- 07 Nov, 2019 7 commits
-
-
Ajay Joshi authored
Implement REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH support to allow explicit control of zone states. Contains contributions from Matias Bjorling, Hans Holmberg, Keith Busch and Damien Le Moal. Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Ajay Joshi <ajay.joshi@wdc.com> Signed-off-by:
Matias Bjorling <matias.bjorling@wdc.com> Signed-off-by:
Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by:
Keith Busch <kbusch@kernel.org> Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Ajay Joshi authored
Implement REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH support to allow explicit control of zone states. Contains contributions from Matias Bjorling, Hans Holmberg and Damien Le Moal. Acked-by:
Mike Snitzer <snitzer@redhat.com> Reviewed-by:
-
Jens Axboe authored
Pull in dependencies for the new zoned open/close/finish support. * for-5.5/block: (32 commits) block: add zone open, close and finish ioctl support block: add zone open, close and finish operations block: Simplify REQ_OP_ZONE_RESET_ALL handling block: Remove REQ_OP_ZONE_RESET plugging block: Warn if elevator= parameter is used block: avoid blk_bio_segment_split for small I/O operations blk-mq: make sure that line break can be printed block: sed-opal: Introduce Opal Datastore UID block: sed-opal: Add support to read/write opal tables generically block: sed-opal: Generalizing write data to any opal table bdev: Refresh bdev size for disks without partitioning bdev: Factor out bdev revalidation into a common helper blk-mq: avoid sysfs buffer overflow with too many CPU cores blk-mq: Make blk_mq_run_hw_queue() return void fcntl: fix typo in RWH_WRITE_LIFE_NOT_SET r/w hint name blk-mq: fill header with kernel-doc blk-mq: remove needless goto from blk_mq_get_driver_tag block: reorder bio::__bi_remaining for better packing block: Reduce the amount of memory used for tag sets block: Reduce the amount of memory required per request queue ...
-
Ajay Joshi authored
Introduce three new ioctl commands BLKOPENZONE, BLKCLOSEZONE and BLKFINISHZONE to allow applications to control the condition of zones on a zoned block device through the execution of the REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH operations. Contains contributions from Matias Bjorling, Hans Holmberg, Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig. Reviewed-by:
Javier González <javier@javigon.com> Reviewed-by:
Dmitry Fomichev <dmitry.fomichev@wdc.com> Signed-off-by:
-
Ajay Joshi authored
Zoned block devices (ZBC and ZAC devices) allow an explicit control over the condition (state) of zones. The operations allowed are: * Open a zone: Transition to open condition to indicate that a zone will actively be written * Close a zone: Transition to closed condition to release the drive resources used for writing to a zone * Finish a zone: Transition an open or closed zone to the full condition to prevent write operations To enable this control for in-kernel zoned block device users, define the new request operations REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE and REQ_OP_ZONE_FINISH as well as the generic function blkdev_zone_mgmt() for submitting these operations on a range of zones. This results in blkdev_reset_zones() removal and replacement with this new zone magement function. Users of blkdev_reset_zones() (f2fs and dm-zoned) are updated accordingly. Contains contributions from Matias Bjorling, Hans Holmberg, Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig. Reviewed-by:
-
Damien Le Moal authored
There is no need for the function __blkdev_reset_all_zones() as REQ_OP_ZONE_RESET_ALL can be handled directly in blkdev_reset_zones() bio loop with an early break from the loop. This patch removes this function and modifies blkdev_reset_zones(), simplifying the code. Reviewed-by:
-
Damien Le Moal authored
REQ_OP_ZONE_RESET operations cannot be merged as these bios and requests do not have a size and are never sequential due to the zone start sector position required for their execution. As a result, there is no point in using a plug around blkdev_reset_zones() bio issuing loop. This patch removes this unnecessary plugging. Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by:
-
- 06 Nov, 2019 1 commit
-
-
Jan Kara authored
