- 24 Apr, 2020 7 commits
-
-
Ville Syrjälä authored
Change intel_{gmch,pch}_panel_fitting() to return a normal error vs. success int. We'll need this later to validate that the margin properties aren't misconfigured. Signed-off-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200422161917.17389-6-ville.syrjala@linux.intel.comReviewed-by:
Manasi Navare <manasi.d.navare@intel.com>
-
Ville Syrjälä authored
Pass the entire connector state to intel_{gmch,pch}_panel_fitting(). For now we just need to get at .scaling_mode but in the future we'll want access to the margin properties as well. v2: Deal with intel_dp_ycbcr420_config() Signed-off-by: -
Ville Syrjälä authored
Follow the new naming convention and call the crtc state "crtc_state", and while at it drop the redundant crtc argument. Signed-off-by:
-
Ville Syrjälä authored
Make things a bit more abstract by replacing the pch_pfit.pos/size raw register values with a drm_rect. Makes it slighly more convenient to eg. compute the scaling factors. v2: Use drm_rect_init() Signed-off-by:
-
Ville Syrjälä authored
Most of the pfit functions are of the form: func() { if (pfit_enabled) { ... } } Flip the pfit_enabled check around to flatten the functions. And while we're touching all this let's do the usual s/pipe_config/crtc_state/ replacement. Reviewed-by: -
Ville Syrjälä authored
Fix skl_update_scaler_crtc() to deal with different scaling modes correctly. The current implementation assumes DRM_MODE_SCALE_FULLSCREEN. Fortunately we don't expose any border properties currently so the code does actually end up doing the right thing (assigning a scaler for pfit). The code does need to be fixed before any borders are exposed. Also we have redundant calls to skl_update_scaler_crtc() in dp/hdmi .compute_config() which can be nuked. They were anyway called before we had even computed the pfit state so were basically nonsense. The real call we need to keep is in intel_crtc_atomic_check(). v2: Deal witrh skl_update_scaler_crtc() in intel_dp_ycbcr420_config() Reviewed-by:
-
Chris Wilson authored
The history of i915_vma_close() is confusing, as is its use. As the lifetime of the i915_vma is currently bounded by the object it is attached to, we needed a means of identify when a vma was no longer in use by userspace (via the user's fd). This is further complicated by that only ppgtt vma should be closed at the user's behest, as the ggtt were always shared. Now that we attach the vma to a lut on the user's context, the open count does indicate how many unique and open context/vm are referencing this vma from the user. As such, we can and should just use the open_count to track when the vma is still in use by userspace. It's a poor man's replacement for reference counting. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1193Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200422190558.30509-1-chris@chris-wilson.co.uk
-
- 23 Apr, 2020 6 commits
-
-
Mika Kuoppala authored
More often than not, we need a byte offset into lrc register state from the start of the hw state. Make it so. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
-
Mika Kuoppala authored
Add per ctx bb and indirect ctx bb register locations to live_lrc_fixed for verification. Signed-off-by:
-
Chris Wilson authored
Under ideal circumstances, the driver should be able to keep the GPU fully saturated with work. Measure how close to ideal we get under the harshest of conditions with no user payload. v2: Also measure throughput using only one thread. Signed-off-by:
-
Chris Wilson authored
