Add an interface quirk flag to suppress I/O during interface disable.

This is needed to prevent I/O to the bootrom during controlled
connection tear down (e.g. eject or driver unbind). This will be more
obvious with the new connection tear-down procedure.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Clean up bootrom quirk handling in preparation for addition of further
flags.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add new helper to disable connections to interfaces that have already
been disconnected (e.g. forcibly removed).

The connection tear-down procedure differs enough depending on whether
the interface is still present or already gone to warrant a dedicated
helper. This will become more obvious with the new tear-down procedure,
which involves I/O on the connection being tore down.

This also simplifies handling of the legacy bootrom, which does not
support the new tear-down operations.

Specifically, this allows us to remove the early control-connection
tear down during interface disable, and also avoids some error messages
currently printed during legacy mode switch (i.e. bootrom
boot-over-UniPro) and forcible removal.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Coccinelle reports that gb_svc_pwrmon_debugfs_init() has a block of
a for loop which is followed by an unnecessary semicolon.  Get rid
of that semicolon.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Coccinelle points out that the macro PTR_ERR_OR_ZERO() handles the
frequent case of converting a pointer into either error code (if its
value is an encoded error value) or 0 (otherwise).  Switch some code
in gb_power_supply_register() to use that macro.  I have verified
this is true of the kernel we're now working with (arche-6.0).
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Coccinelle points out that a call in gb_lights_channel_free() to
flush_work() is passed which is always non-null.   Prior to the
call, there is an unnecessary check to see if that address is null.
Get rid of the test.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Coccinelle points out that debugfs_remove_recursive() handles a null
argument properly, so there's no need to check for NULL before
making the call.  I have verified this is true of the kernel we're
now working with (arche-6.0).
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Running "make coccicheck" on the Greybus code reports that
gb_mmc_get_ro() and gb_mmc_get_cd() can return without releasing
the mutex it acquired if there's an error.  Fix this.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Running "make coccicheck" on the Greybus code discovered that
an error message in gb_camera_debugfs_init() was interpreting
the wrong value in reporting the error code.  Fix that.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Unique ids were reserved for CDSI0 and CDSI1 during _probe, however
missed to release those ids during disconnect. This causes a memory leak
of 128 bytes for each iteration of unipro_reset. Fix this.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

It is required to release all unique ids registered via ida_get_simple
to avoid any possible memory leak. cport_release() already exists with
special handling for ES2_CPORT_CDSI1, i.e. updating in_use flag without
removing associated ida.

So, added another API to release reserved cports CDSI0 and CDSI1. This
is intended to  be used only during es2_destroy().
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Define a new gb_module trace point event class, used to trace events
associated with the interface abstraction.  Define four basic trace
points for this--creation time, drop of last reference, before
registring interfaces and after de-registering them.  In addition,
define traces for activating and deactivating, and enabling and
disabling an interface.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Define a new gb_module trace point event class, used to trace events
associated with the module abstraction.  Define four basic trace
points for this--creation time, drop of last reference, before
registring interfaces and after de-registering them.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Currently there are two trace points defined for the Greybus host
device structure.  One records information when a message gets sent,
and another when it gets received.  Neither of these is really a
host device event.

We have trace points defined for messages that dump information
about all sent and received messages.  As a result, the information
about sending messages over a host is redundant, and can go away.
(Note that the message traces may need a little refinement so they
produce all desired information.)

Instead of these trace points, define some that are directly
related to the host device abstraction: when one is created,
added, deleted, or released (destroyed).  These do not require
a CPort ID or payload size, so eliminate those two parameters
from the host device trace point prototype.  Change the trace
information recorded for a host device to be just a subset of
interesting fields in a host device.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

In gb_operation_put_active(), the wrong trace point is being called.
Fix that.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Core will never call host-device callbacks with invalid arguments (and
that would still need to be verified in bridge firmware anyway), so
remove the redundant and insufficient sanity check from the callbacks.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The interface svc-resource helper are used to enable as well as disable
the corresponding SVC resources so make sure the error messages reflect
that.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The numbering of gbphy devices is going to start from 1 and not 0.
Reflect the same in sysfs hierarchy.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

These were left in the earlier renaming series, fix them as well.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

commit 6d94670 gpbridge: rename 'gpbridge' to 'gbphy' everywhere
missed renaming the loopback test app. So do it too.

Testing done: complie and run loopback test
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The issue is, as part of kernel-only build we started seeing
failures in SVC FW flashing. It was reproducible easily in kernel-only
build, but never observed on Android build.

During debugging, there were couple of observations,

1. If SVC clock enabled and disables (which is REFCLK_MAIN), then SVC FW
   flashing works.
2. If we do not switch SVC to HSE (external clock source) it works.
   Recently, SVC code has been updated to switch HSE clock, so removing
   it (remove/skip rcc_switch_ara_pll() fn) would use internal clock only.

As per STM32 spec, for flashing through USART we do not need
to enable HSE, but the above observation contradicts with it.

There is still something missing in terms of understanding of how STM32
device functions as far as Flashing is concerned. There is something
hidden in HW, which probably still need to identify.

So as a interim solution we will enable clock for FW_FLASHING state,
which seems to be fixing the issue here.

Testing Done: Tested on EVT1.5 with arche6.0 and kernel-only build.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Make sure that, transition to active state happens only from OFF state.
Instead of imposing the restriction to user-space, driver internally
switches to OFF state and then to ACTIVE state.

Testing Done: Tested on EVT1.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Make arche_platform_fw_flashing_seq() return error value, needed
later when we add clock enable support for FW flashing.

Testing Done: Tested on EVT1.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This reverts commit 29fee8c55b59bb6ac59b99a0563c89c514cba42b.

