- 03 Jan, 2009 16 commits
-
-
Weidong Han authored
Signed-off-by:
Weidong Han <weidong.han@intel.com> Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com>
-
Weidong Han authored
Signed-off-by:
-
Weidong Han authored
It's random number after the domain is allocated by kmem_cache_alloc Signed-off-by:
-
Yu Zhao authored
On platforms with multiple PCI segments, any of the segments can have a DRHD with INCLUDE_PCI_ALL flag. So need to check the DRHD's segment number against the PCI device's when searching its DRHD. Signed-off-by:
Yu Zhao <yu.zhao@intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Mark McLoughlin authored
Signed-off-by:
Mark McLoughlin <markmc@redhat.com> Signed-off-by:
-
Mark McLoughlin authored
Some macros were unused, so I just dropped them: context_fault_disable context_translation_type context_address_root context_address_width context_domain_id Signed-off-by:
-
Mark McLoughlin authored
Signed-off-by:
-
Mark McLoughlin authored
This is only used in dmar.c and intel-iommu.h, so dma_remapping.h seems like the appropriate place for it. Signed-off-by:
-
Mark McLoughlin authored
Signed-off-by:
-
Mark McLoughlin authored
Signed-off-by:
-
Mark McLoughlin authored
DMA_PTE_READ/WRITE are needed by kvm. Signed-off-by:
-
Mark McLoughlin authored
Signed-off-by:
-
Mark McLoughlin authored
We keep the struct root_entry forward declaration for the pointer in struct intel_iommu. Signed-off-by:
-
Mark McLoughlin authored
Signed-off-by:
-
Mark McLoughlin authored
init_dmars() is not used outside of drivers/pci/intel-iommu.c Signed-off-by:
-
Mark McLoughlin authored
The seg, saved_msg and sysdev fields appear to be unused since before the code was first merged. linux/msi.h is not needed in linux/intel-iommu.h anymore since there is no longer a reference to struct msi_msg. The MSI code in drivers/pci/intel-iommu.c still has linux/msi.h included via linux/dmar.h. linux/sysdev.h isn't needed because there is no reference to struct sys_device. Signed-off-by:
-
- 02 Jan, 2009 24 commits
-
-
Ingo Molnar authored
GCC 3.0 and 3.1 are too old to build a working kernel. Signed-off-by:
Ingo Molnar <mingo@elte.hu> [ This check got dropped as obsolete when I simplified the gcc header inclusion mess in f153b821, but Willy Tarreau reports actually having those old versions still.. -Linus ] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits) x86: export vector_used_by_percpu_irq x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and() sched: nominate preferred wakeup cpu, fix x86: fix lguest used_vectors breakage, -v2 x86: fix warning in arch/x86/kernel/io_apic.c sched: fix warning in kernel/sched.c sched: move test_sd_parent() to an SMP section of sched.h sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0 sched: activate active load balancing in new idle cpus sched: bias task wakeups to preferred semi-idle packages sched: nominate preferred wakeup cpu sched: favour lower logical cpu number for sched_mc balance sched: framework for sched_mc/smt_power_savings=N sched: convert BALANCE_FOR_xx_POWER to inline functions x86: use possible_cpus=NUM to extend the possible cpus allowed x86: fix cpu_mask_to_apicid_and to include cpu_online_mask x86: update io_apic.c to the new cpumask code x86: Introduce topology_core_cpumask()/topology_thread_cpumask() x86: xen: use smp_call_function_many() x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c ... Fixed up trivial conflict in kernel/time/tick-sched.c manually
-
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvmLinus Torvalds authored
* 'kvm-updates/2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (140 commits) KVM: MMU: handle large host sptes on invlpg/resync KVM: Add locking to virtual i8259 interrupt controller KVM: MMU: Don't treat a global pte as such if cr4.pge is cleared MAINTAINERS: Maintainership changes for kvm/ia64 KVM: ia64: Fix kvm_arch_vcpu_ioctl_[gs]et_regs() KVM: x86: Rework user space NMI injection as KVM_CAP_USER_NMI KVM: VMX: Fix pending NMI-vs.