Pull jfs updates from David Kleikamp:
 "A few jfs fixes"

* tag 'jfs-5.12' of git://github.com/kleikamp/linux-shaggy:
  fs/jfs: fix potential integer overflow on shift of a int
  jfs: turn diLog(), dataLog() and txLog() into void functions
  JFS: more checks for invalid superblock

Pull fcntl fix from Jeff Layton.

* tag 'locks-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  fcntl: make F_GETOWN(EX) return 0 on dead owner task

Pull namei updates from Al Viro:
 "Most of that pile is LOOKUP_CACHED series; the rest is a couple of
  misc cleanups in the general area...

  There's a minor bisect hazard in the end of series, and normally I
  would've just folded the fix into the previous commit, but this branch
  is shared with Jens' tree, with stuff on top of it in there, so that
  would've required rebases outside of vfs.git"

* 'work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix handling of nd->depth on LOOKUP_CACHED failures in try_to_unlazy*
  fs: expose LOOKUP_CACHED through openat2() RESOLVE_CACHED
  fs: add support for LOOKUP_CACHED
  saner calling conventions for unlazy_child()
  fs: make unlazy_walk() error handling consistent
  fs/namei.c: Remove unlikely of status being -ECHILD in lookup_fast()
  do_tmpfile(): don't mess with finish_open()

Pull ELF compat updates from Al Viro:
 "Sanitizing ELF compat support, especially for triarch architectures:

   - X32 handling cleaned up

   - MIPS64 uses compat_binfmt_elf.c both for O32 and N32 now

   - Kconfig side of things regularized

  Eventually I hope to have compat_binfmt_elf.c killed, with both native
  and compat built from fs/binfmt_elf.c, with -DELF_BITS={64,32} passed
  by kbuild, but that's a separate story - not included here"

* 'work.elf-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  get rid of COMPAT_ELF_EXEC_PAGESIZE
  compat_binfmt_elf: don't bother with undef of ELF_ARCH
  Kconfig: regularize selection of CONFIG_BINFMT_ELF
  mips compat: switch to compat_binfmt_elf.c
  mips: don't bother with ELF_CORE_EFLAGS
  mips compat: don't bother with ELF_ET_DYN_BASE
  mips: KVM_GUEST makes no sense for 64bit builds...
  mips: kill unused definitions in binfmt_elf[on]32.c
  mips binfmt_elf*32.c: use elfcore-compat.h
  x32: make X32, !IA32_EMULATION setups able to execute x32 binaries
  [amd64] clean PRSTATUS_SIZE/SET_PR_FPVALID up properly
  elf_prstatus: collect the common part (everything before pr_reg) into a struct
  binfmt_elf: partially sanitize PRSTATUS_SIZE and SET_PR_FPVALID

Pull sendfile updates from Al Viro:
 "Make sendfile() to pipe destination do the right thing, should make
  'fs/pipe: allow sendfile() to pipe again' redundant"

* 'work.sendfile' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  teach sendfile(2) to handle send-to-pipe directly
  take the guts of file-to-pipe splice into a helper function
  do_splice_to(): move the logics for limiting the read length in

Pull PNP updates from Rafael Wysocki:
 "These make two janitorial changes of the code.

  Specifics:

   - Add printf annotation to a logging function (Tom Rix)

   - Use DEFINE_SPINLOCK() for defining a spinlock so as to initialize
     it statically (Zheng Yongjun)"

* tag 'pnp-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PNP: pnpbios: Use DEFINE_SPINLOCK() for spinlock
  PNP: add printf attribute to log function

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to upstream revision
  20210105, fix and clean up the handling of device properties, add
  support for setting global profile of the platform, clean up device
  enumeration, the CPPC library, the APEI support and more, update the
  documentation, consolidate the printing of messages in several places
  and make assorted janitorial changes.

  Specifics:

   - Update ACPICA code in the kernel to upstream revision 20201113 with
     changes as follows:

      * Remove the MTMR (Mid-Timer) table (Al Stone).
      * Remove the VRTC table (Al Stone).
      * Add type casts for string functions (Bob Moore).
      * Update all copyrights to 2021 (Bob Moore).
      * Fix exception code class checks (Maximilian Luz).
      * Clean up exception code class checks (Maximilian Luz).
      * Fix -Wfallthrough (Nick Desaulniers).

   - Add support for setting and reading global profile of the platform
     along with documentation (Mark Pearson, Hans de Goede, Jiaxun
     Yang).

   - Fix fwnode properties matching and clean up the code handling
     device properties and its documentation (Rafael Wysocki, Andy
     Shevchenko).

   - Clean up ACPI-based device enumeration code (Rafael Wysocki).

   - Clean up the CPPC support library code (Ionela Voinescu).

   - Clean up the APEI support code (Yang Li, Yazen Ghannam).

   - Update GPIO-related properties documentation (Flavio Suligoi).

   - Consolidate and clean up the printing of messages in several places
     (Rafael Wysocki).

   - Fix error code path in configfs handling code (Qinglang Miao).

   - Use DEVICE_ATTR_<RW|RO|WO> macros where applicable (Dwaipayan Ray).

