Commit b73287f0 ("ASoC: soc-pcm: dpcm: fix playback/capture checks")
changed the meaning of dpcm_playback/dpcm_capture and now requires the
CPU DAI BE to aligned with those flags.

This broke all Amlogic cards with uni-directional backends (All gx and
most axg cards).

While I'm still confused as to how this change is an improvement, those
cards can't remain broken forever. Hopefully, next time an API change is
done like that, all the users will be updated as part of the change, and
not left to fend for themselves.

Fixes: b73287f0 ("ASoC: soc-pcm: dpcm: fix playback/capture checks")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200731120603.2243261-1-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

Previous updates to set dailink capabilities and check dailink
capabilities were based on a flawed assumption that all dais support
the same capabilities as the dailink. This is true for TDM
configurations but existing configurations use an amplifier and a
capture device on the same dailink, and the tests would prevent the
card from probing.

This patch modifies the snd_soc_dai_link_set_capabilities()
helper so that the dpcm_playback (resp. dpcm_capture) dailink
capabilities are set if at least one dai supports playback (resp. capture).

Likewise the checks are modified so that an error is reported only
when dpcm_playback (resp. dpcm_capture) is set but none of the CPU
DAIs support playback (resp. capture).

Fixes: 25612477 ('ASoC: soc-dai: set dai_link dpcm_ flags with a helper')
Fixes: b73287f0 ('ASoC: soc-pcm: dpcm: fix playback/capture checks')
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200723180533.220312-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patcheset is collection of fixes for the TDM input and output the
axg audio architecture. Its fixes:
 - slave mode format setting
 - g12 and sm1 skew offset
 - tdm clock inversion
 - standard daifmt props names which don't require a specific prefix

Jerome Brunet (4):
  ASoC: meson: axg-tdm-interface: fix link fmt setup
  ASoC: meson: axg-tdmin: fix g12a skew
  ASoC: meson: axg-tdm-formatters: fix sclk inversion
  ASoC: meson: cards: remove DT_PREFIX for standard daifmt properties

 sound/soc/meson/axg-tdm-formatter.c | 11 ++++++-----
 sound/soc/meson/axg-tdm-formatter.h |  1 -
 sound/soc/meson/axg-tdm-interface.c | 26 +++++++++++++++++---------
 sound/soc/meson/axg-tdmin.c         | 16 +++++++++++++++-
 sound/soc/meson/axg-tdmout.c        |  3 ---
 sound/soc/meson/meson-card-utils.c  |  2 +-
 6 files changed, 39 insertions(+), 20 deletions(-)

--
2.25.4

The allocation order of things in soc_new_pcm_runtime was changed to
move the device_register before the allocation of the rtd structure.
This was to allow the rtd allocation to be managed by devm. However
currently the sysfs entries are added by device_register and their
visibility depends on variables within the rtd structure, this causes
the pmdown_time and dapm_widgets sysfs entries to be missing for all
rtds.

Correct this issue by manually calling device_add_groups after the
appropriate information is available.

Fixes: d918a376 ("ASoC: soc-core: tidyup soc_new_pcm_runtime() alloc order")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200730120715.637-1-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

After carefully checking, it appears that both tdmout and tdmin require the
rising edge of the sclk they get to be synchronized with the frame sync
event (which should be a rising edge of lrclk).

TDMIN was improperly set before this patch. Remove the sclk_invert quirk
which is no longer needed and fix the sclk phase.

Fixes: 1a11d88f ("ASoC: meson: add tdm formatter base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200729154456.1983396-4-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

After carefully checking the result provided by the TDMIN on the g12a and
sm1 SoC families, the TDMIN skew offset appears to be 3 instead of 2 on the
axg.

Fixes: f01bc67f ("ASoC: meson: axg-tdm-formatter: rework quirks settings")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200729154456.1983396-3-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

The .set_fmt() callback of the axg tdm interface incorrectly
test the content of SND_SOC_DAIFMT_MASTER_MASK as if it was a
bitfield, which it is not.

Implement the test correctly.

