- 13 Sep, 2017 20 commits
-
-
Linus Torvalds authored
commit f007cad1 upstream. This reverts commit 81f95076. It causes random failures of firmware loading at resume time (well, random for me, it seems to be more reliable for others) because the firmware disabling is not actually synchronous with any particular resume event, and at least the btusb driver that uses a workqueue to load the firmware at resume seems to occasionally hit the "firmware loading is disabled" logic because the firmware loader hasn't gotten the resume event yet. Some kind of sanity check for not trying to load firmware when it's not possible might be a good thing, but this commit was not it. Greg seems to have silently suffered the same issue, and pointed to the likely culprit, and Gabriel C verified the revert fixed it for him too. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Pointed-at-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by:
Gabriel C <nix.or.die@gmail.com> Cc: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by:
-
Brijesh Singh authored
commit 64531a3b upstream. Commit 14727754 ("kvm: svm: Add support for additional SVM NPF error codes", 2016-11-23) added a new error code to aid nested page fault handling. The commit unprotects (kvm_mmu_unprotect_page) the page when we get a NPF due to guest page table walk where the page was marked RO. However, if an L0->L2 shadow nested page table can also be marked read-only when a page is read only in L1's nested page table. If such a page is accessed by L2 while walking page tables it can cause a nested page fault (page table walks are write accesses). However, after kvm_mmu_unprotect_page we may get another page fault, and again in an endless stream. To cover this use case, we qualify the new error_code check with vcpu->arch.mmu_direct_map so that the error_code check would run on L1 guest, and not the L2 guest. This avoids hitting the above scenario. Fixes: 14727754 Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Brijesh Singh <brijesh.singh@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Laurent Dufour authored
commit de0c799b upstream. Seen while reading the code, in handle_mm_fault(), in the case arch_vma_access_permitted() is failing the call to mem_cgroup_oom_disable() is not made. To fix that, move the call to mem_cgroup_oom_enable() after calling arch_vma_access_permitted() as it should not have entered the memcg OOM. Link: http://lkml.kernel.org/r/1504625439-31313-1-git-send-email-ldufour@linux.vnet.ibm.com Fixes: bae473a4 ("mm: introduce fault_env") Signed-off-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Acked-by:
Kirill A. Shutemov <kirill@shutemov.name> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Michal Hocko authored
commit b4ccec41 upstream. online_mem_sections() accidentally marks online only the first section in the given range. This is a typo which hasn't been noticed because I haven't tested large 2GB blocks previously. All users of pfn_to_online_page would get confused on the the rest of the pfn range in the block. All we need to fix this is to use iterator (pfn) rather than start_pfn. Link: http://lkml.kernel.org/r/20170904112210.3401-1-mhocko@kernel.org Fixes: 2d070eab ("mm: consider zone which is not fully populated to have holes") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by:
-
David Rientjes authored
commit b6b1fd2a upstream. Free frontswap_map if an error is encountered before enable_swap_info(). Signed-off-by:
David Rientjes <rientjes@google.com> Reviewed-by:
"Huang, Ying" <ying.huang@intel.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Darrick J. Wong authored
commit 8606a1a9 upstream. If initializing a small swap file fails because the swap file has a problem (holes, etc.) then we need to free the cluster info as part of cleanup. Unfortunately a previous patch changed the code to use kvzalloc but did not change all the vfree calls to use kvfree. Found by running generic/357 from xfstests. Link: http://lkml.kernel.org/r/20170831233515.GR3775@magnolia Fixes: 54f180d3 ("mm, swap: use kvzalloc to allocate some swap data structures") Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
