- 16 Aug, 2016 10 commits
-
-
Stephan Mueller authored
When calling the DRBG health test in FIPS mode, the Jitter RNG is not yet present in the kernel crypto API which will cause the instantiation to fail and thus the health test to fail. As the health tests cover the enforcement of various thresholds, invoke the functions that are supposed to enforce the thresholds directly. This patch also saves precious seed. Reported-by:
Tapas Sarangi <TSarangi@trustwave.com> Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Markus Elfring authored
The field "owner" is set by the core. Thus delete an unneeded initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/crypto/ccp/ccp-dev.c:62:14: warning: symbol 'ccp_increment_unit_ordinal' was not declared. Should it be static? Signed-off-by:
Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by:
-
Corentin LABBE authored
Two crypto alg are badly indented, this patch fix this style issue. Signed-off-by:
LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by:
-
Corentin LABBE authored
The dev *ss is stored both in sun4i_tfm_ctx and sun4i_req_ctx. Since this pointer will never be changed during tfm life, it is better to remove it from sun4i_req_ctx. Signed-off-by:
-
Corentin LABBE authored
Two words are badly spelled, this patch respell them. Signed-off-by:
-
Corentin LABBE authored
The ss variable is never used, remove it. Signed-off-by:
-
Corentin LABBE authored
The update and final functions have lots of common action. This patch mix them in one function. This will give some improvements: - This will permit asynchronous support more easily - This will permit to use finup/digest functions with some performance improvements Signed-off-by:
-
Corentin LABBE authored
The variable i is always checked against unsigned value and cannot be negative. This patch set it as unsigned. Signed-off-by:
-
Corentin LABBE authored
The sentence 'Based on' is misspelled, respell it. Signed-off-by:
-
- 09 Aug, 2016 30 commits
-
-
Romain Perier authored
Don't use 64 'as is', as max block size in mv_cesa_ahash_cache_req. Use CESA_MAX_HASH_BLOCK_SIZE instead, this is better for readability. Signed-off-by:
Romain Perier <romain.perier@free-electrons.com> Signed-off-by:
-
Romain Perier authored
Currently, in mv_cesa_{md5,sha1,sha256}_init creq->state is initialized before the call to mv_cesa_ahash_init. This is wrong because this function fills creq with zero by using memset, so its 'state' that contains the default DIGEST is overwritten. This commit fixes the issue by initializing creq->state just after the call to mv_cesa_ahash_init. Fixes: commit b0ef5106 ("crypto: marvell/cesa - initialize hash...") Signed-off-by: -
Romain Perier authored
So far, sub part of mv_cesa_int was responsible of dequeuing complete requests, then call the 'cleanup' operation on these reqs and call the crypto api callback 'complete'. The problem is that the transformation context 'ctx' is retrieved only once before the while loop. Which means that the wrong 'cleanup' operation might be called on the wrong type of cesa requests, it can lead to memory corruptions with this message: marvell-cesa f1090000.crypto: dma_pool_free cesa_padding, 5a5a5a5a/5a5a5a5a (bad dma) This commit fixes the issue, by updating the transformation context for each dequeued cesa request. Fixes: commit 85030c51 ("crypto: marvell - Add support for chai...") Signed-off-by:
-
Thomas Petazzoni authored
