Pull final round of SCSI updates from James Bottomley:
 "Sorry for the delay in this patch which was mostly caused by getting
  the merger of the mpt2/mpt3sas driver, which was seen as an essential
  item of maintenance work to do before the drivers diverge too much.
  Unfortunately, this caused a compile failure (detected by linux-next),
  which then had to be fixed up and incubated.

  In addition to the mpt2/3sas rework, there are updates from pm80xx,
  lpfc, bnx2fc, hpsa, ipr, aacraid, megaraid_sas, storvsc and ufs plus
  an assortment of changes including some year 2038 issues, a fix for a
  remove before detach issue in some drivers and a couple of other minor
  issues"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
  mpt3sas: fix inline markers on non inline function declarations
  sd: Clear PS bit before Mode Select.
  ibmvscsi: set max_lun to 32
  ibmvscsi: display default value for max_id, max_lun and max_channel.
  mptfusion: don't allow negative bytes in kbuf_alloc_2_sgl()
  scsi: pmcraid: replace struct timeval with ktime_get_real_seconds()
  mvumi: 64bit value for seconds_since1970
  be2iscsi: Fix bogus WARN_ON length check
  scsi_scan: don't dump trace when scsi_prep_async_scan() is called twice
  mpt3sas: Bump mpt3sas driver version to 09.102.00.00
  mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs
  mpt2sas, mpt3sas: Update the driver versions
  mpt3sas: setpci reset kernel oops fix
  mpt3sas: Added OEM Gen2 PnP ID branding names
  mpt3sas: Refcount fw_events and fix unsafe list usage
  mpt3sas: Refcount sas_device objects and fix unsafe list usage
  mpt3sas: sysfs attribute to report Backup Rail Monitor Status
  mpt3sas: Ported WarpDrive product SSS6200 support
  mpt3sas: fix for driver fails EEH, recovery from injected pci bus error
  mpt3sas: Manage MSI-X vectors according to HBA device type
  ...

Pull SCSI target updates from Nicholas Bellinger:
 "This series contains HCH's changes to absorb configfs attribute
  ->show() + ->store() function pointer usage from it's original
  tree-wide consumers, into common configfs code.

  It includes usb-gadget, target w/ drivers, netconsole and ocfs2
  changes to realize the improved simplicity, that now renders the
  original include/target/configfs_macros.h CPP magic for fabric drivers
  and others, unnecessary and obsolete.

  And with common code in place, new configfs attributes can be added
  easier than ever before.

  Note, there are further improvements in-flight from other folks for
  v4.5 code in configfs land, plus number of target fixes for post -rc1
  code"

In the meantime, a new user of the now-removed old configfs API came in
through the char/misc tree in commit 7bd1d409 ("stm class: Introduce
an abstraction for System Trace Module devices").

This merge resolution comes from Alexander Shishkin, who updated his stm
class tracing abstraction to account for the removal of the old
show_attribute and store_attribute methods in commit 51798222
("configfs: remove old API") from this pull.  As Alexander says about
that patch:

 "There's no need to keep an extra wrapper structure per item and the
  awkward show_attribute/store_attribute item ops are no longer needed.

  This patch converts policy code to the new api, all the while making
  the code quite a bit smaller and easier on the eyes.

  Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>"

That patch was folded into the merge so that the tree should be fully
bisectable.

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (23 commits)
  configfs: remove old API
  ocfs2/cluster: use per-attribute show and store methods
  ocfs2/cluster: move locking into attribute store methods
  netconsole: use per-attribute show and store methods
  target: use per-attribute show and store methods
  spear13xx_pcie_gadget: use per-attribute show and store methods
  dlm: use per-attribute show and store methods
  usb-gadget/f_serial: use per-attribute show and store methods
  usb-gadget/f_phonet: use per-attribute show and store methods
  usb-gadget/f_obex: use per-attribute show and store methods
  usb-gadget/f_uac2: use per-attribute show and store methods
  usb-gadget/f_uac1: use per-attribute show and store methods
  usb-gadget/f_mass_storage: use per-attribute show and store methods
  usb-gadget/f_sourcesink: use per-attribute show and store methods
  usb-gadget/f_printer: use per-attribute show and store methods
  usb-gadget/f_midi: use per-attribute show and store methods
  usb-gadget/f_loopback: use per-attribute show and store methods
  usb-gadget/ether: use per-attribute show and store methods
  usb-gadget/f_acm: use per-attribute show and store methods
  usb-gadget/f_hid: use per-attribute show and store methods
  ...

Pull vfs xattr cleanups from Al Viro.

