This patch implements the emulator intercept checks for the
RDTSCP, MONITOR, and MWAIT instructions.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

This patch adds the necessary code changes in the
instruction emulator and the extensions to svm.c to
implement intercept checks for the svm instructions.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

This patch add intercept checks into the KVM instruction
emulator to check for the 8 instructions that access the
descriptor table addresses.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

This patch adds the intercept checks for instruction
accessing the debug registers.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

This patch adds all necessary intercept checks for
instructions that access the crX registers.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

This patch adds a callback into kvm_x86_ops so that svm and
vmx code can do intercept checks on emulated instructions.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

This patch adds a flag for the opcoded to tag instruction
which are only recognized in protected mode. The necessary
check is added too.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

This patch adds a check_perm callback for each opcode into
the instruction emulator. This will be used to do all
necessary permission checks on instructions before checking
whether they are intercepted or not.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

This patch prevents the changed CPU state to be written back
when the emulator detected that the instruction was
intercepted by the guest.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Add intercept codes for instructions defined by SVM as
interceptable.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

When running in guest mode, certain instructions can be intercepted by
hardware.  This also holds for nested guests running on emulated
virtualization hardware, in particular instructions emulated by kvm
itself.

This patch adds a framework for intercepting instructions.  If an
instruction is marked for interception, and if we're running in guest
mode, a callback is called to check whether an intercept is needed or
not.  The callback is called at three points in time: immediately after
beginning execution, after checking privilge exceptions, and after
checking memory exception.  This suits the different interception points
defined for different instructions and for the various virtualization
instruction sets.

In addition, a new X86EMUL_INTERCEPT is defined, which any callback or
memory access may define, allowing the more complicated intercepts to be
implemented in existing callbacks.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Signed-off-by: Avi Kivity <avi@redhat.com>

Add support for marking an instruction as SSE, switching registers used
to the SSE register file.
Signed-off-by: Avi Kivity <avi@redhat.com>

Most SIMD instructions use the 66/f2/f3 prefixes to distinguish between
different variants of the same instruction.  Usually the encoding is quite
regular, but in some cases (including non-SIMD instructions) the prefixes
generate very different instructions.  Examples include XCHG/PAUSE,
MOVQ/MOVDQA/MOVDQU, and MOVBE/CRC32.

Allow the emulator to handle these special cases by splitting such opcodes
into groups, with different decode flags and execution functions for different
prefixes.
Signed-off-by: Avi Kivity <avi@redhat.com>

Needed for emulating fpu instructions.
Signed-off-by: Avi Kivity <avi@redhat.com>

Currently we store a rep prefix as 1 or 2 depending on whether it is a REPE or
REPNE.  Since sse instructions depend on the prefix value, store it as the
original opcode to simplify things further on.
Signed-off-by: Avi Kivity <avi@redhat.com>

Since sse instructions can issue 16-byte mmios, we need to support them.  We
can't increase the kvm_run mmio buffer size to 16 bytes without breaking
compatibility, so instead we break the large mmios into two smaller 8-byte
ones.  Since the bus is 64-bit we aren't breaking any atomicity guarantees.
Signed-off-by: Avi Kivity <avi@redhat.com>

Make room for sse mmio completions.
Signed-off-by: Avi Kivity <avi@redhat.com>

Needed for coalesced mmio using sse.
Signed-off-by: Avi Kivity <avi@redhat.com>

Fix race between nmi injection and enabling nmi window in a simpler way.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

This reverts commit f8636849.

Simpler fix to follow.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

As Avi recently mentioned, the new standard mechanism for exposing features
is KVM_GET_SUPPORTED_CPUID, not spamming CAPs. For some reason async pf
missed that.

So expose async_pf here.
Signed-off-by: Glauber Costa <glommer@redhat.com>
CC: Gleb Natapov <gleb@redhat.com>
CC: Avi Kivity <avi@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Use vmx_set_nmi_mask() instead of open-coding management of
the hardware bit and the software hint (nmi_known_unmasked).