Fixes: d60e4f1e ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200729154456.1983396-2-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

 Global EN register guide to off before AMP_EN register
 when amp disable sequence.
  - remove AMP_EN control before max98390_dac_event call
Signed-off-by: Steve Lee <steves.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20200724060058.19201-1-steves.lee@maximintegrated.comSigned-off-by: Mark Brown <broonie@kernel.org>

kabylake_ssp_fixup function uses snd_soc_dpcm to identify the
codecs DAIs. The HW parameters are changed based on the codec DAI of the
stream. The earlier approach to get snd_soc_dpcm was using container_of()
macro on snd_pcm_hw_params.

The structures have been modified over time and snd_soc_dpcm does not have
snd_pcm_hw_params as a reference but as a copy. This causes the current
driver to crash when used.

This patch changes the way snd_soc_dpcm is extracted. snd_soc_pcm_runtime
holds 2 dpcm instances (one for playback and one for capture). 2 codecs
on the SSP are dmic (capture) and speakers (playback). Based on the
stream direction, snd_soc_dpcm is extracted from snd_soc_pcm_runtime.

Tested for all use cases of the driver.
Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1595432147-11166-1-git-send-email-harshapriya.n@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Starting in commit cbc7a6b5 ("ASoC: soc-card: add
snd_soc_card_add_dai_link()"), error value from ASoc add_dai_link() is
no longer ignored.

The generic HDA machine driver relied on the old semantics to disable
i915 HDMI/DP audio codec at runtime. If no display codec was present,
add_dai_link() returned an error, but this was ignored and rest of the
card was successfully probed.

Fix the problem by changing the machine driver add_dai_link() to not
return an error in this case.

Fixes: cbc7a6b5 ("ASoC: soc-card: add snd_soc_card_add_dai_link()")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
BugLink: https://github.com/thesofproject/linux/issues/2261
Link: https://lore.kernel.org/r/20200714132804.3638221-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Partially reverts commit 128f825a ("ASoC: max98357a: move control
of SD_MODE to DAPM").

In order to have mute control of max98357 from machine drivers, commit
128f825a ("ASoC: max98357a: move control of SD_MODE to DAPM")
moves the control of SD_MODE from DAI ops to DAPM events.  However, pop
noise has been observed on rk3399-gru-kevin boards due to this commit.

The commit 128f825a caused sequence of DAI clocks and SD_MODE
changed on rk3399-gru-kevin boards.

With the commit 128f825a:
- SD_MODE will be set to 1 before DAI clocks start.
- SD_MODE will be set to 0 after DAI clocks stop.
As a result, pop noise.

Moves the control of SD_MODE back to DAI ops.  In the meantime, uses an
additional flag in DAPM event to provide chance of mute control for
machine drivers.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Tested-By: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20200721114232.2812254-1-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: Intel: machine driver updates for 5.9" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

Small patchset to harden the SoundWire machine driver, change bad
HIDs, update PLL settings and avoid memory leaks. Given that the
SoundWire core parts are not upstream it's probably not necessary to
provide the patches to stable branches.

Bard Liao (1):
  ASoC: Intel: sof_sdw_rt711: remove hard-coded codec name

Kai Vehmanen (2):
  ASoC: Intel: sof_sdw: add support for systems without i915 audio
  ASoC: Intel: sof_sdw: avoid crash if invalid DSP topology loaded

Libin Yang (1):
  ASoC: Intel: common: change match table ehl-rt5660

Pierre-Louis Bossart (1):
  ASoC: Intel: sof_sdw_rt711: remove properties in card remove

Yong Zhi (1):
  ASoC: intel: board: sof_rt5682: Update rt1015 pll input clk freq

 sound/soc/intel/boards/sof_rt5682.c           |  9 +++++-
 sound/soc/intel/boards/sof_sdw.c              | 31 +++++++++++++------
 sound/soc/intel/boards/sof_sdw_common.h       |  2 ++
 sound/soc/intel/boards/sof_sdw_hdmi.c         |  6 ++++
 sound/soc/intel/boards/sof_sdw_rt711.c        | 17 +++++++++-
 .../intel/common/soc-acpi-intel-ehl-match.c   |  2 +-
 6 files changed, 54 insertions(+), 13 deletions(-)

base-commit: 22e9b543
--
2.25.1

The lantiq-ssc driver uses internally an own workqueue to wait till the
data is not only written out of the FIFO but really written to the wire.
This workqueue is flushed while the SPI subsystem is working in some
other system workqueue.

