- 23 Jun, 2024 3 commits
-
-
Enguerrand de Ribaucourt authored
Errata DS80000758 states that carrier sense back pressure mode can cause link down issues in 100BASE-TX half duplex mode. The datasheet also recommends to always use the collision based back pressure mode. Fixes: b987e98e ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by:
Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Reviewed-by:
Woojung Huh <Woojung.huh@microchip.com> Acked-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Enguerrand de Ribaucourt authored
PHY_ID_KSZ9477 was supported but not added to the device table passed to MODULE_DEVICE_TABLE. Fixes: fc3973a1 ("phy: micrel: add Microchip KSZ 9477 Switch PHY support") Signed-off-by:
-
Kory Maincent authored
Not all PSE attributes are used for the pse-set netlink command. Select only the ones used by ethtool. Fixes: f8586411 ("netlink: specs: Expand the pse netlink command with PoE interface") Signed-off-by:
Kory Maincent <kory.maincent@bootlin.com> Reviewed-by:
Donald Hunter <donald.hunter@gmail.com> Signed-off-by:
-
- 22 Jun, 2024 4 commits
-
-
Nick Child authored
There are 2 types of outstanding tx skb's: Type 1: Packets that are sitting in the drivers ind_buff that are waiting to be batch sent to the NIC. During a device reset, these are freed with a call to ibmvnic_tx_scrq_clean_buffer() Type 2: Packets that have been sent to the NIC and are awaiting a TX completion IRQ. These are free'd during a reset with a call to clean_tx_pools() During any reset which requires us to free the tx irq, ensure that the Type 2 skb references are freed. Since the irq is released, it is impossible for the NIC to inform of any completions. Furthermore, later in the reset process is a call to init_tx_pools() which marks every entry in the tx pool as free (ie not outstanding). So if the driver is to make a call to init_tx_pools(), it must first be sure that the tx pool is empty of skb references. This issue was discovered by observing the following in the logs during EEH testing: TX free map points to untracked skb (tso_pool 0 idx=4) TX free map points to untracked skb (tso_pool 0 idx=5) TX free map points to untracked skb (tso_pool 1 idx=36) Fixes: 65d6470d ("ibmvnic: clean pending indirect buffs during reset") Signed-off-by:
Nick Child <nnac123@linux.ibm.com> Signed-off-by:
-
git://git.open-mesh.org/linux-mergeJakub Kicinski authored
Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - Don't accept TT entries for out-of-spec VIDs, by Sven Eckelmann - Revert "batman-adv: prefer kfree_rcu() over call_rcu() with free-only callbacks", by Linus Lüssing * tag 'batadv-net-pullrequest-20240621' of git://git.open-mesh.org/linux-merge: Revert "batman-adv: prefer kfree_rcu() over call_rcu() with free-only callbacks" batman-adv: Don't accept TT entries for out-of-spec VIDs ==================== Link: https://patch.msgid.link/20240621143915.49137-1-sw@simonwunderlich.deSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-6.10-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2024-06-21 The first patch is by Oleksij Rempel, it enhances the error handling for tightly received RTS message in the j1939 protocol. Shigeru Yoshida's patch fixes a kernel information leak in j1939_send_one() in the j1939 protocol. Followed by a patch by Oleksij Rempel for the j1939 protocol, to properly recover from a CAN bus error during BAM transmission. A patch by Chen Ni properly propagates errors in the kvaser_usb driver. The last patch is by Vitor Soares, that fixes an infinite loop in the mcp251xfd driver is SPI async sending fails during xmit. * tag 'linux-can-fixes-for-6.10-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: mcp251xfd: fix infinite loop when xmit fails can: kvaser_usb: fix return value for hif_usb_send_regout net: can: j1939: recover socket queue on CAN bus error during BAM transmission net: can: j1939: Initialize unused data in j1939_send_one() net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new ==================== Link: https://patch.msgid.link/20240621121739.434355-1-mkl@pengutronix.deSigned-off-by:
-
Guillaume Nault authored
Ensure the inner IP header is part of the skb's linear data before setting old_iph. Otherwise, on a non-linear skb, old_iph could point outside of the packet data. Unlike classical VXLAN, which always encapsulates Ethernet packets, VXLAN-GPE can transport IP packets directly. In that case, we need to look at skb->protocol to figure out if an Ethernet header is present. Fixes: d342894c ("vxlan: virtual extensible lan") Signed-off-by:
Guillaume Nault <gnault@redhat.com> Link: https://patch.msgid.link/2aa75f6fa62ac9dbe4f16ad5ba75dd04a51d4b99.1718804000.git.gnault@redhat.comSigned-off-by:
-
- 21 Jun, 2024 17 commits
-
-
David S. Miller authored
Petr Machata says: ==================== mlxsw: Fixes This patchset fixes an issue with mlxsw driver initialization, and a memory corruption issue in shared buffer occupancy handling. v3: - Drop the core thermal fix, it's not relevant anymore. ==================== Signed-off-by: -
Ido Schimmel authored
The following two shared buffer operations make use of the Shared Buffer Status Register (SBSR): # devlink sb occupancy snapshot pci/0000:01:00.0 # devlink sb occupancy clearmax pci/0000:01:00.0 The register has two masks of 256 bits to denote on which ingress / egress ports the register should operate on. Spectrum-4 has more than 256 ports, so the register was extended by cited commit with a new 'port_page' field. However, when filling the register's payload, the driver specifies the ports as absolute numbers and not relative to the first port of the port page, resulting in memory corruptions [1]. Fix by specifying the ports relative to the first port of the port page. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0 Read of size 1 at addr ffff8881068cb00f by task devlink/1566 [...] Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0 mlxsw_devlink_sb_occ_snapshot+0x75/0xb0 devlink_nl_sb_occ_snapshot_doit+0x1f9/0x2a0 genl_family_rcv_msg_doit+0x20c/0x300 genl_rcv_msg+0x567/0x800 netlink_rcv_skb+0x170/0x450 genl_rcv+0x2d/0x40 netlink_unicast+0x547/0x830 netlink_sendmsg+0x8d4/0xdb0 __sys_sendto+0x49b/0x510 __x64_sys_sendto+0xe5/0x1c0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [...] Allocated by task 1: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 copy_verifier_state+0xbc2/0xfb0 do_check_common+0x2c51/0xc7e0 bpf_check+0x5107/0x9960 bpf_prog_load+0xf0e/0x2690 __sys_bpf+0x1a61/0x49d0 __x64_sys_bpf+0x7d/0xc0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x109/0x170 __kasan_slab_free+0x14/0x30 kfree+0xca/0x2b0 free_verifier_state+0xce/0x270 do_check_common+0x4828/0xc7e0 bpf_check+0x5107/0x9960 bpf_prog_load+0xf0e/0x2690 __sys_bpf+0x1a61/0x49d0 __x64_sys_bpf+0x7d/0xc0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: f8538aec ("mlxsw: Add support for more than 256 ports in SBSR register") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
