- 17 Sep, 2015 7 commits
-
-
Johan Hovold authored
Add optional cport enable and disable callbacks to the greybus host drivers, that can be used to initialise and allocate/release resources associated with a cport during connection setup/teardown (e.g. software queues and hardware state). Signed-off-by:
Johan Hovold <johan@hovoldconsulting.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@google.com>
-
Johan Hovold authored
Add protocol-version to improve readability. Signed-off-by:
-
Johan Hovold authored
Add control-connected helper to improve readability. Signed-off-by:
-
Johan Hovold authored
Rename helper to the more descriptive gb_connection_control_disconnected(). Use u16 for cport number, remove redundant cport number from warning message, and shorten a long line. Signed-off-by:
-
Johan Hovold authored
Clearly mark error-path labels as such and clean up control flow. Signed-off-by:
-
Johan Hovold authored
Move SVC-connection creation to its own helper. Note that the connection_create host-driver callback is really unrelated to the SVC connection, and will be removed by a later patch. It is is included for now as the connection_destroy callback is currently made from the SVC-connection-destroy helper. Signed-off-by:
-
Fabien Parent authored
The SVC Control request is obsolete and not used anymore. Remove the related define. Signed-off-by:
Fabien Parent <fparent@baylibre.com> Reviewed-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
- 15 Sep, 2015 33 commits
-
-
Rui Miguel Silva authored
Some fields in svc request were not being set with the correct endianness, which will trigger the following sparse issues as example: greybus/svc.c:116:22: warning: incorrect type in assignment (different base types) greybus/svc.c:116:22: expected unsigned short [unsigned] [assigned] [usertype] attr greybus/svc.c:116:22: got restricted __le16 [usertype] <noident> Signed-off-by:
Rui Miguel Silva <rui.silva@linaro.org> Reviewed-by:
-
Johan Hovold authored
Add the missing version-request definition that was falsely claimed to be empty. Update the generic version-request helper and SVC version-request handler to use the request definition rather than rely on the response happening to have the same layout, something which also improves readability. Remove a misplaced "Control Protocol" header while at it. Signed-off-by:
-
Johan Hovold authored
The SVC-protocol driver currently accepts the version offered by the SVC, but still responded with a hard-coded version. Signed-off-by:
-
Johan Hovold authored
The device-id map was never deallocated on SVC-connection tear down. Also make the map per-SVC-connection (there should still be only one) rather than use a global pointer. Reviewed-by:
-
Alexandre Bailon authored
Signed-off-by:
Alexandre Bailon <abailon@baylibre.com> Reviewed-by:
-
Alexandre Bailon authored
Endpoints pair will only be managed by es2 driver. map_cport_to_ep() and unmap_cport() should be static. Signed-off-by:
-
Alexandre Bailon authored
Some methods and variables name were a lot confusing. Replace it or add ep_pair in methods or varaibles name to make sources less confusing. Signed-off-by:
-
Johan Hovold authored
A single global work-queue pointer was used for the per-connection workqueue, something which would lead to memory leaks and all sorts of bad things if there are ever more than one SDIO connection in a system. Also add the missing error handling when allocating the queue. Signed-off-by:
-
Johan Hovold authored
The mmc-driver private data must not be accessed after mmc_free_host() has released it. Signed-off-by:
-
Johan Hovold authored
Do not release the minor number until after the device has been deregistered. Signed-off-by:
-
Viresh Kumar authored
Module's Bootrom needs a way to know (currently), when to start sending requests to the AP. The version request is sent before connection_init() routine is called, and if the module sends the request right after receiving version request, the connection->private field will be NULL. Fix this TEMPORARILY by sending an AP_READY request. Reviewed-by:
-
Viresh Kumar authored
That's how the bootrom-tool names it, and that's how the kernel should expect it. Reviewed-by:
-
Viresh Kumar authored
All the id-fields are 32 bit long instead of 16 bits and so we will need 8 characters per field instead of four. Also the stage field is only one byte long and so needs just two characters to represent it. Reported-by:
-
Viresh Kumar authored
28 is the wrong value and should be 32 instead. Reviewed-by:
-
Viresh Kumar authored
These are required to get/set DME attributes of the modules. This is implemented based on the greybus specifications. Reviewed-by:
-
Bryan O'Donoghue authored
dev_name() will give a nice string representing the end0:X:Y:Z:W name mitigating the need to pick apart the various nested data structures and print out their various identifiers. Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Suggested-by:
Patrick Titiano <ptitiano@baylibre.com> Signed-off-by:
-
Bryan O'Donoghue authored
In order to extract timestamps from gb_message instead of gb_connection we will need access to the gb_operation structure. A first step to that is to create our own gb_loopback_operation_sync which will call gb_operation_request_send_sync() directly. Once loopback is using this function internally it will be possible to convert to gb_message based timestamps and drop gb_connection based timestamps in two seperate patches. Signed-off-by:
-
Bryan O'Donoghue authored
In user-space we specify a list of connections as a bit-mask with the assumption that a list such is indexed as indicated below. end0:3:3:1:1 = 1 end0:3:3:2:3 = 2 end0:3:3:3:4 = 4 Current code assigns bitmask ids based on the order of discovery, however user-space has no idea what the order of discovery is. This patch sorts the linked list of connections associated with the loopback driver and assigns a bit-id based on the sorted list - not the order of discovery. This change therefore enforces the end-users idea that end0:3:3:1:1 above is always denoted by bit 1 - even if from the AP's perspective it was the last entry discovered. Signed-off-by:
-
Bryan O'Donoghue authored
This patch adds a len field to the loopback protocol. This field is validated in gb_loopback_transfer() and stuffed in gb_loopback_request_recv(). Signed-off-by:
-
Bryan O'Donoghue authored
This patch fixes and invalid use of pr_info() in favour of dev_err(); Signed-off-by:
-
Bryan O'Donoghue authored
bdd4bba4 ('greybus/loopback: add module level sys/debug fs data points') added a sysfs entry attached to gb_dev but missed the jump to out_sysfs_dev This patchs fixes the missing jump to out_sysfs_dev. Signed-off-by: -
Bryan O'Donoghue authored
bdd4bba4 ('greybus/loopback: add module level sys/debug fs data points') added a debugfs entry attached to gb_dev but omitted the cleanup on gb_init error and gb_exit. This patchs fixes the missing debugfs_remove(). Signed-off-by: -
Bryan O'Donoghue authored
init doesn't have a lock for kzalloc so exit shouldn't have lock with the corresponding kfree. Signed-off-by:
-
Bryan O'Donoghue authored
This patch holds gb_dev.mutex for the duration of init and exit to reduce complexity while ensuring that init and exit run atomically with respect to slave threads @ gb_loopback_fn(). Signed-off-by:
-
Bryan O'Donoghue authored
This patches fixes a case where gb_dev.count is decremented too late in the exit() routine. Signed-off-by:
-
Viresh Kumar authored
Its a very useful piece of information, i.e. the cport id of the AP to which the cport of the module is connected, and is required lots of times. It isn't known in advance as it is allocated at runtime. This patch creates another file 'ap_cport_id', only for the connection directories, which will give the cport id of the AP. Signed-off-by:
-
Viresh Kumar authored
We created two-way routes between the AP and module's interface on hotplug, and forgot to remove them on hot-unplug. The same is also required while handling errors in hotplug case. Reviewed-by:
-
Viresh Kumar authored
The route-create request creates bi-directional routes and there is no need to make separate calls for setting up routes on both the directions. Signed-off-by:
-
Viresh Kumar authored
This helps in removing special per-protocol code, with the help of generic flags passed by protocol drivers. Reviewed-by:
-
Viresh Kumar authored
connection_create() is called right after svc is requested to create the connection and so connection_destroy() must be called just before we request the SVC to destroy the connection. Over that, this fixes the inconsistency where connection_create() is called for all connections except SVC connection, but connection_destroy() is called always. Acked-by:
-
Viresh Kumar authored
While initializing a connection, the AP requests the SVC to create a connection between a cport on AP and a cport on the Module. The opposite of that is missing, when connection is destroyed or if errors occur after creating the connection. Fix it. Reviewed-by:
-
Viresh Kumar authored
There are two operations which very much work together: - AP asks the SVC to create a connection between a cport of AP and a cport of module. - AP tells the module that the connection is created. Its better (logically) to do these two operations together and so call gb_svc_connection_create() from gb_connection_init() instead. Also check its return value properly. Reviewed-by:
-
Viresh Kumar authored
If we fail to initialize a cport of a bundle, we abort the entire bundle. But that leads to following (unnecessary) warnings as few of the cport descriptors, belonging to the aborted bundle were never parsed: "greybus: excess descriptors in interface manifest" Fix that by releasing all cport descriptors for the aborted bundle. Signed-off-by:
-
