- 02 Jul, 2024 13 commits
-
-
Sebastian Andrzej Siewior authored
Every NIC driver utilizing XDP should invoke xdp_do_flush() after processing all packages. With the introduction of the bpf_net_context logic the flush lists (for dev, CPU-map and xsk) are lazy initialized only if used. However xdp_do_flush() tries to flush all three of them so all three lists are always initialized and the likely empty lists are "iterated". Without the usage of XDP but with CONFIG_DEBUG_NET the lists are also initialized due to xdp_do_check_flushed(). Jakub suggest to utilize the hints in bpf_net_context and avoid invoking the flush function. This will also avoiding initializing the lists which are otherwise unused. Introduce bpf_net_ctx_get_all_used_flush_lists() to return the individual list if not-empty. Use the logic in xdp_do_flush() and xdp_do_check_flushed(). Remove the not needed .*_check_flush(). Suggested-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
Paolo Abeni <pabeni@redhat.com>
-
Sebastian Andrzej Siewior authored
There is no clone() invocation within a bpf_net_ctx_…() block. Therefore the task_struct::bpf_net_context has always to be NULL and an explicit initialisation is not required. Remove the NULL assignment in the clone() path. Suggested-by:
-
Paolo Abeni authored
David Wei says: ==================== page_pool: bnxt_en: unlink old page pool in queue api using helper 56ef27e3 unexported page_pool_unlink_napi() and renamed it to page_pool_disable_direct_recycling(). This is because there was no in-tree user of page_pool_unlink_napi(). Since then Rx queue API and an implementation in bnxt got merged. In the bnxt implementation, it broadly follows the following steps: allocate new queue memory + page pool, stop old rx queue, swap, then destroy old queue memory + page pool. The existing NAPI instance is re-used so when the old page pool that is no longer used but still linked to this shared NAPI instance is destroyed, it will trigger warnings. In my initial patches I unlinked a page pool from a NAPI instance directly. Instead, export page_pool_disable_direct_recycling() and call that instead to avoid having a driver touch a core struct. ==================== Link: https://patch.msgid.link/20240627030200.3647145-1-dw@davidwei.ukSigned-off-by:
-
David Wei authored
Have bnxt call page_pool_disable_direct_recycling() to unlink the old page pool when resetting a queue prior to destroying it, instead of touching a netdev core struct directly. Signed-off-by:
David Wei <dw@davidwei.uk> Reviewed-by:
-
David Wei authored
56ef27e3 unexported page_pool_unlink_napi() and renamed it to page_pool_disable_direct_recycling(). This is because there was no in-tree user of page_pool_unlink_napi(). Since then Rx queue API and an implementation in bnxt got merged. In the bnxt implementation, it broadly follows the following steps: allocate new queue memory + page pool, stop old rx queue, swap, then destroy old queue memory + page pool. The existing NAPI instance is re-used so when the old page pool that is no longer used but still linked to this shared NAPI instance is destroyed, it will trigger warnings. In my initial patches I unlinked a page pool from a NAPI instance directly. Instead, export page_pool_disable_direct_recycling() and call that instead to avoid having a driver touch a core struct. Suggested-by:
-
Paolo Abeni authored
Pavel Begunkov says: ==================== zerocopy tx cleanups Assorted zerocopy send path cleanups, the main part of which is moving some net stack specific accounting out of io_uring back to net/ in Patch 4. ==================== Link: https://patch.msgid.link/cover.1719190216.git.asml.silence@gmail.comSigned-off-by:
-
Pavel Begunkov authored
skb_zerocopy_iter_stream() only uses @orig_uarg in the !link_skb path, and we can move the local variable in the appropriate block. Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Pavel Begunkov authored
Currently, io_uring's io_sg_from_iter() duplicates the part of __zerocopy_sg_from_iter() charging pages to the socket. It'd be too easy to miss while changing it in net/, the chunk is not the most straightforward for outside users and full of internal implementation details. io_uring is not a good place to keep it, deduplicate it by moving out of the callback into __zerocopy_sg_from_iter(). Signed-off-by:
-
Pavel Begunkov authored
Instead of accounting every page range against the socket separately, do it in batch based on the change in skb->truesize. It's also moved into __zerocopy_sg_from_iter(), so that zerocopy_fill_skb_from_iter() is simpler and responsible for setting frags but not the accounting. Signed-off-by:
-
Pavel Begunkov authored
Split a function out of __zerocopy_sg_from_iter() that only cares about the traditional path with refcounted pages and doesn't need to know about ->sg_from_iter. A preparation patch, we'll improve on the function later. Signed-off-by:
-
Pavel Begunkov authored
