- 02 Oct, 2018 40 commits
-
-
Aleksander Morgado authored
BugLink: https://bugs.launchpad.net/bugs/1792340 commit 7bab01ec upstream. The device exposes AT, NMEA and DIAG ports in both USB configurations. The patch explicitly ignores interfaces 0 and 1, as they're bound to other drivers already; and also interface 6, which is a GNSS interface for which we don't have a driver yet. T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 18 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev=03.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev=03.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
John Ogness authored
BugLink: https://bugs.launchpad.net/bugs/1792340 commit e6087001 upstream. The portdata spinlock can be taken in interrupt context (via sierra_outdat_callback()). Disable interrupts when taking the portdata spinlock when discarding deferred URBs during close to prevent a possible deadlock. Fixes: 014333f7 ("USB: sierra: fix urb and memory leak on disconnect") Cc: stable <stable@vger.kernel.org> Signed-off-by:
John Ogness <john.ogness@linutronix.de> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> [ johan: amend commit message and add fixes and stable tags ] Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1792340 commit 3acd3e3b upstream. The endian conversions used in vxp_dma_read() and vxp_dma_write() are superfluous and even wrong on big-endian machines, as inw() and outw() already do conversions. Kill them. Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1792340 commit dfef01e1 upstream. snd_dma_alloc_pages_fallback() tries to allocate pages again when the allocation fails with reduced size. But the first try actually *increases* the size to power-of-two, which may give back a larger chunk than the requested size. This confuses the callers, e.g. sgbuf assumes that the size is equal or less, and it may result in a bad loop due to the underflow and eventually lead to Oops. The code of this function seems incorrectly assuming the usage of get_order(). We need to decrease at first, then align to power-of-two. Reported-and-tested-by:
he, bo <bo.he@intel.com> Reported-by:
zhang jun <jun.zhang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hans de Goede authored
BugLink: https://bugs.launchpad.net/bugs/1792340 commit 8e82a728 upstream. I added the subsys product-id for the HDMI HDA device rather then for the PCH one, this commit fixes this. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104 Cc: stable@vger.kernel.org Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1792340 commit 69756930 upstream. One place in cs5535audio_build_dma_packets() does an extra conversion via cpu_to_le32(); namely jmpprd_addr is passed to setup_prd() ops, which writes the value via cs_writel(). That is, the callback does the conversion by itself, and we don't need to convert beforehand. This patch fixes that bogus conversion. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1792340 commit 50e9ffb1 upstream. The virmidi output trigger tries to parse the all available bytes and process sequencer events as much as possible. In a normal situation, this is supposed to be relatively short, but a program may give a huge buffer and it'll take a long time in a single spin lock, which may eventually lead to a soft lockup. This patch simply adds a workaround, a cond_resched() call in the loop if applicable. A better solution would be to move the event processor into a work, but let's put a duct-tape quickly at first. Reported-and-tested-by:
Dae R. Jeong <threeearcat@gmail.com> Reported-by: syzbot+619d9f40141d826b097e@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1792340 commit fff71a4c upstream. The endian conversions used in vx2_dma_read() and vx2_dma_write() are superfluous and even wrong on big-endian machines, as inl() and outl() already do conversions. Kill them. Spotted by sparse, a warning like: sound/pci/vx222/vx222_ops.c:278:30: warning: incorrect type in argument 1 (different base types) Cc: <stable@vger.kernel.org> Signed-off-by:
-
Park Ju Hyung authored
BugLink: https://bugs.launchpad.net/bugs/1792340 commit d77a4b4a upstream. As an equivalent codec with CX20724, CX8200 is also subject to the reboot bug. Late 2017 and 2018 LG Gram and some HP Spectre laptops are known victims to this issue, causing extremely loud noises upon reboot. Now that we know that this bug is subject to multiple codecs, fix the comment as well. Signed-off-by:
Park Ju Hyung <qkrwngud825@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Park Ju Hyung authored
BugLink: https://bugs.launchpad.net/bugs/1792340 commit f59cf9a0 upstream. On rare occasions, we are still noticing that the internal speaker spitting out spurious noises even after adding the problematic codec to the list. Adding a 10ms artificial delay before rebooting fixes the issue entirely. Patch for Realtek codecs also adds the same amount of delay after entering D3. Signed-off-by:
-
Hangbin Liu authored
