- 31 Oct, 2004 40 commits
-
-
Greg Ungerer authored
Change 5280 and 5282 CPU support to be generic 528x family. Also add support for the new 527x ColdFire family. Signed-off-by:
Greg Ungerer <gerg@snapgear.com> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Add SIM hardware module definitions for the ColdFire 527x CPU family. Signed-off-by:
-
Matthew Wilcox authored
Looks like Al's patch to sparsify the byteorder code prevented use of the assembler-optimised code. Not that I can blame him -- three underscores are C-coded and two underscores are assembly-optimised.
-
Hirofumi Ogawa authored
If "utf8" option was specified and app uses VFAT_IOCTL_READDIR_BOTH ioctl, utf8_wcstombs() is used. utf8_wcstombs() doesn't add the nul terminate. Then fat_ioctl_filldir() uses a wrong length of name by strlen(). This patch passes the correct length to fat_ioctl_filldir(), and doesn't use nul terminate anymore. Many helps by Alex Villacís Lasso. Thanks. Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Hirofumi Ogawa authored
This is valid state if file was accessed by multiple processes at the same time. Signed-off-by:
-
Linus Torvalds authored
Note to self: any m68k patch that touches a SMP file is likely not worth it. Cset exclude: geert@linux-m68k.org[torvalds]|ChangeSet|20041101000206|42067
-
Geert Uytterhoeven authored
M68k: Remove duplicate includes (from Adrian Bunk) Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Geert Uytterhoeven authored
Sun 3: Fix modular XFS by exporting vmalloc_end Signed-off-by:
-
Geert Uytterhoeven authored
Reiserfs: Add missing #include <linux/sched.h> Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Disable SERIO_I8042 Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Add defconfig for Sun 3x (derived from the Debian config for Sun 3) Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Add defconfig for Sun 3 (based on the Debian config) Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Add defconfig for Q40 and Q60 (based on the Debian config) Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Add defconfig for MVME162, MVME166, and MVME167 (based on the Debian config) Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Add defconfig for MVME147 (based on the Debian config) Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Add defconfig for Macintosh (based on the Debian config) Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Add defconfig for HP9000/300 and HP9000/400 (based on the Debian config) Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Add defconfig for BVME4000 and BVME6000 (based on the Debian config) Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Add defconfig for Atari (based on the Debian config) Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Add defconfig for Apollo (derived from the Debian config for HP9000/300) Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Add defconfig for Amiga (based on the Debian config) Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Update defconfig for 2.6.9 Signed-off-by:
-
Geert Uytterhoeven authored
smp_lock.h: Avoid recursive include Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Add 43 missing syscalls (up to 2.6.9) Signed-off-by:
-
Geert Uytterhoeven authored
MVME167 serial: Fix compilation by replacing the bottom half handler with a task queue handler, based on the Cyclades driver (from Kars de Jong) Signed-off-by:
-
Geert Uytterhoeven authored
Sun-3 Makefile: join short multi-line Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Add missing and remove superfluous #include <linux/config.h> Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Fix incorrect config comment in check_bugs() Signed-off-by:
-
Geert Uytterhoeven authored
HP300: Convert DIO bus and its drivers to the new driver model (from Jochen Friedrich). Signed-off-by:
Jochen Friedrich <jochen@scram.de> Signed-off-by:
Kars de Jong <jongk@linux-m68k.org> Signed-off-by:
-
Geert Uytterhoeven authored
As pci_find_device() is going away I have replaced this call with pci_get_device(). Signed-off-by:
Hanna Linder <hannal@us.ibm.com> Signed-off-by:
-
Geert Uytterhoeven authored
HP300: Fix typos in the DIO output. The SCSI chip is a 98265A, not a 98625A. NetBSD has this already fixed. Signed-off-by:
-
Geert Uytterhoeven authored
HP300 configuration updates from Kars de Jong: - Updated help for CONFIG_HP300 - DIO support defaults to y - HP DCA support depends on SERIAL_8250 - Added HP APCI option - Removed HP DCA from SERIAL_CONSOLE dependencies Signed-off-by:
-
Geert Uytterhoeven authored
Created HP300 8250 driver which supports DCA and APCI ports. Support for APCI is still experimental and unfinished (no support for interrupts). Console support should be okay though (from Kars de Jong) Signed-off-by:
-
Geert Uytterhoeven authored
M68k I/O updates from Kars de Jong and Jochen Friedrich: - To be able to use the generic 8250 driver on the HP300, added dummy implementations of inb(), inb_p(), outb() and outb_p() - Added implementations of readb(), writeb(), readl(), and writel() for the 8250 driver Signed-off-by: -
Geert Uytterhoeven authored
HP300 frame buffer device updates from Kars de Jong: - Updated to use the new DIO semantics - Added support for DIO-II boards - Added support for 8 bit Catseye boards - Fixed colour map support - Added fb_blank() implementation - Added fb_fillrect() implementation - Added fb_sync() implementation Signed-off-by:
-
Geert Uytterhoeven authored
HP300 LANCE updates from Kars de Jong: - Updated HP LANCE driver to use the new DIO semantics - If only HP LANCE or MVME147 LANCE is selected, enable compile-time choice of LANCE register access. If both are defined, go through the function pointer - Added support for CONFIG_NET_POLL_CONTROLLER - Fixed problem with disabling board interrupts in hplance_close() which caused the driver to lock up Signed-off-by: -
Geert Uytterhoeven authored
HP300 DIO bus updates from Kars de Jong: - Removed kludges for internal HPIB, no need to handle it as a DIO device - Removed dio_scodetoviraddr() and introduced dio_scodetophysaddr() instead, to be able to support DIO-II - Removed trailing white space - Changed error return code of dio_find() from 0 to -1, since select code 0 is a valid select code - Added support for DIO-II - Fixed problem with DIO_ENCODE_ID() Signed-off-by: -
Geert Uytterhoeven authored
Update of HP300 core support to use bootinfo etc. (from Kars de Jong) Signed-off-by:
-
Matthew Wilcox authored
Add comments and references for relied-upon translations Add some extra comment to space_check Add support for prober and probew in our non-access TLB fault emulation path Force sr2 to 0 in syscall_restore Committed-by:Carlos O'Donell <carlos@parisc-linux.org>
-
Matthew Wilcox authored
Fix compile error when HPUX support is enabled Committed-by:Randolph Chung <tausq@parisc-linux.org>
-