* 'for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  f2fs: xattr simplifications
  squashfs: xattr simplifications
  9p: xattr simplifications
  xattr handlers: Pass handler to operations instead of flags
  jffs2: Add missing capability check for listing trusted xattrs
  hfsplus: Remove unused xattr handler list operations
  ubifs: Remove unused security xattr handler
  vfs: Fix the posix_acl_xattr_list return value
  vfs: Check attribute names in posix acl xattr handers

Pull libnvdimm fixes from Dan Williams:

 - three fixes tagged for -stable including a crash fix, simple
   performance tweak, and an invalid i/o error.

 - build regression fix for the nvdimm unit tests

 - nvdimm documentation update

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: fix __dax_pmd_fault crash
  libnvdimm: documentation clarifications
  libnvdimm, pmem: fix size trim in pmem_direct_access()
  libnvdimm, e820: fix numa node for e820-type-12 pmem ranges
  tools/testing/nvdimm, acpica: fix flag rename build breakage

Now that the xattr handler is passed to the xattr handler operations, we
have access to the attribute name prefix, so simplify
f2fs_xattr_generic_list.

Also, f2fs_xattr_advise_list is only ever called for
f2fs_xattr_advise_handler; there is no need to double check for that.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Changman Lee <cm224.lee@samsung.com>
Cc: Chao Yu <chao2.yu@samsung.com>
Cc: linux-f2fs-devel@lists.sourceforge.net
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Now that the xattr handler is passed to the xattr handler operations, we
have access to the attribute name prefix, so simplify the squashfs xattr
handlers a bit.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Now that the xattr handler is passed to the xattr handler operations, we
can use the same get and set operations for the user, trusted, and security
xattr namespaces.  In those namespaces, we can access the full attribute
name by "reattaching" the name prefix the vfs has skipped for us.  Add a
xattr_full_name helper to make this obvious in the code.

For the "system.posix_acl_access" and "system.posix_acl_default"
attributes, handler->prefix is the full attribute name; the suffix is the
empty string.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: v9fs-developer@lists.sourceforge.net
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The xattr_handler operations are currently all passed a file system
specific flags value which the operations can use to disambiguate between
different handlers; some file systems use that to distinguish the xattr
namespace, for example.  In some oprations, it would be useful to also have
access to the handler prefix.  To allow that, pass a pointer to the handler
to operations instead of the flags value alone.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The vfs checks if a task has the appropriate access for get and set
operations, but it cannot do that for the list operation; the file system
must check for that itself.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The list operations can never be called; they are even documented to be
unused.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Ubifs installs a security xattr handler in sb->s_xattr but doesn't use the
generic_{get,set,list,remove}xattr inode operations needed for processing
this list of attribute handlers; the handler is never called.  Instead,
ubifs uses its own xattr handlers which also process security xattrs.

Remove the dead code.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: linux-mtd@lists.infradead.org
Cc: Subodh Nijsure <snijsure@grid-net.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

When a filesystem that contains POSIX ACLs is mounted without ACL support
(-o noacl), the appropriate behavior is not to list any existing POSIX ACL
xattrs.  The return value for list xattr handlers in this case is 0, not an
error code: several filesystems that use the POSIX ACL xattr handlers do
not expect the list operation to fail.

Symlinks cannot have ACLs, so posix_acl_xattr_list will never be called for
symlinks in the first place.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The get and set operations of the POSIX ACL xattr handlers failed to check
the attribute names, so all names with "system.posix_acl_access" or
"system.posix_acl_default" as a prefix were accepted.  Reject invalid names
from now on.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull VFIO updates from Alex Williamson:
 - Use kernel interfaces for VPD emulation (Alex Williamson)
 - Platform fix for releasing IRQs (Eric Auger)
 - Type1 IOMMU always advertises PAGE_SIZE support when smaller mapping
   sizes are available (Eric Auger)
 - Platform fixes for incorrectly using copies of structures rather than
   pointers to structures (James Morse)
 - Rework platform reset modules, fix leak, and add AMD xgbe reset
   module (Eric Auger)
 - Fix vfio_device_get_from_name() return value (Joerg Roedel)
 - No-IOMMU interface (Alex Williamson)
 - Fix potential out of bounds array access in PCI config handling (Dan
   Carpenter)