BugLink: https://bugs.launchpad.net/bugs/1792340 [ Upstream commit 2df8bee5 ] Li Shuang reported the following crash: [ 71.267724] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 [ 71.276456] PGD 800000085d9bd067 P4D 800000085d9bd067 PUD 859a0b067 PMD 0 [ 71.284127] Oops: 0000 [#1] SMP PTI [ 71.288015] CPU: 12 PID: 2386 Comm: tc Not tainted 4.18.0-rc8.latest+ #131 [ 71.295686] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.1.5 04/11/2016 [ 71.304037] RIP: 0010:tcindex_delete+0x72/0x280 [cls_tcindex] [ 71.310446] Code: 00 31 f6 48 87 75 20 48 85 f6 74 11 48 8b 47 18 48 8b 40 08 48 8b 40 50 e8 fb a6 f8 fc 48 85 db 0f 84 dc 00 00 00 48 8b 73 18 <8b> 56 04 48 8d 7e 04 85 d2 0f 84 7b 01 00 [ 71.331517] RSP: 0018:ffffb45207b3f898 EFLAGS: 00010282 [ 71.337345] RAX: ffff8ad3d72d6360 RBX: ffff8acc84393680 RCX: 000000000000002e [ 71.345306] RDX: ffff8ad3d72c8570 RSI: 0000000000000000 RDI: ffff8ad847a45800 [ 71.353277] RBP: ffff8acc84393688 R08: ffff8ad3d72c8400 R09: 0000000000000000 [ 71.361238] R10: ffff8ad3de786e00 R11: 0000000000000000 R12: ffffb45207b3f8c7 [ 71.369199] R13: ffff8ad3d93bd2a0 R14: 000000000000002e R15: ffff8ad3d72c9600 [ 71.377161] FS: 00007f9d3ec3e740(0000) GS:ffff8ad3df980000(0000) knlGS:0000000000000000 [ 71.386188] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 71.392597] CR2: 0000000000000004 CR3: 0000000852f06003 CR4: 00000000001606e0 [ 71.400558] Call Trace: [ 71.403299] tcindex_destroy_element+0x25/0x40 [cls_tcindex] [ 71.409611] tcindex_walk+0xbb/0x110 [cls_tcindex] [ 71.414953] tcindex_destroy+0x44/0x90 [cls_tcindex] [ 71.420492] ? tcindex_delete+0x280/0x280 [cls_tcindex] [ 71.426323] tcf_proto_destroy+0x16/0x40 [ 71.430696] tcf_chain_flush+0x51/0x70 [ 71.434876] tcf_block_put_ext.part.30+0x8f/0x1b0 [ 71.440122] tcf_block_put+0x4d/0x70 [ 71.444108] cbq_destroy+0x4d/0xd0 [sch_cbq] [ 71.448869] qdisc_destroy+0x62/0x130 [ 71.452951] dsmark_destroy+0x2a/0x70 [sch_dsmark] [ 71.458300] qdisc_destroy+0x62/0x130 [ 71.462373] qdisc_graft+0x3ba/0x470 [ 71.466359] tc_get_qdisc+0x2a6/0x2c0 [ 71.470443] ? cred_has_capability+0x7d/0x130 [ 71.475307] rtnetlink_rcv_msg+0x263/0x2d0 [ 71.479875] ? rtnl_calcit.isra.30+0x110/0x110 [ 71.484832] netlink_rcv_skb+0x4d/0x130 [ 71.489109] netlink_unicast+0x1a3/0x250 [ 71.493482] netlink_sendmsg+0x2ae/0x3a0 [ 71.497859] sock_sendmsg+0x36/0x40 [ 71.501748] ___sys_sendmsg+0x26f/0x2d0 [ 71.506029] ? handle_pte_fault+0x586/0xdf0 [ 71.510694] ? __handle_mm_fault+0x389/0x500 [ 71.515457] ? __sys_sendmsg+0x5e/0xa0 [ 71.519636] __sys_sendmsg+0x5e/0xa0 [ 71.523626] do_syscall_64+0x5b/0x180 [ 71.527711] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 71.533345] RIP: 0033:0x7f9d3e257f10 [ 71.537331] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 [ 71.558401] RSP: 002b:00007fff6f893398 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 71.566848] RAX: ffffffffffffffda RBX: 000000005b71274d RCX: 00007f9d3e257f10 [ 71.574810] RDX: 0000000000000000 RSI: 00007fff6f8933e0 RDI: 0000000000000003 [ 71.582770] RBP: 00007fff6f8933e0 R08: 000000000000ffff R09: 0000000000000003 [ 71.590729] R10: 00007fff6f892e20 R11: 0000000000000246 R12: 0000000000000000 [ 71.598689] R13: 0000000000662ee0 R14: 0000000000000000 R15: 0000000000000000 [ 71.606651] Modules linked in: sch_cbq cls_tcindex sch_dsmark xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_coni [ 71.685425] libahci i2c_algo_bit i2c_core i40e libata dca mdio megaraid_sas dm_mirror dm_region_hash dm_log dm_mod [ 71.697075] CR2: 0000000000000004 [ 71.700792] ---[ end trace f604eb1acacd978b ]--- Reproducer: tc qdisc add dev lo handle 1:0 root dsmark indices 64 set_tc_index tc filter add dev lo parent 1:0 protocol ip prio 1 tcindex mask 0xfc shift 2 tc qdisc add dev lo parent 1:0 handle 2:0 cbq bandwidth 10Mbit cell 8 avpkt 1000 mpu 64 tc class add dev lo parent 2:0 classid 2:1 cbq bandwidth 10Mbit rate 1500Kbit avpkt 1000 prio 1 bounded isolated allot 1514 weight 1 maxburst 10 tc filter add dev lo parent 2:0 protocol ip prio 1 handle 0x2e tcindex classid 2:1 pass_on tc qdisc add dev lo parent 2:1 pfifo limit 5 tc qdisc del dev lo root This is because in tcindex_set_parms, when there is no old_r, we set new exts to cr.exts. And we didn't set it to filter when r == &new_filter_result. Then in tcindex_delete() -> tcf_exts_get_net(), we will get NULL pointer dereference as we didn't init exts. Fix it by moving tcf_exts_change() after "if (old_r && old_r != r)" check. Then we don't need "cr" as there is no errout after that. Fixes: bf63ac73 ("net_sched: fix an oops in tcindex filter") Reported-by:
Li Shuang <shuali@redhat.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Cong Wang authored