   - Replace tests for !ACPI_FAILURE with tests for ACPI_SUCCESS in
     multiple places (Bjorn Helgaas)"

* tag 'acpi-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits)
  ACPI: property: Satisfy kernel doc validator (part 2)
  ACPI: property: Satisfy kernel doc validator (part 1)
  ACPI: property: Make acpi_node_prop_read() static
  ACPI: property: Remove dead code
  ACPI: property: Fix fwnode string properties matching
  ACPI: OSL: Clean up printing messages
  ACPI: OSL: Rework acpi_check_resource_conflict()
  ACPI: APEI: ERST: remove unneeded semicolon
  ACPI: thermal: Clean up printing messages
  ACPI: video: Clean up printing messages
  ACPI: button: Clean up printing messages
  ACPI: battery: Clean up printing messages
  ACPI: AC: Clean up printing messages
  ACPI: bus: Drop ACPI_BUS_COMPONENT which is not used any more
  ACPI: utils: Clean up printing messages
  ACPI: scan: Clean up printing messages
  ACPI: bus: Clean up printing messages
  ACPI: PM: Clean up printing messages
  ACPI: power: Clean up printing messages
  ACPI: APEI: Add is_generic_error() to identify GHES sources
  ...

Pull power management updates from Rafael Wysocki:
 "These add a new power capping facility allowing aggregate power
  constraints to be applied to sets of devices in a distributed manner,
  add a new CPU ID to the RAPL power capping driver and improve it, drop
  a cpufreq driver belonging to a platform that is not supported any
  more, drop two redundant cpufreq driver flags, update cpufreq drivers
  (intel_pstate, brcmstb-avs, qcom-hw), update the operating performance
  points (OPP) framework (code cleanups, new helpers, devfreq-related
  modifications), clean up devfreq, extend the PM clock layer, update
  the cpupower utility and make assorted janitorial changes.

  Specifics:

   - Add new power capping facility called DTPM (Dynamic Thermal Power
     Management), based on the existing power capping framework, to
     allow aggregate power constraints to be applied to sets of devices
     in a distributed manner, along with a CPU backend driver based on
     the Energy Model (Daniel Lezcano, Dan Carpenter, Colin Ian King).

   - Add AlderLake Mobile support to the Intel RAPL power capping driver
     and make it use the topology interface when laying out the system
     topology (Zhang Rui, Yunfeng Ye).

   - Drop the cpufreq tango driver belonging to a platform that is not
     supported any more (Arnd Bergmann).

   - Drop the redundant CPUFREQ_STICKY and CPUFREQ_PM_NO_WARN cpufreq
     driver flags (Viresh Kumar).

   - Update cpufreq drivers:

      * Fix max CPU frequency discovery in the intel_pstate driver and
        make janitorial changes in it (Chen Yu, Rafael Wysocki, Nigel
        Christian).

      * Fix resource leaks in the brcmstb-avs-cpufreq driver (Christophe
        JAILLET).

      * Make the tegra20 driver use the resource-managed API (Dmitry
        Osipenko).

      * Enable boost support in the qcom-hw driver (Shawn Guo).

   - Update the operating performance points (OPP) framework:

      * Clean up the OPP core (Dmitry Osipenko, Viresh Kumar).

      * Extend the OPP API by adding new helpers to it (Dmitry Osipenko,
        Viresh Kumar).

      * Allow required OPPs to be used for devfreq devices and update
        the devfreq governor code accordingly (Saravana Kannan).

      * Prepare the framework for introducing new dev_pm_opp_set_opp()
        helper (Viresh Kumar).

      * Drop dev_pm_opp_set_bw() and update related drivers (Viresh
        Kumar).

      * Allow lazy linking of required-OPPs (Viresh Kumar).

   - Simplify and clean up devfreq somewhat (Lukasz Luba, Yang Li,
     Pierre Kuo).

   - Update the generic power domains (genpd) framework:

      * Use device's next wakeup to determine domain idle state (Lina
        Iyer).

      * Improve initialization and debug (Dmitry Osipenko).

      * Simplify computations (Abaci Team).

   - Make janitorial changes in the core code handling system sleep and
     PM-runtime (Bhaskar Chowdhury, Bjorn Helgaas, Rikard Falkeborn,
     Zqiang).

   - Update the MAINTAINERS entry for the exynos cpuidle driver and drop
     DEBUG definition from intel_idle (Krzysztof Kozlowski, Tom Rix).

   - Extend the PM clock layer to cover clocks that must sleep (Nicolas
     Pitre).

   - Update the cpupower utility:

      * Update cpupower command, add support for AMD family 0x19 and
        clean up the code to remove many of the family checks to make
        future family updates easier (Nathan Fontenot, Robert Richter).

      * Add Makefile dependencies for install targets to allow building
        cpupower in parallel rather than serially (Ivan Babrou).

   - Make janitorial changes in power management Kconfig (Lukasz Luba)"

* tag 'pm-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits)
  MAINTAINERS: cpuidle: exynos: include header in file pattern
  powercap: intel_rapl: Use topology interface in rapl_init_domains()
  powercap: intel_rapl: Use topology interface in rapl_add_package()
  PM: sleep: Constify static struct attribute_group
  PM: Kconfig: remove unneeded "default n" options
  PM: EM: update Kconfig description and drop "default n" option
  cpufreq: Remove unused flag CPUFREQ_PM_NO_WARN
  cpufreq: Remove CPUFREQ_STICKY flag
  PM / devfreq: Add required OPPs support to passive governor
  PM / devfreq: Cache OPP table reference in devfreq
  OPP: Add function to look up required OPP's for a given OPP
  PM / devfreq: rk3399_dmc: Remove unneeded semicolon
  opp: Replace ENOTSUPP with EOPNOTSUPP
  opp: Fix "foo * bar" should be "foo *bar"
  opp: Don't ignore clk_get() errors other than -ENOENT
  opp: Update bandwidth requirements based on scaling up/down
  opp: Allow lazy-linking of required-opps
  opp: Remove dev_pm_opp_set_bw()
  devfreq: tegra30: Migrate to dev_pm_opp_set_opp()
  drm: msm: Migrate to dev_pm_opp_set_opp()
  ...

Pull staging and IIO driver updates from Greg KH:
 "Here is the "big" set of staging and IIO driver patches for 5.12-rc1.

