- 19 Mar, 2019 31 commits
-
-
Chinh T Cao authored
In the ice_aq_set_phy_cfg AQ command, the 16.4 bit is reserved. This patch will make sure that this bit will never be set to 1. Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Brett Creeley authored
In ice_pf_rxq_wait we are using an unnecessary local variable and also we are checking if the timeout time was reached after the loop. Get rid of the local variable and return 0 right when we get a successful result. This makes it so we can return -ETIMEDOUT if we ever exit the loop because we know the timeout time has been hit. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Bruce Allan authored
Add a local variable struct device *dev to avoid unnecessary de-references throughout ice_probe(). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Akeem G Abodunrin authored
This patch fixes issues with VF queues being disabled, and VF netdev network carrier being lost after reset. Basically, we need to check if VF is enabled, and queue configured in reset_all_vfs flow, and disable/enable those queues appropriately whenever the function is called after Global/CORER/PFR reset/rebuild/replay. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Michal Swiatkowski authored
Set egress (Rx) pruning enable flag for VF VSI in VSI ctxt to enable prune action. To avoid seeing broadcast packet in different VLAN, pruning enable flag in VSI ctxt should be set. Write new functions (fill VSI ctx) to not repeat send ctxt code. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Peter Xu authored
The variable is never used. CC: Michael S. Tsirkin <mst@redhat.com> CC: Jason Wang <jasowang@redhat.com> CC: virtualization@lists.linux-foundation.org CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Provide an explanation of what is expected with respect to sending new versions of specific patches within a patch series, as well as what happens if an earlier patch series accidentally gets merged). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: fixes 2019-03-18 please apply the following three patches to -net. The first two are fixes for minor race conditions in the probe code, while the third one gets dropwatch working (again). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
As part of the TX completion path, qeth_release_skbs() frees the completed skbs with __skb_queue_purge(). This ends in kfree_skb(), reporting every completed skb as dropped. On the other hand when dropping an skb in .ndo_start_xmit, we end up calling consume_skb()... where we should be using kfree_skb() so that drop monitors get notified. Switch the drop/consume logic around, and also don't accumulate dropped packets in the tx_errors statistics. Fixes: dc149e37 ("s390/qeth: replace open-coded skb_queue_walk()") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
The ucast IP table is utilized by some of the L3-specific sysfs attributes that qeth_l3_create_device_attributes() provides. So initialize the table _before_ registering the attributes. Fixes: ebccc739 ("s390/qeth: add missing hash table initializations") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
The HW trap and VNICC configuration is exposed via sysfs, and may have already been modified when qeth_l?_probe_device() attempts to initialize them. So (1) initialize the VNICC values a little earlier, and (2) don't bother about the HW trap mode, it was already initialized before. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bjorn Helgaas authored
The device ID alone does not uniquely identify a device. Test both the vendor and device ID to make sure we don't mistakenly think some other vendor's 0xB410 device is a Digium HFC4S. Also, instead of the bare hex ID, use the same constant (PCI_DEVICE_ID_DIGIUM_HFC4S) used in the device ID table. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Xin Long says: ==================== sctp: fix ignoring asoc_id for tcp-style sockets on some setsockopts This is a patchset to fix ignoring asoc_id for tcp-style sockets on some setsockopts, introduced by SCTP_CURRENT_ASSOC of the patchset: [net-next,00/24] sctp: support SCTP_FUTURE/CURRENT/ALL_ASSOC (https://patchwork.ozlabs.org/cover/1031706/) As Marcelo suggested, we fix it on each setsockopt that is using SCTP_CURRENT_ASSOC one by one by adding the check: if (sctp_style(sk, TCP)) xxx.xxx_assoc_id = SCTP_FUTURE_ASSOC; so that assoc_id will be completely ingored for tcp-style socket on setsockopts, and works as SCTP_FUTURE_ASSOC. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_STREAM_SCHEDULER sockopt. Fixes: 7efba10d ("sctp: add SCTP_FUTURE_ASOC and SCTP_CURRENT_ASSOC for SCTP_STREAM_SCHEDULER sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_EVENT sockopt. Fixes: d251f05e ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_EVENT sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_ENABLE_STREAM_RESET sockopt. Fixes: 99a62135 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_ENABLE_STREAM_RESET sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_DEFAULT_PRINFO sockopt. Fixes: 3a583059 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_DEFAULT_PRINFO sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_AUTH_DEACTIVATE_KEY sockopt. Fixes: 2af66ff3 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_AUTH_DEACTIVATE_KEY sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_AUTH_DELETE_KEY sockopt. Fixes: 3adcc300 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_AUTH_DELETE_KEY sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_AUTH_ACTIVE_KEY sockopt. Fixes: bf9fb6ad ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_AUTH_ACTIVE_KEY sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_AUTH_KEY sockopt. Fixes: 7fb3be13 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_AUTH_KEY sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_MAX_BURST sockopt. Fixes: e0651a0d ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_MAX_BURST sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_CONTEXT sockopt. Fixes: 49b037ac ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_CONTEXT sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_DEFAULT_SNDINFO sockopt. Fixes: 92fc3bd9 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_DEFAULT_SNDINFO sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_DELAYED_SACK sockopt. Fixes: 9c5829e1 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_DELAYED_SACK sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