BugLink: https://bugs.launchpad.net/bugs/1792340 [ Upstream commit 455f05ec ] syzbot reported that we reinitialize an active delayed work in vsock_stream_connect(): ODEBUG: init active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x90 kernel/workqueue.c:1414 WARNING: CPU: 1 PID: 11518 at lib/debugobjects.c:329 debug_print_object+0x16a/0x210 lib/debugobjects.c:326 The pattern is apparently wrong, we should only initialize the dealyed work once and could repeatly schedule it. So we have to move out the initializations to allocation side. And to avoid confusion, we can split the shared dwork into two, instead of re-using the same one. Fixes: d021c344 ("VSOCK: Introduce VM Sockets") Reported-by: <syzbot+8a9b1bd330476a4f3db6@syzkaller.appspotmail.com> Cc: Andy king <acking@vmware.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
-
Hangbin Liu authored
BugLink: https://bugs.launchpad.net/bugs/1792340 [ Upstream commit 008369dc ] Li Shuang reported the following warn: [ 733.484610] WARNING: CPU: 6 PID: 21123 at net/sched/sch_cbq.c:1418 cbq_destroy_class+0x5d/0x70 [sch_cbq] [ 733.495190] Modules linked in: sch_cbq cls_tcindex sch_dsmark rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat l [ 733.574155] syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm igb ixgbe ahci libahci i2c_algo_bit libata i40e i2c_core dca mdio megaraid_sas dm_mirror dm_region_hash dm_log dm_mod [ 733.592500] CPU: 6 PID: 21123 Comm: tc Not tainted 4.18.0-rc8.latest+ #131 [ 733.600169] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.1.5 04/11/2016 [ 733.608518] RIP: 0010:cbq_destroy_class+0x5d/0x70 [sch_cbq] [ 733.614734] Code: e7 d9 d2 48 8b 7b 48 e8 61 05 da d2 48 8d bb f8 00 00 00 e8 75 ae d5 d2 48 39 eb 74 0a 48 89 df 5b 5d e9 16 6c 94 d2 5b 5d c3 <0f> 0b eb b6 0f 1f 44 00 00 66 2e 0f 1f 84 [ 733.635798] RSP: 0018:ffffbfbb066bb9d8 EFLAGS: 00010202 [ 733.641627] RAX: 0000000000000001 RBX: ffff9cdd17392800 RCX: 000000008010000f [ 733.649588] RDX: ffff9cdd1df547e0 RSI: ffff9cdd17392800 RDI: ffff9cdd0f84c800 [ 733.657547] RBP: ffff9cdd0f84c800 R08: 0000000000000001 R09: 0000000000000000 [ 733.665508] R10: ffff9cdd0f84d000 R11: 0000000000000001 R12: 0000000000000001 [ 733.673469] R13: 0000000000000000 R14: 0000000000000001 R15: ffff9cdd17392200 [ 733.681430] FS: 00007f911890a740(0000) GS:ffff9cdd1f8c0000(0000) knlGS:0000000000000000 [ 733.690456] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 733.696864] CR2: 0000000000b5544c CR3: 0000000859374002 CR4: 00000000001606e0 [ 733.704826] Call Trace: [ 733.707554] cbq_destroy+0xa1/0xd0 [sch_cbq] [ 733.712318] qdisc_destroy+0x62/0x130 [ 733.716401] dsmark_destroy+0x2a/0x70 [sch_dsmark] [ 733.721745] qdisc_destroy+0x62/0x130 [ 733.725829] qdisc_graft+0x3ba/0x470 [ 733.729817] tc_get_qdisc+0x2a6/0x2c0 [ 733.733901] ? cred_has_capability+0x7d/0x130 [ 733.738761] rtnetlink_rcv_msg+0x263/0x2d0 [ 733.743330] ? rtnl_calcit.isra.30+0x110/0x110 [ 733.748287] netlink_rcv_skb+0x4d/0x130 [ 733.752576] netlink_unicast+0x1a3/0x250 [ 733.756949] netlink_sendmsg+0x2ae/0x3a0 [ 733.761324] sock_sendmsg+0x36/0x40 [ 733.765213] ___sys_sendmsg+0x26f/0x2d0 [ 733.769493] ? handle_pte_fault+0x586/0xdf0 [ 733.774158] ? __handle_mm_fault+0x389/0x500 [ 733.778919] ? __sys_sendmsg+0x5e/0xa0 [ 733.783099] __sys_sendmsg+0x5e/0xa0 [ 733.787087] do_syscall_64+0x5b/0x180 [ 733.791171] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 733.796805] RIP: 0033:0x7f9117f23f10 [ 733.800791] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 [ 733.821873] RSP: 002b:00007ffe96818398 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 733.830319] RAX: ffffffffffffffda RBX: 000000005b71244c RCX: 00007f9117f23f10 [ 733.838280] RDX: 0000000000000000 RSI: 00007ffe968183e0 RDI: 0000000000000003 [ 733.846241] RBP: 00007ffe968183e0 R08: 000000000000ffff R09: 0000000000000003 [ 733.854202] R10: 00007ffe96817e20 R11: 0000000000000246 R12: 0000000000000000 [ 733.862161] R13: 0000000000662ee0 R14: 0000000000000000 R15: 0000000000000000 [ 733.870121] ---[ end trace 28edd4aad712ddca ]--- This is because we didn't update f->result.res when create new filter. Then in tcindex_delete() -> tcf_unbind_filter(), we will failed to find out the res and unbind filter, which will trigger the WARN_ON() in cbq_destroy_class(). Fix it by updating f->result.res when create new filter. Fixes: 6e056569 ("net_sched: fix another crash in cls_tcindex") Reported-by:
-
Cong Wang authored
BugLink: https://bugs.launchpad.net/bugs/1792340 [ Upstream commit 0dcb8225 ] llc_sap_put() decreases the refcnt before deleting sap from the global list. Therefore, there is a chance llc_sap_find() could find a sap with zero refcnt in this global list. Close this race condition by checking if refcnt is zero or not in llc_sap_find(), if it is zero then it is being removed so we can just treat it as gone. Reported-by: <syzbot+278893f3f7803871f7ce@syzkaller.appspotmail.com> Signed-off-by:
-
Wei Wang authored