This change and its companion NuttX changes seem to be triggering a
storm of POWERMODEIND switch interrupts on the SVC.
Signed-off-by: Jeffrey Carlyle <jcarlyle@google.com>
Acked-by: Sandeep Patil <sspatil@google.com>

Bring the gb_svc_intf_set_power_mode() up-to-date with the current Greybus
specification.  This largely involves adding more members to the structure
sent across the wire.  Also change the camera code to use the new
operation properly, with default values passed for the new necessary
arguments.  The correctness of these default values is confirmed via testing
and by asking Rob Johnson.

Testing Done: Took a picture with a camera module, received error code
when passing deliberately incorrect values for new parameters, got proper
-EIO and Greybus result code printed when operation stopped halfway
through.

Associated Firmware Changes: 6810-6812 on Gerrit for SW-1239, 6870 and
5612-5613 on Gerrit for SW-2945
Signed-off-by: Eli Sennesh <esennesh@leaflabs.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Tip-of-tree is exhibiting a backtrace when loading-up the set of greybus
kernel modules due to calling arche_platform_wd_irq_en() directly after a
call to devm_request_threaded_irq().

At the point we call arch_platform_wd_irq_en() the relevant IRQ will
already be enabled. What we want to do in this situation is configure the
GPIO line as an input. This patch fixes the backtrace by supplanting
arche_platform_wd_irq_en() with
gpio_direction_input(arche_pdata->wake_detect_gpio) in
arche_platform_probe().

WARNING: at msm-ara-3.10/kernel/irq/manage.c:457 __enable_irq+0x74/0xc0()
Unbalanced enable for IRQ 687
Modules linked in: gb_arche(O+) gb_camera(O) gb_es2(O) gb_vibrator(O)
gb_raw(O) gb_power_supply(O) gb_loopback(O) gb_light(O) gb_hid(O)
greybus(O)
CPU: 0 PID: 415 Comm: insmod Tainted: G        W  O 3.10.78-g2a4dec8 #65
Call trace:
[<ffffffc000206adc>] dump_backtrace+0x0/0x248
[<ffffffc000206d34>] show_stack+0x10/0x1c
[<ffffffc000c6c698>] dump_stack+0x1c/0x28
[<ffffffc00021c95c>] warn_slowpath_common+0x74/0x9c
[<ffffffc00021c9d0>] warn_slowpath_fmt+0x4c/0x58
[<ffffffc000269d7c>] __enable_irq+0x70/0xc0
[<ffffffc000269e34>] enable_irq+0x68/0x7c
[<ffffffbffc0609b4>] arche_platform_probe+0x3b4/0x4f4 [gb_arche]
[<ffffffc0005ace30>] platform_drv_probe+0x14/0x20
[<ffffffc0005ab980>] driver_probe_device+0x160/0x374
[<ffffffc0005abc40>] __driver_attach+0x60/0x90
[<ffffffc0005aa768>] bus_for_each_dev+0x74/0x94
[<ffffffc0005ab2c4>] driver_attach+0x1c/0x28
[<ffffffc0005aae74>] bus_add_driver+0x124/0x248
[<ffffffc0005ac270>] driver_register+0x94/0x110
[<ffffffc0005ad3c4>] platform_driver_register+0x58/0x64
[<ffffffbffc065020>] $x+0x20/0x58 [gb_arche]
[<ffffffc0002007dc>] do_one_initcall+0xb0/0x14c
[<ffffffc00028252c>] load_module+0x19d0/0x1b18
[<ffffffc00028278c>] SyS_init_module+0x118/0x130
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiermath@linaro.org>
Tested-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Topology data pointer was mistakenly set to NULL before freeing it. Fix
this.

Fixes: 64a86d9ba850 ("audio: Add module specific driver")
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Commit 0917cba11 ("legacy: remove legacy driver support")
removed protocol.c, however, the corresponding target in the Makefile
was not removed therefore broken the build.

Testing Done:
- Build & boot on EVT1.5
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

I believe that duplicating the tracepoint name in comments prior to
the tracepoint is redundant, and doesn't add a lot of value.

I also believe that we can provide a little more information about
what exactly an event means, or when exactly it is called.

I don't claim this is a huge improvement, but it's a proposal.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Each message event has a set of comments preceeding its definition.
One of them, "location", indicates where that event is used.  I
am certain that this comment will become out of date very easily.
Hopefully just the name of the event is a good enough suggestion
about where it will be used.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

A tracepoint event is defined with TP_PROTO() and TP_ARGS macros
that match that of the event's class.  A lot of repetition (and
opportunity for inadvertent errors) in tracepoint event definitions
can be eliminated by using a macro.  Define and use class-specific
event definition macros for gb_message and gb_host_device class
events.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Jeffrey Carlyle <jcarlyle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Define a new gb_operation event class, and define and use trace
events that record when an operation is created, finally destroyed,
and when its active count changes.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This patch removes the greybus legacy driver support
Signed-off-by: David Lin <dtwlin@google.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Convert the legacy camera protocol driver to a bundle driver.

Modules now can (and must) declare the camera data cport in their
manifest as the data connection isn't hardcoded anymore.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Just reword it to make it sound better.

Compile tested.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

In one of the error cases we aren't destroying the connections created
earlier. Fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Return -EREMOTEIO consistently for unspecified remote errors (e.g. a
failed DME attribute read due to a remote UniPro error).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Errno -ENOSYS is reserved for missing syscalls, replace it with
-EOPNOTSUPP for the the two stub operations that used it.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Errno -ENOSYS is reserved for missing syscalls, replace it with -ENOMSG.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Now, since AP module does not send any signal to SVC, so it
automatically restricts the wake/detect gpio to input.
So rename assert_wakedetect() fn to arche_platform_wd_irq_en(),
as per implementation.

Testing Done: Tested on EVT1.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>