* tag 'vfio-v4.4-rc1' of git://github.com/awilliam/linux-vfio:
  vfio/pci: make an array larger
  vfio: Include No-IOMMU mode
  vfio: Fix bug in vfio_device_get_from_name()
  VFIO: platform: reset: AMD xgbe reset module
  vfio: platform: reset: calxedaxgmac: fix ioaddr leak
  vfio: platform: add dev_info on device reset
  vfio: platform: use list of registered reset function
  vfio: platform: add compat in vfio_platform_device
  vfio: platform: reset: calxedaxgmac: add reset function registration
  vfio: platform: introduce module_vfio_reset_handler macro
  vfio: platform: add capability to register a reset function
  vfio: platform: introduce vfio-platform-base module
  vfio/platform: store mapped memory in region, instead of an on-stack copy
  vfio/type1: handle case where IOMMU does not support PAGE_SIZE size
  VFIO: platform: clear IRQ_NOAUTOEN when de-assigning the IRQ
  vfio/pci: Use kernel VPD access functions
  vfio: Whitelist PCI bridges

Pull SMB3 updates from Steve French:
 "A collection of SMB3 patches adding some reliability features
  (persistent and resilient handles) and improving SMB3 copy offload.

  I will have some additional patches for SMB3 encryption and SMB3.1.1
  signing (important security features), and also for improving SMB3
  persistent handle reconnection (setting ChannelSequence number e.g.)
  that I am still working on but wanted to get this set in since they
  can stand alone"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  Allow copy offload (CopyChunk) across shares
  Add resilienthandles mount parm
  [SMB3] Send durable handle v2 contexts when use of persistent handles required
  [SMB3] Display persistenthandles in /proc/mounts for SMB3 shares if enabled
  [SMB3] Enable checking for continuous availability and persistent handle support
  [SMB3] Add parsing for new mount option controlling persistent handles
  Allow duplicate extents in SMB3 not just SMB3.1.1

Pull btrfs fixes and cleanups from Chris Mason:
 "Some of this got cherry-picked from a github repo this week, but I
  verified the patches.

  We have three small scrub cleanups and a collection of fixes"

* 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: Use fs_info directly in btrfs_delete_unused_bgs
  btrfs: Fix lost-data-profile caused by balance bg
  btrfs: Fix lost-data-profile caused by auto removing bg
  btrfs: Remove len argument from scrub_find_csum
  btrfs: Reduce unnecessary arguments in scrub_recheck_block
  btrfs: Use scrub_checksum_data and scrub_checksum_tree_block for scrub_recheck_block_checksum
  btrfs: Reset sblock->xxx_error stats before calling scrub_recheck_block_checksum
  btrfs: scrub: setup all fields for sblock_to_check
  btrfs: scrub: set error stats when tree block spanning stripes
  Btrfs: fix race when listing an inode's xattrs
  Btrfs: fix race leading to BUG_ON when running delalloc for nodatacow
  Btrfs: fix race leading to incorrect item deletion when dropping extents
  Btrfs: fix sleeping inside atomic context in qgroup rescan worker
  Btrfs: fix race waiting for qgroup rescan worker
  btrfs: qgroup: exit the rescan worker during umount
  Btrfs: fix extent accounting for partial direct IO writes

Pull Ceph updates from Sage Weil:
 "There are several patches from Ilya fixing RBD allocation lifecycle
  issues, a series adding a nocephx_sign_messages option (and associated
  bug fixes/cleanups), several patches from Zheng improving the
  (directory) fsync behavior, a big improvement in IO for direct-io
  requests when striping is enabled from Caifeng, and several other
  small fixes and cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  libceph: clear msg->con in ceph_msg_release() only
  libceph: add nocephx_sign_messages option
  libceph: stop duplicating client fields in messenger
  libceph: drop authorizer check from cephx msg signing routines
  libceph: msg signing callouts don't need con argument
  libceph: evaluate osd_req_op_data() arguments only once
  ceph: make fsync() wait unsafe requests that created/modified inode
  ceph: add request to i_unsafe_dirops when getting unsafe reply
  libceph: introduce ceph_x_authorizer_cleanup()
  ceph: don't invalidate page cache when inode is no longer used
  rbd: remove duplicate calls to rbd_dev_mapping_clear()
  rbd: set device_type::release instead of device::release
  rbd: don't free rbd_dev outside of the release callback
  rbd: return -ENOMEM instead of pool id if rbd_dev_create() fails
  libceph: use local variable cursor instead of &msg->cursor
  libceph: remove con argument in handle_reply()
  ceph: combine as many iovec as possile into one OSD request
  ceph: fix message length computation
  ceph: fix a comment typo
  rbd: drop null test before destroy functions

Pull more documentation updates from Jon Corbet:
 "A few more documentation patches that wandered in and have no reason
  to wait; these include some improvements to the suggestions for email
  clients and patch submission"

* tag '4.4-additional' of git://git.lwn.net/linux:
  Documentation: Add minimal Mutt config for using Gmail
  Documentation: Add note on sending files directly with Mutt
  Documentation: dontdiff: remove media from dontdiff
  Documentation/SubmittingPatches: discuss In-Reply-To
  Remove email address from Documentation/filesystems/overlayfs.txt
  can-doc: Add missing semicolon to example