-IRQ race for user space irqchip KVM: fix handling of ACK from shared guest IRQ KVM: MMU: check for present pdptr shadow page in walk_shadow KVM: Consolidate userspace memory capability reporting into common code KVM: Advertise the bug in memory region destruction as fixed KVM: use cpumask_var_t for cpus_hardware_enabled KVM: use modern cpumask primitives, no cpumask_t on stack KVM: Extract core of kvm_flush_remote_tlbs/kvm_reload_remote_mmus KVM: set owner of cpu and vm file operations anon_inodes: use fops->owner for module refcount x86: KVM guest: kvm_get_tsc_khz: return khz, not lpj KVM: MMU: prepopulate the shadow on invlpg KVM: MMU: skip global pgtables on sync due to cr3 switch KVM: MMU: collapse remote TLB flushes on root sync ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (32 commits) ide-atapi: start dma in a drive-specific way ide-atapi: put the rest of non-ide-cd code into the else-clause of ide_transfer_pc ide-atapi: remove timeout arg to ide_issue_pc ide-cd: remove handler wrappers ide-cd: remove xferlen arg to cdrom_start_packet_command ide-atapi: split drive-specific functionality in ide_issue_pc ide-atapi: assign expiry and timeout based on device type ide-atapi: compute cmd_len based on device type in ide_transfer_pc ide: remove the last ide-scsi remnants ide-atapi: remove ide-scsi remnants from ide_pc_intr() ide-atapi: remove ide-scsi remnants from ide_transfer_pc() ide-atapi: remove ide-scsi remnants from ide_issue_pc ide-cd: move cdrom_timer_expiry to ide-atapi.c ide-atapi: teach ide atapi about drive->waiting_for_dma ide-atapi: accomodate transfer length calculation for ide-cd ide-atapi: setup dma for ide-cd ide-atapi: combine drive-specific assignments ide-atapi: add a dev_is_idecd-inline remove ide-scsi ide-floppy: allocate only toplevel packet commands ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwbLinus Torvalds authored
* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: (31 commits) uwb: remove beacon cache entry after calling uwb_notify() uwb: remove unused include/linux/uwb/debug.h uwb: use print_hex_dump() uwb: use dev_dbg() for debug messages uwb: fix memory leak in uwb_rc_notif() wusb: fix oops when terminating a non-existant reservation uwb: fix oops when terminating an already terminated reservation uwb: improved MAS allocator and reservation conflict handling wusb: add debug files for ASL, PZL and DI to the whci-hcd driver uwb: fix oops in debug PAL's reservation callback uwb: clean up whci_wait_for() timeout error message wusb: whci-hcd shouldn't do ASL/PZL updates while channel is inactive uwb: remove unused beacon group join/leave events wlp: start/stop radio on network interface up/down uwb: add basic radio manager uwb: add pal parameter to new reservation callback uwb: fix races between events and neh timers uwb: don't unbind the radio controller driver when resetting uwb: per-radio controller event thread and beacon cache uwb: add commands to add/remove IEs to the debug interface ...
-
Paul Mackerras authored
Ben Herrenschmidt is taking over as the primary powerpc architecture maintainer. I'll still be around as his backup/deputy. Signed-off-by:
Paul Mackerras <paulus@samba.org> Acked-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Linus Torvalds authored
* i8k-updates: i8k: Add Dell Vostro systems i8k: Enable i8k on Dell Precision Systems
-
Federico Heinz authored
This trivial patch adds support for i8k on the new Dell Vostro models. I tested it on my Vostro 1400, and it works. It does print a warning when loading the module: i8k: unable to get SMM BIOS version But I couldn't figure out how to fix that. The module seems to work fine, anyway... Signed-off-by:
Federico Heinz <fheinz@vialibre.org.ar> Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Andy Spencer authored
Patch to enable i8k on Dell Precisions. Signed-off-by:
Andy Spencer <spenceal@rose-hulman.edu> Signed-off-by:
-
Ingo Brueckl authored
Signed-off-by:
Ingo Brueckl <ib@wupperonline.de> Signed-off-by:
-
Linus Torvalds authored
* tty-updates: (75 commits) serial_8250: support for Sealevel Systems Model 7803 COMM+8 hso maintainers update patch hso modem detect fix patch against Alan Cox'es tty tree tty: Fix an ircomm warning and note another bug drivers/char/cyclades.c: cy_pci_probe: fix error path Serial: UART driver changes for Cavium OCTEON. Serial: Allow port type to be specified when calling serial8250_register_port. 8250: Serial driver changes to support future Cavium OCTEON serial patches. 8250: Don't clobber spinlocks. fix for tty-serial-move-port tty: We want the port object to be persistent __FUNCTION__ is gcc-specific, use __func__ serial: RS485 ioctl structure uses __u32 include linux/types.h tty: Drop the lock_kernel in the private ioctl hook synclink_cs: Convert to tty_port tty: use port methods for the rocket driver tty: kref the rocket driver tty: make rocketport use standard port->flags tty: Redo the rocket driver locking tty: Make epca use the port helpers ...
