- 15 Jun, 2020 40 commits
-
-
Mark Brown authored
Merge series "ASoC: Intel: Add KeemBay ASoC platform driver" from Sia Jee Heng <jee.heng.sia@intel.com>: The below series of patches support the KeemBay ASoC platform driver. The platform driver initialize the i2s to capture and playback the pcm data on the ARM. The i2s is running in polling mode. There is no DSP in the KeemBay SoC. Users are rely on the Gstreamer plugin to perform Audio preprocessing. Audio graph card is used to connect the platform driver with the tlv320aic3204 codec. Change History: v5: - Remove OF dependency from Kconfig as OF is shifted to audio graph card. v4: - Reduce if-otology at the tx/rx function. - Fix indentation. - specify .rate directly v3: - Adjusted header format. - Use Audio graph card instead of custom sound card. - Use if-else instead of conditional operator. - Enabled .set_fmt to configure master clock. v2: - Corrected I2S naming for DT binding. v1: - Initial version. Sia Jee Heng (3): ASoC: Intel: Add KeemBay platform driver ASoC: Intel: Add makefiles and kconfig changes for KeemBay dt-bindings: sound: Add documentation for KeemBay i2s .../bindings/sound/intel,keembay-i2s.yaml | 68 +++ sound/soc/intel/Kconfig | 7 + sound/soc/intel/Makefile | 1 + sound/soc/intel/keembay/Makefile | 4 + sound/soc/intel/keembay/kmb_platform.c | 654 +++++++++++++++++++++ sound/soc/intel/keembay/kmb_platform.h | 145 +++++ 6 files changed, 879 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml create mode 100644 sound/soc/intel/keembay/Makefile create mode 100644 sound/soc/intel/keembay/kmb_platform.c create mode 100644 sound/soc/intel/keembay/kmb_platform.h -- 1.9.1
-
Mark Brown authored
Merge series "ASoC: improve core dmesg logs and verbosity" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Try to both reduce useless verbosity and keep useful error reports. Pierre-Louis Bossart (3): ASoC: soc-core: reduce verbosity of BE override message ASoC: soc-pcm: improve error messages in soc_pcm_new() ASoC: soc-pcm/compress: reduce verbosity on mapping ok messages sound/soc/soc-compress.c | 4 ++-- sound/soc/soc-core.c | 4 ++-- sound/soc/soc-pcm.c | 13 +++++++------ 3 files changed, 11 insertions(+), 10 deletions(-) -- 2.20.1
-
Mark Brown authored
Commit 1a0f2433 ("ASoC: max98357a: Add ACPI HID MAX98360A") supports MAX98360A in ACPI world. This series supports MAX98360A in OF world. Tzung-Bi Shih (2): ASoC: max98357a: add compatible string for MAX98360A ASoC: dt-bindings: add compatible string for MAX98360A .../devicetree/bindings/sound/max98357a.txt | 12 +++++++++--- sound/soc/codecs/max98357a.c | 1 + 2 files changed, 10 insertions(+), 3 deletions(-) -- 2.27.0.278.ge193c7cf3a9-goog
-
Mark Brown authored
Merge series "ASoC: mediatek: mt6358: support DMIC one-wire mode" from Jiaxin Yu <jiaxin.yu@mediatek.com>: v2 changes: 1. Uses a DT property to select DMIC mode instead of a mixer control. v1 changes: 1. Uses a mixer control to select DMIC mode. 2. patchwork list: https://patchwork.kernel.org/patch/11578309 Jiaxin Yu (2): ASoC: mediatek: mt6358: support DMIC one-wire mode ASoC: dt-bindings: mediatek: mt6358: add dmic-mode property Documentation/devicetree/bindings/sound/mt6358.txt | 6 ++++++ sound/soc/codecs/mt6358.c | 23 +++++++++++++++++++++- 2 files changed, 28 insertions(+), 1 deletion(-) -- 1.8.1.1.dirty _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
-
Mark Brown authored
