- 03 Feb, 2012 2 commits
-
-
Takashi Iwai authored
commit b4ead019 upstream. The recent change of the power-widget handling for IDT codecs caused the silent output from the docking-station line-out jack. This was partially fixed by the commit f2cbba76 "ALSA: hda - Fix the lost power-setup of seconary pins after PM resume". But the line-out on the docking-station is still silent when booted with the jack plugged even by this fix. The remainig bug is that the power-widget is set off in stac92xx_init() because the pins in cfg->line_out_pins[] aren't checked there properly but only hp_pins[] are checked in is_nid_hp_pin(). This patch fixes the problem by checking both HP and line-out pins and leaving the power-map correctly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42637Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 52409aa6 upstream. The commit 2ae66c26 ALSA: hda: option to enable arbitrary buffer/period sizes introduced a regression on machines with Intel controller and Nvidia HDMI. The reason is that the driver modifies the global variable align_buffer_size when an Intel controller is found, and the Nvidia HDMI controller is probed after Intel although Nvidia chips require the aligned buffers. This patch fixes the problem by moving the flag into the local struct so that it's not affected by other controllers. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42567Signed-off-by:
-
- 26 Jan, 2012 38 commits
-
-
Greg Kroah-Hartman authored
-
Hugh Dickins authored
commit 24513264 upstream. Commit cc39c6a9 ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by:
Hugh Dickins <hughd@google.com> Reviewed-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Hugh Dickins authored
commit 85046579 upstream. scan_mapping_unevictable_pages() is used to make SysV SHM_LOCKed pages evictable again once the shared memory is unlocked. It does this with pagevec_lookup()s across the whole object (which might occupy most of memory), and takes 300ms to unlock 7GB here. A cond_resched() every PAGEVEC_SIZE pages would be good. However, KOSAKI-san points out that this is called under shmem.c's info->lock, and it's also under shm.c's shm_lock(), both spinlocks. There is no strong reason for that: we need to take these pages off the unevictable list soonish, but those locks are not required for it. So move the call to scan_mapping_unevictable_pages() from shmem.c's unlock handling up to shm.c's unlock handling. Remove the recently added barrier, not needed now we have spin_unlock() before the scan. Use get_file(), with subsequent fput(), to make sure we have a reference to mapping throughout scan_mapping_unevictable_pages(): that's something that was previously guaranteed by the shm_lock(). Remove shmctl's lru_add_drain_all(): we don't fault in pages at SHM_LOCK time, and we lazily discover them to be Unevictable later, so it serves no purpose for SHM_LOCK; and serves no purpose for SHM_UNLOCK, since pages still on pagevec are not marked Unevictable. The original code avoided redundant rescans by checking VM_LOCKED flag at its level: now avoid them by checking shp's SHM_LOCKED. The original code called scan_mapping_unevictable_pages() on a locked area at shm_destroy() time: perhaps we once had accounting cross-checks which required that, but not now, so skip the overhead and just let inode eviction deal with them. Put check_move_unevictable_page() and scan_mapping_unevictable_pages() under CONFIG_SHMEM (with stub for the TINY case when ramfs is used), more as comment than to save space; comment them used for SHM_UNLOCK. Signed-off-by:
-
Stanislaw Gruszka authored
commit 68acc4af upstream. Patch fix firmware error on "iw dev wlan0 scan passive" for hardware scanning (with disable_hw_scan=0 module parameter). iwl3945 0000:03:00.0: Microcode SW error detected. Restarting 0x82000008. iwl3945 0000:03:00.0: Loaded firmware version: 15.32.2.9 iwl3945 0000:03:00.0: Start IWL Error Log Dump: iwl3945 0000:03:00.0: Status: 0x0002A2E4, count: 1 iwl3945 0000:03:00.0: Desc Time asrtPC blink2 ilink1 nmiPC Line iwl3945 0000:03:00.0: SYSASSERT (0x5) 0041263900 0x13756 0x0031C 0x00000 764 iwl3945 0000:03:00.0: Error Reply type 0x000002FC cmd C_SCAN (0x80) seq 0x443E ser 0x00340000 iwl3945 0000:03:00.0: Command C_SCAN failed: FW Error iwl3945 0000:03:00.0: Can't stop Rx DMA. We have disable ability to change passive scanning to active on particular channel when traffic is detected on that channel. Otherwise firmware will report error, when we try to do passive scan on radar channels. Reported-and-debugged-by:
Pedro Francisco <pedrogfrancisco@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Wey-Yi Guy authored
commit b2ccccdc upstream. Check and report WARN only when its invalid Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=42621 https://bugzilla.redhat.com/show_bug.cgi?id=766071Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Michal Hocko authored
