- 01 Feb, 2023 4 commits
-
-
Maciej Fijalkowski authored
Plan is to move ice_put_rx_buf() to the end of ice_clean_rx_irq() so in order to keep the ability of walking through HW Rx descriptors, pull out next_to_clean handling out of ice_put_rx_buf(). Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/bpf/20230131204506.219292-5-maciej.fijalkowski@intel.com
-
Maciej Fijalkowski authored
This will allow us to avoid carrying additional auxiliary array of page counts when dealing with XDP multi buffer support. Previously combining fragmented frame to skb was not affected in the same way as XDP would be as whole frame is needed to be in place before executing XDP prog. Therefore, when going through HW Rx descriptors one-by-one, calls to ice_put_rx_buf() need to be taken *after* running XDP prog on a potentially multi buffered frame, so some additional storage of page count is needed. By adding page count to rx buf, it will make it easier to walk through processed entries at the end of rx cleaning routine and decide whether or not buffers should be recycled. While at it, bump ice_rx_buf::pagecnt_bias from u16 up to u32. It was proven many times that calculations on variables smaller than standard register size are harmful. This was also the case during experiments with embedding page count to ice_rx_buf - when this was added as u16 it had a performance impact. Signed-off-by:
-
Maciej Fijalkowski authored
In preparation for XDP multi-buffer support, let's store xdp_buff on Rx ring struct. This will allow us to combine fragmented frames across separate NAPI cycles in the same way as currently skb fragments are handled. This means that skb pointer on Rx ring will become redundant and will be removed. For now it is kept and layout of Rx ring struct was not inspected, some member movement will be needed later on so that will be the time to take care of it. Signed-off-by:
-
Maciej Fijalkowski authored
Rx path is going to be modified in a way that fragmented frame will be gathered within xdp_buff in the first place. This approach implies that underlying buffer has to provide tailroom for skb_shared_info. This is currently the case when ring uses build_skb but not when legacy-rx knob is turned on. This case configures 2k Rx buffers and has no way to provide either headroom or tailroom - FWIW it currently has XDP_PACKET_HEADROOM which is broken and in here it is removed. 2k Rx buffers were used so driver in this setting was able to support 9k MTU as it can chain up to 5 Rx buffers. With offset configuring HW writing 2k of a data was passing the half of the page which broke the assumption of our internal page recycling tricks. Now if above got fixed and legacy-rx path would be left as is, when referring to skb_shared_info via xdp_get_shared_info_from_buff(), packet's content would be corrupted again. Hence size of Rx buffer needs to be lowered and therefore supported MTU. This operation will allow us to keep the unified data path and with 8k MTU users (if any of legacy-rx) would still be good to go. However, tendency is to drop the support for this code path at some point. Add ICE_RXBUF_1664 as vsi::rx_buf_len and ICE_MAX_FRAME_LEGACY_RX (8320) as vsi::max_frame for legacy-rx. For bigger page sizes configure 3k Rx buffers, not 2k. Since headroom support is removed, disable data_meta support on legacy-rx. When preparing XDP buff, rely on ice_rx_ring::rx_offset setting when deciding whether to support data_meta or not. Signed-off-by:
-
- 30 Jan, 2023 9 commits
-
-
Alexei Starovoitov authored