BugLink: https://bugs.launchpad.net/bugs/1792340 [ Upstream commit 6d37fa49 ] In l2tp code, if it is a L2TP_UDP_ENCAP tunnel, tunnel->sk points to a UDP socket. User could call sendmsg() on both this tunnel and the UDP socket itself concurrently. As l2tp_xmit_skb() holds socket lock and call __sk_dst_check() to refresh sk->sk_dst_cache, while udpv6_sendmsg() is lockless and call sk_dst_check() to refresh sk->sk_dst_cache, there could be a race and cause the dst cache to be freed multiple times. So we fix l2tp side code to always call sk_dst_check() to garantee xchg() is called when refreshing sk->sk_dst_cache to avoid race conditions. Syzkaller reported stack trace: BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:21 [inline] BUG: KASAN: use-after-free in atomic_fetch_add_unless include/linux/atomic.h:575 [inline] BUG: KASAN: use-after-free in atomic_add_unless include/linux/atomic.h:597 [inline] BUG: KASAN: use-after-free in dst_hold_safe include/net/dst.h:308 [inline] BUG: KASAN: use-after-free in ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029 Read of size 4 at addr ffff8801aea9a880 by task syz-executor129/4829 CPU: 0 PID: 4829 Comm: syz-executor129 Not tainted 4.18.0-rc7-next-20180802+ #30 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x30d mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 kasan_check_read+0x11/0x20 mm/kasan/kasan.c:272 atomic_read include/asm-generic/atomic-instrumented.h:21 [inline] atomic_fetch_add_unless include/linux/atomic.h:575 [inline] atomic_add_unless include/linux/atomic.h:597 [inline] dst_hold_safe include/net/dst.h:308 [inline] ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029 rt6_get_pcpu_route net/ipv6/route.c:1249 [inline] ip6_pol_route+0x354/0xd20 net/ipv6/route.c:1922 ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2098 fib6_rule_lookup+0x283/0x890 net/ipv6/fib6_rules.c:122 ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2126 ip6_dst_lookup_tail+0x1278/0x1da0 net/ipv6/ip6_output.c:978 ip6_dst_lookup_flow+0xc8/0x270 net/ipv6/ip6_output.c:1079 ip6_sk_dst_lookup_flow+0x5ed/0xc50 net/ipv6/ip6_output.c:1117 udpv6_sendmsg+0x2163/0x36b0 net/ipv6/udp.c:1354 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x51d/0x930 net/socket.c:2115 __sys_sendmmsg+0x240/0x6f0 net/socket.c:2210 __do_sys_sendmmsg net/socket.c:2239 [inline] __se_sys_sendmmsg net/socket.c:2236 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2236 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x446a29 Code: e8 ac b8 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f4de5532db8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000006dcc38 RCX: 0000000000446a29 RDX: 00000000000000b8 RSI: 0000000020001b00 RDI: 0000000000000003 RBP: 00000000006dcc30 R08: 00007f4de5533700 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dcc3c R13: 00007ffe2b830fdf R14: 00007f4de55339c0 R15: 0000000000000001 Fixes: 71b1391a ("l2tp: ensure sk->dst is still valid") Reported-by: syzbot+05f840f3b04f211bad55@syzkaller.appspotmail.com Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Cc: Guillaume Nault <g.nault@alphalink.fr> Cc: David Ahern <dsahern@gmail.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Alexey Kodanev authored
BugLink: https://bugs.launchpad.net/bugs/1792340 [ Upstream commit 61ef4b07 ] The shift of 'cwnd' with '(now - hc->tx_lsndtime) / hc->tx_rto' value can lead to undefined behavior [1]. In order to fix this use a gradual shift of the window with a 'while' loop, similar to what tcp_cwnd_restart() is doing. When comparing delta and RTO there is a minor difference between TCP and DCCP, the last one also invokes dccp_cwnd_restart() and reduces 'cwnd' if delta equals RTO. That case is preserved in this change. [1]: [40850.963623] UBSAN: Undefined behaviour in net/dccp/ccids/ccid2.c:237:7 [40851.043858] shift exponent 67 is too large for 32-bit type 'unsigned int' [40851.127163] CPU: 3 PID: 15940 Comm: netstress Tainted: G W E 4.18.0-rc7.x86_64 #1 ... [40851.377176] Call Trace: [40851.408503] dump_stack+0xf1/0x17b [40851.451331] ? show_regs_print_info+0x5/0x5 [40851.503555] ubsan_epilogue+0x9/0x7c [40851.548363] __ubsan_handle_shift_out_of_bounds+0x25b/0x2b4 [40851.617109] ? __ubsan_handle_load_invalid_value+0x18f/0x18f [40851.686796] ? xfrm4_output_finish+0x80/0x80 [40851.739827] ? lock_downgrade+0x6d0/0x6d0 [40851.789744] ? xfrm4_prepare_output+0x160/0x160 [40851.845912] ? ip_queue_xmit+0x810/0x1db0 [40851.895845] ? ccid2_hc_tx_packet_sent+0xd36/0x10a0 [dccp] [40851.963530] ccid2_hc_tx_packet_sent+0xd36/0x10a0 [dccp] [40852.029063] dccp_xmit_packet+0x1d3/0x720 [dccp] [40852.086254] dccp_write_xmit+0x116/0x1d0 [dccp] [40852.142412] dccp_sendmsg+0x428/0xb20 [dccp] [40852.195454] ? inet_dccp_listen+0x200/0x200 [dccp] [40852.254833] ? sched_clock+0x5/0x10 [40852.298508] ? sched_clock+0x5/0x10 [40852.342194] ? inet_create+0xdf0/0xdf0 [40852.388988] sock_sendmsg+0xd9/0x160 ... Fixes: 113ced1f ("dccp ccid-2: Perform congestion-window validation") Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1792336Signed-off-by:
-
Sean Christopherson authored