Pull drm sti driver updates from Dave Airlie:
 "The sti driver had a requirement on some patches in Greg's tree, they
  are in, so I see no problems just merging this one now"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux:
  drm/sti: load HQVDP firmware the first time HQVDP's plane is used
  drm/sti: fix typo issue in sti_mode_config_init
  drm/sti: set mixer background color through module param
  drm/sti: Remove local fbdev emulation Kconfig option
  drm/sti: remove redundant sign extensions
  drm/sti: hdmi use of_get_i2c_adapter_by_node interface
  drm/sti: hdmi fix i2c adapter device refcounting
  drm/sti: Do not export symbols
  drm/sti: Build monolithic driver
  drm/sti: Use drm_crtc_vblank_*() API
  drm/sti: Store correct CRTC index in events
  drm/sti: Select FW_LOADER
  drm/sti: Constify function pointer structs

After merging the scsi tree, today's linux-next build (powerpc
allyesconfig) failed like this:

In file included from drivers/scsi/mpt3sas/mpt3sas_scsih.c:59:0:
drivers/scsi/mpt3sas/mpt3sas_scsih.c: In function '_scsih_io_done':
drivers/scsi/mpt3sas/mpt3sas_base.h:1414:1: error: inlining failed in call to always_inline 'mpt3sas_scsi_direct_io_get': function body not available
 mpt3sas_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid);
 ^
drivers/scsi/mpt3sas/mpt3sas_scsih.c:4448:6: error: called from here
  if (mpt3sas_scsi_direct_io_get(ioc, smid) &&
      ^
In file included from drivers/scsi/mpt3sas/mpt3sas_scsih.c:59:0:
drivers/scsi/mpt3sas/mpt3sas_base.h:1416:1: error: inlining failed in call to always_inline 'mpt3sas_scsi_direct_io_set': function body not available
 mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io);
 ^
drivers/scsi/mpt3sas/mpt3sas_scsih.c:4454:3: error: called from here
   mpt3sas_scsi_direct_io_set(ioc, smid, 0);
   ^
In file included from drivers/scsi/mpt3sas/mpt3sas_scsih.c:5
9:0:
drivers/scsi/mpt3sas/mpt3sas_base.h:1416:1: error: inlining failed in call to always_inline 'mpt3sas_scsi_direct_io_set': function body not available
 mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io);
 ^
drivers/scsi/mpt3sas/mpt3sas_scsih.c:4454:3: error: called from here
   mpt3sas_scsi_direct_io_set(ioc, smid, 0);
   ^

Presumably caused by commit

  c84b06a4 ("mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: James Bottomley <JBottomley@Odin.com>

Since 4.3 introduced devm_memremap_pages() the pfns handled by DAX may
optionally have a struct page backing.  When a mapped pfn reaches
vmf_insert_pfn_pmd() it fails with a crash signature like the following:

 kernel BUG at mm/huge_memory.c:905!
 [..]
 Call Trace:
  [<ffffffff812a73ba>] __dax_pmd_fault+0x2ea/0x5b0
  [<ffffffffa01a4182>] xfs_filemap_pmd_fault+0x92/0x150 [xfs]
  [<ffffffff811fbe02>] handle_mm_fault+0x312/0x1b50

Fix this by falling back to 4K mappings in the pfn_valid() case.  Longer
term, vmf_insert_pfn_pmd() needs to grow support for architectures that
can provide a 'pmd_special' capability.

Cc: <stable@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Pull drm fixes from Dave Airlie:
 "One urgent fix for an oops under console lock in some drivers, one
  uapi fix, and one revert to fix rockchip regression"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  Revert "drm/rockchip: Convert the probe function to the generic drm_of_component_probe()"
  drm: Don't oops in drm_calc_timestamping_constants() if drm_vblank_init() wasn't called
  drm: Use userspace compatible type in fourcc_mod_code macro

Pull trace cleanups from Steven Rostedt:
 "This contains three more clean up patches.

  One patch is needed to make tracing work without debugfs now that
  tracing uses its own tracefs.

  The second is removing an unused variable.

  The third is fixing a warning about unused variables when MAX_TRACER
  is not configured.  Note, this warning shows up in gcc 6.0, but does
  not show up in gcc 4.9, as it seems that gcc does not complain about
  constants not being used"

* tag 'trace-v4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: #ifdef out uses of max trace when CONFIG_TRACER_MAX_TRACE is not set
  tracing: Remove unused ftrace_cpu_disabled per cpu variable
  tracing: Make tracing work when debugfs is not configured in

Merge branch 'drm-sti-next-2015-11-03' of http://git.linaro.org/people/benjamin.gaignard/kernel into drm-next

sti/drm changes

Add better support for firmware loading
lots of fixes.