Ilya Leoshkevich says: ==================== v2: https://lore.kernel.org/bpf/20230128000650.1516334-1-iii@linux.ibm.com/#t v2 -> v3: - Make __arch_prepare_bpf_trampoline static. (Reported-by: kernel test robot <lkp@intel.com>) - Support both old- and new- style map definitions in sk_assign. (Alexei) - Trim DENYLIST.s390x. (Alexei) - Adjust s390x vmlinux path in vmtest.sh. - Drop merged fixes. v1: https://lore.kernel.org/bpf/20230125213817.1424447-1-iii@linux.ibm.com/#t v1 -> v2: - Fix core_read_macros, sk_assign, test_profiler, test_bpffs (24/31; I'm not quite happy with the fix, but don't have better ideas), and xdp_synproxy. (Andrii) - Prettify liburandom_read and verify_pkcs7_sig fixes. (Andrii) - Fix bpf_usdt_arg using barrier_var(); prettify barrier_var(). (Andrii) - Change BPF_MAX_TRAMP_LINKS to enum and query it using BTF. (Andrii) - Improve bpf_jit_supports_kfunc_call() description. (Alexei) - Always check sign_extend() return value. - Cc: Alexander Gordeev. Hi, This series implements poke, trampoline, kfunc, and mixing subprogs and tailcalls on s390x. The following failures still remain: #82 get_stack_raw_tp:FAIL get_stack_print_output:FAIL:user_stack corrupted user stack Known issue: We cannot reliably unwind userspace on s390x without DWARF. #101 ksyms_module:FAIL address of kernel function bpf_testmod_test_mod_kfunc is out of range Known issue: Kernel and modules are too far away from each other on s390x. #190 stacktrace_build_id:FAIL Known issue: We cannot reliably unwind userspace on s390x without DWARF. #281 xdp_metadata:FAIL See patch 6. None of these seem to be due to the new changes. Best regards, Ilya ==================== Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Ilya Leoshkevich authored
Now that trampoline is implemented, enable a number of tests on s390x. 18 of the remaining failures have to do with either lack of rethook (fixed by [1]) or syscall symbols missing from BTF (fixed by [2]). Do not re-classify the remaining failures for now; wait until the s390/for-next fixes are merged and re-classify only the remaining few. [1] https://git.kernel.org/pub/scm/linux/kernel/git/s390/linux.git/commit/?h=for-next&id=1a280f48c0e403903cf0b4231c95b948e664f25a [2] https://git.kernel.org/pub/scm/linux/kernel/git/s390/linux.git/commit/?h=for-next&id=2213d44e140f979f4b60c3c0f8dd56d151cc8692Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/r/20230129190501.1624747-9-iii@linux.ibm.comSigned-off-by:
-
Ilya Leoshkevich authored
After commit edd4a866 ("s390/boot: get rid of startup archive") there is no more compressed/ subdirectory. Signed-off-by:
-
Ilya Leoshkevich authored
Implement calling kernel functions from eBPF. In general, the eBPF ABI is fairly close to that of s390x, with one important difference: on s390x callers should sign-extend signed arguments. Handle that by using information returned by bpf_jit_find_kfunc_model(). Here is an example of how sign extensions works. Suppose we need to call the following function from BPF: ; long noinline bpf_kfunc_call_test4(signed char a, short b, int c, long d) 0000000000936a78 <bpf_kfunc_call_test4>: 936a78: c0 04 00 00 00 00 jgnop bpf_kfunc_call_test4 ; return (long)a + (long)b + (long)c + d; 936a7e: b9 08 00 45 agr %r4,%r5 936a82: b9 08 00 43 agr %r4,%r3 936a86: b9 08 00 24 agr %r2,%r4 936a8a: c0 f4 00 1e 3b 27 jg <__s390_indirect_jump_r14> As per the s390x ABI, bpf_kfunc_call_test4() has the right to assume that a, b and c are sign-extended by the caller, which results in using 64-bit additions (agr) without any additional conversions. Without sign extension we would have the following on the JITed code side: ; tmp = bpf_kfunc_call_test4(-3, -30, -200, -1000); ; 5: b4 10 00 00 ff ff ff fd w1 = -3 0x3ff7fdcdad4: llilf %r2,0xfffffffd ; 6: b4 20 00 00 ff ff ff e2 w2 = -30 0x3ff7fdcdada: llilf %r3,0xffffffe2 ; 7: b4 30 00 00 ff ff ff 38 w3 = -200 0x3ff7fdcdae0: llilf %r4,0xffffff38 ; 8: b7 40 00 00 ff ff fc 18 r4 = -1000 0x3ff7fdcdae6: lgfi %r5,-1000 