This patch introduces fi->i_sem to protect fi's info that includes xattr_ver,
pino, i_nlink.
This enables to remove i_mutex during f2fs_sync_file, resulting in performance
improvement when a number of fsync calls are triggered from many concurrent
threads.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

It is more reasonable to determine the reclaiming rate of prefree segments
according to the volume size, which is set to 5% by default.
For example, if the volume is 128GB, the prefree segments are reclaimed
when the number reaches to 6.4GB.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds missing dir_level documentation.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

The NM_WOUT_THRESHOLD is now obsolete since f2fs starts to control on a basis
of the memory footprint.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces ram_thresh, a sysfs entry, which controls the memory
footprint used by the free nid list and the nat cache.

Previously, the free nid list was controlled by MAX_FREE_NIDS, while the nat
cache was managed by NM_WOUT_THRESHOLD.
However, this approach cannot be applied dynamically according to the system.

So, this patch adds ram_thresh that users can specify the threshold, which is
in order of 1 / 1024.
For example, if the total ram size is 4GB and the value is set to 10 by default,
f2fs tries to control the number of free nids and nat caches not to consume over
10 * (4GB / 1024) = 10MB.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

The try_to_free_nats should not receive the negative nr_shrink.
Otherwise, it can drop all the nat entries by the while loop.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

If a page is on writeback, f2fs can face with deadlock due to under writepages.
This is caused by merging IOs inside f2fs, so if it comes to detect, let's throw
merged IOs, which is implemented by f2fs_wait_on_page_writeback.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces nr_pages_to_write to align page writes to the segment
or other operational unit size, which can be tuned according to the system
environment.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This patch increases pages_skipped when skipping writepages.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces nr_pages_to_skip(sbi, type) to determine writepages can
be skipped.
The dentry, node, and meta pages can be conrolled by F2FS without breaking the
FS consistency.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

The get_dirty_dents gives us the number of dirty dentry pages.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

Previously 'background_gc={on***,off***}' is being parsed as correct option,
with this patch we cloud fix the trivial bug in mount process.

Change log from v1:
 o need to check length of parameter suggested by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

We should return error number of read_normal_summaries instead of -EINVAL when
read_normal_summaries failed.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces a help function f2fs_has_xattr_block for better
readability.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

The original segment_info's show looks out-of-format:
cat /proc/fs/f2fs/loop0/segment_info
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 512
512 512 512 512 512 512 512 0 0 512
348 0 263 0 0 512 0 0 512 512
512 512 0 512 512 512 512 512 512 512
512 512 511 328 512 512 512 512 512 512
512 512 512 512 512 512 512 0 0 175

Let's fix this and show type for each segment.
cat /proc/fs/f2fs/loop0/segment_info
format: segment_type|valid_blocks
segment_type(0:HD, 1:WD, 2:CD, 3:HN, 4:WN, 5:CN)
0    2|0   1|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0
10   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0
20   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0
30   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0
40   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0   0|0
50   3|0   3|0   3|0   3|0   3|0   3|0   3|0   0|0   3|0   3|0
60   3|0   3|0   3|0   3|0   3|0   3|0   3|0   3|0   3|0   3|512
70   3|512 3|512 3|512 3|512 3|512 3|512 3|512 3|0   3|0   3|512
80   3|0   3|0   3|0   3|0   3|0   3|512 3|0   3|0   3|512 3|512
90   3|512 0|512 3|274 0|512 0|512 0|512 0|512 0|512 0|512 3|512
100  3|512 0|512 3|511 0|328 3|512 0|512 0|512 3|512 0|512 0|512
110  0|512 0|512 0|512 0|512 0|512 0|512 0|512 5|0   4|0   3|512
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

Upper bound checking of ino should be added to f2fs_nfs_get_inode, so unneeded
process before do_read_inode in f2fs_iget could be avoided when ino is invalid.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces a help function f2fs_has_inline_xattr for better
readability.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

Previously we do not recover inline xattr data of inode after power-cut, so
inline xattr data may be lost.
We should recover the data during the roll-forward process.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

Previously, we ra_sum_pages to pre-read contiguous pages as more
as possible, and if we fail to alloc more pages, an ENOMEM error
will be reported upstream, even though we have alloced some pages
yet. In fact, we can use the available pages to do the job partly,
and continue the rest in the following circle. Only reporting ENOMEM
upstream if we really can not alloc any available page.