  Nothing really huge in here, the number of staging tree patches has
  gone down for a bit, maybe there's only so much churn to happen in
  here at the moment.

  The IIO changes are:

   - new drivers

   - new DT bindings

   - new iio driver features

  with full details in the shortlog.

  The staging driver patches are just a lot of tiny coding style
  cleanups, along with some semi-larger hikey driver cleanups as those
  are _almost_ good enough to get out of the staging tree, but will
  probably have to wait until 5.13 to have happen.

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (189 commits)
  staging: hikey9xx: Fix alignment of function parameters
  staging: greybus: Fixed a misspelling in hid.c
  staging: wimax/i2400m: fix some byte order issues found by sparse
  staging: wimax: i2400m: fix some incorrect type warnings
  staging: greybus: minor code style fix
  staging:wlan-ng: use memdup_user instead of kmalloc/copy_from_user
  staging:r8188eu: use IEEE80211_FCTL_* kernel definitions
  staging: rtl8192e: remove multiple blank lines
  staging: greybus: Fixed alignment issue in hid.c
  staging: wfx: remove unused included header files
  staging: nvec: minor coding style fix
  staging: wimax: Fix some coding style problem
  staging: fbtft: add tearing signal detect
  staging: vt6656: Fixed issue with alignment in rf.c
  staging: qlge: Remove duplicate word in comment
  staging: rtl8723bs: remove obsolete commented out code
  staging: rtl8723bs: fix function comments to follow kernel-doc
  staging: wfx: avoid defining array of flexible struct
  staging: rtl8723bs: Replace one-element array with flexible-array member in struct ndis_80211_var_ie
  staging: Replace lkml.org links with lore
  ...

Pull USB and Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver changes for
  5.12-rc1.

  It's been an active set of development in these subsystems for the
  past few months:

   - loads of typec features added for new hardware

   - xhci features and bugfixes

   - dwc3 features added for more hardware support

   - dwc2 fixes and new hardware support

   - cdns3 driver updates for more hardware support

   - gadget driver cleanups and minor fixes

   - usb-serial fixes, new driver, and more devices supported

   - thunderbolt feature additions for new hardware

   - lots of other tiny fixups and additions

  The chrome driver changes are in here as well, as they depended on
  some of the typec changes, and the maintainer acked them.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (300 commits)
  dt-bindings: usb: mediatek: musb: add mt8516 compatbile
  dt-bindings: usb: mtk-xhci: add compatible for mt2701 and mt7623
  dt-bindings: usb: mtk-xhci: add optional assigned clock properties
  Documentation: connector: Update the description of sink-vdos
  usb: misc: usb3503: Fix logic in usb3503_init()
  dt-bindings: usb: usb-device: fix typo in required properties
  usb: Replace lkml.org links with lore
  dt-bindings: usb: dwc3: add description for rk3328
  dt-bindings: usb: convert rockchip,dwc3.txt to yaml
  usb: quirks: add quirk to start video capture on ELMO L-12F document camera reliable
  USB: quirks: sort quirk entries
  USB: serial: drop bogus to_usb_serial_port() checks
  USB: serial: make remove callback return void
  USB: serial: drop if with an always false condition
  usb: gadget: Assign boolean values to a bool variable
  usb: typec: tcpm: Get Sink VDO from fwnode
  dt-bindings: connector: Add SVDM VDO properties
  usb: typec: displayport: Fill the negotiated SVDM Version in the header
  usb: typec: ucsi: Determine common SVDM Version
  usb: typec: tcpm: Determine common SVDM Version
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty/serial driver changes for 5.12-rc1.

  Nothing huge, just lots of good cleanups and additions:

   - n_tty line discipline cleanups

   - vt core cleanups and reworks to make the code more "modern"

   - stm32 driver additions

   - tty led support added to the tty core and led layer

   - minor serial driver fixups and additions

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (54 commits)
  serial: core: Remove BUG_ON(in_interrupt()) check
  vt_ioctl: Remove in_interrupt() check
  dt-bindings: serial: imx: Switch to my personal address
  vt: keyboard, use new API for keyboard_tasklet
  serial: stm32: improve platform_get_irq condition handling in init_port
  serial: ifx6x60: Remove driver for deprecated platform
  tty: fix up iterate_tty_read() EOVERFLOW handling
  tty: fix up hung_up_tty_read() conversion
  tty: fix up hung_up_tty_write() conversion
  tty: teach the n_tty ICANON case about the new "cookie continuations" too
  tty: teach n_tty line discipline about the new "cookie continuations"
  tty: clean up legacy leftovers from n_tty line discipline
  tty: implement read_iter
  tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer
  serial: remove sirf prima/atlas driver
  serial: mxs-auart: Remove <asm/cacheflush.h>
  serial: mxs-auart: Remove serial_mxs_probe_dt()
  serial: fsl_lpuart: Use of_device_get_match_data()
  dt-bindings: serial: renesas,hscif: Add r8a779a0 support
  tty: serial: Drop unused efm32 serial driver
  ...

Al root-caused a new warning from syzbot to the ttyprintk tty driver
returning a write count larger than the data the tty layer actually gave
it.  Which confused the tty write code mightily, and with the new
iov_iter based code, caused a WARNING in iov_iter_revert().

syzbot correctly bisected the source of the new warning to commit
9bb48c82 ("tty: implement write_iter"), but the oddity goes back
much further, it just didn't get caught by anything before.