Ido Schimmel authored
Cited commit added support for a new reset flow ("all reset") which is deeper than the existing reset flow ("software reset") and allows the device's PCI firmware to be upgraded. In the new flow the driver first tells the firmware that "all reset" is required by issuing a new reset command (i.e., MRSR.command=6) and then triggers the reset by having the PCI core issue a secondary bus reset (SBR). However, due to a race condition in the device's firmware the device is not always able to recover from this reset, resulting in initialization failures [1]. New firmware versions include a fix for the bug and advertise it using a new capability bit in the Management Capabilities Mask (MCAM) register. Avoid initialization failures by reading the new capability bit and triggering the new reset flow only if the bit is set. If the bit is not set, trigger a normal PCI hot reset by skipping the call to the Management Reset and Shutdown Register (MRSR). Normal PCI hot reset is weaker than "all reset", but it results in a fully operational driver and allows users to flash a new firmware, if they want to. [1] mlxsw_spectrum4 0000:01:00.0: not ready 1023ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 2047ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 4095ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 8191ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 16383ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 32767ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 65535ms after bus reset; giving up mlxsw_spectrum4 0000:01:00.0: PCI function reset failed with -25 mlxsw_spectrum4 0000:01:00.0: cannot register bus device mlxsw_spectrum4: probe of 0000:01:00.0 failed with error -25 Fixes: f257c73e ("mlxsw: pci: Add support for new reset flow") Reported-by:Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by:
-
Kuniyuki Iwashima authored
diag_uid selftest failed on NIPA where the received nlmsg_type is NLMSG_ERROR [0] because CONFIG_UNIX_DIAG is not set [1] by default and sock_diag_lock_handler() failed to load the module. # # Starting 2 tests from 2 test cases. # # RUN diag_uid.uid.1 ... # # diag_uid.c:159:1:Expected nlh->nlmsg_type (2) == SOCK_DIAG_BY_FAMILY (20) # # 1: Test terminated by assertion # # FAIL diag_uid.uid.1 # not ok 1 diag_uid.uid.1 Let's add all AF_UNIX Kconfig to the config file under af_unix dir so that NIPA consumes it. Fixes: ac011361 ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.") Link: https://netdev-3.bots.linux.dev/vmksft-net/results/644841/104-diag-uid/stdout [0] Link: https://netdev-3.bots.linux.dev/vmksft-net/results/644841/config [1] Reported-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Shannon Nelson authored
Our corporate overlords have been changing the domains around again and this mailing list has gone away. Signed-off-by:
Shannon Nelson <shannon.nelson@amd.com> Reviewed-by:
Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by:
-
Eric Dumazet authored
syzbot reported a lockdep violation involving bridge driver [1] Make sure netdev_rename_lock is softirq safe to fix this issue. [1] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected 6.10.0-rc2-syzkaller-00249-gbe27b896 #0 Not tainted ----------------------------------------------------- syz-executor.2/9449 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire: ffffffff8f5de668 (netdev_rename_lock.seqcount){+.+.}-{0:0}, at: rtnl_fill_ifinfo+0x38e/0x2270 net/core/rtnetlink.c:1839 and this task is already holding: ffff888060c64cb8 (&br->lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] ffff888060c64cb8 (&br->lock){+.-.}-{2:2}, at: br_port_slave_changelink+0x3d/0x150 net/bridge/br_netlink.c:1212 which would create a new lock dependency: (&br->lock){+.-.}-{2:2} -> (netdev_rename_lock.seqcount){+.+.}-{0:0} but this new dependency connects a SOFTIRQ-irq-safe lock: (&br->lock){+.-.}-{2:2} ... which became SOFTIRQ-irq-safe at: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] br_forward_delay_timer_expired+0x50/0x440 net/bridge/br_stp_timer.c:86 call_timer_fn+0x18e/0x650 kernel/time/timer.c:1792 expire_timers kernel/time/timer.c:1843 [inline] __run_timers kernel/time/timer.c:2417 [inline] __run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2428 run_timer_base kernel/time/timer.c:2437 [inline] run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2447 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 lock_acquire+0x264/0x550 kernel/locking/lockdep.c:5758 fs_reclaim_acquire+0xaf/0x140 mm/page_alloc.c:3800 might_alloc include/linux/sched/mm.h:334 [inline] slab_pre_alloc_hook mm/slub.c:3890 [inline] slab_alloc_node mm/slub.c:3980 [inline] kmalloc_trace_noprof+0x3d/0x2c0 mm/slub.c:4147 kmalloc_noprof include/linux/slab.h:660 [inline] kzalloc_noprof include/linux/slab.h:778 [inline] class_dir_create_and_add drivers/base/core.c:3255 [inline] get_device_parent+0x2a7/0x410 drivers/base/core.c:3315 device_add+0x325/0xbf0 drivers/base/core.c:3645 netdev_register_kobject+0x17e/0x320 net/core/net-sysfs.c:2136 register_netdevice+0x11d5/0x19e0 net/core/dev.c:10375 nsim_init_netdevsim drivers/net/netdevsim/netdev.c:690 [inline] nsim_create+0x647/0x890 drivers/net/netdevsim/netdev.c:750 __nsim_dev_port_add+0x6c0/0xae0 drivers/net/netdevsim/dev.c:1390 nsim_dev_port_add_all drivers/net/netdevsim/dev.c:1446 [inline] nsim_dev_reload_create drivers/net/netdevsim/dev.c:1498 [inline] nsim_dev_reload_up+0x69b/0x8e0 drivers/net/netdevsim/dev.c:985 devlink_reload+0x478/0x870 net/devlink/dev.c:474 devlink_nl_reload_doit+0xbd6/0xe50 net/devlink/dev.c:586 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2585 ___sys_sendmsg net/socket.c:2639 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2668 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f to a SOFTIRQ-irq-unsafe lock: (netdev_rename_lock.seqcount){+.