Merge series "ASoC: soc-component: collect component functions" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark We have soc-component.c now, but still many component related functions are implemented many place. This patch-set collect these into soc-component.c. v1 -> v2 - remove soc-compress.c exchange (But I have plan to repost it) - fixup loop break issue on some functions - direct return on some functions Link: https://lore.kernel.org/r/87a71nzhy2.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (12): ASoC: soc-component: add soc_component_pin() and share code ASoC: soc-component: move snd_soc_component_xxx_regmap() to soc-component ASoC: soc-component: move snd_soc_component_initialize() to soc-component.c ASoC: soc-component: add soc_component_err() ASoC: soc-component: add snd_soc_pcm_component_prepare() ASoC: soc-component: add snd_soc_pcm_component_hw_params() ASoC: soc-component: add snd_soc_pcm_component_hw_free() ASoC: soc-component: add snd_soc_pcm_component_trigger() ASoC: soc-component: add snd_soc_component_init() ASoC: soc-component: merge soc-io.c into soc-component.c ASoC: soc-component: merge soc_pcm_trigger_start/stop() ASoC: soc-component: tidyup Copyright include/sound/soc-component.h | 29 +- sound/soc/Makefile | 2 +- sound/soc/soc-component.c | 666 ++++++++++++++++++++++++---------- sound/soc/soc-core.c | 102 +----- sound/soc/soc-io.c | 202 ----------- sound/soc/soc-pcm.c | 114 ++---- 6 files changed, 531 insertions(+), 584 deletions(-) delete mode 100644 sound/soc/soc-io.c -- 2.17.1
-
Akshu Agrawal authored
Having mixer control to switch between DMICs prevents user to initiate capture simultaneously on both the DMIcs. Earlier 2 separate devices, one for each DMIC, gave an option of using them simultaneously, which is not supported. Signed-off-by:
Akshu Agrawal <akshu.agrawal@amd.com> Link: https://lore.kernel.org/r/20200530095519.24324-1-akshu.agrawal@amd.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Steve Lee authored
Add amp common init function to gather common init setting and finaize. - add max98390_init_regs func - move amp setting to max98390_init_regs func. - removed unneceary setting and finalize common register values. Signed-off-by:
Steve Lee <steves.lee@maximintegrated.com> Link: https://lore.kernel.org/r/20200611094718.18371-1-steves.lee@maximintegrated.comSigned-off-by:
-
Steve Lee authored
Add DT binding of max98390 amplifier driver. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200602084337.22116-1-steves.lee@maximintegrated.comSigned-off-by:
-
derek.fang authored
DAI Wclk of rt5682 only supports 48000Hz output so far, this patch lets it support 44100Hz. Signed-off-by:
derek.fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/1591938925-1070-4-git-send-email-derek.fang@realtek.comSigned-off-by:
-
derek.fang authored
PLL2 of rt5682 only supports the freq conversion for 48000Hz sample rate so far, this patch lets it support 44100Hz. Signed-off-by:
-
derek.fang authored
Add pll preset maps for Realtek codecs' PLL2 freq conversions. Signed-off-by:
-
Qiushi Wu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code, causing incorrect ref count if pm_runtime_put_noidle() is not called in error handling paths. Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails. Signed-off-by:
Qiushi Wu <wu000273@umn.edu> Link: https://lore.kernel.org/r/20200614033344.1814-1-wu000273@umn.eduSigned-off-by:
-
Qiushi Wu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code, causing incorrect ref count if pm_runtime_put_noidle() is not called in error handling paths. Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails. Signed-off-by:
-
Shengjiu Wang authored
Add two platform variables for headphone jack detection. "hp_cfg" is for configuration of heaphone jack detection. "gpio_cfg" is for configuration of gpio, the gpio is used for plug & unplug interrupt on SoC. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1591180013-12416-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Shengjiu Wang authored
Add two properties for headphone detection. wlf,hp-cfg: A list of headphone jack detect configuration register values wlf,gpio-cfg: A list of GPIO configuration register values Signed-off-by:
-
Jonathan Bakker authored
