- 09 Mar, 2022 3 commits
-
-
Alexey Kardashevskiy authored
When ld detects unaligned relocations, it emits R_PPC64_UADDR64 relocations instead of R_PPC64_RELATIVE. Currently R_PPC64_UADDR64 are detected by arch/powerpc/tools/relocs_check.sh and expected not to work. Below is a simple chunk to trigger this behaviour (this disables optimization for the demonstration purposes only, this also happens with -O1/-O2 when CONFIG_PRINTK_INDEX=y, for example): \#pragma GCC push_options \#pragma GCC optimize ("O0") struct entry { const char *file; int line; } __attribute__((packed)); static const struct entry e1 = { .file = __FILE__, .line = __LINE__ }; static const struct entry e2 = { .file = __FILE__, .line = __LINE__ }; ... prom_printf("e1=%s %lx %lx\n", e1.file, (unsigned long) e1.file, mfmsr()); prom_printf("e2=%s %lx\n", e2.file, (unsigned long) e2.file); \#pragma GCC pop_options This adds support for UADDR64 for 64bit. This reuses __dynamic_symtab from the 32bit code which supports more relocation types already. Because RELACOUNT includes only R_PPC64_RELATIVE, this replaces it with RELASZ which is the size of all relocation records. Signed-off-by:Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220309061822.168173-1-aik@ozlabs.ru
-
Hangyu Hua authored
mpc8xx_pic_init() should return -ENOMEM instead of 0 when irq_domain_add_linear() return NULL. This cause mpc8xx_pics_init to continue executing even if mpc8xx_pic_host is NULL. Fixes: cc76404f ("powerpc/8xx: Fix possible device node reference leak") Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Reviewed-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
jing yangyang authored
Eliminate the following coccicheck warnings: ./arch/powerpc/platforms/ps3/system-bus.c:606:2-3: Unneeded semicolon ./arch/powerpc/platforms/ps3/system-bus.c:765:2-3: Unneeded semicolon Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
jing yangyang <jing.yangyang@zte.com.cn> Signed-off-by:
-
- 08 Mar, 2022 7 commits
-
-
Christophe Leroy authored
A ppc64_defconfig build exhibits about 10 copied of prevent_user_access(). It also have one copy of set_kuap(). c000000000017340 <.prevent_user_access.constprop.0>: c00000000001a038: 4b ff d3 09 bl c000000000017340 <.prevent_user_access.constprop.0> c00000000001aabc: 4b ff c8 85 bl c000000000017340 <.prevent_user_access.constprop.0> c00000000001ab38: 4b ff c8 09 bl c000000000017340 <.prevent_user_access.constprop.0> c00000000001ade0: 4b ff c5 61 bl c000000000017340 <.prevent_user_access.constprop.0> c000000000039b90 <.prevent_user_access.constprop.0>: c00000000003ac08: 4b ff ef 89 bl c000000000039b90 <.prevent_user_access.constprop.0> c00000000003b9d0: 4b ff e1 c1 bl c000000000039b90 <.prevent_user_access.constprop.0> c00000000003ba54: 4b ff e1 3d bl c000000000039b90 <.prevent_user_access.constprop.0> c00000000003bbfc: 4b ff df 95 bl c000000000039b90 <.prevent_user_access.constprop.0> c00000000015dde0 <.prevent_user_access.constprop.0>: c0000000001612c0: 4b ff cb 21 bl c00000000015dde0 <.prevent_user_access.constprop.0> c000000000161b54: 4b ff c2 8d bl c00000000015dde0 <.prevent_user_access.constprop.0> c000000000188cf0 <.prevent_user_access.constprop.0>: c00000000018d658: 4b ff b6 99 bl c000000000188cf0 <.prevent_user_access.constprop.0> c00000000030fe20 <.prevent_user_access.constprop.0>: c0000000003123d4: 4b ff da 4d bl c00000000030fe20 <.prevent_user_access.constprop.0> c000000000313970: 4b ff c4 b1 bl c00000000030fe20 <.prevent_user_access.constprop.0> c0000000005e6bd0 <.prevent_user_access.constprop.0>: c0000000005e7d8c: 4b ff ee 45 bl c0000000005e6bd0 <.prevent_user_access.constprop.0> c0000000007bcae0 <.prevent_user_access.constprop.0>: c0000000007bda10: 4b ff f0 d1 bl c0000000007bcae0 <.prevent_user_access.constprop.0> c0000000007bda54: 4b ff f0 8d bl c0000000007bcae0 <.prevent_user_access.constprop.0> c0000000007bdd28: 4b