+.}-{0:0} ... which became SOFTIRQ-irq-unsafe at: ... lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 do_write_seqcount_begin_nested include/linux/seqlock.h:469 [inline] do_write_seqcount_begin include/linux/seqlock.h:495 [inline] write_seqlock include/linux/seqlock.h:823 [inline] dev_change_name+0x184/0x920 net/core/dev.c:1229 do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2880 __rtnl_newlink net/core/rtnetlink.c:3696 [inline] rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743 rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 __sys_sendto+0x3a4/0x4f0 net/socket.c:2192 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2200 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(netdev_rename_lock.seqcount); local_irq_disable(); lock(&br->lock); lock(netdev_rename_lock.seqcount); <Interrupt> lock(&br->lock); *** DEADLOCK *** 3 locks held by syz-executor.2/9449: #0: ffffffff8f5e7448 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock net/core/rtnetlink.c:79 [inline] #0: ffffffff8f5e7448 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x842/0x1180 net/core/rtnetlink.c:6632 #1: ffff888060c64cb8 (&br->lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] #1: ffff888060c64cb8 (&br->lock){+.-.}-{2:2}, at: br_port_slave_changelink+0x3d/0x150 net/bridge/br_netlink.c:1212 #2: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline] #2: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:781 [inline] #2: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: team_change_rx_flags+0x29/0x330 drivers/net/team/team_core.c:1767 the dependencies between SOFTIRQ-irq-safe lock and the holding lock: -> (&br->lock){+.-.}-{2:2} { HARDIRQ-ON-W at: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] br_add_if+0xb34/0xef0 net/bridge/br_if.c:682 do_set_master net/core/rtnetlink.c:2701 [inline] do_setlink+0xe70/0x41f0 net/core/rtnetlink.c:2907 __rtnl_newlink net/core/rtnetlink.c:3696 [inline] rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743 rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 __sys_sendto+0x3a4/0x4f0 net/socket.c:2192 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2200 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f IN-SOFTIRQ-W at: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] br_forward_delay_timer_expired+0x50/0x440 net/bridge/br_stp_timer.c:86 call_timer_fn+0x18e/0x650 kernel/time/timer.c:1792 expire_timers kernel/time/timer.c:1843 [inline] __run_timers kernel/time/timer.c:2417 [inline] __run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2428 run_timer_base kernel/time/timer.c:2437 [inline] run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2447 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 lock_acquire+0x264/0x550 kernel/locking/lockdep.c:5758 fs_reclaim_acquire+0xaf/0x140 mm/page_alloc.c:3800 might_alloc include/linux/sched/mm.h:334 [inline] slab_pre_alloc_hook mm/slub.c:3890 [inline] slab_alloc_node mm/slub.c:3980 [inline] kmalloc_trace_noprof+0x3d/0x2c0 mm/slub.c:4147 kmalloc_noprof include/linux/slab.h:660 [inline] kzalloc_noprof include/linux/slab.h:778 [inline] class_dir_create_and_add drivers/base/core.c:3255 [inline] get_device_parent+0x2a7/0x410 drivers/base/core.c:3315 device_add+0x325/0xbf0 drivers/base/core.c:3645 netdev_register_kobject+0x17e/0x320 net/core/net-sysfs.c:2136 register_netdevice+0x11d5/0x19e0 net/core/dev.c:10375 nsim_init_netdevsim drivers/net/netdevsim/netdev.c:690 [inline] nsim_create+0x647/0x890 drivers/net/netdevsim/netdev.c:750 __nsim_dev_port_add+0x6c0/0xae0 drivers/net/netdevsim/dev.c:1390 nsim_dev_port_add_all drivers/net/netdevsim/dev.c:1446 [inline] nsim_dev_reload_create drivers/net/netdevsim/dev.c:1498 [inline] nsim_dev_reload_up+0x69b/0x8e0 drivers/net/netdevsim/dev.c:985 devlink_reload+0x478/0x870 net/devlink/dev.c:474 devlink_nl_reload_doit+0xbd6/0xe50 net/devlink/dev.c:586 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2585 ___sys_sendmsg net/socket.c:2639 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2668 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f INITIAL USE at: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] br_add_if+0xb34/0xef0 net/bridge/br_if.c:682 do_set_master net/core/rtnetlink.c:2701 [inline] do_setlink+0xe70/0x41f0 net/core/rtnetlink.c:2907 __rtnl_newlink net/core/rtnetlink.c:3696 [inline] rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743 rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 __sys_sendto+0x3a4/0x4f0 net/socket.c:2192 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2200 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f } ... key at: [<ffffffff94b9a1a0>] br_dev_setup.__key+0x0/0x20 the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: -> (netdev_rename_lock.seqcount){+.+.}-{0:0} { HARDIRQ-ON-W at: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 do_write_seqcount_begin_nested include/linux/seqlock.h:469 [inline] do_write_seqcount_begin include/linux/seqlock.h:495 [inline] write_seqlock include/linux/seqlock.h:823 [inline] dev_change_name+0x184/0x920 net/core/dev.c:1229 do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2880 __rtnl_newlink net/core/rtnetlink.c:3696 [inline] rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743 rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 __sys_sendto+0x3a4/0x4f0 net/socket.c:2192 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2200 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f SOFTIRQ-ON-W at: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 do_write_seqcount_begin_nested include/linux/seqlock.h:469 [inline] do_write_seqcount_begin include/linux/seqlock.h:495 [inline] write_seqlock include/linux/seqlock.h:823 [inline] dev_change_name+0x184/0x920 net/core/dev.c:1229 do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2880 __rtnl_newlink