The mv_cesa_ahash_cache_req() function always returns 0, which makes its return value pretty much useless. However, in addition to returning a useless value, it also returns a boolean in a variable passed by reference to indicate if the request was already cached. So, this commit changes mv_cesa_ahash_cache_req() to return this boolean. It consequently simplifies the only call site of mv_cesa_ahash_cache_req(), where the "ret" variable is no longer needed. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
Thomas Petazzoni authored
The mv_cesa_ahash_init() function always returns 0, and the return value is anyway never checked. Turn it into a function returning void. Signed-off-by:
-
Thomas Petazzoni authored
The dma_iter parameter of mv_cesa_ahash_dma_add_cache() is never used, so get rid of it. Signed-off-by:
-
Thomas Petazzoni authored
The mv_cesa_dma_add_op() function builds a mv_cesa_tdma_desc structure to copy the operation description to the SRAM, but doesn't explicitly initialize the destination of the copy. It works fine because the operatin description must be copied at the beginning of the SRAM, and the mv_cesa_tdma_desc structure is initialized to zero when allocated. However, it is somewhat confusing to not have a destination defined. Signed-off-by:
-
Russell King authored
While debugging setkey issues, the following warnings were found while trying to reinsert the caam module. Fix this by avoiding the duplicated cleanup in the probe path after caam_remove(), which has already cleaned up the resources. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2346 at /home/rmk/git/linux-rmk/mm/vmalloc.c:1490 __vunmap+0xcc/0xf4 Trying to vfree() nonexistent vm area (f2400000) Modules linked in: caam(+) cbc rfcomm bnep bluetooth nfsd em28xx_rc si2157 si2168 em28xx_dvb uvcvideo snd_soc_imx_sgtl5000 em28xx snd_soc_imx_spdif tveeprom snd_soc_fsl_asoc_card snd_soc_imx_audmux snd_soc_sgtl5000 imx_sdma imx2_wdt coda v4l2_mem2mem videobuf2_dma_contig snd_soc_fsl_ssi rc_cec snd_soc_fsl_spdif imx_pcm_dma videobuf2_vmalloc videobuf2_memops imx_thermal dw_hdmi_ahb_audio dw_hdmi_cec etnaviv fuse rc_pinnacle_pctv_hd [last unloaded: caam] CPU: 0 PID: 2346 Comm: modprobe Tainted: G W 4.8.0-rc1+ #2014 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c0013bb0>] (dump_backtrace) from [<c0013d4c>] (show_stack+0x18/0x1c) [<c0013d34>] (show_stack) from [<c0357c00>] (dump_stack+0xa4/0xdc) [<c0357b5c>] (dump_stack) from [<c002e650>] (__warn+0xdc/0x108) [<c002e574>] (__warn) from [<c002e734>] (warn_slowpath_fmt+0x40/0x48) [<c002e6f8>] (warn_slowpath_fmt) from [<c0151708>] (__vunmap+0xcc/0xf4) [<c015163c>] (__vunmap) from [<c015177c>] (vunmap+0x4c/0x54) [<c0151730>] (vunmap) from [<c001f48c>] (__iounmap+0x2c/0x30) [<c001f460>] (__iounmap) from [<c001f118>] (iounmap+0x1c/0x20) [<c001f0fc>] (iounmap) from [<bf247ae4>] (caam_probe+0x3dc/0x1498 [caam]) [<bf247708>] (caam_probe [caam]) from [<c042da8c>] (platform_drv_probe+0x58/0xb8) [<c042da34>] (platform_drv_probe) from [<c042bb4c>] (driver_probe_device+0x1fc/0x2b8) [<c042b950>] (driver_probe_device) from [<c042bcc4>] (__driver_attach+0xbc/0xc0) r10:00000000 r8:bf24b000 r7:00000000 r6:ef215844 r5:bf2490c4 r4:ef215810 [<c042bc08>] (__driver_attach) from [<c0429f14>] (bus_for_each_dev+0x5c/0x90) [<c0429eb8>] (bus_for_each_dev) from [<c042b358>] (driver_attach+0x24/0x28) [<c042b334>] (driver_attach) from [<c042b058>] (bus_add_driver+0xf4/0x200) [<c042af64>] (bus_add_driver) from [<c042cadc>] (driver_register+0x80/0xfc) [<c042ca5c>] (driver_register) from [<c042d960>] (__platform_driver_register+0x48/0x4c) [<c042d918>] (__platform_driver_register) from [<bf24b018>] (caam_driver_init+0x18/0x24 [caam]) [<bf24b000>] (caam_driver_init [caam]) from [<c00098ac>] (do_one_initcall+0x44/0x178) [<c0009868>] (do_one_initcall) from [<c010e034>] (do_init_module+0x68/0x1d8) [<c010dfcc>] (do_init_module) from [<c00c8fbc>] (load_module+0x1974/0x20b0) [<c00c7648>] (load_module) from [<c00c98d0>] (SyS_finit_module+0x94/0xa0) [<c00c983c>] (SyS_finit_module) from [<c000fda0>] (ret_fast_syscall+0x0/0x1c) ---[ end trace 34e3370d88bb1786 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2346 at /home/rmk/git/linux-rmk/drivers/clk/clk.c:594 clk_core_disable+0xe4/0x26c Modules linked in: caam(+) cbc rfcomm bnep bluetooth nfsd em28xx_rc si2157 si2168 em28xx_dvb uvcvideo snd_soc_imx_sgtl5000 em28xx snd_soc_imx_spdif tveeprom snd_soc_fsl_asoc_card snd_soc_imx_audmux snd_soc_sgtl5000 imx_sdma imx2_wdt coda v4l2_mem2mem videobuf2_dma_contig snd_soc_fsl_ssi rc_cec snd_soc_fsl_spdif imx_pcm_dma videobuf2_vmalloc videobuf2_memops imx_thermal dw_hdmi_ahb_audio dw_hdmi_cec etnaviv fuse rc_pinnacle_pctv_hd [last unloaded: caam] CPU: 0 PID: 2346 Comm: modprobe Tainted: G W 4.8.0-rc1+ #2014 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c0013bb0>] (dump_backtrace) from [<c0013d4c>] (show_stack+0x18/0x1c) [<c0013d34>] (show_stack) from [<c0357c00>] (dump_stack+0xa4/0xdc) [<c0357b5c>] (dump_stack) from [<c002e650>] (__warn+0xdc/0x108) [<c002e574>] (__warn) from [<c002e6a4>] (warn_slowpath_null+0x28/0x30) [<c002e67c>] (warn_slowpath_null) from [<c05b113c>] (clk_core_disable+0xe4/0x26c) [<c05b1058>] (clk_core_disable) from [<c05b2e3c>] (clk_core_disable_lock+0x20/0x2c) [<c05b2e1c>] (clk_core_disable_lock) from [<c05b2e6c>] (clk_disable+0x24/0x28) [<c05b2e48>] (clk_disable) from [<bf247b04>] (caam_probe+0x3fc/0x1498 [caam]) [<bf247708>] (caam_probe [caam]) from [<c042da8c>] (platform_drv_probe+0x58/0xb8) [<c042da34>] (platform_drv_probe) from [<c042bb4c>] (driver_probe_device+0x1fc/0x2b8) [<c042b950>] (driver_probe_device) from [<c042bcc4>] (__driver_attach+0xbc/0xc0) r10:00000000 r8:bf24b000 r7:00000000 r6:ef215844 r5:bf2490c4 r4:ef215810 [<c042bc08>] (__driver_attach) from [<c0429f14>] (bus_for_each_dev+0x5c/0x90) [<c0429eb8>] (bus_for_each_dev) from [<c042b358>] (driver_attach+0x24/0x28) [<c042b334>] (driver_attach) from [<c042b058>] (bus_add_driver+0xf4/0x200) [<c042af64>] (bus_add_driver) from [<c042cadc>] (driver_register+0x80/0xfc) [<c042ca5c>] (driver_register) from [<c042d960>] (__platform_driver_register+0x48/0x4c) [<c042d918>] (__platform_driver_register) from [<bf24b018>] (caam_driver_init+0x18/0x24 [caam]) [<bf24b000>] (caam_driver_init [caam]) from [<c00098ac>] (do_one_initcall+0x44/0x178) [<c0009868>] (do_one_initcall) from [<c010e034>] (do_init_module+0x68/0x1d8) [<c010dfcc>] (do_init_module) from [<c00c8fbc>] (load_module+0x1974/0x20b0) [<c00c7648>] (load_module) from [<c00c98d0>] (SyS_finit_module+0x94/0xa0) [<c00c983c>] (SyS_finit_module) from [<c000fda0>] (ret_fast_syscall+0x0/0x1c) ---[ end trace 34e3370d88bb1787 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2346 at /home/rmk/git/linux-rmk/drivers/clk/clk.c:476 clk_core_unprepare+0x204/0x388 Modules linked in: caam(+) cbc rfcomm bnep bluetooth nfsd em28xx_rc si2157 si2168 em28xx_dvb uvcvideo snd_soc_imx_sgtl5000 em28xx snd_soc_imx_spdif tveeprom snd_soc_fsl_asoc_card snd_soc_imx_audmux snd_soc_sgtl5000 imx_sdma imx2_wdt coda v4l2_mem2mem videobuf2_dma_contig snd_soc_fsl_ssi rc_cec snd_soc_fsl_spdif imx_pcm_dma videobuf2_vmalloc videobuf2_memops imx_thermal dw_hdmi_ahb_audio dw_hdmi_cec etnaviv fuse rc_pinnacle_pctv_hd [last unloaded: caam] CPU: 0 PID: 2346 Comm: modprobe Tainted: G W 4.8.0-rc1+ #2014 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c0013bb0>] (dump_backtrace) from [<c0013d4c>] (show_stack+0x18/0x1c) [<c0013d34>] (show_stack) from [<c0357c00>] (dump_stack+0xa4/0xdc) [<c0357b5c>] (dump_stack) from [<c002e650>] (__warn+0xdc/0x108) [<c002e574>] (__warn) from [<c002e6a4>] (warn_slowpath_null+0x28/0x30) [<c002e67c>] (warn_slowpath_null) from [<c05b0834>] (clk_core_unprepare+0x204/0x388) [<c05b0630>] (clk_core_unprepare) from [<c05b4c0c>] (clk_unprepare+0x2c/0x34) [<c05b4be0>] (clk_unprepare) from [<bf247b0c>] (caam_probe+0x404/0x1498 [caam]) [<bf247708>] (caam_probe [caam]) from [<c042da8c>] (platform_drv_probe+0x58/0xb8) [<c042da34>] (platform_drv_probe) from [<c042bb4c>] (driver_probe_device+0x1fc/0x2b8) [<c042b950>] (driver_probe_device) from [<c042bcc4>] (__driver_attach+0xbc/0xc0) r10:00000000 r8:bf24b000 r7:00000000 r6:ef215844 r5:bf2490c4 r4:ef215810 [<c042bc08>] (__driver_attach) from [<c0429f14>] (bus_for_each_dev+0x5c/0x90) [<c0429eb8>] (bus_for_each_dev) from [<c042b358>] (driver_attach+0x24/0x28) [<c042b334>] (driver_attach) from [<c042b058>] (bus_add_driver+0xf4/0x200) [<c042af64>] (bus_add_driver) from [<c042cadc>] (driver_register+0x80/0xfc) [<c042ca5c>] (driver_register) from [<c042d960>] (__platform_driver_register+0x48/0x4c) [<c042d918>] (__platform_driver_register) from [<bf24b018>] (caam_driver_init+0x18/0x24 [caam]) [<bf24b000>] (caam_driver_init [caam]) from [<c00098ac>] (do_one_initcall+0x44/0x178) [<c0009868>] (do_one_initcall) from [<c010e034>] (do_init_module+0x68/0x1d8) [<c010dfcc>] (do_init_module) from [<c00c8fbc>] (load_module+0x1974/0x20b0) [<c00c7648>] (load_module) from [<c00c98d0>] (SyS_finit_module+0x94/0xa0) [<c00c983c>] (SyS_finit_module) from [<c000fda0>] (ret_fast_syscall+0x0/0x1c) ---[ end trace 34e3370d88bb1788 ]--- Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Russell King authored
Threaded interrupts can perform the function of the tasklet, and much more safely too - without races when trying to take the tasklet and interrupt down on device removal. With the old code, there is a window where we call tasklet_kill(). If the interrupt handler happens to be running on a different CPU, and subsequently calls tasklet_schedule(), the tasklet will be re-scheduled for execution. Switching to a hardirq/threadirq combination implementation avoids this, and it also means generic code deals with the teardown sequencing of the threaded and non-threaded parts. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Russell King authored
Add a helper to map the source scatterlist into the descriptor. Signed-off-by:
-
Russell King authored
Signed-off-by:
-
Russell King authored
Add a helper function to perform the descriptor allocation. Signed-off-by:
-
Russell King authored
Strictly, dma_map_sg() may coalesce SG entries, but in practise on iMX hardware, this will never happen. However, dma_map_sg() can fail, and we completely fail to check its return value. So, fix this properly. Arrange the code to map the scatterlist early, so we know how many scatter table entries to allocate, and then fill them in. This allows us to keep relatively simple error cleanup paths. Signed-off-by:
-
Russell King authored
Ensure that we clean up allocations and DMA mappings after encountering an error rather than just giving up and leaking memory and resources. Signed-off-by:
-
Russell King authored
Since the extended descriptor includes the hardware descriptor, and the sec4 scatterlist immediately follows this, we can declare it as a array at the very end of the extended descriptor. This allows us to get rid of an initialiser for every site where we allocate an extended descriptor. Signed-off-by:
-
Russell King authored
Mark the hardware descriptor as being cache line aligned; on DMA incoherent architectures, the hardware descriptor should sit in a separate cache line from the CPU accessed data to avoid polluting the caches. Signed-off-by:
-
Russell King authored