-
Andy Lutomirski authored
commit 23d98c20 upstream. Those are funny cases. Make sure they work. (Something is screwy with signal handling if a selector is 1, 2, or 3. Anyone who wants to dive into that rabbit hole is welcome to do so.) Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chang Seok <chang.seok.bae@intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Shuah Khan authored
commit df9c011c upstream. When a test exits with skip exit code of 4, "make run_destructive_tests" halts testing. Fix run_destructive_tests target to handle error exit codes. Reported-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
John Stultz authored
commit 98b74e1f upstream. Change default arguments for leap-a-day to always set the time each iteration (rather then waiting for midnight UTC), and to only run 10 interations (rather then infinite). If one wants to wait for midnight UTC, they can use the new -w flag, and we add a note to the argument help that -i -1 will run infinitely. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by:
-
Ian W MORRISON authored
commit f957dd3c upstream. The firmware feature check introduced for multi-scheduled scan is also failing for bcm4345 devices resulting in a firmware crash. The reason for this crash has not yet been root cause so this patch avoids the feature check for those device as a short-term fix. Fixes: 9fe929aa ("brcmfmac: add firmware feature detection for gscan feature") Signed-off-by:
Ian W MORRISON <ianwmorrison@gmail.com> Acked-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Eric Dumazet authored
commit bc9ae224 upstream. __radix_tree_preload() only disables preemption if no error is returned. So we really need to make sure callers always check the return value. idr_preload() contract is to always disable preemption, so we need to add a missing preempt_disable() if an error happened. Similarly, ida_pre_get() only needs to call preempt_enable() in the case no error happened. Link: http://lkml.kernel.org/r/1504637190.15310.62.camel@edumazet-glaptop3.roam.corp.google.com Fixes: 0a835c4f ("Reimplement IDR and IDA using the radix tree") Fixes: 7ad3d4d8 ("ida: Move ida_bitmap to a percpu variable") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Larry Finger authored
commit 6d622692 upstream. In commit 87d8a9f3 ("rtlwifi: btcoex: call bind to setup btcoex"), the code turns on a call to exhalbtc_bind_bt_coex_withadapter(). This routine contains a bug that causes incorrect antenna selection for those HP laptops with only one antenna and an incorrectly programmed EFUSE. These boxes are the ones that need the ant_sel module parameter. Fixes: 87d8a9f3 ("rtlwifi: btcoex: call bind to setup btcoex") Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by:
-
Larry Finger authored
commit a33fcba6 upstream. In commit bcd37f4a ("rtlwifi: btcoex: 23b 2ant: let bt transmit when hw initialisation done"), there is an additional error when the module parameter ant_sel is used to select the auxilary antenna. The error is that the antenna selection is not checked when writing the antenna selection register. Fixes: bcd37f4a ("rtlwifi: btcoex: 23b 2ant: let bt transmit when hw initialisation done") Signed-off-by:
-
Aleksa Sarai authored
commit 6c6b5a39 upstream. Several distributions mount the "proper root" as ro during initrd and then remount it as rw before pivot_root(2). Thus, if a rescan had been aborted by a previous shutdown, the rescan would never be resumed. This issue would manifest itself as several btrfs ioctl(2)s causing the entire machine to hang when btrfs_qgroup_wait_for_completion was hit (due to the fs_info->qgroup_rescan_running flag being set but the rescan itself not being resumed). Notably, Docker's btrfs storage driver makes regular use of BTRFS_QUOTA_CTL_DISABLE and BTRFS_IOC_QUOTA_RESCAN_WAIT (causing this problem to be manifested on boot for some machines). Cc: Jeff Mahoney <jeffm@suse.com> Fixes: b382a324 ("Btrfs: fix qgroup rescan resume on mount") Signed-off-by:
