Nuvoton-cir utilizes the encoding capabilities of rc-core to convert
scancodes from user space to pulse/space format understood by the
underlying hardware.

Converted samples are then written to the wakeup fifo along with other
necessary configuration to enable wake up functionality.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: James Hogan <james@albanarts.com>
Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Add the s_wakeup_filter callback to the rc-loopback driver, which instead of
setting the filter just feeds the scancode back through the input device
so that it can be verified.
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Add support in rc-core for drivers which implement the wakeup scancode
filter by encoding the scancode using the raw IR encoders. This is by
way of rc_dev::encode_wakeup which should be set to true to make the
allowed wakeup protocols the same as the set of raw IR encoders.

As well as updating the sysfs interface to know which wakeup protocols
are allowed for encode_wakeup drivers, also ensure that the IR
decoders/encoders are loaded when an encode_wakeup driver is registered.
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Add the capability to encode RC-6 and RC-6A scancodes as raw events.
The protocol is chosen based on the specified protocol mask, and
whether all the required bits are set in the scancode mask, and none of
the unused bits are set in the scancode data.

The Manchester modulation helper is used several times with various
timings so that RC-6 header preamble, the header, header trailing bit
and the data itself can be modulated correctly.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Cc: James Hogan <james@albanarts.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Add the capability to encode RC-5, RC-5X and RC-5-SZ scancodes as raw
events. The protocol is chosen based on the specified protocol mask,
and whether all the required bits are set in the scancode mask, and
none of the unused bits are set in the scancode data. For example a
scancode filter with bit 16 set in both data and mask is unambiguously
RC-5X.

The Manchester modulation helper is used, and for RC-5X it is used twice
with two sets of timings, the first with a short trailer space for the
space in the middle, and the second with no leader so that it can
continue the space.

The encoding in RC-5-SZ first inserts a pulse and then simply utilizes
the generic Manchester encoder available in rc-core.
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Adding a simple Manchester encoder to rc-core.
Manchester coding is used by at least RC-5 and RC-6 protocols and their
variants.
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Signed-off-by: James Hogan <james@albanarts.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Add a callback to raw ir handlers for encoding and modulating a scancode
to a set of raw events. This could be used for transmit, or for
converting a wakeup scancode filter to a form that is more suitable for
raw hardware wake up filters.
Signed-off-by: James Hogan <james@albanarts.com>
Signed-off-by: Antti Seppälä <a.seppala@gmail.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Rename state to dev.
Correct some indentations.
Remove FSF address.
Fix some style issues reported by checkpatch.pl.
Correct some style issues I liked.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Update synthesizer calculation to model I prefer nowadays. It is mostly
just renaming some variables, but also minor functionality change how
integer and fractional part are divided (using div_u64_rem()). Also, add
'schematic' of synthesizer following my current understanding.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Rename state from s to dev. Rename some other things. Fix indentations.
Disable driver unbind via sysfs.

indentation prevent unload
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Update synthesizer calculation to model I prefer nowadays. It is mostly
just renaming some variables, but also minor functionality change how
integer and fractional part are divided (using div_u64_rem()). Also, add
'schematic' of synthesizer following my current understanding.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix an oops during device initialization by correctly setting size_of_priv
instead of leaving it 0.
The regression was introduced by 8abe4a0a ("[media] dib7000:
export just one symbol") and only fixed for one type of dib0700 based
devices in 9e334c75 ("[media] Fix regression in some dib0700
based devices").

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=92301

Fixes: 8abe4a0a ("[media] dib7000: export just one symbol")

Cc: stable@vger.kernel.org # for version 3.17+
Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

If the streaming_ctrl is called to enable TS before demod has locked
the TS will be empty. Copied the solution from the dvbsky driver for the
TechnoTrend S2-4600 device: when the state changes from unlock to
lock, call su3000_streaming_ctrl again.
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

While reading the MAC address for SU3000-based devices the system was
printing excessive debug information in the logs:

Output before the patch:

[ 1515.780692] bc 00 00 00 00 00
[ 1515.781440] bc ea 00 00 00 00
[ 1515.782251] bc ea 2b 00 00 00
[ 1515.783094] bc ea 2b 46 00 00
[ 1515.783816] bc ea 2b 46 12 00
[ 1515.784565] bc ea 2b 46 12 92
[ 1515.784571] dvb-usb: MAC address: bc:ea:2b:46:12:92

Output after the patch:

[ 3803.495706] dvb-usb: MAC address: bc:ea:2b:46:12:92
Signed-off-by: Olli Salonen <olli.salonen@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

SRVM_MAX_PID_FILTERS was defined in 2 sms_tx_stats structures
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The platform_device_id is not modified by the driver and core uses it as
const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Fix the 0x0x prefix in integer constants.

In this case a padding 0 must also be inserted to make the constants
look like all the other 16 bits ones.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

My static checker warns that the name of the port can be 15 characters
when you consider the NUL terminator and that's one more than the 14
characters in name[].  Maybe it's an off-by-one?