Rather than giving the descriptor as hw_desc[0], give it's real size. All places where we allocate an ahash_edesc incorporate DESC_JOB_IO_LEN bytes of job descriptor. Signed-off-by:
-
Russell King authored
Signed-off-by:
-
Russell King authored
caamhash contains this weird code: src_nents = sg_count(req->src, req->nbytes); dma_map_sg(jrdev, req->src, src_nents ? : 1, DMA_TO_DEVICE); ... edesc->src_nents = src_nents; sg_count() returns zero when sg_nents_for_len() returns zero or one. This means we don't need to use a hardware scatterlist. However, setting src_nents to zero causes problems when we unmap: if (edesc->src_nents) dma_unmap_sg_chained(dev, req->src, edesc->src_nents, DMA_TO_DEVICE, edesc->chained); as zero here means that we have no entries to unmap. This causes us to leak DMA mappings, where we map one scatterlist entry and then fail to unmap it. This can be fixed in two ways: either by writing the number of entries that were requested of dma_map_sg(), or by reworking the "no SG required" case. We adopt the re-work solution here - we replace sg_count() with sg_nents_for_len(), so src_nents now contains the real number of scatterlist entries, and we then change the test for using the hardware scatterlist to src_nents > 1 rather than just non-zero. This change passes my sshd, openssl tests hashing /bin and tcrypt tests. Signed-off-by:
-
Will Thomas authored
Properly allocate enough memory to respect the fallback. Signed-off-by:
Will Thomas <will.thomas@imgtec.com> Signed-off-by:
-
James Hartley authored
Currently the probe function only emits an output on success when debug is specifically enabled. It would be more useful if this happens by default. Signed-off-by:
James Hartley <james.hartley@imgtec.com> Reviewed-by:
-
James Hartley authored
Currently the img-hash accelerator does not probe successfully due to a change in the checks made during registration with the crypto framework. This is due to import and export functions not being defined. Correct this. Signed-off-by:
-
Govindraj Raja authored
Current img hash claims sys and periph gate clocks and this can be gated in system suspend scenarios. Add support for Device pm ops for img hash to gate the clocks claimed by img hash. Signed-off-by:
Govindraj Raja <Govindraj.Raja@imgtec.com> Reviewed-by:
-
Will Thomas authored
Burst length of 16 drives the hash accelerator out of spec and causes stability issues in some cases. Reduce this to stop data being lost. Signed-off-by:
-
Will Thomas authored
Move 0 length buffer to end of structure to stop overwriting fallback request data. This doesn't cause a bug itself as the buffer is never used alongside the fallback but should be changed. Signed-off-by:
-
Will Thomas authored
Sporadic null pointer exceptions came from here. Fix them. Signed-off-by:
-
Yanjiang Jin authored
"if (!ret == template[i].fail)" is confusing to compilers (gcc5): crypto/testmgr.c: In function '__test_aead': crypto/testmgr.c:531:12: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] if (!ret == template[i].fail) { ^ Let there be 'if (template[i].fail == !ret) '. Signed-off-by:Yanjiang Jin <yanjiang.jin@windriver.com> Signed-off-by:
-
Gary R Hook authored
A second CCP is available, identical to the first, with its ownn PCI ID. Make it available for use by the crypto subsystem, as well as for DMA activity and random number generation. This device is not pre-configured at at boot time. The driver must configure it (during the probe) for use. Signed-off-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
-
Gary R Hook authored
Every CCP is capable of providing general DMA services. Register the device as a provider. Signed-off-by:
-
Gary R Hook authored
Signed-off-by:
-