Aleksa Sarai <asarai@suse.de> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Tested-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Daniel Verkamp authored
commit 40a5fce4 upstream. The default host NQN, which is generated based on the host's UUID, does not follow the UUID-based NQN format laid out in the NVMe 1.3 specification. Remove the "NVMf:" portion of the NQN to match the spec. Signed-off-by:
Daniel Verkamp <daniel.verkamp@intel.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Abhishek Sahu authored
commit 10777de5 upstream. The configuration for BCH is not correct in the current driver. The ECC_CFG_ECC_DISABLE bit defines whether to enable or disable the BCH ECC in which 0x1 : BCH_DISABLED 0x0 : BCH_ENABLED But currently host->bch_enabled is being assigned to BCH_DISABLED. Fixes: c76b78d8 ("mtd: nand: Qualcomm NAND controller driver") Signed-off-by:
Abhishek Sahu <absahu@codeaurora.org> Reviewed-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Abhishek Sahu authored
commit d8a9b320 upstream. The NAND page read fails without complete boot chain since NAND_DEV_CMD_VLD value is not proper. The default power on reset value for this register is 0xe - ERASE_START_VALID | WRITE_START_VALID | READ_STOP_VALID The READ_START_VALID should be enabled for sending PAGE_READ command. READ_STOP_VALID should be cleared since normal NAND page read does not require READ_STOP command. Fixes: c76b78d8 ("mtd: nand: Qualcomm NAND controller driver") Reviewed-by:
-
Boris Brezillon authored
commit 3bff08df upstream. Commit a894cf6c ("mtd: nand: mxc: switch to mtd_ooblayout_ops") introduced a bug in the OOB layout description. Even if the driver claims that 3 ECC bytes are reserved to protect 512 bytes of data, it's actually 5 ECC bytes to protect 512+6 bytes of data (some OOB bytes are also protected using extra ECC bytes). Fix the mxc_v1_ooblayout_{free,ecc}() functions to reflect this behavior. Signed-off-by:
-
Martin Blumenstingl authored
commit fd213b5b upstream. According to the datasheet of the H27UCG8T2BTR the NAND Technology field (6th byte of the "Device Identifier Description", bits 0-2) the following values are possible: - 0x0 = 48nm - 0x1 = 41nm - 0x2 = 32nm - 0x3 = 26nm - 0x4 = 20nm - (all others are reserved) Fix this by extending the mask for this field to allow detecting value 0x4 (20nm) as valid NAND technology. Without this the detection of the ECC requirements fails, because the code assumes that the device is a 48nm device (0x4 & 0x3 = 0x0) and aborts with "Invalid ECC requirements" because it cannot map the "ECC Level". Extending the mask makes the ECC requirement detection code recognize this chip as <= 26nm and sets up the ECC step size and ECC strength correctly. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Fixes: 78f3482d ("mtd: nand: hynix: Rework NAND ID decoding to extract more information") Signed-off-by:
-
Lothar Waßmann authored
commit 69fc0129 upstream. commit c51d0ac5 ("mtd: nand: Move Samsung specific init/detection logic in nand_samsung.c") introduced a regression for Samsung SLC NAND chips. Prior to this commit chip->bits_per_cell was initialized by calling nand_get_bits_per_cell() before using nand_is_slc(). With the offending commit this call is skipped, leaving chip->bits_per_cell cleared to zero when the manufacturer specific '.detect' function calls nand_is_slc() which in turn interprets bits_per_cell != 1 as indication for an MLC chip. The effect is that e.g. a K9F1G08U0F NAND chip is falsely detected as MLC NAND with 4KiB page size rather than SLC with 2KiB page size. Add a call to nand_get_bits_per_cell() before calling the .detect hook function in nand_manufacturer_detect(), so that the nand_is_slc() calls in the manufacturer specific code will return correct results. Fixes: c51d0ac5 ("mtd: nand: Move Samsung specific init/detection logic in nand_samsung.c") Signed-off-by:
Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by:
-
- 10 Sep, 2017 1 commit
-
-
Greg Kroah-Hartman authored
-
- 09 Sep, 2017 19 commits
-
-
Sven Joachim authored
commit 1d9b168d upstream. Commit f70e4df2 ("rtlwifi: Add code to read new versions of firmware") added code to load an old firmware file if the new one is not available. Unfortunately that code is never reached because request_firmware_nowait() does not wait for the firmware to show up and returns 0 even if the file is not there. Use the existing fallback mechanism introduced by commit 62009b7f ("rtlwifi: rtl8192cu: Add new firmware") instead. Fixes: f70e4df2 ("rtlwifi: Add code to read new versions of firmware") Signed-off-by:
Sven Joachim <svenjoac@gmx.de> Signed-off-by:
-
Souptick Joarder authored
commit f2764f61 upstream. This patch will fix memory leak when firmware request fails Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Acked-by:
-
Bjorn Andersson authored
commit 08ab58d9 upstream. As of_device_get_modalias() returns the number of bytes that would have been written to the target string, regardless of how much did fit in the buffer, it's possible that the returned index points beyond the buffer passed to of_device_modalias() - causing memory beyond the buffer to be null terminated. Fixes: 0634c295 ("of: Add function for generating a DT modalias with a newline") Cc: Rob Herring <robh@kernel.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Todd Poynor authored
commit 8d26f491 upstream. Commit 1bc0eb04 ("scsi: sg: protect accesses to 'reserved' page array") adds needed concurrency protection for the "reserve" buffer. Some checks that are initially made outside the lock are replicated once the lock is taken to ensure the checks and resulting decisions are made using consistent state. The check that a request with flag SG_FLAG_MMAP_IO set fits in the reserve buffer also needs to be performed again under the lock to ensure the reserve buffer length compared against matches the value in effect when the request is linked to the reserve buffer. An -ENOMEM should be returned in this case, instead of switching over to an indirect buffer as for non-MMAP_IO requests. Signed-off-by:
Todd Poynor <toddpoynor@google.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Todd Poynor authored
commit 6a8dadcc upstream. Take f_mutex around mmap() processing to protect against races with the SG_SET_RESERVED_SIZE ioctl. Ensure the reserve buffer length remains consistent during the mapping operation, and set the "mmap called" flag to prevent further changes to the reserved buffer size as an atomic operation with the mapping. [mkp: fixed whitespace] Signed-off-by:
-
Andrey Korolyov authored
commit 591b6bb6 upstream. Several legacy devices such as Geode-based Cisco ASA appliances and DB800 development board do possess CS5536 IDE controller with different PCI id than existing one. Using pata_generic is not always feasible as at least DB800 requires MSR quirk from pata_cs5536 to be used with vendor firmware. Signed-off-by:
Andrey Korolyov <andrey@xdel.ru> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Christoph Hellwig authored
commit f723fa4e upstream. Intel AHCI controllers that also hide NVMe devices in their bar can't use MSI interrupts, so disable them. Reported-by:
John Loy <john.robert.loy@gmail.com> Tested-by:
-
Ben Hutchings authored
commit fbf1c41f upstream. Commit 0a94efb5 ("workqueue: implicit ordered attribute should be overridable") introduced a __WQ_ORDERED_EXPLICIT flag but gave it the same value as __WQ_LEGACY. I don't believe these were intended to mean the same thing, so renumber __WQ_ORDERED_EXPLICIT. Fixes: 0a94efb5 ("workqueue: implicit ordered attribute should be ...") Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Maarten Lankhorst authored