BugLink: https://bugs.launchpad.net/bugs/1792336 commit f19f5c49 upstream. It turns out that we should *not* invert all not-present mappings, because the all zeroes case is obviously special. clear_page() does not undergo the XOR logic to invert the address bits, i.e. PTE, PMD and PUD entries that have not been individually written will have val=0 and so will trigger __pte_needs_invert(). As a result, {pte,pmd,pud}_pfn() will return the wrong PFN value, i.e. all ones (adjusted by the max PFN mask) instead of zero. A zeroed entry is ok because the page at physical address 0 is reserved early in boot specifically to mitigate L1TF, so explicitly exempt them from the inversion when reading the PFN. Manifested as an unexpected mprotect(..., PROT_NONE) failure when called on a VMA that has VM_PFNMAP and was mmap'd to as something other than PROT_NONE but never used. mprotect() sends the PROT_NONE request down prot_none_walk(), which walks the PTEs to check the PFNs. prot_none_pte_entry() gets the bogus PFN from pte_pfn() and returns -EACCES because it thinks mprotect() is trying to adjust a high MMIO address. [ This is a very modified version of Sean's original patch, but all credit goes to Sean for doing this and also pointing out that sometimes the __pte_needs_invert() function only gets the protection bits, not the full eventual pte. But zero remains special even in just protection bits, so that's ok. - Linus ] Fixes: f22cc87f ("x86/speculation/l1tf: Invert all not present mappings") Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Acked-by:
Andi Kleen <ak@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1792310Signed-off-by:
-
Toshi Kani authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit 5e0fb5df upstream. ioremap() calls pud_free_pmd_page() / pmd_free_pte_page() when it creates a pud / pmd map. The following preconditions are met at their entry. - All pte entries for a target pud/pmd address range have been cleared. - System-wide TLB purges have been peformed for a target pud/pmd address range. The preconditions assure that there is no stale TLB entry for the range. Speculation may not cache TLB entries since it requires all levels of page entries, including ptes, to have P & A-bits set for an associated address. However, speculation may cache pud/pmd entries (paging-structure caches) when they have P-bit set. Add a system-wide TLB purge (INVLPG) to a single page after clearing pud/pmd entry's P-bit. SDM 4.10.4.1, Operation that Invalidate TLBs and Paging-Structure Caches, states that: INVLPG invalidates all paging-structure caches associated with the current PCID regardless of the liner addresses to which they correspond. Fixes: 28ee90fe ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by:
Toshi Kani <toshi.kani@hpe.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: mhocko@suse.com Cc: akpm@linux-foundation.org Cc: hpa@zytor.com Cc: cpandya@codeaurora.org Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: Joerg Roedel <joro@8bytes.org> Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20180627141348.21777-4-toshi.kani@hpe.comSigned-off-by:
-
Chintan Pandya authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit 785a19f9 upstream. The following kernel panic was observed on ARM64 platform due to a stale TLB entry. 1. ioremap with 4K size, a valid pte page table is set. 2. iounmap it, its pte entry is set to 0. 3. ioremap the same address with 2M size, update its pmd entry with a new value. 4. CPU may hit an exception because the old pmd entry is still in TLB, which leads to a kernel panic. Commit b6bdb751 ("mm/vmalloc: add interfaces to free unmapped page table") has addressed this panic by falling to pte mappings in the above case on ARM64. To support pmd mappings in all cases, TLB purge needs to be performed in this case on ARM64. Add a new arg, 'addr', to pud_free_pmd_page() and pmd_free_pte_page() so that TLB purge can be added later in seprate patches. [toshi.kani@hpe.com: merge changes, rewrite patch description] Fixes: 28ee90fe ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by:
Chintan Pandya <cpandya@codeaurora.org> Signed-off-by:
-
Mark Salyzyn authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit 7992c188 upstream. CVE-2018-9363 The buffer length is unsigned at all layers, but gets cast to int and checked in hidp_process_report and can lead to a buffer overflow. Switch len parameter to unsigned int to resolve issue. This affects 3.18 and newer kernels. Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Fixes: a4b1b587 ("HID: Bluetooth: hidp: make sure input buffers are big enough") Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Kees Cook <keescook@chromium.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: linux-bluetooth@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: security@kernel.org Cc: kernel-team@android.com Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Thierry Escande authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit 3bbda5a3 upstream. If the ts3a227e audio accessory detection hardware is present and its driver probed, the jack needs to be created before enabling jack detection in the ts3a227e driver. With this patch, the jack is instantiated in the max98090 headset init function if the ts3a227e is present. This fixes a null pointer dereference as the jack detection enabling function in the ts3a driver was called before the jack is created. [minor correction to keep error handling on jack creation the same as before by Pierre Bossart] Signed-off-by:
Thierry Escande <thierry.escande@collabora.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit 318abdfb upstream. Like the skcipher_walk and blkcipher_walk cases: scatterwalk_done() is only meant to be called after a nonzero number of bytes have been processed, since scatterwalk_pagedone() will flush the dcache of the *previous* page. But in the error case of ablkcipher_walk_done(), e.g. if the input wasn't an integer number of blocks, scatterwalk_done() was actually called after advancing 0 bytes. This caused a crash ("BUG: unable to handle kernel paging request") during '!PageSlab(page)' on architectures like arm and arm64 that define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE, provided that the input was page-aligned as in that case walk->offset == 0. Fix it by reorganizing ablkcipher_walk_done() to skip the scatterwalk_advance() and scatterwalk_done() if an error has occurred. Reported-by:
Liu Chao <liuchao741@huawei.com> Fixes: bf06099d ("crypto: skcipher - Add ablkcipher_walk interfaces") Cc: <stable@vger.kernel.org> # v2.6.35+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit 0868def3 upstream. Like the skcipher_walk case: scatterwalk_done() is only meant to be called after a nonzero number of bytes have been processed, since scatterwalk_pagedone() will flush the dcache of the *previous* page. But in the error case of blkcipher_walk_done(), e.g. if the input wasn't an integer number of blocks, scatterwalk_done() was actually called after advancing 0 bytes. This caused a crash ("BUG: unable to handle kernel paging request") during '!PageSlab(page)' on architectures like arm and arm64 that define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE, provided that the input was page-aligned as in that case walk->offset == 0. Fix it by reorganizing blkcipher_walk_done() to skip the scatterwalk_advance() and scatterwalk_done() if an error has occurred. This bug was found by syzkaller fuzzing. Reproducer, assuming ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE: #include <linux/if_alg.h> #include <sys/socket.h> #include <unistd.h> int main() { struct sockaddr_alg addr = { .salg_type = "skcipher", .salg_name = "ecb(aes-generic)", }; char buffer[4096] __attribute__((aligned(4096))) = { 0 }; int fd; fd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(fd, (void *)&addr, sizeof(addr)); setsockopt(fd, SOL_ALG, ALG_SET_KEY, buffer, 16); fd = accept(fd, NULL, NULL); write(fd, buffer, 15); read(fd, buffer, 15); } Reported-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit bb296481 upstream. syzbot reported a crash in vmac_final() when multiple threads concurrently use the same "vmac(aes)" transform through AF_ALG. The bug is pretty fundamental: the VMAC template doesn't separate per-request state from per-tfm (per-key) state like the other hash algorithms do, but rather stores it all in the tfm context. That's wrong. Also, vmac_final() incorrectly zeroes most of the state including the derived keys and cached pseudorandom pad. Therefore, only the first VMAC invocation with a given key calculates the correct digest. Fix these bugs by splitting the per-tfm state from the per-request state and using the proper init/update/final sequencing for requests. Reproducer for the crash: #include <linux/if_alg.h> #include <sys/socket.h> #include <unistd.h> int main() { int fd; struct sockaddr_alg addr = { .salg_type = "hash", .salg_name = "vmac(aes)", }; char buf[256] = { 0 }; fd = socket(AF_ALG, SOCK_SEQPACKET, 0); bind(fd, (void *)&addr, sizeof(addr)); setsockopt(fd, SOL_ALG, ALG_SET_KEY, buf, 16); fork(); fd = accept(fd, NULL, NULL); for (;;) write(fd, buf, 256); } The immediate cause of the crash is that vmac_ctx_t.partial_size exceeds VMAC_NHBYTES, causing vmac_final() to memset() a negative length. Reported-by: syzbot+264bca3a6e8d645550d3@syzkaller.appspotmail.com Fixes: f1939f7c ("crypto: vmac - New hash algorithm for intel_txt support") Cc: <stable@vger.kernel.org> # v2.6.32+ Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit 73bf20ef upstream. The VMAC template assumes the block cipher has a 128-bit block size, but it failed to check for that. Thus it was possible to instantiate it using a 64-bit block size cipher, e.g. "vmac(cast5)", causing uninitialized memory to be used. Add the needed check when instantiating the template. Fixes: f1939f7c ("crypto: vmac - New hash algorithm for intel_txt support") Cc: <stable@vger.kernel.org> # v2.6.32+ Signed-off-by:
-