Reported-by: syzbot+3d2c27c2b7dc2a94814d@syzkaller.appspotmail.com
Fixes: 9bb48c82 ("tty: implement write_iter")
Debugged-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull x86 asm updates from Borislav Petkov:
 "Annotate new MMIO-accessing insn wrappers' arguments with __iomem"

* tag 'x86_asm_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm: Add a missing __iomem annotation in enqcmds()
  x86/asm: Annotate movdir64b()'s dst argument with __iomem

Pull x86 build updates from Borislav Petkov:

 - Treat R_386_PLT32 relocations like R_386_PC32 ones when building

 - Add documentation about "make kvm_guest/xen.config" in "make help"
   output

* tag 'x86_build_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Treat R_386_PLT32 relocation as R_386_PC32
  x86/build: Realign archhelp
  x86/build: Add {kvm_guest,xen}.config targets to make help's output

Pull x86 resource control updates from Borislav Petkov:
 "Avoid IPI-ing a task in certain cases and prevent load/store tearing
  when accessing a task's resctrl fields concurrently"

* tag 'x86_cache_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Apply READ_ONCE/WRITE_ONCE to task_struct.{rmid,closid}
  x86/resctrl: Use task_curr() instead of task_struct->on_cpu to prevent unnecessary IPI
  x86/resctrl: Add printf attribute to log function

Pull x86 CPUID cleanup from Borislav Petkov:
 "Assign a dedicated feature word to a CPUID leaf which is widely used"

* tag 'x86_cpu_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpufeatures: Assign dedicated feature word for CPUID_0x8000001F[EAX]

Pull x86 FPU updates from Borislav Petkov:
 "x86 fpu usage optimization and cleanups:

   - make 64-bit kernel code which uses 387 insns request a x87 init
     (FNINIT) explicitly when using the FPU

   - misc cleanups"

* tag 'x86_fpu_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu/xstate: Use sizeof() instead of a constant
  x86/fpu/64: Don't FNINIT in kernel_fpu_begin()
  x86/fpu: Make the EFI FPU calling convention explicit

Pull x86 microcode cleanup from Borislav Petkov:
 "Make the driver init function static again"

* tag 'x86_microcode_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Make microcode_init() static

Pull x86 misc updates from Borislav Petkov:

 - Complete the MSR write filtering by applying it to the MSR ioctl
   interface too.

 - Other misc small fixups.

* tag 'x86_misc_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/MSR: Filter MSR writes through X86_IOC_WRMSR_REGS ioctl too
  selftests/fpu: Fix debugfs_simple_attr.cocci warning
  selftests/x86: Use __builtin_ia32_read/writeeflags
  x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk

Pull x86 mm cleanups from Borislav Petkov:

 - PTRACE_GETREGS/PTRACE_PUTREGS regset selection cleanup

 - Another initial cleanup - more to follow - to the fault handling
   code.

 - Other minor cleanups and corrections.

* tag 'x86_mm_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  x86/{fault,efi}: Fix and rename efi_recover_from_page_fault()
  x86/fault: Don't run fixups for SMAP violations
  x86/fault: Don't look for extable entries for SMEP violations
  x86/fault: Rename no_context() to kernelmode_fixup_or_oops()
  x86/fault: Bypass no_context() for implicit kernel faults from usermode
  x86/fault: Split the OOPS code out from no_context()
  x86/fault: Improve kernel-executing-user-memory handling
  x86/fault: Correct a few user vs kernel checks wrt WRUSS
  x86/fault: Document the locking in the fault_signal_pending() path
  x86/fault/32: Move is_f00f_bug() to do_kern_addr_fault()
  x86/fault: Fold mm_fault_error() into do_user_addr_fault()
  x86/fault: Skip the AMD erratum #91 workaround on unaffected CPUs
  x86/fault: Fix AMD erratum #91 errata fixup for user code
  x86/Kconfig: Remove HPET_EMULATE_RTC depends on RTC
  x86/asm: Fixup TASK_SIZE_MAX comment
  x86/ptrace: Clean up PTRACE_GETREGS/PTRACE_PUTREGS regset selection
  x86/vm86/32: Remove VM86_SCREEN_BITMAP support
  x86: Remove definition of DEBUG
  x86/entry: Remove now unused do_IRQ() declaration
  x86/mm: Remove duplicate definition of _PAGE_PAT_LARGE
  ...

Pull x86 paravirt updates from Borislav Petkov:
 "Part one of a major conversion of the paravirt infrastructure to our
  kernel patching facilities and getting rid of the custom-grown ones"

* tag 'x86_paravirt_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pv: Rework arch_local_irq_restore() to not use popf
  x86/xen: Drop USERGS_SYSRET64 paravirt call
  x86/pv: Switch SWAPGS to ALTERNATIVE
  x86/xen: Use specific Xen pv interrupt entry for DF
  x86/xen: Use specific Xen pv interrupt entry for MCE

Pull x86 platform updates from Borislav Petkov:

 - Convert geode drivers to look up the LED controls from a GPIO machine
   descriptor table.

 - Remove arch/x86/platform/goldfish as it is not used by the android
   emulator anymore.