intel_gt_wait_for_idle() tries to wait until all the outstanding requests are retired and the GPU is idle. As a side effect of retiring requests, we may submit more work to flush any pm barriers, and so the wait-for-idle tries to flush the background pm work and catch the new requests. However, if the work completed in the background before we were able to flush, it would queue the extra barrier request without us noticing -- and so we would return from wait-for-idle with one request remaining. (This breaks e.g. record_default_state where we need to wait until that barrier is retired, and it may slow suspend down by causing us to wait on the background retirement worker as opposed to immediately retiring the barrier.) However, since we track if there has been a submission since the engine pm barrier, we can very quickly detect if the idle barrier is still outstanding. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1763Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200423085940.28168-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
During the virtual engine's submission tasklet, we take the request and insert into the submission queue on each of our siblings. This seems quite simply, and so no problems with ordering. However, the sibling execlists' submission tasklets may run concurrently with the virtual engine's tasklet, submitting the request to HW before the virtual finishes its task of telling all the siblings. If this happens, the sibling tasklet may *reorder* the ve->sibling[] array that the virtual engine tasklet is processing. This can *only* reorder within the elements already processed by the virtual engine, nevertheless the race is detected by KCSAN: [ 185.580014] BUG: KCSAN: data-race in execlists_dequeue [i915] / virtual_submission_tasklet [i915] [ 185.580054] [ 185.580076] write to 0xffff8881f1919860 of 8 bytes by interrupt on cpu 2: [ 185.580553] execlists_dequeue+0x6ad/0x1600 [i915] [ 185.581044] __execlists_submission_tasklet+0x48/0x60 [i915] [ 185.581517] execlists_submission_tasklet+0xd3/0x170 [i915] [ 185.581554] tasklet_action_common.isra.0+0x42/0x90 [ 185.581585] __do_softirq+0xc8/0x206 [ 185.581613] run_ksoftirqd+0x15/0x20 [ 185.581641] smpboot_thread_fn+0x15a/0x270 [ 185.581669] kthread+0x19a/0x1e0 [ 185.581695] ret_from_fork+0x1f/0x30 [ 185.581717] [ 185.581736] read to 0xffff8881f1919860 of 8 bytes by interrupt on cpu 0: [ 185.582231] virtual_submission_tasklet+0x10e/0x5c0 [i915] [ 185.582265] tasklet_action_common.isra.0+0x42/0x90 [ 185.582291] __do_softirq+0xc8/0x206 [ 185.582315] run_ksoftirqd+0x15/0x20 [ 185.582340] smpboot_thread_fn+0x15a/0x270 [ 185.582368] kthread+0x19a/0x1e0 [ 185.582395] ret_from_fork+0x1f/0x30 [ 185.582417] We can prevent this race by checking for the ve->request after looking up the sibling array. Signed-off-by:
-
Imre Deak authored
Fix the check for when an AUX power well enabling timeout is expected on a legacy TypeC port. Fixes: 89e01caa ("drm/i915: Use single set of AUX powerwell ops for gen11+") Cc: Matt Roper <matthew.d.roper@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200422123440.19522-1-imre.deak@intel.com
-
- 22 Apr, 2020 4 commits
-
-
Chris Wilson authored
When we migrated to execlists, one of the conditions we wanted to test for was whether the breadcrumb seqno was being written before the breadcumb interrupt was delivered. This was following on from issues observed on previous generations which were not so strongly ordered. With the removal of the missed interrupt detection, we have not reliable means of detecting the out-of-order seqno/interrupt but instead tried to assert that the relationship between the CS event interrupt and the breadwrite should be strongly ordered. However, Icelake proves it is possible for the HW implementation to forget about minor little details such as write ordering and so the order between *processing* the CS event and the breadcrumb is unreliable. Remove the unreliable assertion, but leave a debug telltale in case we have reason to suspect. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1658Signed-off-by:
-
Chris Wilson authored
