCC 8 cold subfunction detection for aliased functions") ... if the kernel is built with EXTRA_CFLAGS='-fno-reorder-functions', objtool can get stuck in an infinite loop. That flag causes the new GCC 8 cold subfunctions to be placed in .text instead of .text.unlikely. But it also has an unfortunate quirk: in the symbol table, the subfunction (e.g., nmi_panic.cold.7) is nested inside the parent (nmi_panic). That function overlap confuses objtool, and causes it to get into an infinite loop in next_insn_same_func(). Here's Allan's description of the loop: "Objtool iterates through the instructions in nmi_panic using next_insn_same_func. Once it reaches the end of nmi_panic at 0x534 it jumps to 0x528 as that's the start of nmi_panic.cold.7. However, since the instructions starting at 0x528 are still associated with nmi_panic objtool will get stuck in a loop, continually jumping back to 0x528 after reaching 0x534." Fix it by shortening the length of the parent function so that the functions no longer overlap. Reported-and-analyzed-by:
Allan Xavier <allan.x.xavier@oracle.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Allan Xavier <allan.x.xavier@oracle.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/9e704c52bee651129b036be14feda317ae5606ae.1530136978.git.jpoimboe@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Greg Ungerer authored
[ Upstream commit ecd60532 ] Booting a ColdFire m68k core with MMU enabled causes a "bad page state" oops since commit 1d40a5ea ("mm: mark pages in use for page tables"): BUG: Bad page state in process sh pfn:01ce2 page:004fefc8 count:0 mapcount:-1024 mapping:00000000 index:0x0 flags: 0x0() raw: 00000000 00000000 00000000 fffffbff 00000000 00000100 00000200 00000000 raw: 039c4000 page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 22 Comm: sh Not tainted 4.17.0-07461-g1d40a5ea #13 Fix by calling pgtable_page_dtor() in our __pte_free_tlb() code path, so that the PG_table flag is cleared before we free the pte page. Note that I had to change the type of pte_free() to be static from extern. Otherwise you get a lot of warnings like this: ./arch/m68k/include/asm/mcf_pgalloc.h:80:2: warning: ‘pgtable_page_dtor’ is static but used in inline function ‘pte_free’ which is not static pgtable_page_dtor(page); ^ And making it static is consistent with our use of this in the other m68k pgalloc definitions of pte_free(). Signed-off-by:
Greg Ungerer <gerg@linux-m68k.org> CC: Matthew Wilcox <willy@infradead.org> Reviewed-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Dave Jiang authored
[ Upstream commit c1985cef ] cmd_rc is passed in by reference to the acpi_nfit_ctl() function and the caller expects a value returned. However, when the package is pass through via the ND_CMD_CALL command, cmd_rc is not touched. Make sure cmd_rc is always set. Fixes: aef25338 ("libnvdimm, nfit: centralize command status translation") Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