net/core/rtnetlink.c:3696 [inline] rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743 rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 __sys_sendto+0x3a4/0x4f0 net/socket.c:2192 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2200 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f INITIAL USE at: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 do_write_seqcount_begin_nested include/linux/seqlock.h:469 [inline] do_write_seqcount_begin include/linux/seqlock.h:495 [inline] write_seqlock include/linux/seqlock.h:823 [inline] dev_change_name+0x184/0x920 net/core/dev.c:1229 do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2880 __rtnl_newlink net/core/rtnetlink.c:3696 [inline] rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3743 rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 __sys_sendto+0x3a4/0x4f0 net/socket.c:2192 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2200 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f INITIAL READ USE at: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 seqcount_lockdep_reader_access include/linux/seqlock.h:72 [inline] read_seqbegin include/linux/seqlock.h:772 [inline] netdev_copy_name+0x168/0x2c0 net/core/dev.c:949 rtnl_fill_ifinfo+0x38e/0x2270 net/core/rtnetlink.c:1839 rtmsg_ifinfo_build_skb+0x18a/0x260 net/core/rtnetlink.c:4073 rtmsg_ifinfo_event net/core/rtnetlink.c:4107 [inline] rtmsg_ifinfo+0x91/0x1b0 net/core/rtnetlink.c:4116 register_netdevice+0x1665/0x19e0 net/core/dev.c:10422 register_netdev+0x3b/0x50 net/core/dev.c:10512 loopback_net_init+0x73/0x150 drivers/net/loopback.c:217 ops_init+0x359/0x610 net/core/net_namespace.c:139 __register_pernet_operations net/core/net_namespace.c:1247 [inline] register_pernet_operations+0x2cb/0x660 net/core/net_namespace.c:1320 register_pernet_device+0x33/0x80 net/core/net_namespace.c:1407 net_dev_init+0xfcd/0x10d0 net/core/dev.c:11956 do_one_initcall+0x248/0x880 init/main.c:1267 do_initcall_level+0x157/0x210 init/main.c:1329 do_initcalls+0x3f/0x80 init/main.c:1345 kernel_init_freeable+0x435/0x5d0 init/main.c:1578 kernel_init+0x1d/0x2b0 init/main.c:1467 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 } ... key at: [<ffffffff8f5de668>] netdev_rename_lock+0x8/0xa0 ... acquired at: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 seqcount_lockdep_reader_access include/linux/seqlock.h:72 [inline] read_seqbegin include/linux/seqlock.h:772 [inline] netdev_copy_name+0x168/0x2c0 net/core/dev.c:949 rtnl_fill_ifinfo+0x38e/0x2270 net/core/rtnetlink.c:1839 rtmsg_ifinfo_build_skb+0x18a/0x260 net/core/rtnetlink.c:4073 rtmsg_ifinfo_event net/core/rtnetlink.c:4107 [inline] rtmsg_ifinfo+0x91/0x1b0 net/core/rtnetlink.c:4116 __dev_notify_flags+0xf7/0x400 net/core/dev.c:8816 __dev_set_promiscuity+0x152/0x5a0 net/core/dev.c:8588 dev_set_promiscuity+0x51/0xe0 net/core/dev.c:8608 team_change_rx_flags+0x203/0x330 drivers/net/team/team_core.c:1771 dev_change_rx_flags net/core/dev.c:8541 [inline] __dev_set_promiscuity+0x406/0x5a0 net/core/dev.c:8585 dev_set_promiscuity+0x51/0xe0 net/core/dev.c:8608 br_port_clear_promisc net/bridge/br_if.c:135 [inline] br_manage_promisc+0x505/0x590 net/bridge/br_if.c:172 nbp_update_port_count net/bridge/br_if.c:242 [inline] br_port_flags_change+0x161/0x1f0 net/bridge/br_if.c:761 br_setport+0xcb5/0x16d0 net/bridge/br_netlink.c:1000 br_port_slave_changelink+0x135/0x150 net/bridge/br_netlink.c:1213 __rtnl_newlink net/core/rtnetlink.c:3689 [inline] rtnl_newlink+0x169f/0x20a0 net/core/rtnetlink.c:3743 rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2585 ___sys_sendmsg net/socket.c:2639 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2668 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f stack backtrace: CPU: 0 PID: 9449 Comm: syz-executor.2 Not tainted 6.10.0-rc2-syzkaller-00249-gbe27b896 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_bad_irq_dependency kernel/locking/lockdep.c:2626 [inline] check_irq_usage kernel/locking/lockdep.c:2865 [inline] check_prev_add kernel/locking/lockdep.c:3138 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x4de0/0x5900 kernel/locking/lockdep.c:3869 __lock_acquire+0x1346/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5754 seqcount_lockdep_reader_access include/linux/seqlock.h:72 [inline] read_seqbegin include/linux/seqlock.h:772 [inline] netdev_copy_name+0x168/0x2c0 net/core/dev.c:949 rtnl_fill_ifinfo+0x38e/0x2270 net/core/rtnetlink.c:1839 rtmsg_ifinfo_build_skb+0x18a/0x260 net/core/rtnetlink.c:4073 rtmsg_ifinfo_event net/core/rtnetlink.c:4107 [inline] rtmsg_ifinfo+0x91/0x1b0 net/core/rtnetlink.c:4116 __dev_notify_flags+0xf7/0x400 net/core/dev.c:8816 __dev_set_promiscuity+0x152/0x5a0 net/core/dev.c:8588 dev_set_promiscuity+0x51/0xe0 net/core/dev.c:8608 team_change_rx_flags+0x203/0x330 drivers/net/team/team_core.c:1771 dev_change_rx_flags net/core/dev.c:8541 [inline] __dev_set_promiscuity+0x406/0x5a0 net/core/dev.c:8585 dev_set_promiscuity+0x51/0xe0 net/core/dev.c:8608 br_port_clear_promisc net/bridge/br_if.c:135 [inline] br_manage_promisc+0x505/0x590 net/bridge/br_if.c:172 nbp_update_port_count net/bridge/br_if.c:242 [inline] br_port_flags_change+0x161/0x1f0 net/bridge/br_if.c:761 br_setport+0xcb5/0x16d0 net/bridge/br_netlink.c:1000 br_port_slave_changelink+0x135/0x150 net/bridge/br_netlink.c:1213 __rtnl_newlink net/core/rtnetlink.c:3689 [inline] rtnl_newlink+0x169f/0x20a0 net/core/rtnetlink.c:3743 rtnetlink_rcv_msg+0x89b/0x1180 net/core/rtnetlink.c:6635 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2564 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x8db/0xcb0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2585 ___sys_sendmsg net/socket.c:2639 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2668 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f3b3047cf29 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3b311740c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f3b305b4050 RCX: 00007f3b3047cf29 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000008 RBP: 00007f3b304ec074 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f3b305b4050 R15: 00007ffca2f3dc68 </TASK> Fixes: 0840556e ("net: Protect dev->name by seqlock.") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
-