The system workqueue is marked as WQ_MEM_RECLAIM, but the workqueue in
the lantiq-ssc driver does not use WQ_MEM_RECLAIM for now. Add this flag
too to prevent this warning.

This fixes the following warning:
[    2.975956] WARNING: CPU: 1 PID: 17 at kernel/workqueue.c:2614 check_flush_dependency+0x168/0x184
[    2.984752] workqueue: WQ_MEM_RECLAIM kblockd:blk_mq_run_work_fn is flushing !WQ_MEM_RECLAIM 1e100800.spi:0x0

Fixes: 891b7c5f ("mtd_blkdevs: convert to blk-mq")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://lore.kernel.org/r/20200717215648.20522-1-hauke@hauke-m.deSigned-off-by: Mark Brown <broonie@kernel.org>

This configuration is for EHL with the RT5660 codec. RT5660
should use "10EC5660" ID instead of "INTC1027".
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200717211337.31956-7-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

axg_card_add_tdm_loopback() misses to call kfree() in an error path. We
can use devm_kasprintf() to fix the issue, also improve maintainability.
So use it instead.

Fixes: c84836d7 ("ASoC: meson: axg-card: use modern dai_link style")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200717082242.130627-1-jingxiangfeng@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

The irq work will be manipulated by resume function, and it will report
the wrong jack type while the jack type is headphone in the button event.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200716030123.27122-1-oder_chiou@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

snd_byt_cht_es8316_mc_probe() misses to call put_device() in an error
path. Add the missed function call to fix it.

Fixes: ba49cf6f ("ASoC: Intel: bytcht_es8316: Add quirk for inverted jack detect")
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200714080918.148196-1-jingxiangfeng@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Enable Vref2 under long term using PLL2 to avoid clock unstable.
Signed-off-by: derek.fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/1594721600-29994-1-git-send-email-derek.fang@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

The HV/VREF should not turn off if the headphone jack plug-in.
This patch could solve the unexpected interrupt issue in some devices.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200709101345.11449-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

In DSP_A mode, BIT7 of IFACE should bit 0 according to datasheet (ie.
inverted frame clock is not support in this mode).
Signed-off-by: Puyou Lu <puyou.lu@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1593657056-4989-1-git-send-email-puyou.lu@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Clear BIT6 of INPPGA means not muted (Switch On).
Signed-off-by: Puyou Lu <puyou.lu@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1593657025-4903-1-git-send-email-puyou.lu@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: more fixes for dpcm checks" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

This is hopefully the last set of fixes to avoid probe errors due to
stricter checks of DAI capabilities introduced late in the 5.8 cycle.

Daniel Baluta (1):
  ASoC: SOF: imx: add min/max channels for SAI/ESAI on i.MX8/i.MX8M

Pierre-Louis Bossart (2):
  ASoC: soc-dai: set dai_link dpcm_ flags with a helper
  ASoC: Intel: bdw-rt5677: fix non BE conversion

 include/sound/soc-dai.h              |  1 +
 sound/soc/generic/audio-graph-card.c |  4 +--
 sound/soc/generic/simple-card.c      |  4 +--
 sound/soc/intel/boards/bdw-rt5677.c  |  1 +
 sound/soc/soc-dai.c                  | 38 ++++++++++++++++++++++++++++
 sound/soc/sof/imx/imx8.c             |  8 ++++++
 sound/soc/sof/imx/imx8m.c            |  8 ++++++
 7 files changed, 60 insertions(+), 4 deletions(-)

base-commit: a5911ac5
--
2.25.1

Merge series "ASoC: topology: fix error handling flow" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

While experimenting and introducing errors in Baytrail topology files
until I got them right, I encountered multiple kernel oopses and
memory leaks. This is a first batch to harden the code, but we should
probably think of a tool to fuzz the topology...