And another fix is ignoring dealing with the following pages if an
EIO occurs when reading page from page_list.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: modify the flow for better neat code]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

The original segment_info's show is a bit out-of-format:

[root@guz Demoes]# cat /proc/fs/f2fs/loop0/segment_info
0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
......
0 0 0 0 0 0 0 0 0 0
0 0 1 0 0 1 [root@guz Demoes]#

so we fix it here for better legibility.
[root@guz Demoes]# cat /proc/fs/f2fs/loop0/segment_info
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
......
0 0 0 0 0 0 0 0 0 0
0 0 1 0 0 1
[root@guz Demoes]#
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

Integrated a couple of minor changes for better readability suggested by
Chao Yu.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This patch includes a simple fix to adjust coding style.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This patch fixes performance regression of dbench reported by
Alex <hbx7d@yandex.com>.

This issue was revealed by Phoronix tests results:
http://www.phoronix.com/scan.php?page=article&item=linux_314_ssdfs&num=2

It turns out that we need to assign WRITE_SYNC to the node writes, if
fsync is triggered.

The performance numbers are like below, which is measured by Alex.
1. 355MB/s       ext4
2. 225MB/s       f2fs : WRITE for node writes
3. 525MB/s       f2fs : WRITE_SYNC for node writes

Reported-And-Tested-by: Alex <hbx7d@yandex.com>.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

We should de-account dirty counters for page when redirty in ->writepage().

Wu Fengguang described in 'commit 971767ca':
"writeback: fix dirtied pages accounting on redirty
De-account the accumulative dirty counters on page redirty.

Page redirties (very common in ext4) will introduce mismatch between
counters (a) and (b)

a) NR_DIRTIED, BDI_DIRTIED, tsk->nr_dirtied
b) NR_WRITTEN, BDI_WRITTEN

This will introduce systematic errors in balanced_rate and result in
dirty page position errors (ie. the dirty pages are no longer balanced
around the global/bdi setpoints)."
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This patch use existing macro F2FS_INODE/NEXT_FREE_BLKADDR to clean up some
codes.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

If there are multi segments in one section, we will read those SSA blocks which
have contiguous address one by one in f2fs_gc. It may lost performance, let's
read ahead SSA blocks by merge multi read request.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds an sysfs entry to control dir_level used by the large directory.

The description of this entry is:

 dir_level                    This parameter controls the directory level to
			      support large directory. If a directory has a
			      number of files, it can reduce the file lookup
			      latency by increasing this dir_level value.
			      Otherwise, it needs to decrease this value to
			      reduce the space overhead. The default value is 0.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces an i_dir_level field to support large directory.

Previously, f2fs maintains multi-level hash tables to find a dentry quickly
from a bunch of chiild dentries in a directory, and the hash tables consist of
the following tree structure as below.

In Documentation/filesystems/f2fs.txt,

----------------------
A : bucket
B : block
N : MAX_DIR_HASH_DEPTH
----------------------

level #0   | A(2B)
           |
level #1   | A(2B) - A(2B)
           |
level #2   | A(2B) - A(2B) - A(2B) - A(2B)
     .     |   .       .       .       .
level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
     .     |   .       .       .       .
level #N   | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B)

But, if we can guess that a directory will handle a number of child files,
we don't need to traverse the tree from level #0 to #N all the time.
Since the lower level tables contain relatively small number of dentries,
the miss ratio of the target dentry is likely to be high.

In order to avoid that, we can configure the hash tables sparsely from level #0
like this.

level #0   | A(2B) - A(2B) - A(2B) - A(2B)

level #1   | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
     .     |   .       .       .       .
level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B)
     .     |   .       .       .       .
level #N   | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B)

With this structure, we can skip the ineffective tree searches in lower level
hash tables.