* 'drm-sti-next-2015-11-03' of http://git.linaro.org/people/benjamin.gaignard/kernel:
  drm/sti: load HQVDP firmware the first time HQVDP's plane is used
  drm/sti: fix typo issue in sti_mode_config_init
  drm/sti: set mixer background color through module param
  drm/sti: Remove local fbdev emulation Kconfig option
  drm/sti: remove redundant sign extensions
  drm/sti: hdmi use of_get_i2c_adapter_by_node interface
  drm/sti: hdmi fix i2c adapter device refcounting
  drm/sti: Do not export symbols
  drm/sti: Build monolithic driver
  drm/sti: Use drm_crtc_vblank_*() API
  drm/sti: Store correct CRTC index in events
  drm/sti: Select FW_LOADER
  drm/sti: Constify function pointer structs

This reverts commit 52f5eb60.

Rockchip drm can't work with generic drm_of_component_probe now
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Seems the crtc helpers call drm_calc_timestamping_constants()
unconditionally even if the driver didn't initialize vblank support by
calling drm_vblank_init(). That used to be OK since the constants were
stored under drm_crtc.

However I broke this with
commit eba1f35d ("drm: Move timestamping constants into drm_vblank_crtc")
when I moved the constants to live inside the drm_vblank_crtc struct
instead. If drm_vblank_init() isn't called, we don't allocate these
structures, and so drm_calc_timestamping_constants() will oops.

Fix it by adding a check into drm_calc_timestamping_constants() to see
if vblank support was initialized at all. And to keep in line with other
such checks, also toss in a check and warn for the case where vblank
support was initialized, but the wrong number of crtcs was specified.