commit 687875fb upstream. Fix the following NULL ptr dereference caused by cat /sys/devices/system/memory/memory0/removable Pid: 13979, comm: sed Not tainted 3.0.13-0.5-default #1 IBM BladeCenter LS21 -[7971PAM]-/Server Blade RIP: __count_immobile_pages+0x4/0x100 Process sed (pid: 13979, threadinfo ffff880221c36000, task ffff88022e788480) Call Trace: is_pageblock_removable_nolock+0x34/0x40 is_mem_section_removable+0x74/0xf0 show_mem_removable+0x41/0x70 sysfs_read_file+0xfe/0x1c0 vfs_read+0xc7/0x130 sys_read+0x53/0xa0 system_call_fastpath+0x16/0x1b We are crashing because we are trying to dereference NULL zone which came from pfn=0 (struct page ffffea0000000000). According to the boot log this page is marked reserved: e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) and early_node_map confirms that: early_node_map[3] active PFN ranges 1: 0x00000010 -> 0x0000009c 1: 0x00000100 -> 0x000bffa3 1: 0x00100000 -> 0x00240000 The problem is that memory_present works in PAGE_SECTION_MASK aligned blocks so the reserved range sneaks into the the section as well. This also means that free_area_init_node will not take care of those reserved pages and they stay uninitialized. When we try to read the removable status we walk through all available sections and hope that the zone is valid for all pages in the section. But this is not true in this case as the zone and nid are not initialized. We have only one node in this particular case and it is marked as node=1 (rather than 0) and that made the problem visible because page_to_nid will return 0 and there are no zones on the node. Let's check that the zone is valid and that the given pfn falls into its boundaries and mark the section not removable. This might cause some false positives, probably, but we do not have any sane way to find out whether the page is reserved by the platform or it is just not used for whatever other reasons. Signed-off-by:
Michal Hocko <mhocko@suse.cz> Acked-by:
Mel Gorman <mgorman@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Will Deacon authored
commit 85e72aa5 upstream. /proc/pid/clear_refs is used to clear the Referenced and YOUNG bits for pages and corresponding page table entries of the task with PID pid, which includes any special mappings inserted into the page tables in order to provide things like vDSOs and user helper functions. On ARM this causes a problem because the vectors page is mapped as a global mapping and since ec706dab ("ARM: add a vma entry for the user accessible vector page"), a VMA is also inserted into each task for this page to aid unwinding through signals and syscall restarts. Since the vectors page is required for handling faults, clearing the YOUNG bit (and subsequently writing a faulting pte) means that we lose the vectors page *globally* and cannot fault it back in. This results in a system deadlock on the next exception. To see this problem in action, just run: $ echo 1 > /proc/self/clear_refs on an ARM platform (as any user) and watch your system hang. I think this has been the case since 2.6.37 This patch avoids clearing the aforementioned bits for reserved pages, therefore leaving the vectors page intact on ARM. Since reserved pages are not candidates for swap, this change should not have any impact on the usefulness of clear_refs. Signed-off-by:
Will Deacon <will.deacon@arm.com> Reported-by:
Moussa Ba <moussaba@micron.com> Acked-by:
Nicolas Pitre <nico@linaro.org> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by:
-
Ananth N Mavinakayanahalli authored
commit d496aab5 upstream. Commit ef53d9c5 ("kprobes: improve kretprobe scalability with hashed locking") introduced a bug where we can potentially leak kretprobe_instances since we initialize a hlist head after having used it. Initialize the hlist head before using it. Reported by: Jim Keniston <jkenisto@us.ibm.com> Acked-by:
Jim Keniston <jkenisto@us.ibm.com> Signed-off-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Srinivasa D S <srinivasa@in.ibm.com> Signed-off-by:
-
Jeff Layton authored
commit ce91acb3 upstream. We've had some reports of servers (namely, the Solaris in-kernel CIFS server) that don't deal properly with writes that are "too large" even though they set CAP_LARGE_WRITE_ANDX. Change the default to better mirror what windows clients do. Cc: Pavel Shilovsky <piastry@etersoft.ru> Reported-by:
Nick Davis <phireph0x@yahoo.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Dan Rosenberg authored
commit c25a785d upstream. If the provided system call number is equal to __NR_syscalls, the current check will pass and a function pointer just after the system call table may be called, since sys_call_table is an array with total size __NR_syscalls. Whether or not this is a security bug depends on what the compiler puts immediately after the system call table. It's likely that this won't do anything bad because there is an additional NULL check on the syscall entry, but if there happens to be a non-NULL value immediately after the system call table, this may result in local privilege escalation. Signed-off-by:
Dan Rosenberg <drosenberg@vsecurity.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Eugene Teo <eugeneteo@kernel.sg> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Toshiharu Okada authored
commit ff35e8b1 upstream. This patch modified the setting value of I2C Bus Transfer Rate Setting Counter regisrer. Signed-off-by:
Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Dave Chinner authored
commit b1c770c2 upstream When finding the longest extent in an AG, we read the value directly out of the AGF buffer without endian conversion. This will give an incorrect length, resulting in FITRIM operations potentially not trimming everything that it should. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Ben Myers <bpm@sgi.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit dfd00c4c upstream. Same devices can generate interrupt without properly setting bit in INT_SOURCE_CSR register (spurious interrupt), what will cause IRQ line will be disabled by interrupts controller driver. We discovered that clearing INT_MASK_CSR stops such behaviour. We previously first read that register, and then clear all know interrupt sources bits and do not touch reserved bits. After this patch, we write to all register content (I believe writing to reserved bits on that register will not cause any problems, I tested that on my rt2800pci device). This fix very bad performance problem, practically making device unusable (since worked without interrupts), reported in: https://bugzilla.redhat.com/show_bug.cgi?id=658451 We previously tried to workaround that issue in commit 4ba7d999 "rt2800pci: handle spurious interrupts", but it was reverted in commit 82e5fc2a as thing, that will prevent to detect real spurious interrupts. Reported-and-tested-by:
Amir Hedayaty <hedayaty@gmail.com> Signed-off-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
-
Felix Fietkau authored
commit 7a532fe7 upstream. Documentation states that the KeyMiss flag is only valid if RxFrameOK is unset, however empirical evidence has shown that this is false. When KeyMiss is set (and RxFrameOK is 1), the hardware passes a valid frame which has not been decrypted. The driver then falsely marks the frame as decrypted, and when using CCMP this corrupts the rx CCMP PN, leading to connection hangs. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Cliff Wickman authored
commit c5d35d39 upstream. This patch implements a workaround for a UV2 hardware bug. The bug is a non-atomic update of a memory-mapped register. When hardware message delivery and software message acknowledge occur simultaneously the pending message acknowledge for the arriving message may be lost. This causes the sender's message status to stay busy. Part of the workaround is to not acknowledge a completed message until it is verified that no other message is actually using the resource that is mistakenly recorded in the completed message. Part of the workaround is to test for long elapsed time in such a busy condition, then handle it by using a spare sending descriptor. The stay-busy condition is eventually timed out by hardware, and then the original sending descriptor can be re-used. Most of that logic change is in keeping track of the current descriptor and the state of the spares. The occurrences of the workaround are added to the BAU statistics. Signed-off-by:
Cliff Wickman <cpw@sgi.com> Link: http://lkml.kernel.org/r/20120116211947.GC5767@sgi.comSigned-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Cliff Wickman authored
commit d059f9fa upstream. Move the call to enable_timeouts() forward so that BAU_MISC_CONTROL is initialized before using it in calculate_destination_timeout(). Fix the calculation of a BAU destination timeout for UV2 (in calculate_destination_timeout()). Signed-off-by:
-
Cliff Wickman authored
commit da87c937 upstream. Update the use of the Broadcast Assist Unit on SGI Altix UV2 to the use of native UV2 mode on new hardware (not the legacy mode). UV2 native mode has a different format for a broadcast message. We also need quick differentiaton between UV1 and UV2. Signed-off-by:
-
Alexander Aring authored
commit 2727b175 upstream. Correct OMAP_I2C_SYSC_REG offset in omap4 register map. Offset 0x20 is reserved and OMAP_I2C_SYSC_REG has 0x10 as offset. Signed-off-by:
Alexander Aring <a.aring@phytec.de> [khilman@ti.com: minor changelog edits] Signed-off-by:
Kevin Hilman <khilman@ti.com> Signed-off-by:
-
Steven Rostedt authored