-
Flavio Leitner authored
Add support for Sealevel Systems Model 7803 COMM+8 Signed-off-by:
Flavio Leitner <fleitner@redhat.com> Signed-off-by:
-
Denis Joseph Barrow authored
Added D.J. Barrow as maintainer of hso driver. Signed-off-by:
Denis Joseph Barrow <D.Barow@option.com> Signed-off-by:
-
Denis Joseph Barrow authored
Fixed incorrect check for the modem port, this prevents crashes caused by issueing a tiocmget_submit_urb on endpoints which don't exist for non modem devices. Signed-off-by:
-
Alan Cox authored
Roel Kluin noted that line is unsigned so one test is unneccessary. Also add a warning for another flaw I noticed while making this change. Signed-off-by:
-
Andrew Morton authored
We forgot to release resources in one case. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=12137Reported-by:
Florian Lohoff <flo@rfc822.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
David Daney authored
Cavium UART implementation is not covered by existing uart_configS. Define a new uart_config (PORT_OCTEON) which is specified by OCTEON platform device registration code. Signed-off-by:
Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by:
David Daney <ddaney@caviumnetworks.com> Signed-off-by:
-
David Daney authored
Add flag value UPF_FIXED_TYPE which specifies that the UART type is known and should not be probed. For this case the UARTs properties are just copied out of the uart_config entry. This allows us to keep SOC specific 8250 probe code out of 8250.c. In this case we know the serial hardware will not be changing as it is on the same silicon as the CPU, and we can specify it with certainty in the board/cpu setup code. The alternative is to load up 8250.c with a bunch of OCTEON specific special cases in the probing code. Signed-off-by:
-
David Daney authored
In order to use Cavium OCTEON specific serial i/o drivers, we first patch the 8250 driver to use replaceable I/O functions. Compatible I/O functions are added for existing iotypeS. An added benefit of this change is that it makes it easy to factor some of the existing special cases out to board/SOC specific support code. The alternative is to load up 8250.c with a bunch of OCTEON specific iotype code and bug work-arounds. Signed-off-by:
-
David Daney authored
In serial8250_isa_init_ports(), the port's lock is initialized. We should not overwrite it. In early_serial_setup(), only copy in the fields we need. Since the early console code only uses a subset of the fields, these are sufficient. Signed-off-by:
-
Alexander Beregalov authored
Hi Alan next-20081204 crashes with the following message: BUG: unable to handle kernel paging request at ffff88007d320248 IP: [<ffffffff803de934>] uart_remove_one_port+0xef/0x111 kfree(info); 393: 49 8d 7d 10 lea 0x10(%r13),%rdi 397: e8 00 00 00 00 callq 39c <uart_remove_one_port+0xef> Signed-off-by:Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by:
-
Alan Cox authored
Move the tty_port and uart_info bits around a little. By embedding the uart_info into the uart_port we get rid of lots of corner case testing and also get the ability to go port<->state<->info which is a bit more elegant than the current data structures. Downsides - we allocate a tiny bit more memory for unused ports, upside we've removed as much code as it saved for most users.. Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Andy Whitcroft authored
In the commit below a new struct serial_rs485 was introduced for a new ioctl: commit c26c56c0 Author: Alan Cox <alan@redhat.com> Date: Mon Oct 13 10:37:48 2008 +0100 tty: Cris has a nice RS485 ioctl so we should steal it This structure uses the __u32 types for some of its members, which leads to the following compile error: $ cc -I.../include -c X.c In file included from X.c:2: .../include/linux/serial.h:185: error: expected specifier-qualifier-list before ‘__u32’ $ It seems that these types are appropriate for this structure as it is to be exposed to userspace. These types are available via linux/types.h so move the include of that outside the __KERNEL__ section. Signed-off-by:Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