skb_zcopy_set() does nothing if there is already a ubuf_info associated with an skb, and since ->link_skb should have set it several lines above the check here essentially does nothing and can be removed. It's also safer this way, because even if the callback is faulty we'll have it set. Signed-off-by:
-
Russell King (Oracle) authored
phy_suspend() checks the WoL status, and then dereferences phydrv->flags if (and only if) we decided that WoL has been enabled on either the PHY or the netdev. We then check whether phydrv was NULL, but we've potentially already dereferenced the pointer. If phydrv is NULL, then phy_ethtool_get_wol() will return an error and leave wol.wolopts set to zero. However, if netdev->wol_enabled is true, then we would dereference a NULL pointer. Checking the PHY drivers, the only place that phydev->wol_enabled is checked by them is in their suspend/resume callbacks and nowhere else (which is correct, because phylib only updates this in phy_suspend()). So, move the NULL pointer check earlier to avoid a NULL pointer dereference. Leave the check for phydrv->suspend in place as a driver may populate the .resume method but not the .suspend method. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/E1sN8tn-00GDCZ-Jj@rmk-PC.armlinux.org.ukSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'linux-can-next-for-6.11-20240629' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2024-06-29 Geert Uytterhoeven contributes 3 patches with small improvements and cleanups for the rcar_canfd driver. A patch by Christophe JAILLET constifies the struct m_can_ops in the m_can driver to reduce the code size. The last 9 patches are by me an work around erratum DS80000789E 6 of mcp2518fd. * tag 'linux-can-next-for-6.11-20240629' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: mcp251xfd: tef: update workaround for erratum DS80000789E 6 of mcp2518fd can: mcp251xfd: tef: prepare to workaround broken TEF FIFO tail index erratum can: mcp251xfd: rx: add workaround for erratum DS80000789E 6 of mcp2518fd can: mcp251xfd: rx: prepare to workaround broken RX FIFO head index erratum can: mcp251xfd: mcp251xfd_handle_rxif_ring_uinc(): factor out in separate function can: mcp251xfd: clarify the meaning of timestamp can: mcp251xfd: move mcp251xfd_timestamp_start()/stop() into mcp251xfd_chip_start/stop() can: mcp251xfd: update errata references can: mcp251xfd: properly indent labels can: gs_usb: add VID/PID for Xylanta SAINT3 product family can: m_can: Constify struct m_can_ops can: rcar_canfd: Remove superfluous parentheses in address calculations can: rcar_canfd: Improve printing of global operational state can: rcar_canfd: Simplify clock handling ==================== Link: https://patch.msgid.link/20240629114017.1080160-1-mkl@pengutronix.deSigned-off-by:
-
- 01 Jul, 2024 20 commits
-
-
Heng Qi authored
syzbot reported a general protection fault caused by a null pointer dereference in coalesce_fill_reply(). The issue occurs when req_base->dev is null, leading to an invalid memory access. This panic occurs if dumping coalesce when no device name is specified. Fixes: f750dfe8 ("ethtool: provide customized dim profile management") Reported-by: syzbot+e77327e34cdc8c36b7d3@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=e77327e34cdc8c36b7d3Signed-off-by:
Heng Qi <hengqi@linux.alibaba.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony nguyen says: ==================== Intel Wired LAN Driver Updates 2024-06-28 (MAINTAINERS, ice) This series contains updates to MAINTAINERS file and ice driver. Jesse replaces himself with Przemek in the maintainers file. Karthik Sundaravel adds support for VF get/set MAC address via devlink. Eric checks for errors from ice_vsi_rebuild() during queue reconfiguration. Paul adjusts FW API version check for E830 devices. Piotr adds differentiation of unload type when shutting down AdminQ. Przemek changes ice_adapter initialization to occur once per physical card. ==================== Signed-off-by: -
David S. Miller authored
Michael Chan says: ==================== bnxt_en: PTP updates for net-next The first 5 patches implement the PTP feature on the new BCM5760X chips. The main new hardware feature is the new TX timestamp completion which enables the driver to retrieve the TX timestamp in NAPI without deferring to the PTP worker. The last 5 patches increase the number of TX PTP packets in-flight from 1 to 4 on the older BCM5750X chips. On these older chips, we need to call firmware in the PTP worker to retrieve the timestamp. We use an arry to keep track of the in-flight TX PTP packets. v2: Patch #2: Fix the unwind of txr->is_ts_pkt when bnxt_start_xmit() aborts. Patch #4: Set the SKBTX_IN_PROGRESS flag for timestamp packets. ==================== Signed-off-by: -
Pavan Chebbi authored
Now that we require the spinlock to protect ptp->txts_prod, change ptp->tx_avail to non-atomic and protect it under the same spinlock. Add a new helper function bnxt_ptp_get_txts_prod() to decrement ptp->tx_avail under spinlock and return the producer. Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Pavan Chebbi authored