commit 813a7e16 upstream. Make it more clear that post commit return ret is really return 0, and add a missing drm_atomic_helper_cleanup_planes when drm_atomic_helper_wait_for_fences fails. Fixes: 839ca903 ("drm/nouveau/kms/nv50: transition to atomic interfaces internally") Cc: Ben Skeggs <bskeggs@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170711143314.2148-2-maarten.lankhorst@linux.intel.comReviewed-by:
Sean Paul <seanpaul@chromium.org> [mlankhorst: Use if (ret) to remove the goto in success case.] Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Ilia Mirkin authored
commit bc60c90f upstream. It appears that MSI does not work on either G5 PPC nor on a E5500-based platform, where other hardware is reported to work fine with MSI. Both tests were conducted with NV4x hardware, so perhaps other (or even this) hardware can be made to work. It's still possible to force-enable with config=NvMSI=1 on load. Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Christian Borntraeger authored
commit fa41ba0d upstream. Right now there is a potential hang situation for postcopy migrations, if the guest is enabling storage keys on the target system during the postcopy process. For storage key virtualization, we have to forbid the empty zero page as the storage key is a property of the physical page frame. As we enable storage key handling lazily we then drop all mappings for empty zero pages for lazy refaulting later on. This does not work with the postcopy migration, which relies on the empty zero page never triggering a fault again in the future. The reason is that postcopy migration will simply read a page on the target system if that page is a known zero page to fault in an empty zero page. At the same time postcopy remembers that this page was already transferred - so any future userfault on that page will NOT be retransmitted again to avoid races. If now the guest enters the storage key mode while in postcopy, we will break this assumption of postcopy. The solution is to disable the empty zero page for KVM guests early on and not during storage key enablement. With this change, the postcopy migration process is guaranteed to start after no zero pages are left. As guest pages are very likely not empty zero pages anyway the memory overhead is also pretty small. While at it this also adds proper page table locking to the zero page removal. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Acked-by:
Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Michael Moese authored
commit acf5e051 upstream. This patch adds the resources and DMI ID's for the MEN SC31, which uses a different address region to map the LPC bus than the one used for the existing SC24. Signed-off-by:
Michael Moese <michael.moese@men.de> [jth add stable tag] Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Brian Norris authored
commit 4b5dde2d upstream. mwifiex records information about various channels as it receives scan information. It does this by appending to a buffer that was sized to the max number of supported channels on any band, but there are numerous problems: (a) scans can return info from more than one band (e.g., both 2.4 and 5 GHz), so the determined "max" is not large enough (b) some firmware appears to return multiple results for a given channel, so the max *really* isn't large enough (c) there is no bounds checking when stashing these stats, so problems (a) and (b) can easily lead to buffer overflows Let's patch this by setting a slightly-more-correct max (that accounts for a combination of both 2.4G and 5G bands) and adding a bounds check when writing to our statistics buffer. Due to problem (b), we still might not properly report all known survey information (e.g., with "iw <dev> survey dump"), since duplicate results (or otherwise "larger than expected" results) will cause some truncation. But that's a problem for a future bugfix. (And because of this known deficiency, only log the excess at the WARN level, since that isn't visible by default in this driver and would otherwise be a bit too noisy.) Fixes: bf354433 ("mwifiex: channel statistics support for mwifiex") Cc: Avinash Patil <patila@marvell.com> Cc: Xinming Hu <huxm@marvell.com> Signed-off-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by:
Ganapathi Bhat <gbhat@marvell.com> Signed-off-by:
-
Edwin Török authored
commit 55acdd92 upstream. Can be reproduced when running dlm_controld (tested on 4.4.x, 4.12.4): # seq 1 100 | xargs -P0 -n1 dlm_tool join # seq 1 100 | xargs -P0 -n1 dlm_tool leave misc_register fails due to duplicate sysfs entry, which causes dlm_device_register to free ls->ls_device.name. In dlm_device_deregister the name was freed again, causing memory corruption. According to the comment in dlm_device_deregister the name should've been set to NULL when registration fails, so this patch does that. sysfs: cannot create duplicate filename '/dev/char/10:1' ------------[ cut here ]------------ warning: cpu: 1 pid: 4450 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x56/0x70 modules linked in: msr rfcomm dlm ccm bnep dm_crypt uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev btusb media btrtl btbcm btintel bluetooth ecdh_generic intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm snd_hda_codec_hdmi irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel thinkpad_acpi pcbc nvram snd_seq_midi snd_seq_midi_event aesni_intel snd_hda_codec_realtek snd_hda_codec_generic snd_rawmidi aes_x86_64 crypto_simd glue_helper snd_hda_intel snd_hda_codec cryptd intel_cstate arc4 snd_hda_core snd_seq snd_seq_device snd_hwdep iwldvm intel_rapl_perf mac80211 joydev input_leds iwlwifi serio_raw cfg80211 snd_pcm shpchp snd_timer snd mac_hid mei_me lpc_ich mei soundcore sunrpc parport_pc ppdev lp parport autofs4 i915 psmouse e1000e ahci libahci i2c_algo_bit sdhci_pci ptp drm_kms_helper sdhci pps_core syscopyarea sysfillrect sysimgblt fb_sys_fops drm wmi video cpu: 1 pid: 4450 comm: dlm_test.exe not tainted 4.12.4-041204-generic hardware name: lenovo 232425u/232425u, bios g2et82ww (2.02 ) 09/11/2012 task: ffff96b0cbabe140 task.stack: ffffb199027d0000 rip: 0010:sysfs_warn_dup+0x56/0x70 rsp: 0018:ffffb199027d3c58 eflags: 00010282 rax: 0000000000000038 rbx: ffff96b0e2c49158 rcx: 0000000000000006 rdx: 0000000000000000 rsi: 0000000000000086 rdi: ffff96b15e24dcc0 rbp: ffffb199027d3c70 r08: 0000000000000001 r09: 0000000000000721 r10: ffffb199027d3c00 r11: 0000000000000721 r12: ffffb199027d3cd1 r13: ffff96b1592088f0 r14: 0000000000000001 r15: ffffffffffffffef fs: 00007f78069c0700(0000) gs:ffff96b15e240000(0000) knlgs:0000000000000000 cs: 0010 ds: 0000 es: 0000 cr0: 0000000080050033 cr2: 000000178625ed28 cr3: 0000000091d3e000 cr4: 00000000001406e0 call trace: sysfs_do_create_link_sd.isra.2+0x9e/0xb0 sysfs_create_link+0x25/0x40 device_add+0x5a9/0x640 device_create_groups_vargs+0xe0/0xf0 device_create_with_groups+0x3f/0x60 ? snprintf+0x45/0x70 misc_register+0x140/0x180 device_write+0x6a8/0x790 [dlm] __vfs_write+0x37/0x160 ? apparmor_file_permission+0x1a/0x20 ? security_file_permission+0x3b/0xc0 vfs_write+0xb5/0x1a0 sys_write+0x55/0xc0 ? sys_fcntl+0x5d/0xb0 entry_syscall_64_fastpath+0x1e/0xa9 rip: 0033:0x7f78083454bd rsp: 002b:00007f78069bbd30 eflags: 00000293 orig_rax: 0000000000000001 rax: ffffffffffffffda rbx: 0000000000000006 rcx: 00007f78083454bd rdx: 000000000000009c rsi: 00007f78069bee00 rdi: 0000000000000005 rbp: 00007f77f8000a20 r08: 000000000000fcf0 r09: 0000000000000032 r10: 0000000000000024 r11: 0000000000000293 r12: 00007f78069bde00 r13: 00007f78069bee00 r14: 000000000000000a r15: 00007f78069bbd70 code: 85 c0 48 89 c3 74 12 b9 00 10 00 00 48 89 c2 31 f6 4c 89 ef e8 2c c8 ff ff 4c 89 e2 48 89 de 48 c7 c7 b0 8e 0c a8 e8 41 e8 ed ff <0f> ff 48 89 df e8 00 d5 f4 ff 5b 41 5c 41 5d 5d c3 66 0f 1f 84 ---[ end trace 40412246357cc9e0 ]--- dlm: 59f24629-ae39-44e2-9030-397ebc2eda26: leaving the lockspace group... bug: unable to handle kernel null pointer dereference at 0000000000000001 ip: [<ffffffff811a3b4a>] kmem_cache_alloc+0x7a/0x140 pgd 0 oops: 0000 [#1] smp modules