Currently if the user pass an invalid asoc_id to SCTP_DEFAULT_SEND_PARAM on a TCP-style socket, it will silently ignore the new parameters. That's because after not finding an asoc, it is checking asoc_id against the known values of CURRENT/FUTURE/ALL values and that fails to match. IOW, if the user supplies an invalid asoc id or not, it should either match the current asoc or the socket itself so that it will inherit these later. Fixes it by forcing asoc_id to SCTP_FUTURE_ASSOC in case it is a TCP-style socket without an asoc, so that the values get set on the socket. Fixes: 707e45b3 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_DEFAULT_SEND_PARAM sockopt") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
Now sctp_copy_descendant() copies pd_lobby from old sctp scok to new sctp sock. If sctp_sock_migrate() returns error, it will panic when releasing new sock and trying to purge pd_lobby due to the incorrect pointers in pd_lobby. [ 120.485116] kasan: CONFIG_KASAN_INLINE enabled [ 120.486270] kasan: GPF could be caused by NULL-ptr deref or user [ 120.509901] Call Trace: [ 120.510443] sctp_ulpevent_free+0x1e8/0x490 [sctp] [ 120.511438] sctp_queue_purge_ulpevents+0x97/0xe0 [sctp] [ 120.512535] sctp_close+0x13a/0x700 [sctp] [ 120.517483] inet_release+0xdc/0x1c0 [ 120.518215] __sock_release+0x1d2/0x2a0 [ 120.519025] sctp_do_peeloff+0x30f/0x3c0 [sctp] We fix it by not copying sctp_sock pd_lobby in sctp_copy_descendan(), and skb_queue_head_init() can also be removed in sctp_sock_migrate(). Reported-by: syzbot+85e0b422ff140b03672a@syzkaller.appspotmail.com Fixes: 89664c62 ("sctp: sctp_sock_migrate() returns error if sctp_bind_addr_dup() fails") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
sctp_hdr(skb) only works when skb->transport_header is set properly. But in Netfilter, skb->transport_header for ipv6 is not guaranteed to be right value for sctphdr. It would cause to fail to check the checksum for sctp packets. So fix it by using offset, which is always right in all places. v1->v2: - Fix the changelog. Fixes: e6d8b64b ("net: sctp: fix and consolidate SCTP checksumming code") Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yoshiki Komachi authored
I am using "protocol ip" filters in TC to manipulate TC flower classifiers, which are only available with "protocol ip". However, I faced an issue that packets sent via raw sockets with ETH_P_ALL did not match the ip filters even if they did satisfy the condition (e.g., DHCP offer from dhcpd). I have determined that the behavior was caused by an unexpected value stored in skb->protocol, namely, ETH_P_ALL instead of ETH_P_IP, when packets were sent via raw sockets with ETH_P_ALL set. IMHO, storing ETH_P_ALL in skb->protocol is not appropriate for packets sent via raw sockets because ETH_P_ALL is not a real ether type used on wire, but a virtual one. This patch fixes the tx protocol selection in cases of transmission via raw sockets created with ETH_P_ALL so that it asks the driver to extract protocol from the Ethernet header. Fixes: 75c65772 ("net/packet: Ask driver for protocol if not provided by user") Signed-off-by: Yoshiki Komachi <komachi.yoshiki@lab.ntt.co.jp> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
When using fanouts with AF_PACKET, the demux functions such as fanout_demux_cpu will return an index in the fanout socket array, which corresponds to the selected socket. The ordering of this array depends on the order the sockets were added to a given fanout group, so for FANOUT_CPU this means sockets are bound to cpus in the order they are configured, which is OK. However, when stopping then restarting the interface these sockets are bound to, the sockets are reassigned to the fanout group in the reverse order, due to the fact that they were inserted at the head of the interface's AF_PACKET socket list. This means that traffic that was directed to the first socket in the fanout group is now directed to the last one after an interface restart. In the case of FANOUT_CPU, traffic from CPU0 will be directed to the socket that used to receive traffic from the last CPU after an interface restart. This commit introduces a helper to add a socket at the tail of a list, then uses it to register AF_PACKET sockets. Note that this changes the order in which sockets are listed in /proc and with sock_diag. Fixes: dc99f600 ("packet: Add fanout support") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Zhiqiang Liu authored
Commit ad6c9986 ("vxlan: Fix GRO cells race condition between receive and link delete") fixed a race condition for the typical case a vxlan device is dismantled from the current netns. But if a netns is dismantled, vxlan_destroy_tunnels() is called to schedule a unregister_netdevice_queue() of all the vxlan tunnels that are related to this netns. In vxlan_destroy_tunnels(), gro_cells_destroy() is called and finished before unregister_netdevice_queue(). This means that the gro_cells_destroy() call is done too soon, for the same reasons explained in above commit. So we need to fully respect the RCU rules, and thus must remove the gro_cells_destroy() call or risk use after-free. Fixes: 58ce31cc ("vxlan: GRO support at tunnel layer") Signed-off-by: Suanming.Mou <mousuanming@huawei.com> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 18 Mar, 2019 7 commits