Start accepting up to 4 TX TS requests on BCM5750X (P5) chips. These PTP TX packets will be queued in the ptp->txts_req[] array waiting for the TX timestamp to complete. The entries in the array will be managed by a producer and consumer index. The producer index is updated under spinlock since multiple TX rings can try to send PTP packets at the same time. Signed-off-by:
-
Pavan Chebbi authored
Change the function bnxt_stamp_tx_skb() to return 0 for suceess or -EAGAIN if the timestamp is still pending in firmware. The calling PTP aux worker will reschedule based on the return code. Signed-off-by:
-
Pavan Chebbi authored
In the current 5750X PTP code paths, there is always at most one TX SKB requested for timestamp and we won't accept another one until we have retrieved the timestamp or it has timed out. Remove the unnecessary check in bnxt_get_tx_ts_p5() for a pending SKB and change the function to void. Signed-off-by:
-
Pavan Chebbi authored
On the older 5750X (P5) chips, we currently support only 1 TX PTP packet in-flight waiting for the timestamp. Refactor the datastructures to prepare to support up to 4 TX PTP packets. Combine all fields required for PTP TX timestamp query into one structure. An array of this structure will be added in follow-on patches to support multiple outstanding TX timestamps. Signed-off-by:
-
Pavan Chebbi authored
BCM5760X firmware will advertise direct 64-bit PHC registers access for the driver from BAR0. Make the necessary changes in handling HWRM_PORT_MAC_PTP_QCFG's response and PHC register mapping for 5760X chips. Signed-off-by:
-
Michael Chan authored
The new BCM5760X chips will return the timestamp of TX packets in a new completion. Add logic in __bnxt_poll_work() to handle this completion type to retrieve the timestamp. This feature eliminates the limit on the number of in-flight PTP TX packets. Reviewed-by:
-
Michael Chan authored
The driver's current logic will always free all the TX SKBs up to txr->tx_hw_cons within NAPI. In the next patches, we'll be adding logic to handle TX timestamp completion and we may need to hold some remaining TX SKBs if we don't have the timestamp completions yet. Modify __bnxt_poll_work_done() to clear each event bit separately to allow bnapi->tx_int() to decide whether to clear BNXT_TX_CMP_EVENT or not. bnapi->tx_int() will not clear BNXT_TX_CMP_EVENT if some TX SKBs are held waiting for TX timestamps. Note that legacy chips will never hold any SKBs this way. The SKB is always deferred to the PTP worker slow path to retrieve the timestamp from firmware. On the new P7 chips, the timestamp is returned by the hardware directly and we can retrieve it directly from NAPI. Reviewed-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by:
-
Michael Chan authored
Remove the unused is_gso field and add the is_ts_pkt field to struct bnxt_sw_tx_bd. This field will mark the TX BD that has requested HW TX timestamp. The field needs to be cleared if the timestamp packet is later aborted. This field will be useful when processing the new TX timestamp completion from the hardware in the next patches. Reviewed-by:
-
Michael Chan authored
The new BCM5760X chips will generate this new TX timestamp completion when a TX packet's timestamp has been taken right before transmission. The driver logic to retrieve the timestamp will be added in the next few patches. Reviewed-by:
-
Nithin Dabilpuram authored
Octeontx2 hardware uses Near Data Cache(NDC) block to cache contexts in it so that access to LLC/DRAM can be avoided. It is recommended in HRM to sync the NDC contents before releasing/resetting LF resources. Hence implement NDC_SYNC mailbox and sync contexts during driver teardown. Signed-off-by:
Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
-
FUJITA Tomonori authored
Call phylink_ethtool_ksettings_get() for get_link_ksettings method and ethtool_op_get_link() for get_link method. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by:
-
David S. Miller authored
Merge tag 'nf-next-24-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next into main Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for net-next: Patch #1 to #11 to shrink memory consumption for transaction objects: struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */ struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */ struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */ struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */ struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */ struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */ struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */ struct nft_trans_elem can now be allocated from kmalloc-96 instead of kmalloc-128 slab. Series from Florian Westphal. For the record, I have mangled patch #1 to add nft_trans_container_*() and use if for every