Fixes the following sort of oops:
 BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0
 IP: [<ffffffffa014b266>] drm_calc_timestamping_constants+0x86/0x130 [drm]
 PGD 0
 Oops: 0002 [#1] SMP
 Modules linked in: sr_mod cdrom mgag200(+) i2c_algo_bit drm_kms_helper ahci syscopyarea sysfillrect sysimgblt libahci fb_sys_fops bnx2x ttm tg3(+) mdio drm ptp sd_mod libata i2c_core pps_core libcrc32c hpsa dm_mirror dm_region_hash dm_log dm_mod
 CPU: 0 PID: 418 Comm: kworker/0:2 Not tainted 4.3.0+ #1
 Hardware name: HP ProLiant DL380 Gen9, BIOS P89 06/09/2015
 Workqueue: events work_for_cpu_fn
 task: ffff88046ca95500 ti: ffff88007830c000 task.ti: ffff88007830c000
 RIP: 0010:[<ffffffffa014b266>]  [<ffffffffa014b266>] drm_calc_timestamping_constants+0x86/0x130 [drm]
 RSP: 0018:ffff88007830f4e8  EFLAGS: 00010246
 RAX: 0000000000fe4c00 RBX: ffff88006a849160 RCX: 0000000000000540
 RDX: 0000000000000000 RSI: 000000000000fde8 RDI: ffff88006a849000
 RBP: ffff88007830f518 R08: ffff88007830c000 R09: 00000001b87e3712
 R10: 00000000000050c4 R11: 0000000000000000 R12: 0000000000fe4c00
 R13: ffff88006a849000 R14: 0000000000000000 R15: 000000000000fde8
 FS:  0000000000000000(0000) GS:ffff88046f800000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00000000000000b0 CR3: 00000000019d6000 CR4: 00000000001406f0
 Stack:
  ffff88007830f518 ffff88006a849000 ffff880c69b90340 ffff880c69b90000
  ffff880c69b90348 ffff880c69b90340 ffff88007830f748 ffffffffa042f7e7
  ffff88006a849090 0000000000000000 ffff88006a849160 0000000000000000
 Call Trace:
  [<ffffffffa042f7e7>] drm_crtc_helper_set_mode+0x3d7/0x4b0 [drm_kms_helper]
  [<ffffffffa04307d4>] drm_crtc_helper_set_config+0x8d4/0xb10 [drm_kms_helper]
  [<ffffffffa01548d4>] drm_mode_set_config_internal+0x64/0x100 [drm]
  [<ffffffffa043c342>] drm_fb_helper_pan_display+0xa2/0x280 [drm_kms_helper]
  [<ffffffff81392c7b>] fb_pan_display+0xbb/0x170
  [<ffffffff8138cf70>] bit_update_start+0x20/0x50
  [<ffffffff8138b81b>] fbcon_switch+0x39b/0x590
  [<ffffffff8140a3d0>] redraw_screen+0x1a0/0x240
  [<ffffffff8140b30e>] do_bind_con_driver+0x2ee/0x310
  [<ffffffff8140b651>] do_take_over_console+0x141/0x1b0
  [<ffffffff81387377>] do_fbcon_takeover+0x57/0xb0
  [<ffffffff8138c98b>] fbcon_event_notify+0x60b/0x750
  [<ffffffff810a5599>] notifier_call_chain+0x49/0x70
  [<ffffffff810a58dd>] __blocking_notifier_call_chain+0x4d/0x70
  [<ffffffff810a5916>] blocking_notifier_call_chain+0x16/0x20
  [<ffffffff8139282b>] fb_notifier_call_chain+0x1b/0x20
  [<ffffffff81394881>] register_framebuffer+0x1f1/0x330
  [<ffffffffa043d9aa>] drm_fb_helper_initial_config+0x27a/0x3d0 [drm_kms_helper]
  [<ffffffffa0469b4d>] mgag200_fbdev_init+0xdd/0xf0 [mgag200]
  [<ffffffffa0468586>] mgag200_modeset_init+0x176/0x1e0 [mgag200]
  [<ffffffffa0464659>] mgag200_driver_load+0x3f9/0x580 [mgag200]
  [<ffffffffa014e067>] drm_dev_register+0xa7/0xb0 [drm]
  [<ffffffffa015054f>] drm_get_pci_dev+0x8f/0x1e0 [drm]
  [<ffffffffa046937b>] mga_pci_probe+0x9b/0xc0 [mgag200]
  [<ffffffff813662d5>] local_pci_probe+0x45/0xa0
  [<ffffffff8109afe4>] work_for_cpu_fn+0x14/0x20
  [<ffffffff8109e13c>] process_one_work+0x14c/0x3c0
  [<ffffffff8109eaa4>] worker_thread+0x244/0x470
  [<ffffffff8168bfba>] ? __schedule+0x2aa/0x760
  [<ffffffff8109e860>] ? rescuer_thread+0x310/0x310
  [<ffffffff810a4438>] kthread+0xd8/0xf0
  [<ffffffff810a4360>] ? kthread_park+0x60/0x60
  [<ffffffff8169030f>] ret_from_fork+0x3f/0x70
  [<ffffffff810a4360>] ? kthread_park+0x60/0x60
 Code: f6 31 d2 41 89 c2 8b 83 b4 00 00 00 0f af c1 48 98 48 69 c0 40 42 0f 00 48 f7 f6 f6 43 74 10 41 89 c4 75 26 f6 05 9a 6f 03 00 01 <45> 89 96 b0 00 00 00 45 89 a6 ac 00 00 00 75 35 48 83 c4 08 5b
 RIP  [<ffffffffa014b266>] drm_calc_timestamping_constants+0x86/0x130 [drm]
  RSP <ffff88007830f4e8>
 CR2: 00000000000000b0

Cc: Jeff Moyer <jmoyer@redhat.com>
Reported-by: Jeff Moyer <jmoyer@redhat.com>
References: http://lists.freedesktop.org/archives/dri-devel/2015-November/094217.html
Fixes: eba1f35d ("drm: Move timestamping constants into drm_vblank_crtc")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Single fix for uapi.

* tag 'topic/drm-fixes-2015-11-11' of git://anongit.freedesktop.org/drm-intel:
  drm: Use userspace compatible type in fourcc_mod_code macro

Pull misc block fixes from Jens Axboe:
 "Stuff that got collected after the merge window opened.  This
  contains:

   - NVMe:
        - Fix for non-striped transfer size setting for NVMe from
          Sathyavathi.
        - (Some) support for the weird Apple nvme controller in the
          macbooks. From Stephan Günther.

   - The error value leak for dax from Al.

   - A few minor blk-mq tweaks from me.

   - Add the new linux-block@vger.kernel.org mailing list to the
     MAINTAINERS file.

   - Discard fix for brd, from Jan.

   - A kerneldoc warning for block core from Randy.