Randy Dunlap authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit 934193a6 upstream. Verify that 'depmod' ($DEPMOD) is installed. This is a partial revert of commit 620c231c ("kbuild: do not check for ancient modutils tools"). Also update Documentation/process/changes.rst to refer to kmod instead of module-init-tools. Fixes kernel bugzilla #198965: https://bugzilla.kernel.org/show_bug.cgi?id=198965Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Jessica Yu <jeyu@kernel.org> Cc: Chih-Wei Huang <cwhuang@linux.org.tw> Cc: stable@vger.kernel.org # any kernel since 2012 Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Liwei Song authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit 17e83549 upstream. Fix the following kernel bug: kernel BUG at drivers/iommu/intel-iommu.c:3260! invalid opcode: 0000 [#5] PREEMPT SMP Hardware name: Intel Corp. Harcuvar/Server, BIOS HAVLCRB0.X64.0013.D39.1608311820 08/31/2016 task: ffff880175389950 ti: ffff880176bec000 task.ti: ffff880176bec000 RIP: 0010:[<ffffffff8150a83b>] [<ffffffff8150a83b>] intel_unmap+0x25b/0x260 RSP: 0018:ffff880176bef5e8 EFLAGS: 00010296 RAX: 0000000000000024 RBX: ffff8800773c7c88 RCX: 000000000000ce04 RDX: 0000000080000000 RSI: 0000000000000000 RDI: 0000000000000009 RBP: ffff880176bef638 R08: 0000000000000010 R09: 0000000000000004 R10: ffff880175389c78 R11: 0000000000000a4f R12: ffff8800773c7868 R13: 00000000ffffac88 R14: ffff8800773c7818 R15: 0000000000000001 FS: 00007fef21258700(0000) GS:ffff88017b5c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000066d6d8 CR3: 000000007118c000 CR4: 00000000003406e0 Stack: 00000000ffffac88 ffffffff8199867f ffff880176bef5f8 ffff880100000030 ffff880176bef668 ffff8800773c7c88 ffff880178288098 ffff8800772c0010 ffff8800773c7818 0000000000000001 ffff880176bef648 ffffffff8150a86e Call Trace: [<ffffffff8199867f>] ? printk+0x46/0x48 [<ffffffff8150a86e>] intel_unmap_page+0xe/0x10 [<ffffffffa039d99b>] ismt_access+0x27b/0x8fa [i2c_ismt] [<ffffffff81554420>] ? __pm_runtime_suspend+0xa0/0xa0 [<ffffffff815544a0>] ? pm_suspend_timer_fn+0x80/0x80 [<ffffffff81554420>] ? __pm_runtime_suspend+0xa0/0xa0 [<ffffffff815544a0>] ? pm_suspend_timer_fn+0x80/0x80 [<ffffffff8143dfd0>] ? pci_bus_read_dev_vendor_id+0xf0/0xf0 [<ffffffff8172b36c>] i2c_smbus_xfer+0xec/0x4b0 [<ffffffff810aa4d5>] ? vprintk_emit+0x345/0x530 [<ffffffffa038936b>] i2cdev_ioctl_smbus+0x12b/0x240 [i2c_dev] [<ffffffff810aa829>] ? vprintk_default+0x29/0x40 [<ffffffffa0389b33>] i2cdev_ioctl+0x63/0x1ec [i2c_dev] [<ffffffff811b04c8>] do_vfs_ioctl+0x328/0x5d0 [<ffffffff8119d8ec>] ? vfs_write+0x11c/0x190 [<ffffffff8109d449>] ? rt_up_read+0x19/0x20 [<ffffffff811b07f1>] SyS_ioctl+0x81/0xa0 [<ffffffff819a351b>] system_call_fastpath+0x16/0x6e This happen When run "i2cdetect -y 0" detect SMBus iSMT adapter. After finished I2C block read/write, when unmap the data buffer, a wrong device address was pass to dma_unmap_single(). To fix this, give dma_unmap_single() the "dev" parameter, just like what dma_map_single() does, then unmap can find the right devices. Fixes: 13f35ac1 ("i2c: Adding support for Intel iSMT SMBus 2.0 host controller") Signed-off-by:
Liwei Song <liwei.song@windriver.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Andrey Konovalov authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit 0e410e15 upstream. With KASAN enabled the kernel has two different memset() functions, one with KASAN checks (memset) and one without (__memset). KASAN uses some macro tricks to use the proper version where required. For example memset() calls in mm/slub.c are without KASAN checks, since they operate on poisoned slab object metadata. The issue is that clang emits memset() calls even when there is no memset() in the source code. They get linked with improper memset() implementation and the kernel fails to boot due to a huge amount of KASAN reports during early boot stages. The solution is to add -fno-builtin flag for files with KASAN_SANITIZE := n marker. Link: http://lkml.kernel.org/r/8ffecfffe04088c52c42b92739c2bd8a0bcb3f5e.1516384594.git.andreyknvl@google.comSigned-off-by:
Andrey Konovalov <andreyknvl@google.com> Acked-by:
Nick Desaulniers <ndesaulniers@google.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1792310 The 4.4.y stable backport dc6ae4df for the upstream commit 3d4bf93a ("tcp: detect malicious patterns in tcp_collapse_ofo_queue()") missed a line that enlarges the range_truesize value, which broke the whole check. Fixes: dc6ae4df ("tcp: detect malicious patterns in tcp_collapse_ofo_queue()") Signed-off-by:
-
Toshi Kani authored
BugLink: https://bugs.launchpad.net/bugs/1792310 commit f967db0b upstream. ioremap() supports pmd mappings on x86-PAE. However, kernel's pmd tables are not shared among processes on x86-PAE. Therefore, any update to sync'd pmd entries need re-syncing. Freeing a pte page also leads to a vmalloc fault and hits the BUG_ON in vmalloc_sync_one(). Disable free page handling on x86-PAE. pud_free_pmd_page() and pmd_free_pte_page() simply return 0 if a given pud/pmd entry is present. This assures that ioremap() does not update sync'd pmd entries at the cost of falling back to pte mappings. Fixes: 28ee90fe ("x86/mm: implement free pmd/pte page interfaces") Reported-by:
Joerg Roedel <joro@8bytes.org> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1792174Signed-off-by:
-
Vlastimil Babka authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 792adb90 upstream. The introduction of generic_max_swapfile_size and arch-specific versions has broken linking on x86 with CONFIG_SWAP=n due to undefined reference to 'generic_max_swapfile_size'. Fix it by compiling the x86-specific max_swapfile_size() only with CONFIG_SWAP=y. Reported-by:
Tomas Pruzina <pruzinat@gmail.com> Fixes: 377eeaa8 ("x86/speculation/l1tf: Limit swap file size to MAX_PA/2") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: stable@vger.kernel.org Signed-off-by:
-
Andi Kleen authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 1063711b upstream The mmio tracer sets io mapping PTEs and PMDs to non present when enabled without inverting the address bits, which makes the PTE entry vulnerable for L1TF. Make it use the right low level macros to actually invert the address bits to protect against L1TF. In principle this could be avoided because MMIO tracing is not likely to be enabled on production machines, but the fix is straigt forward and for consistency sake it's better to get rid of the open coded PTE manipulation. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Dan Williams authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 87744ab3 upstream vm_insert_mixed() unlike vm_insert_pfn_prot() and vmf_insert_pfn_pmd(), fails to check the pgprot_t it uses for the mapping against the one recorded in the memtype tracking tree. Add the missing call to track_pfn_insert() to preclude cases where incompatible aliased mappings are established for a given physical address range. [groeck: Backport to v4.4.y] Link: http://lkml.kernel.org/r/147328717909.35069.14256589123570653697.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
-
Andy Lutomirski authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit 1745cbc5 upstream The x86 vvar vma contains pages with differing cacheability flags. x86 currently implements this by manually inserting all the ptes using (io_)remap_pfn_range when the vma is set up. x86 wants to move to using .fault with VM_FAULT_NOPAGE to set up the mappings as needed. The correct API to use to insert a pfn in .fault is vm_insert_pfn(), but vm_insert_pfn() can't override the vma's cache mode, and the HPET page in particular needs to be uncached despite the fact that the rest of the VMA is cached. Add vm_insert_pfn_prot() to support varying cacheability within the same non-COW VMA in a more sane manner. x86 could alternatively use multiple VMAs, but that's messy, would break CRIU, and would create unnecessary VMAs that would waste memory. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Reviewed-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1792174 This brings arch/x86/include/asm/pgtable.h in sync with upstream stable (4.4.155 in this case because 4.4.148 still seems to miss some fixup). Effectively this replaces the open coded version of pud_mkhuge() we were using by one using pud_set_flags()- And also adds pud_set/clear_flags(). I did not make the change in pfn_pud: - phys_addr_t pfn = (phys_addr_t)page_nr << PAGE_SHIFT; + phys_addr_t pfn = page_nr << PAGE_SHIFT; Maybe the conversion is not necessary but it should not hurt either. The remaining changes are only whitespace/linebreak ones. Signed-off-by:
-
Stefan Bader authored
BugLink: https://bugs.launchpad.net/bugs/1792174 Adjusts formatting (no code change) to match current upstream stable 4.4.148. Signed-off-by:
-
Naoya Horiguchi authored
BugLink: https://bugs.launchpad.net/bugs/1792174 commit eee4818b upstream _PAGE_PSE is used to distinguish between a truly non-present (_PAGE_PRESENT=0) PMD, and a PMD which is undergoing a THP split and should be treated as present. But _PAGE_SWP_SOFT_DIRTY currently uses the _PAGE_PSE bit, which would cause confusion between one of those PMDs undergoing a THP split, and a soft-dirty PMD. Dropping _PAGE_PSE check in pmd_present() does not work well, because it can hurt optimization of tlb handling in thp split. Thus, we need to move the bit. In the current kernel, bits 1-4 are not used in non-present format since commit 00839ee3 ("x86/mm: Move swap offset/type up in PTE to work around erratum"). So let's move _PAGE_SWP_SOFT_DIRTY to bit 1. Bit 7 is used as reserved (always clear), so please don't use it for other purpose. [dwmw2: Pulled in to 4.9 backport to support L1TF changes] Link: http://lkml.kernel.org/r/20170717193955.20207-3-zi.yan@sent.comSigned-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Zi Yan <zi.yan@cs.rutgers.edu> Acked-by:
Dave Hansen <dave.hansen@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by:
-