Pierre-Louis Bossart (5):
  ASoC: topology: fix kernel oops on route addition error
  ASoC: topology: fix tlvs in error handling for widget_dmixer
  ASoC: topology: use break on errors, not continue
  ASoC: topology: factor kfree(se) in error handling
  ASoC: topology: add more logs when topology load fails.

 sound/soc/soc-topology.c | 97 ++++++++++++++++++++++++----------------
 1 file changed, 58 insertions(+), 39 deletions(-)

base-commit: a5911ac5
--
2.25.1

Merge series "ASoC: codecs: add MAX98373 Soundwire driver" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:

V2 with a number of cleanups:
split between I2C and SoundWire modes, as done for rt5682, and updated
Kconfigs.
removed useless initializations common to both modes
removed idle_bias on
fixed register classified as volatile in error
fixed SPDX comments

Pierre-Louis Bossart (2):
  ASoC: codecs: max98373: split I2C and common parts
  ASoC: Intel: sof-sdw: add MAX98373 I2C dependencies

Ryan Lee (2):
  ASoC: codecs: max98373: Removed superfluous volume control from chip
    default
  ASoC: codecs: max98373: add SoundWire support

randerwang (2):
  ASoc: codecs: max98373: remove Idle_bias_on to let codec suspend
  ASoC: Intel: sdw_max98373: add card_late_probe support

 sound/soc/codecs/Kconfig                  |  20 +-
 sound/soc/codecs/Makefile                 |   4 +
 sound/soc/codecs/max98373-i2c.c           | 612 +++++++++++++++
 sound/soc/codecs/max98373-sdw.c           | 887 ++++++++++++++++++++++
 sound/soc/codecs/max98373-sdw.h           |  72 ++
 sound/soc/codecs/max98373.c               | 619 +--------------
 sound/soc/codecs/max98373.h               |  17 +-
 sound/soc/intel/boards/Kconfig            |   7 +-
 sound/soc/intel/boards/sof_sdw.c          |  19 +-
 sound/soc/intel/boards/sof_sdw_common.h   |   6 +
 sound/soc/intel/boards/sof_sdw_max98373.c |  12 +
 11 files changed, 1668 insertions(+), 607 deletions(-)
 create mode 100644 sound/soc/codecs/max98373-i2c.c
 create mode 100644 sound/soc/codecs/max98373-sdw.c
 create mode 100644 sound/soc/codecs/max98373-sdw.h

base-commit: a5911ac5
--
2.25.1

The DSP should be notified for device removal only if the
probe was successful. Fixes the following KASAN bug:
BUG: KASAN: null-ptr-deref in sof_ipc_tx_message+0x80/0x160 [snd_sof]
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200707204027.114169-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Idle_bias_on is used to decide bias on/off in standby state by dapm.
When Idle_bias_on is set to one, dapm will keep max98373 active at
idle time. Max98373 is doing nothing in this state, so remove
idle_bias_on setting to let max98373 get suspended when it is idle.
Signed-off-by: randerwang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ryan Lee <ryans.lee@maximintegrated.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200707205740.114927-4-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Volume control in probe function is not necessary.
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200707205740.114927-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

we need to free all allocated tlvs, not just the one allocated in
the loop before releasing kcontrols - other the tlvs references will
leak.

Fixes: 9f90af3a ('ASoC: topology: Consolidate and fix asoc_tplg_dapm_widget_*_create flow')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200707203749.113883-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When errors happens while loading graph components, the kernel oopses
while trying to remove all topology components. This can be
root-caused to a list pointing to memory that was already freed on
error.

remove_route() is already called on errors and will perform the
required cleanups so there's no need to free the route memory in
soc_tplg_dapm_graph_elems_load() if the route was added to the
list. We do however want to free the routes allocated but not added to
the list.

Fixes: 7df04ea7 ('ASoC: topology: modify dapm route loading routine and add dapm route unloading')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200707203749.113883-2-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This is identical with change for Intel platforms done with
commit 8c05246c ("ASoC: SOF: Intel: add min/max channels for SSP on Baytrail/Broadwell")
and fixes a regression on i.MX8/i.MX8M:

[   25.705750]  esai-Codec: ASoC: no backend playback stream
[   27.923378]  esai-Codec: ASoC: no users playback at close - state

This is root-caused to the introduction of the DAI capability checks
with snd_soc_dai_stream_valid(). Its use in soc-pcm.c makes it a
requirement for all DAIs to report at least a non-zero min_channels
field.

Fixes: 9b5db059 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200707210439.115300-4-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When SOF is used, the normal links are converted into DPCM ones. This
generates an error

[ 58.276668] bdw-rt5677 bdw-rt5677: CPU DAI spi-RT5677AA:00 for rtd
Wake on Voice does not support playback
[ 58.276676] bdw-rt5677 bdw-rt5677: ASoC: can't create pcm Wake on
Voice :-22

Fix by forcing the capture direction.