* tag 'x86_platform_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/geode: Convert alix LED to GPIO machine descriptor
  x86/platform/geode: Convert geode LED to GPIO machine descriptor
  x86/platform/geode: Convert net5501 LED to GPIO machine descriptor
  x86/platform: Retire arch/x86/platform/goldfish
  x86/platform/intel-mid: Convert comma to semicolon

Pull x86 SEV-ES fix from Borislav Petkov:
 "Do not unroll string I/O for SEV-ES guests because they support it"

* tag 'x86_seves_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev-es: Do not unroll string I/O for SEV-ES guests

Pull x86 SGX fixes from Borislav Petkov:
 "Random small fixes which missed the initial SGX submission. Also, some
  procedural clarifications"

* tag 'x86_sgx_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Add Dave Hansen as reviewer for INTEL SGX
  x86/sgx: Drop racy follow_pfn() check
  MAINTAINERS: Fix the tree location for INTEL SGX patches
  x86/sgx: Fix the return type of sgx_init()

Pull EFI updates from Ard Biesheuvel via Borislav Petkov:
 "A few cleanups left and right, some of which were part of a initrd
  measured boot series that needs some more work, and so only the
  cleanup patches have been included for this release"

* tag 'efi-next-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/arm64: Update debug prints to reflect other entropy sources
  efi: x86: clean up previous struct mm switching
  efi: x86: move mixed mode stack PA variable out of 'efi_scratch'
  efi/libstub: move TPM related prototypes into efistub.h
  efi/libstub: fix prototype of efi_tcg2_protocol::get_event_log()
  efi/libstub: whitespace cleanup
  efi: ia64: move IA64-only declarations to new asm/efi.h header

Pull RAS updates from Borislav Petkov:

 - move therm_throt.c to the thermal framework, where it belongs.

 - identify CPUs which miss to enter the broadcast handler, as an
   additional debugging aid.

* tag 'ras_updates_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  thermal: Move therm_throt there from x86/mce
  x86/mce: Get rid of mcheck_intel_therm_init()
  x86/mce: Make mce_timed_out() identify holdout CPUs

Pull EDAC updates from Borislav Petkov:

 - a couple of fixes/improvements to amd64_edac:
    * merge debugging and error injection functionality into the main driver
    * tone down info/error output
    * do not attempt to load it on F15h client hw

 - misc fixes to other drivers

* tag 'edac_updates_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/amd64: Issue probing messages only on properly detected hardware
  EDAC/xgene: Do not print a failure message to get an IRQ twice
  EDAC/ppc4xx: Convert comma to semicolon
  EDAC/amd64: Limit error injection functionality to supported hw
  EDAC/amd64: Merge error injection sysfs facilities
  EDAC/amd64: Merge sysfs debugging attributes setup code
  EDAC/amd64: Tone down messages about missing PCI IDs
  EDAC/amd64: Do not load on family 0x15, model 0x13

Pull ARM SoC driver updates from Arnd Bergmann:
 "Updates for SoC specific drivers include a few subsystems that have
  their own maintainers but send them through the soc tree:

  SCMI firmware:
   - add support for a completion interrupt

  Reset controllers:
   - new driver for BCM4908
   - new devm_reset_control_get_optional_exclusive_released() function

  Memory controllers:
   - Renesas RZ/G2 support
   - Tegra124 interconnect support
   - Allow more drivers to be loadable modules

  TEE/optee firmware:
   - minor code cleanup

  The other half of this is SoC specific drivers that do not belong into
  any other subsystem, most of them living in drivers/soc:

   - Allwinner/sunxi power management work
   - Allwinner H616 support

   - ASpeed AST2600 system identification support

   - AT91 SAMA7G5 SoC ID driver
   - AT91 SoC driver cleanups

   - Broadcom BCM4908 power management bus support

   - Marvell mbus cleanups

   - Mediatek MT8167 power domain support

   - Qualcomm socinfo driver support for PMIC
   - Qualcomm SoC identification for many more products

   - TI Keystone driver cleanups for PRUSS and elsewhere"

* tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (89 commits)
  soc: aspeed: socinfo: Add new systems
  soc: aspeed: snoop: Add clock control logic
  memory: tegra186-emc: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
  memory: samsung: exynos5422-dmc: Correct function names in kerneldoc
  memory: ti-emif-pm: Drop of_match_ptr from of_device_id table
  optee: simplify i2c access
  drivers: soc: atmel: fix type for same7
  tee: optee: remove need_resched() before cond_resched()
  soc: qcom: ocmem: don't return NULL in of_get_ocmem
  optee: sync OP-TEE headers
  tee: optee: fix 'physical' typos
  drivers: optee: use flexible-array member instead of zero-length array
  tee: fix some comment typos in header files
  soc: ti: k3-ringacc: Use of_device_get_match_data()
  soc: ti: pruss: Refactor the CFG sub-module init
  soc: mediatek: pm-domains: Don't print an error if child domain is deferred
  soc: mediatek: pm-domains: Add domain regulator supply
  dt-bindings: power: Add domain regulator supply
  soc: mediatek: cmdq: Remove cmdq_pkt_flush()
  soc: mediatek: pm-domains: Add support for mt8167
  ...

Pull ARM SoC devicetree updates from Arnd Bergmann:
 "After the last release contained a surprising amount of new 32-bit
  machines, this time two thirds of the code changes are for 64-bit.

  The usual updates to existing files include:

   - Device tree compiler warning fixes for Berlin, Renesas, SoCFPGA,
     nomadik, stm32, Allwinner, TI Keystone

   - Support for additional devices on existing machines on Renesas,
     SoCFPGA, at91, hisilicon, OMAP, Tegra, TI K3, Allwinner, Broadcom,
     ux500, Mediatek, Marvell Armada, Marvell MMP, ZynqMP, AMLogic,
     Qualcomm, i.MX, Layerscape, Actions, ASpeed, Toshiba

   - Cleanups and minor fixes for Renesas, at91, mstar, ux500, Samsung,
     stm32, Tegra, Broadcom, Mediatek, Marvell MMP, AMLogic, Qualcomm,
     i.MX, Rockchip, ASpeed, Zynq

  Only three new SoCs this time, but a number of boards across:

  Renesas:
   - Two Beacon EmbeddedWorks boards (RZ/G2H and RZ/G2N based)

  Intel SoCFPGA:
   - eASIC N5X board (N5X)

  ST-Ericsson Ux500:
   - Samsung GT-I9070 (Janice) phone (u8500)