This patch adds just a facility for this by introducing i_dir_level in
f2fs_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

It turns out that a bit operation like find_next_bit is not always fast enough
for f2fs_find_entry.
Instead, it is pretty much simple and fast to traverse each dentries.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

The stat_show is just to show the current status of f2fs.
So, we can remove all the there-in locks.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces a radix tree for the list of free_nids, which enhances
the performance on free nid management.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

Introduce help macro on_build_free_nids() which just uses build_lock
to judge whether the building free nid is going, so that we can remove
the on_build_free_nids field from f2fs_sb_info.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
[Jaegeuk Kim: remove an unnecessary white line removal]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

The nat cache entry maintains a status whether it is checkpointed or not.
So, if a new cache entry is loaded from the last checkpoint,
nat_entry->checkpointed should be true.
If the cache entry is modified as being dirty, nat_entry->checkpoint should
be false.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

At the end of the recovery procedure, write_checkpoint is called and updates
the cp count which is managed by f2fs stat.
But, previously build_stat() is called after the recovery procedure, which
results in:

BUG: unable to handle kernel NULL pointer dereference at 000000000000012c
IP: [<ffffffffa03b1030>] write_checkpoint+0x720/0xbc0 [f2fs]
Call Trace:
 [<ffffffff810a6b44>] ? mark_held_locks+0x74/0x140
 [<ffffffff8109a3e0>] ? __init_waitqueue_head+0x60/0x60
 [<ffffffffa03bf036>] recover_fsync_data+0x656/0xf20 [f2fs]
 [<ffffffff812ee3eb>] ? security_d_instantiate+0x1b/0x30
 [<ffffffffa03aeb4d>] f2fs_fill_super+0x94d/0xa00 [f2fs]
 [<ffffffff811a9825>] mount_bdev+0x1a5/0x1f0
 [<ffffffff8114915e>] ? __get_free_pages+0xe/0x40
 [<ffffffffa03ae200>] ? f2fs_remount+0x130/0x130 [f2fs]
 [<ffffffffa03aa575>] f2fs_mount+0x15/0x20 [f2fs]
 [<ffffffff811aa713>] mount_fs+0x43/0x1b0
 [<ffffffff811c7124>] vfs_kern_mount+0x74/0x160
 [<ffffffff811c5cb1>] ? __get_fs_type+0x51/0x60
 [<ffffffff811c9727>] do_mount+0x237/0xb50
 [<ffffffff811c936a>] ? copy_mount_options+0x3a/0x170

So, this patche changes the order of recovery_fsync_data() and
f2fs_build_stats().
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

Even if f2fs_write_data_page is called by the page reclaiming path, we should
not write the page to provide enough free segments for the worst case scenario.
Otherwise, f2fs can face with no free segment while gc is conducted, resulting
in:

 ------------[ cut here ]------------
 kernel BUG at /home/zeus/f2fs_test/src/fs/f2fs/segment.c:565!
 RIP: 0010:[<ffffffffa02c3b11>]  [<ffffffffa02c3b11>] new_curseg+0x331/0x340 [f2fs]
 Call Trace:
  allocate_segment_by_default+0x204/0x280 [f2fs]
  allocate_data_block+0x108/0x210 [f2fs]
  write_data_page+0x8a/0xc0 [f2fs]
  do_write_data_page+0xe1/0x2a0 [f2fs]
  move_data_page+0x8a/0xf0 [f2fs]
  f2fs_gc+0x446/0x970 [f2fs]
  f2fs_balance_fs+0xb6/0xd0 [f2fs]
  f2fs_write_begin+0x50/0x350 [f2fs]
  ? unlock_page+0x27/0x30
  ? unlock_page+0x27/0x30
  generic_file_buffered_write+0x10a/0x280
  ? file_update_time+0xa3/0xf0
  __generic_file_aio_write+0x1c8/0x3d0
  ? generic_file_aio_write+0x52/0xb0
  ? generic_file_aio_write+0x52/0xb0
  generic_file_aio_write+0x65/0xb0
  do_sync_write+0x5a/0x90
  vfs_write+0xc5/0x1f0
  SyS_write+0x55/0xa0
  system_call_fastpath+0x16/0x1b
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

Total nids that f2fs can use should not include 0, nid for node inode, and nid
for meta inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This patch shows the counts of checkpoint in f2fs' status.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This patch help us to cleanup the readahead code by merging ra_{sit,nat}_pages
function into ra_meta_pages.
Additionally the new function is used to readahead cp block in
recover_orphan_inodes.

Change log from v1:
 o fix a deadloop bug pointed by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

Previously without protection of inode mutex, f2fs_falloc and other data
correlated operations will interfere with each other.
So let's use inode mutex to keep atomicity of f2fs_falloc.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>