ff ed b9 bl c0000000007bcae0 <.prevent_user_access.constprop.0> c0000000007c0390: 4b ff c7 51 bl c0000000007bcae0 <.prevent_user_access.constprop.0> c00000000094e4f0 <.prevent_user_access.constprop.0>: c000000000950e40: 4b ff d6 b1 bl c00000000094e4f0 <.prevent_user_access.constprop.0> c00000000097d2d0 <.prevent_user_access.constprop.0>: c0000000009813fc: 4b ff be d5 bl c00000000097d2d0 <.prevent_user_access.constprop.0> c000000000acd540 <.prevent_user_access.constprop.0>: c000000000ad1d60: 4b ff b7 e1 bl c000000000acd540 <.prevent_user_access.constprop.0> c000000000e5d680 <.prevent_user_access.constprop.0>: c000000000e64b60: 4b ff 8b 21 bl c000000000e5d680 <.prevent_user_access.constprop.0> c000000000e64b6c: 4b ff 8b 15 bl c000000000e5d680 <.prevent_user_access.constprop.0> c000000000e64c38: 4b ff 8a 49 bl c000000000e5d680 <.prevent_user_access.constprop.0> When building signal_64.c with -Winline the following messages appear: ./arch/powerpc/include/asm/book3s/64/kup.h:331:20: error: inlining failed in call to 'set_kuap': call is unlikely and code size would grow [-Werror=inline] ./arch/powerpc/include/asm/book3s/64/kup.h:401:20: error: inlining failed in call to 'prevent_user_access.constprop': call is unlikely and code size would grow [-Werror=inline] Those functions are used on hot pathes and have been expected to be inlined at all time. Force them inline. This patch reduces the kernel text size by 700 bytes, confirming that not inlining those functions is not worth it. Signed-off-by:
-
Christophe Leroy authored
Building a kernel with CONFIG_CC_OPTIMISE_FOR_SIZE leads to the following functions being copied several times in vmlinux: 31 times __ilog2_u32() 34 times fls() Disassembly follows: c00f476c <fls>: c00f476c: 7c 63 00 34 cntlzw r3,r3 c00f4770: 20 63 00 20 subfic r3,r3,32 c00f4774: 4e 80 00 20 blr c00f4778 <__ilog2_u32>: c00f4778: 94 21 ff f0 stwu r1,-16(r1) c00f477c: 7c 08 02 a6 mflr r0 c00f4780: 90 01 00 14 stw r0,20(r1) c00f4784: 4b ff ff e9 bl c00f476c <fls> c00f4788: 80 01 00 14 lwz r0,20(r1) c00f478c: 38 63 ff ff addi r3,r3,-1 c00f4790: 7c 08 03 a6 mtlr r0 c00f4794: 38 21 00 10 addi r1,r1,16 c00f4798: 4e 80 00 20 blr When forcing inlining of fls(), we get c0008b80 <__ilog2_u32>: c0008b80: 7c 63 00 34 cntlzw r3,r3 c0008b84: 20 63 00 1f subfic r3,r3,31 c0008b88: 4e 80 00 20 blr vmlinux size gets reduced by 1 kbyte with that change. Signed-off-by:
-
Rohan McLure authored
Inspired by (bd75b4ef: Constify static attribute_group structs), accepted by linux-next, reported: https://patchwork.ozlabs.org/project/linuxppc-dev/patch/20220210202805.7750-4-rikard.falkeborn@gmail.com/ Nearly all singletons of type struct attribute_group are never modified, and so are candidates for being const. Declare them as const. Signed-off-by:
Rohan McLure <rmclure@linux.ibm.com> Signed-off-by:
-
YueHaibing authored
arch/powerpc/platforms/cell/spufs/sched.c:1055:12: warning: ‘show_spu_loadavg’ defined but not used [-Wunused-function] static int show_spu_loadavg(struct seq_file *s, void *private) ^~~~~~~~~~~~~~~~ Move it into #ifdef block to fix this, also remove unneeded semicolon. Signed-off-by:YueHaibing <yuehaibing@huawei.com> Reviewed-by:
-
Hangyu Hua authored
Refcount leak will happen when format_show returns failure in multiple cases. Unified management of of_node_put can fix this problem. Signed-off-by:
-
Michael Ellerman authored
Since the IBM A2 CPU support was removed, see commit fb5a5157 ("powerpc: Remove platforms/wsp and associated pieces"), the only 64-bit Book3E CPUs we support are Freescale (NXP) ones. However our Kconfig still allows configurating a kernel that has 64-bit Book3E support, but no Freescale CPU support enabled. Such a kernel would never boot, it doesn't know about any CPUs. It also causes build errors, as reported by lkp, because PPC_BARRIER_NOSPEC is not enabled in such a configuration: powerpc64-linux-ld: arch/powerpc/net/bpf_jit_comp64.o:(.toc+0x0): undefined reference to `powerpc_security_features' To fix this, force PPC_FSL_BOOK3E to be selected whenever we are building a 64-bit Book3E kernel. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Suggested-by:
-
Christophe Leroy authored
We originally added asm-prototypes.h in commit 42f5b4ca ("powerpc: Introduce asm-prototypes.h"). It's purpose was for prototypes of C functions that are only called from asm, in order to fix sparse warnings about missing prototypes. A few months later Nick added a different use case in commit 4efca4ed ("kbuild: modversions for EXPORT_SYMBOL() for asm") for C prototypes for exported asm functions. This is basically the inverse of our original usage. Since then we've added various prototypes to asm-prototypes.h for both reasons, meaning we now need to unstitch it all. Dispatch prototypes of C functions into relevant headers and keep only the prototypes for functions defined in assembly. For the time being, leave prom_init() there because moving it into asm/prom.h or asm/setup.h conflicts with drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowrom.o This will be fixed later by untaggling asm/pci.h and asm/prom.h or by renaming the function in shadowrom.c Signed-off-by:
-
- 07 Mar, 2022 30 commits
-
-
Christophe Leroy authored
kexec_paca is exclusively used in kexec/core_64.c Declare it static. Signed-off-by:
-
Christophe Leroy authored
current_set extern not needed anymore since commit eafd825e ("powerpc/64: Simplify __secondary_start paca->kstack handling") Signed-off-by:
-
Christophe Leroy authored
Last call to sys_swapcontext() from ASM was removed by commit fbcee2eb ("powerpc/32: Always save non volatile GPRs at syscall entry") sys_debug_setcontext() prototype not needed anymore since commit f3675644 ("powerpc/syscalls: signal_{32, 64} - switch to SYSCALL_DEFINE") sys_switch_endian() prototype not needed anymore since commit 81dac817 ("powerpc/64: Make sys_switch_endian() traceable") Signed-off-by:
-
Christophe Leroy authored
Instead of open coding offset value 24, use STK_GOT when accessing got register in stack. Signed-off-by:
-
Christophe Leroy authored
CONFIG_MPROFILE_KERNEL is only for PPC64 and ftrace_mprofile.o is build on PPC64 only when CONFIG_MPROFILE_KERNEL is defined. Move saving of r0 inside #ifdef PPC64 Signed-off-by:
-
Christophe Leroy authored
ftrace_caller() and frace_regs_caller() have now a lot in common. Refactor them using GAS macros. Signed-off-by:
-
Christophe Leroy authored
For the same reason as commit a85c728c ("powerpc/32: Don't use lmw/stmw for saving/restoring non volatile regs"), don't use lmw/stmw in ftrace_regs_caller(). Use the same macros for PPC32 and PPC64. Signed-off-by:
-
Pratik R. Sampat authored
Include a testcase to check if the sysfs files for energy and frequency related have its related attribute files exist and populated Signed-off-by:
Pratik R. Sampat <psampat@linux.ibm.com> Signed-off-by:
-
Pratik R. Sampat authored
Adds a syscall interface to represent the energy and frequency related PAPR attributes on the system using the new H_CALL "H_GET_ENERGY_SCALE_INFO". H_GET_EM_PARMS H_CALL was previously responsible for exporting this information in the lparcfg, however the H_GET_EM_PARMS H_CALL will be deprecated P10 onwards. The H_GET_ENERGY_SCALE_INFO H_CALL is of the following call format: hcall( uint64 H_GET_ENERGY_SCALE_INFO, // Get energy scale info uint64 flags, // Per the flag request uint64 firstAttributeId,// The attribute id uint64 bufferAddress, // Guest physical address of the output buffer uint64 bufferSize // The size in bytes of the output buffer ); As specified in PAPR+ v2.11, section 14.14.3. This H_CALL can query either all the attributes at once with firstAttributeId = 0, flags = 0 as well as query only one attribute at a time with