commit c10076c4 upstream. Tracepoints are disabled for tainted modules, which is usually because the module is either proprietary or was forced, and we don't want either of them using kernel tracepoints. But, a module can also be tainted by being in the staging directory or compiled out of tree. Either is fine for use with tracepoints, no need to punish them. I found this out when I noticed that my sample trace event module, when done out of tree, stopped working. Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Dave Jones <davej@redhat.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Miroslav Slugen authored
commit cd4ca7af upstream. Update xc4000 tuner definition, number 81 is already in use by TUNER_PARTSNIC_PTI_5NF05. Signed-off-by:
Miroslav Slugen <thunder.mmm@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
Miroslav Slugen authored
commit b6854e3f upstream. All radio tuners in cx88 driver using same address for radio and tuner, so there is no need to probe it twice for same tuner and we can use radio_type UNSET, this also fix broken radio since kernel 2.6.39-rc1 for those tuners. Signed-off-by:
-
Miroslav Slugen authored
commit a7c8aada upstream. Fix possible null dereference for Leadtek DTV 3200H XC4000 tuner when no firmware file available. Signed-off-by:
-
Rafał Miłecki authored
commit 28e7d218 upstream. This clears the currently mapped core when suspending, to force re-mapping after resume. Without that we were touching default core registers believing some other core is mapped. Such a behaviour resulted in lockups on some machines. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Roland Dreier authored
commit 895f3022 upstream. The target code was not setting the additional sense length field in the sense data it returned, which meant that at least the Linux stack ignored the ASC/ASCQ fields. For example, without this patch, on a tcm_loop device: # sg_raw -v /dev/sda 2 0 0 0 0 0 gives cdb to send: 02 00 00 00 00 00 SCSI Status: Check Condition Sense Information: Fixed format, current; Sense key: Illegal Request Raw sense data (in hex): 70 00 05 00 00 00 00 00 while after the patch we correctly get the following (which matches what a regular disk returns): cdb to send: 02 00 00 00 00 00 SCSI Status: Check Condition Sense Information: Fixed format, current; Sense key: Illegal Request Additional sense: Invalid command operation code Raw sense data (in hex): 70 00 05 00 00 00 00 0a 00 00 00 00 20 00 00 00 00 00 Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Roland Dreier authored
commit ce136176 upstream. Current SCSI specs say that the "response format" field in the standard INQUIRY response should be set to 2, and all the real SCSI devices I have do put 2 here. So let's do that too. Signed-off-by:
-
Stratos Psomadakis authored
commit cced5041 upstream. sym53c8xx_slave_destroy unconditionally assumes that sym53c8xx_slave_alloc has succesesfully allocated a sym_lcb. This can lead to a NULL pointer dereference (exposed by commit 4e6c82b3). Signed-off-by:
Stratos Psomadakis <psomas@gentoo.org> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Lin Ming authored
commit d640113f upstream. For UP processor, it is likely that no _MAT method or MADT table defined. So currently acpi_get_cpuid(...) always return -1 for UP processor. This is wrong. It should return valid value for CPU0. In the other hand, BIOS may define multiple CPU handles even for UP processor, for example Scope (_PR) { Processor (CPU0, 0x00, 0x00000410, 0x06) {} Processor (CPU1, 0x01, 0x00000410, 0x06) {} Processor (CPU2, 0x02, 0x00000410, 0x06) {} Processor (CPU3, 0x03, 0x00000410, 0x06) {} } We should only return valid value for CPU0's acpi handle. And return invalid value for others. http://marc.info/?t=132329819900003&r=1&w=2 Reported-and-tested-by: wallak@free.fr Signed-off-by:
Lin Ming <ming.m.lin@intel.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Lin Ming authored
commit da4d8b28 upstream. The call to acpi_os_validate_address in acpi_ds_get_region_arguments was removed by mistake in commit 9ad19ac(ACPICA: Split large dsopcode and dsload.c files). Put it back. Reported-and-bisected-by:
Luca Tettamanti <kronos.it@gmail.com> Signed-off-by:
-
Kurt Garloff authored
commit 9f10f6a5 upstream. In SRAT v1, we had 8bit proximity domain (PXM) fields; SRAT v2 provides 32bits for these. The new fields were reserved before. According to the ACPI spec, the OS must disregrard reserved fields. ia64 did handle the PXM fields almost consistently, but depending on sgi's sn2 platform. This patch leaves the sn2 logic in, but does also use 16/32 bits for PXM if the SRAT has rev 2 or higher. The patch also adds __init to the two pxm accessor functions, as they access __initdata now and are called from an __init function only anyway. Note that the code only uses 16 bits for the PXM field in the processor proximity field; the patch does not address this as 16 bits are more than enough. Signed-off-by:
Kurt Garloff <kurt@garloff.de> Signed-off-by:
-
Kurt Garloff authored
