- 22 Apr, 2020 33 commits
-
-
Lyude Paul authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 9765635b upstream. This reverts commit: c54c7374 ("drm/dp_mst: Skip validating ports during destruction, just ref") ugh. In drm_dp_destroy_connector_work(), we have a pretty good chance of freeing the actual struct drm_dp_mst_port. However, after destroying things we send a hotplug through (*mgr->cbs->hotplug)(mgr) which is where the problems start. For i915, this calls all the way down to the fbcon probing helpers, which start trying to access the port in a modeset. [ 45.062001] ================================================================== [ 45.062112] BUG: KASAN: use-after-free in ex_handler_refcount+0x146/0x180 [ 45.062196] Write of size 4 at addr ffff8882b4b70968 by task kworker/3:1/53 [ 45.062325] CPU: 3 PID: 53 Comm: kworker/3:1 Kdump: loaded Tainted: G O 4.20.0-rc4Lyude-Test+ #3 [ 45.062442] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018 [ 45.062554] Workqueue: events drm_dp_destroy_connector_work [drm_kms_helper] [ 45.062641] Call Trace: [ 45.062685] dump_stack+0xbd/0x15a [ 45.062735] ? dump_stack_print_info.cold.0+0x1b/0x1b [ 45.062801] ? printk+0x9f/0xc5 [ 45.062847] ? kmsg_dump_rewind_nolock+0xe4/0xe4 [ 45.062909] ? ex_handler_refcount+0x146/0x180 [ 45.062970] print_address_description+0x71/0x239 [ 45.063036] ? ex_handler_refcount+0x146/0x180 [ 45.063095] kasan_report.cold.5+0x242/0x30b [ 45.063155] __asan_report_store4_noabort+0x1c/0x20 [ 45.063313] ex_handler_refcount+0x146/0x180 [ 45.063371] ? ex_handler_clear_fs+0xb0/0xb0 [ 45.063428] fixup_exception+0x98/0xd7 [ 45.063484] ? raw_notifier_call_chain+0x20/0x20 [ 45.063548] do_trap+0x6d/0x210 [ 45.063605] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper] [ 45.063732] do_error_trap+0xc0/0x170 [ 45.063802] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper] [ 45.063929] do_invalid_op+0x3b/0x50 [ 45.063997] ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper] [ 45.064103] invalid_op+0x14/0x20 [ 45.064162] RIP: 0010:_GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper] [ 45.064274] Code: 00 48 c7 c7 80 fe 53 a0 48 89 e5 e8 5b 6f 26 e1 5d c3 48 8d 0e 0f 0b 48 8d 0b 0f 0b 48 8d 0f 0f 0b 48 8d 0f 0f 0b 49 8d 4d 00 <0f> 0b 49 8d 0e 0f 0b 48 8d 08 0f 0b 49 8d 4d 00 0f 0b 48 8d 0b 0f [ 45.064569] RSP: 0018:ffff8882b789ee10 EFLAGS: 00010282 [ 45.064637] RAX: ffff8882af47ae70 RBX: ffff8882af47aa60 RCX: ffff8882b4b70968 [ 45.064723] RDX: ffff8882af47ae70 RSI: 0000000000000008 RDI: ffff8882b788bdb8 [ 45.064808] RBP: ffff8882b789ee28 R08: ffffed1056f13db4 R09: ffffed1056f13db3 [ 45.064894] R10: ffffed1056f13db3 R11: ffff8882b789ed9f R12: ffff8882af47ad28 [ 45.064980] R13: ffff8882b4b70968 R14: ffff8882acd86728 R15: ffff8882b4b75dc8 [ 45.065084] drm_dp_mst_reset_vcpi_slots+0x12/0x80 [drm_kms_helper] [ 45.065225] intel_mst_disable_dp+0xda/0x180 [i915] [ 45.065361] intel_encoders_disable.isra.107+0x197/0x310 [i915] [ 45.065498] haswell_crtc_disable+0xbe/0x400 [i915] [ 45.065622] ? i9xx_disable_plane+0x1c0/0x3e0 [i915] [ 45.065750] intel_atomic_commit_tail+0x74e/0x3e60 [i915] [ 45.065884] ? intel_pre_plane_update+0xbc0/0xbc0 [i915] [ 45.065968] ? drm_atomic_helper_swap_state+0x88b/0x1d90 [drm_kms_helper] [ 45.066054] ? kasan_check_write+0x14/0x20 [ 45.066165] ? i915_gem_track_fb+0x13a/0x330 [i915] [ 45.066277] ? i915_sw_fence_complete+0xe9/0x140 [i915] [ 45.066406] ? __i915_sw_fence_complete+0xc50/0xc50 [i915] [ 45.066540] intel_atomic_commit+0x72e/0xef0 [i915] [ 45.066635] ? drm_dev_dbg+0x200/0x200 [drm] [ 45.066764] ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915] [ 45.066898] ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915] [ 45.067001] drm_atomic_commit+0xc4/0xf0 [drm] [ 45.067074] restore_fbdev_mode_atomic+0x562/0x780 [drm_kms_helper] [ 45.067166] ? drm_fb_helper_debug_leave+0x690/0x690 [drm_kms_helper] [ 45.067249] ? kasan_check_read+0x11/0x20 [ 45.067324] restore_fbdev_mode+0x127/0x4b0 [drm_kms_helper] [ 45.067364] ? kasan_check_read+0x11/0x20 [ 45.067406] drm_fb_helper_restore_fbdev_mode_unlocked+0x164/0x200 [drm_kms_helper] [ 45.067462] ? drm_fb_helper_hotplug_event+0x30/0x30 [drm_kms_helper] [ 45.067508] ? kasan_check_write+0x14/0x20 [ 45.070360] ? mutex_unlock+0x22/0x40 [ 45.073748] drm_fb_helper_set_par+0xb2/0xf0 [drm_kms_helper] [ 45.075846] drm_fb_helper_hotplug_event.part.33+0x1cd/0x290 [drm_kms_helper] [ 45.078088] drm_fb_helper_hotplug_event+0x1c/0x30 [drm_kms_helper] [ 45.082614] intel_fbdev_output_poll_changed+0x9f/0x140 [i915] [ 45.087069] drm_kms_helper_hotplug_event+0x67/0x90 [drm_kms_helper] [ 45.089319] intel_dp_mst_hotplug+0x37/0x50 [i915] [ 45.091496] drm_dp_destroy_connector_work+0x510/0x6f0 [drm_kms_helper] [ 45.093675] ? drm_dp_update_payload_part1+0x1220/0x1220 [drm_kms_helper] [ 45.095851] ? kasan_check_write+0x14/0x20 [ 45.098473] ? kasan_check_read+0x11/0x20 [ 45.101155] ? strscpy+0x17c/0x530 [ 45.103808] ? __switch_to_asm+0x34/0x70 [ 45.106456] ? syscall_return_via_sysret+0xf/0x7f [ 45.109711] ? read_word_at_a_time+0x20/0x20 [ 45.113138] ? __switch_to_asm+0x40/0x70 [ 45.116529] ? __switch_to_asm+0x34/0x70 [ 45.119891] ? __switch_to_asm+0x40/0x70 [ 45.123224] ? __switch_to_asm+0x34/0x70 [ 45.126540] ? __switch_to_asm+0x34/0x70 [ 45.129824] process_one_work+0x88d/0x15d0 [ 45.133172] ? pool_mayday_timeout+0x850/0x850 [ 45.136459] ? pci_mmcfg_check_reserved+0x110/0x128 [ 45.139739] ? wake_q_add+0xb0/0xb0 [ 45.143010] ? check_preempt_wakeup+0x652/0x1050 [ 45.146304] ? worker_enter_idle+0x29e/0x740 [ 45.149589] ? __schedule+0x1ec0/0x1ec0 [ 45.152937] ? kasan_check_read+0x11/0x20 [ 45.156179] ? _raw_spin_lock_irq+0xa3/0x130 [ 45.159382] ? _raw_read_unlock_irqrestore+0x30/0x30 [ 45.162542] ? kasan_check_write+0x14/0x20 [ 45.165657] worker_thread+0x1a5/0x1470 [ 45.168725] ? set_load_weight+0x2e0/0x2e0 [ 45.171755] ? process_one_work+0x15d0/0x15d0 [ 45.174806] ? __switch_to_asm+0x34/0x70 [ 45.177645] ? __switch_to_asm+0x40/0x70 [ 45.180323] ? __switch_to_asm+0x34/0x70 [ 45.182936] ? __switch_to_asm+0x40/0x70 [ 45.185539] ? __switch_to_asm+0x34/0x70 [ 45.188100] ? __switch_to_asm+0x40/0x70 [ 45.190628] ? __schedule+0x7d4/0x1ec0 [ 45.193143] ? save_stack+0xa9/0xd0 [ 45.195632] ? kasan_check_write+0x10/0x20 [ 45.198162] ? kasan_kmalloc+0xc4/0xe0 [ 45.200609] ? kmem_cache_alloc_trace+0xdd/0x190 [ 45.203046] ? kthread+0x9f/0x3b0 [ 45.205470] ? ret_from_fork+0x35/0x40 [ 45.207876] ? unwind_next_frame+0x43/0x50 [ 45.210273] ? __save_stack_trace+0x82/0x100 [ 45.212658] ? deactivate_slab.isra.67+0x3d4/0x580 [ 45.215026] ? default_wake_function+0x35/0x50 [ 45.217399] ? kasan_check_read+0x11/0x20 [ 45.219825] ? _raw_spin_lock_irqsave+0xae/0x140 [ 45.222174] ? __lock_text_start+0x8/0x8 [ 45.224521] ? replenish_dl_entity.cold.62+0x4f/0x4f [ 45.226868] ? __kthread_parkme+0x87/0xf0 [ 45.229200] kthread+0x2f7/0x3b0 [ 45.231557] ? process_one_work+0x15d0/0x15d0 [ 45.233923] ? kthread_park+0x120/0x120 [ 45.236249] ret_from_fork+0x35/0x40 [ 45.240875] Allocated by task 242: [ 45.243136] save_stack+0x43/0xd0 [ 45.245385] kasan_kmalloc+0xc4/0xe0 [ 45.247597] kmem_cache_alloc_trace+0xdd/0x190 [ 45.249793] drm_dp_add_port+0x1e0/0x2170 [drm_kms_helper] [ 45.252000] drm_dp_send_link_address+0x4a7/0x740 [drm_kms_helper] [ 45.254389] drm_dp_check_and_send_link_address+0x1a7/0x210 [drm_kms_helper] [ 45.256803] drm_dp_mst_link_probe_work+0x6f/0xb0 [drm_kms_helper] [ 45.259200] process_one_work+0x88d/0x15d0 [ 45.261597] worker_thread+0x1a5/0x1470 [ 45.264038] kthread+0x2f7/0x3b0 [ 45.266371] ret_from_fork+0x35/0x40 [ 45.270937] Freed by task 53: [ 45.273170] save_stack+0x43/0xd0 [ 45.275382] __kasan_slab_free+0x139/0x190 [ 45.277604] kasan_slab_free+0xe/0x10 [ 45.279826] kfree+0x99/0x1b0 [ 45.282044] drm_dp_free_mst_port+0x4a/0x60 [drm_kms_helper] [ 45.284330] drm_dp_destroy_connector_work+0x43e/0x6f0 [drm_kms_helper] [ 45.286660] process_one_work+0x88d/0x15d0 [ 45.288934] worker_thread+0x1a5/0x1470 [ 45.291231] kthread+0x2f7/0x3b0 [ 45.293547] ret_from_fork+0x35/0x40 [ 45.298206] The buggy address belongs to the object at ffff8882b4b70968 which belongs to the cache kmalloc-2k of size 2048 [ 45.303047] The buggy address is located 0 bytes inside of 2048-byte region [ffff8882b4b70968, ffff8882b4b71168) [ 45.308010] The buggy address belongs to the page: [ 45.310477] page:ffffea000ad2dc00 count:1 mapcount:0 mapping:ffff8882c080cf40 index:0x0 compound_mapcount: 0 [ 45.313051] flags: 0x8000000000010200(slab|head) [ 45.315635] raw: 8000000000010200 ffffea000aac2808 ffffea000abe8608 ffff8882c080cf40 [ 45.318300] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000 [ 45.320966] page dumped because: kasan: bad access detected [ 45.326312] Memory state around the buggy address: [ 45.329085] ffff8882b4b70800: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 45.331845] ffff8882b4b70880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 45.334584] >ffff8882b4b70900: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb [ 45.337302] ^ [ 45.340061] ffff8882b4b70980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 45.342910] ffff8882b4b70a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 45.345748] ================================================================== So, this definitely isn't a fix that we want. This being said; there's no real easy fix for this problem because of some of the catch-22's of the MST helpers current design. For starters; we always need to validate a port with drm_dp_get_validated_port_ref(), but validation relies on the lifetime of the port in the actual topology. So once the port is gone, it can't be validated again. If we were to try to make the payload helpers not use port validation, then we'd cause another problem: if the port isn't validated, it could be freed and we'd just start causing more KASAN issues. There are already hacks that attempt to workaround this in drm_dp_mst_destroy_connector_work() by re-initializing the kref so that it can be used again and it's memory can be freed once the VCPI helpers finish removing the port's respective payloads. But none of these really do anything helpful since the port still can't be validated since it's gone from the topology. Also, that workaround is immensely confusing to read through. What really needs to be done in order to fix this is to teach DRM how to track the lifetime of the structs for MST ports and branch devices separately from their lifetime in the actual topology. Simply put; this means having two different krefs-one that removes the port/branch device from the topology, and one that finally calls kfree(). This would let us simplify things, since we'd now be able to keep ports around without having to keep them in the topology at the same time, which is exactly what we need in order to teach our VCPI helpers to only validate ports when it's actually necessary without running the risk of trying to use unallocated memory. Such a fix is on it's way, but for now let's play it safe and just revert this. If this bug has been around for well over a year, we can wait a little while to get an actual proper fix here. Signed-off-by:
Lyude Paul <lyude@redhat.com> Fixes: c54c7374 ("drm/dp_mst: Skip validating ports during destruction, just ref") Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sean Paul <sean@poorly.run> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: stable@vger.kernel.org # v4.6+ Acked-by:
Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20181128210005.24434-1-lyude@redhat.com Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Cristian Marussi authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit d0bab0c3 upstream. On a system with only one CPU online, when another one CPU panics while starting-up, smp_send_stop() will fail to send any STOP message to the other already online core, resulting in a system still responsive and alive at the end of the panic procedure. [ 186.700083] CPU3: shutdown [ 187.075462] CPU2: shutdown [ 187.162869] CPU1: shutdown [ 188.689998] ------------[ cut here ]------------ [ 188.691645] kernel BUG at arch/arm64/kernel/cpufeature.c:886! [ 188.692079] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 188.692444] Modules linked in: [ 188.693031] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.6.0-rc4-00001-g338d25c35a98 #104 [ 188.693175] Hardware name: Foundation-v8A (DT) [ 188.693492] pstate: 200001c5 (nzCv dAIF -PAN -UAO) [ 188.694183] pc : has_cpuid_feature+0xf0/0x348 [ 188.694311] lr : verify_local_elf_hwcaps+0x84/0xe8 [ 188.694410] sp : ffff800011b1bf60 [ 188.694536] x29: ffff800011b1bf60 x28: 0000000000000000 [ 188.694707] x27: 0000000000000000 x26: 0000000000000000 [ 188.694801] x25: 0000000000000000 x24: ffff80001189a25c [ 188.694905] x23: 0000000000000000 x22: 0000000000000000 [ 188.694996] x21: ffff8000114aa018 x20: ffff800011156a38 [ 188.695089] x19: ffff800010c944a0 x18: 0000000000000004 [ 188.695187] x17: 0000000000000000 x16: 0000000000000000 [ 188.695280] x15: 0000249dbde5431e x14: 0262cbe497efa1fa [ 188.695371] x13: 0000000000000002 x12: 0000000000002592 [ 188.695472] x11: 0000000000000080 x10: 00400032b5503510 [ 188.695572] x9 : 0000000000000000 x8 : ffff800010c80204 [ 188.695659] x7 : 00000000410fd0f0 x6 : 0000000000000001 [ 188.695750] x5 : 00000000410fd0f0 x4 : 0000000000000000 [ 188.695836] x3 : 0000000000000000 x2 : ffff8000100939d8 [ 188.695919] x1 : 0000000000180420 x0 : 0000000000180480 [ 188.696253] Call trace: [ 188.696410] has_cpuid_feature+0xf0/0x348 [ 188.696504] verify_local_elf_hwcaps+0x84/0xe8 [ 188.696591] check_local_cpu_capabilities+0x44/0x128 [ 188.696666] secondary_start_kernel+0xf4/0x188 [ 188.697150] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000) [ 188.698639] ---[ end trace 3f12ca47652f7b72 ]--- [ 188.699160] Kernel panic - not syncing: Attempted to kill the idle task! [ 188.699546] Kernel Offset: disabled [ 188.699828] CPU features: 0x00004,20c02008 [ 188.700012] Memory Limit: none [ 188.700538] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- [root@arch ~]# echo Helo Helo [root@arch ~]# cat /proc/cpuinfo | grep proce processor : 0 Make smp_send_stop() account also for the online status of the calling CPU while evaluating how many CPUs are effectively online: this way, the right number of STOPs is sent, so enforcing a proper freeze of the system at the end of panic even under the above conditions. Fixes: 08e875c1 ("arm64: SMP support") Reported-by:
Dave Martin <Dave.Martin@arm.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Cristian Marussi <cristian.marussi@arm.com> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 3b36b13d upstream. Commit 317d9313 ("ALSA: hda/realtek - Set default power save node to 0") makes the ALC225 have pop noise on S3 resume and cold boot. So partially revert this commit for ALC225 to fix the regression. Fixes: 317d9313 ("ALSA: hda/realtek - Set default power save node to 0") BugLink: https://bugs.launchpad.net/bugs/1866357Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200311061328.17614-1-kai.heng.feng@canonical.comSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Thomas Gleixner authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 8d677436 upstream. The recent futex inode life time fix changed the ordering of the futex key union struct members, but forgot to adjust the hash function accordingly, As a result the hashing omits the leading 64bit and even hashes beyond the futex key causing a bad hash distribution which led to a ~100% performance regression. Hand in the futex key pointer instead of a random struct member and make the size calculation based of the struct offset. Fixes: 8019ad13 ("futex: Fix inode life-time issue") Reported-by:
Rong Chen <rong.a.chen@intel.com> Decoded-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
-
Peter Zijlstra authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 8019ad13 upstream. As reported by Jann, ihold() does not in fact guarantee inode persistence. And instead of making it so, replace the usage of inode pointers with a per boot, machine wide, unique inode identifier. This sequence number is global, but shared (file backed) futexes are rare enough that this should not become a performance issue. Reported-by:
Jann Horn <jannh@google.com> Suggested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 82f2bc2f upstream. Clang's -Wpointer-to-int-cast deviates from GCC in that it warns when casting to enums. The kernel does this in certain places, such as device tree matches to set the version of the device being used, which allows the kernel to avoid using a gigantic union. https://elixir.bootlin.com/linux/v5.5.8/source/drivers/ata/ahci_brcm.c#L428 https://elixir.bootlin.com/linux/v5.5.8/source/drivers/ata/ahci_brcm.c#L402 https://elixir.bootlin.com/linux/v5.5.8/source/include/linux/mod_devicetable.h#L264 To avoid a ton of false positive warnings, disable this particular part of the warning, which has been split off into a separate diagnostic so that the entire warning does not need to be turned off for clang. It will be visible under W=1 in case people want to go about fixing these easily and enabling the warning treewide. Cc: stable@vger.kernel.org Link: https://github.com/ClangBuiltLinux/linux/issues/887 Link: https://github.com/llvm/llvm-project/commit/2a41b31fcdfcb67ab7038fc2ffb606fd50b83a84Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Anthony Mallet authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit b401f8c4 ] By default, tty_port_init() initializes those parameters to a multiple of HZ. For instance in line 69 of tty_port.c: port->close_delay = (50 * HZ) / 100; https://github.com/torvalds/linux/blob/master/drivers/tty/tty_port.c#L69 With e.g. CONFIG_HZ = 250 (as this is the case for Ubuntu 18.04 linux-image-4.15.0-37-generic), the default setting for close_delay is thus 125. When ioctl(fd, TIOCGSERIAL, &s) is executed, the setting returned in user space is '12' (125/10). When ioctl(fd, TIOCSSERIAL, &s) is then executed with the same setting '12', the value is interpreted as '120' which is different from the current setting and a EPERM error may be raised by set_serial_info() if !CAP_SYS_ADMIN. https://github.com/torvalds/linux/blob/master/drivers/usb/class/cdc-acm.c#L919 Fixes: ba2d8ce9 ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)") Signed-off-by:
Anthony Mallet <anthony.mallet@laas.fr> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200312133101.7096-2-anthony.mallet@laas.frSigned-off-by:
-
Anthony Mallet authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 633e2b2d ] close_delay and closing_wait are specified in hundredth of a second but stored internally in jiffies. Use the jiffies_to_msecs() and msecs_to_jiffies() functions to convert from each other. Signed-off-by:
-
Joerg Roedel authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 763802b5 upstream. Commit 3f8fd02b ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") introduced a call to vmalloc_sync_all() in the vunmap() code-path. While this change was necessary to maintain correctness on x86-32-pae kernels, it also adds additional cycles for architectures that don't need it. Specifically on x86-64 with CONFIG_VMAP_STACK=y some people reported severe performance regressions in micro-benchmarks because it now also calls the x86-64 implementation of vmalloc_sync_all() on vunmap(). But the vmalloc_sync_all() implementation on x86-64 is only needed for newly created mappings. To avoid the unnecessary work on x86-64 and to gain the performance back, split up vmalloc_sync_all() into two functions: * vmalloc_sync_mappings(), and * vmalloc_sync_unmappings() Most call-sites to vmalloc_sync_all() only care about new mappings being synchronized. The only exception is the new call-site added in the above mentioned commit. Shile Zhang directed us to a report of an 80% regression in reaim throughput. Fixes: 3f8fd02b ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") Reported-by:
kernel test robot <oliver.sang@intel.com> Reported-by:
Shile Zhang <shile.zhang@linux.alibaba.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Tested-by:
Borislav Petkov <bp@suse.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [GHES] Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20191009124418.8286-1-joro@8bytes.org Link: https://lists.01.org/hyperkitty/list/lkp@lists.01.org/thread/4D3JPPHBNOSPFK2KEPC6KGKS6J25AIDB/ Link: http://lkml.kernel.org/r/20191113095530.228959-1-shile.zhang@linux.alibaba.comSigned-off-by:
-
Vlastimil Babka authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 0715e6c5 upstream. Sachin reports [1] a crash in SLUB __slab_alloc(): BUG: Kernel NULL pointer dereference on read at 0x000073b0 Faulting instruction address: 0xc0000000003d55f4 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 19 PID: 1 Comm: systemd Not tainted 5.6.0-rc2-next-20200218-autotest #1 NIP: c0000000003d55f4 LR: c0000000003d5b94 CTR: 0000000000000000 REGS: c0000008b37836d0 TRAP: 0300 Not tainted (5.6.0-rc2-next-20200218-autotest) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24004844 XER: 00000000 CFAR: c00000000000dec4 DAR: 00000000000073b0 DSISR: 40000000 IRQMASK: 1 GPR00: c0000000003d5b94 c0000008b3783960 c00000000155d400 c0000008b301f500 GPR04: 0000000000000dc0 0000000000000002 c0000000003443d8 c0000008bb398620 GPR08: 00000008ba2f0000 0000000000000001 0000000000000000 0000000000000000 GPR12: 0000000024004844 c00000001ec52a00 0000000000000000 0000000000000000 GPR16: c0000008a1b20048 c000000001595898 c000000001750c18 0000000000000002 GPR20: c000000001750c28 c000000001624470 0000000fffffffe0 5deadbeef0000122 GPR24: 0000000000000001 0000000000000dc0 0000000000000002 c0000000003443d8 GPR28: c0000008b301f500 c0000008bb398620 0000000000000000 c00c000002287180 NIP ___slab_alloc+0x1f4/0x760 LR __slab_alloc+0x34/0x60 Call Trace: ___slab_alloc+0x334/0x760 (unreliable) __slab_alloc+0x34/0x60 __kmalloc_node+0x110/0x490 kvmalloc_node+0x58/0x110 mem_cgroup_css_online+0x108/0x270 online_css+0x48/0xd0 cgroup_apply_control_enable+0x2ec/0x4d0 cgroup_mkdir+0x228/0x5f0 kernfs_iop_mkdir+0x90/0xf0 vfs_mkdir+0x110/0x230 do_mkdirat+0xb0/0x1a0 system_call+0x5c/0x68 This is a PowerPC platform with following NUMA topology: available: 2 nodes (0-1) node 0 cpus: node 0 size: 0 MB node 0 free: 0 MB node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 node 1 size: 35247 MB node 1 free: 30907 MB node distances: node 0 1 0: 10 40 1: 40 10 possible numa nodes: 0-31 This only happens with a mmotm patch "mm/memcontrol.c: allocate shrinker_map on appropriate NUMA node" [2] which effectively calls kmalloc_node for each possible node. SLUB however only allocates kmem_cache_node on online N_NORMAL_MEMORY nodes, and relies on node_to_mem_node to return such valid node for other nodes since commit a561ce00 ("slub: fall back to node_to_mem_node() node if allocating on memoryless node"). This is however not true in this configuration where the _node_numa_mem_ array is not initialized for nodes 0 and 2-31, thus it contains zeroes and get_partial() ends up accessing non-allocated kmem_cache_node. A related issue was reported by Bharata (originally by Ramachandran) [3] where a similar PowerPC configuration, but with mainline kernel without patch [2] ends up allocating large amounts of pages by kmalloc-1k kmalloc-512. This seems to have the same underlying issue with node_to_mem_node() not behaving as expected, and might probably also lead to an infinite loop with CONFIG_SLUB_CPU_PARTIAL [4]. This patch should fix both issues by not relying on node_to_mem_node() anymore and instead simply falling back to NUMA_NO_NODE, when kmalloc_node(node) is attempted for a node that's not online, or has no usable memory. The "usable memory" condition is also changed from node_present_pages() to N_NORMAL_MEMORY node state, as that is exactly the condition that SLUB uses to allocate kmem_cache_node structures. The check in get_partial() is removed completely, as the checks in ___slab_alloc() are now sufficient to prevent get_partial() being reached with an invalid node. [1] https://lore.kernel.org/linux-next/3381CD91-AB3D-4773-BA04-E7A072A63968@linux.vnet.ibm.com/ [2] https://lore.kernel.org/linux-mm/fff0e636-4c36-ed10-281c-8cdb0687c839@virtuozzo.com/ [3] https://lore.kernel.org/linux-mm/20200317092624.GB22538@in.ibm.com/ [4] https://lore.kernel.org/linux-mm/088b5996-faae-8a56-ef9c-5b567125ae54@suse.cz/ Fixes: a561ce00 ("slub: fall back to node_to_mem_node() node if allocating on memoryless node") Reported-by:
Sachin Sant <sachinp@linux.vnet.ibm.com> Reported-by:
PUVICHAKRAVARTHY RAMACHANDRAN <puvichakravarthy@in.ibm.com> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Bharata B Rao <bharata@linux.ibm.com> Reviewed-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Christopher Lameter <cl@linux.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200320115533.9604-1-vbabka@suse.czDebugged-by:
-
Linus Torvalds authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 5076190d upstream. This is just a cleanup addition to Jann's fix to properly update the transaction ID for the slub slowpath in commit fd4d9c7d ("mm: slub: add missing TID bump.."). The transaction ID is what protects us against any concurrent accesses, but we should really also make sure to make the 'freelist' comparison itself always use the same freelist value that we then used as the new next free pointer. Jann points out that if we do all of this carefully, we could skip the transaction ID update for all the paths that only remove entries from the lists, and only update the TID when adding entries (to avoid the ABA issue with cmpxchg and list handling re-adding a previously seen value). But this patch just does the "make sure to cmpxchg the same value we used" rather than then try to be clever. Acked-by:
-
Chunguang Xu authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 7d36665a upstream. An eventfd monitors multiple memory thresholds of the cgroup, closes them, the kernel deletes all events related to this eventfd. Before all events are deleted, another eventfd monitors the memory threshold of this cgroup, leading to a crash: BUG: kernel NULL pointer dereference, address: 0000000000000004 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 800000033058e067 P4D 800000033058e067 PUD 3355ce067 PMD 0 Oops: 0002 [#1] SMP PTI CPU: 2 PID: 14012 Comm: kworker/2:6 Kdump: loaded Not tainted 5.6.0-rc4 #3 Hardware name: LENOVO 20AWS01K00/20AWS01K00, BIOS GLET70WW (2.24 ) 05/21/2014 Workqueue: events memcg_event_remove RIP: 0010:__mem_cgroup_usage_unregister_event+0xb3/0x190 RSP: 0018:ffffb47e01c4fe18 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff8bb223a8a000 RCX: 0000000000000001 RDX: 0000000000000001 RSI: ffff8bb22fb83540 RDI: 0000000000000001 RBP: ffffb47e01c4fe48 R08: 0000000000000000 R09: 0000000000000010 R10: 000000000000000c R11: 071c71c71c71c71c R12: ffff8bb226aba880 R13: ffff8bb223a8a480 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8bb242680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000004 CR3: 000000032c29c003 CR4: 00000000001606e0 Call Trace: memcg_event_remove+0x32/0x90 process_one_work+0x172/0x380 worker_thread+0x49/0x3f0 kthread+0xf8/0x130 ret_from_fork+0x35/0x40 CR2: 0000000000000004 We can reproduce this problem in the following ways: 1. We create a new cgroup subdirectory and a new eventfd, and then we monitor multiple memory thresholds of the cgroup through this eventfd. 2. closing this eventfd, and __mem_cgroup_usage_unregister_event () will be called multiple times to delete all events related to this eventfd. The first time __mem_cgroup_usage_unregister_event() is called, the kernel will clear all items related to this eventfd in thresholds-> primary. Since there is currently only one eventfd, thresholds-> primary becomes empty, so the kernel will set thresholds-> primary and hresholds-> spare to NULL. If at this time, the user creates a new eventfd and monitor the memory threshold of this cgroup, kernel will re-initialize thresholds-> primary. Then when __mem_cgroup_usage_unregister_event () is called for the second time, because thresholds-> primary is not empty, the system will access thresholds-> spare, but thresholds-> spare is NULL, which will trigger a crash. In general, the longer it takes to delete all events related to this eventfd, the easier it is to trigger this problem. The solution is to check whether the thresholds associated with the eventfd has been cleared when deleting the event. If so, we do nothing. [akpm@linux-foundation.org: fix comment, per Kirill] Fixes: 907860ed ("cgroups: make cftype.unregister_event() void-returning") Signed-off-by:
Chunguang Xu <brookxu@tencent.com> Signed-off-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/077a6f67-aefa-4591-efec-f2f3af2b0b02@gmail.comSigned-off-by:
-
Corentin Labbe authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 5d892919 upstream. I have hit the following build error: armv7a-hardfloat-linux-gnueabi-ld: drivers/rtc/rtc-max8907.o: in function `max8907_rtc_probe': rtc-max8907.c:(.text+0x400): undefined reference to `regmap_irq_get_virq' max8907 should select REGMAP_IRQ Fixes: 94c01ab6 ("rtc: add MAX8907 RTC driver") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Alexander Shishkin authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit ce666be8 upstream. There are a few places in the driver that end up returning ENOTSUPP to the user, replace those with EINVAL. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: ba82664c ("intel_th: Add Memory Storage Unit driver") Cc: stable@vger.kernel.org # v4.4+ Link: https://lore.kernel.org/r/20200317062215.15598-6-alexander.shishkin@linux.intel.comSigned-off-by:
-
Samuel Thibault authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 9d32c0cd upstream. get_char was erroneously given the address of the pointer to the text instead of the address of the text, thus leading to random crashes when the user requests speaking a word while the current position is on a space character and say_word_ctl is not enabled. Reported-on: https://github.com/bytefire/speakup/issues/1Reported-by:
Kirk Reiser <kirk@reisers.ca> Reported-by:
Janina Sajka <janina@rednote.net> Reported-by:
Alexandr Epaneshnikov <aarnaarn2@gmail.com> Reported-by:
Gregory Nowak <greg@gregn.net> Reported-by:
deedra waters <deedra@the-brannons.com> Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Tested-by:
Michael Taboada <michael@michaels.world> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200306003047.thijtmqrnayd3dmw@functionSigned-off-by:
-
Michael Straube authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit bb5786b9 upstream. This device was added to the stand-alone driver on github. Add it to the staging driver as well. Link: https://github.com/lwfinger/rtl8188eu/commit/2141f244c3e7Signed-off-by:
Michael Straube <straube.linux@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200312093652.13918-1-straube.linux@gmail.comSigned-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 5461e053 upstream. The return value checks in snd_pcm_plug_alloc() are covered with snd_BUG_ON() macro that may trigger a kernel WARNING depending on the kconfig. But since the error condition can be triggered by a weird user space parameter passed to OSS layer, we shouldn't give the kernel stack trace just for that. As it's a normal error condition, let's remove snd_BUG_ON() macro usage there. Reported-by: syzbot+2a59ee7a9831b264f45e@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200312155730.7520-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit f2ecf903 upstream. Each OSS PCM plugins allocate its internal buffer per pre-calculation of the max buffer size through the chain of plugins (calling src_frames and dst_frames callbacks). This works for most plugins, but the rate plugin might behave incorrectly. The calculation in the rate plugin involves with the fractional position, i.e. it may vary depending on the input position. Since the buffer size pre-calculation is always done with the offset zero, it may return a shorter size than it might be; this may result in the out-of-bound access as spotted by fuzzer. This patch addresses those possible buffer overflow accesses by simply setting the upper limit per the given buffer size for each plugin before src_frames() and after dst_frames() calls. Reported-by: syzbot+e1fe9f44fb8ecf4fb5dd@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/000000000000b25ea005a02bcf21@google.com Link: https://lore.kernel.org/r/20200309082148.19855-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 6c3171ef upstream. This is a similar bug like the previous case for virmidi: the invalid running status is kept after receiving a sysex message. Again the fix is to clear the running status after handling the sysex. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de Link: https://lore.kernel.org/r/20200316090506.23966-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 4384f167 upstream. The virmidi driver handles sysex event exceptionally in a short-cut snd_seq_dump_var_event() call, but this missed the reset of the running status. As a result, it may lead to an incomplete command right after the sysex when an event with the same running status was queued. Fix it by clearing the running status properly via alling snd_midi_event_reset_decode() for that code path. Reported-by:
Andreas Steinmetz <ast@domdv.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de Link: https://lore.kernel.org/r/20200316090506.23966-2-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit d683469b upstream. The MIDI input event parser of the LINE6 driver may enter into an endless loop when the unexpected data sequence is given, as it tries to continue the secondary bytes without termination. Also, when the input data is too short, the parser returns a negative error, while the caller doesn't handle it properly. This would lead to the unexpected behavior as well. This patch addresses those issues by checking the return value correctly and handling the one-byte event in the parser properly. The bug was reported by syzkaller. Reported-by: syzbot+cce32521ee0a824c21f7@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/000000000000033087059f8f8fa3@google.com Link: https://lore.kernel.org/r/20200309095922.30269-1-tiwai@suse.deSigned-off-by:
-
Scott Chen authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit cecc113c upstream. Add a device id for HP LD381 Display LD381: 03f0:0f7f Signed-off-by:
Scott Chen <scott@labau.com.tw> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Ran Wang authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit b433e340 upstream. When loading new kernel via kexec, we need to shutdown host controller to avoid any un-expected memory accessing during new kernel boot. Signed-off-by:
Ran Wang <ran.wang_1@nxp.com> Cc: stable <stable@vger.kernel.org> Tested-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200306092328.41253-1-ran.wang_1@nxp.comSigned-off-by:
-
Daniele Palmas authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 8e852a79 upstream. Add ME910G1 ECM composition 0x110b: tty, tty, tty, ecm Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20200304104310.2938-1-dnlplm@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Hans de Goede authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit 75d7676e upstream. We have been receiving bug reports that ethernet connections over RTL8153 based ethernet adapters stops working after a while with errors like these showing up in dmesg when the ethernet stops working: [12696.189484] r8152 6-1:1.0 enp10s0u1: Tx timeout [12702.333456] r8152 6-1:1.0 enp10s0u1: Tx timeout [12707.965422] r8152 6-1:1.0 enp10s0u1: Tx timeout This has been reported on Dell WD15 docks, Belkin USB-C Express Dock 3.1 docks and with generic USB to ethernet dongles using the RTL8153 chipsets. Some users have tried adding usbcore.quirks=0bda:8153:k to the kernel commandline and all users who have tried this report that this fixes this. Also note that we already have an existing NO_LPM quirk for the RTL8153 used in the Microsoft Surface Dock (where it uses a different usb-id). This commit adds a NO_LPM quirk for the generic Realtek RTL8153 0bda:8153 usb-id, fixing the Tx timeout errors on these devices. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198931 Cc: stable@vger.kernel.org Cc: russianneuromancer@ya.ru Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200313120708.100339-1-hdegoede@redhat.comSigned-off-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1873852 commit b63e48fb upstream. Realtek Hub (0bda:0x0487) used in Dell Dock WD19 sometimes drops off the bus when bringing underlying ports from U3 to U0. Disabling LPM on the hub during setting link state is not enough, so let's disable LPM completely for this hub. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Daniel Axtens authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 3745488e ] altera_get_note is called from altera_init, where key is kzalloc(33). When the allocation functions are annotated to allow the compiler to see the sizes of objects, and with FORTIFY_SOURCE, we see: In file included from drivers/misc/altera-stapl/altera.c:14:0: In function ‘strlcpy’, inlined from ‘altera_init’ at drivers/misc/altera-stapl/altera.c:2189:5: include/linux/string.h:378:4: error: call to ‘__write_overflow’ declared with attribute error: detected write beyond size of object passed as 1st parameter __write_overflow(); ^~~~~~~~~~~~~~~~~~ That refers to this code in altera_get_note: if (key != NULL) strlcpy(key, &p[note_strings + get_unaligned_be32( &p[note_table + (8 * i)])], length); The error triggers because the length of 'key' is 33, but the copy uses length supplied as the 'length' parameter, which is always 256. Split the size parameter into key_len and val_len, and use the appropriate length depending on what is being copied. Detected by compiler error, only compile-tested. Cc: "Igor M. Liplianin" <liplianin@netup.ru> Signed-off-by:
Daniel Axtens <dja@axtens.net> Link: https://lore.kernel.org/r/20200120074344.504-2-dja@axtens.netSigned-off-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/202002251042.D898E67AC@keescookSigned-off-by:
-
Marek Szyprowski authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit c0fd99d6 ] Writing to the built-in strings arrays doesn't work if driver is loaded as kernel module. This is also considered as a bad pattern. Fix this by adding a call to clk_get() with legacy clock name. This fixes following kernel oops if driver is loaded as module: Unable to handle kernel paging request at virtual address bf047978 pgd = (ptrval) [bf047978] *pgd=59344811, *pte=5903c6df, *ppte=5903c65f Internal error: Oops: 80f [#1] SMP ARM Modules linked in: mc exynosdrm(+) analogix_dp rtc_s3c exynos_ppmu i2c_gpio CPU: 1 PID: 212 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200219 #326 videodev: Linux video capture interface: v2.00 Hardware name: Samsung Exynos (Flattened Device Tree) PC is at exynos_dsi_probe+0x1f0/0x384 [exynosdrm] LR is at exynos_dsi_probe+0x1dc/0x384 [exynosdrm] ... Process systemd-udevd (pid: 212, stack limit = 0x(ptrval)) ... [<bf03cf14>] (exynos_dsi_probe [exynosdrm]) from [<c09b1ca0>] (platform_drv_probe+0x6c/0xa4) [<c09b1ca0>] (platform_drv_probe) from [<c09afcb8>] (really_probe+0x210/0x350) [<c09afcb8>] (really_probe) from [<c09aff74>] (driver_probe_device+0x60/0x1a0) [<c09aff74>] (driver_probe_device) from [<c09b0254>] (device_driver_attach+0x58/0x60) [<c09b0254>] (device_driver_attach) from [<c09b02dc>] (__driver_attach+0x80/0xbc) [<c09b02dc>] (__driver_attach) from [<c09ade00>] (bus_for_each_dev+0x68/0xb4) [<c09ade00>] (bus_for_each_dev) from [<c09aefd8>] (bus_add_driver+0x130/0x1e8) [<c09aefd8>] (bus_add_driver) from [<c09b0d64>] (driver_register+0x78/0x110) [<c09b0d64>] (driver_register) from [<bf038558>] (exynos_drm_init+0xe8/0x11c [exynosdrm]) [<bf038558>] (exynos_drm_init [exynosdrm]) from [<c0302fa8>] (do_one_initcall+0x50/0x220) [<c0302fa8>] (do_one_initcall) from [<c03dd02c>] (do_init_module+0x60/0x210) [<c03dd02c>] (do_init_module) from [<c03dbf44>] (load_module+0x1c0c/0x2310) [<c03dbf44>] (load_module) from [<c03dc85c>] (sys_finit_module+0xac/0xbc) [<c03dc85c>] (sys_finit_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54) Exception stack(0xd979bfa8 to 0xd979bff0) ... ---[ end trace db16efe05faab470 ]--- Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 0a9d1e3f ] Properly propagate error value from devm_regulator_bulk_get() and don't confuse user with meaningless warning about failure in getting regulators in case of deferred probe. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Thommy Jakobsson authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 5dd83049 ] In the public interface for chipselect, there is always an entry commented as "Dummy generic FIFO entry" pushed down to the fifo right after the activate/deactivate command. The dummy entry is 0x0, irregardless if the intention was to activate or deactive the cs. This causes the cs line to glitch rather than beeing activated in the case when there was an activate command. This has been observed on oscilloscope, and have caused problems for at least one specific flash device type connected to the qspi port. After the change the glitch is gone and cs goes active when intended. The reason why this worked before (except for the glitch) was because when sending the actual data, the CS bits are once again set. Since most flashes uses mode 0, there is always a half clk period anyway for cs to clk active setup time. If someone would rely on timing from a chip_select call to a transfer_one, it would fail though. It is unknown why the dummy entry was there in the first place, git log seems to be of no help in this case. The reference manual gives no indication of the necessity of this. In fact the lower 8 bits are a setup (or hold in case of deactivate) time expressed in cycles. So this should not be needed to fulfill any setup/hold timings. Signed-off-by:
Thommy Jakobsson <thommyj@gmail.com> Reviewed-by:
Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> Link: https://lore.kernel.org/r/20200224162643.29102-1-thommyj@gmail.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Kishon Vijay Abraham I authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 27f13774 ] 'dma-ranges' in a PCI bridge node does correctly set dma masks for PCI devices not described in the DT. Certain DRA7 platforms (e.g., DRA76) has RAM above 32-bit boundary (accessible with LPAE config) though the PCIe bridge will be able to access only 32-bits. Add 'dma-ranges' property in PCIe RC DT nodes to indicate the host bridge can access only 32 bits. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Naveen N. Rao authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit cb0cc635 ] Selecting CONFIG_DEBUG_INFO_BTF results in the below warning from ld: ld: warning: orphan section `.BTF' from `.btf.vmlinux.bin.o' being placed in section `.BTF' Include .BTF section in vmlinux explicitly to fix the same. Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200220113132.857132-1-naveen.n.rao@linux.vnet.ibm.comSigned-off-by:
-
Yuji Sasaki authored
BugLink: https://bugs.launchpad.net/bugs/1873852 [ Upstream commit 136b5cd2 ] spi_qup_suspend() will cause synchronous external abort when runtime suspend is enabled and applied, as it tries to access SPI controller register while clock is already disabled in spi_qup_pm_suspend_runtime(). Signed-off-by:
Yuji sasaki <sasakiy@chromium.org> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200214074340.2286170-1-vkoul@kernel.orgSigned-off-by:
-
- 15 Apr, 2020 2 commits
-
-
Richard Palethorpe authored
CVE-2020-11494 struct can_frame contains some padding which is not explicitly zeroed in slc_bump. This uninitialized data will then be transmitted if the stack initialization hardening feature is not enabled (CONFIG_INIT_STACK_ALL). This commit just zeroes the whole struct including the padding. Signed-off-by:
Richard Palethorpe <rpalethorpe@suse.com> Fixes: a1044e36 ("can: add slcan driver for serial/USB-serial CAN adapters") Reviewed-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net> (cherry picked from commit b9258a2c) Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Andrea Righi <andrea.righi@canonical.com> Signed-off-by:
-
Yang Xu authored
BugLink: https://bugs.launchpad.net/bugs/1869644 Currently, when we add a new user key, the calltrace as below: add_key() key_create_or_update() key_alloc() __key_instantiate_and_link generic_key_instantiate key_payload_reserve ...... Since commit a08bf91c ("KEYS: allow reaching the keys quotas exactly"), we can reach max bytes/keys in key_alloc, but we forget to remove this limit when we reserver space for payload in key_payload_reserve. So we can only reach max keys but not max bytes when having delta between plen and type->def_datalen. Remove this limit when instantiating the key, so we can keep consistent with key_alloc. Also, fix the similar problem in keyctl_chown_key(). Fixes: 0b77f5bf ("keys: make the keyring quotas controllable through /proc/sys") Fixes: a08bf91c ("KEYS: allow reaching the keys quotas exactly") Cc: stable@vger.kernel.org # 5.0.x Cc: Eric Biggers <ebiggers@google.com> Signed-off-by:
Yang Xu <xuyang2018.jy@cn.fujitsu.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
-
- 05 Apr, 2020 3 commits
-
-
Khalid Elmously authored
Signed-off-by:Khalid Elmously <khalid.elmously@canonical.com>
-
Khalid Elmously authored
BugLink: https://bugs.launchpad.net/bugs/1870660 Properties: no-test-build Signed-off-by:
-
Khalid Elmously authored
Ignore: yes Signed-off-by:
-
- 03 Apr, 2020 2 commits
-
-
Cengiz Can authored
There was a recent change in blktrace.c that added a RCU protection to `q->blk_trace` in order to fix a use-after-free issue during access. However the change missed an edge case that can lead to dereferencing of `bt` pointer even when it's NULL: Coverity static analyzer marked this as a FORWARD_NULL issue with CID 1460458. ``` /kernel/trace/blktrace.c: 1904 in sysfs_blk_trace_attr_store() 1898 ret = 0; 1899 if (bt == NULL) 1900 ret = blk_trace_setup_queue(q, bdev); 1901 1902 if (ret == 0) { 1903 if (attr == &dev_attr_act_mask) >>> CID 1460458: Null pointer dereferences (FORWARD_NULL) >>> Dereferencing null pointer "bt". 1904 bt->act_mask = value; 1905 else if (attr == &dev_attr_pid) 1906 bt->pid = value; 1907 else if (attr == &dev_attr_start_lba) 1908 bt->start_lba = value; 1909 else if (attr == &dev_attr_end_lba) ``` Added a reassignment with RCU annotation to fix the issue. Fixes: c780e86d ("blktrace: Protect q->blk_trace with RCU") Cc: stable@vger.kernel.org Reviewed-by:Ming Lei <ming.lei@redhat.com> Reviewed-by:
Bob Liu <bob.liu@oracle.com> Reviewed-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Cengiz Can <cengiz@kernel.wtf> Signed-off-by:
Jens Axboe <axboe@kernel.dk> CVE-2019-19768 (cherry picked from commit 153031a3) Signed-off-by:
Benjamin M Romer <benjamin.romer@canonical.com> Acked-by:
Kamal Mostafa <kamal@canonical.com> Acked-by:
-
Jan Kara authored
KASAN is reporting that __blk_add_trace() has a use-after-free issue when accessing q->blk_trace. Indeed the switching of block tracing (and thus eventual freeing of q->blk_trace) is completely unsynchronized with the currently running tracing and thus it can happen that the blk_trace structure is being freed just while __blk_add_trace() works on it. Protect accesses to q->blk_trace by RCU during tracing and make sure we wait for the end of RCU grace period when shutting down tracing. Luckily that is rare enough event that we can afford that. Note that postponing the freeing of blk_trace to an RCU callback should better be avoided as it could have unexpected user visible side-effects as debugfs files would be still existing for a short while block tracing has been shut down. Link: https://bugzilla.kernel.org/show_bug.cgi?id=205711 CC: stable@vger.kernel.org Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Reported-by:
Tristan Madani <tristmd@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