firstAttributeId = id, flags = 1. The output buffer consists of the following 1. number of attributes - 8 bytes 2. array offset to the data location - 8 bytes 3. version info - 1 byte 4. A data array of size num attributes, which contains the following: a. attribute ID - 8 bytes b. attribute value in number - 8 bytes c. attribute name in string - 64 bytes d. attribute value in string - 64 bytes The new H_CALL exports information in direct string value format, hence a new interface has been introduced in /sys/firmware/papr/energy_scale_info to export this information to userspace so that the firmware can add new values without the need for the kernel to be changed. The H_CALL returns the name, numeric value and string value (if exists) The format of exposing the sysfs information is as follows: /sys/firmware/papr/energy_scale_info/ |-- <id>/ |-- desc |-- value |-- value_desc (if exists) |-- <id>/ |-- desc |-- value |-- value_desc (if exists) ... The energy information that is exported is useful for userspace tools such as powerpc-utils. Currently these tools infer the "power_mode_data" value in the lparcfg, which in turn is obtained from the to be deprecated H_GET_EM_PARMS H_CALL. On future platforms, such userspace utilities will have to look at the data returned from the new H_CALL being populated in this new sysfs interface and report this information directly without the need of interpretation. Signed-off-by: -
Ganesh Goudar authored
In realmode mce handler we use irq_work_queue() to defer the processing of mce events, irq_work_queue() can only be called when translation is enabled because it touches memory outside RMA, hence we enable translation before calling irq_work_queue and disable on return, though it is not safe to do in realmode. To avoid this, program the decrementer and call the event processing functions from timer handler. Signed-off-by:
Ganesh Goudar <ganeshgr@linux.ibm.com> Signed-off-by:
-
Ganesh Goudar authored
To avoid ambiguity, modify the strings in real address error logging messages to "foreign/control memory" from "foreign", Since the error discriptions in P9 user manual and P10 user manual are different for same type of errors. P9 User Manual for MCE: DSISR:59 Host real address to foreign space during translation. DSISR:60 Host real address to foreign space on a load or store access. P10 User Manual for MCE: DSISR:59 D-side tablewalk used a host real address in the control memory address range. DSISR:60 D-side operand access to control memory address space. Signed-off-by:
-
Ganesh Goudar authored
Add test for real address or control memory address access error handling, using NX-GZIP engine. The error is injected by accessing the control memory address using illegal instruction, on successful handling the process attempting to access control memory address using illegal instruction receives SIGBUS. Signed-off-by:
-
Ganesh Goudar authored
Add support to parse and log control memory access error for pseries. These changes are made according to PAPR v2.11 10.3.2.2.12. Signed-off-by:
-
Naveen N. Rao authored
Convert bpf_to_ppc() to a macro to help simplify its usage since codegen_context is available in all places it is used. Adopt it also for powerpc64 for uniformity and get rid of the global b2p structure. Signed-off-by:
-
Jordan Niethe authored
In bpf_jit_build_body(), the mapping of TMP_REG_1 and TMP_REG_2's bpf register to ppc register is evalulated at every use despite not changing. Instead, determine the ppc register once and store the result. Signed-off-by:
Jordan Niethe <jniethe5@gmail.com> [Rebased, converted additional usage sites] Signed-off-by:
-
Naveen N. Rao authored
Use _Rn macros to specify register names to make their usage clear. Signed-off-by:
-
Naveen N. Rao authored
There is no need for a separate header anymore. Move the contents of bpf_jit64.h into bpf_jit_comp64.c Signed-off-by:
-
Naveen N. Rao authored
- PPC_EX32() is only used by ppc32 JIT. Move it to bpf_jit_comp32.c - PPC_LI64() is only valid in ppc64. #ifdef it - PPC_FUNC_ADDR() is not used anymore. Remove it. Signed-off-by:
-
Naveen N. Rao authored
All these macros now have a single user. Expand their usage in place. Signed-off-by:
-
Naveen N. Rao authored
PPC_BPF_[LL|STL] are macros meant for scenarios where we may have to deal with a non-word aligned offset. Limit their usage to only those scenarios by converting the rest to just use PPC_BPF_[LD|STD]. Signed-off-by:
-
Naveen N. Rao authored
PPC_BL_ABS() is just doing a relative branch with link. The name suggests that it is for branching to an absolute address, which is incorrect. Rename the macro to a more appropriate PPC_BL(). Signed-off-by:
-
Naveen N. Rao authored
When calling BPF helpers, we load the function address to call into a register. This can result in upto 5 instructions. Optimize this by instead using the kernel toc in r2 and adjusting offset to the BPF helper. This works since all BPF helpers are part of kernel text, and all BPF programs/functions utilize the kernel TOC. Further more: - load the actual function entry address in elf v1, rather than loading it through the function descriptor address. - load the Local Entry Point (LEP) in elf v2 skipping TOC setup. - consolidate code across elf abi v1 and v2 by using r12 on both. Reported-by:
Anton Blanchard <anton@ozlabs.org> Signed-off-by:
-
Naveen N. Rao authored
BPF helpers always reside in core kernel and all BPF programs use the kernel TOC. As such, there is no need to load the TOC before calling helpers or other BPF functions. Drop code to do the same. Add a check to ensure we don't proceed if this assumption ever changes in future. Signed-off-by:
-
Naveen N. Rao authored
In preparation for using kernel TOC, load the same in r2 on entry. With elfv1, the kernel TOC is already setup by our caller. We adjust the number of instructions to skip on a tail call accordingly. We get rid of the #ifdef in bpf_jit_emit_tail_call() since FUNCTION_DESCR_SIZE is itself under a #ifdef. Signed-off-by:
-
Naveen N. Rao authored
Set macros to 1 so that they can be used with __is_defined(). Suggested-by:
-
Naveen N. Rao authored
In preparation for preserving kernel toc in r2, switch BPF_REG_AX from r2 to r12. r12 is not used by bpf JIT except during external helper/bpf calls, or with BPF_NOSPEC. These sequences aren't emitted when BPF_REG_AX is used for constant blinding and other purposes. Signed-off-by:
-
Naveen N. Rao authored
Instead of saving and restoring LR before each invocation to bpf_stf_barrier(), set SEEN_FUNC flag so that we save/restore LR in prologue/epilogue. Signed-off-by:
-
Naveen N. Rao authored
In some scenarios, it is possible that the program epilogue is outside the branch range for a BPF_EXIT instruction. Instead of rejecting such programs, emit epilogue as an alternate exit point from the program. Track the location of the same so that subsequent exits can take either of the two paths. Reported-by:
-
Naveen N. Rao authored
PPC_BCC() emits two instructions to accommodate scenarios where we need to branch outside the range of a conditional branch. PPC_BCC_SHORT() emits a single branch instruction and can be used when the branch is known to be within a conditional branch range. Convert some of the uses of PPC_BCC() in the powerpc BPF JIT over to PPC_BCC_SHORT() where we know the branch range. Signed-off-by:
-
Naveen N. Rao authored
During the first pass, addrs[] is still being populated. So, all branches to following instructions will appear to be going to the start of the JIT program. Ignore branch range validation for such instructions and assume those to be in range. Branch range validation will happen during the second pass after addrs[] is setup properly. Signed-off-by:
-