While the ggtt vma are protected by their object lifetime, the list continues until it hits a non-ggtt vma, and that vma is not protected and may be freed as we inspect it. Hence, we require the obj->vma.lock to protect the list as we iterate. An example of forgetting to hold the obj->vma.lock is [1642834.464973] general protection fault, probably for non-canonical address 0xdead000000000122: 0000 [#1] SMP PTI [1642834.464977] CPU: 3 PID: 1954 Comm: Xorg Not tainted 5.6.0-300.fc32.x86_64 #1 [1642834.464979] Hardware name: LENOVO 20ARS25701/20ARS25701, BIOS GJET94WW (2.44 ) 09/14/2017 [1642834.465021] RIP: 0010:i915_gem_object_set_tiling+0x2c0/0x3e0 [i915] [1642834.465024] Code: 8b 84 24 18 01 00 00 f6 c4 80 74 59 49 8b 94 24 a0 00 00 00 49 8b 84 24 e0 00 00 00 49 8b 74 24 10 48 8b 92 30 01 00 00 89 c7 <80> ba 0a 06 00 00 03 0f 87 86 00 00 00 ba 00 00 08 00 b9 00 00 10 [1642834.465025] RSP: 0018:ffffa98780c77d60 EFLAGS: 00010282 [1642834.465028] RAX: ffff8d232bfb2578 RBX: 0000000000000002 RCX: ffff8d25873a0000 [1642834.465029] RDX: dead000000000122 RSI: fffff0af8ac6e408 RDI: 000000002bfb2578 [1642834.465030] RBP: ffff8d25873a0000 R08: ffff8d252bfb5638 R09: 0000000000000000 [1642834.465031] R10: 0000000000000000 R11: ffff8d252bfb5640 R12: ffffa987801cb8f8 [1642834.465032] R13: 0000000000001000 R14: ffff8d233e972e50 R15: ffff8d233e972d00 [1642834.465034] FS: 00007f6a3d327f00(0000) GS:ffff8d25926c0000(0000) knlGS:0000000000000000 [1642834.465036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1642834.465037] CR2: 00007f6a2064d000 CR3: 00000002fb57c001 CR4: 00000000001606e0 [1642834.465038] Call Trace: [1642834.465083] i915_gem_set_tiling_ioctl+0x122/0x230 [i915] [1642834.465121] ? i915_gem_object_set_tiling+0x3e0/0x3e0 [i915] [1642834.465151] drm_ioctl_kernel+0x86/0xd0 [drm] [1642834.465156] ? avc_has_perm+0x3b/0x160 [1642834.465178] drm_ioctl+0x206/0x390 [drm] [1642834.465216] ? i915_gem_object_set_tiling+0x3e0/0x3e0 [i915] [1642834.465221] ? selinux_file_ioctl+0x122/0x1c0 [1642834.465226] ? __do_munmap+0x24b/0x4d0 [1642834.465231] ksys_ioctl+0x82/0xc0 [1642834.465235] __x64_sys_ioctl+0x16/0x20 [1642834.465238] do_syscall_64+0x5b/0xf0 [1642834.465243] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [1642834.465245] RIP: 0033:0x7f6a3d7b047b [1642834.465247] Code: 0f 1e fa 48 8b 05 1d aa 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed a9 0c 00 f7 d8 64 89 01 48 [1642834.465249] RSP: 002b:00007ffe71adba28 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [1642834.465251] RAX: ffffffffffffffda RBX: 000055f99048fa40 RCX: 00007f6a3d7b047b [1642834.465253] RDX: 00007ffe71adba30 RSI: 00000000c0106461 RDI: 000000000000000e [1642834.465254] RBP: 0000000000000002 R08: 000055f98f3f1798 R09: 0000000000000002 [1642834.465255] R10: 0000000000001000 R11: 0000000000000246 R12: 0000000000000080 [1642834.465257] R13: 000055f98f3f1690 R14: 00000000c0106461 R15: 00007ffe71adba30 Now to take the spinlock during the list iteration, we need to break it down into two phases. In the first phase under the lock, we cannot sleep and so must defer the actual work to a second list, protected by the ggtt->mutex. We also need to hold the spinlock during creation of a new vma to serialise with updates of the tiling on the object. Reported-by:
Dave Airlie <airlied@redhat.com> Fixes: 2850748e ("drm/i915: Pull i915_vma_pin under the vm->mutex") Signed-off-by:
-
Chris Wilson authored
Since batch buffers dominant execution time, most preemption requests should naturally occur during execution of a batch buffer. We wish to verify that should a preemption occur within a batch buffer, when we come to restart that batch buffer, it occurs at the interrupted instruction and most importantly does not rollback to an earlier point. v2: Do not clear the GPR at the start of the batch, but rely on them being clear for new contexts. Suggested-by:
-
Chris Wilson authored
For verifying reciving the EI interrupts, we need to hold the GPU in very precise conditions (in terms of C0 cycles during the EI). If we preempt the busy load to handle the heartbeat, this may perturb the busy load causing us to miss the interrupt. The other tests, while not as time sensitive, may also be slightly perturbed, so apply the heartbeat protection across all the measurements. Signed-off-by:
-
- 21 Apr, 2020 18 commits
-
-