The audio system on S5PV210 Aries boards have a wm8994 codec connected to the Samsung I2S0 DAI. Jack detection is done via GPIOs, an ADC, and an extcon device (fsa9480). There are two main variants, one with an FM radio and where the wm8994 is the master for the modem audio and the other without FM and the modem is the master. Signed-off-by:
Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/BN6PR04MB0660866A9B5FD4B9E74D7C31A39F0@BN6PR04MB0660.namprd04.prod.outlook.comSigned-off-by:
-
Jonathan Bakker authored
The wm8994 exposes several inputs and outputs that can be used by machine drivers in their routing. Add them to the documention so they don't have been duplicated in any machine drivers bindings. Signed-off-by:
-
Jonathan Bakker authored
Samsung Aries boards have a WM8994 codec connected to the Samsung I2S controller, the BT codec, and the cellular modem. Jack detection is done by a combination of an ADC, GPIOs, and an extcon device for the USB dock. There is also a GPIO for selection between the Mic path and the TV out path on the headphone jack. There are two main variants, one with an FM radio and where the modem is the master and one without a radio and the modem is the slave. Signed-off-by:
-
Fuqian Huang authored
kmemdup is introduced to duplicate a region of memory in a neat way. Rather than kmalloc/kzalloc + memcpy, which the programmer needs to write the size twice (sometimes lead to mistakes), kmemdup improves readability, leads to smaller code and also reduce the chances of mistakes. Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy. Signed-off-by:
Fuqian Huang <huangfq.daxian@gmail.com> Acked-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20190703163224.1029-1-huangfq.daxian@gmail.comSigned-off-by:
-
Sia Jee Heng authored
Document Intel KeemBay i2s DT bindings. Signed-off-by:
Sia Jee Heng <jee.heng.sia@intel.com> Link: https://lore.kernel.org/r/1591682783-1923-4-git-send-email-jee.heng.sia@intel.comSigned-off-by:
-
Sia Jee Heng authored
Add makefile and kconfig changes for Intel KeemBay platform driver. Signed-off-by:
Michael Sit Wei Hong <michael.wei.hong.sit@intel.com> Signed-off-by:
-
Sia Jee Heng authored
Add KeemBay ASoC platform driver which initialize the i2s controller and uses i2s to capture and transmit pcm data to external codec. The i2s is running in polling mode. Signed-off-by:
-
Jiaxin Yu authored
Adds dmic-mode property and updates example. Signed-off-by:
Jiaxin Yu <jiaxin.yu@mediatek.com> Link: https://lore.kernel.org/r/1591353222-18576-3-git-send-email-jiaxin.yu@mediatek.comSigned-off-by:
-
Jiaxin Yu authored
Supports DMIC one-wire mode. Uses a DT property "dmic-mode" to select. Signed-off-by:
-
Kuninori Morimoto authored
This patch add missing company copyright Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/87eeqvw8w8.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Now, soc_pcm_trigger_start/stop() are simple enough. Let's merge these into soc_pcm_trigger(). Signed-off-by:
-
Kuninori Morimoto authored
soc-io.c has snd_soc_component_xxx() functions for I/O. We have soc-componennt.c for it. Let's merge soc-io.c into soc-component.c By this patch, original soc-io.c functions start to use soc_component_err() when error case. Signed-off-by:
-
Kuninori Morimoto authored
we wantn't to directly access to component related parameter as much as possible to keep encapsulation. This patch adds snd_soc_component_init() for it. Signed-off-by:
-
Kuninori Morimoto authored
We have 2 type of component functions snd_soc_component_xxx() is focusing to component itself, snd_soc_pcm_component_xxx() is focusing to rtd related component. Now we can update snd_soc_component_trigger() to snd_soc_pcm_component_trigger(). This patch do it. Signed-off-by:
-
Kuninori Morimoto authored