  TI OMAP:
   - MYIR Tech Limited development board (AM335X)

  Allwinner/sunxi:
   - SL631 Action Camera (V3)
   - PineTab Early Adopter tablet (A64)

  Broadcom:
   - BCM4906 networking chip
   - Netgear R8000P router (BCM4906)

  AMLogic:
   - Hardkernel ODROID-HC4 development board (SM1)
   - Beelink GS-King-X TV Box (S922X)

  Qualcomm:
   - Snapdragon 888 / SM8350 high-end phone SoC
   - Qualcomm SDX55 5G modem as standalone SoC
   - Snapdragon MTP reference board (SM8350)
   - Snapdragon MTP reference board (SDX55)
   - Sony Kitakami phones: Xperia Z3+/Z4/Z5 (APQ8094)
   - Alcatel Idol 3 phone (MSM8916)
   - ASUS Zenfone 2 Laser phone (MSM8916)
   - BQ Aquaris X5 aka Longcheer L8910 phone (MSM8916)
   - OnePlus6 phone (SDM845)
   - OnePlus6T phone (SDM845)
   - Alfa Network AP120C-AC access point (IPQ4018)

  NXP i.MX6 (32-bit):
   - Plymovent BAS base system controller for filter systems (imx6dl)
   - Protonic MVT industrial touchscreen terminals (imx6dl)
   - Protonic PRTI6G reference board (imx6ul)
   - Kverneland UT1, UT1Q, UT1P, TGO agricultural terminals (imx6q/dl/qp)

  NXP i.MX8 (64-bit)
   - Beacon i.MX8M Nano development kit (imx8mn)
   - Boundary Devices i.MX8MM Nitrogen SBC (imx8mm)
   - Gateworks Venice i.MX 8M Mini Development Kits (imx8mm)
   - phyBOARD-Pollux-i.MX8MP (imx8mp)
   - Purism Librem5 Evergreen phone (imx8mp)
   - Kontron SMARC-sAL28 system-on-module(imx8mp)

  Rockchip:
   - NanoPi M4B Single-board computer (RK3399)
   - Radxa Rock Pi E router SBC (RK3328)

  ASpeed:
   - Ampere Mt. Jade, a BMC for an x86 server (AST2500)
   - IBM Everest, a BMC for a Power10 server (AST2600)
   - Supermicro x11spi, a BMC for an ARM server (AST2500)

  Zynq:
   - Ebang EBAZ4205, FPGA board (Zynq-7000)
   - ZynqMP zcu104 revC reference platform (ZynqMP)"

* tag 'arm-dt-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (584 commits)
  ARM: dts: aspeed: align GPIO hog names with dtschema
  ARM: dts: aspeed: fix PCA95xx GPIO expander properties on Portwell
  dt-bindings: spi: zynq: Convert Zynq QSPI binding to yaml
  arm: dts: visconti: Add DT support for Toshiba Visconti5 GPIO driver
  ARM: dts: aspeed: ast2600evb: Add enable ehci and uhci
  ARM: dts: aspeed: mowgli: Add i2c rtc device
  ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address
  dt-bindings: arm: xilinx: Add missing Zturn boards
  ARM: dts: ebaz4205: add pinctrl entries for switches
  ARM: dts: add Ebang EBAZ4205 device tree
  dt-bindings: arm: add Ebang EBAZ4205 board
  dt-bindings: add ebang vendor prefix
  ARM: dts: aspeed: Add Everest BMC machine
  ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver
  ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names
  ARM: dts: aspeed: Add Supermicro x11spi BMC machine
  ARM: dts: aspeed: g220a: Fix some gpio
  ARM: dts: aspeed: g220a: Enable ipmb
  ARM: dts: aspeed: rainier: Add eMMC clock phase compensation
  ARM: dts: aspeed: Add LCLK to lpc-snoop
  ...

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "As usual, a number of additional device drivers that were added to the
  kernel are now enabled in the respective configuration files.

  A few of the files get updated to match the current Kconfig files for
  removed or renamed options"

* tag 'arm-defconfig-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
  ARM: configs: sama5_defconfig: add QSPI driver
  ARM: configs: at91_dt_defconfig: add ov7740 module
  ARM: configs: at91_dt_defconfig: add useful helper options
  ARM: configs: at91: DT/ATAG defconfig modifications
  ARM: configs: sama5_defconfig: update and remove unneeded options
  ARM: configs: at91: enable drivers for sam9x60
  arm64: defconfig: Enable RT5659
  arm64: configs: Support DEVAPC on MediaTek platforms
  arm64: configs: Support pwrap on Mediatek MT6779 platform
  arm64: defconfig: Enable PF8x00 as builtin
  ARM: multi_v7_defconfig: add STM32 CEC support
  arm64: defconfig: Enable vibra-pwm
  ARM: omap2plus_defconfig: Update for dropped options
  ARM: omap2plus_defconfig: Update for moved options
  ARM: multi_v7_defconfig: Enable nvmem's rmem driver
  arm64: defconfig: Enable nvmem's rmem driver
  ARM: multi_v7_defconfig: Enable support for the ADC thermal sensor
  ARM: qcom_defconfig: Enable Command DB driver
  ARM: qcom_defconfig: Enable RPMh power domain driver
  ARM: qcom_defconfig: Enable ARM PSCI support
  ...