Taehee Yoo authored
Currently, the ionic_run_xdp() doesn't handle multi-buffer packets properly for XDP_TX and XDP_REDIRECT. When a jumbo frame is received, the ionic_run_xdp() first makes xdp frame with all necessary pages in the rx descriptor. And if the action is either XDP_TX or XDP_REDIRECT, it should unmap dma-mapping and reset page pointer to NULL for all pages, not only the first page. But it doesn't for SG pages. So, SG pages unexpectedly will be reused. It eventually causes kernel panic. Oops: general protection fault, probably for non-canonical address 0x504f4e4dbebc64ff: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.10.0-rc3+ #25 RIP: 0010:xdp_return_frame+0x42/0x90 Code: 01 75 12 5b 4c 89 e6 5d 31 c9 41 5c 31 d2 41 5d e9 73 fd ff ff 44 8b 6b 20 0f b7 43 0a 49 81 ed 68 01 00 00 49 29 c5 49 01 fd <41> 80 7d0 RSP: 0018:ffff99d00122ce08 EFLAGS: 00010202 RAX: 0000000000005453 RBX: ffff8d325f904000 RCX: 0000000000000001 RDX: 00000000670e1000 RSI: 000000011f90d000 RDI: 504f4e4d4c4b4a49 RBP: ffff99d003907740 R08: 0000000000000000 R09: 0000000000000000 R10: 000000011f90d000 R11: 0000000000000000 R12: ffff8d325f904010 R13: 504f4e4dbebc64fd R14: ffff8d3242b070c8 R15: ffff99d0039077c0 FS: 0000000000000000(0000) GS:ffff8d399f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f41f6c85e38 CR3: 000000037ac30000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? die_addr+0x33/0x90 ? exc_general_protection+0x251/0x2f0 ? asm_exc_general_protection+0x22/0x30 ? xdp_return_frame+0x42/0x90 ionic_tx_clean+0x211/0x280 [ionic 15881354510e6a9c655c59c54812b319ed2cd015] ionic_tx_cq_service+0xd3/0x210 [ionic 15881354510e6a9c655c59c54812b319ed2cd015] ionic_txrx_napi+0x41/0x1b0 [ionic 15881354510e6a9c655c59c54812b319ed2cd015] __napi_poll.constprop.0+0x29/0x1b0 net_rx_action+0x2c4/0x350 handle_softirqs+0xf4/0x320 irq_exit_rcu+0x78/0xa0 common_interrupt+0x77/0x90 Fixes: 5377805d ("ionic: implement xdp frags support") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Reviewed-by:
-
Kory Maincent authored
Selecting FW_UPLOAD is not sufficient as it allows the firmware loader API to be built as a module alongside the pd692x0 driver built as builtin. Add select FW_LOADER to fix this issue. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202406200632.hSChnX0g-lkp@intel.com/ Fixes: 9a993845 ("net: pse-pd: Add PD692x0 PSE controller driver") Signed-off-by:
-
Hangbin Liu authored
The __ethtool_get_ts_info function returns directly if the device has a get_ts_info() method. For bonding with an active slave, this works correctly as we simply return the real device's timestamping information. However, when there is no active slave, we only check the slave's TX software timestamp information. We still need to set the phc index and RX timestamp information manually. Otherwise, the result will be look like: Time stamping parameters for bond0: Capabilities: software-transmit PTP Hardware Clock: 0 Hardware Transmit Timestamp Modes: none Hardware Receive Filter Modes: none This issue does not affect VLAN or MACVLAN devices, as they only have one downlink and can directly use the downlink's timestamping information. Fixes: b8768dc4 ("net: ethtool: Refactor identical get_ts_info implementations.") Reported-by:Liang Li <liali@redhat.com> Closes: https://issues.redhat.com/browse/RHEL-42409Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
-
Aryan Srivastava authored
Fill this in so user-space can identify multiple ports on the same CP unit. Signed-off-by:
Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz> Signed-off-by:
-
Xin Long authored
Ilya found a failure in running check-kernel tests with at_groups=144 (144: conntrack - FTP SNAT orig tuple) in OVS repo. After his further investigation, the root cause is that the labels sent to userspace for related ct are incorrect. The labels for unconfirmed related ct should use its master's labels. However, the changes made in commit 8c8b7332 ("openvswitch: set IPS_CONFIRMED in tmpl status only when commit is set in conntrack") led to getting labels from this related ct. So fix it in ovs_ct_get_labels() by changing to copy labels from its master ct if it is a unconfirmed related ct. Note that there is no fix needed for ct->mark, as it was already copied from its master ct for related ct in init_conntrack(). Fixes: 8c8b7332 ("openvswitch: set IPS_CONFIRMED in tmpl status only when commit is set in conntrack") Reported-by:
Ilya Maximets <i.maximets@ovn.org> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Aaron Conole <aconole@redhat.com> Signed-off-by:
-
Vitor Soares authored
When the mcp251xfd_start_xmit() function fails, the driver stops processing messages, and the interrupt routine does not return, running indefinitely even after killing the running application. Error messages: [ 441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit: -16 [ 441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not empty. (seq=0x000017c7, tef_tail=0x000017cf, tef_head=0x000017d0, tx_head=0x000017d3). ... and repeat forever. The issue can be triggered when multiple devices share the same SPI interface. And there is concurrent access to the bus. The problem occurs because tx_ring->head increments even if mcp251xfd_start_xmit() fails. Consequently, the driver skips one TX package while still expecting a response in mcp251xfd_handle_tefif_one(). Resolve the issue by starting a workqueue to write the tx obj synchronously if err = -EBUSY. In case of another error, decrement tx_ring->head, remove skb from the echo stack, and drop the message. Fixes: 55e5b97f ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Cc: stable@vger.kernel.org Signed-off-by:
Vitor Soares <vitor.soares@toradex.com> Link: https://lore.kernel.org/all/20240517134355.770777-1-ivitro@gmail.com [mkl: use more imperative wording in patch description] Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Chen Ni authored
As the potential failure of usb_submit_urb(), it should be better to return the err variable to catch the error. Signed-off-by:
Chen Ni <nichen@iscas.ac.cn> Link: https://lore.kernel.org/all/20240521041020.1519416-1-nichen@iscas.ac.cnSigned-off-by:
-
Oleksij Rempel authored