We have 2 type of component functions snd_soc_component_xxx() is focusing to component itself, snd_soc_pcm_component_xxx() is focusing to rtd related component. Now we can update snd_soc_component_hw_free() to snd_soc_pcm_component_hw_free(). This patch do it. Signed-off-by:
-
Kuninori Morimoto authored
We have 2 type of component functions snd_soc_component_xxx() is focusing to component itself, snd_soc_pcm_component_xxx() is focusing to rtd related component. Now we can update snd_soc_component_hw_params() to snd_soc_pcm_component_hw_params(). This patch do it. Signed-off-by:
-
Kuninori Morimoto authored
We have 2 type of component functions snd_soc_component_xxx() is focusing to component itself, snd_soc_pcm_component_xxx() is focusing to rtd related component. Now we can update snd_soc_component_prepare() to snd_soc_pcm_component_prepare(). This patch do it. Signed-off-by:
-
Kuninori Morimoto authored
At soc-component.c, it is good idea to indicate error function and its component name if there was error. This patch adds soc_component_err() for it. Signed-off-by:
-
Kuninori Morimoto authored
snd_soc_component_xxx() should be implemented at soc-component.c Signed-off-by:
-
Kuninori Morimoto authored
soc-component is handling snd_soc_component_xxx(). Move snd_soc_component_xxx_regmap() to it. Signed-off-by:
-
Kuninori Morimoto authored
soc-component has too many snd_soc_component_xxx_pin_xxx() functions. The difference between these functions are used function name and enable/disable. This patch adds common soc_component_pin() and share code. Signed-off-by:
-
Pierre-Louis Bossart authored
With dynamic debug not enabled, we still get these messages: [ 48.133586] sof_sdw sof_sdw: rt711-aif1 <-> SDW0 Pin2 mapping ok [ 48.133595] sof_sdw sof_sdw: rt711-aif1 <-> SDW0 Pin3 mapping ok [ 48.133650] sof_sdw sof_sdw: sdw:1:25d:1308:0 <-> SDW1 Pin2 mapping ok [ 48.133658] sof_sdw sof_sdw: rt715-aif2 <-> SDW3 Pin2 mapping ok [ 48.133666] sof_sdw sof_sdw: intel-hdmi-hifi1 <-> iDisp1 Pin mapping ok [ 48.133672] sof_sdw sof_sdw: intel-hdmi-hifi2 <-> iDisp2 Pin mapping ok [ 48.133677] sof_sdw sof_sdw: intel-hdmi-hifi3 <-> iDisp3 Pin mapping ok [ 48.133712] sof_sdw sof_sdw: snd-soc-dummy-dai <-> Headphone 0 mapping ok [ 48.133733] sof_sdw sof_sdw: snd-soc-dummy-dai <-> Headset mic 1 mapping ok [ 48.133746] sof_sdw sof_sdw: snd-soc-dummy-dai <-> SDW1-speakers 2 mapping ok [ 48.133762] sof_sdw sof_sdw: snd-soc-dummy-dai <-> Microphones 4 mapping ok [ 48.133774] sof_sdw sof_sdw: snd-soc-dummy-dai <-> HDMI1 5 mapping ok [ 48.133798] sof_sdw sof_sdw: snd-soc-dummy-dai <-> HDMI2 6 mapping ok [ 48.133809] sof_sdw sof_sdw: snd-soc-dummy-dai <-> HDMI3 7 mapping ok This is not really useful for most users, demote to dev_dbg() Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200612204050.25901-4-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
Provide an explicit dmesg trace with the PCM 'new_name', dailink name and error code to help with debug. Signed-off-by:
-
Pierre-Louis Bossart authored
With dynamic debug not enabled, we still see this sort of messages: [ 47.656671] sof_sdw sof_sdw: info: override BE DAI link SDW0-Playback [ 47.656677] sof_sdw sof_sdw: info: override BE DAI link SDW0-Capture [ 47.656682] sof_sdw sof_sdw: info: override BE DAI link SDW1-Playback [ 47.656686] sof_sdw sof_sdw: info: override BE DAI link SDW3-Capture [ 47.656691] sof_sdw sof_sdw: info: override BE DAI link iDisp1 [ 47.656695] sof_sdw sof_sdw: info: override BE DAI link iDisp2 [ 47.656699] sof_sdw sof_sdw: info: override BE DAI link iDisp3 This is not really helpful for most users, move to dev_dbg. Signed-off-by:
-
Tzung-Bi Shih authored
Maxim MAX98360A audio amplifier is functionally identical to MAX98357A. Adds compatible string "maxim,max98360a" for driver reuse. Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200605034931.107713-3-tzungbi@google.comSigned-off-by:
-