Pull ARM SoC updates from Arnd Bergmann:
 "This is mostly 32-bit code for SoC platforms, and looks smaller than
  any such branch I remember from previous kernels, as most of this is
  now handled in other subsystems for modern platforms:

   - Minor bugfixes and Kconfig updates for Tegra, Broadcom, i.MX,
     Renesas, and Samsung

   - Updates to the MAINTAINERS listing for Actions, OMAP, and Samsung

   - Samsung SoC driver updates to make them loadable modules"

* tag 'arm-soc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: arm: samsung: include S3C headers in platform entry
  MAINTAINERS: Add linux-actions ML for Actions Semi Arch
  ARM: s3c: irq-s3c24xx: staticize local functions
  ARM: s3c: irq-s3c24xx: include headers for missing declarations
  ARM: s3c: fix fiq for clang IAS
  ARM: imx: Remove unused IMX_GPIO_NR() macro
  soc: renesas: rcar-sysc: Mark device node OF_POPULATED after init
  ARM: OMAP2+: fix spellint typo
  MAINTAINERS: Update address for OMAP GPMC driver
  soc: renesas: rcar-sysc: Use readl_poll_timeout_atomic()
  ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835
  ARM: brcmstb: Add debug UART entry for 72116
  ARM: tegra: Don't enable unused PLLs on resume from suspend
  soc: samsung: pm_domains: Convert to regular platform driver
  soc: samsung: exynos-chipid: correct helpers __init annotation
  ARM: mach-imx: imx6ul: Print SOC revision on boot
  ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup
  soc: samsung: exynos-chipid: convert to driver and merge exynos-asv
  soc: samsung: exynos-asv: handle reading revision register error
  soc: samsung: exynos-asv: don't defer early on not-supported SoCs

Pull ARM SoC platform removals from Arnd Bergmann:
 "There are a lot of platforms that have not seen any interesting code
  changes in the past five years or more.

  I made a list and asked around which ones are no longer in use, and
  received confirmation about six ARM platforms and the TI C6x
  architecture that have all reached the end of their life upstream,
  with no known users remaining:

   - efm32 - added in 2011, first Cortex-M, no notable changes after 2013

   - picoxcell - added in 2011, abandoned after 2012 acquisition

   - prima2 - added in 20111, no notable changes since 2015

   - tango - added in 2015, sporadic changes until 2017, but abandoned

   - u300 - added in 2009, no notable changes since 2013

   - zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes

   - arch/c6x - added in 2011, but work stalled soon after that

  A number of other platforms on the original list turned out to still
  have users. In some cases there are out-of-tree patches and users that
  plan to contribute them in the future, in other cases the code is
  complete and works reliably"

Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/

* tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: remove u300 platform
  ARM: remove tango platform
  ARM: remove zte zx platform
  ARM: remove sirf prima2/atlas platforms
  c6x: remove architecture
  MAINTAINERS: Remove deleted platform efm32
  ARM: drop efm32 platform
  ARM: Remove PicoXcell platform support
  ARM: dts: Remove PicoXcell platforms

Pull ARM SoC fixes from Arnd Bergmann:
 "There are only two left-over remaining non-urgent ARM SoC bug fixes:

   - A build fix for the Atmel SAM9 platform to allow building with the
     clang integrated assembler

   - A DT fix for ethernet on Intel SoCFPGA, this has been broken since
     it was added in v5.4"

* tag 'arm-fixes-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: at91: use proper asm syntax in pm_suspend
  arm64: dts: agilex: fix phy interface bit shift for gmac1 and gmac2

Pull networking updates from David Miller:
 "Here is what we have this merge window:

   1) Support SW steering for mlx5 Connect-X6Dx, from Yevgeny Kliteynik.

   2) Add RSS multi group support to octeontx2-pf driver, from Geetha
      Sowjanya.

   3) Add support for KS8851 PHY. From Marek Vasut.

   4) Add support for GarfieldPeak bluetooth controller from Kiran K.

   5) Add support for half-duplex tcan4x5x can controllers.

   6) Add batch skb rx processing to bcrm63xx_enet, from Sieng Piaw
      Liew.

   7) Rework RX port offload infrastructure, particularly wrt, UDP
      tunneling, from Jakub Kicinski.

   8) Add BCM72116 PHY support, from Florian Fainelli.

   9) Remove Dsa specific notifiers, they are unnecessary. From Vladimir
      Oltean.

  10) Add support for picosecond rx delay in dwmac-meson8b chips. From
      Martin Blumenstingl.

  11) Support TSO on xfrm interfaces from Eyal Birger.

  12) Add support for MP_PRIO to mptcp stack, from Geliang Tang.

  13) Support BCM4908 integrated switch, from Rafał Miłecki.

  14) Support for directly accessing kernel module variables via module
      BTF info, from Andrii Naryiko.

  15) Add DASH (esktop and mobile Architecture for System Hardware)
      support to r8169 driver, from Heiner Kallweit.

  16) Add rx vlan filtering to dpaa2-eth, from Ionut-robert Aron.

  17) Add support for 100 base0x SFP devices, from Bjarni Jonasson.

  18) Support link aggregation in DSA, from Tobias Waldekranz.

  19) Support for bitwidse atomics in bpf, from Brendan Jackman.

  20) SmartEEE support in at803x driver, from Russell King.

  21) Add support for flow based tunneling to GTP, from Pravin B Shelar.

  22) Allow arbitrary number of interconnrcts in ipa, from Alex Elder.

  23) TLS RX offload for bonding, from Tariq Toukan.

  24) RX decap offklload support in mac80211, from Felix Fietkou.

  25) devlink health saupport in octeontx2-af, from George Cherian.

  26) Add TTL attr to SCM_TIMESTAMP_OPT_STATS, from Yousuk Seung

  27) Delegated actionss support in mptcp, from Paolo Abeni.

  28) Support receive timestamping when doin zerocopy tcp receive. From
      Arjun Ray.

  29) HTB offload support for mlx5, from Maxim Mikityanskiy.

  30) UDP GRO forwarding, from Maxim Mikityanskiy.

  31) TAPRIO offloading in dsa hellcreek driver, from Kurt Kanzenbach.