Addresses an issue where a CAN bus error during a BAM transmission could stall the socket queue, preventing further transmissions even after the bus error is resolved. The fix activates the next queued session after the error recovery, allowing communication to continue. Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Cc: stable@vger.kernel.org Reported-by:
Alexander Hölzl <alexander.hoelzl@gmx.net> Tested-by:
Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20240528070648.1947203-1-o.rempel@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by:
-
Shigeru Yoshida authored
syzbot reported kernel-infoleak in raw_recvmsg() [1]. j1939_send_one() creates full frame including unused data, but it doesn't initialize it. This causes the kernel-infoleak issue. Fix this by initializing unused data. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 copy_to_iter include/linux/uio.h:196 [inline] memcpy_to_msg include/linux/skbuff.h:4113 [inline] raw_recvmsg+0x2b8/0x9e0 net/can/raw.c:1008 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x2c4/0x340 net/socket.c:1068 ____sys_recvmsg+0x18a/0x620 net/socket.c:2803 ___sys_recvmsg+0x223/0x840 net/socket.c:2845 do_recvmmsg+0x4fc/0xfd0 net/socket.c:2939 __sys_recvmmsg net/socket.c:3018 [inline] __do_sys_recvmmsg net/socket.c:3041 [inline] __se_sys_recvmmsg net/socket.c:3034 [inline] __x64_sys_recvmmsg+0x397/0x490 net/socket.c:3034 x64_sys_call+0xf6c/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:300 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1313 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 sock_alloc_send_skb include/net/sock.h:1842 [inline] j1939_sk_alloc_skb net/can/j1939/socket.c:878 [inline] j1939_sk_send_loop net/can/j1939/socket.c:1142 [inline] j1939_sk_sendmsg+0xc0a/0x2730 net/can/j1939/socket.c:1277 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674 x64_sys_call+0xc4b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Bytes 12-15 of 16 are uninitialized Memory access of size 16 starts at ffff888120969690 Data copied to user address 00000000200017c0 CPU: 1 PID: 5050 Comm: syz-executor198 Not tainted 6.9.0-rc5-syzkaller-00031-g71b1543c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Reported-and-tested-by: syzbot+5681e40d297b30f5b513@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=5681e40d297b30f5b513Acked-by:
Shigeru Yoshida <syoshida@redhat.com> Link: https://lore.kernel.org/all/20240517035953.2617090-1-syoshida@redhat.com Cc: stable@vger.kernel.org Signed-off-by:
-
Oleksij Rempel authored
net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new This patch enhances error handling in scenarios with RTS (Request to Send) messages arriving closely. It replaces the less informative WARN_ON_ONCE backtraces with a new error handling method. This provides clearer error messages and allows for the early termination of problematic sessions. Previously, sessions were only released at the end of j1939_xtp_rx_rts(). Potentially this could be reproduced with something like: testj1939 -r vcan0:0x80 & while true; do # send first RTS cansend vcan0 18EC8090#1014000303002301; # send second RTS cansend vcan0 18EC8090#1014000303002301; # send abort cansend vcan0 18EC8090#ff00000000002301; done Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Reported-by: syzbot+daa36413a5cedf799ae4@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by:
-
Tristram Ha authored
The very first flush in any port will flush all learned addresses in all ports. This can be observed by unplugging the cable from one port while additional ports are connected and dumping the fdb entries. This problem is caused by the initially wrong value programmed to the REG_SW_LUE_CTRL_1 register. Setting SW_FLUSH_STP_TABLE and SW_FLUSH_MSTP_TABLE bits does not have an immediate effect. It is when ksz9477_flush_dyn_mac_table() is called then the SW_FLUSH_STP_TABLE bit takes effect and flushes all learned entries. After that call both bits are reset and so the next port flush will not cause such problem again. Fixes: b987e98e ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by:
Tristram Ha <tristram.ha@microchip.com> Link: https://patch.msgid.link/1718756202-2731-1-git-send-email-Tristram.Ha@microchip.comSigned-off-by:
-
- 20 Jun, 2024 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, bpf and netfilter. Happy summer solstice! The line count is a bit inflated by a selftest and update to a driver's FW interface header, in reality this is slightly below average for us. We are expecting one driver fix from Intel, but there are no big known issues. Current release - regressions: - ipv6: bring NLM_DONE out to a separate recv() again Current release - new code bugs: - wifi: cfg80211: wext: set ssids=NULL for passive scans via old wext API Previous releases - regressions: - wifi: mac80211: fix monitor channel setting with chanctx emulation (probably most awaited of the fixes in this PR, tracked by Thorsten) - usb: ax88179_178a: bring back reset on init, if PHY is disconnected - bpf: fix UML x86_64 compile failure with BPF - bpf: avoid splat in pskb_pull_reason(), sanity check added can be hit with malicious BPF - eth: mvpp2: use slab_build_skb() for packets in slab, driver was missed during API refactoring - wifi: iwlwifi: add missing unlock of mvm mutex Previous releases - always broken: - ipv6: add a number of missing null-checks for in6_dev_get(), in case IPv6 disabling races with the datapath - bpf: fix reg_set_min_max corruption of fake_reg - sched: act_ct: add netns as part of the key of tcf_ct_flow_table" * tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits) net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettings selftests: virtio_net: add forgotten config options bnxt_en: Restore PTP tx_avail count in case of skb_pad() error bnxt_en: Set TSO max segs on devices with limits bnxt_en: Update firmware interface to 1.10.3.44 net: stmmac: Assign configured channel value to EXTTS event net: do not leave a dangling sk pointer, when socket creation fails net/tcp_ao: Don't leak ao_info on error-path ice: Fix VSI list rule with ICE_SW_LKUP_LAST type ipv6: bring NLM_DONE out to a separate recv() again selftests: add selftest for the SRv6 End.DX6 behavior with netfilter selftests: add selftest for