With transition to blk-mq, the elevator= kernel argument was removed as it makes less and less sense with the current variety of devices. Since this may surprise some users and there are advices on the Internet that still suggest to use it, let's at least warn if the parameter is used. Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
- 05 Nov, 2019 1 commit
-
-
Christoph Hellwig authored
__blk_queue_split() adds significant overhead for small I/O operations. Add a shortcut to avoid it for cases where we know we never need to split. Based on a patch from Ming Lei. Signed-off-by:
-
- 04 Nov, 2019 31 commits
-
-
Prabhath Sajeepa authored
Check validity of offset into ANA log buffer before accessing nvme_ana_group_desc. This check ensures the size of ANA log buffer >= offset + sizeof(nvme_ana_group_desc) Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Prabhath Sajeepa <psajeepa@purestorage.com> Signed-off-by:
-
Christoph Hellwig authored
bio_set_op_attrs has been long deprecated, replace it with a direct assignment of the flags to bio->bi_opf. Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Christoph Hellwig authored
With reference to the following issue reported on the mailing list :- http://lists.infradead.org/pipermail/linux-nvme/2019-October/027604.html this patch adds plugging for the bdev-ns under nvmet_bdev_execute_rw(). We can see the following performance improvement in random write workload I/Os with the setup described in the link when device_path configured as /dev/md0. Without this patch :- write: IOPS=40.8k, BW=159MiB/s (167MB/s)(4777MiB/30002msec) write: IOPS=41.2k, BW=161MiB/s (169MB/s)(4831MiB/30011msec) slat (usec): min=8, max=10823, avg=15.64, stdev=16.85 slat (usec): min=8, max=401, avg=15.40, stdev= 9.56 clat (usec): min=54, max=2492, avg=759.07, stdev=172.62 clat (usec): min=56, max=1997, avg=768.06, stdev=178.72 With this patch :- write: IOPS=123k, BW=480MiB/s (504MB/s)(14.1GiB/30011msec) write: IOPS=123k, BW=481MiB/s (504MB/s)(14.1GiB/30002msec) slat (usec): min=8, max=9941, avg=13.31, stdev= 8.04 slat (usec): min=8, max=289, avg=13.31, stdev= 3.37 clat (usec): min=43, max=17635, avg=245.46, stdev=171.23 clat (usec): min=44, max=17751, avg=245.25, stdev=183.14 Reviewed-by:
-
Christoph Hellwig authored
Move the special cases for fabrics commands and the discovery controller to nvmet_parse_admin_cmd in preparation for adding passthrough support. Reviewed-by:
-
Geert Uytterhoeven authored
Fix misspelling of "rediscovered". Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Sagi Grimberg authored
Discovery controllers need this information as well. Signed-off-by:
-
Christoph Hellwig authored
Now that nvmet_req_execute does nothing, open code it. Reviewed-by:
Logan Gunthorpe <logang@deltatee.com> Signed-off-by:
-
Christoph Hellwig authored
Instead of storing the expected length and checking it when it's executed, just check the length inside the command themselves. A new helper, nvmet_check_data_len() is created to help with this check. Signed-off-by:
-
Christoph Hellwig authored
Similar to the nvmet_rw_len helper. Reviewed-by:
-
Christoph Hellwig authored
Push the lid and cns check into their respective handlers and, while we're at it, rename the functions to be consistent with other discovery handlers. Signed-off-by:
-
Christoph Hellwig authored
Instead of picking the sub-command handler to execute in a nested switch statement introduce a landing functions that calls out to the appropriate sub-command handler. This will allow us to have a common place in the handler to check the transfer length in a future patch. Reviewed-by:
-
Logan Gunthorpe authored
It's not apprporiate for the transports to set the data_len field of the request which is only used by the core. In this case, just use a variable on the stack to store the length of the sgl for comparison. Reviewed-by:
-
Logan Gunthorpe authored
None of the other transports check data_len which is verified in core code. The function should instead check that the sgl length is non-zero. Reviewed-by:
-
Damien Le Moal authored
Introduce the new helper function nvme_lba_to_sect() to convert a device logical block number to a 512B sector number. Use this new helper in obvious places, cleaning up the code. Reviewed-by:
-
Damien Le Moal authored
Rename nvme_block_nr() to nvme_sect_to_lba() and use SECTOR_SHIFT instead of its hard coded value 9. Also add a comment to decribe this helper. Reviewed-by:
-
Revanth Rajashekar authored
Update enumerations and structures in include/linux/nvme.h to resync with the nvmecli. All the updates are mentioned in the ratified NVMe 1.4 spec https://nvmexpress.org/wp-content/uploads/NVM-Express-1_4-2019.06.10-Ratified.pdfReviewed-by:
Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by:
-
Max Gurtovoy authored
nvme_cleanup_cmd should be called for each call to nvme_setup_cmd (symmetrical functions). Move the call for nvme_cleanup_cmd to the common core layer and call it during nvme_complete_rq for the good flow. For error flow, each transport will call nvme_cleanup_cmd independently. Also take care of a special case of path failure, where we call nvme_complete_rq without doing nvme_setup_cmd. Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
-
Max Gurtovoy authored
Fix the status code of canceled requests initiated by the host according to TP4028 (Status Code 0x371): "Command Aborted By host: The command was aborted as a result of host action (e.g., the host disconnected the Fabric connection)." Also in a multipath environment, unless otherwise specified, errors of this type (path related) should be retried using a different path, if one is available. Signed-off-by:
-
Israel Rukshin authored
The calls to nvmet_req_alloc_sgl and rdma_rw_ctx_init should usually succeed, so add this simple optimization to the fast path. Signed-off-by:
Israel Rukshin <israelr@mellanox.com> Reviewed-by:
-
Israel Rukshin authored
The call to sgl_alloc shouldn't fail so add this simple optimization to the fast path. Signed-off-by:
-
Israel Rukshin authored
This commit doesn't change any logic. Signed-off-by:
-
Israel Rukshin authored
This function improves code readability and reduces code duplication. Signed-off-by:
-
James Smart authored
Code today only clears the association_id if a Disconnect LS is transmit. Remove ambiguity and unconditionally clear the association_id if the association has been terminated. Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
James Smart authored
Change wording on a couple of messages to clarify what happened. Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
James Smart authored
Set the new category field in the FC-NVME CMND_IU based on queue number. Signed-off-by:
-
James Smart authored
Sync sources with revised structure and field names to correspond with FC-NVME-2 header sync-up. Tested interoperability with success: - prior initiator with new target - prior target with new initiator - new on new Signed-off-by:
-
James Smart authored
Sync the header to FC-NVME-2 r1.06 (T11-2019-00210-v001). Includes some minor mods where pre-release field names changed by the time the spec was released. Signed-off-by:
-
Ming Lei authored
8962842c ("blk-mq: avoid sysfs buffer overflow with too many CPU cores") avoids sysfs buffer overflow, and reserves one character for line break. However, the last snprintf() doesn't get correct 'size' parameter passed in, so fixed it. Fixes: 8962842c ("blk-mq: avoid sysfs buffer overflow with too many CPU cores") Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Revanth Rajashekar authored
This patch introduces Opal Datastore UID. The generic read/write table ioctl can use this UID to access the Opal Datastore. Reviewed-by:
Scott Bauer <sbauer@plzdonthack.me> Reviewed-by:
Jon Derrick <jonathan.derrick@intel.com> Signed-off-by:
-
Revanth Rajashekar authored
This feature gives the user RW access to any opal table with admin1 authority. The flags described in the new structure determines if the user wants to read/write the data. Flags are checked for valid values in order to allow future features to be added to the ioctl. The user can provide the desired table's UID. Also, the ioctl provides a size and offset field and internally will loop data accesses to return the full data block. Read overrun is prevented by the initiator's sec_send_recv() backend. The ioctl provides a private field with the intention to accommodate any future expansions to the ioctl. Reviewed-by:
-
Revanth Rajashekar authored
This patch refactors the existing "write_shadowmbr" func and creates a new generalized function "generic_table_write_data", to write data to any opal table. Also, a few cleanups are included in this patch. Reviewed-by:
-