  32) Weighted random twos choice algorithm for ipvs, from Darby Payne.

  33) Fix netdev registration deadlock, from Johannes Berg.

  34) Various conversions to new tasklet api, from EmilRenner Berthing.

  35) Bulk skb allocations in veth, from Lorenzo Bianconi.

  36) New ethtool interface for lane setting, from Danielle Ratson.

  37) Offload failiure notifications for routes, from Amit Cohen.

  38) BCM4908 support, from Rafał Miłecki.

  39) Support several new iwlwifi chips, from Ihab Zhaika.

  40) Flow drector support for ipv6 in i40e, from Przemyslaw Patynowski.

  41) Support for mhi prrotocols, from Loic Poulain.

  42) Optimize bpf program stats.

  43) Implement RFC6056, for better port randomization, from Eric
      Dumazet.

  44) hsr tag offloading support from George McCollister.

  45) Netpoll support in qede, from Bhaskar Upadhaya.

  46) 2005/400g speed support in bonding 3ad mode, from Nikolay
      Aleksandrov.

  47) Netlink event support in mptcp, from Florian Westphal.

  48) Better skbuff caching, from Alexander Lobakin.

  49) MRP (Media Redundancy Protocol) offloading in DSA and a few
      drivers, from Horatiu Vultur.

  50) mqprio saupport in mvneta, from Maxime Chevallier.

  51) Remove of_phy_attach, no longer needed, from Florian Fainelli"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1766 commits)
  octeontx2-pf: Fix otx2_get_fecparam()
  cteontx2-pf: cn10k: Prevent harmless double shift bugs
  net: stmmac: Add PCI bus info to ethtool driver query output
  ptp: ptp_clockmatrix: clean-up - parenthesis around a == b are unnecessary
  ptp: ptp_clockmatrix: Simplify code - remove unnecessary `err` variable.
  ptp: ptp_clockmatrix: Coding style - tighten vertical spacing.
  ptp: ptp_clockmatrix: Clean-up dev_*() messages.
  ptp: ptp_clockmatrix: Remove unused header declarations.
  ptp: ptp_clockmatrix: Add alignment of 1 PPS to idtcm_perout_enable.
  ptp: ptp_clockmatrix: Add wait_for_sys_apll_dpll_lock.
  net: stmmac: dwmac-sun8i: Add a shutdown callback
  net: stmmac: dwmac-sun8i: Minor probe function cleanup
  net: stmmac: dwmac-sun8i: Use reset_control_reset
  net: stmmac: dwmac-sun8i: Remove unnecessary PHY power check
  net: stmmac: dwmac-sun8i: Return void from PHY unpower
  r8169: use macro pm_ptr
  net: mdio: Remove of_phy_attach()
  net: mscc: ocelot: select PACKING in the Kconfig
  net: re-solve some conflicts after net -> net-next merge
  net: dsa: tag_rtl4_a: Support also egress tags
  ...

After switching to non-RCU mode, we want nd->depth to match the number
of entries in nd->stack[] that need eventual path_put().
legitimize_links() takes care of that on failures; unfortunately,
failure exits added for LOOKUP_CACHED do not.

We could add the logics for that into those failure exits, both in
try_to_unlazy() and in try_to_unlazy_next(), but since both checks
are immediately followed by legitimize_links() and there's no calls
of legitimize_links() other than those two...  It's easier to
move the check (and required handling of nd->depth on failure) into
legitimize_links() itself.

[caught by Jens: ... and since we are zeroing ->depth here, we need
to do drop_links() first]

Fixes: 6c6ec2b0 "fs: add support for LOOKUP_CACHED"
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Static checkers complained about an off by one read overflow in
otx2_get_fecparam() and we applied two conflicting fixes for it.

Correct: b0aae0bd ("octeontx2: Fix condition.")
  Wrong: 93efb0c6 ("octeontx2-pf: Fix out-of-bounds read in otx2_get_fecparam()")

Revert the incorrect fix.

Fixes: 93efb0c6 ("octeontx2-pf: Fix out-of-bounds read in otx2_get_fecparam()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These defines are used with set_bit() and test_bit() which take a bit
number.  In other words, the code is doing:

	if (BIT(BIT(1)) & pf->hw.cap_flag) {

This was done consistently so it did not cause a problem at runtime but
it's still worth fixing.

Fixes: facede82 ("octeontx2-pf: cn10k: Add mbox support for CN10K")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch populates the PCI bus info in the ethtool driver query data.

Users will be able to view PCI bus info using 'ethtool -i <interface>'.
Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vincent Cheng says:

====================
ptp: ptp_clockmatrix: Fix output 1 PPS alignment.

This series fixes a race condition that may result in the output clock
not aligned to internal 1 PPS clock.

Part of device initialization is to align the rising edge of output
clocks to the internal rising edge of the 1 PPS clock.  If the system
APLL and DPLL are not locked when this alignment occurs, the alignment
fails and a fixed offset between the internal 1 PPS clock and the
output clock occurs.

If a clock is dynamically enabled after power-up, the output clock
also needs to be aligned to the internal 1 PPS clock.

v3:
Suggested by: Jakub Kicinski <kuba@kernel.org>
- Remove unnecessary 'err' variable
- Increase msleep()/loop accuracy by using jiffies in while()
- No empty lines between variables
- No empty lines between call and the if
- parenthesis around a == b are unnecessary
- Inconsistent \n usage in dev_()
- Remove unnecessary empty line
- Leave string format in place so static code checkers can
  validate arguments

v2:
Suggested by: Richard Cochran <richardcochran@gmail.com>
- Added const to "char * fmt"
- Break unrelated header change into separate patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Code clean-up.
Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>