Chris Wilson authored
Having noticed that MI_BB_START is incurring a memory stall (see the correlation with uncore frequency), we have to unroll the loop in order to diminish the impact of the MI_BB_START on the instruction throughput. Signed-off-by:
-
Chris Wilson authored
Since we may lose the content of any buffer when we relinquish control of the system (e.g. suspend/resume), we have to be careful not to rely on regaining control. A good method to detect when we might be using garbage is by always injecting that garbage prior to first use on load/resume/etc. v2: Drop sanitize callback on cleanup v3: Move seqno reset to timeline enter, so we reset all timelines. However, this is done on every activation during runtime and not reset. The similar level of paranoia we apply to correcting context state after a period of inactivity. Suggested-by:
-
Chris Wilson authored
Let's isolate the impact of cpu frequency selection on determing the GPU throughput in response to selection of RPS frequencies. For real systems, we do have to be concerned with the impact of integrating c-states, p-states and rp-states, but for the sake of proving whether or not RPS works, one baby step at a time. For the record, as one would hope, it does not seem to impact on the measured performance, but we do it anyway to reduce the number of variables. Later, we can extend the testing to encourage the the cpu/pkg to try and sleep while the GPU is busy. Signed-off-by:
-
Chris Wilson authored
If we detect that the RPS end points do not scale perfectly, take the time to measure all the in between values as well. We are aborting the test, so we might as well spend the available time gathering critical debug information instead. Signed-off-by:
-
Chris Wilson authored
We want to see the pstate limits whenever we fail to set the minimum frequency as that may help for debugging. Signed-off-by:
-
Pankaj Bharadiya authored
struct drm_device specific drm_WARN* macros include device information in the backtrace, so we know what device the warnings originate from. Prefer drm_WARN_ON over WARN_ON. Signed-off-by:
Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200406112800.23762-14-pankaj.laxminarayan.bharadiya@intel.com
-
Pankaj Bharadiya authored
struct drm_device specific drm_WARN* macros include device information in the backtrace, so we know what device the warnings originate from. Prefer drm_WARN_ON over WARN_ON. Signed-off-by:
-
Pankaj Bharadiya authored
struct drm_device specific drm_WARN* macros include device information in the backtrace, so we know what device the warnings originate from. Prefer drm_WARN* over WARN* calls. Signed-off-by:
-
Pankaj Bharadiya authored
struct drm_device specific drm_WARN* macros include device information in the backtrace, so we know what device the warnings originate from. Prefer drm_WARN_ON over WARN_ON. Signed-off-by:
-
Pankaj Bharadiya authored
struct drm_device specific drm_WARN* macros include device information in the backtrace, so we know what device the warnings originate from. Prefer drm_WARN_ON over WARN_ON at places where struct drm_device pointer can be extracted. Signed-off-by:
-
Pankaj Bharadiya authored
struct drm_device specific drm_WARN* macros include device information in the backtrace, so we know what device the warnings originate from. Prefer drm_WARN_ON over WARN_ON at places where struct drm_device pointer can be extracted. Signed-off-by:
-
Pankaj Bharadiya authored
struct drm_device specific drm_WARN* macros include device information in the backtrace, so we know what device the warnings originate from. Prefer drm_WARN* over WARN* calls. Signed-off-by:
-
Pankaj Bharadiya authored
struct drm_device specific drm_WARN* macros include device information in the backtrace, so we know what device the warnings originate from. Prefer drm_WARN_ON over WARN_ON. Signed-off-by:
-
Pankaj Bharadiya authored
struct drm_device specific drm_WARN* macros include device information in the backtrace, so we know what device the warnings originate from. Prefer drm_WARN_ON over WARN_ON. Signed-off-by:
-
Jani Nikula authored
The early check for compressed_bpp being zero is too early, as it is hit also when DSC is not enabled. Move the checks down to where the values are actually needed. This is a paranoid check for a situation that should not happen, so we don't really care about handling it gracefully apart from not oopsing. Fixes: 48b8b04c ("drm/i915/display: Enable DP Display Audio WA") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1750 Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
Jani Nikula authored
Remove a number of inlines from .c files, and let the compiler decide what's best. There's more to do, but need to start somewhere, and need to start setting the example. Acked-by:
-
Jani Nikula authored
Unused, hiding from the compiler warnings behind the inline keyword. Reviewed-by:
-
Matt Roper authored
AUX power wells sometimes need additional handling besides just programming the specific power well registers: * Type-C PHY's also require additional Type-C register programming * ICL combo PHY's require additional workarounds * TGL & EHL combo PHY's can be treated like any other power well Today we have dedicated aux ops for the ICL combo PHY and Type-C cases. This works fine, but means that when a new platform shows up with identical general power well handling, but different types of PHYs on its outputs, we have to define an entire new power well table for that platform and can't just re-use the table from the earlier platform -- as an example, see ehl_power_wells[], which is a subset of icl_power_wells[], *except* that we need to specify different AUX ops for the third display. If we instead create a single set of top-level aux ops that will check the PHY type and then dispatch to the appropriate handlers, we can get more reuse out of our power well definitions. This allows us to immediately eliminate ehl_power_wells[] and simply reuse the ICL table; if future platforms follow the same general power well assignments as either ICL or TGL, we'll be able to re-use those tables in the same way. Note that I've only changed ICL+ platforms over to using the new icl_aux ops; at this point it's unlikely that we'll have any new platforms that re-use gen9 or earlier power well configurations. v2: - ICL_AUX_PW_TO_PHY() won't return the proper PHY for TBT AUX power wells. But we know those wells will only used on Type-C outputs anyway, so we can just check is is_tc_tbt flag in the condition. (Jose). Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
- 20 Apr, 2020 5 commits
-
-
Xiyu Yang authored
igt_ppgtt_pin_update() invokes i915_gem_context_get_vm_rcu(), which returns a reference of the i915_address_space object to "vm" with increased refcount. When igt_ppgtt_pin_update() returns, "vm" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in two exception handling paths of igt_ppgtt_pin_update(). When i915_gem_object_create_internal() returns IS_ERR, the refcnt increased by i915_gem_context_get_vm_rcu() is not decreased, causing a refcnt leak. Fix this issue by jumping to "out_vm" label when i915_gem_object_create_internal() returns IS_ERR. Fixes: a4e7ccda ("drm/i915: Move context management under GEM") Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Reviewed-by:
-
Chris Wilson authored
After having testing all the RPS controls individually, we need to take a step back and check how our RPS worker integrates them to perform dynamic GPU reclocking. So do that by submitting a spinner and wait and see what happens. Signed-off-by:
-
Chris Wilson authored
If we encounter an error while scaling, read back the frequency tables from the pcu. Signed-off-by:
-
Chris Wilson authored
Split the frequency measurement into two modes, so that we can judge the impact of the llc setup on top of the pure CS frequency scaling. Signed-off-by:
-
Chris Wilson authored
Check that the GPU does respond to our RPS frequency requests by setting our desired frequency. Signed-off-by:
-