Fixes: b73287f0 ('ASoC: soc-pcm: dpcm: fix playback/capture checks')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Link: https://lore.kernel.org/r/20200707210439.115300-3-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a helper to walk through all the DAIs and set dpcm_playback and
dpcm_capture flags based on the DAIs capabilities, and use this helper
to avoid setting these flags arbitrarily in generic cards.

The commit referenced in the Fixes tag did not introduce the
configuration issue but will prevent the card from probing when
detecting invalid configurations.

Fixes: b73287f0 ('ASoC: soc-pcm: dpcm: fix playback/capture checks')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200707210439.115300-2-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add Shengjiu who's actively working on the latest fsl/nxp audio drivers.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20200707045829.10002-1-nicoleotsuka@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The ASoC devm_ functions that register a component
(devm_snd_soc_register_component and devm_snd_dmaengine_pcm_register) will
clean their component by running snd_soc_unregister_component.

snd_soc_unregister_component will then remove all the components for the
device that was used to register the component in the first place.

However, some drivers register several components (such as a DAI and a
dmaengine PCM) on the same device, and if the dmaengine PCM is registered
first, then the DAI will be cleaned up first and
snd_dmaengine_pcm_unregister will be called next.

snd_dmaengine_pcm_unregister will then lookup the dmaengine PCM component
on the device, and if there's one unregister that component and release its
dmaengine channels. That doesn't happen in practice though since the first
call to snd_soc_unregister_component removed all the components, so we
never get the chance to release the dmaengine channels.

In order to fix this, instead of removing all the components for a given
device, we can simply remove the component that was registered in the first
place. We should have the same number of component registration than we
have components, so it should work just fine.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200707074237.287171-1-maxime@cerno.techSigned-off-by: Mark Brown <broonie@kernel.org>

I hand over the maintenance of these drivers to my colleagues. Claudiu,
Codrin and Tudor already have experience with these controllers and
sub-systems.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20200702134224.3750-1-nicolas.ferre@microchip.comSigned-off-by: Mark Brown <broonie@kernel.org>

The following build warnings are seen with 'make dt_binding_check':

Documentation/devicetree/bindings/sound/simple-card.example.dts:209.46-211.15: Warning (unit_address_vs_reg): /example-4/sound/simple-audio-card,cpu@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:213.37-215.15: Warning (unit_address_vs_reg): /example-4/sound/simple-audio-card,cpu@1: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:250.42-261.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:263.42-288.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:270.32-272.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:273.23-275.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@1: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:276.23-278.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@2: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:279.23-281.19: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@1/cpu@3: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/sound/simple-card.example.dts:290.42-303.15: Warning (unit_address_vs_reg): /example-5/sound/simple-audio-card,dai-link@2: node has a unit name, but no reg or ranges property

Fix them all.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200630223020.25546-1-festevam@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

S8 and S24 formats does not work on this machine driver so force to use
S16_LE instead.

In addition, add constraint to limit the max value of rate because the
rate higher than 96000(172000, 192000) is not stable either.
Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Link: https://lore.kernel.org/r/20200630091615.4020059-1-yuhsuan@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

When snd_pci_acp3x driver loads we see:

WARNING kernel:snd_pci_acp3x 0000:04:00.5: Unbalanced pm_runtime_enable!
at boot time.
same can be observed in /var/log/messages/.

Modifying pm runtime sequence for fixing unbalanced pm issue.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/20200630092242.7799-1-Vishnuvardhanrao.Ravulapati@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Base on https://patchwork.kernel.org/patch/11237953/
Soundwire mode also should follow it.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200701071645.32061-1-oder_chiou@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB,
not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace
apps which translate the dB scale to a linear scale. With the logarithmic
dB scale being of by a factor of 10 we loose all precision in the lower
area of the range when apps translate things to a linear scale.

E.g. the 0 dB default, which corresponds with a value of 47 of the
0 - 127 range for the control, would be shown as 0/100 in alsa-mixer.

Since the centi-dB values used in the TLV struct cannot represent the
0.375 dB step size used by these controls, change the TLV definition
for them to specify a min and max value instead of min + stepsize.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200628155231.71089-5-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>