-
-
Dmitry Bogdanov authored
TCP/UDP checksum validity was propagated to skb only if IP checksum is valid. But for IPv6 there is no validity as there is no checksum in IPv6. This patch propagates TCP/UDP checksum validity regardless of IP checksum. Fixes: 018423e9 ("net: ethernet: aquantia: Add ring support code") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Finn Thain authored
The bug that Stan reported is as follows. After a restart, a 16-bit NIC may be incorrectly identified as a 32-bit NIC and stop working. mac8390 slot.E: Memory length resource not found, probing mac8390 slot.E: Farallon EtherMac II-C (type farallon) mac8390 slot.E: MAC 00:00:c5:30:c2:99, IRQ 61, 32 KB shared memory at 0xfeed0000, 32-bit access. The bug never arises after a cold start and only intermittently after a warm start. (I didn't investigate why the bug is intermittent.) It turns out that memcpy_toio() is deprecated and memcmp_withio() also has issues. Replacing these calls with mmio accessors fixes the problem. Reported-and-tested-by: Stan Johnson <userm57@yahoo.com> Fixes: 2964db0f ("m68k: Mac DP8390 update") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matteo Croce authored
Similarly to commit a7603ac1 ("geneve: change NET_UDP_TUNNEL dependency to select"), GTP has a dependency on NET_UDP_TUNNEL which makes impossible to compile it if no other protocol depending on NET_UDP_TUNNEL is selected. Fix this by changing the depends to a select, and drop NET_IP_TUNNEL from the select list, as it already depends on NET_UDP_TUNNEL. Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
rose_write_internal() uses a temp buffer of 100 bytes, but a manual inspection showed that given arbitrary input, rose_create_facilities() can fill up to 110 bytes. Lets use a tailroom of 256 bytes for peace of mind, and remove the bounce buffer : we can simply allocate a big enough skb and adjust its length as needed. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:352 [inline] BUG: KASAN: stack-out-of-bounds in rose_create_facilities net/rose/rose_subr.c:521 [inline] BUG: KASAN: stack-out-of-bounds in rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116 Write of size 7 at addr ffff88808b1ffbef by task syz-executor.0/24854 CPU: 0 PID: 24854 Comm: syz-executor.0 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:131 memcpy include/linux/string.h:352 [inline] rose_create_facilities net/rose/rose_subr.c:521 [inline] rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116 rose_connect+0x7cb/0x1510 net/rose/af_rose.c:826 __sys_connect+0x266/0x330 net/socket.c:1685 __do_sys_connect net/socket.c:1696 [inline] __se_sys_connect net/socket.c:1693 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1693 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458079 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f47b8d9dc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458079 RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f47b8d9e6d4 R13: 00000000004be4a4 R14: 00000000004ceca8 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00022c7fc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff022c0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88808b1ffa80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808b1ffb00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 03 >ffff88808b1ffb80: f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 04 f3 ^ ffff88808b1ffc00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808b1ffc80: 00 00 00 00 00 00 00 f1 f1 f1 f1 f1 f1 01 f2 01 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tobias Klauser authored
Use https and link to the patch directly. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Erik Hugne authored
We move the check that prevents connecting service ranges to after the RDM/DGRAM check, and move address sanity control to a separate function that also validates the service range. Fixes: 23998835 ("tipc: improve address sanity check in tipc_connect()") Signed-off-by: Erik Hugne <erik.hugne@gmail.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Fix documentation markup warnings in snmp_counter.rst: Documentation/networking/snmp_counter.rst:416: WARNING: Title underline too short. Documentation/networking/snmp_counter.rst:684: WARNING: Bullet list ends without a blank line; unexpected unindent. Documentation/networking/snmp_counter.rst:693: WARNING: Title underline too short. Documentation/networking/snmp_counter.rst:707: WARNING: Bullet list ends without a blank line; unexpected unindent. Documentation/networking/snmp_counter.rst:712: WARNING: Bullet list ends without a blank line; unexpected unindent. Documentation/networking/snmp_counter.rst:722: WARNING: Title underline too short. Documentation/networking/snmp_counter.rst:733: WARNING: Bullet list ends without a blank line; unexpected unindent. Documentation/networking/snmp_counter.rst:736: WARNING: Bullet list ends without a blank line; unexpected unindent. Documentation/networking/snmp_counter.rst:739: WARNING: Bullet list ends without a blank line; unexpected unindent. Fixes: 80cc4950 ("net: Add part of TCP counts explanations in snmp_counters.rst") Fixes: 8e2ea53a ("add snmp counters document") Fixes: a6c7c7aa ("net: add document for several snmp counters") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: yupeng <yupeng0921@gmail.com>
-
- 17 Mar, 2019 1 commit
-
-
Kangjie Lu authored
nla_nest_start may fail. The fix check its status and returns -EMSGSIZE in case it fails. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 Mar, 2019 1 commit
-
-
Eric Dumazet authored
In my latest patch I missed one rcu_read_unlock(), in case device is down. Fixes: 4477138f ("tun: properly test for IFF_UP") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-