transaction object. I have also added BUILD_BUG_ON to ensure struct nft_trans always comes at the beginning of the container transaction object. And few minor cleanups, any new bugs are of my own. Patch #12 simplify check for SCTP GSO in IPVS, from Ismael Luceno. Patch #13 nf_conncount key length remains in the u32 bound, from Yunjian Wang. Patch #14 removes unnecessary check for CTA_TIMEOUT_L3PROTO when setting default conntrack timeouts via nfnetlink_cttimeout API, from Lin Ma. Patch #15 updates NFT_SECMARK_CTX_MAXLEN to 4096, SELinux could use larger secctx names than the existing 256 bytes length. Patch #16 adds a selftest to exercise nfnetlink_queue listeners leaving nfnetlink_queue, from Florian Westphal. Patch #17 increases hitcount from 255 to 65535 in xt_recent, from Phil Sutter. ==================== Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== tcp_metrics: add netlink protocol spec in YAML Add a netlink protocol spec for the tcp_metrics generic netlink family. First patch adjusts the uAPI header guards to make it easier to build tools/ with non-system headers. v1: https://lore.kernel.org/all/20240626201133.2572487-1-kuba@kernel.org ==================== Signed-off-by:
-
Jakub Kicinski authored
Add a protocol spec for tcp_metrics, so that it's accessible via YNL. Useful at the very least for testing fixes. In this episode of "10,000 ways to complicate netlink" the metric nest has defines which are off by 1. iproute2 does: struct rtattr *m[TCP_METRIC_MAX + 1 + 1]; parse_rtattr_nested(m, TCP_METRIC_MAX + 1, a); for (i = 0; i < TCP_METRIC_MAX + 1; i++) { // ... attr = m[i + 1]; This is too weird to support in YNL, add a new set of defines with _correct_ values to the official kernel header. Signed-off-by:Donald Hunter <donald.hunter@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
tcp_metrics' header lacks the customary _UAPI in the header guard. This makes YNL build rules work less seamlessly. We can easily fix that on YNL side, but this could also be problematic if we ever needed to create a kernel-only tcp_metrics.h. Signed-off-by:
-
Marek Vasut authored
Realtek RTL8211F Ethernet PHY supports 3 LED pins which are used to indicate link status and activity. Add minimal LED controller driver supporting the most common uses with the 'netdev' trigger. Signed-off-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
- 29 Jun, 2024 7 commits
-
-
Jakub Kicinski authored
Edward Cree says: ==================== ethtool: track custom RSS contexts in the core Make the core responsible for tracking the set of custom RSS contexts, their IDs, indirection tables, hash keys, and hash functions; this lets us get rid of duplicative code in drivers, and will allow us to support netlink dumps later. This series only moves the sfc EF10 & EF100 driver over to the new API; other drivers (mvpp2, octeontx2, mlx5, sfc/siena, bnxt_en) can be converted afterwards and the legacy API removed. ==================== Link: https://patch.msgid.link/cover.1719502239.git.ecree.xilinx@gmail.comSigned-off-by:
-
Edward Cree authored
The core now always satisfies 'ethtool -x context nonzero' from its own tracking, so our lookup code for that case is never called. Remove it. Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://patch.msgid.link/b426fcc416dedc8f203e52eebef6891eccebe4c1.1719502240.git.ecree.xilinx@gmail.comSigned-off-by:
-
Edward Cree authored
On 'ethtool -x' with rss_context != 0, instead of calling the driver to read the RSS settings for the context, just get the settings from the rss_ctx xarray, and return them to the user with no driver involvement. Signed-off-by:
-
Edward Cree authored
The core is now responsible for allocating IDs and a memory region for us to store our state (struct efx_rss_context_priv), so we no longer need efx_alloc_rss_context_entry() and friends. Since the contexts are now maintained by the core, use the core's lock (net_dev->ethtool->rss_lock), rather than our own mutex (efx->rss_lock), to serialise access against changes; and remove the now-unused efx->rss_lock from struct efx_nic. Signed-off-by:
-
Edward Cree authored
While this is not needed to serialise the ethtool entry points (which are all under RTNL), drivers may have cause to asynchronously access dev->ethtool->rss_ctx; taking dev->ethtool->rss_lock allows them to do this safely without needing to take the RTNL. Signed-off-by:
-
Edward Cree authored
Currently passed as NULL, but will allow drivers to report back errors when ethnl support for these ops is added. Signed-off-by:
-
Edward Cree authored
Add a new API to create/modify/remove RSS contexts, that passes in the newly-chosen context ID (not as a pointer) rather than leaving the driver to choose it on create. Also pass in the ctx, allowing drivers to easily use its private data area to store their hardware-specific state. Keep the existing .set_rxfh API for now as a fallback, but deprecate it for custom contexts (rss_context != 0). Signed-off-by:
-