It's unlikely that we hit the limit and even if we do the overflow will
only affect one of the two bytes of padding so it's harmless.  Still
let's fix it and also change the sprintf() to snprintf().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Building for avr32 leads the following build warning:

drivers/media/rc/st_rc.c:270: warning: passing argument 1 of 'IS_ERR' discards qualifiers from pointer target type
drivers/media/rc/st_rc.c:271: warning: passing argument 1 of 'PTR_ERR' discards qualifiers from pointer target type

devm_ioremap_resource() returns void __iomem *, so change 'base' and
'rx_base' definitions accordingly.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Building for avr32 leads the following build warning:

drivers/media/rc/ir-hix5hd2.c:221: warning: passing argument 1 of 'IS_ERR' discards qualifiers from pointer target type
drivers/media/rc/ir-hix5hd2.c:222: warning: passing argument 1 of 'PTR_ERR' discards qualifiers from pointer target type

devm_ioremap_resource() returns void __iomem *, so change 'base' definition
accordingly.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

In a rarely hit randconfig case, the r820t tuner driver can
get built when CONFIG_BITREVERSE is not selected by any
other driver, resulting in this error:

drivers/built-in.o: In function `r820t_read.constprop.3':
:(.text+0xa0594): undefined reference to `byte_rev_table'

For consistency, this adds the 'select BITREVERSE' that
all other similar drivers have.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Without i2c, we can get a build error:

drivers/media/platform/exynos4-is/fimc-is-i2c.c: In function 'fimc_is_i2c_probe':
drivers/media/platform/exynos4-is/fimc-is-i2c.c:58:8: error: implicit declaration of function 'i2c_add_adapter' [-Werror=implicit-function-declaration]

The dependency already exists for exynos-fimc-lite and s5p-fimc,
but is missing for exynos4-fimc.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Several lines touched by the pr_foo refactoring patches are not
following the Linux Coding style.

While we won't be fixing the style globally at the driver, we should,
at least, fix on the lines we touched.

Basically, this patch add (or remove) whitespaces and blank lines
where needed.

No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The debug macros are not properly defined, as they generate warnings
like:

ERROR: Macros with complex values should be enclosed in parentheses
+#define core_dbg(fmt, arg...)    if (core_debug) \
+	printk(KERN_DEBUG pr_fmt("core: " fmt), ## arg)

Use do { } while (0) for those macros.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of using printk(), use pr_foo() macros.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of implement its own hexdump logic, use the printk
format, and convert to use pr_info().
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Rename the macros to input_dbg() and ir_dbg(), using pr_fmt()
on both, to be coherent with the other debug macro changes.

The ir_dbg() also prints the IR name.

I'm not sure if it is a good idea to keep both macros here,
but merging them would require tests on different flavors of
saaa7134-based boards.

So, for now, let's keep both.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

rename the macro to vbi_dbg()/video_dbg() and use pr_fmt(),
to be coherent with the other debug macro changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

use just one macro instead of 2, naming it as audio_dbg() and
using pr_fmt().
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

instead of using dev->name, let's use pr_fmt() like on the
other parts of saa7134. Also, rename the debug macro to
ts_dbg() to match the namespace for the debug macros.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Converting debug prints to use pr_foo() is not trivial, as the
result will be a way worse than what's provided here, due to the
pieces of the code that prints the I2C transfers. Those use a
lot pr_cont(), and, depending on using either level 1 or 2,
a different set of macros are selected.

So, let's replace d1printk() and d2printk() macros by i2c_dbg()
and i2c_count() adding a debug level there.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

On media drivers, debugging messages should be grouped into
categories, as this makes easier to debug the driver.

In the case of saa7134, the core has 2 debug categories, one
for IRQ, and another one for the core itself. The IRQ have
actually 2 levels of debug.

So, instead of using pr_dbg(), where everything would be in
the same box, let's define two macros that use pr_fmt(),
one for the core, and another one for irq.

With that, we can replace the remaining printk() occurrences
at the core to use either core_dbg() or irq_dbg(), depending
on the group of debug macros that need to be enabled.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

On a few places, mostly during board detection, some printk()
macros were called without especifying any message level.

Those are actually warnings. So, use pr_warn() for them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

As this module doesn't use any debug level, it is easy to
just replace all debug printks by pr_debug().
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

As this module doesn't use any debug level, it is easy to
just replace all debug printks by pr_debug().
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

wprintk() macro is now just a wrapper for pr_warn(). Get rid of
it!
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

On saa7134-alsa, there is just one printk macro that use a
different debug level.

It should be easy to enable/disable this one using dynamic_printk,
if one need to individually control it.

So, this module can easily use pr_debug() instead of using its
own macros.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

On a few places, the search expression used on the script that
replaced pr_info/pr_warn didn't match, because the string were
on the next line.

It is best to manually edit those lines, and re-indent the
paragraphs.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Replaces all occurrences of printk with KERN_INFO, KERN_WARNING
and KERN_ERR to pr_info/pr_warning, pr_err, using this small
shell script:

for i in drivers/media/pci/saa7134/*.[ch]; do sed s,'printk(KERN_INFO ','pr_info(',g <$i >a && mv a $i; done
for i in drivers/media/pci/saa7134/*.[ch]; do sed s,'printk(KERN_ERR ','pr_err(',g <$i >a && mv a $i; done
for i in drivers/media/pci/saa7134/*.[ch]; do sed s,'printk(KERN_WARNING ','pr_warn(',g <$i >a && mv a $i; done
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Add a pr_fmt macro, and move saa7134.h header to the beginning,
to avoid warnings when using the pr_foo macros.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>