   - An older fix from Vivek, converting a WARN_ON() to a rate limited
     printk when a device is hot removed with dirty inodes"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: don't hardcode blk_qc_t -> tag mask
  dax_io(): don't let non-error value escape via retval instead of EFAULT
  block: fix blk-core.c kernel-doc warning
  fs/block_dev.c: Remove WARN_ON() when inode writeback fails
  NVMe: add support for Apple NVMe controller
  NVMe: use split lo_hi_{read,write}q
  blk-mq: mark __blk_mq_complete_request() static
  MAINTAINERS: add reference to new linux-block list
  NVMe: Increase the max transfer size when mdts is 0
  brd: Refuse improperly aligned discard requests

Pull security subsystem fixes from James Morris:
 "This includes several fixes for TPM, as well as a fix for the x.509
  certificate parser to address CVE-2015-5327"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  X.509: Fix the time validation [ver #2]
  tpm: fix compat 'ppi' link handling in tpm_chip_register()
  tpm: fix missing migratable flag in sealing functionality for TPM2
  TPM: revert the list handling logic fixed in 398a1e71
  TPM: Avoid reference to potentially freed memory
  tpm_tis: restore IRQ vector in IO memory after failed probing
  tpm_tis: free irq after probing

Pull arm64 fixes and clean-ups from Catalin Marinas:
 "Here's a second pull request for this merging window with some
  fixes/clean-ups:

   - __cmpxchg_double*() return type fix to avoid truncation of a long
     to int and subsequent logical "not" in cmpxchg_double()
     misinterpreting the operation success/failure

   - BPF fixes for mod and div by zero

   - Fix compilation with STRICT_MM_TYPECHECKS enabled

   - VDSO build fix without libgcov

   - Some static and __maybe_unused annotations

   - Kconfig clean-up (FRAME_POINTER)

   - defconfig update for CRYPTO_CRC32_ARM64"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: suspend: make hw_breakpoint_restore static
  arm64: mmu: make split_pud and fixup_executable static
  arm64: smp: make of_parse_and_init_cpus static
  arm64: use linux/types.h in kvm.h
  arm64: build vdso without libgcov
  arm64: mark cpus_have_hwcap as __maybe_unused
  arm64: remove redundant FRAME_POINTER kconfig option and force to select it
  arm64: fix R/O permissions of FDT mapping
  arm64: fix STRICT_MM_TYPECHECKS issue in PTE_CONT manipulation
  arm64: bpf: fix mod-by-zero case
  arm64: bpf: fix div-by-zero case
  arm64: Enable CRYPTO_CRC32_ARM64 in defconfig
  arm64: cmpxchg_dbl: fix return value type

Pull h8300 updates from Yoshinori Sato:
 "Some bug fixes"

* tag 'for-4.4' of git://git.osdn.jp/gitroot/uclinux-h8/linux:
  h8300: enable CLKSRC_OF
  h8300: Don't set CROSS_COMPILE unconditionally
  asm-generic: {get,put}_user ptr argument evaluate only 1 time
  h8300: bit io fix
  h8300: zImage fix
  h8300: register address fix
  h8300: Fix alignment for .data
  h8300: unaligned divcr register support.

Pull second batch of kvm updates from Paolo Bonzini:
 "Four changes:

   - x86: work around two nasty cases where a benign exception occurs
     while another is being delivered.  The endless stream of exceptions
     causes an infinite loop in the processor, which not even NMIs or
     SMIs can interrupt; in the virt case, there is no possibility to
     exit to the host either.

   - x86: support for Skylake per-guest TSC rate.  Long supported by
     AMD, the patches mostly move things from there to common
     arch/x86/kvm/ code.

   - generic: remove local_irq_save/restore from the guest entry and
     exit paths when context tracking is enabled.  The patches are a few
     months old, but we discussed them again at kernel summit.  Andy
     will pick up from here and, in 4.5, try to remove it from the user
     entry/exit paths.

   - PPC: Two bug fixes, see merge commit 37028975 for details"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
  KVM: x86: rename update_db_bp_intercept to update_bp_intercept
  KVM: svm: unconditionally intercept #DB
  KVM: x86: work around infinite loop in microcode when #AC is delivered
  context_tracking: avoid irq_save/irq_restore on guest entry and exit
  context_tracking: remove duplicate enabled check
  KVM: VMX: Dump TSC multiplier in dump_vmcs()
  KVM: VMX: Use a scaled host TSC for guest readings of MSR_IA32_TSC
  KVM: VMX: Setup TSC scaling ratio when a vcpu is loaded
  KVM: VMX: Enable and initialize VMX TSC scaling
  KVM: x86: Use the correct vcpu's TSC rate to compute time scale
  KVM: x86: Move TSC scaling logic out of call-back read_l1_tsc()
  KVM: x86: Move TSC scaling logic out of call-back adjust_tsc_offset()
  KVM: x86: Replace call-back compute_tsc_offset() with a common function
  KVM: x86: Replace call-back set_tsc_khz() with a common function
  KVM: x86: Add a common TSC scaling function
  KVM: x86: Add a common TSC scaling ratio field in kvm_vcpu_arch
  KVM: x86: Collect information for setting TSC scaling ratio
  KVM: x86: declare a few variables as __read_mostly
  KVM: x86: merge handle_mmio_page_fault and handle_mmio_page_fault_common
  KVM: PPC: Book3S HV: Don't dynamically split core when already split
  ...