the SRv6 End.DX4 behavior with netfilter netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors netfilter: ipset: Fix suspicious rcu_dereference_protected() selftests: openvswitch: Set value to nla flags. octeontx2-pf: Fix linking objects into multiple modules octeontx2-pf: Add error handling to VLAN unoffload handling virtio_net: fixing XDP for fully checksummed packets handling virtio_net: checksum offloading handling fix ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Lots of small HD-audio quirks and fixes (mostly Realtek codec and Cirrus stuff). Also a small MIDI 2.0 fix and a fix for missing module description are included" * tag 'sound-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda: cs35l56: Select SERIAL_MULTI_INSTANTIATE ALSA: hda/realtek: Add more codec ID to no shutup pins list sound/oss/dmasound: add missing MODULE_DESCRIPTION() macro ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14ARP8 ALSA: hda/realtek: Enable headset mic on IdeaPad 330-17IKB 81DM ALSA: hda: tas2781: Component should be unbound before deconstruction ALSA: hda: cs35l41: Component should be unbound before deconstruction ALSA: hda: cs35l56: Component should be unbound before deconstruction ALSA/hda: intel-dsp-config: Document AVS as dsp_driver option ALSA: hda/realtek: Support Lenovo Thinkbook 13x Gen 4 ALSA: hda/realtek: Support Lenovo Thinkbook 16P Gen 5 ALSA: hda: cs35l41: Support Lenovo Thinkbook 13x Gen 4 ALSA: hda: cs35l41: Support Lenovo Thinkbook 16P Gen 5 ALSA: hda/realtek: Remove Framework Laptop 16 from quirks ALSA: hda/realtek: Limit mic boost on N14AP7 ALSA: hda/realtek: fix mute/micmute LEDs don't work for ProBook 445/465 G11. ALSA: seq: ump: Fix missing System Reset message handling ALSA: hda: cs35l41: Possible null pointer dereference in cs35l41_hda_unbind() ALSA: hda: cs35l56: Fix lifecycle of codec pointer
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull mfd fix from Lee Jones: - Fix AXP717 PMIC probe and by extension its consumers * tag 'mfd-fixes-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: axp20x: AXP717: Fix missing IRQ status registers range
-
Oliver Neukum authored
This functions retrieves values by passing a pointer. As the function that retrieves them can fail before touching the pointers, the variables must be initialized. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+5186630949e3c55f0799@syzkaller.appspotmail.com Signed-off-by:
Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20240619132816.11526-1-oneukum@suse.comSigned-off-by:
-
Jiri Pirko authored
One may use tools/testing/selftests/drivers/net/virtio_net/config for example for vng build command like this one: $ vng -v -b -f tools/testing/selftests/drivers/net/virtio_net/config In that case, the needed kernel config options are not turned on. Add the missed kernel config options. Reported-by:
Matthieu Baerts <matttbe@kernel.org> Closes: https://lore.kernel.org/netdev/1a63f209-b1d4-4809-bc30-295a5cafa296@kernel.org/ Fixes: ccfaed04 ("selftests: virtio_net: add initial tests") Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240619061748.1869404-1-jiri@resnulli.usSigned-off-by:
-
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Bug fixes for net The first firmware interface update is needed by the second patch to limit the number of TSO segments on the 5760X chips. The third patch fixes the TX error path for PTP packets. ==================== Link: https://lore.kernel.org/r/20240618215313.29631-1-michael.chan@broadcom.comSigned-off-by:
-
Pavan Chebbi authored
The current code only restores PTP tx_avail count when we get DMA mapping errors. Fix it so that the PTP tx_avail count will be restored for both DMA mapping errors and skb_pad() errors. Otherwise PTP TX timestamp will not be available after a PTP packet hits the skb_pad() error. Fixes: 83bb623c ("bnxt_en: Transmit and retrieve packet timestamps") Reviewed-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Reviewed-by:
-
Michael Chan authored
Firmware will now advertise a non-zero TSO max segments if the device has a limit. 0 means no limit. The latest 5760X chip (early revs) has a limit of 2047 that cannot be exceeded. If exceeded, the chip will send out just a small number of segments. Call netif_set_tso_max_segs() if the device has a limit. Fixes: 2012a6ab ("bnxt_en: Add 5760X (P7) PCI IDs") Reviewed-by:
Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
-
Michael Chan authored
The relevant change is the max_tso_segs value returned by firmware in the HWRM_FUNC_QCAPS response. This value will be used in the next patch to cap the TSO segments. Signed-off-by:
-
Oleksij Rempel authored
Assign the configured channel value to the EXTTS event in the timestamp interrupt handler. Without assigning the correct channel, applications like ts2phc will refuse to accept the event, resulting in errors such as: ... ts2phc[656.834]: config item end1.ts2phc.pin_index is 0 ts2phc[656.834]: config item end1.ts2phc.channel is 3 ts2phc[656.834]: config item end1.ts2phc.extts_polarity is 2 ts2phc[656.834]: config item end1.ts2phc.extts_correction is 0 ... ts2phc[656.862]: extts on unexpected channel ts2phc[658.141]: extts on unexpected channel ts2phc[659.140]: extts on unexpected channel Fixes: f4da5652 ("net: stmmac: Add support for external trigger timestamping") Cc: stable@vger.kernel.org Signed-off-by:
Wojciech Drewek <wojciech.drewek@intel.com> Link: https://lore.kernel.org/r/20240618073821.619751-1-o.rempel@pengutronix.deSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 fixes the suspicious RCU usage warning that resulted from the recent fix for the race between namespace cleanup and gc in ipset left out checking the pernet exit phase when calling rcu_dereference_protected(), from Jozsef Kadlecsik. Patch #2 fixes incorrect input and output netdevice in SRv6 prerouting hooks, from Jianguo Wu. Patch #3 moves nf_hooks_lwtunnel sysctl toggle to the netfilter core. The connection tracking system is loaded on-demand, this ensures availability of this knob regardless. Patch #4-#5 adds selftests for SRv6 netfilter hooks also from Jianguo Wu. netfilter pull request 24-06-19 * tag 'nf-24-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: add selftest for the SRv6 End.DX6 behavior with netfilter selftests: add selftest for the SRv6 End.DX4 behavior with netfilter netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors netfilter: ipset: Fix suspicious rcu_dereference_protected() ==================== Link: https://lore.kernel.org/r/20240619170537.2846-1-pablo@netfilter.orgSigned-off-by:
-
Ignat Korchagin authored
It is possible to trigger a use-after-free by: * attaching an fentry probe to __sock_release() and the probe calling the bpf_get_socket_cookie() helper * running traceroute -I 1.1.1.1 on a freshly booted VM A KASAN enabled kernel will log something like below (decoded and stripped): ================================================================== BUG: KASAN: slab-use-after-free in __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) Read of size 8 at addr ffff888007110dd8 by task traceroute/299 CPU: 2 PID: 299 Comm: traceroute Tainted: G E 6.10.0-rc2+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117 (discriminator 1)) print_report (mm/kasan/report.c:378 mm/kasan/report.c:488) ? __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) kasan_report (mm/kasan/report.c:603) ? __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) kasan_check_range (mm/kasan/generic.c:183 mm/kasan/generic.c:189) __sock_gen_cookie (./arch/x86/include/asm/atomic64_64.h:15 ./include/linux/atomic/atomic-arch-fallback.h:2583 ./include/linux/atomic/atomic-instrumented.h:1611 net/core/sock_diag.c:29) bpf_get_socket_ptr_cookie (./arch/x86/include/asm/preempt.h:94 ./include/linux/sock_diag.h:42 net/core/filter.c:5094 net/core/filter.c:5092) bpf_prog_875642cf11f1d139___sock_release+0x6e/0x8e bpf_trampoline_6442506592+0x47/0xaf __sock_release (net/socket.c:652) __sock_create (net/socket.c:1601) ... Allocated by task 299 on cpu 2 at 78.328492s: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:68) __kasan_slab_alloc (mm/kasan/common.c:312 mm/kasan/common.c:338) kmem_cache_alloc_noprof (mm/slub.c:3941 mm/slub.c:4000 mm/slub.c:4007) sk_prot_alloc (net/core/sock.c:2075) sk_alloc (net/core/sock.c:2134) inet_create (net/ipv4/af_inet.c:327 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1572) __sys_socket (net/socket.c:1660 net/socket.c:1644 net/socket.c:1706) __x64_sys_socket (net/socket.c:1718) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Freed by task 299 on cpu 2 at 78.328502s: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:68) kasan_save_free_info (mm/kasan/generic.c:582) poison_slab_object (mm/kasan/common.c:242) __kasan_slab_free (mm/kasan/common.c:256) kmem_cache_free (mm/slub.c:4437 mm/slub.c:4511) __sk_destruct (net/core/sock.c:2117 net/core/sock.c:2208) inet_create (net/ipv4/af_inet.c:397 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1572) __sys_socket (net/socket.c:1660 net/socket.c:1644 net/socket.c:1706) __x64_sys_socket (net/socket.c:1718) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Fix this by clearing the struct socket reference in sk_common_release() to cover all protocol families create functions, which may already attached the reference to the sk object with sock_init_data(). Fixes: c5dbb89f ("bpf: Expose bpf_get_socket_cookie to tracing programs") Suggested-by:Ignat Korchagin <ignat@cloudflare.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/netdev/20240613194047.36478-1-kuniyu@amazon.com/T/Reviewed-by:
D. Wythe <alibuda@linux.alibaba.com> Link: https://lore.kernel.org/r/20240617210205.67311-1-ignat@cloudflare.comSigned-off-by:
-
Simon Trimmer authored
The ACPI IDs used in the CS35L56 HDA drivers are all handled by the serial multi-instantiate driver which starts multiple Linux device instances from a single ACPI Device() node. As serial multi-instantiate is not an optional part of the system add it as a dependency in Kconfig so that it is not overlooked. Signed-off-by:
Simon Trimmer <simont@opensource.cirrus.com> Link: https://lore.kernel.org/20240619161602.117452-1-simont@opensource.cirrus.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Dmitry Safonov authored
It seems I introduced it together with TCP_AO_CMDF_AO_REQUIRED, on version 5 [1] of TCP-AO patches. Quite frustrative that having all these selftests that I've written, running kmemtest & kcov was always in todo. [1]: https://lore.kernel.org/netdev/20230215183335.800122-5-dima@arista.com/Reported-by:
Dmitry Safonov <0x7f454c46@gmail.com> Reviewed-by:
-
Marcin Szycik authored
Adding/updating VSI list rule, as well as allocating/freeing VSI list resource are called several times with type ICE_SW_LKUP_LAST, which fails because ice_update_vsi_list_rule() and ice_aq_alloc_free_vsi_list() consider it invalid. Allow calling these functions with ICE_SW_LKUP_LAST. This fixes at least one issue in switchdev mode, where the same rule with different action cannot be added, e.g.: tc filter add dev $PF1 ingress protocol arp prio 0 flower skip_sw \ dst_mac ff:ff:ff:ff:ff:ff action mirred egress redirect dev $VF1_PR tc filter add dev $PF1 ingress protocol arp prio 0 flower skip_sw \ dst_mac ff:ff:ff:ff:ff:ff action mirred egress redirect dev $VF2_PR Fixes: 0f94570d ("ice: allow adding advanced rules") Suggested-by:Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by:
Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240618210206.981885-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Commit under Fixes optimized the number of recv() calls needed during RTM_GETROUTE dumps, but we got multiple reports of applications hanging on recv() calls. Applications expect that a route dump will be terminated with a recv() reading an individual NLM_DONE message. Coalescing NLM_DONE is perfectly legal in netlink, but even tho reporters fixed the code in respective projects, chances are it will take time for those applications to get updated. So revert to old behavior (for now)? This is an IPv6 version of commit 460b0d33 ("inet: bring NLM_DONE out to a separate recv() again"). Reported-by:
Maciej Żenczykowski <zenczykowski@gmail.com> Link: https://lore.kernel.org/all/CANP3RGc1RG71oPEBXNx_WZFP9AyphJefdO4paczN92n__ds4ow@mail.gmail.comReported-by:
Stefano Brivio <sbrivio@redhat.com> Link: https://lore.kernel.org/all/20240315124808.033ff58d@elisabethReported-by:
-