There's a slight change of behaviour when running without
hardware virtual NMI support - we now clear the NMI mask if
NMI delivery faulted in that case as well.  This improves
emulation accuracy.
Signed-off-by: Avi Kivity <avi@redhat.com>

We use boot_cpu_has now.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

vmx_complete_atomic_exit() cached it for us, so we can use it here.
Signed-off-by: Avi Kivity <avi@redhat.com>

Only read it if we're going to use it later.
Signed-off-by: Avi Kivity <avi@redhat.com>

Move the exit reason checks to the front of the function, for early
exit in the common case.
Signed-off-by: Avi Kivity <avi@redhat.com>

Check for the exit reason first; this allows us, later,
to avoid a VMREAD for VM_EXIT_INTR_INFO_FIELD.
Signed-off-by: Avi Kivity <avi@redhat.com>

When we haven't injected an interrupt, we don't need to recover
the nmi blocking state (since the guest can't set it by itself).
This allows us to avoid a VMREAD later on.
Signed-off-by: Avi Kivity <avi@redhat.com>

We may read the cpl quite often in the same vmexit (instruction privilege
check, memory access checks for instruction and operands), so we gain
a bit if we cache the value.
Signed-off-by: Avi Kivity <avi@redhat.com>

In long mode, vm86 mode is disallowed, so we need not check for
it.  Reading rflags.vm may require a VMREAD, so it is expensive.
Signed-off-by: Avi Kivity <avi@redhat.com>

If called several times within the same exit, return cached results.
Signed-off-by: Avi Kivity <avi@redhat.com>

Some rflags bits are owned by the host, not guest, so we need to use
kvm_get_rflags() to strip those bits away or kvm_set_rflags() to add them
back.
Signed-off-by: Avi Kivity <avi@redhat.com>

We can get memslot id from memslot->id directly
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits)
  slcan: fix ldisc->open retval
  net/usb: mark LG VL600 LTE modem ethernet interface as WWAN
  xfrm: Don't allow esn with disabled anti replay detection
  xfrm: Assign the inner mode output function to the dst entry
  net: dev_close() should check IFF_UP
  vlan: fix GVRP at dismantle time
  netfilter: revert a2361c87
  netfilter: IPv6: fix DSCP mangle code
  netfilter: IPv6: initialize TOS field in REJECT target module
  IPVS: init and cleanup restructuring
  IPVS: Change of socket usage to enable name space exit.
  netfilter: ebtables: only call xt_compat_add_offset once per rule
  netfilter: fix ebtables compat support
  netfilter: ctnetlink: fix timestamp support for new conntracks
  pch_gbe: support ML7223 IOH
  PCH_GbE : Fixed the issue of checksum judgment
  PCH_GbE : Fixed the issue of collision detection
  NET: slip, fix ldisc->open retval
  be2net: Fixed bugs related to PVID.
  ehea: fix wrongly reported speed and port
  ...

This reverts commit 4a5fa359, which did not allow SLUB to be used
on architectures that use DISCONTIGMEM without compiling NUMA support
without CONFIG_BROKEN also set.

The slub panic that it was intended to prevent is addressed by
d9b41e0b ("[PARISC] set memory ranges in N_NORMAL_MEMORY when
onlined") on parisc so there is no further slub issues with such a
configuration.

The reverts allows SLUB now to be used on such architectures since
there haven't been any reports of additional errors.

Cc: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

TTY layer expects 0 if the ldisc->open operation succeeded.
Reported-by: Matvejchikov Ilya <matvejchikov@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Like other mobile broadband device ethernet interfaces, mark the LG
VL600 with the 'wwan' devtype so userspace knows it needs additional
configuration via the AT port before the interface can be used.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unlike the standard case, disabled anti replay detection needs some
nontrivial extra treatment on ESN. RFC 4303 states:

Note: If a receiver chooses to not enable anti-replay for an SA, then
the receiver SHOULD NOT negotiate ESN in an SA management protocol.
Use of ESN creates a need for the receiver to manage the anti-replay
window (in order to determine the correct value for the high-order
bits of the ESN, which are employed in the ICV computation), which is
generally contrary to the notion of disabling anti-replay for an SA.

So return an error if an ESN state with disabled anti replay detection
is inserted for now and add the extra treatment later if we need it.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>