Pull more power management and ACPI updates from Rafael Wysocki:
 "The only new feature in this batch is support for the ACPI _CCA device
  configuration object, which it a pre-requisite for future ACPI PCI
  support on ARM64, but should not affect the other architectures.

  The rest is fixes and cleanups, mostly in cpufreq (including
  intel_pstate), the Operating Performace Points (OPP) framework and
  tools (cpupower and turbostat).

  Specifics:

   - Support for the ACPI _CCA configuration object intended to tell the
     OS whether or not a bus master device supports hardware managed
     cache coherency and a new set of functions to allow drivers to
     check the cache coherency support for devices in a platform
     firmware interface agnostic way (Suravee Suthikulpanit, Jeremy
     Linton).

   - ACPI backlight quirks for ESPRIMO Mobile M9410 and Dell XPS L421X
     (Aaron Lu, Hans de Goede).

   - Fixes for the arm_big_little and s5pv210-cpufreq cpufreq drivers
     (Jon Medhurst, Nicolas Pitre).

   - kfree()-related fixup for the recently introduced CPPC cpufreq
     frontend (Markus Elfring).

   - intel_pstate fix reducing kernel log noise on systems where
     P-states are managed by hardware (Prarit Bhargava).

   - intel_pstate maintainers information update (Srinivas Pandruvada).

   - cpufreq core optimization related to the handling of delayed work
     items used by governors (Viresh Kumar).

   - Locking fixes and cleanups of the Operating Performance Points
     (OPP) framework (Viresh Kumar).

   - Generic power domains framework cleanups (Lina Iyer).

   - cpupower tool updates (Jacob Tanenbaum, Sriram Raghunathan, Thomas
     Renninger).

   - turbostat tool updates (Len Brown)"

* tag 'pm+acpi-4.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
  PCI: ACPI: Add support for PCI device DMA coherency
  PCI: OF: Move of_pci_dma_configure() to pci_dma_configure()
  of/pci: Fix pci_get_host_bridge_device leak
  device property: ACPI: Remove unused DMA APIs
  device property: ACPI: Make use of the new DMA Attribute APIs
  device property: Adding DMA Attribute APIs for Generic Devices
  ACPI: Adding DMA Attribute APIs for ACPI Device
  device property: Introducing enum dev_dma_attr
  ACPI: Honor ACPI _CCA attribute setting
  cpufreq: CPPC: Delete an unnecessary check before the function call kfree()
  PM / OPP: Add opp_rcu_lockdep_assert() to _find_device_opp()
  PM / OPP: Hold dev_opp_list_lock for writers
  PM / OPP: Protect updates to list_dev with mutex
  PM / OPP: Propagate error properly from dev_pm_opp_set_sharing_cpus()
  cpufreq: s5pv210-cpufreq: fix wrong do_div() usage
  MAINTAINERS: update for intel P-state driver
  Creating a common structure initialization pattern for struct option
  cpupower: Enable disabled Cstates if they are below max latency
  cpupower: Remove debug message when using cpupower idle-set -D switch
  cpupower: cpupower monitor reports uninitialized values for offline cpus
  ...

A bunch of changes that I hope will help in understanding it
better for first-time readers.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

This masking prevents access to the end of the device via dax_do_io(),
and is unnecessary as arch_add_memory() would have rejected an unaligned
allocation.

Cc: <stable@vger.kernel.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Rather than punt on the numa node for these e820 ranges try to find a
better answer with memory_add_physaddr_to_nid() when it is available.

Cc: <stable@vger.kernel.org>
Reported-by: Boaz Harrosh <boaz@plexistor.com>
Tested-by: Boaz Harrosh <boaz@plexistor.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Commit ca321d1c "ACPICA: Update NFIT table to rename a flags field"
performed a tree-wide s/ACPI_NFIT_MEM_ARMED/ACPI_NFIT_MEM_NOT_ARMED/
operation, but missed the tools/testing/nvdimm/ directory.

Cc: Bob Moore <robert.moore@intel.com>
Cc: Lv Zheng <lv.zheng@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

hw_breakpoint_restore is only used within suspend.c, so it can be
declared static.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

split_pud and fixup_executable are only called from within mmu.c, so
they can be declared static.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

of_parse_and_init_cpus is only called from within smp.c, so it can be
declared static.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>