0x3ff7fdcdaec: mvc 64(4,%r15),160(%r15) 0x3ff7fdcdaf2: lgrl %r1,bpf_kfunc_call_test4@GOT 0x3ff7fdcdaf8: brasl %r14,__s390_indirect_jump_r1 This first 3 llilfs are 32-bit loads, that need to be sign-extended to 64 bits. Note: at the moment bpf_jit_find_kfunc_model() does not seem to play nicely with XDP metadata functions: add_kfunc_call() adds an "abstract" bpf_*() version to kfunc_btf_tab, but then fixup_kfunc_call() puts the concrete version into insn->imm, which bpf_jit_find_kfunc_model() cannot find. But this seems to be a common code problem. Signed-off-by: -
Ilya Leoshkevich authored
Allow mixing subprogs and tail calls by passing the current tail call count to subprogs. Signed-off-by:
-
Ilya Leoshkevich authored
arch_prepare_bpf_trampoline() is used for direct attachment of eBPF programs to various places, bypassing kprobes. It's responsible for calling a number of eBPF programs before, instead and/or after whatever they are attached to. Add a s390x implementation, paying attention to the following: - Reuse the existing JIT infrastructure, where possible. - Like the existing JIT, prefer making multiple passes instead of backpatching. Currently 2 passes is enough. If literal pool is introduced, this needs to be raised to 3. However, at the moment adding literal pool only makes the code larger. If branch shortening is introduced, the number of passes needs to be increased even further. - Support both regular and ftrace calling conventions, depending on the trampoline flags. - Use expolines for indirect calls. - Handle the mismatch between the eBPF and the s390x ABIs. - Sign-extend fmod_ret return values. invoke_bpf_prog() produces about 120 bytes; it might be possible to slightly optimize this, but reaching 50 bytes, like on x86_64, looks unrealistic: just loading cookie, __bpf_prog_enter, bpf_func, insnsi and __bpf_prog_exit as literals already takes at least 5 * 12 = 60 bytes, and we can't use relative addressing for most of them. Therefore, lower BPF_MAX_TRAMP_LINKS on s390x. Signed-off-by:
-
Ilya Leoshkevich authored
bpf_arch_text_poke() is used to hotpatch eBPF programs and trampolines. s390x has a very strict hotpatching restriction: the only thing that is allowed to be hotpatched is conditional branch mask. Take the same approach as commit de5012b4 ("s390/ftrace: implement hotpatching"): create a conditional jump to a "plt", which loads the target address from memory and jumps to it; then first patch this address, and then the mask. Trampolines (introduced in the next patch) respect the ftrace calling convention: the return address is in %r0, and %r1 is clobbered. With that in mind, bpf_arch_text_poke() does not differentiate between jumps and calls. However, there is a simple optimization for jumps (for the epilogue_ip case): if a jump already points to the destination, then there is no "plt" and we can just flip the mask. For simplicity, the "plt" template is defined in assembly, and its size is used to define C arrays. There doesn't seem to be a way to convey this size to C as a constant, so it's hardcoded and double-checked during runtime. Signed-off-by:
-
Ilya Leoshkevich authored
All the indirect jumps in the eBPF JIT already use expolines, except for the tail call one. Fixes: de5cb6eb ("s390: use expoline thunks in the BPF JIT") Signed-off-by:
-
Ilya Leoshkevich authored
sk_assign is failing on an s390x machine running Debian "bookworm" for 2 reasons: legacy server_map definition and uninitialized addrlen in recvfrom() call. Fix by adding a new-style server_map definition and dropping addrlen (recvfrom() allows NULL values for src_addr and addrlen). Since the test should support tc built without libbpf, build the prog twice: with the old-style definition and with the new-style definition, then select the right one at runtime. This could be done at compile time too, but this would not be cross-compilation friendly. Signed-off-by:
-
- 28 Jan, 2023 27 commits
-
-
Ilya Leoshkevich authored
"desription" should be "description". Signed-off-by:
-
Ilya Leoshkevich authored
s390x eBPF JIT needs to know whether a function return value is signed and which function arguments are signed, in order to generate code compliant with the s390x ABI. Signed-off-by:
-
Ilya Leoshkevich authored
iterators.lskel.h is little-endian, therefore bpf iterator is currently broken on big-endian systems. Introduce a big-endian version and add instructions regarding its generation. Unfortunately bpftool's cross-endianness capabilities are limited to BTF right now, so the procedure requires access to a big-endian machine or a configured emulator. Signed-off-by:
-
Ilya Leoshkevich authored
BPF_PROBE_READ_INTO() and BPF_PROBE_READ_STR_INTO() should map to bpf_probe_read() and bpf_probe_read_str() respectively in order to work correctly on architectures with !ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE. Signed-off-by:
-
Ilya Leoshkevich authored
Loading programs that use bpf_usdt_arg() on s390x fails with: ; if (arg_num >= BPF_USDT_MAX_ARG_CNT || arg_num >= spec->arg_cnt) 128: (79) r1 = *(u64 *)(r10 -24) ; frame1: R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 129: (25) if r1 > 0xb goto pc+83 ; frame1: R1_w=scalar(umax=11,var_off=(0x0; 0xf)) ... ; arg_spec = &spec->args[arg_num]; 135: (79) r1 = *(u64 *)(r10 -24) ; frame1: R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 ... ; switch (arg_spec->arg_type) { 139: (61) r1 = *(u32 *)(r2 +8) R2 unbounded memory access, make sure to bounds check any such access The reason is that, even though the C code enforces that arg_num < BPF_USDT_MAX_ARG_CNT, the verifier cannot propagate this constraint to the arg_spec assignment yet. Help it by forcing r1 back to stack after comparison. Signed-off-by: -
Ilya Leoshkevich authored
Use a single "+r" constraint instead of the separate "=r" and "0". Signed-off-by:
-
Ilya Leoshkevich authored
Use bpf_probe_read_kernel() and bpf_probe_read_kernel_str() instead of bpf_probe_read() and bpf_probe_read_kernel(). Signed-off-by:
-
Ilya Leoshkevich authored
Use the correct datatype for the values map values; currently the test works by accident, since on little-endian machines it is sometimes acceptable to access u64 as u32. Signed-off-by:
-
Ilya Leoshkevich authored
Use a syscall macro to access the nanosleep()'s first argument; currently the code uses gprs[2] instead of orig_gpr2. Signed-off-by:
-
Ilya Leoshkevich authored
s390x cache line size is 256 bytes, so skb_shared_info must be aligned on a much larger boundary than for x86. Signed-off-by:
-
Ilya Leoshkevich authored
Use syscall macros to access the setdomainname() arguments; currently the code uses gprs[2] instead of orig_gpr2 for the first argument. Signed-off-by:
-
Ilya Leoshkevich authored
s390x ABI requires the caller to zero- or sign-extend the arguments. eBPF already deals with zero-extension (by definition of its ABI), but not with sign-extension. Add a test to cover that potentially problematic area. Signed-off-by:
-
Ilya Leoshkevich authored
sizeof(struct bpf_local_storage_elem) is 512 on s390x: struct bpf_local_storage_elem { struct hlist_node map_node; /* 0 16 */ struct hlist_node snode; /* 16 16 */ struct bpf_local_storage * local_storage; /* 32 8 */ struct callback_head rcu __attribute__((__aligned__(8))); /* 40 16 */ /* XXX 200 bytes hole, try to pack */ /* --- cacheline 1 boundary (256 bytes) --- */ struct bpf_local_storage_data sdata __attribute__((__aligned__(256))); /* 256 8 */ /* size: 512, cachelines: 2, members: 5 */ /* sum members: 64, holes: 1, sum holes: 200 */ /* padding: 248 */ /* forced alignments: 2, forced holes: 1, sum forced holes: 200 */ } __attribute__((__aligned__(256))); As the existing comment suggests, use a larger number in order to be future-proof. Signed-off-by: -