linked in: dlm 8021q garp mrp stp llc openvswitch nf_defrag_ipv6 nf_conntrack libcrc32c iptable_filter dm_multipath crc32_pclmul dm_mod aesni_intel psmouse aes_x86_64 sg ablk_helper cryptd lrw gf128mul glue_helper i2c_piix4 nls_utf8 tpm_tis tpm isofs nfsd auth_rpcgss oid_registry nfs_acl lockd grace sunrpc xen_wdt ip_tables x_tables autofs4 hid_generic usbhid hid sr_mod cdrom sd_mod ata_generic pata_acpi 8139too serio_raw ata_piix 8139cp mii uhci_hcd ehci_pci ehci_hcd libata scsi_dh_rdac scsi_dh_hp_sw scsi_dh_emc scsi_dh_alua scsi_mod ipv6 cpu: 0 pid: 394 comm: systemd-udevd tainted: g w 4.4.0+0 #1 hardware name: xen hvm domu, bios 4.7.2-2.2 05/11/2017 task: ffff880002410000 ti: ffff88000243c000 task.ti: ffff88000243c000 rip: e030:[<ffffffff811a3b4a>] [<ffffffff811a3b4a>] kmem_cache_alloc+0x7a/0x140 rsp: e02b:ffff88000243fd90 eflags: 00010202 rax: 0000000000000000 rbx: ffff8800029864d0 rcx: 000000000007b36c rdx: 000000000007b36b rsi: 00000000024000c0 rdi: ffff880036801c00 rbp: ffff88000243fdc0 r08: 0000000000018880 r09: 0000000000000054 r10: 000000000000004a r11: ffff880034ace6c0 r12: 00000000024000c0 r13: ffff880036801c00 r14: 0000000000000001 r15: ffffffff8118dcc2 fs: 00007f0ab77548c0(0000) gs:ffff880036e00000(0000) knlgs:0000000000000000 cs: e033 ds: 0000 es: 0000 cr0: 0000000080050033 cr2: 0000000000000001 cr3: 000000000332d000 cr4: 0000000000040660 stack: ffffffff8118dc90 ffff8800029864d0 0000000000000000 ffff88003430b0b0 ffff880034b78320 ffff88003430b0b0 ffff88000243fdf8 ffffffff8118dcc2 ffff8800349c6700 ffff8800029864d0 000000000000000b 00007f0ab7754b90 call trace: [<ffffffff8118dc90>] ? anon_vma_fork+0x60/0x140 [<ffffffff8118dcc2>] anon_vma_fork+0x92/0x140 [<ffffffff8107033e>] copy_process+0xcae/0x1a80 [<ffffffff8107128b>] _do_fork+0x8b/0x2d0 [<ffffffff81071579>] sys_clone+0x19/0x20 [<ffffffff815a30ae>] entry_syscall_64_fastpath+0x12/0x71 ] code: f6 75 1c 4c 89 fa 44 89 e6 4c 89 ef e8 a7 e4 00 00 41 f7 c4 00 80 00 00 49 89 c6 74 47 eb 32 49 63 45 20 48 8d 4a 01 4d 8b 45 00 <49> 8b 1c 06 4c 89 f0 65 49 0f c7 08 0f 94 c0 84 c0 74 ac 49 63 rip [<ffffffff811a3b4a>] kmem_cache_alloc+0x7a/0x140 rsp <ffff88000243fd90> cr2: 0000000000000001 --[ end trace 70cb9fd1b164a0e8 ]-- Signed-off-by:
Edwin Török <edvin.torok@citrix.com> Signed-off-by:
David Teigland <teigland@redhat.com> Signed-off-by:
-
Luca Coelho authored
commit 3f7a5e13 upstream. We have a new PCI subsystem ID for 7265D. Add it to the list. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Dmitry Tunin authored
commit a81d72d2 upstream. T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3494 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Malcolm Priestley authored
commit fc81bab5 upstream. _rtl_pci_find_adapter fail path will jump to label fail3 for unsupported adapter types. However, on course for fail3 there will be call rtl_deinit_core before rtl_init_core. For the inclusion of checking pci_iounmap this fail can be moved to fail2. Fixes [ 4.492963] BUG: unable to handle kernel NULL pointer dereference at (null) [ 4.493067] IP: rtl_deinit_core+0x31/0x90 [rtlwifi] Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Ville Syrjälä authored
commit 56a91c49 upstream. On failure drm_atomic_get_private_obj_state() returns and error pointer instead of NULL. Adjust the checks in the callers to match. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: edb1ed1a ("drm/dp: Add DP MST helpers to atomically find and release vcpi slots") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170712155102.26276-1-ville.syrjala@linux.intel.comReviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Xiangliang.Yu authored
commit 9afae271 upstream. When fail to get needed page for pool, need to put allocated pages into pool. But current code has a miscalculation of allocated pages, correct it. Signed-off-by:
Xiangliang.Yu <Xiangliang.Yu@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Monk Liu <monk.liu@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