commit cd298f60 upstream. In SRAT v1, we had 8bit proximity domain (PXM) fields; SRAT v2 provides 32bits for these. The new fields were reserved before. According to the ACPI spec, the OS must disregrard reserved fields. x86/x86-64 was rather inconsistent prior to this patch; it used 8 bits for the pxm field in cpu_affinity, but 32 bits in mem_affinity. This patch makes it consistent: Either use 8 bits consistently (SRAT rev 1 or lower) or 32 bits (SRAT rev 2 or higher). cc: x86@kernel.org Signed-off-by:
-
Kurt Garloff authored
commit 8df0eb7c upstream. In SRAT v1, we had 8bit proximity domain (PXM) fields; SRAT v2 provides 32bits for these. The new fields were reserved before. According to the ACPI spec, the OS must disregrard reserved fields. In order to know whether or not, we must know what version the SRAT table has. This patch stores the SRAT table revision for later consumption by arch specific __init functions. Signed-off-by:
-
Shaohua Li authored
commit 39a74fde upstream. smp_call_function() only lets all other CPUs execute a specific function, while we expect all CPUs do in intel_idle. Without the fix, we could have one cpu which has auto_demotion enabled or has no broadcast timer setup. Usually we don't see impact because auto demotion just harms power and the intel_idle init is called in CPU 0, where boradcast timer delivers interrupt, but this still could be a problem. Signed-off-by:
Shaohua Li <shaohua.li@intel.com> Signed-off-by:
-
Thomas Renninger authored
commit 5c2a9f06 upstream. kvm -cpu host passes the original cpuid info to the guest. Latest kvm version seem to return true for mwait_leaf cpuid function on recent Intel CPUs. But it does not return mwait C-states (mwait_substates), instead zero is returned. While real CPUs seem to always return non-zero values, the intel idle driver should not get active in kvm (mwait_substates == 0) case and bail out. Otherwise a Null pointer exception will happen later when the cpuidle subsystem tries to get active: [0.984807] BUG: unable to handle kernel NULL pointer dereference at (null) [0.984807] IP: [<(null)>] (null) ... [0.984807][<ffffffff8143cf34>] ? cpuidle_idle_call+0xb4/0x340 [0.984807][<ffffffff8159e7bc>] ? __atomic_notifier_call_chain+0x4c/0x70 [0.984807][<ffffffff81001198>] ? cpu_idle+0x78/0xd0 Reference: https://bugzilla.novell.com/show_bug.cgi?id=726296Signed-off-by:
Thomas Renninger <trenn@suse.de> CC: Bruno Friedmann <bruno@ioda-net.ch> Signed-off-by:
-
Tetsuo Handa authored
commit 25add8cf upstream. TOMOYO 2.5 in Linux 3.2 and later handles Unix domain socket's address. Thus, tomoyo_correct_word2() needs to accept \000 as a valid character, or TOMOYO 2.5 cannot handle Unix domain's abstract socket address. Reported-by:
Steven Allen <steven@stebalien.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
James Morris <jmorris@namei.org> Signed-off-by:
-
David Henningsson authored
commit ffe535ed upstream. More than one user reports that changing the model from "both" to "dmic" makes their Internal Mic work. Tested-by:
Martin Ling <martin-launchpad@earth.li> BugLink: https://bugs.launchpad.net/bugs/795823Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Clemens Ladisch authored
commit f0e48b6b upstream. The two DACs for the front output and the surround/center/LFE/back outputs are wired up out of phase, so when channels are duplicated, their sound can cancel out each other and result in a weaker bass response. To fix this, reverse the polarity of the neutron flow to the front output. Reported-any-tested-by:
Daniel Hill <daniel@enemyplanet.geek.nz> Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
David Henningsson authored
commit b01de4fb upstream. Several users have reported "choppy" audio under the 3.2 kernel, and that changing position_fix to 1 has resolved their problem. The chip is an nVidia Corporation MCP89 High Definition Audio, [10de:0d94] (rev a2). BugLink: https://bugs.launchpad.net/bugs/909419Signed-off-by:
-
Linus Torvalds authored
commit e268337d upstream. Jüri Aedla reported that the /proc/<pid>/mem handling really isn't very robust, and it also doesn't match the permission checking of any of the other related files. This changes it to do the permission checks at open time, and instead of tracking the process, it tracks the VM at the time of the open. That simplifies the code a lot, but does mean that if you hold the file descriptor open over an execve(), you'll continue to read from the _old_ VM. That is different from our previous behavior, but much simpler. If somebody actually finds a load where this matters, we'll need to revert this commit. I suspect that nobody will ever notice - because the process mapping addresses will also have changed as part of the execve. So you cannot actually usefully access the fd across a VM change simply because all the offsets for IO would have changed too. Reported-by:
Jüri Aedla <asd@ut.ee> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