Ilya Leoshkevich authored
If stack_mprotect() succeeds, errno is not changed. This can produce misleading error messages, that show stale errno. Signed-off-by:
-
Ilya Leoshkevich authored
Sync the definition of socket_cookie between the eBPF program and the test. Currently the test works by accident, since on little-endian it is sometimes acceptable to access u64 as u32. Signed-off-by:
-
Ilya Leoshkevich authored
s390x cache line size is 256 bytes, so skb_shared_info must be aligned on a much larger boundary than for x86. This makes the maximum packet size smaller. Signed-off-by:
-
Ilya Leoshkevich authored
Use bpf_probe_read_kernel() instead of bpf_probe_read(), which is not defined on all architectures. While at it, improve the error handling: do not hide the verifier log, and check the return values of bpf_probe_read_kernel() and bpf_copy_from_user(). Signed-off-by:
-
Ilya Leoshkevich authored
decap_sanity prints the following on the 1st run: decap_sanity: sh: 1: Syntax error: Bad fd number and the following on the 2nd run: Cannot create namespace file "/run/netns/decap_sanity_ns": File exists The problem is that the cleanup command has a typo and does nothing. Fix the typo. Signed-off-by: -
Ilya Leoshkevich authored
The result of urand_spawn() is checked with ASSERT_OK_PTR, which treats NULL as success if errno == 0. Signed-off-by:
-
Ilya Leoshkevich authored
h_proto is big-endian; use htons() in order to make comparison work on both little- and big-endian machines. Signed-off-by:
-
Ilya Leoshkevich authored
When building with O=, the following error occurs: ln: failed to create symbolic link 'no_alu32/bpftool': No such file or directory Adjust the code to account for $(OUTPUT). Signed-off-by: -
Ilya Leoshkevich authored
When building with O=, the following linker error occurs: clang: error: no such file or directory: 'liburandom_read.so' Fix by adding $(OUTPUT) to the linker search path. Signed-off-by: -
Ilya Leoshkevich authored
Do not hard-code the value, since for s390x it will be smaller than for x86. Signed-off-by:
-
Ilya Leoshkevich authored
This way it's possible to query its value from testcases using BTF. Signed-off-by:
-
Ilya Leoshkevich authored
These functions already check that th_len < sizeof(*th), and propagating the lower bound (th_len > 0) may be challenging in complex code, e.g. as is the case with xdp_synproxy test on s390x [1]. Switch to ARG_CONST_SIZE_OR_ZERO in order to make the verifier accept code where it cannot prove that th_len > 0. [1] https://lore.kernel.org/bpf/CAEf4Bzb3uiSHtUbgVWmkWuJ5Sw1UZd4c_iuS4QXtUkXmTTtXuQ@mail.gmail.com/Signed-off-by:
-
Randy Dunlap authored
Correct spelling problems for Documentation/bpf/ as reported by codespell. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: bpf@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Reviewed-by:
Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20230128195046.13327-1-rdunlap@infradead.orgSigned-off-by:
-
David Vernet authored
The first element of a struct bpf_cpumask is a cpumask_t. This is done to allow struct bpf_cpumask to be cast to a struct cpumask. If this element were ever moved to another field, any BPF program passing a struct bpf_cpumask * to a kfunc expecting a const struct cpumask * would immediately fail to load. Add a build-time assertion so this is assumption is captured and verified. Signed-off-by:
David Vernet <void@manifault.com> Link: https://lore.kernel.org/r/20230128141537.100777-1-void@manifault.comSigned-off-by:
-
